StandardUnicodeImplementation_patch #2
Merged
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
…k#8757) GCC 4.9.4 is no longer available on Gentoo (or Sabayon), which causes problems when attempting to install on either of these platforms. Since QMK is not particularly sensitive to its GCC version, modify the version restriction to <9 so newer versions of GCC may be installed. Since the toolchain for arm-none-eabi isn't currently installed as part of setup, add that as well. Additionally, drop the Python installation as part of the Gentoo installation process. Python is a core system package on Gentoo and can therefore be assumed to be present; in addition, the slot restriction of 3.5 which was present is also no longer available in Gentoo. Finally, separate the gcc rebuild invocation of `emerge` from the new packages that may need to be installed, and apply the `--noreplace` flag to new packages so that they are not rebuilt if already present.
* Add Rekt1800 keyboards * Update keyboards/cannonkeys/rekt1800/config.h * Update keyboards/cannonkeys/rekt1800/info.json * Apply suggestions from code review * Apply suggestions from code review * Remove line * Apply suggestions from code review
* Add VIA keymap for Wasdat * Enable Bootmagic Lite at keyboard level
* Atlas keyboard * Update info and readme * Update firmware * Apply suggestions from code review * Updates * Add 2x2U layout * Minor cleanup * Fix trailing comma * Remove line * Apply suggestions from code review
* Fix bug with layer caching in get_event_keycode * Improve naming
* Add handwired BDN9-BLE * Apply suggestions from code review Co-Authored-By: Ryan <[email protected]> * Update keyboards/handwired/bdn9_ble/rules.mk Co-Authored-By: Ryan <[email protected]> * Update keyboards/handwired/bdn9_ble/rules.mk Co-Authored-By: Ryan <[email protected]> * Update keyboards/handwired/bdn9_ble/readme.md Co-Authored-By: James Young <[email protected]> Co-authored-by: Ryan <[email protected]> Co-authored-by: James Young <[email protected]>
* jotpad16 status leds * jotpad16 * readme.md
* Added Workman ZXCVM variation * Update quantum/keymap_extras/keymap_workman_zxcvm.h Co-Authored-By: Konstantin Đorđević <[email protected]> * Update quantum/keymap_extras/sendstring_workman_zxcvm.h Co-Authored-By: Ryan <[email protected]> * Update quantum/keymap_extras/keymap_workman_zxcvm.h Co-Authored-By: Ryan <[email protected]> * Update quantum/keymap_extras/keymap_workman_zxcvm.h Co-Authored-By: Ryan <[email protected]> * Update quantum/keymap_extras/sendstring_workman_zxcvm.h Co-Authored-By: Ryan <[email protected]> Co-authored-by: Konstantin Đorđević <[email protected]> Co-authored-by: Ryan <[email protected]>
* copy nyquist setup * enable i2c * update colors * update readme * Update keyboards/keebio/nyquist/keymaps/georgepetri3/keymap.c Co-Authored-By: Joel Challis <[email protected]> Co-authored-by: Joel Challis <[email protected]>
* dipsw test on helix/rev2/sc/back:five_rows * bug fix quantum/dip_switch.c * test end. remove test code. Revert "dipsw test on helix/rev2/sc/back:five_rows" This reverts commit 4b13ebb. * dipsw test on helix/rev2/sc/back:five_rows * update quantum/dip_switch.c * test end. remove test code. Revert "dipsw test on helix/rev2/sc/back:five_rows" This reverts commit bf99ace.
* Added handwired Leopold fc200rt * Update readme.md * Update readme.md * Update readme.md * Update readme.md * Delete readme.md * Delete config.h * Update readme.md * Update rules.mk * Update keyboards/handwired/fc200rt_qmk/fc200rt_qmk.c Co-Authored-By: Ryan <[email protected]> Co-authored-by: Ryan <[email protected]>
) * Add support for Caps Lock LED Currently ignores the fact that led_state is not synced between halves, so caps lock LED doesn't do anything if USB is plugged into right half * Set initial backlight and RGB mode/values on blank EEPROM * Set default VIA layout options * Add backlight/RGB ifdefs * Set bootloaders for each rev
* id80: New keyboard (IDOBAO ID80) Add initial support for the IDOBAO ID80 keyboard. Most source files were generated by the KBFirmware JSON to QMK Parser (https://noroadsleft.github.io/kbf_qmk_converter/) based on the ID80.json file provided by the keyboard vendor. The only change to rules.mk was to set `COMMAND_ENABLE = no` to make the compiled firmware fit into the available flash space. * id80: Update default keymap to match stock Update the Fn layer in the default keymap to match the stock firmware which was actually flashed into the PCB. * id80: Add Caps Lock indicator support Although the KBFirmware JSON includes information about the MCU pins used for keyboard indicator LEDs, the KBF to QMK converter does not generate the required code automatically. Implement the LED handling code, and at the same time switch from the older `led_set_kb` API to the newer `led_update_kb`. * id80: Remove placeholder functions The provided skeletons for `matrix_scan_kb` and `process_record_kb` did not do anything useful, so remove them. * id80: Use Esc as the Bootmagic Lite activation key The Esc key is not at the (0, 0) position in the ID80 matrix, therefore setting `BOOTMAGIC_LITE_ROW` and `BOOTMAGIC_LITE_COLUMN` is required to use the Esc key for Bootmagic Lite. * id80: Update info.json Replace info.json generated by the KBF to QMK converter with another version generated using http://www.keyboard-layout-editor.com/ and the KLE raw to QMK info.json converter (https://qmk.fm/converter/). The updated info.json has the correct physical layout (the distance between the function key row and the main block is actually 0.25U, but the vendor-provided ID80.json had 0.5U there) and correct key labels (using the stock layout instead of raw matrix locations and pin names). * id80: Enable NKRO The default keymap is updated to have NK_TOGG at Fn+N, like most other keyboards which have NKRO enabled. * id80: Use unique USB vendor/product ID Having an unique USB vendor/product ID is required for VIA support. The vendor ID value is the same as for the `idobo` (ID75) keyboard. * id80: Fix right modifiers in the default keymap For some reason the default keymap converted from the vendor-supplied JSON had the right Shift, Alt and Ctrl keys mapped to the left side modifier keycodes. * id80: Remove empty row 6 (F0) from matrix The matrix layout which was defined in the vendor-supplied ID80.json file had 12 rows which corresponded to the left and right parts of the 6 physical rows. However, the row 6 of the matrix (connected to the F0 pin), which corresponded to the right part of the physical bottom row, was completely empty (all 9 keys of the bottom row were placed in the matrix row for the left part). Keeping this row in the matrix just wastes resources; in particular, when the VIA support is enabled, having a 9×12 matrix with 4 layers leaves only 122 bytes available for dynamic macros, which is less than the recommended minimum of 128 bytes. Removing the unused row reduces the matrix size to 9×11, which leaves 194 bytes of EEPROM space for dynamic macros. * id80: Update row numbers in the LAYOUT macro Update row numbers in the names of the LAYOUT macro parameters after removing a row in the middle. * id80: Set RGBLED_NUM to 20 to match the actual PCB The vendor-supplied ID80.json file specified that the PCB should have 28 RGB LEDs in the chain. However, the actual PCB that was shipped from AliExpress had 20 LEDs in the chain (16 underglow LEDs, and then 4 more LEDs on top of the PCB, to the right of the Enter key location). Update RGBLED_NUM to match the actual PCB.
* Add support for hardware and board initialisation overrides. * qmk cformat. * Add some documentation. * Docs clarity. * Make early_hardware_init_pre a no-op for now, until migrations occur. * Doco update * Make distinction between keyboard and ChibiOS board in docs * Doc anchors. * Update tmk_core/protocol/chibios/main.c Co-Authored-By: Joel Challis <[email protected]> * Rework bootloader entry to be off by default, allow opting-in. Co-authored-by: Joel Challis <[email protected]>
* porting the niu_mini to via * Wrong values in mk * Updating to unique Vendor ID and Product ID * Addressing zvecr comments * Addressing fauxpark comments Co-Authored-By: Ryan <[email protected]> Co-authored-by: Lauren Harris <[email protected]> Co-authored-by: Ryan <[email protected]>
* some via cleanups for the dp60 firmware * update matrix size
Signed-off-by: Joshua Rubin <[email protected]>
* Add a simple custom keymap for Gergo. * update readme, keymap cleanup
* add VIA enabled keymap with some layers taken out for space * get a more sane VID and PID so we don't collide with the other BMC powered boards * small cleanups * Update keyboards/tgr/jane/keymaps/via/keymap.c Co-Authored-By: Ryan <[email protected]> * add tkl_ansi_tsangan LAYOUT * add tkl_iso_tsangan LAYOUT Co-authored-by: Ryan <[email protected]>
* Copy back old files from 9 months ago * Delete unnecessary functions in lb75.c * Remove LCD and MIDI config * Modernize ancient files * Update keymaps as necessary * Move files to vendor folder * Update readme to reflect changes * Modernize makefile * Remove split config * Update keyboards/quad_h/lb75/keymaps/continuous_fnrow/keymap.c * Update keyboards/quad_h/lb75/keymaps/via/keymap.c * Update keyboards/quad_h/lb75/keymaps/divided_fnrow/keymap.c * Update keyboards/quad_h/lb75/lb75.c * Update lb75.c * Update keyboards/quad_h/lb75/keymaps/continuous_fnrow/keymap.c * Update keyboards/quad_h/lb75/readme.md * Update keyboards/quad_h/lb75/keymaps/via/keymap.c * Update keyboards/quad_h/lb75/keymaps/continuous_fnrow/keymap.c * Update keyboards/quad_h/lb75/keymaps/divided_fnrow/keymap.c * Update keyboards/quad_h/lb75/keymaps/divided_fnrow/keymap.c * Update keyboards/quad_h/lb75/keymaps/via/keymap.c * Add default keymap as required * Update keyboards/quad_h/lb75/info.json * Update keyboards/quad_h/lb75/info.json * Update keyboards/quad_h/lb75/readme.md * Update keyboards/quad_h/lb75/readme.md
* Keyboard: add treeadstone48 * rename layout defines * Use of pragma once * move common include code * fixed info.json * change keymap layout from kc to normal * fix alpha revision keymap * fixed info.json * remove USE_Link_Time_Optimization * Add keyboard firmware of treadstone32lite * fixed by the review * I used to set this to a per-keymap setting, so I'll undo it.
* Add VIA support * Update readme.md * Update readme.md * Update keyboards/tgr/910/readme.md * Update keyboards/tgr/910/readme.md * Update keyboards/tgr/910/readme.md
* add new keyboard * clean up * Update rules.mk * Update rules.mk * update Co-authored-by: vuhopkep <[email protected]>
* Keyboard: add treeadstone48 * rename layout defines * Use of pragma once * move common include code * fixed info.json * change keymap layout from kc to normal * fix alpha revision keymap * fixed info.json * remove USE_Link_Time_Optimization * Add keyboard firmware of treadstone48 rev.2 * move the rev1-supported keymap. * layout code was updated by review * remove comment bar * remove LTO ifded * Update keyboards/treadstone48/rev2/rev2.h * Update keyboards/treadstone48/rev2/rev2.h
* add new keyboard hannah60rgb * delete line * Delete config.h * Update hannah60rgb.c * Update hannah60rgb.c * update * Update hannah60rgb.c * update Co-authored-by: vuhopkep <[email protected]>
* Added ek87 support * Fixed readme * Update keyboards/eniigmakeyboards/ek87/rules.mk * Update keyboards/eniigmakeyboards/ek87/config.h * Update keyboards/eniigmakeyboards/ek87/ek87.c * fixed title * Deleted old files * Added rules.mk file to VIA keymap folder * Update keyboards/eniigmakeyboards/ek87/keymaps/default/keymap.c * Update keyboards/eniigmakeyboards/ek87/keymaps/via/keymap.c * Update keyboards/eniigmakeyboards/ek87/rules.mk * Deleted requested file * Removed VIA line from rules * Update keyboards/eniigmakeyboards/ek87/readme.md * Update keyboards/eniigmakeyboards/ek87/ek87.h * Update keyboards/eniigmakeyboards/ek87/ek87.h * Update keyboards/eniigmakeyboards/ek87/info.json * Update keyboards/eniigmakeyboards/ek87/keymaps/default/keymap.c * Update keyboards/eniigmakeyboards/ek87/keymaps/via/keymap.c * Renamed layouts and removed obsolete ones * Update keyboards/eniigmakeyboards/ek87/rules.mk * Update keyboards/eniigmakeyboards/ek87/rules.mk * Update keyboards/eniigmakeyboards/ek87/ek87.h * Update keyboards/eniigmakeyboards/ek87/ek87.h * Update keyboards/eniigmakeyboards/ek87/info.json * Update keyboards/eniigmakeyboards/ek87/info.json * Update keyboards/eniigmakeyboards/ek87/info.json * Update keyboards/eniigmakeyboards/ek87/info.json * Update keyboards/eniigmakeyboards/ek87/info.json * Update keyboards/eniigmakeyboards/ek87/info.json * Update keyboards/eniigmakeyboards/ek87/info.json
* Initial * update json, added basic oled config, updated matrix to correct rotary location * disable oled by default * Tuned oled for release * Completed OLED function implementation Correct spelling error in readme * Fixed image in readme * Should not be in this branch * Incorporating recommended changes by zvecr * Update keyboards/le_chiffre/info.json Co-authored-by: James Young <[email protected]> * Update keyboards/le_chiffre/readme.md Co-authored-by: James Young <[email protected]> Co-authored-by: James Young <[email protected]>
* Add TENKI keyboard Add TENKI keyboard, default keymap and via keymap * Minor Update Readme.md Change description of hardware supported * change layout name change layout name from ortho_20 to ortho_5x4 * Fix invalid format in info.json Fix invalid format in info.json * Fix invalid format * Fix formatting Fix formatting tenki.h * Fix formatting in keymap.c Fix formatting in keymap.c * Add new line at EOF info.json Add new line at EOF * Fix formatting * Fix formatting * Update rules.mk Fix Formatting
* Add support for the Shambles TKL * Fix Shambles files * Add files via upload * Fix Shambles again * Delete shambles.h.h * Delete shambles.c.c * Add files via upload * Delete Makefile * Apply suggestions from code review * Fix default layout to work with review * Apply suggestions from code review * Add info files * Update readme.md * Update keyboards/shambles/readme.md
* initial user directory * fix missing endif in vi mode * fix includes per drashna and a few typos. I have not tested the userspace keymap, it is just there to help keep the user space and keymap in sync * move babblepaste docs to md format * clean up block quotes * TIL clang-format - miles2go userspace
* [Keyboard] Added D48 keyboard. * Updated README. * Cleanups. * Moved d48 to handwired/ * Added link to build process album. * Coding conventions cleanups. * Added DS1307 RTC! * Minor cleanups. * Apply suggestions from code review Co-Authored-By: Drashna Jaelre <[email protected]> * Minor refactoring. * Readme fix. * Moved leftover keymap-specific code from keyboard space into keymap. * Added encoder button pins to extra matrix row. * Updated README, updated pinout & cleaned up the glcdfont * Apply suggestions from code review Co-Authored-By: Drashna Jaelre <[email protected]> * Update config.h * Apply suggestions from code review Co-Authored-By: Ryan <[email protected]> * Added default keymap. Refactored existing keymap. * Update keyboards/handwired/d48/README.md Co-Authored-By: Ryan <[email protected]> * Apply suggestions from code review Co-Authored-By: Joel Challis <[email protected]> * Minor alignment fix. * Update keyboards/handwired/d48/glcdfont_d48.c Co-Authored-By: Ryan <[email protected]> * Changes as per PR. * Apply suggestions from code review Co-authored-by: James Young <[email protected]> Co-authored-by: Drashna Jaelre <[email protected]> Co-authored-by: Ryan <[email protected]> Co-authored-by: Joel Challis <[email protected]> Co-authored-by: James Young <[email protected]>
…k#8674) * Invert UC_MOD/UC_RMOD direction when Shift is held Also use MOD_MASK_SHIFT in process_rgb.c * Allow audio to be played for UC_MOD, UC_RMOD keycodes as well * Fix signedness bug in reverse input mode cycling * Misc formatting in process_unicode_common.c * Address clang-format issues * Make decode_utf8 helper function file-local (static)
* Implement momentarily blink of lighting layers * Refactor spidey3 userspace to use rgb layer blink * Remove un-necessary line from example in documentation * Revert "Refactor spidey3 userspace to use rgb layer blink" This reverts commit 831649b. * Adds a missing bit of documentation about lighting layer blink * Update docs/feature_rgblight.md per suggestions Co-authored-by: James Young <[email protected]> * Update docs/feature_rgblight.md per suggestions Co-authored-by: James Young <[email protected]> * Update docs/feature_rgblight.md per suggestions Co-authored-by: James Young <[email protected]> * cformat, as suggested Co-authored-by: James Young <[email protected]>
* Add twinkle RGB Lighting effect * 2nd twinkle algo - double-buffering * Further refinement: Per-LED twinkle * Add documentation for Twinkle RBG Lighting mode * Bias twinkle saturation closer to the set value * Fix whitespace
* add adelais PCB * clean up * merger * update * Update readme.md * Update config.h * update * update * move keymap folder * Update info.json * Update info.json * Update info.json Co-authored-by: vuhopkep <[email protected]>
* create chidori/oled_sample keymap * Implement OLED enabled keymap * Update readme.md * Update keyboards/chidori/keymaps/oled_sample/keymap.c * Update keyboards/chidori/keymaps/oled_sample/keymap.c * delete chidori:oled_sample/config.h * use oled_write_ln_P to print layer state * delete unnecessary include * merge nested switches in oled_write_layer_state()
The referenced site was moved.
* Updated with my super16 version for my keypad * Added my folder to super16 * Set max LED brightness to 50% * Added custom keycodes for enter/shift+enter and copy/paste on one key * Fixed the boot up layer color * Renamed folder * Revert changes to root super16 files * Update keymap config.h and rules.mk files * Restore deleted 15game keymap files * Corrected the hold keycode for CCCV * Removed unnecessary comments * Update keyboards/1upkeyboards/super16/keymaps/nblyumberg/keymap.c Co-Authored-By: ridingqwerty <[email protected]> * Update keyboards/1upkeyboards/super16/keymaps/nblyumberg/config.h Co-Authored-By: ridingqwerty <[email protected]> * Update keyboards/1upkeyboards/super16/keymaps/nblyumberg/keymap.c Co-Authored-By: ridingqwerty <[email protected]> * Rewriting the layer color functionality * Revisions * Fixed the layer switching * Fixed the default layer color problem * Added a function suggested by Drashna but it won't compile * Cleaned up the code for PR * Removed unnecessary define for layer colors Co-authored-by: ridingqwerty <[email protected]>
Also reorder functions
13 tasks
vomindoraan
changed the title
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Merge latest master, fix conflict, update
register_unicode()function, use it insend_unicode_string().See qmk#8770 (review)