Merge with op-develop #72
Merged
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
* op-supervisor: cleanup cross-L2 safety types * op-node: fix interop test
* fix: Update absolute prestate * fix: just pre-pr * fix: absolute prestate updated as part of assertions. * chore: semver lock --------- Co-authored-by: Matt Solomon <[email protected]>
* ci: Add Cannon STF verify recurring job * setup remote docker * change make dir * fix cwd
* Accept /put path as described in spec In addition to the currently used `/put/` path to ease the migration. See ethereum-optimism#11499. * alt-DA: write to /put path as described in spec The spec mandates using `/put` and not `/put/`, so that is what we should do. Warning: This will break DA solutions that only accept `/put/` at the moment. It is recommended that DA solutions support both paths for a while, so that updating OP-stack can happen independently of the exact DA implementation version. Closes ethereum-optimism#11499.
Certain constructor parameters were not being inserted correctly. Although this didn't cause a failure during deployment, it did cause Kontrol tests to fail.
The devnet tests aren't providing a lot of value. They use our outdated Python devnet tooling, and only run a tiny subset of our overall test suite. They are also are flaky and slow to run. To prioritize improving the DevX of the monorepo, this PR removes the devnet tests from CCI.
Adds a few remaining interfaces required before we can migrate OPCM to use interfaces over source contracts.
…ism#12069) * op-node/rollup/derive: Implement Holocene Frame Queue * add FrameQueue test * use non-nil context * address reviews, refactor frame loading and pruning
The build fails when jq is not installed with a mysterious error message, so improve the error message. This will help debugging for new contributors.
) * Cleanups for production, add standard addresses This PR: - Cleans up the intent file to be more suitable for production deployments - Fixes various bugs encountered while preparing `op-deployer` for use against predeployed OPCM contracts - Adds a new CLI command to bootstrap a new OPCM deployment against an existing set of implementation contracts Note on Solidity changes: - Since the code for custom gas tokens is in the monorepo but isn't included in an official contracts release yet, we had to add interfaces for the pre-CGT contracts to the Solidity codebase. - The `DeployImplementations` script looks at the release identifier to determine whether or not it should use the pre- or post-CGT interfaces. * goimports * lints * fix tests * revert tx manger changes * Update packages/contracts-bedrock/src/L1/interfaces/IL1StandardBridgeV160.sol Co-authored-by: Maurelian <[email protected]> * Update packages/contracts-bedrock/src/L1/interfaces/IL1CrossDomainMessengerV160.sol Co-authored-by: Maurelian <[email protected]> * use new opcm * fix test * semver * semver * bump semver * update manager deployment * natspec * SEMVER --------- Co-authored-by: Maurelian <[email protected]>
* fixes * op-supervisor: head db init fix, logging, op-node debug logging * interop: track recent safety data * Early integration and refactor of Views and SafetyIndex * update for rebase * rename RecentSafetyIndex ; reorganize * refactor Pointer method on iterator * logging * Delete unused Tracking Code ; New ChainsDB.Safest * fix naming miss * fix mistaken line deletion * Update op-supervisor/supervisor/backend/safety/safety.go Co-authored-by: protolambda <[email protected]> * Add issue numbers to TODO ; Address Proto Comments --------- Co-authored-by: protolambda <[email protected]>
…um-optimism#12182) * add missing assertion and remove unneeded todo comments * chore: semver lock + pre-pr-no-build * chore: rename function
We no longer need these interfaces now that we have the actual interfaces.
* Updates to OPCM and OPCMInterop * Update DeployImpls and OPCM Tests * remove some unused imports * Undo mapping type change * Undo DeployOutput type change * Semver and snapshots
* feat: Rewrite natspec checker in Go Rewrites the `semver-natspec-check-no-build` Just command in Go to reduce runtime. This PR reduces runtime for this check from ~1m30s to about 3 seconds post-compilation. * remove old script * add unit tests * rename test * review updates
…thereum-optimism#12201) Trying to reproduce the missing prestate failure. Also now runs hourly instead of 4 hourly to increase chances of finding a failing case.
…eum-optimism#12116) * test: Transfer to finalSystemOwner rather than SystemOwnerSafe * feat: Fix comment references to ProxyAdmin
Fixes an annoying bug inside of make-summary-deployment that only became apparent with a recent commit that caused state diffs to start to appear under the address of Deploy.s.sol.
Kontrol profile was originally just looking at the L1 contracts which caused issues now that we're deploying via vm.getCode.
* cannon: Support F_GETFD cmd to fcntl. * cannon: Update fuzz test expectations. * cannon: Update MIPS.t.sol * cannon: Introduce a new state version for supporting get_fd. Switches singlethreaded prestate to use .bin.gz instead of json since it now needs to detect the new state version. * cannon: Don't override the cannon version. * Update semver-lock. * cannon: Update tests to detect old versions but only check writing and parsing for the currently supported versions. * cannon: Load old version from cannon docker image * cannon: Improve logging. * cannon: Restore cannon version arg. * Fix contrac semvers. * cannon: Rename singlethreaded-getfd to just singlethreaded-2. We could just go to using the state version number directly, but particularly the difference between singlethreaded and multithreaded feels useful to keep. * cannon: Fix comment. * Update semver again.
* contracts-bedrock: bump forge-std Bumps forge-std to the latest release https://github.com/foundry-rs/forge-std/tree/v1.9.3 This will help us to delete some solidity code and move to using cheatcodes in its place. * build: fix * gas-snapshot: update
* ci: Cannon v2 STF verify * ci: remove op-e2e-cannon-tests dep
…thereum-optimism#12130) * test(deploy): Deploy a distinct ProxyAdmin for Superchain contracts * fix: only set address manager for OP Chain's ProxyAdmin * fix: typo * test: fix create2 collision between ProxyAdmins * fix: lint * fix: move setupOpChainAdmin() before setupOpAltDA The DA challenge contract needs a proxy admin too * feat: use create2AndSave for ProxyAdmin * fix: Do not double save the superchain ProxyAdmin * Fix whitespace Co-authored-by: Matt Solomon <[email protected]> --------- Co-authored-by: Matt Solomon <[email protected]>
Signed-off-by: Chen Kai <[email protected]>
Refactors the op-service/client package a fair bit to ensure config options are more consistently applied.
…rc20 implementation (ethereum-optimism#12476) * feat: add superchain erc20 bridge (#61) * feat: add superchain erc20 bridge * fix: interfaces and versions * refactor: optimism superchain erc20 redesign (#62) * refactor: use oz upgradeable erc20 as dependency * chore: update interfaces * fix: tests based on changes * refactor: remove op as dependency * feat: add check for supererc20 bridge on modifier * chore: update tests and interfaces * chore: update stack vars name on test * chore: remove empty gitmodules file * chore: update superchain weth errors * test: add superchain erc20 bridge tests (#65) * test: add superchain erc20 bridge tests * test: add optimism superchain erc20 beacon tests * test: remove unnecessary test * test: tests fixes * test: tests fixes * chore: update missing bridge on natspec (#69) * chore: update missing bridge on natspec * fix: natspecs --------- Co-authored-by: agusduha <[email protected]> * fix: remove superchain erc20 base (#70) * refactor: update isuperchainweth (#71) --------- Co-authored-by: agusduha <[email protected]> * feat: rename mint/burn and add SuperchainERC20 (#74) * refactor: rename mint and burn functions on superchain erc20 * chore: rename optimism superchain erc20 to superchain erc20 * feat: create optimism superchain erc20 contract * chore: update natspec and errors * fix: superchain erc20 tests * refactor: make superchain erc20 abstract * refactor: move storage and erc20 metadata functions to implementation * chore: update interfaces * chore: update superchain erc20 events * fix: tests * fix: natspecs * fix: add semmver lock and snapshots * fix: remove unused imports * fix: natspecs --------- Co-authored-by: 0xDiscotech <[email protected]> * fix: refactor zero check (#76) * fix: pre pr * chore: add new solady version and import it for erc20 * fix: undo forge std changes * chore: re run pre pr script * fix: semver natspec check failure (#79) * fix: semver natspec check failure * fix: ignore mock contracts in semver natspec script * fix: error message * feat: add crosschain erc20 interface (#80) * feat: add crosschain erc20 interface * fix: refactor interfaces * fix: superchain bridge natspec (#83) * fix: superchain weth natspec (#84) Co-authored-by: 0xng <[email protected]> Co-authored-by: 0xParticle <[email protected]> Co-authored-by: gotzenx <[email protected]> * fix: stop inheriting superchain interfaces (#85) * fix: stop inheriting superchain interfaces * fix: move events and erros into the implementation * fix: make superchainERC20 inherits from crosschainERC20 * fix: superchain bridge rename (#86) * fix: fee vault compiler error (#87) * fix: remove unused imports * chore: run pre-pr and update vendor interface * fix: refactor common errors (#90) * fix: refactor common errors * fix: remove unused version * feat: add permit2 on optimism superchain erc20 * chore: run pre-pr script * fix: reuse unauthorized error (#92) * fix: superchain erc20 factory conflicts * fix: rename crosschain functions (#94) * chore: run pre-pr * chore: run pre-pr * chore: run pre-pr * feat: add new tests on optimism superchain erc20 * fix: vars and params naming on newly added tests * fix: var name * feat: support permit2 on optimism superchain erc20 and upgrade solady's erc20 implementation (#97) --- Co-Authored-by: AgusDuha <[email protected]> * chore: use ierc20 alias for ierc20 solady interface (#108) --------- Co-authored-by: AgusDuha <[email protected]> Co-authored-by: agusduha <[email protected]> Co-authored-by: 0xng <[email protected]> Co-authored-by: 0xParticle <[email protected]> Co-authored-by: gotzenx <[email protected]>
…#12577) * op-deployer: Add support for inspecting l2 semvers * goimports * add factory targets
* op-deployer: Add support for inspecting l2 semvers * goimports * add factory targets * op-service: Add omitempty to EIP1559Params These parameters are only valid for Holocene, and cause errors during unmarshaling on older op-node versions.
… tags (ethereum-optimism#12538) Generates a versions.json to record which prestate came from each tag and compares it to the releases.json. Adds a couple of releases missed from releases.json and removes governanceApproved from some releases which were not deployed to op-mainnet or submitted to governance.
…mism#12585) Kona changed the default log level so the -v is undesirable now.
…ism#12587) Update op-challenger to latest develop
* op-chain-ops: Marshal withdrawalnetwork as int * fix test * lint * fix other test * swap networks
…imism#12589) Cleans up some things to enable Superchain Registry validation: - Removes the foundry deployer address used by L2Genesis.sol from the outputted allocs file. - Removes storage slots with zero values from any state dump.
Adds rule tests for all semgrep rules and fixes a few bugs that were found during testing. Moves semgrep rules into the semgrep folder without the . prefix because the prefix caused semgrep to be unable to run the tests.
* small fix * Change version and hash
qzhodl
approved these changes
Oct 24, 2024
blockchaindevsh
approved these changes
Oct 28, 2024
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
git mergewith 5ecd2dbBe ready for devnet and FP testing