This project uses semantic versioning.
The version identifier uses an additional custom element (MAJOR.MINOR.PATCH.custom)
to track individual changes. The identifier is incremented by every core hardware modification
and also by major software and/or general project changes.
The version identifier is globally defined by the hw_version_c constant in the main VHDL
package file.
Software can determine the version by reading the RISC-V-compatible mimpid CSR, which uses
a 8x4-bit BCD (binary-coded decimal) format to represent the current version. Example:
mimpid = 0x01040312 -> Version 01.04.03.12 -> v1.4.3.12
- 🐛 bug-fix
- ✨ new feature
- 🧪 new experimental feature
⚠️ changes that might impact compatibility with previous versions- 🔒 security/safety-related
- 🚀 official release
- Date format is "dd.mm.yyyy"
| Date | Version | Comment | Ticket |
|---|---|---|---|
| 26.11.2024 | 1.10.6.7 | 🐛 fix some HDL issues that caused problems when auto-converting to Verilog | #1103 |
| 23.11.2024 | 1.10.6.6 | CPU control: large code edits and cleanups | #1099 |
| 10.11.2024 | 1.10.6.5 | riscv-none-elf- as default gcc prefix) |
#1091 |
| 10.11.2024 | 1.10.6.4 | rework default processor testbench | #1093 |
| 06.11.2024 | 1.10.6.3 | minor rtl edits and cleanups | #1090 |
| 02.11.2024 | 1.10.6.2 | #1086 | |
| 01.11.2024 | 1.10.6.1 | 🧪 convert VHDL memory images into full-scale VHDL packages | #1084 |
| 26.10.2024 | 🚀1.10.6 | New release | |
| 26.10.2024 | 1.10.5.11 | cleanup central makefile and linker script | #1077 |
| 21.10.2024 | 1.10.5.10 | 🧪 rework linker script's ROM/IMEM default size (=16kB); add customization variable to all makefiles in sw/example |
#1072 |
| 20.10.2024 | 1.10.5.9 | EIP |
#1071 |
| 18.10.2024 | 1.10.5.8 | minor RTL code cleanups | #1068 |
| 18.10.2024 | 1.10.5.7 | use individual/new module for XBUS-to-AXI4-Lite bridge | #1063 |
| 12.10.2024 | 1.10.5.6 | OCD_DM_LEGACY_MODE generic) |
#1056 |
| 11.10.2024 | 1.10.5.5 | ✨ 🔒 add support for optional on-chip debugger authentication; |
#1053 |
| 06.10.2024 | 1.10.5.4 | #1049 | |
| 05.10.2024 | 1.10.5.3 | upgrade neoTRNG to version 3.2 | #1048 |
| 03.10.2024 | 1.10.5.2 | A ISA extensions; replaced by new Zalrsc ISA extension |
#1047 |
| 02.10.2024 | 1.10.5.1 | #1046 | |
| 01.10.2024 | 🚀1.10.5 | New release | |
| 30.09.2024 | 1.10.4.11 | B ISA extensions into individual sub-extensions: Zba, Zbb, Zbs |
#1044 |
| 29.09.2024 | 1.10.4.10 | CPU_EXTENSION_* -> RISCV_ISA_* |
#1041 |
| 28.09.2024 | 1.10.4.9 | ✨ add support for RISC-V "ShangMi algorithm suite" ISA extensions: Zks, Zksed, Zksh |
#1040 |
| 28.09.2024 | 1.10.4.8 | ✨ add support for RISC-V "NIST algorithm suite" ISA extension Zkn |
#1039 |
| 27.09.2024 | 1.10.4.7 | ✨ add support for RISC-V "carry-less multiplication instruction for cryptography" ISA extension Zbkc |
#1038 |
| 27.09.2024 | 1.10.4.6 | ✨ add support for RISC-V "bit manipulation instructions for cryptography" ISA extension Zbkb |
#1037 |
| 27.09.2024 | 1.10.4.5 | ✨ add support for RISC-V "data independent execution time" ISA extension Zkt |
#1036 |
| 25.09.2024 | 1.10.4.4 | ✨ add support for RISC-V "scalar cryptography" ISA extensions Zbkx, Zknd, Zkne, Zknh |
#1033 |
| 23.09.2024 | 1.10.4.3 | rework/optimize ALU instruction decoding and CPU co-processor interface | #1032 |
| 20.09.2024 | 1.10.4.2 | 🐛 fix minor bug in FPU's multiplication instruction (invalid-check logic if any operand is sNAN) | #1028 |
| 20.09.2024 | 1.10.4.1 | rtl signal renamings to make the code more readable | #1026 |
| 16.09.2024 | 🚀1.10.4 | New release | |
| 15.09.2024 | 1.10.3.10 | 🐛 SW: fix stack-alignment (has to be 128-bit-aligned) before entering the very first procedure (main) |
#1021 |
| 14.09.2024 | 1.10.3.9 | massive rtl code cleanup | #1019 |
| 14.09.2024 | 1.10.3.8 | 🐛 fix b.ctz instruction decoding (bug introduced in v1.10.3.6) |
#1018 |
| 14.09.2024 | 1.10.3.7 | #1017 | |
| 13.09.2024 | 1.10.3.6 | cleanup and extend watchdog's reset-cause identification logic | #1015 |
| 13.09.2024 | 1.10.3.5 | rtl code cleanups; minor CPU control optimizations | #1014 |
| 08.09.2024 | 1.10.3.4 | minor rtl/CSR optimizations | #1010 |
| 08.09.2024 | 1.10.3.3 | optimize CSR address logic (to reduce switching activity) | #1008 |
| 05.09.2024 | 1.10.3.2 | 🧪 Remove "for loop" construct from memory initialization function as the max. number of loop/unrolling iterations might be constrained | #1005 |
| 05.09.2024 | 1.10.3.1 | minor CPU RTL cleanups and optimizations | #1004 |
| 03.09.2024 | 🚀1.10.3 | New release | |
| 30.08.2024 | 1.10.2.9 | 🐛 fix PC reset bug (introduced in v1.10.2.8); minor RTL optimizations (size and critical path) | #998 |
| 25.08.2024 | 1.10.2.8 | mocunteren bits (CY and IR) rework Vivado IP module; minor RTL cleanups and optimization |
#996 |
| 16.08.2024 | 1.10.2.7 | minor CPU area and critical path optimizations; minor code cleanups | #990 |
| 09.08.2024 | 1.10.2.6 | rtl/core; remove mem sub-folder |
#985 |
| 09.08.2024 | 1.10.2.5 | minor HDL edits | #984 |
| 06.08.2024 | 1.10.2.4 | #980 | |
| 05.08.2024 | 1.10.2.3 | 🐛 fix bug in Vivado IP module (error if zero-sized input port is unconnected) | #978 |
| 04.08.2024 | 1.10.2.2 | 🐛 fix bug in Vivado IP module (error if AXI port is unconnected) | #976 |
| 02.08.2024 | 1.10.2.1 | #971 | |
| 29.07.2024 | 🚀1.10.2 | New release | |
| 28.07.2024 | 1.10.1.9 | make SYSINFO.CLK read/write | #966 |
| 21.07.2024 | 1.10.1.8 | 🔒 restrict IO access to privileged (machine-mode) software | #958 |
| 20.07.2024 | 1.10.1.7 | 🐛 fix bug in sbrk newlib system call (causing malloc to provide infinite memory until heap and stack collide) |
#957 |
| 20.07.2024 | 1.10.1.6 | SDI: remove explicit "RX clear flag"; add new flag to check the current state of the chip-select input | #955 |
| 19.07.2024 | 1.10.1.5 | ✨ add "programmable" chip-select enable/disable functionality to SPI module | #954 |
| 19.07.2024 | 1.10.1.4 | 🐛 fix SDI "TX FIFO full" flag | #953 |
| 18.07.2024 | 1.10.1.3 | 🧪 add new generic to disable the SYSINFO module (IO_DISABLE_SYSINFO |
#952 |
| 10.07.2024 | 1.10.1.2 | minor rtl edits and cleanups | #948 |
| 05.07.2024 | 1.10.1.1 | minor rtl cleanups and optimizations | #941 |
| 04.07.2024 | 🚀1.10.1 | New release | |
| 04.07.2024 | 1.10.0.10 | #939 | |
| 03.07.2024 | 1.10.0.9 | AMO_RVS_GRANULARITY generic, reservation set granularity is now fixed to 4 bytes |
#938 |
| 03.07.2024 | 1.10.0.8 | 🧪 add XBUS to AHB3-lite bridge | #937 |
| 02.07.2024 | 1.10.0.7 | minor rtl and software edits and cleanups | #936 |
| 30.06.2024 | 1.10.0.6 | minor rtl edits and cleanups | #935 |
| 29.06.2024 | 1.10.0.5 | #932 | |
| 23.06.2024 | 1.10.0.4 | minor rtl edits/cleanups | #931 |
| 22.06.2024 | 1.10.0.3 | UARTs: add flags to clear RX/TX FIFOs; DMA: add FIRQ trigger type configuration flag | #930 |
| 21.06.2024 | 1.10.0.2 | minor code rtl clean-ups; fix some missing TOP defaults | #929 |
| 17.06.2024 | 1.10.0.1 | jtag_trst_i |
#928 |
| 16.06.2024 | 🚀1.10.0 | New release | |
| 15.06.2024 | 1.9.9.9 | ✨ add pre-configured example project for Eclipse IDE | #926 |
| 14.06.2024 | 1.9.9.8 | minor rtl edits/cleanups; increase bootloader's auto-boot timeout from 8s to 10s | #925 |
| 07.06.2024 | 1.9.9.7 | ✨ re-add TRNG "data available" interrupt | #922 |
| 31.05.2024 | 1.9.9.6 | add "tag" signal to XBUS to provide additional access information (compatible to the AXI4 ARPROT and AWPROT signals) | #917 |
| 30.05.2024 | 1.9.9.5 | 🐛 fix uncached-vs-cached memory accesses (do not interrupt cache bursts by direct/uncached memory accesses) | #915 |
| 29.05.2024 | 1.9.9.4 | Vivado IP block: add resizing ports for GPIOs, XIRQs and PWM; split size configuration for GPIO inputs and outputs | #913 |
| 27.05.2024 | 1.9.9.3 | removed XIRQ_TRIGGER_* generics; XIRQ trigger type is now programmable by dedicated configuration registers |
#911 |
| 21.05.2024 | 1.9.9.2 | ✨ add SLINK routing information ports (compatible to AXI-stream's TID and TDEST signals) |
#908 |
| 04.05.2024 | 1.9.9.1 | ✨ add NEORV32 as Vivado IP block | #894 |
| 03.05.2024 | 🚀1.9.9 | New release | |
| 02.05.2024 | 1.9.8.10 | 🐛 fix UART receiver bug (introduced in v1.9.8.7) | #891 |
| 01.05.2024 | 1.9.8.9 | minor rtl cleanups (cleanup boolean expressions) | #889 |
| 27.04.2024 | 1.9.8.8 | fix delayed halt when single-stepping into an exception | #887 |
| 24.04.2024 | 1.9.8.7 | minor RTL fixes | #883 |
| 23.04.2024 | 1.9.8.6 | 🐛 fix on-chip-debugger external-halt-request vs. exception concurrency | #882 |
| 21.04.2024 | 1.9.8.5 | rtl cleanups and (area) optimizations | #880 |
| 16.04.2024 | 1.9.8.4 | #877 | |
| 15.04.2024 | 1.9.8.3 | #876 | |
| 14.04.2024 | 1.9.8.2 | #874 | |
| 13.04.2024 | 1.9.8.1 | minor rtl code cleanups and optimizations | #872 |
| 04.04.2024 | 🚀1.9.8 | New release | |
| 04.04.2024 | 1.9.7.10 | extend SPI and SDI interrupt conditions | #870 |
| 04.04.2024 | 1.9.7.9 | RISC-V B ISA extension (bit-manipulation) only contains sub-extensions Zba+Zbb+Zbs; Zbc ISA extension |
#869 |
| 03.04.2024 | 1.9.7.8 | split SLINK interrupt into two individual FIRQs (SLINK RX and SLINK TX) | #868 |
| 01.04.2024 | 1.9.7.7 | add back TWI clock stretching option | #867 |
| 26.03.2024 | 1.9.7.6 | #865 | |
| 24.03.2024 | 1.9.7.5 | mip CSR is now read-only ; 🐛 fix DMA fence configuration flag |
#864 |
| 23.03.2024 | 1.9.7.4 | #860 | |
| 23.03.2024 | 1.9.7.3 | #859 | |
| 23.03.2024 | 1.9.7.2 | #858 | |
| 23.03.2024 | 1.9.7.1 | CPU hardware optimization (reduced hardware footprint, shortened critical path) | #857 |
| 22.03.2024 | 🚀1.9.7 | New release | |
| 18.03.2024 | 1.9.6.9 | ✨ update CFU example: now implementing the Extended Tiny Encryption Algorithm (XTEA) | #855 |
| 16.03.2024 | 1.9.6.8 | rework cache system: L1 + L2 caches, all based on the generic cache component | #853 |
| 16.03.2024 | 1.9.6.7 | cache optimizations: add read-only option, add option to disable direct/uncached accesses | #851 |
| 15.03.2024 | 1.9.6.6 | #850 | |
| 14.03.2024 | 1.9.6.5 | ✨ add optional external bus interface cache (XCACHE) | #849 |
| 12.03.2024 | 1.9.6.4 | wb_* -> xbus_*) |
#846 |
| 11.03.2024 | 1.9.6.3 | #845 | |
| 10.03.2024 | 1.9.6.2 | minor rtl clean-ups, optimizations and fixes | #843 |
| 09.03.2024 | 1.9.6.1 | add generic cache module (not used yet) | #842 |
| 01.03.2024 | 🚀1.9.6 | New release | |
| 25.02.2024 | 1.9.5.10 | 🐛 fix minor GPTMR threshold configuration issue | #834 |
| 23.02.2024 | 1.9.5.9 | 🐛 fix atomic write/clear/set accesses of clear-only CSR bits (re-fix of v1.9.5.6) | #829 |
| 23.02.2024 | 1.9.5.8 | optimize FIFO component to improve technology mapping (inferring blockRAM for "async read" configuration); 🐛 fix SLINK status flag delay | #828 |
| 23.02.2024 | 1.9.5.7 | fix FIFO synthesis issue (Vivado cannot infer block RAM nor LUT-RAM) | #827 |
| 20.02.2024 | 1.9.5.6 | 🐛 fix bug in mip.firq CSR access; mip.firq bits are now read-write - software can trigger FIRQs by writing 1 to the according CSR bit |
#821 |
| 19.02.2024 | 1.9.5.5 | SLINK: add native hardware support for AXI-stream's "tlast" signal | #815 |
| 19.02.2024 | 1.9.5.4 | Smcntrpmf ISA extension (counter privilege mode filtering) |
#814 |
| 17.02.2024 | 1.9.5.3 | #811 | |
| 16.02.2024 | 1.9.5.2 | #809 | |
| 16.02.2024 | 1.9.5.1 | ✨ add two new generics to exclude certain PMP modes from synthesis | #808 |
| 16.02.2024 | 🚀1.9.5 | New release | |
| 15.02.2024 | 1.9.4.13 | allow the DMA to issue a FENCE operation | #807 |
| 14.02.2024 | 1.9.4.12 | 🔒 close another illegal compressed instruction encoding loophole | #806 |
| 11.02.2024 | 1.9.4.11 | 🐛 fix several FPU bugs and design flaws | #794 |
| 11.02.2024 | 1.9.4.10 | minor additions to previous version (1.9.4.9): fix HPM configuration read-back | #804 |
| 10.02.2024 | 1.9.4.9 | fixing HPM configuration's null range assertions | #803 |
| 10.02.2024 | 1.9.4.8 | 🐛 fix missing fence pass-through in caches | #802 |
| 09.02.2024 | 1.9.4.7 | #800 | |
| 09.02.2024 | 1.9.4.6 | ✨ add configurable XIP cache | #799 |
| 09.02.2024 | 1.9.4.5 | 🔒 close further illegal compressed instruction encoding loopholes | #797 |
| 04.02.2024 | 1.9.4.4 | 🐛 fix minor bug: CPU instruction bus privilege signal did not remain stable during the entire request | #792 |
| 03.02.2024 | 1.9.4.3 | 🐛 fix minor bug: CPU instruction bus privilege signal was hardwired to "user-mode" | #790 |
| 01.02.2024 | 1.9.4.2 | ✨ add support for page fault exceptions (yet unused) | #786 |
| 31.01.2024 | 1.9.4.1 | fix trap priority | #784 |
| 31.01.2024 | 🚀1.9.4 | New release | |
| 31.01.2024 | 1.9.3.10 | close illegal compressed instruction decoding loophole | #783 |
| 29.01.2024 | 1.9.3.9 | 🧪 extend switchable clock domain (CPU bus switch, i-cache, d-cache) | #780 |
| 29.01.2024 | 1.9.3.8 | top entity input ports now have default values 'L' or 'h' modeling a pull-down or pull-resistor in case they are not explicitly assigned during instantiation |
#779 |
| 28.01.2024 | 1.9.3.7 | FIFO module NULL assertion fix | #778 |
| 27.01.2024 | 1.9.3.6 | improve CPU's front end (instruction fetch) increasing overall performance | #777 |
| 27.01.2024 | 1.9.3.5 | 🐛 fix typo that renders the clock gating (added in v1.9.3.4) useless: CPU sleep output stuck at zero | #776 |
| 24.01.2024 | 1.9.3.4 | ✨ add optional CPU clock gating (via new generic CLOCK_GATING_EN): shut down the CPU clock during sleep mode; neorv32_clockgate.vhd) |
#775 |
| 23.01.2024 | 1.9.3.3 | 🐛 remove compressed floating point load/store operations as they are not supported by Zfinx |
#771 |
| 20.01.2024 | 1.9.3.2 | optimize bus switch; minor RTL and comment edits | #769 |
| 14.01.2024 | 1.9.3.1 | minor rtl cleanups and optimizations | #764 |
| 11.01.2024 | 🚀1.9.3 | New release | |
| 10.01.2024 | 1.9.2.11 | minor HDL fix (introduced in v1.9.2.9) | #763 |
| 10.01.2024 | 1.9.2.10 | re-add MTIME system time output to processor top (mtime_time_o) |
#762 |
| 08.01.2024 | 1.9.2.9 | minor rtl code cleanups | #760 |
| 06.01.2024 | 1.9.2.8 | ✨ add timer-capture mode to General Purpose Timer (GPTMR); |
#759 |
| 19.12.2023 | 1.9.2.7 | minor rtl code cleanups, edits and optimization; 🔒 reset mtvec, mepc and dpc CSRs to CPU boot address (CPU_BOOT_ADDR CPU generic) |
#755 |
| 19.12.2023 | 1.9.2.6 | rework FIFO component fixing problems with inferring block RAM | #754 |
| 11.12.2023 | 1.9.2.5 | clean-up software framework | #752 |
| 09.12.2023 | 1.9.2.4 | minor rtl code cleanups | #747 |
| 09.12.2023 | 1.9.2.3 | refine behavior of CPU's sleep state & signal | #746 |
| 05.12.2023 | 1.9.2.2 | reset mstatus.mpp to "machine-mode" |
#745 |
| 02.12.2023 | 1.9.2.1 | ✨ add RISC-V Zicond ISA extension (integer conditional operations) |
#743 |
| 01.12.2023 | 🚀1.9.2 | New release | |
| 01.12.2023 | 1.9.1.9 | add menvcfg[h] CSRs |
#741 |
| 30.11.2023 | 1.9.1.8 | ✨ 🐛 upgrade RISC-V hardware trigger module (Sdtrig ISA extension) to spec. version v1.0 (fixing several minor bugs) |
#739 |
| 25.11.2023 | 1.9.1.7 | cleanup/update assertions and auto-adjusting of invalid generic configurations | #738 |
| 25.11.2023 | 1.9.1.6 | ✨ add option for "ASIC style" register file that provides a full/dedicated hardware reset | #736 |
| 23.11.2023 | 1.9.1.5 | clean-up & rework CPU branch logic | #735 |
| 21.11.2023 | 1.9.1.4 | 🐛 fix bug in handling of "misaligned instruction exception" | #734 |
| 20.11.2023 | 1.9.1.3 | 🐛 fix wiring of FPU exception flags | #733 |
| 18.11.2023 | 1.9.1.2 | add XIP clock divider to fine-tune SPI frequency | #731 |
| 18.11.2023 | 1.9.1.1 | (re-)add SPI high-speed mode, 🐛 fix bug in SPI shift register - introduced in v1.9.0.9 | #730 |
| 14.11.2023 | 🚀1.9.1 | New release | |
| 11.11.2023 | 1.9.0.9 | 🧪 add full hardware reset for all flip flops in CPU/processor | #724 |
| 09.11.2023 | 1.9.0.8 | minor rtl code cleanups | #723 |
| 04.11.2023 | 1.9.0.7 | upgrade true random number generator to neoTRNG version 3 | #721 |
| 31.10.2023 | 1.9.0.6 | update crt0's early-boot trap handler | #719 |
| 30.10.2023 | 1.9.0.5 | minor rtl cleanups and code beautification | #718 |
| 28.10.2023 | 1.9.0.4 | #716 | |
| 18.10.2023 | 1.9.0.3 | CPU_EXTENSION_RISCV_Zifencei generic - Zifencei ISA extension is now always enabled |
#709 |
| 16.10.2023 | 1.9.0.2 | minor CPU control cleanups and optimizations (branch system) | #707 |
| 13.10.2023 | 1.9.0.1 | update software framework to GCC-13.2.0 | #705 |
| 13.10.2023 | 🚀1.9.0 | New release | |
| 13.10.2023 | 1.8.9.9 | minor hardware edits and optimizations | #703 |
| 07.10.2023 | 1.8.9.8 | add "transfer done" flag to DMA | #699 |
| 04.10.2023 | 1.8.9.7 | #697 | |
| 29.09.2023 | 1.8.9.6 | optimize PMP logic (reducing area requirements) | #695 |
| 29.09.2023 | 1.8.9.5 | minor CPU optimizations and code clean-ups | #694 |
| 23.09.2023 | 1.8.9.4 | ✨ added vectored trap handling mode of mtvec for reduced latency from IRQ to ISR |
#691 |
| 22.09.2023 | 1.8.9.3 | 🔒 watchdog: add reset password and optional "strict" mode for increased safety | #692 |
| 15.09.2023 | 1.8.9.2 | #690 | |
| 11.09.2023 | 1.8.9.1 | minor rtl edits and updates | #684 |
| 09.09.2023 | 🚀1.8.9 | New release | |
| 08.09.2023 | 1.8.8.9 | removed unused mcontext and scontext CSRs (Sdtrig ISA extension); CPU optimizations (area and timing) |
#683 |
| 02.09.2023 | 1.8.8.8 | ✨ add option to implement up to 2^32 CFU-internal user-defined CSRs (via indirect CSR access) | #681 |
| 02.09.2023 | 1.8.8.7 | 🔒 (re-)add execution monitor: raise an exception if a multi-cycle ALU operation does not complete within a bound amount of time | #680 |
| 01.09.2023 | 1.8.8.6 | minor rtl edits and cleanups | #679 |
| 30.08.2023 | 1.8.8.5 | remove "branch prediction" logic - core is smaller and even faster without it | #678 |
| 25.08.2023 | 1.8.8.4 | add new generic to downgrade on-chip debugger's debug module back to spec. version 0.13 (DM_LEGACY_MODE generic) |
#677 |
| 23.08.2023 | 1.8.8.3 | 🧪 add experimental Smcntrpmf ISA extension (counter privilege mode filtering; spec. is frozen but not yet ratified); remove unused menvcfg CSRs |
#676 |
| 19.08.2023 | 1.8.8.2 | mtval CSR; add support for mtinst CSR (trap instruction) |
#674 |
| 19.08.2023 | 1.8.8.1 | 🧪 update RTE to support easy emulation of instructions; add example program to showcase how to emulate unaligned memory accesses | #673 |
| 18.08.2023 | 🚀1.8.8 | New release | |
| 17.08.2023 | 1.8.7.9 | minor rtl edits and cleanups | #672 |
| 13.08.2023 | 1.8.7.8 | mtval and mcounteren CSRs |
#671 |
| 12.08.2023 | 1.8.7.7 | remove unratified Zicond ISA extension; minor rtl code cleanups and optimizations |
#670 |
| 05.08.2023 | 1.8.7.6 | 🐛 fix bug: HPM width configurations below 32 bit fail | #665 |
| 04.08.2023 | 1.8.7.5 | #664 | |
| 29.07.2023 | 1.8.7.4 | RTL cleanup and optimizations (less synthesis warnings, less resource requirements) | #660 |
| 28.07.2023 | 1.8.7.3 | #659 | |
| 27.07.2023 | 1.8.7.2 | 🐛 make sure that IMEM/DMEM size is always a power of two | #658 |
| 27.07.2023 | 1.8.7.1 | CUSTOM_ID generic; cleanup and re-layout NEORV32_SYSINFO.SOC bits; (:bug:) fix gateway's generics (positive -> natural as these generics are allowed to be zero) |
#657 |
| 26.07.2023 | 🚀1.8.7 | New release | |
| 24.07.2023 | 1.8.6.10 | 🐛 fixing some LR/SC design flaws | #654 |
| 23.07.2023 | 1.8.6.9 | optimize bus system and customization options | #653 |
| 22.07.2023 | 1.8.6.8 | minor rtl edits | #652 |
| 21.07.2023 | 1.8.6.7 | ✨ add support for RISC-V A ISA Extension (atomic memory accesses; lr.w/sc.w only!) |
#651 |
| 18.07.2023 | 1.8.6.6 | #650 | |
| 16.07.2023 | 1.8.6.5 | #648 | |
| 15.07.2023 | 1.8.6.4 | #648 | |
| 14.07.2023 | 1.8.6.3 | #648 | |
| 14.07.2023 | 1.8.6.2 | minor rtl edits | #646 |
| 30.06.2023 | 1.8.6.1 | minor rtl edits, cleanups and optimizations | #641 |
| 27.06.2023 | 🚀1.8.6 | New release | |
| 24.06.2023 | 1.8.5.9 | 🧪 VHDL code: use entity instantiation instead of component instantiation | #637 |
| 24.06.2023 | 1.8.5.8 | optimize CPU control logic; closed further invalid instruction word detection holes | #636 |
| 23.06.2023 | 1.8.5.7 | #635 | |
| 17.06.2023 | 1.8.5.6 | ✨ add new Cyclic Redundancy Check module (CRC) | #632 |
| 03.06.2023 | 1.8.5.5 | ✨ re-add (simplified) Stream Link Interface (SLINK) | #628 |
| 03.06.2023 | 1.8.5.4 | #627 | |
| 02.06.2023 | 1.8.5.3 | 🐛 executable generation: fix address continuity between .text and .rodata segments |
#626 |
| 19.05.2023 | 1.8.5.2 | ✨ add automatic trigger mode to DMA (trigger transfer if a processor-internal peripheral issues an interrupt request) | #618 |
| 18.05.2023 | 1.8.5.1 | software can now retrieve the configured FIFO size of the TRNG | #616 |
| 18.05.2023 | 🚀1.8.5 | New release | |
| 18.05.2023 | 1.8.4.9 | remove is_simulation flag from SYSINFO; add programmable interrupt to TRNG module |
#615 |
| 12.05.2023 | 1.8.4.8 | mtval CSR now provides the address of ebreak exceptions (re-added temporarily to pass RISC-V ISA tests) |
#611 |
| 03.05.2023 | 1.8.4.7 | 🐛 fix bug in FPU (terminate FPU sub-module operations if an exception has been raised) | #609 |
| 02.05.2023 | 1.8.4.6 | make SDI FIFO access entirely synchronous; upgrade processor memory modules; update test setup wrappers | #608 |
| 30.04.2023 | 1.8.4.5 | rework processor-internal bus system | #607 |
| 27.04.2023 | 1.8.4.4 | minor hardware edits and switching activity optimizations of CPU bus unit | #605 |
| 25.04.2023 | 1.8.4.3 | 🐛 fix bug in DMA (corrupted write-back when there are bus wait cycles - e.g. when no caches are implemented) | #601 |
| 24.04.2023 | 1.8.4.2 | minor rtl edits; shorten critical path of d-cache setup | #599 |
| 22.04.2023 | 1.8.4.1 | ✨ add optional direct memory access controller (DMA) | #593 |
| 21.04.2023 | 🚀1.8.4 | New release | |
| 21.04.2023 | 1.8.3.9 | 🐛 fix timeout bug in FPU normalizer | #592 |
| 19.04.2023 | 1.8.3.8 | minor processor bus system optimizations and clean-ups | #591 |
| 15.04.2023 | 1.8.3.7 | 🐛 wfi and XIRQ bug fixes; massive RTL code cleanup and optimization of CPU control |
#586 |
| 14.04.2023 | 1.8.3.6 | [UARTs] software can now retrieve the configured RX/TX FIFO sizes from the DATA register |
#581 |
| 13.04.2023 | 1.8.3.5 | 🐛 fixed bug in FPU control logic (introduced in some earlier clean-up commit); minor code edits and optimizations | #578 |
| 07.04.2023 | 1.8.3.4 | rtl edits and cleanups | #571 |
| 05.04.2023 | 1.8.3.3 | update external interrupt controller (XIRQ) | #570 |
| 05.04.2023 | 1.8.3.2 | time CSR struggles (again) and logic optimization |
#569 |
| 01.04.2023 | 1.8.3.1 | ✨ add full NA4 and NAPOT support to the (now) RISC-V-compatible physical memory protection (PMP) |
#566 |
| 31.03.2023 | 🚀1.8.3 | New release | |
| 29.03.2023 | 1.8.2.9 | CPU_EXTENSION_RISCV_Zicsr generic - Zicsr ISA extension is always enabled; optimize bus switch; VHDL code cleanups |
#562 |
| 25.03.2023 | 1.8.2.8 | 🧪 add configurable data cache (dCACHE) | #560 |
| 24.03.2023 | 1.8.2.7 | ✨ add full support of mcounteren CSR; cleanup counter and PMP CSRs; i-cache optimization |
#559 |
| 18.03.2023 | 1.8.2.6 | add new generic JEDEC_ID (official JEDEC identifier; used for mvendorid CSR); further generics cleanups |
#557 |
| 17.03.2023 | 1.8.2.5 | add RISC-V time[h] CSRs (part of the Zicntr ISA extension) |
#556 |
| 17.03.2023 | 1.8.2.4 | re-add VHDL process names | #555 |
| 15.03.2023 | 1.8.2.3 | rtl reworks, cleanups and optimizations | #550 |
| 11.03.2023 | 1.8.2.2 | ✨ add support for RISC-V Zicond ISA extension (conditional operations) |
#546 |
| 10.03.2023 | 1.8.2.1 | rtl code edits, clean-ups and minor optimizations (improve branch prediction) | #545 |
| 10.03.2023 | 🚀1.8.2 | New release | |
| 09.03.2023 | 1.8.1.10 | #543 | |
| 08.03.2023 | 1.8.1.9 | reintegrate UART RTS/CTS hardware flow-control | #541 |
| 07.03.2023 | 1.8.1.8 | update smart LED controller NEOLED | #536 |
| 05.03.2023 | 1.8.1.7 | #533 | |
| 04.03.2023 | 1.8.1.6 | #530 | |
| 02.03.2023 | 1.8.1.5 | minor general purpose timer (GPTMR) code edits | #529 |
| 02.03.2023 | 1.8.1.4 | 🐛 fix timeout bug in FPU (conversion and add/sub instructions) | #528 |
| 25.02.2023 | 1.8.1.3 | ✨ add new processor module: Serial Data Interface (SDI) - a SPI device-class interface | #505 |
| 24.02.2023 | 1.8.1.2 | #504 | |
| 23.02.2023 | 1.8.1.1 | CFS: add another 32 interface register (now having 64 memory-mapped registers for custom usage) | #503 |
| 23.02.2023 | 🚀1.8.1 | New release | |
| 22.02.2023 | 1.8.0.10 | #502 | |
| 19.02.2023 | 1.8.0.9 | #501 | |
| 18.02.2023 | 1.8.0.8 | 🐛 fix minor bug in CPU's co-processor monitor; minor VHDL clean-ups and edits | #500 |
| 13.02.2023 | 1.8.0.7 | minor CPU optimization and fixes | #497 |
| 11.02.2023 | 1.8.0.6 | IO_GPIO_EN generic by natural IO_GPIO_NUM generic to fine-tune GPIO pin number |
#491 |
| 10.02.2023 | 1.8.0.5 | 🧪 add CPU co-processor monitor (to auto-terminate operation if a co-processor operation takes too long) | #490 |
| 10.02.2023 | 1.8.0.4 | replace CPU-internal control bus by a VHDL record (much cleaner code); minor control optimizations; add 6ht CPU co-processor slot (yet unused) |
#489 |
| 05.02.2023 | 1.8.0.3 | CPU control optimizations | #487 |
| 04.02.2023 | 1.8.0.2 | fix RISC-V-incompatible behavior of mip CSR |
#486 |
| 01.02.2023 | 1.8.0.1 | clean-up CPU's interrupt controller; fix race condition in FIRQ trigger/acknowledge | #484 |
| 25.01.2023 | 🚀1.8.0 | New release | |
| 21.01.2023 | 1.7.9.10 | update software framework; 🐛 fix bug in constructor calling in crt0 start-up code |
#478 |
| 15.01.2023 | 1.7.9.9 | mtime_i/o top entity ports; remove time[h] CSRs |
#477 |
| 14.01.2023 | 1.7.9.8 | minor CPU control edits, optimizations and fixes | #476 |
| 10.01.2023 | 1.7.9.7 | #474 | |
| 06.01.2023 | 1.7.9.6 | update neoTRNG v2 | #472 |
| 06.01.2023 | 1.7.9.5 | CPU control: logic optimization and fix minor bug in trigger module | #470 |
| 04.01.2023 | 1.7.9.4 | update on-chip debugger: 🧪 remove debug module's haltsum0 register; rework DMI to comply with RISC-V debug spec.; minor edits, updates and fixes |
#468 |
| 23.12.2022 | 1.7.9.3 | Sdext and Sdtrig ISA extension generics (replacing DEBUG); ✨ trigger-module can now also be used by machine-mode software without the on-chip debugger, add minimal example program sw/example/demo_trigger_module |
#465 |
| 23.12.2022 | 1.7.9.2 | ✨ upgrade the on-chip debugger (OCD) to spec. version 1.0; major logic and debugging response time optimizations | #463 |
| 22.12.2022 | 1.7.9.1 | remove signal initialization (in reset generator) as some FPGAs do not support FF initialization via bitstream | #464 |
| 21.12.2022 | 🚀1.7.9 | New release | |
| 21.12.2022 | 1.7.8.11 | CPU: remove explicit reset-to-don't-care; branch and CSR access check logic optimizations; close further illegal instruction encoding hole | #462 |
| 20.12.2022 | 1.7.8.10 | SOC: rework r/w access logic; split read and write accesses into two processes; removed explicit reset-to-don't-care | #461 |
| 18.12.2022 | 1.7.8.9 | mtval is no longer read-only and can now be written by machine-mode software |
#460 |
| 17.12.2022 | 1.7.8.8 | 🐛 fix incorrect value written to mepc when encountering an "instruction access fault" exception |
#458 |
| 16.12.2022 | 1.7.8.7 | 🐛 fix instruction cache block invalidation when a bus access error occurs during memory block fetch (after cache miss) | #457 |
| 16.12.2022 | 1.7.8.6 | 🧪 optimized park-loop code (on-chip debugger firmware) providing slightly faster debugging response; added explicit address generics for defining debug mode entry points | #456 |
| 13.12.2022 | 1.7.8.5 | code cleanup of FIFO module; improved instruction prefetch buffer (IPB) - IPD depth can be as small as "1" and will be adjusted automatically when enabling the C ISA extension; update hardware implementation results |
#455 |
| 09.12.2022 | 1.7.8.4 | ✨ new option to add custom R5-type (4 source registers, 1 destination register) instructions to Custom Functions Unit (CFU) | #452 |
| 08.12.2022 | 1.7.8.3 | 🐛 fix interrupt behavior when in user-mode; minor core rtl fixes; do not check registers specifiers in CFU instructions (i.e. using registers above x15 when E ISA extension is enabled) |
#450 |
| 03.12.2022 | 1.7.8.2 | ✨ new option to add custom R4-type RISC-V instructions to Custom Functions Unit (CFU); rework CFU hardware module, intrinsic library and example program | #449 |
| 01.12.2022 | 1.7.8.1 | package cleanup | #447 |
| 28.11.2022 | 🚀1.7.8 | New release | |
| 14.11.2022 | 1.7.7.9 | minor rtl edits and code optimizations | #442 |
| 05.11.2022 | 1.7.7.8 | minor rtl edits | #441 |
| 03.11.2022 | 1.7.7.7 | ✨ add fine-grained clock configuration for TWI module: add fine-grained clock configuration, add clock stretching configuration flag | #440 |
| 01.11.2022 | 1.7.7.6 | #438 | |
| 24.10.2022 | 1.7.7.5 | 🧪 remove weird Quartus latch warnings by modifying VHDL coding style | #434 |
| 19.10.2022 | 1.7.7.4 | optimize UART's RTS (hardware flow control) behavior |
#433 |
| 15.10.2022 | 1.7.7.3 | 🐛 fix bug in is_power_of_two_f VHDL function (thanks Alan!) |
#428 |
| 12.10.2022 | 1.7.7.2 | add dedicated hardware reset to all CPU counters ([m]cycle[h], [m]instret[h], [m]hpmcounter[h]); ✨ all CSRs now provide a dedicated hardware reset |
#426 |
| 09.10.2022 | 1.7.7.1 | fix Quartus synthesis issue (VHDL): make sure reset state is the first entry in a state list | #423 |
| 24.09.2022 | 🚀1.7.7 | New release | |
| 23.09.2022 | 1.7.6.10 | cleanup native data path size (remove data_width_c package constant); initial preparations to support RV64 ISA extension somewhere in the future |
#417 |
| 18.09.2022 | 1.7.6.9 | 🐛 fixed instruction decoding collision in B ISA extensions - B extension is now fully operational and verified (see neorv32-riscof)! |
#413 |
| 13.09.2022 | 1.7.6.8 | 🐛 bug fix: clearing mie's FIRQ bits did not clear the according pending FIRQs |
#411 |
| 12.09.2022 | 1.7.6.7 | minor rtl edits and cleanups | #410 |
| 10.09.2022 | 1.7.6.6 | mtval to zero on any illegal instruction exception - removes redundancies, simplifies hardware |
#409 |
| 09.09.2022 | 1.7.6.5 | minor rtl edits; add "output gate" to FIFO component | #408 |
| 08.09.2022 | 1.7.6.4 | #407 | |
| 07.09.2022 | 1.7.6.3 | minor rtl edits and cleanups | #406 |
| 03.09.2022 | 1.7.6.2 | cleanup hardware reset logic | #405 |
| 02.09.2022 | 1.7.6.1 | ✨ add new processor module: 1-Wire Interface Controller (ONEWIRE) | #402 |
| 28.08.2022 | 🚀1.7.6 | New release | |
| 27.08.2022 | 1.7.5.9 | fix minor core rtl issues that were found while experimenting with a low-level netlist of the processor | #398 |
| 26.08.2022 | 1.7.5.8 | cleanup crt0 start-up code: remove setup of mcountern and mcountinhibit CSRs |
#397 |
| 24.08.2022 | 1.7.5.7 | minor rtl cleanups | #396 |
| 20.08.2022 | 1.7.5.6 | ✨ update software framework to GCC 12.1.0 (new prebuilt toolchains available!) | #391 |
| 18.08.2022 | 1.7.5.5 | 🔒 add TRNG read data protection | #389 |
| 18.08.2022 | 1.7.5.4 | minor rtl cleanup in PWM module | #388 |
| 17.08.2022 | 1.7.5.3 | optimized CPU front-end - faster instruction fetch | #387 |
| 16.08.2022 | 1.7.5.2 | relocate TWI tri-state drivers | #386 |
| 15.08.2022 | 1.7.5.1 | change base address of BUSKEEPER | #385 |
| 15.08.2022 | 🚀1.7.5 | New release | |
| 14.08.2022 | 1.7.4.10 | cleanup of FIFO rtl component | #384 |
| 13.08.2022 | 1.7.4.9 | minor rtl cleanups and optimizations | #383 |
| 01.08.2022 | 1.7.4.8 | ✨ add configurable data FIFO to SPI module | #381 |
| 31.07.2022 | 1.7.4.7 | #377 | |
| 25.07.2022 | 1.7.4.6 | #375 | |
| 22.07.2022 | 1.7.4.5 | add CUSTOM_ID generic; update bootloader |
#374 |
| 21.07.2022 | 1.7.4.4 | 🔒 specify physical memory attributes (PMA) | #372 |
| 18.07.2022 | 1.7.4.3 | minor rtl edits and updates | #369 |
| 15.07.2022 | 1.7.4.2 | 🐛 fixed PMP configuration error when PMP_NUM_REGIONS = 0 |
#368 |
| 15.07.2022 | 1.7.4.1 | 🐛 fix permanent stall of [m]cycle[h] and [m]instret[h] counter if HPM_NUM_CNTS = 0; 🐛 fixed bug in Wishbone we signal when ASYNC_TX mode enabled; hardwire dcsr.mprven to 1 |
#367 |
| 14.07.2022 | 🚀1.7.4 | New release | |
| 14.07.2022 | 1.7.3.11 | reset all "core" CSRs to all-zero | #366 |
| 13.07.2022 | 1.7.3.10 | 🐛 reworked/fixed physical memory protection; ✨ added mstatus.MPRV flag |
#365 |
| 12.07.2022 | 1.7.3.9 | clean-up and rework bootloader; ✨ add "boot via XIP" option | #364 |
| 11.07.2022 | 1.7.3.8 | physical memory protection(PMP): locking entry i in TOR mode will now also prevent write access to pmpaddr(i-1) (RISC-V compatibility) |
#363 |
| 09.07.2022 | 1.7.3.7 | 🐛 fixed bootloader's byte order when using the flash for application storage: |
#362 |
| 08.07.2022 | 1.7.3.6 | 🧪 added burst mode option to XIP module to accelerate consecutive flash read accesses; |
#361 |
| 08.07.2022 | 1.7.3.5 | Update "raw" executable generation options of makefile and image generator | #360 |
| 05.07.2022 | 1.7.3.4 | add "infrastructure" for cached (burst) bus accesses | #359 |
| 01.07.2022 | 1.7.3.3 | minor rtl cleanups | #357 |
| 29.06.2022 | 1.7.3.2 | 🧪 add experimental core complex wrapper for integration into the LiteX SoC builder framework | #353 |
| 28.06.2022 | 1.7.3.1 | 🐛 fix bug that caused permanent CPU stall if illegal load/store instruction | #356 |
| 23.06.2022 | 🚀1.7.3 | New release two years NEORV32! 🎉 | |
| 21.06.2022 | 1.7.2.10 | ✨ add option to implement an asynchronous Wishbone TX path; add new top generic MEM_EXT_ASYNC_TX |
#352 |
| 17.06.2022 | 1.7.2.9 | minor rtl code clean-ups/optimization of CPU core and Neoled module | #351 |
| 16.06.2022 | 1.7.2.8 | #349 | |
| 11.06.2022 | 1.7.2.7 | reworked processor reset system; |
#345 |
| 10.06.2022 | 1.7.2.6 | Wishbone interface now gates all outgoing signals (= signals remain stable if there is no active Wishbone access) | #344 |
| 09.06.2022 | 1.7.2.5 | reworked TWI module fixing several interface timing issues; |
#340 |
| 06.06.2022 | 1.7.2.4 | split executable images into package and body | #338 |
| 04.06.2022 | 1.7.2.3 | 🐛 fixed bug in SPI and XIP modules: phase offset between SPI clock and SPI data | #336 |
| 03.06.2022 | 1.7.2.2 | ✨ (finally) added a dedicated hardware reset to all IO/peripheral devices | #334 |
| 02.06.2022 | 1.7.2.1 | ✨ add watchdog pause flag to stop watchdog timeout counter when CPU is in sleep mode | #331 |
| 02.06.2022 | 🚀1.7.2 | New release | |
| 01.06.2022 | 1.7.1.11 | 🐛 fixed bug in debugger's single-stepping mode (bug introduced with version 1.7.1.9) | #329 |
| 29.05.2022 | 1.7.1.10 | rework bootloader's "SPI flash presence detection"; added new option (SPI_FLASH_ADDR_BYTES) to customize the bootloader SPI flash address width (16-, 24- or 32-bit) |
#321 |
| 29.05.2022 | 1.7.1.9 | 🐛 fixed bug in CPU trap logic: collision of synchronous and asynchronous exceptions | #327 |
| 19.05.2022 | 1.7.1.8 | 🐛 fixed bug in XIP address conversion logic: sub-word read accesses (half-word, byte) returned wrong data | #320 |
| 17.05.2022 | 1.7.1.7 | ✨ add optional/configurable data FIFO to TRNG; new top generic IO_TRNG_FIFO |
#316 |
| 13.05.2022 | 1.7.1.6 | 🐛 fixed bug in BUSKEEPER timeout logic | #315 |
| 10.05.2022 | 1.7.1.5 | code clean-up and minor optimization of B extension (bit-manipulation) CPU co-processor |
#312 |
| 06.05.2022 | 1.7.1.4 | ✨ upgrade TRNG module to new neoTRNG v2 | #311 |
| 05.05.2022 | 1.7.1.3 | 🐛 bug fix in CPU counter overflow logic (cycle and instret counters); minor optimization of CPU execution unit |
#310 |
| 28.04.2022 | 1.7.1.2 | add flag to mxisa CSR to check if this is a simulation (bit 20: CSR_MXISA_IS_SIM); add flag to mxisa CSR to check if all CPU core register have a dedicated reset (bit 21: CSR_MXISA_HW_RESET) |
#309 |
| 27.04.2022 | 1.7.1.1 | A ISA extension (atomic memory accesses); removed Wishbone "lock" signal |
#308 |
| 25.04.2022 | 🚀1.7.1 | New release | |
| 23.04.2022 | 1.7.0.9 | 🐛 fixed minor bug in HPM event logic: imprecise "taken branch" (HPMCNT_EVENT_TBRANCH) event | |
| 23.04.2022 | 1.7.0.8 | ✨ add simple branch prediction (predict "always taken") to CPU front-end to reduce branch penalty (less wait cycles); #306 | |
| 22.04.2022 | 1.7.0.7 | reworked CPU's MUL/DIV unit (M-extension): less area and shorter critical path; #305 |
|
| 21.04.2022 | 1.7.0.6 | further VHDL code clean-ups and minor optimizations; #303 | |
| 19.04.2022 | 1.7.0.5 | minor clean-up and optimization of CPU's bus unit | |
| 13.04.2022 | 1.7.0.4 | improve timing of CPU's barrel shifter (FAST_SHIFT_EN = true) by moving the register stage; #301 |
|
| 12.04.2022 | 1.7.0.3 | CPU front-end is now controlled by a synchronous state machine (all outgoing signals are driven by registers), reducing critical path of memory system & reducing area costs; CPU_IPB_ENTRIES now has to be >= 2; #300 |
|
| 11.04.2022 | 1.7.0.2 | cleanup of CPU front-end (instruction fetch); cleaner code, less area costs; #299 | |
| 10.04.2022 | 1.7.0.1 | rework handling of x0 register (zero): shortens critical path and reduces area costs; #298 |
|
| 08.04.2022 | 🚀1.7.0 | New release | |
| 08.04.2022 | 1.6.9.11 | 🐛 fixed bug in interrupt setup of crt0 start-up code #297 |
|
| 08.04.2022 | 1.6.9.10 | rework compressed instruction (C ISA extension) de-compressor: 🔒 closed further illegal compressed instruction holes; code clean-ups; mtval CSR now shows the decompressed 32-bit instruction when executing an illegal compressed instruction; minor RTL code cleanups (removing legacy stuff); PR #296 |
|
| 07.04.2022 | 1.6.9.9 | AND-gate CSR read address: reduces CPU switching activity (= dynamic power consumption) and even reduces area costs; PR #295 | |
| 06.04.2022 | 1.6.9.8 | 🐛 fixed instruction decoding collision in CPU B extension; 🔒 closed further illegal instruction encoding holes; optimized illegal instruction detection logic; PR #294 |
|
| 04.04.2022 | 1.6.9.7 | major CPU logic optimization: reduced area costs and shortened critical path (higher f_max!); 🐛 fixed rare bug in RTE core (if C-extension is not implemented); 🔒 closed further illegal instruction encoding holes; PR #293 | |
| 01.04.2022 | 1.6.9.6 | rework CPU front-end: instruction issue engine; much cleaner code, slightly less HW required; PR #292 | |
| 29.03.2022 | 1.6.9.5 | minor clock generator edits: reset clock generator explicitly if not being used by any peripheral/IO device | |
| 19.03.2022 | 1.6.9.4 | 🧪 change usage of VHDL *_reduce_f functions for signals that might effect gate-level simulations; PR #290 |
|
| 19.03.2022 | 1.6.9.3 | 🐛 fixed minor bug in FPU - incorrect/missing reset (even if reset to '-') of some registers |
|
| 18.03.2022 | 1.6.9.2 | fixed minor bug in TRNG interface hand shake (that marked the same RND value as "valid" for several times); minor optimization of processor's reset generator | |
| 14.03.2022 | 1.6.9.1 | mtval CSR is set to zero for software breakpoints ([c.]ebreak instruction(s)) - this is permitted by the RISC-V machine ISA spec. v1.12; PR #289 |
|
| 09.03.2022 | 🚀1.6.9 | New release | |
| 09.03.2022 | 1.6.8.12 | CPU core: minor code clean-up | |
| 08.03.2022 | 1.6.8.11 | clean-up of CPU's privilege mode logic | |
| 07.03.2022 | 1.6.8.10 | added compressed floating-point instructions (Zfinx ISA extensions); minor optimization of compressed instruction decoding logic |
|
| 05.03.2022 | 1.6.8.9 | CPU core: minor optimizations, code clean-ups and edits; ✨ added RISC-V mstatus.TW bit to allow/disallow execution of wfi instruction in user mode; PR #285 |
|
| 02.03.2022 | 1.6.8.8 | 🐛 fixed bug in layout of CPU's pmpaddr CSRs (physical memory protection); PR #283 |
|
| 01.03.2022 | 1.6.8.7 | CPU core: minor optimizations, code clean-ups and edits | |
| 26.02.2022 | 1.6.8.6 | NAPOT mode by TOR mode and fixing several minor PMP CSR-access bugs; maximum number of PMP regions is now limited to 16 entries; 1.6.5.4) - use a single PMP entry instead; see PR #281 |
|
| 25.02.2022 | 1.6.8.5 | minor BUSMUX (bus multiplexer for CPU's instruction and data buses) and CPU control edits (pipeline front-end) | |
| 24.02.2022 | 1.6.8.4 | 🐛 fixed bug in mip CSR (introduced in version 1.6.4.6 with #236): to clear/ack a pending interrupt software needs to clear the according mip bit; see PR #280 |
|
| 24.02.2022 | 1.6.8.3 | reworked CPU's data path (use a few wide multiplexers instead of many small ones); PR #279 | |
| 23.02.2022 | 1.6.8.2 | CPU logic optimizations (less area): simplified CPU co-processor interface; minor optimization of bus unit access arbiters; optimized M extension's (mul/div co-processor) divider unit |
|
| 18.02.2022 | 1.6.8.1 | minor CPU control logic optimizations: simplified execute engine; faster execution of SYSTEM instructions (one cycle less) | |
| 17.02.2022 | 🚀1.6.8 | New release | |
| 17.02.2022 | 1.6.7.10 | hardwired dcsr.stopcount to 1: all standard counters ([m]cycle[h] and [m]instret[h], but NOT [m]time[h]!!) and all hardware performance monitor (HPM) counters are stopped when the CPU is in debug mode; PR #277 |
|
| 16.02.2022 | 1.6.7.9 | mxisa CSR replacing SYSINFO's NEORV32_SYSINFO.CPU memory-mapped register: bit-positions remain but names and the actual access mechanism (CSR vs. memory-mapped) have changed! see PR #276 |
|
| 11.02.2022 | 1.6.7.8 | 🧪 added newlib's system calls (stubs) and linker script symbols for heap memory to support dynamic memory allocation (e.g. malloc) and even standard IO functions like printf; see PR #275 |
|
| 10.02.2022 | 1.6.7.7 | 🧪 added RISC-V hardware trigger module to CPU - allows to set hardware breakpoints (via gdb's hb/hbreak command) to debug code from ROM; see PR #274; 🐛 minor bug fix in ebreak instruction's dcsr.cause value (was 0b010 but has to be 0b001) |
|
| 08.02.2022 | 1.6.7.6 | main |
|
| 07.02.2022 | 1.6.7.5 | removed default values for bi-directional top entity ports twi_sda_io and twi_scl_io |
|
| 05.02.2022 | 1.6.7.4 | added err_o signal to IMEM module; if the IMEM is implemented as true ROM any write attempt will raise a store access fault exception (with a [DEVICE_ERR] error); see PR #273 |
|
| 03.02.2022 | 1.6.7.3 | 🧪 using LTO (link-time-optimization) option for bootloader; improved bootloader user console; see PR #268 |
|
| 31.01.2022 | 1.6.7.2 | 🐛 fixed minor bug in bootloader's MTIME handling (bootloader crashed if Zicntr ISA extension not enabled), fixed minor issues in MTIME and time CSRs handling; added MTIME example program; see PR #267 |
|
| 30.01.2022 | 1.6.7.1 | ✨ added Zxcfu ISA extension for user-defined custom RISC-V instructions; see PR #264 |
|
| 28.01.2022 | 🚀1.6.7 | New release | |
| 28.01.2022 | 1.6.6.10 | 🐛 fixed bug in bit-manipulation co-processor: decoding collision between cpop and rol instructions; 🐛 fixed bug in co-processor arbitration when an illegal instruction is detected; added four additional (yet unused) CPU co-processor slots; PR #262 |
|
| 27.01.2022 | 1.6.6.9 | reworked CFS "user" logic; added CFS demo program; see PR #261 | |
| 27.01.2022 | 1.6.6.8 | ✨ added support for RISC-V bit-manipulation (B) carry-less multiplication instructions Zbc sub-extension; added test cases and intrinsics; the NEORV32 bit-manipulation ISA extension (B) now fully complies to the RISC-V specs. v0.93; see PR #260 |
|
| 26.01.2022 | 1.6.6.7 | ✨ added support for RISC-V bit-manipulation (B) single-bit instructions Zbs sub-extension; added test cases and intrinsics; see PR #259 |
|
| 26.01.2022 | 1.6.6.6 | minor logic optimizations in CPU control unit | |
| 25.01.2022 | 1.6.6.5 | 🔒 on-chip debugger: the memory-mapped registers of the debug module (DM) are only accessible/visible when the CPU is actually in debug mode; any access outside of debug mode will now raise a bus exception | |
| 22.01.2022 | 1.6.6.4 | minor logic optimizations in CPU control unit, minor improvement of critical path | |
| 21.01.2022 | 1.6.6.3 | reworked CPU's instruction issue engine (area optimization: ~100 LUTs less on an Intel Cyclone IV), PR #256; minor CPU control unit code clean-ups and logic optimizations | |
| 18.01.2022 | 1.6.6.2 | setups folder to new neorv32-setups repository, PR #254 |
|
| 18.01.2022 | 1.6.6.1 | minor MTIME VHDL code clean-up; minor logic optimization of CPU's bus unit | |
| 17.01.2022 | 🚀1.6.6 | New release | |
| 14.01.2022 | 1.6.5.9 | GPIO module: write accesses to the GPIO module's "input" registers will now raise a bus exception; PR #255 | |
| 11.01.2022 | 1.6.5.8 | minor rtl code clean-ups and edits in rtl/core; any write access to the SYSINFO module will now show up as a BUSKEEPER's "DEVICE_ERR" |
|
| 08.01.2022 | 1.6.5.7 | 🐛 fixed bug in BUSKEEPER's error type logic (introduced in version 1.6.5.4); removed "unexpected ERR/ACK" error codes; PR #253 |
|
| 07.01.2022 | 1.6.5.6 | ✨ XIP & SPI: added high-speed SPI mode (SPI clocking at half of the processor clock), see PR #251 | |
| 06.01.2022 | 1.6.5.5 | ||
| 04.01.2022 | 1.6.5.4 | BUSKEEPER can now optionally check for NULL address accesses (address 0x00000000), see PR #247 |
|
| 02.01.2022 | 1.6.5.3 | ✨ added Execute In Place (XIP) module allowing code to be directly executed from an external SPI flash, see PR #244 | |
| 02.01.2022 | 1.6.5.2 | 🐛 fixed minor bug in CPU's instruction fetch unit (only issue new instruction fetch request when the previous one has been completed) | |
| 16.12.2021 | 🚀1.6.5 | New release | |
| 15.12.2021 | 1.6.4.10 | minor logic optimization of CPU's pipeline front-end (instruction fetch and instruction issue) | |
| 14.12.2021 | 1.6.4.9 | optimized CPU's multiplication/division co-processor: divisions are 1 cycle faster, fast-multiplications (when using DSPs) are 1 cycle faster, slightly less resource utilization, see PR #240 | |
| 11.12.2021 | 1.6.4.8 | watchdog: added new DBEN and HALF flags to control register (enable WDT during debugging, check timeout counter level), see PR #239 | |
| 10.12.2021 | 1.6.4.7 | optimized CPU's multiplication/division co-processor: all mul/div operations are 1 cycle faster + slightly less resource utilization, see PR #238 | |
| 08.12.2021 | 1.6.4.6 | ||
| 03.12.2021 | 1.6.4.5 | added SYSINFO_SOC_IS_SIM flag to SYSINFO to check if processor is being simulated (not guaranteed, depends on the toolchain's 'pragma' support), see PR #231 | |
| 03.12.2021 | 1.6.4.4 | 🐛 fixed bug in Wishbone bus interface: timeout configurations (via MEM_EXT_TIMEOUT generic) that are a power of two (e.g. 256) caused immediate timeouts; timeout counter was one bit short; same problem for processor-internal bus monitor (BUSKEEPER); see PR #230 |
|
| 02.12.2021 | 1.6.4.3 | sw/lib/include/neorv32_legacy.h and neorv32_uart_* functions) |
|
| 28.11.2021 | 1.6.4.2 | 🐛 fixed bug in UART[0/1] overrun flag (was not set/cleared correctly); fixed bug in UART0 enable function neorv32_uart0_enable() |
|
| 28.11.2021 | 1.6.4.1 | (:warning:) bootloader now stores executable in little-endian byte-order to SPI flash | |
| 26.11.2021 | 🚀1.6.4 | New release | |
| 22.11.2021 | 1.6.3.11 | on-chip debugger: reworked JTAG signal input/output synchronization logic (see PR #216) | |
| 22.11.2021 | 1.6.3.10 | reworked TRNG (less hardware requirements, improved quality), see PR #212 and stnolting/neoTRNG | |
| 21.11.2021 | 1.6.3.9 | minor rtl edits: configuring an IMEM or DMEM size (MEM_INT_IMEM_SIZE / MEM_INT_DMEM_SIZE generic) of 0 will now exclude the according memory from synthesis (and also clears the according NEORV32_SYSINFO.SOC flags) |
|
| 18.11.2021 | 1.6.3.8 | TWI: removed TWI_CTRL_CKSTEN flag (enable clock stretching) from control registers, clock-stretching is now always enabled | |
| 14.11.2021 | 1.6.3.7 | major control unit and ALU logic optimizations, reduced hardware footprint; 🔒 closed further illegal instruction encoding holes (system environment instructions, ALU and ALU-immediate instructions, FENCE instructions); PR #204 | |
| 10.11.2021 | 1.6.3.6 | optimized BUSKEEPER: removed redundant logic - bus keeper now also shows an external interface access timeout (if implemented) as "timeout error"; removed BUSKEEPER_ERR_SRC status flag; err_o (fault access operation) to the custom functions subsystem (CFS) |
|
| 09.11.2021 | 1.6.3.5 | ||
| 06.11.2021 | 1.6.3.4 | 🐛 fixed bug in WISHBONE interface: pipelined Wishbone mode did not clear STB after first transfer cycle | |
| 05.11.2021 | 1.6.3.3 | 🐛 fixed bug in general purpose timer GPTMR - clock prescaler had no effect, the timer was always counting at full processor clock speed; minor watchdog (WDT) code edits | |
| 04.11.2021 | 1.6.3.2 | added optional alternative IMEM and DMEM architecture-only design files (in rtl/core/mem); these are not device-specific ("cyclone 2") as they do not use any FPGA-specific primitives or macros - just a different HDL style for describing memories is used (see PR #192 and Issue #197) |
|
| 03.11.2021 | 1.6.3.1 | ✨ added new peripheral module - General Purpose 32-bit Timer GPTMR (see PR #195) |
|
| 02.11.2021 | 🚀1.6.3 | New release | |
| 01.11.2021 | 1.6.2.13 | added new top generics to explicitly control implementation of Zicntr (CPU base counters) and Zihpm (hardware performance monitors, see PR #192 |
|
| 30.10.2021 | 1.6.2.12 | ✨ 🔒 added memory-mapped register to BUSKEEPER module - software can now retrieve the actual cause of an instruction / data-load / data-store bus access fault exception (access timeout or device error); see PR #191 | |
| 28.10.2021 | 1.6.2.11 | ✨ added Zba bit-manipulation sub-extension; B sub-extensions: removed CPU_EXTENSION_RISCV_Zbb generic and according SYSINFO flag, added new CPU_EXTENSION_RISCV_B generic (to implement bit-manipulation B ISA extension with all currently supported subsets), see PR #190 |
|
| 27.10.2021 | 1.6.2.10 | 🐛 CPU control unit: fixed imprecise illegal instruction exceptions - MEPC and MTAVL did not reflect the correct exception-causing data for illegal ALU-class (non-multi-cycle like SUB) operations; optimized critical path of exception logic (illegal compressed instruction detection) |
|
| 27.10.2021 | 1.6.2.9 | CPU control unit: minor logic optimization - fence.i instruction needs 1 cycle less to execute, reduced HW footprint of control engine, shortened CPU's critical path (PC update logic) |
|
| 26.10.2021 | 1.6.2.8 | 🐛 bootloader: fixed bug in stack pointer initialization (introduced in version 1.6.2.7); minor SPI unit VHDL code clean-up |
|
| 24.10.2021 | 1.6.2.7 | minor control unit fixes (add logic to check both half-words of a unaligned 32-bit instruction did not cause any bus exceptions); minor ALU logic optimization; optimized ctr0.S: bootloader stack pointer initialization (is now done based on the actual physical memory configuration) - bootloader is now even more independent of the actual platform configuration |
|
| 24.10.2021 | 1.6.2.6 | 🐛 fixed HW bug introduced in version 1.6.2.4 (write access arbitration in BUSMUX) |
|
| 21.10.2021 | 1.6.2.5 | minor code edits; improved stability of UART receiver's start-bit detection (more "spike"-resistant) | |
| 21.10.2021 | 1.6.2.4 | minor VHDL code fixes, clean-ups, optimizations and comment typo fixes (:lipstick:) | |
| 20.10.2021 | 1.6.2.3 | SPI: minor VHDL code optimization and clean-up; NOTE: all serial interfaces (SPI, TWI, UARTs) allow to terminate a running transmission by clearing the enable flag in the module's control register | |
| 18.10.2021 | 1.6.2.2 | 🐛 *_reduce_f VHDL functions did not work for single-bit operands (see PR #186) |
|
| 18.10.2021 | 1.6.2.1 | ✨ SPI: added option to configure clock polarity - the SPI module now supports all standard clock modes (0,1,2,3) (see PR #185); logic optimization of SPI module | |
| 17.10.2021 | 🚀1.6.2 | New release | |
| 17.10.2021 | 1.6.1.13 | MARCH and MABI variables - the -march and -mabi flags are no longer required/allowed (example: overriding makefile's default MARCH is now done using make MARCH=rv32imac ...) (see PR #184) |
|
| 15.10.2021 | 1.6.1.12 | sleep input (indicating CPU is in sleep mode); minor CPU control logic optimization |
|
| 15.10.2021 | 1.6.1.11 | ✨ UARTs: added optional configurable RX and TX FIFOs, added fine-grained RX/TX IRQ configuration options (see PR #183) | |
| 14.10.2021 | 1.6.1.10 | ✨ SLINK: added fine-grained, per-link interrupt configuration (see PR #182) | |
| 13.10.2021 | 1.6.1.9 | ✨ NEOLED: added new control register bit NEOLED_CTRL_IRQ_CONF to configure IRQ condition: 0 = IRQ if FIFO is less than half-full, 1 = IRQ if FIFO is empty; ℹ️ IRQ behavior is fully backwards compatible if NEOLED_CTRL_IRQ_CONF is ignored (kept zero) |
|
| 12.10.2021 | 1.6.1.8 | added dedicated half_o signal to FIFO component (FIFO at least half-full), simplifies half-full test logic in FIFO-utilizing modules (area footprint and critical path); minor logic/hardware optimization of NEOLED module |
|
| 09.10.2021 | 1.6.1.7 | ||
| 06.10.2021 | 1.6.1.6 | 🐛 fixed bugs in signal assignments and processor configuration of setups/radiant/UPduino_v3 setup; minor CPU HPM counter fix (architecture condition for "multi-cycle ALU wait cycle" HPM event) |
|
| 05.10.2021 | 1.6.1.5 | ✨ 🔒 the CPU now ensures that all illegal instructions do not commit any potential architecture state changes (like writing registers or triggering memory accesses); CPU logic optimization (smaller footprint) | |
| 04.10.2021 | 1.6.1.4 | moved CPU's comparator logic from register file unit to ALU unit (to allow easier replacement of register file design unit by technology-optimized one) | |
| 03.10.2021 | 1.6.1.3 | 🐛 fixed UART signal connection in rtl/system_integration wrappers |
|
| 01.10.2021 | 1.6.1.2 | mstatus.TW (timeout wait) bit, wfi instruction is now always allowed to be executed in less-privileged modes; minor CPU control unit logic optimizations |
|
| 01.10.2021 | 1.6.1.1 | on-chip-debugger: wfi instruction acts as a simple nop when in debug mode or during single-stepping |
|
| 28.09.2021 | 🚀1.6.1 | New release | |
| 28.09.2021 | 1.6.0.13 | 🐛 fixed elementary bug in MTIME comparator logic (interrupt condition mtime >= mtimecmp was not always evaluated correctly) |
|
| 28.09.2021 | 1.6.0.12 | fixed CPU's IRQ prioritization: (re-)enter debug mode interrupts have to be evaluated before all other interrupts | |
| 27.09.2021 | 1.6.0.11 | Zifencei extension is required for the on-chip debugger; executing fence.i without having the Zifencei extension enabled will now cause an illegal instruction exception |
|
| 22.09.2021 | 1.6.0.10 | reworked CPU/software handshake of external interrupt controller XIRQ to avoid "external IRQ -> CPU IRQ" race conditions |
|
| 22.09.2021 | 1.6.0.9 | if CPU_CNT_WIDTH generic (actual width of [m]cycle and [m]instret counters) is less than 64 the remaining bits are now just hardwired to zero ignoring any write access instead of causing an exception; minor CPU hardware optimizations |
|
| 22.09.2021 | 1.6.0.8 | 🐛 fixed bug introduced in previous version: misaligned instruction address - PC and all instruction address-related registers need to have bit 0 hardwired to zero, misaligned instructions can only appear if NOT using C ISA extension |
|
| 21.09.2021 | 1.6.0.7 | NMI, top signal nm_irq_i); reworked CPU trap prioritization (sync before async); RISC-V interrupts (MTI, MSI, MEI) are now high-level-triggered and require to stay asserted until they are explicitly acknowledged; fixed minor bug in misaligned instruction check logic (PC(0) = '1' will always cause a misalignment exception); updated trap/interrupt-related documentation |
|
| 20.09.2021 | 1.6.0.6 | the NEORV32's misa, mip and mtval CSRs are read-only; however, write accesses to these CSRs do not raise an illegal instruction exception (anymore) to be compatible to the RISC-V specs. |
|
| 19.09.2021 | 1.6.0.5 | added menvcfg[h] CSRs (only available if U ISA extension is enabled; not used yet - hardwired to zero, but required by RISC-V spec.) |
|
| 18.09.2021 | 1.6.0.4 | struct-based access concept (IO module = struct, interface registers = members of struct) instead of #define single-pointers (inspired by https://blog.feabhas.com/2019/01/peripheral-register-access-using-c-structs-part-1/), format: NEORV32_<module_name>.<register_name>; renamed all control registers and bits from *CT* to *CTRL*; added sw/lib/include/neorv32_legacy.h compatibility layer (maps deprecated "defines" to according struct registers, provides old control register/bit names, do not use for new designs!) |
|
| 16.09.2021 | 1.6.0.3 | 🐛 fixed another missing IRQ signal connection (NMI) in system_integration wrappers |
|
| 15.09.2021 | 1.6.0.2 | rtl/core/neorv32_*mem.entity.vhd) and default architecture-only (rtl/core/mem/neorv32_*mem.default.vhd); allows easy replacement by optimized platform-specific architectures |
|
| 13.09.2021 | 1.6.0.1 | 🐛 fixed missing IRQ signal assignments (MSW and XIRQ) in AXI4-lite top wrapper | |
| 11.09.2021 | 🚀1.6.0 | New release | |
| 11.09.2021 | 1.5.9.9 | removed mstatus.SD flag (is always 0 for Zfinx extension as the current state is already defined entirely by the x register file); tied mstatus.fs as it must not affect trapping of Zfinx instructions (according to RISC-V specs.) |
|
| 09.09.2021 | 1.5.9.8 | added flags to SYSINFO module to determine configuration of FAST_MUL_EN and FAST_SHIFT_EN generics by software |
|
| 09.09.2021 | 1.5.9.7 | FAST_SHIFT_EN option will now also implement full-parallel computation logic (like barrel shifters) for all Zbb shift-related instructions (population count, count leading/trailing zeros, circular shifts) |
|
| 08.09.2021 | 1.5.9.6 | ✨ added support for RISC-V Zbb CPU extension (basic bit-manipulation operations), enabled via new top generic CPU_EXTENSION_RISCV_Zbb; added example software project providing a Zbb "intrinsic" library |
|
| 08.09.2021 | 1.5.9.5 | 🐛 fixed missing flash_sdi_i in Radiant-related example setups and processor wrappers |
|
| 19.08.2021 | 1.5.9.4 | mzext CPU CSR, moved all information flags to new SYSINFO_CPU register in the system information memory module (SYSINFO) |
|
| 19.08.2021 | 1.5.9.3 | USER_CODE generic |
|
| 18.08.2021 | 1.5.9.2 | fixed Zifencei test of riscv-arch-test port |
|
| 16.08.2021 | 1.5.9.2 | minor CPU control logic optimizations | |
| 15.08.2021 | 1.5.9.1 | 🐛 fixed bug in mret instruction that caused an exception if user mode was not implemented (bug caused by modifications in v1.5.8.8) |
|
| 14.08.2021 | 1.5.9.0 | Added new designated test setups: rtl/test_setups, 📚 UG: General Hardware Setup |
|
| 13.08.2021 | 🚀1.5.9 | New release | |
| 08.08.2021 | 1.5.8.9 | reworked CPU register file logic: any write access to x0 will be masked to actually write zero - no special treatment by the CPU control unit required anymore; slightly less hardware resources required; first instruction after hardware reset should write x0 (any value; implemented in start-up code crt0.S) |
|
| 07.08.2021 | 1.5.8.8 | 🐛 fixed bug in execution (trapping) of xRET instructions: dret (return from debug-mode handler) has to raise an illegal instruction exception if executed outside of debug-mode, mret (return from machine-mode handler) has to raise an illegal instruction exception if executed in lower-privileged modes (lower than machine-mode) |
|
| 05.08.2021 | 1.5.8.7 | ✨ added mstatus.FS and mstatus.SD CSR bits: control the state of the FPU (Zfinx) extension; supported states for mstatus.FS: 00 = off, 11 = dirty; writing other states will always set dirty state; note that all FPU instructions including FPU CSR access instructions will raise an illegal instruction exception if mstatus.FS = off |
|
| 03.08.2021 | 1.5.8.6 | 🐛 fixed bug in linker script #134: .rodata.* "sub"-sections were missing, caused wrong linking of implicit constants (like strings); added mconfigptr CSR (RISC-V priv. ISA spec. v1.12-draft ;read-only): holds a pointer to a platform/system configuration structure - not actually used yet |
|
| 30.07.2021 | 1.5.8.5 | fixed minor bug in top entity / AXI4 wrapper (Vivado "issue": generic defaults need a fixed-size initialization value) #113 | |
| 26.07.2021 | 1.5.8.4 | 🐛 fixed major bug in CPU interrupt system: interrupts during memory accesses (load/store instruction) terminated those memory accesses violating the crucial "instruction atomicity" concept: traps (interrupts and exceptions) must only intervene between instructions | |
| 25.07.2021 | 1.5.8.3 | ✨ added mstauts.TW CSR flag (when set executing wfi instruction outside of machine-mode will raise an illegal instruction exception); flag is hardwired to zero if user mode is not implemented |
|
| 25.07.2021 | 1.5.8.2 | 🐛 fixed bug in E ISA extension: extension could not be enabled due to missing generic propagation; clean-up of generic defaults: only the processor top entity provides defaults for the configuration generics |
|
| 24.07.2021 | 1.5.8.1 | machine-level interrupts (top entity signals; "external" mext_irq_i, "software" msw_irq_i, "mtime" mtime_irq_i and "non-maskable" nm_irq_i) now trigger on rising edges; exposed advanced external bus interface configuration options as new top entity generics (moved from package constants): MEM_EXT_PIPE_MODE, MEM_EXT_BIG_ENDIAN, MEM_EXT_ASYNC_RX |
|
| 22.07.2021 | 🚀1.5.8 | New release | |
| 22.07.2021 | 1.5.7.16 | (re-)added mstatush CSR (all bits are hardwired to zero: writes are ignored, reads will always return zero) - CSR address is assigned to comply with RISC-V priv. arch. spec. 1.12 |
|
| 21.07.2021 | 1.5.7.15 | 🐛 fixed minor bug in SLINK module (signals were missing in sensitivity lists); IO_NEOLED_TX_FIFO to configure NEOLED FIFO depth |
|
| 18.07.2021 | 1.5.7.14 | exposed new generic CPU_IPB_ENTRIES to configure size of CPU instruction prefetch buffer |
|
| 18.07.2021 | 1.5.7.13 | clean-up of processor top entity: using more sophisticated default values for all input signals and generics (all generics are "off" by default; input signals use L for control lines and U for data lines by default) |
|
| 14.07.2021 | 1.5.7.12 | reworked SLINK interrupt concept (now using FIFO fill level "half-full" as interrupt condition, see #122); added fill level output to processor FIFO component | |
| 09.07.2021 | 1.5.7.11 | 🐛 fixed minor bug in FIFO component (mapping might fail if FIFO_DEPTH = 1); fixed broken sw/example/demo_freeRTOS makefile (all freeRTOS includes were missing) |
|
| 03.07.2021 | 1.5.7.10 | ✨ added new component: External Interrupt Controller (XIRQ): up to 32 external interrupt channels xirq_i (via XIRQ_NUM_CH generic), configurable trigger (via XIRQ_TRIGGER_TYPE and XIRQ_TRIGGER_POLARITY generics), prioritized or non-prioritized servicing |
|
| 02.07.2021 | 1.5.7.9 | relocated base addresses of watchdog timer (WDT) and true-random number generator (TRNG); removed CPU's firq_ack_o signal (was not used at all) |
|
| 30.06.2021 | 1.5.7.8 | ||
| 29.06.2021 | 1.5.7.7 | ✨ added new processor module stream link interface (SLINK): up to 8 individual RX and TX stream links, compatible to AXI4-Stream base protocol; added software driver files; added documentation | |
| 27.06.2021 | 1.5.7.6 | 🐛 fixed bug in CFS (custom functions subsystem) address map layout | |
| 27.06.2021 | 1.5.7.5 | neorv32_nco.vhd) module as it appears to be an over-engineered clock-generator without many use cases (if you really need this module, you can wrap it within the custom functions subsystem CFS) |
|
| 27.06.2021 | 1.5.7.4 | soc_firq_i: the FIRQs are reserved for processor-internal usage only, use the mext_irq_i RISC-V external interrupt signal for all external interrupt applications (via dedicated interrupt controller), a follow-up version of the project will introduce a customizable external interrupt controller; sourced-out FIFOs into new HDL component neorv32_fifo.vhd |
|
| 26.06.2021 | 1.5.7.3 | edit of v1.5.7.2: RISC-V spec claims to leave destination registers of trapping load operation unchanged (do not set to zero); minor CPU control logic optimizations; ✨ reworked bootloader to provide several new configuration and customization options | |
| 25.06.2021 | 1.5.7.2 | optimized instruction execution FSM: less hardware utilization, 🔒 now ensures to write ZERO to destination register if there is an exception during a load operation; made default bootloader even more HW configuration independent (GPIO, SPI and MTIME are optional; UART is optional but highly recommended); | |
| 24.06.2021 | 1.5.7.1 | ✨ added RISC-V Zmmul ISA extension (via CPU_EXTENSION_RISCV_Zmmul generic; default = false): implements only the integer multiplication instructions sub-set of the M extension; for size-constrained setups, requires ~50% less hardware resources than the M extension |
|
| 23.06.2021 | 🚀1.5.7 | New release one year NEORV32! 🎉 | |
| 21.06.2021 | 1.5.6.14 | 🐛 fixed bug in debugger "park loop": fence.i instruction was missing before executing the DM's program buffer - this caused execution of outdated instructions from the program buffer if the instruction cache is implemented |
|
| 21.06.2021 | 1.5.6.13 | removed TINY_SHIFT_EN generic; clean-up of CPU co-processor system: removed "dummy co-processor" for CSR read access, moved CPU shifter core into new co-processor; simplified default (bit-serial) shifter logic (single bit-shifts only) and multi-cycl instructions decode logic |
|
| 18.06.2021 | 1.5.6.12 | clean-up of CPU co-processor system (removed unused co-processor slots 4,5,6,7) | |
| 15.06.2021 | 1.5.6.11 | made bootloader more configuration-independent: bootloader now only uses the first 512 bytes of internal/external DMEM for runtime data - hence, the DMEM size is not further relevant as long as it greater than or equal to 512 bytes | |
| 14.06.2021 | 1.5.6.10 | ✨ physical size of bootloader ROM (BOOTROM) is automatically determined during synthesis based on the size of the initialization image, max physical size is 32kB; simplified BOOTROM access check logic; added size check when using IMEM as ROM (check if application image fits); simplified linker script: logical instruction address space 2GB now, no need to adapt this to hardware configuration, hardware checks if application fits into physical memory size (which configured via generics) | |
| 13.06.2021 | 1.5.6.9 | MEM_INT_IMEM_ROM and BOOTLOADER_EN generics, replaced by single INT_BOOTLOADER_EN generic (type boolean): true = implement processor-internal (default) bootloader, implement processor-internal IMEM (if implemented) as RAM; false = boot from processor-internal IMEM implemented (if enabled) as pre-intialized ROM; reworked IMEM, DMEM and BOOTROM memory architecture; reworked image generator and generated application image files (now using unconstrained array as init images + unified array/memory types) |
|
| 12.06.2021 | 1.5.6.8 | 🐛 fixed bug in instruction cache (cache controller might have missed resync/"clear-and-reload" requests from fence.i instructions); minor project/repo clean-ups |
|
| 08.06.2021 | 1.5.6.7 | clean-up of Wishbone interface module (dead code removal); added new package constant wb_rx_buffer_c to configure SYNC (default) or ASYNC Wishbone RX path (allows trade-off between performance/latency and timing closure) |
|
| 06.06.2021 | 1.5.6.6 | 🐛 fixed bug in PWM base address configuration; hpmcounter3[h]:hpmcounter3[h] CSRs, hardwired according mcounteren bits to zero: HPM can only be used in machine mode; reworded 64-bit counters (cycle, instret, hpmcounter + mtime) overflow logic: now using dedicated CARRY chain instead of overflow detector (can improve timing); |
|
| 05.06.2021 | 1.5.6.5 | removed debug mode's stepie flag (used to allow interrupts during single-stepping) as the debugger can emulate interrupts |
|
| 04.06.2021 | 1.5.6.4 | IO_PWM_EN generic, replaced by IO_PWM_NUM_CH generic - PWM controller now supports implementation of up to 60 channels via IO_PWM_NUM_CH (IO_PWM_NUM_CH = 0 will omit the PWM controller); 🐛 fixed minor bug in minstreth counter logic |
|
| 04.06.2021 | 1.5.6.3 | ||
| 03.06.2021 | 1.5.6.2 | B ISA extension (bit manipulation) has been (temporarily) removed from the project. See B ISA Extension project board. |
|
| 03.06.2021 | 1.5.6.1 | CPU/HPM counter size configuration (CPU_CNT_WIDTH and HPM_CNT_WIDTH generics) can now be 0-bit (no counters implemented at all) to 64-bit (full-scale / RISC-V standard) wide |
|
| 01.06.2021 | 🚀1.5.6.0 | New release | |
| 01.06.2021 | 1.5.5.13 | sw/image_gen) and bootloader to generate/use little-endian executables; external memory interface is little-endian by default; removed mstatus.ube bit (reads as zero now); removed mstatush CSR |
|
| 31.05.2021 | 1.5.5.12 | mret instruction now clears mstatus.mpp (according to new RISC-V privileged specs.) |
|
| 31.05.2021 | 1.5.5.11 | mtval CSR is now read-only; a write access will raise an illegal instruction exception |
|
| 30.05.2021 | 1.5.5.10 | 🐛 fixed bug in processor's reset system (system reset stuck at 0 if on-chip debugger not implemented); reworked processor's reset generator system; VHDL code clean-up; reworked SoC's bus infrastructure (now using array of records for module bus response) |
|
| 28.05.2021 | 1.5.5.9 | integrated DBMEM (debug memory) component into DM (debug module); removing now-obsolete neorv32_debug_dbmem.vhd component |
|
| 22.05.2021 | 1.5.5.8 | ✨ on-chip debugger (OCD): added debug module (DM) component; OCD is operational now (but still experimental) |
|
| 22.05.2021 | 1.5.5.7 | 🐛 fixed bug in internal memory monitoring: if accessing an unused address which is not re-directed to the external bus interface (because WISHBONE module is disabled) caused the CPU to stall since that bus access was not correctly monitored and aborted by the BUS_KEEPER | |
| 21.05.2021 | 1.5.5.6 | on-chip debugger: added debug transport module (DTM) component |
|
| 20.05.2021 | 1.5.5.5 | added system time output mtime_o (64-bit) driven by processor-internal MTIME unit (idea #29) |
|
| 20.05.2021 | 1.5.5.4 | on-chip debugger: added debug memory (DBMEM) component |
|
| 20.05.2021 | 1.5.5.3 | added flag (SYSINFO.FEATURES) to allow software to discover if on-chip debugger is implemented (SYSINFO_FEATURES_OCD); added documentation https://stnolting.github.io/neorv32/#_on_chip_debugger_ocd |
|
| 19.05.2021 | 1.5.5.2 | ✨ added RISC-V CPU Debug Mode, compatible to RISC-V debug spec; new CSRs: dcsr, dpc, dscratch; new instructions: dret; fence.i will not longer trap if executed but not implemented (CPU_EXTENSION_RISCV_Zifencei = false) |
|
| 13.05.2021 | 1.5.5.1 | added UPduino_v3 example setup; renamed signal in watchdog module (rtl/core/neorv32_wdt.vhd) - collision with reserved keyword in vhdl-2008 (fixing issue #24) |
|
| 10.05.2021 | 🚀1.5.5.0 | New release | |
| 10.05.2021 | 1.5.4.12 | mip CSR is now read-only (pending IRQs can be cleared by disabling (and re-enabling) the according mie bit), writing to mip will raise an illegal instruction exception; ✨ added non-maskable interrupt (NMI), top entity port nm_irq_i; added new NMI to NEORV32 runtime environment |
|
| 09.05.2021 | 1.5.4.11 | added new flags to mzext CSR: CSR_MZEXT_PMP (set if at least 1 PMP region is implemented at all), CSR_MZEXT_HPM (set if at least 1 HPM counter is implemented) |
|
| 03.05.2021 | 1.5.4.10 | minor code clean-ups; moved FIRQ synchronization registers to top, removed sync FFs for processor-internal sources; | |
| 30.04.2021 | 1.5.4.9 | moved definitions of IO area from crt0.S to linker script; reworked CPU's CSR access system - highly reducing area overhead (removing decoding logic of not implemented CSRs by heavily using VHDL's NULL statement in case constructs) |
|
| 29.04.2021 | 1.5.4.8 | minor edits in CPU instruction fetch engine; reduced processor-internal bus timeout (max_proc_int_response_time_c) to 15 cycles; added flag to SYSINGO module (SYSINFO_FEATURES_HW_RESET) to check if a dedicated hardware reset of all core register is implemented (via package's dedicated_reset_c constant) |
|
| 28.04.2021 | 1.5.4.7 | 🐛 fixed bug in instruction cache (iCACHE) when using two sets - ICACHE_ASSOCIATIVITY = 2: cache was corrupting the non-active set |
|
| 26.04.2021 | 1.5.4.6 | optimized CPU's instruction fetch unit: less overhead for branches, reduced unit's hardware complexity | |
| 25.04.2021 | 1.5.4.5 | ✨ cancel signals from processor-internal bus system; removed CPU's internal bus access timeout counter; added new top generic: MEM_EXT_TIMEOUT - type natural, default = 255; used to configure optional auto-timeout of Wishbone interface (if an external device is not responding within MEM_EXT_TIMEOUT clock cycles); set to zero to disable auto-timeout (required to comply with AXI4-Lite specs. when using the top's AXI wrapper) |
|
| 25.04.2021 | 1.5.4.3 | ✨ converted NEORV32.pdf data sheet to asciidoc using asciidoctor; added data sheet sources to docs/src_adoc |
|
| 21.04.2021 | 1.5.4.3 | wb_tag_i signal, pruned one bit of top's wb_tag_o signal (atomic access), added top's wb_lock_o signal; updated sections in NEORV32.pdf regarding atomic memory accesses |
|
| 19.04.2021 | 1.5.4.1 | added register stage to MTIME.time write access to improve timing closure |
|
| 17.04.2021 | 🚀1.5.4.0 | New release | |
| 16.04.2021 | 1.5.3.13 | TINY_SHIFT_EN (type = boolean, default = false) to configure a tiny single-bit (iterative) shifter for CPU ALU shift operations (for highly area-constrained setups) |
|
| 16.04.2021 | 1.5.3.12 | ✨ reworked reset system of the complete CPU: by default most registers (= "uncritical registers") do not provide an initialization via hardware reset; a defined reset value can be enabled by setting a constant from the main VHDL package (rtl/core/neorv32_package.vhd): constant dedicated_reset_c : boolean := false; (set true to enable CPU-wide dedicated register reset); see new section "2.11. CPU Hardware Reset" of NEORV32.pdf for more information |
|
| 14.04.2021 | 1.5.3.11 | minor rtl edits to allow synthesis using ghdl-yosys-plugin (:construction: work in progress :construction:) |
|
| 13.04.2021 | 1.5.3.10 | 🐛 fixed bug when configuring HPM_CNT_WIDTH less than 32; CPU_CNT_WIDTH to configure total size of CPU's cycle and instret CSRs (default = 64-bit); added Zxnocnt (no counters) and Zxscnt (small counters) flags to mzexr CSR to check if CPU_CNT_WIDTH is zero or less than 64, respectively; 🐛 fixed bug in crt0.S start-up code: stack pointer has to be initialized before an exception can occur; updated cpu_test example program |
|
| 11.04.2021 | 1.5.3.9 | ||
| 09.04.2021 | 1.5.3.8 | optimized CPU control: register write back during multi-cycle ALU operation only when result is really available (reducing switching activity; avoids possible source operand corruption); optimized M extension's co-processor: multiplications and divisions are 2 cycles faster |
|
| 08.04.2021 | 1.5.3.7 | 🐛 fixed bug in HPM event configuration via mhpmevent* CSRs - there was a CSR address decoding overlap between the HPM event CSRs and the machine trap setup CSRs (introduced in version 1.5.3.6); |
|
| 02.04.2021 | 1.5.3.6 | 🐛 fixed bug in external memory interface (neorv32_wishbone.vhd) that caused bus exceptions when using external memories with very high access latencies (race condition in bus timeouts); VHDL code clean-up |
|
| 30.03.2021 | 1.5.3.5 | added new top's generic HPM_CNT_WIDTH (type natural, default=40) to configure the total bit width of the hardware performance monitors (HPM) counter (min 1, max 64); mofified crt0.S: stops all counters (incl. HPMs), no user-level access to ANY counter; neorv32.h: added missing mcounteren and mcountinhibit CSR bit definitions |
|
| 28.03.2021 | 1.5.3.4 | default "test setup" rtl/top_templetes/neorv32_test_setup.vhd: disabled PMP, implementing 4 HPM counters; ✨ added boards folder for exemplary FPGA setups |
|
| 27.03.2021 | 1.5.3.3 | minor optimization in CPU control engine; FPU comparator now uses comparators results from main ALU (reduces FPU hardware footprint) | |
| 26.03.2021 | 1.5.3.2 | ✨ added single-precision floating-point unit (FPU) rtl/core/neorv32_cpu_cp_fpu.vhd implementing the Zfinx CPU extension; added/updated Zfinx intrinsic library and verification framework: sw/example/floating_point_test; added co-processor timeout counter to CPU to auto-terminate co-processor operations (for debugging only; defaullt=deactivated) |
|
| 25.03.2021 | 1.5.3.1 | 🐛 fixed bug in invalid floating-point instruction detection (caused CPU to stall if executing an invalid floating-point operation); intrinsic core library (mainly used for not-yet-supported CPU extensions like B and Zfinx): clean-up, added R3 instruction type |
|
| 24.03.2021 | 🚀1.5.3.0 | New release | |
| 23.03.2021 | 1.5.2.9 | ✨ added new top generic to enable single-precision floating-point extensions Zfinx: CPU_EXTENSION_RISCV_Zfinx - type boolean, default = false, Z* extensions (from mzext CSR) like Zifencei |
|
| 21.03.2021 | 1.5.2.8 | 🐛 fixed problem with linking math.h library in makefile; added floating-point-related global definitions to main VHDL package; added intrinsic core library file sw/lib/include/neorv32_intrinsics.h - intrinsic library support for CPU extensions, which are not yet supported by the upstream GCC, are based on this |
|
| 18.03.2021 | 1.5.2.7 | 🐛 fixed bug in sw/common/crt0.S dummy exception handler (wrong order of register push/pop); changed upcoming floating-point extension (originally F extension) to Zfinx extension (-> RISC-V Zfinx spec) - updated CPU infrastructure |
|
| 16.03.2021 | 1.5.2.6 | reworked atomic/exclusive memory access interface: removed CPU's d_bus_lock_o and i_bus_lock_o signal (was always zero anyway); removed top's wb_lock_o signal; added exclusive access request to Wishbone tag signal wb_tag_o (is now one bit wider); added more details to NEORV32.pdf regarding excluisve/atomic memory accesses (interface/protocol) |
|
| 09.03.2021 | 1.5.2.5 | added bit-manipulation Zba sub-extension (shifted-adds: SH1ADD SH2ADD SH3ADD) |
|
| 07.03.2021 | 1.5.2.4 | ✨ added new IO/peripheral module: Smart LED Interface (NEOLED) to interface intelligent LEDs (WS2812/WS2811/NeoPixel(c) compatible; supports RGB and RGBW LEDs in parallel) with internal TX buffer; new top generics: IO_NEOLED_EN: implement NEOLED interface when true; new top signals: neoled_o: single-wire async. serial data interface; FIFO re-fill interrupt via fast interrupt request channel 9 FIRQ9; added new "NEOLED" section to data sheet; added SW driver library and simple NEOLED example program (sw/example/demo_neopixel) |
|
| 06.03.2021 | 1.5.2.3 | clean-up of CPU control code: fixed minor bug in F-exension's instruction decoding; changed coding style for CSR write access (old version might have caused "inferring latch..." warning in Intel Quartus); fixed default values for CSRs when according extensions are disabled | |
| 04.03.2021 | 1.5.2.2 | added two new generics to configure CFS IO conduit sizes (implementing issue #13): IO_CFS_IN_SIZE - type: positive, configures the size of cfs_in_i signal; IO_CFS_OUT_SIZE - type: positive, configures the size of cfs_out_o signal; minor edits to floating-point CPU infrastructure |
|
| 03.03.2021 | 1.5.2.1 | added CPU core infrastructure for upcoming single-precision floating-point extension F; rtl/core/neorv32_cpu_cp_fpu.vhd (blank template!) |
|
| 01.03.2021 | 🚀1.5.2.0 | New release | |
| 27.02.2021 | 1.5.1.11 | 🐛 fixed several small bugs in bitmanipulation extension instruction decoding (not all B instructions triggered and illegal instruction exception when B-extension = disabled) |
|
| 25.02.2021 | 1.5.1.10 | 🐛 fixed bugs in UART RTS/CTS hardware control flow - the new setup was verified on real hardware; added double-buffering to UART RX engine | |
| 24.02.2021 | 1.5.1.9 | mcounteren CSR is hardwired to zero if user mode is not implemented (CPU_EXTENSION_RISCV_U = false); added Zbs (single-bit operations) sub-extension to bit-manipulation unit |
|
| 22.02.2021 | 1.5.1.8 | added programmable RTS/CTS hardware flow control to UARTs; new top signals: uart0_rts_o, uart0_cts_i, uart1_rts_o, uart1_cts_i; UART.TX engine will only start sending (if CTS flow control is activated) if uart*_cts_i is asserted (low-active); UART.RX engine signals (if RTS flow control is activated) via uart*_rts_o if it is ready to receive new data (low-active); added hw flow control parameter to uart setup functions neorv32_uart*_setup() |
|
| 20.02.2021 | 1.5.1.7 | removed err_o signal from custom functions subsystem CFS; processor SoC fast interrupt input soc_firq_i reduced to 6 channels (was 8) - mapped to CPU's FIRQ_10 - FIRQ_15; added individual fast IRQs for UART1 "RX complete" and "TX complete" conditions (-> FIRQ_4 & FIRQ_5); changed FIRQ channels of TWI/SPI/GPIO interrupts |
|
| 18.02.2021 | 1.5.1.6 | added register buffer for enable signals to processor-internal clock generator; 🐛 fixed bug in sw/example/demo_twi program: TWI clock speed message was wrong (factor 1/4 was missing) |
|
| 17.02.2021 | 1.5.1.5 | added a second independent UART: new UART is secondary UART UART0, the "old" UART is now the primary UART UART0; by default the primary UART (UART0) is used for all user interface connection; reworked fast interrupt FIRQ assignment/priority list - added UART1 RTX (receive or send done) fast interrupt; added hardware driver functions for new UART1 - the "old" neorv32_uart_* function calls will map to the primary UART UART0 for compatibility; renamed compiler flag to enable UART "simulation mode": UART_SIM_MODE -> UART0_SIM_MODE for primary UART, UART1_SIM_MODE for secondary UART (UART_SIM_MODE is still supported for compatibility and maps to UART0_SIM_MODE); added second simulation UART receiver for UART1 to testbench; renamed UART simulation output files: neorv32.testbench_uart.out -> neorv32.testbench_uart0.out (testbench UART0 receiver), new: neorv32.testbench_uart1.out (testbench UART1 receiver), neorv32.uart.sim_mode.text.out and neorv32.uart.sim_mode.data.out -> neorv32.uart0.sim_mode.text.out and neorv32.uart0.sim_mode.data.out (for UART0), new neorv32.uart1.sim_mode.text.out and neorv32.uart1.sim_mode.data.out (for UART1) |
|
| 13.02.2021 | 1.5.1.4 | HW_THREAD_ID generic is now of type natural; mret instruction now requires an additional cycle to execute; logic optimization of CPU's control logic -> smaller hardware footprint and higher f_max; updated CPU synthesis results; removed top module's generic initialization using (others => '0') (targeting issue #8) |
|
| 09.02.2021 | 1.5.1.3 | modified CPU architecture: now using a "pseudo" ALU co-processor to get the result of a CSR read operation into data path, removing one input from register file input mux -> shorter critical path | |
| 08.02.2021 | 1.5.1.2 | added new peripheral/IO module: Numerically-Controlled Oscillator NCO: three independent channels, 20-bit phase accu, 20-bit tuning word, fixed 50% duty cycle mode or pulsed mode; added according HW drivers and example program |
|
| 07.02.2021 | 🚀1.5.1.0 | New release | |
| 05.02.2021 | 1.5.0.11 | 🐛 fixed error in atomic instruction LR.W |
|
| 05.02.2021 | 1.5.0.10 | CPU now provides 16 fast interrupt request lines (FIRQ0 .. FIRQ15) with according mie/mip CSR bits and mcause trap codes; removed IRQ enable flags from SPI, UART & TWI; reworked processor-internal interrupt system - assignment/priority list; UART now features individual IRQs for "RX-done" and "TX-done" conditions; changed bit order in TWI control register |
|
| 29.01.2021 | 1.5.0.9 | removed custom function units CFU0 & CFU1; ✨ replaced them by new Custom Functions Subsystem CFS, which provides up to 32x32-bit memory-mapped registers; new configuration generics: IO_CFS_EN, IO_CFS_CONFIG; new top entity signals: cfs_in_i, cfs_out_o; increased processor's IO area from 128 bytes to 256 bytes, now starting at 0xFFFFFF00 |
|
| 28.01.2021 | 1.5.0.8 | added critical limit for number of implemented PMP regions: When implementing more PMP regions that a certain critical limit an additional register stage is automatically inserted into the CPU’s memory interfaces increasing the latency of instruction fetches and data access by +1 cycle. The critical limit can be adapted for custom use by a constant from the main VHDL package file (rtl/core/neorv32_package.vhd). The default value is 8: constant pmp_num_regions_critical_c : natural := 8; |
|
| 27.01.2021 | 1.5.0.7 | added four additional fast interrupt channels FIRQ4..7, available via processor's top soc_firq_i(3:0) signal for custom platform use; fixed minor error in UART setup function (baud rate prescaler calculation for very high baud rates) |
|
| 26.01.2021 | 1.5.0.6 | minor logic optimization of CPU's B extension co-processor (reducing area); minor logic optimization or HPM triggers (reducing area); reworked CPU's co-processor interface; minor logic optimization of branch condition check (to shorten critical path) |
|
| 23.01.2021 | 1.5.0.5 | reworked true random number generator TRNG: architecture is now based on several simple ring oscillators with incrementing length; changed control register bits; updated according driver functions and demo program |
|
| 22.01.2021 | 1.5.0.4 | 🐛 fixed BUG in bootloader (that caused it to immediately crash after reset if SPI/MTIME/GPIO peripherals were not implemented); reworked watchdog timer WDT: removed watchdog access password, added option to lock configuration until next system reset, changed control register bits - updated driver functions and demo/test programs |
|
| 17.01.2021 | 1.5.0.3 | CPU data register file can now be mapped to a single "true dual-port" block RAM by the synthesizer (requiring only 1024 memory bits instead of 2048); 🐛 fixed typo error in sim/rtl_modules/neorv32_imem.vhd; modified M co-processor (due to register file read access modification), reduced switching activity when co-processor is idle; logic/arithmetic operations of B extension only require 3 cycles now, reduced switching activity when co-processor is idle |
|
| 15.01.2021 | 1.5.0.2 | added instruction cache associativity configuration (number of sets); new configuration generic: ICACHE_ASSOCIATIVITY -> number of sets (1 = direct mapped, 2 = 2-way set-associative), has to be a power of two; if associativity is > 1 the used replacement policy is least recently used (LRU); 🐛 fixed bug in sw/lib/source/neorv32_cpu.c PMP.CFG configuration function |
|
| 14.01.2021 | 1.5.0.1 | added new HPM trigger event: multi-cycle ALU operation wait cycle (HPMCNT_EVENT_WAIT_MC); renamed neorv32_cache.vhd -> neorv32_icache.vhd |
|
| 10.01.2021 | 🚀1.5.0.0 | Renamed configuration generics: *_USE -> *_EN |
|
| 10.01.2021 | 1.4.9.10 | ✨ Added support for bit manipulation extension (B) - base subset Zbb only (:warning: RISC-V B (sub-)extensions are not officially ratified yet; compatible to version "0.94-draft"); enabled via new configuration constant CPU_EXTENSION_RISCV_B (default = false); uported Zbb instructions: CLZ CTZ CPOP SEXT.B SEXT.H MIN[U] MAX[U] ANDN ORN XNOR ROL ROR RORI zext(pseudo-instruction for PACK rd, rs, zero) rev8(pseudo-instruction for GREVI rd, rs, -8) orc.b(pseudo-instruction for GORCI rd, rs, 7); added B flag to misa CSR; added Zbb flag to mzext CSR |
|
| 03.01.2021 | 1.4.9.8 | Added HPM trigger for instruction issue wait cycle (caused by pipeline flush); all HPM counters do not increment if CPU is sleep mode; fixed CoreMark timer overflow issues; rtl/core/neorv32_busswitch.vhd: removed wait states, less load/store wait cycles -> faster execution; updated CoreMark results |
|
| 02.01.2021 | 1.4.9.7 | ✨ added RISC-V hardware performance monitors (HPM); new CSRs: mhpmevent*(3..31), [m]hpmcounter*[h](3..31), amount configurable via top's generic HPM_NUM_CNTS; supported counter events: active cycle, retired instruction, retired compressed instruction, instruction fetch memory wait cycle, load operation, store operation, load/store memory wait cycle, unconditional jump, conditional branche (all), conditional taken branch, entered trap, illegal instruction exception; PMP can now have up to 64 regions; number of regions configured via top's PMP_NUM_REGIONS generic; removed obsolete top's PMP_USE generic; removed PMP flag from mzext CSR; minimal region granularity (in bytes) configured via top's PMP_MIN_GRANULARITY generic, has to be a power of two and >= 8 bytes; 🐛 fixed bug in sleep (wfi) instruction |
|
| 29.12.2020 | 1.4.9.5 | New UART features: "frame check" (test if stop bit is set), error indicated via UART_DATA reg's UART_DATA_FERR flag; configurable parity bit (UART_CT.UART_CT_PMODE1:UART_CT_PMODE0, 00=no parity; 10=even parity; 11=odd parity); parity error indicated via UART_DATA reg's UART_DATA_PERR flag; moved UART's RX overrun flag to UART_DATA.UART_DATA_OVERR |
|
| 26.12.2020 | 1.4.9.4 | removed zicnt_en option (was used to discard the standard RISC-V counters and timers from implementation); added missing mcounteren CSR (to allow read-access from user-level code to cycle[h] / time[h] / [m]instret[h] CSRs); available bits: 0: CY, 1: TM, 2: IR; added missing mcountinhibit CSR (to disable auto-increment of [m]cycle[h] / [m]instret[h] CSRs); available bits: 0: CY, 2: IR; CPU_* -> CSR_* |
|
| 25.12.2020 | 1.4.9.3 | Added missing UBE flag to mstatus CSR, indicates Endianness for load/stores in user mode (always set indicating BIG-endian mode), is a copy of mstatush.mbe |
|
| 23.12.2020 | 1.4.9.2 | ✨ added processor-internal instruction cache rtl/core/neorv32_cache.vhd (direct mapped); new configuration generics: ICACHE_USE (implement cache), ICACHE_BLOCK_SIZE (cache block/page/line size), ICACHE_NUM_BLOCKS (number of cache blocks); added SYSINFO_CACHE register to SYSINFO to check cache configuration by software |
|
| 20.12.2020 | 1.4.9.1 | 🐛 fixed bug in CPU's instruction fetch engine (alignment_errros/bus_errors were not acknowledged correctly); added BUS_TIMEOUT generic to CPU (defines the amount of cycles after which an unacknowledged bus access will get terminated and raises a bus access fault exception) |
|
| 19.12.2020 | 🚀1.4.9.0 | Testbench: added memory-mapped triggers to trigger core's "machine software & external interrupts"; sw/example/cpu_test: removed CFU tests, added MEI and MSI tests; added RISC-V-Compliance Test Framework to repository (riscv-compliance/), core passes all rv32 tests (riscv-compliance v2.1) |
|
| 18.12.2020 | 1.4.8.13 | Added additional simulation files: simulation-optimized IMEM-ROM (so far, this is only relevant for the new NEORV32 RISC-V Compliance test framework v2.0); ✨ Processor now passes all rv32 tests of the new RISC-V Compliance Test Framework v2.0 ✨ |
|
| 16.12.2020 | 1.4.8.12 | mtval CSR generation (wrong value for "breakpoint" trap); updated mtval value table in data sheet; fixed bug in load/store operation (introduced in version 1.4.8.10) |
|
| 16.12.2020 | 1.4.8.11 | mtval CSR generation (wrong values for some traps); fixed bug in mip CSR (writing zero to implemented bits now actually clears pending interrupts); fixed bug in IRQ priority encoding (machine software interrupt MSI comes before machine timer interrupt MTI) |
|
| 12.12.2020 | 1.4.8.10 | trap_reset_c encoding (in it's expanded form it should be 0x80000000) and reset logic: hardware mcause register is now set to trap_reset_c after a hardware reset; crt0.S start-up code now sets mcause to trap_reset_c after finishing hardware setup |
|
| 11.12.2020 | 1.4.8.9 | Added option to exclude standard RISC-V performance counters ([m]cycle[h] and [m]instret[h]) for size-constrained implementations; disabled by setting VHDL package's zicnt_en_c constant to false; software can determine state of zicnt_en_c via mzext CSR's CPU_MZEXT_ZICNT bit; added new signal to processor top entity: mtime_i, this signal is used for updateting the time[h] CSRs if the processor-internal MTIME unit is disabled (via IO_MTIME_USE = false) |
|
| 10.12.2020 | 1.4.8.8 | Added missing mstatush CSR (only bit MBE is implemented yet); added option to configure external bus interface for BIG- or little-endian byte-order, configured via VHDL package xbus_big_endian_c constant, default = BIG-endian, software can check endianness of the interface via SYSINFO's SYSINFO_FEATURES(SYSINFO_FEATURES_MEM_EXT_ENDIAN) flag; added mstatush CSR and endianness information to data sheet |
|
| 09.12.2020 | 1.4.8.7 | Added missing environment call from U-mode exception (via ecall instruction in user-mode); added environment call from U-mode to data sheet |
|
| 09.12.2020 | 1.4.8.6 | A extension could not be used without MULDIV M extension, CPU might have permanently stalled when executing an instruction from a disabled ISA extension; 🔒 added security feature: illegal user-level CSR read access will always return zero; added new section Execution Safety to neorv32.pdf data sheet |
|
| 07.12.2020 | 1.4.8.5 | ||
| 05.12.2020 | 1.4.8.4 | PMP_NUM_REGIONS and PMP_GRANULARITY CPU/processor generics (PMP configuration now via package constants); reworked section 2.4. Instruction Sets and CPU Extensions of neorv32.pdf |
|
| 04.12.2020 | 1.4.8.2 | Added PMA (physical memory attribute) to processor-internal IO region: NO EXECUTE; added 3.3.Address Space/Physical Memory Attributes (PMAs) section to neorv32.pdf |
|
| 03.12.2020 | 1.4.8.1 | Optimized CPU program counter (PC) update logic and "next PC" computation (shortened critical path); updated bootloader (configuration option for direct-boot-from-SPI-flash only) and customization text in neorv32.pdf | |
| 01.12.2020 | 🚀1.4.8.0 | A (atomic) extension support (only lr.w and sc.w instructions yet); added lock signal to CPU and processor's external bus interface |
|
| 28.11.2020 | 1.4.7.6 | Split ALU core operations: shortened critical path - replaced ALU output 8:1 mux by a 4:1 mux | |
| 26.11.2020 | 1.4.7.5 | Minor rtl clean-up; CSR access instructions are one cycle faster now (3 cycles now); system/environment instructions (ecall ebreak mret wfi) need one additional cycle (4 cycles now) |
|
| 25.11.2020 | 1.4.7.4 | FENCE.I instruction that corrupted instruction fetch when executing code from processor-external memory; default testbench (sim/neorv32_tb.vhd) now features external IMEM, external DMEM and external IO connected via external bus interface; simulation now allows CPU to execute code using external memories only (no internal IMEM/DMEM); optimized CPU's instruction fetch interface (no more unnecessary transfer cancel requests) |
|
| 20.11.2020 | 1.4.7.2 | wishbone) now makes sure that a canceled bus transfer is really understood by the accessed peripheral |
|
| 20.11.2020 | 1.4.7.1 | Removed deprecated "update_enable signal" from IMEM | |
| 11.11.2020 | 🚀1.4.7.0 | Further optimized pipeline front-end: Jumps and branches are one cycle faster (+5% coremark performance); updated synthesis results; updated performance results; added hello_world example program |
|
| 07.11.2020 | 1.4.6.7 | Updated bootloader (size optimization) and changed processor version output; added project logo; minor data sheet edits | |
| 03.11.2020 | 1.4.6.6 | Removed SPI module's buggy "LSB-first mode", SPI module now always sends data MSB-first; removed SPI.CTRL SPI_CT_DIR bit; modfied bit order in SPI CTRL register; updated SPI SW library |
|
| 02.11.2020 | 1.4.6.5 | ||
| 01.11.2020 | 1.4.6.4 | [m]instret[h] and [m]cycle[h] carry logic; CPU hardware optimizations (area reduction, shortened critical path) |
|
| 29.10.2020 | 1.4.6.3 | rtl code clean-up; made preparations for additional co-processors | |
| 25.10.2020 | 1.4.6.2 | Added tag signal (wb_tag_o) to processor's Wishbone bus; removed processor's priv_o - privilege level is now encoded in Wishbone tag signal; added a more sophisticated FreeRTOS example ("full_demo") |
|
| 24.10.2020 | 🚀1.4.6.0 | Completely reworked external memory interface (WISHBONE), removed now-obsolete processor generic MEM_EXT_REG_STAGES; added processor wrapper with AXI4-Lite interface |
|
| 22.10.2020 | 1.4.5.11 | TWI: Added new control register flag to enable/disable SCL clock stretching by peripheral devices | |
| 22.10.2020 | 1.4.5.10 | Added i_bus_priv_o and d_bus_priv_o signals to CPU_top and priv_o to Processor_top to show privilege level of bus access (from mstatus MPP); |
|
| 20.10.2020 | 1.4.5.9 | WFI - wait for interrupt) |
|
| 20.10.2020 | 1.4.5.8 | Machine timer interrupt is available as processor input pin (mtime_irq_i) if internal MTIME is not implemented (IO_MTIME_USE = false) |
|
| 18.10.2020 | 1.4.5.7 | Added new IO peripheral/Device: Second CFU (CFU1); renamed old CFU to CFU0; CFU VHDL files: neorv32_cfu0.vhd & neorv32_cfu1.vhd; removed CFU interrupt |
|
| 17.10.2020 | 1.4.5.5 | New makefile target upload allows to directly upload an executable to the bootloader from the console |
|
| 17.10.2020 | 1.4.5.4 | Added new CPU/Processor generic FAST_SHIFT_EN (default = false) to enable implementation of a fast (but large) barrel shifter for accelerating CPU shift instructions; updated CoreMark performance results |
|
| 16.10.2020 | 1.4.5.2 | Added read-only flag to custom mzext CSR to check if physical memory protection (PMP) is implemented; added [C] mzext CSR name aliases to neorv32.h |
|
| 15.10.2020 | 1.4.5.1 | Fixed "unprecise exceptions": mtval did not always reflect the correct value according to the instruction that caused the exceptions; fixed bug in RTE: Debug trap handler was not showing the correct mepc value |
|
| 13.10.2020 | 🚀1.4.5.0 | An official open-source RISC-V architecture ID was assigned to the project: decimal = 19, 32-bit hexadecimal = 0x00000013 - software can retrieve the ID from the marchid CSR |
|
| 12.10.2020 | 1.4.4.9 | Added alignment flags to makefiles: branch/jump/call targets are forced to be 32-bit aligned -> increases performance when using the C extension; added makefile flag listing to NEORV32.pdf; updated performance results for CPUs with C extension; crt0.S will initialize all registers with zero if not using E extension and not compiling bootloader |
|
| 11.10.2020 | 1.4.4.8 | Reworked pipeline frontend: Optimized fetch engine, added issue engine, faster instruction fetch after taken branches + reduced hardware requirements; updated synthesis and performance results | |
| 11.10.2020 | 1.4.4.6 | Added option to configure external memory interface (Wishbone) to either use standard/classic protocol (default) or pipelined protocol (for better timing): via wb_pipe_mode_c constant in VHDL package file (rtl/core/neorv32_package.vhd); added help text to NEORV32.pdf section "3.4.4. Processor-External Memory Interface (WISHBONE)" |
|
| 08.10.2020 | 1.4.4.5 | Removed CPU's BUS_TIMEOUT and processor's MEM_EXT_TIMEOUT generics; instead, a global configuration bus_timeout_c in the VHDL package file is used now |
|
| 08.10.2020 | 1.4.4.4 | Removed DEVNULL device; all simulation output options from this device are now available as SIM_MODE in the UART; mcause CSR can now also be written; FIXED: trying to write a read-only CSR will cause an illegal instruction exception; for compatibility reasons any write access to the misa CSR will be ignored and will NOT cause an exception |
|
| 07.10.2020 | 1.4.4.2 | Simplified ALU's set of core operations; removed co-processor data mux right after ALU -> shorter critical path; CPU control VHDL code clean-up and CSR write logic optimization; optimized IMEM/DMEM access logic; added note regarding alignment of IMEM/DMEM | |
| 05.10.2020 | 🚀1.4.4.0 | ||
| 02.10.2020 | 1.4.3.9 | [m]cycleh and [m]instreth CSRs are now 32-bit wide (-> fully RISC-V-compliant) |
|
| 01.10.2020 | 1.4.3.8 | Added CPU top entity wrapper with resolved port signals rtl/top_templetes/neorv32_cpu_stdlogic.vhd; optimized ALU core functions – shorter critical path, less control overhead, reduced HW footprint |
|
| 27.09.2020 | 1.4.3.3 | Further improved ALU and control logic; CSR access instruction require one additional cycle now (to let side effects kick in); updated synthesis results; added CFU hardware driver dummy | |
| 26.09.2020 | 1.4.3.2 | CSRRWI instruction (introduced with version 1.4.3.1); further ALU operand logic optimizations; updated CPU data path figure |
|
| 25.09.2020 | 1.4.3.1 | Register file's x0 is now a physical register; this register is initialized by the hardware and locked afterwards; removed "set to zero" stage -> smaller hardware footprint and shorter critical path; added processor top entity wrapper with resolved signals rtl/top_templetes/neorv32_top_stdlogic.vhd |
|
| 16.09.2020 | 🚀1.4.3.0 | Simplified memory configuration: removed processor top's memory space configuration generics (MEM_ISPACE_BASE, MEM_ISPACE_SIZE, MEM_DSPACE_BASE, MEM_DSPACE_SIZE); data/instruction space sizes are irrelevant for hardware; instruction/data space base addresses are fixed (but can be modified in NEORV32 VHDL package file); modified SYSINFO registers; adapted bootloader, crt0 start-up code and linker script; stack configuration is now done via linker script; reworked chapter "address space"; added CFU interrupt -> fast interrupt channel 1 (shared with GPIO) |
|
| 14.09.2020 | 1.4.2.0 | Removed option to disable CSR counters (via CSR_COUNTERS_USE generic) since these counters are mandatory according to the RISC-V specs; added new IO/peripheral device: custom functions unit (CFU) for tightly-coupled custom co-processors; improved timing of processor-internal clock generator; fixed wrong labels in address space figure and removed dedicated exception vectors box; added mask register to GPIO unit to specify which input pins can trigger a pin-change interrupt |
|
| 11.09.2020 | 1.4.0.4 | Reworked TRNG architecture and interface; added text regarding fast interrupt channels usage for the NEORV32 processor |
|
| 02.09.2020 | 1.4.0.2 | ||
| 01.09.2020 | 1.4.0.1 | Using registers above x15 when the E extensions is enabled will now correctly cause an illegal instruction exception |
|
| 29.08.2020 | 🚀1.4.0.0 | Rearranged and reworked data sheet; added FreeRTOS port, demo & short referencing chapter; removed bootloader-specific linker scripts – main linker script is used for both, applications and bootloader; bootloader can now have .data and .bss sections; improved IMEM and BOOTROM memory initialization – faster synthesis; image generator now constrains init array size to actual executable size; peripheral/IO devices can only be written in full word mode (= 32-bit); GPIO ports are now 32-bit wide |
|
| 23.08.2020 | 1.3.7.3 | Added custom mzext CSR to check for available Z* CPU extensions; multiplier's FAST_MUL mode is one cycle faster now; updated performance data |
|
| 20.08.2020 | 1.3.7.2 | Removed bootloader-specific crt0 – bootloader now uses std crt0; makefiles now also support asm and cpp files; made linker scripts more general; renamed makefile "compile" (which is still available for compatibility) target into "exe" | |
| 14.08.2020 | 🚀1.3.7.0 | Simplified CPU fetch engine; added configurable CPU instruction prefetch buffer (ipb) FIFO; optimized CPU execute engine; updated performance data | |
| 06.08.2020 | 1.3.6.5 | Added FAST_MUL_EN generic to enable mapping of the multiplier core to DSP blocks; ALU.shifter is no more triggered when executing MULDIV operations; added benchmark results for DSP-based multiplier configurations; updated implementation and performance results; simplified makefiles – using implicit libc definition; crt0 only initializes lowest 16 registers |
|
| 03.08.2020 | 🚀1.3.6.0 | Relocated DEVNULL (changed base address); minor edits, optimization and clean-ups |
|
| 30.07.2020 | 1.3.5.2 | Added register stage to PMP mask generation to shorten critical path; removed automatic IRQ enable/disable from RTE install/uninstall functions | |
| 30.07.2020 | 1.3.5.1 | misa.Z flag is not yet defined by the RISC-V specs., hence it is read-only and read as zero |
|
| 29.07.2020 | 1.3.5.0 | Added user privilege level, enabled via new CPU_EXTENSION_RISCV_U generic; mstatus(mpie) logic; implemented RISC-V spec.-compliant Physical Memory Protection (PMP); allows up to 8 regions but only NAPOT mode is supported yet |
|
| 25.07.2020 | 1.3.0.0 | mcause CSR is read-only now!; removed CLIC, added 4 fast IRQ channels to CPU with according flags in mie and mip and trap IDs; updated core libraries; updated NEORV32 RTE; highly reworked data sheet; updated synthesis and performance results |
|
| 21.07.2020 | 1.2.0.6 | Added doc section regarding the CPU's data and instruction interfaces; optimized CPU fetch engine; updated iCE40 synthesis results | |
| 20.07.2020 | 1.2.0.5 | Less penalty for taken branches and jumps (2 cycles faster) | |
| 19.07.2020 | 1.2.0.0 | CPU bus unit now has independent buses for instruction fetch and data access – merged into single processor bus via new bus switch unit; doubled speed of ALU shifter unit again; all bits of mcause CSR can now be modified by application program (full RISC-V-compliant); performance counters CSRs [m]cycleh and [m]instreth are only 20-bit wide; removed NEORV32-specific custom CSRs – all processor-related information can be obtained from the new SYSINFO IO module (CPU is now more independent from processor configuration); changed IO address of DEVNULL; fixed bug in bootloader's trap handler; added USER_CODE generic to assign a custom user code that can be read by software (from SYSINFO) |
|
| 14.07.2020 | 1.1.0.0 | Added fence_o and fencei_o signals to top entity to show if a fence or fencei instruction is executed; added mvendorid and marchid CSRs (both are always zero); ALU shift unit is faster now; two lowest bits of mtvec are always zero; fixed wrong instruction exception priority; removed HART_ID generic – mhartid CSR is always read as zero; performance counters ([m]cycle[h], [m]instret[h] and time[h]) are also available in embedded mode – but can be explicitly disabled via the CSR_COUNTERS_USE generic; mcause CSR only allows write access to bit 31 and bits 3:0; updated synthesis reports |
|
| 10.07.2020 | 1.0.6.0 | Non-taken branches are now 1 cycle faster; the time[h] CSR now correctly reflects the system time from the MTIME unit; fixed WFI instruction permanently stalling the CPU; [m]cycle[h] counters now stop counting when CPU is in sleep mode; minstret[h] and mcycle[h] now also allow write-access |
|
| 09.07.2020 | 1.0.5.0 | X flag of misa CSR is zero now; the default SPI flash boot address of the bootloader is now 0x0080000; new exemplary FPGA utilization results for Intel, Lattice and Xilinx; misa CSR is read-only again, switching compressed extension on/off is pretty bad for the fetch engine; mtval and mcause CSRs now allow write accesses and are finally RISC-V-compliant; time low and high registers of MTIME peripheral can now also be written by user; MTIME registers only allow full-word write accesses |
|
| 06.07.2020 | 1.0.1.0 | Added missing fence instruction; added new generic to enable optional Zifencei CPU extension for instruction stream synchronization |
|
| 05.07.2020 | 1.0.0.0 | New CPU architecture: Fetch and execute engines; increased CPI; timer and counter CSRs are now all 64-bit wide; C.LW decompression logic; misa flags C and M are now r/w – compressed mode and multiplier/divider support can be switched on/off during runtime; PC(0) is now always zero; |
|
| 25.06.2020 | 0.0.2.5 | Added DEVNULL device; added chapter regarding processor simulation; fixed/added links; fixed typos; added FPGA implementation results for iCE40 UP |
|
| 23.06.2020 | 🚀0.0.2.3 | Publication |