pull from master #1
Merged
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Fixes the handling for the oneshot cleanup, so it only cleans up if it is active. It should not cleanup of SHO is off (eg using a normal oneshot key), nor if it's actively pressed or used. Previous behavior BROKE swap hand key.
* creOnic added * made requested changed by a moderator * device name changed * fixed flatbread60 files * add vaneela and vaneelaEX support * Update keyboards/nckiibs/vaneelaex/rules.mk * vaneela rgb disabled * include error fxied * vaneelaex Via keymap fixed * vaneelaex keymap fixed * all fixed except clang part * vaneelaex config.h error fixed, clang fixed * Update keyboards/nckiibs/flatbread60/keymaps/default/keymap.c * Update keyboards/nckiibs/flatbread60/keymaps/default/keymap.c done * Update keyboards/nckiibs/flatbread60/keymaps/default/keymap.c done * Update keyboards/nckiibs/flatbread60/keymaps/default/keymap.c done * Update keyboards/nckiibs/flatbread60/keymaps/default/keymap.c done * Update keyboards/nckiibs/flatbread60/keymaps/default/keymap.c * Update keyboards/nckiibs/flatbread60/keymaps/default/keymap.c * Update keyboards/nckiibs/flatbread60/keymaps/default/keymap.c * Update keyboards/nckiibs/flatbread60/keymaps/default/keymap.c * Update keyboards/nckiibs/flatbread60/keymaps/default/keymap.c * Update keyboards/nckiibs/flatbread60/rules.mk done * line endings were fixed as requested * Apply suggestions from code review Thank you! * requests applied and rebased * pics changed * flatbread via fixed * Apply suggestions from code review Thanks! * Apply suggestions from code review Done! * Apply suggestions from code review except VIA keymaps Questions regarding VIA keymaps are pending * Update keyboards/nckiibs/flatbread60/keymaps/default/keymap.c * flatbread via keymap changed * Apply suggestions from code review
Co-authored-by: Swiftrax <[email protected]>
* ext65rev2 initial * open drain change and config * pwm * pwm streams * spi * ws2812 spi * oled * enable sleep * keymap and dissable oled * readd oleds * nooled * led_update_kb revised * update and remove board specific files and add to ext65rev2.c * Update OLED usb status * Update keyboards led state * Layer state set kb * Return state * Update keyboards led state * Update OLED usb status * merge master and merge rev folders * add readme * move board_init to only if OLED is enabled * update readme * update rules.mk * Remove OLED from rules.mk * Update config.h * show AEBoards * Update keyboards/aeboards/ext65/rev2/rules.mk
* DZ60RGB V1 - Add personal configuration (cherry picked from commit 313ce586e998f5604ed1b559bbe90de381f0b782) * [Keymap] Didel - Add license headers * [Keymap] Didel - Reformat Keymap * [Keymap] Didel - Add named layers
* the `layout`s in `info.json` should actually reflects the `layout`s macros in the `rev1/rev1.h`. * fixed complicated's thumb keys.
* Add indicator LEDs for GHS.RAR * Update keyboards/ghs/rar/rar.c Co-authored-by: Joel Challis <[email protected]> Co-authored-by: Joel Challis <[email protected]>
Specifically, don't want to have both RGBLight and RGB Matrix (with WS2812) enabled at the same time. This will cause issues in usage, but apparently not when compiling. Additionally, the led matrix was not encapsulated with preprocessor code.
* ai03 Soyuz ## Description @ai03-2725 Soyuz: 1. Update `soyuz.h` (Add `LAYOUT_5x4`) 2. Added `keymap.c` 3. Added `readme.md` * Update readme.md * Update readme.md * Update keymap.c * Update keymap.c * Update keymap.c * Update keymap.c * Update soyuz.h Co-authored-by: Joel Challis <[email protected]> * Update keyboards/ai03/soyuz/soyuz.h Co-authored-by: Joel Challis <[email protected]> * Update keyboards/ai03/soyuz/keymaps/mrsendyyk/keymap.c Co-authored-by: Joel Challis <[email protected]> * Update keyboards/ai03/soyuz/keymaps/mrsendyyk/keymap.c Co-authored-by: Joel Challis <[email protected]> * Update rules.mk * Update keymap.c * Update keymap.c * Update keymap.c * Update readme.md * Update rules.mk * Update soyuz.h * Update soyuz.h * Update * Rename readme.md to README.md * Update keymap.c * Rename README.md to readme.md Co-authored-by: Joel Challis <[email protected]>
* cleaning up * got some working bones * working pretty well * really livin' now * all done * copyright adjustments * default keymap * readme * no descrip * remove trailing slashes * remove blank line * remove trailing slashes * clean up readme * clean up rules spacing * bootloader spacing * made quick json from KLE converter * remove postageboard mini references * add actual manu and product values * add make example * rework * remove double bootload define * smoller image * liscensed * correct dimensions * dimensions
* [Keyboard] Kinesis + Pro Micro init - docs for DIY - custom matrix = lite - a near-factory dvorak mapping - optimized debouncing for lower latency * chore: reformatting * chore: update doc * chore: cleanups according to PR feedback * chore: PR feedback * fix: compile error * chore: add include * fix: LEDs hanging after USB disconnect * chore: enable QMK goodies by default * chore: use semantic write pin
* adding southpaw75 * Added readme.md for Southpaw75 * adding info.json * Update keyboards/southpaw75/rules.mk * Update keyboards/southpaw75/southpaw75.h * Update keyboards/southpaw75/keymaps/default/keymap.c * Update keyboards/southpaw75/config.h * Update keyboards/southpaw75/southpaw75.h * Update keyboards/southpaw75/keymaps/default/keymap.c * Update keyboards/southpaw75/rules.mk * Update keyboards/southpaw75/rules.mk * Update keyboards/southpaw75/config.h * Update keyboards/southpaw75/readme.md * Update keyboards/southpaw75/readme.md * Update config.h * Update keymap.c * Update readme.md * Update southpaw75.c * Update southpaw75.h
* Add GH80-3700 * Add via keymap * Update gh80_3700.h * Update config.h * LAYOUT_all -> LAYOUT_ortho_6x4 * Update readme.md
* start translation docs/ja/proton_c_conversion.md * Japanese translation is in progress. * Japanese translation is in progress. * update * Update docs/ja/proton_c_conversion.md * Update docs/ja/proton_c_conversion.md * Update docs/ja/proton_c_conversion.md * Update docs/ja/proton_c_conversion.md * Update docs/ja/proton_c_conversion.md * Update docs/ja/proton_c_conversion.md * Update docs/ja/proton_c_conversion.md * Update docs/ja/proton_c_conversion.md * Update docs/ja/proton_c_conversion.md * update docs/ja/_summary.md: GPIO congtrol
* move caps lock indicator position * use num lock and scroll lock as layer indicators
* Issue 9942: Add Quantum defines Add codes to quantum_keycodes for LSA, RSA, RCS, and their corresponding _T macros * 9942: Add documentation for new defines Add documentation for new defines in feature request 9942. Also define SAGR and SAGR_T as aliases for RSA and RSA_T. * Update quantum/quantum_keycodes.h * Update docs/keycodes.md * Update docs/keycodes.md * Update docs/keycodes.md * Update docs/keycodes.md
* swap git diff logic to github action * Print out layouts when linting
* Added wilba.tech WT65-XT, WT65-XTX * Review changes * Review changes
* move media keys in to move layer; rearragne f keys; use send_string for rev5 compatability * remove send_string workaround for #4072
* Add Squishy65 keyboard * Edit info.json * Fix incorrect ISO layout * Add missing license in files * Update keyboards/ramonimbao/squishy65/config.h Co-authored-by: Ryan <[email protected]> * Update keyboards/ramonimbao/squishy65/keymaps/via/rules.mk Co-authored-by: Ryan <[email protected]> * Update keyboards/ramonimbao/squishy65/rules.mk Co-authored-by: Ryan <[email protected]> Co-authored-by: Ryan <[email protected]>
* userspace: added nchristus * userspace: updates per PR review
* experiment with userspace * reorganise * readme * missing oneshot shift from ignored keys * recombine hands in layout macro
* via support * Removing backspaces from jj40 keymap.c * Updating jj40/via/rules.mk
* added SQUARE.X keyboard from the iNETT Studio * split to two sub directories * Apply suggestions from code review * Update keyboards/inett_studio/sqx/universal/universal.h * Apply suggestions from code review * update the matrix control keycodes settings * use the offical macro to the rgb matrix control * fixed led position issue * Apply suggestions from code review * removed the redundant #endif * update default keymap * Apply suggestions from code review * add license header
* Add ToyoshimaHidenori's keymap * Remove some dead code and characters * Change the folder name from uppercase to lowercase * Remove uppercase folder
Apply #10242 changes to ja/feature_split_keyboard.md
* Add via keymap for Plaid-Pad - Add VIA support for the Plaid-Pad - Changes Vendor ID and Product ID (to follow VIA's guidelines) * Add extra encoder pads for rev1.1 * Change Product Id from pp to PP (hex value) * improved readme - detailed informations about rotary encoder, bootloader and firmware * Improved encoder informations in via keymap * Improved encoder infos and code in default keymap * add revision folder for rev1 and rev1.1 * change encoder assignment for defaul a via keymap * Update keyboards/keycapsss/plaid_pad/config.h * change revision number * Update keyboards/keycapsss/plaid_pad/rules.mk * Update keyboards/keycapsss/plaid_pad/rules.mk * Update keyboards/keycapsss/plaid_pad/rules.mk * Update keyboards/keycapsss/plaid_pad/rules.mk * Update keyboards/keycapsss/plaid_pad/readme.md * add license to header of *.h and *.c files * remove the list of alternate bootloaders - due to the pr checklist * Update keyboards/keycapsss/plaid_pad/rules.mk
* added via keymap * replaced PRODUCT_ID 0x1157 with PRODUCT_ID 0x2157 replaced product id to distinguish rev2 from rev1. bakingpy gave me permission through discord chat. * Update keyboards/keebio/viterbi/keymaps/via/keymap.c * Update keyboards/keebio/viterbi/keymaps/via/rules.mk * made a simplier keymap.c for via folder Based from the default keymap, removed unnecessary codes.
* ADD BINEPAD/BN003 * Update keyboards/binepad/bn003/config.h * Update keyboards/binepad/bn003/config.h * Update keyboards/binepad/bn003/rules.mk * Update keyboards/binepad/bn003/keymaps/via/keymap.c * Update readme.md added macro pad info * Update keyboards/binepad/bn003/readme.md * Update keyboards/binepad/bn003/bn003.c * Update keyboards/binepad/bn003/config.h * Update keyboards/binepad/bn003/config.h * Update keyboards/binepad/bn003/info.json * Update keyboards/binepad/bn003/rules.mk * Update keyboards/binepad/bn003/rules.mk * Update keyboards/binepad/bn003/rules.mk * Update bn003.c * Update keyboards/binepad/bn003/readme.md * Update keyboards/binepad/bn003/rules.mk * Update keyboards/binepad/bn003/config.h * Update keyboards/binepad/bn003/keymaps/via/rules.mk * Update keyboards/binepad/bn003/rules.mk
.vscode/c_cpp_properies.json -> .vscode/c_cpp_properties.json
* setup keyboard * fit v1 board setting * remove unused def and add ergodox_pretty * add user hooks * add ergodox_pretty to info * apply suggestions * use default split usb timeout
* Hub16 AutoHotKey Companion * Revised after PR comments by Drashna * Update keyboards/hub16/keymaps/ahk_companion/readme.md Co-authored-by: James Young <[email protected]> * Update keyboards/hub16/keymaps/ahk_companion/readme.md Co-authored-by: James Young <[email protected]> * Update keyboards/hub16/keymaps/ahk_companion/readme.md Co-authored-by: James Young <[email protected]> * Update keyboards/hub16/keymaps/ahk_companion/readme.md Co-authored-by: James Young <[email protected]> * Update keyboards/hub16/keymaps/ahk_companion/readme.md Co-authored-by: James Young <[email protected]> * Update keyboards/hub16/keymaps/ahk_companion/keymap.c Co-authored-by: Drashna Jaelre <[email protected]> Co-authored-by: James Young <[email protected]> Co-authored-by: Drashna Jaelre <[email protected]>
* Update rev2.h * Update info.json * Create keymap.c * Add ISO layout to rev1 * Removed redundant keycount * Add fix for rev1 board + additional key * Updated default iso keymap * Add layout with 1.5u keys to the right of spacebar * Fixed rev2 rwkl and added default layout
* initial add * stoutgat working * Ready for release * Ready for release * Ready for release * Ready for release * Ready for release * fix typos * update flash instructions in readme * update copyright * Update keyboards/tkw/stoutgatv2/keymaps/default/keymap.c * Apply suggestions from code review * Fix typo * Update lib/vusb * Update keyboards/tkw/stoutgatv2/rules.mk * Update desc add v2 * Add ANSI * Move to v1 and v2 folders * fix typo * fix v1 readme * Fix copypasta from v1 keymap * fix missing trailing slash * Delete keymap.json * Apply suggestions from code review Fixed layout and removed erroneous keymap.json
* add error check * remove quotes * update error message Co-authored-by: Ryan <[email protected]> Co-authored-by: Ryan <[email protected]>
* add via support for boardsource/5x12 * make product id for 5x12 unique (there is already an 0x0512) by setting it to 0x5012 * un-swap the readme's for 3x4 and 5x12 * Update keyboards/boardsource/5x12/config.h update vendor id * Update keyboards/boardsource/5x12/keymaps/via/keymap.c use correct number of layers for VIA * update product id to use same pattern as others * Update keyboards/boardsource/5x12/keymaps/via/readme.md * Update keyboards/boardsource/5x12/keymaps/via/readme.md
* Badger keymaps * bug fix - linter * code review feedback and ortholinear bugs * cleanup * backing out suspect bug after doing additional research * code review feedback * code review feedback * changing default badger keymap and small bugfix
* [Keyboard] Convert Corne Keyboard to Split Common * Add VIA Support * Makes sure that ol(e)d and new OLED implementation can't coexist * Add licensing header to files * Add changes based on feedback from foostan * Fixes
* add tap_hold.md translation * update based on comment * update based on comment * update based on comment
* initial keymap commit * Keymap for coppertop commit * removed define for layers/kc_no/kc_trns * Modified keymap to remove definitions and add layer enum * initial keymap commit * Keymap for coppertop commit * removed define for layers/kc_no/kc_trns * Modified keymap to remove definitions and add layer enum * Changed KC_NO and KC_TRNS to 7X and 7_ * Fixed spacing on keymaps * TMO50: use layer_state_set_kb at keyboard level (#10150) * Change TMO to use layer_state_set_kb as is customary at the keyboard level. This also factors out `process_indicator_led` to a separate method. * [Keymap] update dz60:mrsendyyk (#10160) Update DZ60 Personal readme.md and keymap.c * Update readme.md * Update keymap.c * Update keymap.c * Update readme.md * Update readme.md * Update readme.md * Update keymap.c * Update readme.md * Update * Update readme.md * Update keymap.c * Update readme.md * [Keyboard] YMDK NP21 refactor (#10181) * [Keyboard] 1upkeyboards/1up60rgb: fix broken Enter (#10188) The recent change to unnest macros put the enter on the wrong matrix key. On the 1uprgb, the ANSI and ISO enters share the same cell as does the ANSI and ISO backslash. * no idea what this is * Update keyboards/dz60/keymaps/coppertop/keymap.c * Update keyboards/dz60/keymaps/coppertop/keymap.c * Update keyboards/dz60/keymaps/coppertop/keymap.c * Update keyboards/dz60/keymaps/spotpuff/keymap.c * Update keyboards/dz60/keymaps/spotpuff/keymap.c * Update keyboards/dz60/keymaps/spotpuff/keymap.c * Added Trns labels to keymap comments. * Revert "no idea what this is" This reverts commit dd950f9. * Reverted dd950f9 * fix vusb submodule * Update keyboards/dz60/keymaps/coppertop/rules.mk * Update keyboards/dz60/keymaps/spotpuff/rules.mk * Update users/spotpuff/rules.mk * Added GNU copyright license text
…TO_ENABLE is not (#10217) * Output an error message if LINK_TIME_OPTIMIZATION_ENABLE is set but LTO_ENABLE is not. * Update common.mk Specify that LINK_TIME_OPTIMZATION_ENABLE has been renamed, not deprecated.
nopunin10did
pushed a commit
that referenced
this pull request
Sep 28, 2022
* Userspace: muppetjones (#1) Add and update lily58 to work with userspace Add and update kyria keymap to work with userspace Add and update planck keymap with userspace Add etchamouse code and docs to userpace Add userspace Update mouse encoder for smoother movement. Encoder + mouse Added casemodes by andrewjrae * Rollback lily58 state reader and add missing GPL * Apply suggestions from code review Co-authored-by: Drashna Jaelre <[email protected]> Co-authored-by: Joel Challis <[email protected]> * fix lily58 keymap * Updates to user and lily for muppetjones. Updated parameters for etchamouse for smoother mouse movement. Updated lily keymap and userspace to actually work together. * Update keyboards/lily58/keymaps/muppetjones/config.h Co-authored-by: Drashna Jaelre <[email protected]> * Updated keymaps and userspace * Little more cleanup. * Update keyboards/lily58/keymaps/muppetjones/rules.mk Co-authored-by: Ryan <[email protected]> * Rollback accidental libchibios update * Apply suggestions from code review Co-authored-by: Drashna Jaelre <[email protected]> * Update kyria keymap * Move kyria keymap to splitkb/kyria * Update planck keymap * Remove all changes to keyboards/lily58/lib/layer_state_reader.c * Update lily58 keymap * Recommended change * Update keymap readme * Update kyria keymap and userspace * Apply suggestions from code review Co-authored-by: Drashna Jaelre <[email protected]> * Renamed users/muppetjones/README.md to lc * Update keyboards/lily58/keymaps/muppetjones/config.h Co-authored-by: Drashna Jaelre <[email protected]> Co-authored-by: Drashna Jaelre <[email protected]> Co-authored-by: Joel Challis <[email protected]> Co-authored-by: Ryan <[email protected]>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Description
Types of Changes
Issues Fixed or Closed by This PR
Checklist