WipperSnapper 1.0.0-beta.95

WipperSnapper 1.0.0-beta.95

Installing WipperSnapper

Follow this learning system guide to learn how to install WipperSnapper on your board.

Upgrade a device running WipperSnapper

Locate the device you want to upgrade on io.adafruit.com/devices. Then, click "Update".

What's Changed

Features

Just in case you missed it, we've added support for specifying more than one WiFi Network in your secrets file.

See this Adafruit-Playground note for details.

New Components 🆕🆕🆕

You can use your Adafruit SEN54 or SEN55 Adapter Breakout - STEMMA QT / Qwiic 🛒 and JST-GHR 6pin cable to connect to the brand new Sensirion SEN6x Family of Air Quality Sensors (Supports SEN60, SEN63C, SEN65, SEN66, SEN68).
Pickup an evaluation kit for the SEN66 from Digikey (or preorder the raw sensor units).

• add sen6x, derived from sen5x driver by @MartinEbnerSensirion in #675

Fixes

• Fixed SEN66 CO2 overflow by @tyeth in #681

Tooling

• Delete unused boards by @tyeth in #680

New Contributors

• @MartinEbnerSensirion made their first contribution in #675

Full Changelog: 1.0.0-beta.94...1.0.0-beta.95

WipperSnapper 1.0.0-beta.94

WipperSnapper 1.0.0-beta.94

Installing WipperSnapper

Follow this learning system guide to learn how to install WipperSnapper on your board.

Upgrade a device running WipperSnapper

Locate the device you want to upgrade on io.adafruit.com/devices. Then, click "Update".

What's Changed

Features

Just in case you missed it, we've added support for specifying more than one WiFi Network in your secrets file.

See this Adafruit-Playground note for details.

New Board Added 🆕🆕🆕 - Raspberry Pi RP2350 Pico 2W 🛒

• Pico2w by @tyeth in #664

New Components

• Add VCNL4200 by @tyeth in #673

Fixes

• bme68x pressure units by @mikeysklar in #665
• Update ConfigJson.cpp - set default password to blank and ssid to unset-ssid by @tyeth in #662
• Fix USB-MSC not re-attaching by @brentru in #667
• Stop blinding status lights by @tyeth in #668
• RP2040 WDT=8.3secs - enable after wifi connect by @tyeth in #670
• USB Reattach fixes + Specify reset time remaining + secrets != 0xFF by @tyeth in #672
• Always print scanned wifi networks by @tyeth in #661

Tooling

• Check NanoPB failures and restore cache if needed by @tyeth in #674

New Contributors

• @mikeysklar made their first contribution in #665

Full Changelog: 1.0.0-beta.93...1.0.0-beta.94

WipperSnapper 1.0.0-beta.93

WipperSnapper 1.0.0-beta.93

Installing WipperSnapper

Follow this learning system guide to learn how to install WipperSnapper on your board.

Upgrade a device running WipperSnapper

Locate the device you want to upgrade on io.adafruit.com/devices. Then, click "Update".

What's Changed

Features

Just in case you missed it, we've added support for specifying more than one WiFi Network in your secrets file.

See this Adafruit-Playground note for details.

New Board Added 🆕🆕🆕 - Adafruit Metro ESP32-S3 🛒

• Add metro s3 by @tyeth in #647

New Components

• Added aht21 sensor to the drivers by @thussaiththelaw in #660

Fixes

• Use analogReadMilliVolts for esp32 and update hysteresis by @tyeth in #635
• Reduce connection errors on QT Py ESP32-Sx due to 3D Antennas by @brentru in #654

Tooling

• Add caching for nanopb by @tyeth in #652

New Contributors

• @thussaiththelaw made their first contribution in #660

Full Changelog: 1.0.0-beta.92...1.0.0-beta.93

WipperSnapper 1.0.0-beta.92

WipperSnapper 1.0.0-beta.92

Installing WipperSnapper

Follow this learning system guide to learn how to install WipperSnapper on your board.

Upgrade a device running WipperSnapper

Locate the device you want to upgrade on io.adafruit.com/devices. Then, click "Update".

What's Changed

Boards

• A bug has been fixed with the Adafruit Feather ESP32-C6 build (#636). This firmware version works with ESP32-C6.

Tooling

• Fix C6 Build by @brentru in #651
• Update E5 cert for staging by @tyeth in #649
• Update release task to use nested build-files assets by @tyeth in #648

Full Changelog: 1.0.0-beta.91...1.0.0-beta.92

WipperSnapper 1.0.0-beta.91

WipperSnapper 1.0.0-beta.91

Installing WipperSnapper

Follow this learning system guide to learn how to install WipperSnapper on your board.

Upgrade a device running WipperSnapper

Locate the device you want to upgrade on io.adafruit.com/devices. Then, click "Update".

What's Changed

Warning: Adafruit Feather ESP32-C6 has a problem in this release, which will be resolved soon (in the next release).

New Component Added - Adafruit HDC3021 and HDC3022 🌡️

The Adafruit HDC3022 Precision Temperature & Humidity Sensor breakout 🛒 features the highest accuracy & precision we’ve see so far! It has the TI HDC302x series chip with typical 0.5% accuracy for the RH sensor (with 0.19% long-term drift) and ±0.1°C typical accuracy for the temperature sensor

• Add HDC3021/HDC302x by @tyeth in #623

Fixes

The FunHouse had a problem causing it to reboot repeatedly, which should now be resolved in this release.

• fix funhouse build checking paths by @tyeth in #634
• Add retry if data not ready for SCD30 by @tyeth in #632
• Adjust SGP30 init to not call IAQinit unnecessarily by @tyeth in #600

Tooling changes

• Update build action to build on adafruit/ci-arduino's new wippersnapper branch by @brentru in #633
• Add merge to fix upload download artifact v4 by @tyeth in #642
• Update Depreciated Workflow Action by @brentru in #631
• 598 preprocessor script for printing the library versions to boot outtxt by @tyeth in #607
• New pio build targets by @tyeth in #643
• Set debug build of s3-rev-tft to no_ota by @tyeth in #645
• Add skips + generates for S3 Rev TFT debug by @tyeth in #646

Full Changelog: 1.0.0-beta.90...1.0.0-beta.91

WipperSnapper 1.0.0-beta.90

What's Changed

• Fixes WiFi Scan bootloop caused by Beta 89 (see: #628) by @brentru in #629

Full Changelog: 1.0.0-beta.89...1.0.0-beta.90

WipperSnapper 1.0.0-beta.89

Installing WipperSnapper

Follow this learning system guide to learn how to install WipperSnapper on your board.

Upgrade a device running WipperSnapper

Locate the device you want to upgrade on io.adafruit.com/devices. Then, click "Update".

What's Changed

Fixes

• Fix TinyUSB Enumeration bug on ESP32-S3 by @brentru in #625
• Fix version to Beta 89 by @brentru in #626

Full Changelog: 1.0.0-alpha.89...1.0.0-beta.89

Adafruit WipperSnapper 1.0.0-alpha.89

Installing WipperSnapper

Follow this learning system guide to learn how to install WipperSnapper on your board.

Upgrade a device running WipperSnapper

Locate the device you want to upgrade on io.adafruit.com/devices. Then, click "Update".

What's Changed

Features

Just in case you missed it, we've added support for specifying more than one WiFi Network in your secrets file.

See this Adafruit-Playground note for details.

🆕🆕🆕 New Board Added - Adafruit Feather ESP32-C6 🛒

• Add Adafruit Feather ESP32-C6 by @tyeth in #615

Fixes

• Add a bit of logging to analogIO + fix PicoW by @tyeth in #610

Tooling

• Print ESP-IDF and arduino-esp32 core versions to the boot file by @brentru in #614

Full Changelog: 1.0.0-beta.88...1.0.0-alpha.89

Adafruit WipperSnapper 1.0.0-beta.88

Installing WipperSnapper

Follow this learning system guide to learn how to install WipperSnapper on your board.

Upgrade a device running WipperSnapper

Locate the device you want to upgrade on io.adafruit.com/devices. Then, click "Update".

What's Changed

Features

Just in case you missed it yesterday, we've added support for specifying more than one WiFi Network in your secrets file.

See this Adafruit-Playground note for details.

Tooling

A lot of additional logging, and reconnection improvements including checking the MQTT ping response (for "stale" connections).

• Updates for the ESP32 network interface by @brentru in #606
• Pb error msgs by @tyeth in #584
• Reset wifi coprocessor on disconnect by @tyeth in #590
• Add RSSI Logging by @tyeth in #589

Full Changelog: 1.0.0-beta.87...1.0.0-beta.88

Adafruit WipperSnapper 1.0.0-beta.87

Installing WipperSnapper

Follow this learning system guide to learn how to install WipperSnapper on your board.

Upgrade a device running WipperSnapper

Locate the device you want to upgrade on io.adafruit.com/devices. Then, click "Update".

What's Changed

Features

• Adds WiFi Multi-Network support for ESP32, ESP8266 and Raspberry Pi Pico W by @tyeth in #601

New Sensors

• Adds support for Adafruit DS2484 I2C to 1-Wire Bus Adapter Breakout
  by @tyeth in #603

Tooling

• Adds a local build environment for arduino-esp32 bsp 3.0.3 and PIO by @brentru in #605

Full Changelog: 1.0.0-beta.86...1.0.0-beta.87