Merging linux stable on branch android-q #8

radcolor · 2019-12-01T02:03:20Z

To 4.4.205 on branch android-q

…map() [ Upstream commit b97760ae8e3dc8bb91881c13425a0bff55f2bd85 ] Smatch complains about this condition: if (has_config && num_pins >= 1) The "has_config" variable is either uninitialized or true. The "num_pins" variable is unsigned and we verified that it is non-zero on the lines before so we know "num_pines >= 1" is true. Really, we could just check "num_configs" directly and remove the "has_config" variable. Fixes: 7761808 ("pinctrl: introduce driver for Atmel PIO4 controller") Signed-off-by: Dan Carpenter <[email protected]> Acked-by: Ludovic Desroches <[email protected]> Signed-off-by: Linus Walleij <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 9708d2b5b7c648e8e0a40d11e8cea12f6277f33c ] llc_sap_close() is called by llc_sap_put() which could be called in BH context in llc_rcv(). We can't block in BH. There is no reason to block it here, kfree_rcu() should be sufficient. Signed-off-by: Cong Wang <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 56d20861c027498b5a1112b4f9f05b56d906fdda ] Call Frame Information is used by gdb for back-traces and inserting breakpoints on function return for the "finish" command. This failed when inside __kernel_clock_gettime. More concerning than difficulty debugging is that CFI is also used by stack frame unwinding code to implement exceptions. If you have an app that needs to handle asynchronous exceptions for some reason, and you are unlucky enough to get one inside the VDSO time functions, your app will crash. What's wrong: There is control flow in __kernel_clock_gettime that reaches label 99 without saving lr in r12. CFI info however is interpreted by the unwinder without reference to control flow: It's a simple matter of "Execute all the CFI opcodes up to the current address". That means the unwinder thinks r12 contains the return address at label 99. Disabuse it of that notion by resetting CFI for the return address at label 99. Note that the ".cfi_restore lr" could have gone anywhere from the "mtlr r12" a few instructions earlier to the instruction at label 99. I put the CFI as late as possible, because in general that's best practice (and if possible grouped with other CFI in order to reduce the number of CFI opcodes executed when unwinding). Using r12 as the return address is perfectly fine after the "mtlr r12" since r12 on that code path still contains the return address. __get_datapage also has a CFI error. That function temporarily saves lr in r0, and reflects that fact with ".cfi_register lr,r0". A later use of r0 means the CFI at that point isn't correct, as r0 no longer contains the return address. Fix that too. Signed-off-by: Alan Modra <[email protected]> Tested-by: Reza Arbab <[email protected]> Signed-off-by: Paul Mackerras <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit cbbc488ed85061a765cf370c3e41f383c1e0add6 ] dtc has new checks for I2C buses. Fix the warnings in unit-addresses. arch/arm/boot/dts/socfpga_cyclone5_de0_sockit.dtb: Warning (i2c_bus_reg): /soc/i2c@ffc04000/adxl345@0: I2C bus unit address format error, expected "53" Signed-off-by: Rob Herring <[email protected]> Signed-off-by: Dinh Nguyen <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 0c3dfa176912b5f87732545598200fb55e9c1978 ] Sharing the same irqchip with multiple gpiochips is not a good practice. For instance, when installing hooks, we change the state of the irqchip. The initial state of the irqchip for the second gpiochip to register is then disrupted. Signed-off-by: Ludovic Desroches <[email protected]> Signed-off-by: Linus Walleij <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 0dc235afc59a226d951352b0adf4a89b532a9d13 ] Do not put host-endian 0 or 1 into big endian feild. Reported-by: Al Viro <[email protected]> Signed-off-by: Ganesh Goudar <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 54baff8d4e5dce2cef61953b1dc22079cda1ddb1 ] If kstrtoul() fails then we print "charge_full" when it's uninitialized. The debug printk doesn't add anything so I deleted it and cleaned these two functions up a bit. Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: Sebastian Reichel <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit cb90a2c6f77fe9b43d1e3f759bb2f13fe7fa1811 ] Since the max8998 MFD driver supports instantiation by DT, platform data retrieval is handled in MFD probe and cell drivers should get use the pdata field of max8998_dev struct to obtain them. Fixes: ee999fb ("mfd: max8998: Add support for Device Tree") Signed-off-by: Tomasz Figa <[email protected]> Signed-off-by: Paweł Chmiel <[email protected]> Signed-off-by: Sebastian Reichel <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit a75e78f21f9ad4b810868c89dbbabcc3931591ca ] The terminating NUL byte is only there because the buffer is allocated with kzalloc(PAGE_SIZE, GFP_KERNEL), but since the range-check is off-by-one, and PAGE_SIZE==PATH_MAX, the returned string may not be zero-terminated if it is exactly PATH_MAX characters long. Furthermore also the initial loop may theoretically exceed PATH_MAX and cause a fault. Signed-off-by: Bernd Edlinger <[email protected]> Acked-by: Tejun Heo <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 4d19db777a2f32c9b76f6fd517ed8960576cb43e ] Calling napi_schedule() from process context does not ensure that the NET_RX softirq is run in a timely fashion. So trigger it manually. This is no big issue with current code. A call to ndo_open() is usually followed by a ndo_set_rx_mode() call, and for qeth this contains a spin_unlock_bh(). Except for OSN, where qeth_l2_set_rx_mode() bails out early. Nevertheless it's best to not depend on this behaviour, and just fix the issue at its source like all other drivers do. For instance see commit 83a0c6e58901 ("i40e: Invoke softirqs after napi_reschedule"). Fixes: a1c3ed4 ("qeth: NAPI support for l2 and l3 discipline") Signed-off-by: Julian Wiedmann <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 1ad61b612b95980a4d970c52022aa01dfc0f6068 ] If _OSC execution fails today for platforms without an _OSC entry, code is printing a misleading message saying disabling ASPM as follows: acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM We need to ensure that platform supports ASPM to begin with. Reported-by: Michael Kelley <[email protected]> Signed-off-by: Sinan Kaya <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 5963e8a3122471cadfe0eba41c4ceaeaa5c8bb4d ] On the error path of mxs_auart_request_gpio_irq() is performed backward iterating with index i of enum type. Underline enum type may be unsigned char. In this case check (--i >= 0) will be always true and error handling goes into infinite loop. The patch changes the check so that it is valid for signed and unsigned types. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Anton Vasilyev <[email protected]> Acked-by: Uwe Kleine-König <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 984ecdd68de0fa1f63ce205d6c19ef5a7bc67b40 ] The tbl pointer is being derefenced by IOMMU_PAGE_SIZE prior the check if it is not NULL. Just moving the dereference code to after the check, where there will be guarantee that 'tbl' will not be NULL. Signed-off-by: Breno Leitao <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 09b4438db13fa83b6219aee5993711a2aa2a0c64 ] This causes SLB alloation to start 1 beyond the start of the SLB. There is no real problem because after it wraps it stats behaving properly, it's just surprisig to see when looking at SLB traces. Signed-off-by: Nicholas Piggin <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 85a88cabad57d26d826dd94ea34d3a785824d802 ] When performing partition migrations all present CPUs must be online as all present CPUs must make the H_JOIN call as part of the migration process. Once all present CPUs make the H_JOIN call, one CPU is returned to make the rtas call to perform the migration to the destination system. During testing of migration and changing the SMT state we have found instances where CPUs are offlined, as part of the SMT state change, before they make the H_JOIN call. This results in a hung system where every CPU is either in H_JOIN or offline. To prevent this this patch disables CPU hotplug during the migration process. Signed-off-by: Nathan Fontenot <[email protected]> Reviewed-by: Tyrel Datwyler <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 53dd9dce6979bc54d64a3a09a2fb20187a025be7 ] The next update of libfdt has a new dependency on INT_MAX. Update the instances of libfdt_env.h in the kernel to either include the necessary header with the definition or define it locally. Cc: Russell King <[email protected]> Cc: Benjamin Herrenschmidt <[email protected]> Cc: Paul Mackerras <[email protected]> Cc: Michael Ellerman <[email protected]> Cc: [email protected] Cc: [email protected] Signed-off-by: Rob Herring <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 8314c212f995bc0d06b54ad02ef0ab4089781540 ] the charging current uses unsigned int variables, if we step back if the current is still low, we would run into negative which means setting the target to a huge value. Better add checks here. Signed-off-by: Andreas Kemnade <[email protected]> Signed-off-by: Sebastian Reichel <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 079cdff3d0a09c5da10ae1be35def7a116776328 ] This avoids getting woken up from suspend after power interruptions when the bci wrongly thinks the battery is full just because of input current going low because of low input power Signed-off-by: Andreas Kemnade <[email protected]> Signed-off-by: Sebastian Reichel <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit bacade822524e02f662d88f784d2ae821a5546fb ] The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, so make sure the implementation in this driver has returns 'netdev_tx_t' value, and change the function return type to netdev_tx_t. Found by coccinelle. Signed-off-by: YueHaibing <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 81255af8d9d5565004792c295dde49344df450ca ] The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, so make sure the implementation in this driver has returns 'netdev_tx_t' value, and change the function return type to netdev_tx_t. Found by coccinelle. Signed-off-by: YueHaibing <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 0c13b8d1aee87c35a2fbc1d85a1f766227cf54b5 ] The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, so make sure the implementation in this driver has returns 'netdev_tx_t' value, and change the function return type to netdev_tx_t. Found by coccinelle. Signed-off-by: YueHaibing <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit fe72352e37ae8478f4c97975a9831f0c50f22e73 ] The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, so make sure the implementation in this driver has returns 'netdev_tx_t' value, and change the function return type to netdev_tx_t. Found by coccinelle. Signed-off-by: YueHaibing <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 59739131e0ca06db7560f9073fff2fb83f6bc2a5 ] At OTG work running time, it's possible that several events need to be addressed (e.g. ID and VBUS events). The current implementation handles only one event at a time which leads to ignoring the other one. Fix it. Signed-off-by: Loic Poulain <[email protected]> Signed-off-by: Peter Chen <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit dcbf6b18d81bcdc51390ca1b258c17e2e13b7d0c ] am335x-evm has only one CPSW external port physically wired, but DT defines 2 ext. ports. As result, PHY connection failure reported for the second ext. port. Update DT to reflect am335x-evm board HW configuration, and, while here, switch to use phy-handle instead of phy_id. Signed-off-by: Grygorii Strashko <[email protected]> Signed-off-by: Tony Lindgren <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 2f217d24ecaec2012e628d21e244eef0608656a4 ] The unit address of the Cortex-A9 SCU device node contains one zero too many. Remove it. Signed-off-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Linus Walleij <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit ecde29569e3484e1d0a032bf4074449bce4d4a03 ] The "lcdaclk_b_1" group is muxed with the function "lcd" but needs a separate entry to be muxed in with "lcda" rather than "lcd". Signed-off-by: Linus Walleij <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 2f967f9e9fa076affb711da1a8389b5d33814fc6 ] SPI controller nodes should be named 'spi' rather than 'ssp'. Fixing the name enables dtc SPI bus checks. Signed-off-by: Rob Herring <[email protected]> Signed-off-by: Linus Walleij <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit c785896b21dd8e156326ff660050b0074d3431df ] The table id (second) argument to MODULE_DEVICE_TABLE is often referenced otherwise. This is not the case for CPU features. This leads to warnings when building the kernel with Clang: arch/arm/crypto/aes-ce-glue.c:450:1: warning: variable 'cpu_feature_match_AES' is not needed and will not be emitted [-Wunneeded-internal-declaration] module_cpu_feature_match(AES, aes_init); ^ Avoid warnings by using __maybe_unused, similar to commit 1f318a8bafcf ("modules: mark __inittest/__exittest as __maybe_unused"). Fixes: 67bad2f ("cpu: add generic support for CPU feature based module autoloading") Signed-off-by: Stefan Agner <[email protected]> Acked-by: Ard Biesheuvel <[email protected]> Signed-off-by: Herbert Xu <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 75a110a1783ef8324ffd763b24f4ac268253cbca ] This is a workaround for FW bug - MFW generates bandwidth attention in single function mode, which is only expected to be generated in multi function mode. This undesired attention in SF mode results in incorrect HW configuration and resulting into Tx timeout. Signed-off-by: Shahed Shaikh <[email protected]> Signed-off-by: Ariel Elior <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 2b49117a5abee8478b0470cba46ac74f93b4a479 ] The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, so make sure the implementation in this driver has returns 'netdev_tx_t' value, and change the function return type to netdev_tx_t. Found by coccinelle. Signed-off-by: YueHaibing <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

This patch is to fix a crash: #3 [ffffb6580689f898] oops_end at ffffffffa2835bc2 #4 [ffffb6580689f8b8] no_context at ffffffffa28766e7 #5 [ffffb6580689f920] async_page_fault at ffffffffa320135e [exception RIP: f2fs_is_compressed_page+34] RIP: ffffffffa2ba83a2 RSP: ffffb6580689f9d8 RFLAGS: 00010213 RAX: 0000000000000001 RBX: fffffc0f50b34bc0 RCX: 0000000000002122 RDX: 0000000000002123 RSI: 0000000000000c00 RDI: fffffc0f50b34bc0 RBP: ffff97e815a40178 R8: 0000000000000000 R9: ffff97e83ffc9000 R10: 0000000000032300 R11: 0000000000032380 R12: ffffb6580689fa38 R13: fffffc0f50b34bc0 R14: ffff97e825cbd000 R15: 0000000000000c00 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #6 [ffffb6580689f9d8] __is_cp_guaranteed at ffffffffa2b7ea98 #7 [ffffb6580689f9f0] f2fs_submit_page_write at ffffffffa2b81a69 #8 [ffffb6580689fa30] f2fs_do_write_meta_page at ffffffffa2b99777 #9 [ffffb6580689fae0] __f2fs_write_meta_page at ffffffffa2b75f1a #10 [ffffb6580689fb18] f2fs_sync_meta_pages at ffffffffa2b77466 #11 [ffffb6580689fc98] do_checkpoint at ffffffffa2b78e46 #12 [ffffb6580689fd88] f2fs_write_checkpoint at ffffffffa2b79c29 #13 [ffffb6580689fdd0] f2fs_sync_fs at ffffffffa2b69d95 #14 [ffffb6580689fe20] sync_filesystem at ffffffffa2ad2574 #15 [ffffb6580689fe30] generic_shutdown_super at ffffffffa2a9b582 #16 [ffffb6580689fe48] kill_block_super at ffffffffa2a9b6d1 #17 [ffffb6580689fe60] kill_f2fs_super at ffffffffa2b6abe1 #18 [ffffb6580689fea0] deactivate_locked_super at ffffffffa2a9afb6 #19 [ffffb6580689feb8] cleanup_mnt at ffffffffa2abcad4 #20 [ffffb6580689fee0] task_work_run at ffffffffa28bca28 #21 [ffffb6580689ff00] exit_to_usermode_loop at ffffffffa28050b7 #22 [ffffb6580689ff38] do_syscall_64 at ffffffffa280560e #23 [ffffb6580689ff50] entry_SYSCALL_64_after_hwframe at ffffffffa320008c This occurred when umount f2fs if enable F2FS_FS_COMPRESSION with F2FS_IO_TRACE. Fixes it by adding IS_IO_TRACED_PAGE to check validity of pid for page_private. Signed-off-by: Yu Changchun <[email protected]> Reviewed-by: Chao Yu <[email protected]> Signed-off-by: Jaegeuk Kim <[email protected]>

Author: @ tanish2k09 (email: [email protected]) What is it? Kernel-based Lapse ("K-Lapse") is a linear RGB scaling module that 'shifts' RGB based on time (of the day/selected by user), or (since v2.0) brightness. This concept is inspired from LineageOS (formerly known as 'CyanogenMod') ROM's feature "livedisplay" which also changes the display settings (RGB, hue, temperature, etc) based on time. Why did you decide to make this? (Tell me a story). I (personally) am a big fan of the livedisplay feature found on LineageOS ROM. I used it every single day, since Android Lollipop. Starting from Android Nougat, a native night mode solution was added to AOSP and it felt like livedisplay was still way superior, thanks to its various options (you could say it spoiled me, sure). I also maintained a kernel (Venom kernel) for the device I was using at that time. It was all good until the OEM dropped support for the device at Android M, and XDA being XDA, was already working on N ROMs. The issue was, these ROMs weren't LineageOS or based on it, so livedisplay was... gone. I decided I'll try to bring that feature to every other ROM. How would I do that? Of course! The kernel! It worked on every single ROM, it was the key! I started to work on it ASAP and here it is, up on GitHub, licensed under GPL (check klapse.c), open to everyone :) How does it work? Think of it like a fancy night mode, but not really. Klapse is dependent on an RGB interface (like Gamma on MTK and KCAL on SD chipsets). It fetches time from the kernel, converts it to local time, and selects and RGB set based on the time. The result is really smooth shifting of RGB over time. How does it really work (dev)? Klapse mode 1 (time-based scaling) uses a method void klapse_pulse(void) that should ideally be called every minute. This can be done by injecting a pulse call inside another method that is called repeatedly naturally, like cpufreq or atomic or frame commits. It can be anything, whatever you like, even a kthread, as long as it is called repeatedly naturally. To execute every 60 seconds, use jiffies or ktime, or any similar method. The pulse function fetches the current time and makes calculations based on the current hour and the values of the tunables listed down below. Klapse mode 2 (brightness-based scaling) uses a method void set_rgb_slider(<type> bl_lvl) where is the data type of the brightness level used in your kernel source. (OnePlus 6 uses u32 data type for bl_lvl) set_rgb_slider needs to be called/injected inside a function that sets brightness for your device. (OnePlus 6 uses dsi_panel.c for that, check out the diff for that file in /op6) What all stuff can it do? 1, Emulate night mode with the proper RGB settings 2, Smoothly scale from one set of RGB to another set of RGB in integral intervals over time. 3, Reduce perceived brightness using brightness_factor by reducing the amount of color on screen. Allows lower apparent brightness than system permits. 4, Scale RGB based on brightness of display (low brightness usually implies a dark environment, where yellowness is probably useful). 5, Automate the perceived brightness independent of whether klapse is enabled, using its own set of start and stop hours. 6, Be more efficient,faster by residing inside the kernel instead of having to use the HWC HAL like android's night mode. 7, (On older devices) Reduce stuttering or frame lags caused by native night mode. 8, An easier solution against overlay-based apps that run as service in userspace/Android and sometimes block apps asking for permissions. 9, Give you a Livedisplay alternative if it doesn't work in your ROM. 10, Impress your crush so you can get a date (Hey, don't forget to credit me if it works). Alright, so this is a replacement for night mode? NO! Not at all. One can say this is merely an alternative for LineageOS' Livedisplay, but inside a kernel. Night mode is a sub-function of both Livedisplay and KLapse. Most comparisons here were made with night mode because that's what an average user uses, and will relate to the most. There is absolutely no reason for your Android kernel to not have KLapse. Go ahead and add it or ask your kernel maintainer to. It's super-easy! What can it NOT do (yet)? 1, Calculate scaling to the level of minutes, like "Start from 5:37pm till 7:19am". --TODO 2, Make coffee for you. 3, Fly you to the moon. Without a heavy suit. 4, Get you a monthly subscription of free food, cereal included. All these following tunables are found in their respective files in /sys/klapse/ 1. enable_klapse : A switch to enable or disable klapse. Values : 0 = off, 1 = on (since v2.0, 2 = brightness-dependent mode) 2. klapse_start_hour : The hour at which klapse should start scaling the RGB values from daytime to target (see next points). Values : 0-23 3. klapse_stop_hour : The hour by which klapse should scale back the RGB values from target to daytime (see next points). Values : 0-23 4. daytime_rgb : The RGB set that must be used for all the time outside of start and stop hour range. 5. target_rgb : The RGB set that must be scaled towards for all the time inside of start and stop hour range. 6. klapse_scaling_rate : Controls how soon the RGB reaches from daytime to target inside of start and stop hour range. Once target is reached, it remains constant till 30 minutes before stop hour, where target RGB scales back to daytime RGB. 7. brightness_factor : From the name itself, this value has the ability to bend perception and make your display appear as if it is at a lesser brightness level than it actually is at. It works by reducing the RGB values by the same factor. Values : 2-10, (10 means accurate brightness, 5 means 50% of current brightness, you get it) 8. brightness_factor_auto : A switch that allows you to automatically set the brightness factor in a set time range. Value : 0 = off, 1 = on 9. brightness_factor_auto_start_hour : The hour at which brightness_factor should be applied. Works only if #8 is 1. Values : 0-23 10. brightness_factor_auto_stop_hour : The hour at which brightness_factor should be reverted to 10. Works only if #8 is 1. Values : 0-23 11. backlight_range : The brightness range within which klapse should scale from daytime to target_rgb. Works only if #1 is 2. Values : MIN_BRIGHTNESS-MAX_BRIGHTNESS

This patch is to fix a crash: #3 [ffffb6580689f898] oops_end at ffffffffa2835bc2 #4 [ffffb6580689f8b8] no_context at ffffffffa28766e7 #5 [ffffb6580689f920] async_page_fault at ffffffffa320135e [exception RIP: f2fs_is_compressed_page+34] RIP: ffffffffa2ba83a2 RSP: ffffb6580689f9d8 RFLAGS: 00010213 RAX: 0000000000000001 RBX: fffffc0f50b34bc0 RCX: 0000000000002122 RDX: 0000000000002123 RSI: 0000000000000c00 RDI: fffffc0f50b34bc0 RBP: ffff97e815a40178 R8: 0000000000000000 R9: ffff97e83ffc9000 R10: 0000000000032300 R11: 0000000000032380 R12: ffffb6580689fa38 R13: fffffc0f50b34bc0 R14: ffff97e825cbd000 R15: 0000000000000c00 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #6 [ffffb6580689f9d8] __is_cp_guaranteed at ffffffffa2b7ea98 #7 [ffffb6580689f9f0] f2fs_submit_page_write at ffffffffa2b81a69 #8 [ffffb6580689fa30] f2fs_do_write_meta_page at ffffffffa2b99777 #9 [ffffb6580689fae0] __f2fs_write_meta_page at ffffffffa2b75f1a #10 [ffffb6580689fb18] f2fs_sync_meta_pages at ffffffffa2b77466 #11 [ffffb6580689fc98] do_checkpoint at ffffffffa2b78e46 #12 [ffffb6580689fd88] f2fs_write_checkpoint at ffffffffa2b79c29 #13 [ffffb6580689fdd0] f2fs_sync_fs at ffffffffa2b69d95 #14 [ffffb6580689fe20] sync_filesystem at ffffffffa2ad2574 #15 [ffffb6580689fe30] generic_shutdown_super at ffffffffa2a9b582 #16 [ffffb6580689fe48] kill_block_super at ffffffffa2a9b6d1 #17 [ffffb6580689fe60] kill_f2fs_super at ffffffffa2b6abe1 #18 [ffffb6580689fea0] deactivate_locked_super at ffffffffa2a9afb6 #19 [ffffb6580689feb8] cleanup_mnt at ffffffffa2abcad4 #20 [ffffb6580689fee0] task_work_run at ffffffffa28bca28 #21 [ffffb6580689ff00] exit_to_usermode_loop at ffffffffa28050b7 #22 [ffffb6580689ff38] do_syscall_64 at ffffffffa280560e #23 [ffffb6580689ff50] entry_SYSCALL_64_after_hwframe at ffffffffa320008c This occurred when umount f2fs if enable F2FS_FS_COMPRESSION with F2FS_IO_TRACE. Fixes it by adding IS_IO_TRACED_PAGE to check validity of pid for page_private. Signed-off-by: Yu Changchun <[email protected]> Reviewed-by: Chao Yu <[email protected]> Signed-off-by: Jaegeuk Kim <[email protected]>

Author: @ tanish2k09 (email: [email protected]) What is it? Kernel-based Lapse ("K-Lapse") is a linear RGB scaling module that 'shifts' RGB based on time (of the day/selected by user), or (since v2.0) brightness. This concept is inspired from LineageOS (formerly known as 'CyanogenMod') ROM's feature "livedisplay" which also changes the display settings (RGB, hue, temperature, etc) based on time. Why did you decide to make this? (Tell me a story). I (personally) am a big fan of the livedisplay feature found on LineageOS ROM. I used it every single day, since Android Lollipop. Starting from Android Nougat, a native night mode solution was added to AOSP and it felt like livedisplay was still way superior, thanks to its various options (you could say it spoiled me, sure). I also maintained a kernel (Venom kernel) for the device I was using at that time. It was all good until the OEM dropped support for the device at Android M, and XDA being XDA, was already working on N ROMs. The issue was, these ROMs weren't LineageOS or based on it, so livedisplay was... gone. I decided I'll try to bring that feature to every other ROM. How would I do that? Of course! The kernel! It worked on every single ROM, it was the key! I started to work on it ASAP and here it is, up on GitHub, licensed under GPL (check klapse.c), open to everyone :) How does it work? Think of it like a fancy night mode, but not really. Klapse is dependent on an RGB interface (like Gamma on MTK and KCAL on SD chipsets). It fetches time from the kernel, converts it to local time, and selects and RGB set based on the time. The result is really smooth shifting of RGB over time. How does it really work (dev)? Klapse mode 1 (time-based scaling) uses a method void klapse_pulse(void) that should ideally be called every minute. This can be done by injecting a pulse call inside another method that is called repeatedly naturally, like cpufreq or atomic or frame commits. It can be anything, whatever you like, even a kthread, as long as it is called repeatedly naturally. To execute every 60 seconds, use jiffies or ktime, or any similar method. The pulse function fetches the current time and makes calculations based on the current hour and the values of the tunables listed down below. Klapse mode 2 (brightness-based scaling) uses a method void set_rgb_slider(<type> bl_lvl) where is the data type of the brightness level used in your kernel source. (OnePlus 6 uses u32 data type for bl_lvl) set_rgb_slider needs to be called/injected inside a function that sets brightness for your device. (OnePlus 6 uses dsi_panel.c for that, check out the diff for that file in /op6) What all stuff can it do? 1, Emulate night mode with the proper RGB settings 2, Smoothly scale from one set of RGB to another set of RGB in integral intervals over time. 3, Reduce perceived brightness using brightness_factor by reducing the amount of color on screen. Allows lower apparent brightness than system permits. 4, Scale RGB based on brightness of display (low brightness usually implies a dark environment, where yellowness is probably useful). 5, Automate the perceived brightness independent of whether klapse is enabled, using its own set of start and stop hours. 6, Be more efficient,faster by residing inside the kernel instead of having to use the HWC HAL like android's night mode. 7, (On older devices) Reduce stuttering or frame lags caused by native night mode. 8, An easier solution against overlay-based apps that run as service in userspace/Android and sometimes block apps asking for permissions. 9, Give you a Livedisplay alternative if it doesn't work in your ROM. 10, Impress your crush so you can get a date (Hey, don't forget to credit me if it works). Alright, so this is a replacement for night mode? NO! Not at all. One can say this is merely an alternative for LineageOS' Livedisplay, but inside a kernel. Night mode is a sub-function of both Livedisplay and KLapse. Most comparisons here were made with night mode because that's what an average user uses, and will relate to the most. There is absolutely no reason for your Android kernel to not have KLapse. Go ahead and add it or ask your kernel maintainer to. It's super-easy! What can it NOT do (yet)? 1, Calculate scaling to the level of minutes, like "Start from 5:37pm till 7:19am". --TODO 2, Make coffee for you. 3, Fly you to the moon. Without a heavy suit. 4, Get you a monthly subscription of free food, cereal included. All these following tunables are found in their respective files in /sys/klapse/ 1. enable_klapse : A switch to enable or disable klapse. Values : 0 = off, 1 = on (since v2.0, 2 = brightness-dependent mode) 2. klapse_start_hour : The hour at which klapse should start scaling the RGB values from daytime to target (see next points). Values : 0-23 3. klapse_stop_hour : The hour by which klapse should scale back the RGB values from target to daytime (see next points). Values : 0-23 4. daytime_rgb : The RGB set that must be used for all the time outside of start and stop hour range. 5. target_rgb : The RGB set that must be scaled towards for all the time inside of start and stop hour range. 6. klapse_scaling_rate : Controls how soon the RGB reaches from daytime to target inside of start and stop hour range. Once target is reached, it remains constant till 30 minutes before stop hour, where target RGB scales back to daytime RGB. 7. brightness_factor : From the name itself, this value has the ability to bend perception and make your display appear as if it is at a lesser brightness level than it actually is at. It works by reducing the RGB values by the same factor. Values : 2-10, (10 means accurate brightness, 5 means 50% of current brightness, you get it) 8. brightness_factor_auto : A switch that allows you to automatically set the brightness factor in a set time range. Value : 0 = off, 1 = on 9. brightness_factor_auto_start_hour : The hour at which brightness_factor should be applied. Works only if #8 is 1. Values : 0-23 10. brightness_factor_auto_stop_hour : The hour at which brightness_factor should be reverted to 10. Works only if #8 is 1. Values : 0-23 11. backlight_range : The brightness range within which klapse should scale from daytime to target_rgb. Works only if #1 is 2. Values : MIN_BRIGHTNESS-MAX_BRIGHTNESS

This patch is to fix a crash: #3 [ffffb6580689f898] oops_end at ffffffffa2835bc2 #4 [ffffb6580689f8b8] no_context at ffffffffa28766e7 #5 [ffffb6580689f920] async_page_fault at ffffffffa320135e [exception RIP: f2fs_is_compressed_page+34] RIP: ffffffffa2ba83a2 RSP: ffffb6580689f9d8 RFLAGS: 00010213 RAX: 0000000000000001 RBX: fffffc0f50b34bc0 RCX: 0000000000002122 RDX: 0000000000002123 RSI: 0000000000000c00 RDI: fffffc0f50b34bc0 RBP: ffff97e815a40178 R8: 0000000000000000 R9: ffff97e83ffc9000 R10: 0000000000032300 R11: 0000000000032380 R12: ffffb6580689fa38 R13: fffffc0f50b34bc0 R14: ffff97e825cbd000 R15: 0000000000000c00 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #6 [ffffb6580689f9d8] __is_cp_guaranteed at ffffffffa2b7ea98 #7 [ffffb6580689f9f0] f2fs_submit_page_write at ffffffffa2b81a69 #8 [ffffb6580689fa30] f2fs_do_write_meta_page at ffffffffa2b99777 #9 [ffffb6580689fae0] __f2fs_write_meta_page at ffffffffa2b75f1a #10 [ffffb6580689fb18] f2fs_sync_meta_pages at ffffffffa2b77466 #11 [ffffb6580689fc98] do_checkpoint at ffffffffa2b78e46 #12 [ffffb6580689fd88] f2fs_write_checkpoint at ffffffffa2b79c29 #13 [ffffb6580689fdd0] f2fs_sync_fs at ffffffffa2b69d95 #14 [ffffb6580689fe20] sync_filesystem at ffffffffa2ad2574 #15 [ffffb6580689fe30] generic_shutdown_super at ffffffffa2a9b582 #16 [ffffb6580689fe48] kill_block_super at ffffffffa2a9b6d1 #17 [ffffb6580689fe60] kill_f2fs_super at ffffffffa2b6abe1 #18 [ffffb6580689fea0] deactivate_locked_super at ffffffffa2a9afb6 #19 [ffffb6580689feb8] cleanup_mnt at ffffffffa2abcad4 #20 [ffffb6580689fee0] task_work_run at ffffffffa28bca28 #21 [ffffb6580689ff00] exit_to_usermode_loop at ffffffffa28050b7 #22 [ffffb6580689ff38] do_syscall_64 at ffffffffa280560e #23 [ffffb6580689ff50] entry_SYSCALL_64_after_hwframe at ffffffffa320008c This occurred when umount f2fs if enable F2FS_FS_COMPRESSION with F2FS_IO_TRACE. Fixes it by adding IS_IO_TRACED_PAGE to check validity of pid for page_private. Signed-off-by: Yu Changchun <[email protected]> Reviewed-by: Chao Yu <[email protected]> Signed-off-by: Jaegeuk Kim <[email protected]>

Author: @ tanish2k09 (email: [email protected]) What is it? Kernel-based Lapse ("K-Lapse") is a linear RGB scaling module that 'shifts' RGB based on time (of the day/selected by user), or (since v2.0) brightness. This concept is inspired from LineageOS (formerly known as 'CyanogenMod') ROM's feature "livedisplay" which also changes the display settings (RGB, hue, temperature, etc) based on time. Why did you decide to make this? (Tell me a story). I (personally) am a big fan of the livedisplay feature found on LineageOS ROM. I used it every single day, since Android Lollipop. Starting from Android Nougat, a native night mode solution was added to AOSP and it felt like livedisplay was still way superior, thanks to its various options (you could say it spoiled me, sure). I also maintained a kernel (Venom kernel) for the device I was using at that time. It was all good until the OEM dropped support for the device at Android M, and XDA being XDA, was already working on N ROMs. The issue was, these ROMs weren't LineageOS or based on it, so livedisplay was... gone. I decided I'll try to bring that feature to every other ROM. How would I do that? Of course! The kernel! It worked on every single ROM, it was the key! I started to work on it ASAP and here it is, up on GitHub, licensed under GPL (check klapse.c), open to everyone :) How does it work? Think of it like a fancy night mode, but not really. Klapse is dependent on an RGB interface (like Gamma on MTK and KCAL on SD chipsets). It fetches time from the kernel, converts it to local time, and selects and RGB set based on the time. The result is really smooth shifting of RGB over time. How does it really work (dev)? Klapse mode 1 (time-based scaling) uses a method void klapse_pulse(void) that should ideally be called every minute. This can be done by injecting a pulse call inside another method that is called repeatedly naturally, like cpufreq or atomic or frame commits. It can be anything, whatever you like, even a kthread, as long as it is called repeatedly naturally. To execute every 60 seconds, use jiffies or ktime, or any similar method. The pulse function fetches the current time and makes calculations based on the current hour and the values of the tunables listed down below. Klapse mode 2 (brightness-based scaling) uses a method void set_rgb_slider(<type> bl_lvl) where is the data type of the brightness level used in your kernel source. (OnePlus 6 uses u32 data type for bl_lvl) set_rgb_slider needs to be called/injected inside a function that sets brightness for your device. (OnePlus 6 uses dsi_panel.c for that, check out the diff for that file in /op6) What all stuff can it do? 1, Emulate night mode with the proper RGB settings 2, Smoothly scale from one set of RGB to another set of RGB in integral intervals over time. 3, Reduce perceived brightness using brightness_factor by reducing the amount of color on screen. Allows lower apparent brightness than system permits. 4, Scale RGB based on brightness of display (low brightness usually implies a dark environment, where yellowness is probably useful). 5, Automate the perceived brightness independent of whether klapse is enabled, using its own set of start and stop hours. 6, Be more efficient,faster by residing inside the kernel instead of having to use the HWC HAL like android's night mode. 7, (On older devices) Reduce stuttering or frame lags caused by native night mode. 8, An easier solution against overlay-based apps that run as service in userspace/Android and sometimes block apps asking for permissions. 9, Give you a Livedisplay alternative if it doesn't work in your ROM. 10, Impress your crush so you can get a date (Hey, don't forget to credit me if it works). Alright, so this is a replacement for night mode? NO! Not at all. One can say this is merely an alternative for LineageOS' Livedisplay, but inside a kernel. Night mode is a sub-function of both Livedisplay and KLapse. Most comparisons here were made with night mode because that's what an average user uses, and will relate to the most. There is absolutely no reason for your Android kernel to not have KLapse. Go ahead and add it or ask your kernel maintainer to. It's super-easy! What can it NOT do (yet)? 1, Calculate scaling to the level of minutes, like "Start from 5:37pm till 7:19am". --TODO 2, Make coffee for you. 3, Fly you to the moon. Without a heavy suit. 4, Get you a monthly subscription of free food, cereal included. All these following tunables are found in their respective files in /sys/klapse/ 1. enable_klapse : A switch to enable or disable klapse. Values : 0 = off, 1 = on (since v2.0, 2 = brightness-dependent mode) 2. klapse_start_hour : The hour at which klapse should start scaling the RGB values from daytime to target (see next points). Values : 0-23 3. klapse_stop_hour : The hour by which klapse should scale back the RGB values from target to daytime (see next points). Values : 0-23 4. daytime_rgb : The RGB set that must be used for all the time outside of start and stop hour range. 5. target_rgb : The RGB set that must be scaled towards for all the time inside of start and stop hour range. 6. klapse_scaling_rate : Controls how soon the RGB reaches from daytime to target inside of start and stop hour range. Once target is reached, it remains constant till 30 minutes before stop hour, where target RGB scales back to daytime RGB. 7. brightness_factor : From the name itself, this value has the ability to bend perception and make your display appear as if it is at a lesser brightness level than it actually is at. It works by reducing the RGB values by the same factor. Values : 2-10, (10 means accurate brightness, 5 means 50% of current brightness, you get it) 8. brightness_factor_auto : A switch that allows you to automatically set the brightness factor in a set time range. Value : 0 = off, 1 = on 9. brightness_factor_auto_start_hour : The hour at which brightness_factor should be applied. Works only if #8 is 1. Values : 0-23 10. brightness_factor_auto_stop_hour : The hour at which brightness_factor should be reverted to 10. Works only if #8 is 1. Values : 0-23 11. backlight_range : The brightness range within which klapse should scale from daytime to target_rgb. Works only if #1 is 2. Values : MIN_BRIGHTNESS-MAX_BRIGHTNESS

This patch is to fix a crash: #3 [ffffb6580689f898] oops_end at ffffffffa2835bc2 #4 [ffffb6580689f8b8] no_context at ffffffffa28766e7 #5 [ffffb6580689f920] async_page_fault at ffffffffa320135e [exception RIP: f2fs_is_compressed_page+34] RIP: ffffffffa2ba83a2 RSP: ffffb6580689f9d8 RFLAGS: 00010213 RAX: 0000000000000001 RBX: fffffc0f50b34bc0 RCX: 0000000000002122 RDX: 0000000000002123 RSI: 0000000000000c00 RDI: fffffc0f50b34bc0 RBP: ffff97e815a40178 R8: 0000000000000000 R9: ffff97e83ffc9000 R10: 0000000000032300 R11: 0000000000032380 R12: ffffb6580689fa38 R13: fffffc0f50b34bc0 R14: ffff97e825cbd000 R15: 0000000000000c00 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #6 [ffffb6580689f9d8] __is_cp_guaranteed at ffffffffa2b7ea98 #7 [ffffb6580689f9f0] f2fs_submit_page_write at ffffffffa2b81a69 #8 [ffffb6580689fa30] f2fs_do_write_meta_page at ffffffffa2b99777 #9 [ffffb6580689fae0] __f2fs_write_meta_page at ffffffffa2b75f1a #10 [ffffb6580689fb18] f2fs_sync_meta_pages at ffffffffa2b77466 #11 [ffffb6580689fc98] do_checkpoint at ffffffffa2b78e46 #12 [ffffb6580689fd88] f2fs_write_checkpoint at ffffffffa2b79c29 #13 [ffffb6580689fdd0] f2fs_sync_fs at ffffffffa2b69d95 #14 [ffffb6580689fe20] sync_filesystem at ffffffffa2ad2574 #15 [ffffb6580689fe30] generic_shutdown_super at ffffffffa2a9b582 #16 [ffffb6580689fe48] kill_block_super at ffffffffa2a9b6d1 #17 [ffffb6580689fe60] kill_f2fs_super at ffffffffa2b6abe1 #18 [ffffb6580689fea0] deactivate_locked_super at ffffffffa2a9afb6 #19 [ffffb6580689feb8] cleanup_mnt at ffffffffa2abcad4 #20 [ffffb6580689fee0] task_work_run at ffffffffa28bca28 #21 [ffffb6580689ff00] exit_to_usermode_loop at ffffffffa28050b7 #22 [ffffb6580689ff38] do_syscall_64 at ffffffffa280560e #23 [ffffb6580689ff50] entry_SYSCALL_64_after_hwframe at ffffffffa320008c This occurred when umount f2fs if enable F2FS_FS_COMPRESSION with F2FS_IO_TRACE. Fixes it by adding IS_IO_TRACED_PAGE to check validity of pid for page_private. Signed-off-by: Yu Changchun <[email protected]> Reviewed-by: Chao Yu <[email protected]> Signed-off-by: Jaegeuk Kim <[email protected]>

Author: @ tanish2k09 (email: [email protected]) What is it? Kernel-based Lapse ("K-Lapse") is a linear RGB scaling module that 'shifts' RGB based on time (of the day/selected by user), or (since v2.0) brightness. This concept is inspired from LineageOS (formerly known as 'CyanogenMod') ROM's feature "livedisplay" which also changes the display settings (RGB, hue, temperature, etc) based on time. Why did you decide to make this? (Tell me a story). I (personally) am a big fan of the livedisplay feature found on LineageOS ROM. I used it every single day, since Android Lollipop. Starting from Android Nougat, a native night mode solution was added to AOSP and it felt like livedisplay was still way superior, thanks to its various options (you could say it spoiled me, sure). I also maintained a kernel (Venom kernel) for the device I was using at that time. It was all good until the OEM dropped support for the device at Android M, and XDA being XDA, was already working on N ROMs. The issue was, these ROMs weren't LineageOS or based on it, so livedisplay was... gone. I decided I'll try to bring that feature to every other ROM. How would I do that? Of course! The kernel! It worked on every single ROM, it was the key! I started to work on it ASAP and here it is, up on GitHub, licensed under GPL (check klapse.c), open to everyone :) How does it work? Think of it like a fancy night mode, but not really. Klapse is dependent on an RGB interface (like Gamma on MTK and KCAL on SD chipsets). It fetches time from the kernel, converts it to local time, and selects and RGB set based on the time. The result is really smooth shifting of RGB over time. How does it really work (dev)? Klapse mode 1 (time-based scaling) uses a method void klapse_pulse(void) that should ideally be called every minute. This can be done by injecting a pulse call inside another method that is called repeatedly naturally, like cpufreq or atomic or frame commits. It can be anything, whatever you like, even a kthread, as long as it is called repeatedly naturally. To execute every 60 seconds, use jiffies or ktime, or any similar method. The pulse function fetches the current time and makes calculations based on the current hour and the values of the tunables listed down below. Klapse mode 2 (brightness-based scaling) uses a method void set_rgb_slider(<type> bl_lvl) where is the data type of the brightness level used in your kernel source. (OnePlus 6 uses u32 data type for bl_lvl) set_rgb_slider needs to be called/injected inside a function that sets brightness for your device. (OnePlus 6 uses dsi_panel.c for that, check out the diff for that file in /op6) What all stuff can it do? 1, Emulate night mode with the proper RGB settings 2, Smoothly scale from one set of RGB to another set of RGB in integral intervals over time. 3, Reduce perceived brightness using brightness_factor by reducing the amount of color on screen. Allows lower apparent brightness than system permits. 4, Scale RGB based on brightness of display (low brightness usually implies a dark environment, where yellowness is probably useful). 5, Automate the perceived brightness independent of whether klapse is enabled, using its own set of start and stop hours. 6, Be more efficient,faster by residing inside the kernel instead of having to use the HWC HAL like android's night mode. 7, (On older devices) Reduce stuttering or frame lags caused by native night mode. 8, An easier solution against overlay-based apps that run as service in userspace/Android and sometimes block apps asking for permissions. 9, Give you a Livedisplay alternative if it doesn't work in your ROM. 10, Impress your crush so you can get a date (Hey, don't forget to credit me if it works). Alright, so this is a replacement for night mode? NO! Not at all. One can say this is merely an alternative for LineageOS' Livedisplay, but inside a kernel. Night mode is a sub-function of both Livedisplay and KLapse. Most comparisons here were made with night mode because that's what an average user uses, and will relate to the most. There is absolutely no reason for your Android kernel to not have KLapse. Go ahead and add it or ask your kernel maintainer to. It's super-easy! What can it NOT do (yet)? 1, Calculate scaling to the level of minutes, like "Start from 5:37pm till 7:19am". --TODO 2, Make coffee for you. 3, Fly you to the moon. Without a heavy suit. 4, Get you a monthly subscription of free food, cereal included. All these following tunables are found in their respective files in /sys/klapse/ 1. enable_klapse : A switch to enable or disable klapse. Values : 0 = off, 1 = on (since v2.0, 2 = brightness-dependent mode) 2. klapse_start_hour : The hour at which klapse should start scaling the RGB values from daytime to target (see next points). Values : 0-23 3. klapse_stop_hour : The hour by which klapse should scale back the RGB values from target to daytime (see next points). Values : 0-23 4. daytime_rgb : The RGB set that must be used for all the time outside of start and stop hour range. 5. target_rgb : The RGB set that must be scaled towards for all the time inside of start and stop hour range. 6. klapse_scaling_rate : Controls how soon the RGB reaches from daytime to target inside of start and stop hour range. Once target is reached, it remains constant till 30 minutes before stop hour, where target RGB scales back to daytime RGB. 7. brightness_factor : From the name itself, this value has the ability to bend perception and make your display appear as if it is at a lesser brightness level than it actually is at. It works by reducing the RGB values by the same factor. Values : 2-10, (10 means accurate brightness, 5 means 50% of current brightness, you get it) 8. brightness_factor_auto : A switch that allows you to automatically set the brightness factor in a set time range. Value : 0 = off, 1 = on 9. brightness_factor_auto_start_hour : The hour at which brightness_factor should be applied. Works only if #8 is 1. Values : 0-23 10. brightness_factor_auto_stop_hour : The hour at which brightness_factor should be reverted to 10. Works only if #8 is 1. Values : 0-23 11. backlight_range : The brightness range within which klapse should scale from daytime to target_rgb. Works only if #1 is 2. Values : MIN_BRIGHTNESS-MAX_BRIGHTNESS

[ Upstream commit e24c6447ccb7b1a01f9bf0aec94939e6450c0b4d ] I compiled with AddressSanitizer and I had these memory leaks while I was using the tep_parse_format function: Direct leak of 28 byte(s) in 4 object(s) allocated from: #0 0x7fb07db49ffe in __interceptor_realloc (/lib/x86_64-linux-gnu/libasan.so.5+0x10dffe) #1 0x7fb07a724228 in extend_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:985 #2 0x7fb07a724c21 in __read_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1140 #3 0x7fb07a724f78 in read_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1206 #4 0x7fb07a725191 in __read_expect_type /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1291 #5 0x7fb07a7251df in read_expect_type /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1299 #6 0x7fb07a72e6c8 in process_dynamic_array_len /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:2849 #7 0x7fb07a7304b8 in process_function /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3161 #8 0x7fb07a730900 in process_arg_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3207 #9 0x7fb07a727c0b in process_arg /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1786 #10 0x7fb07a731080 in event_read_print_args /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3285 #11 0x7fb07a731722 in event_read_print /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3369 #12 0x7fb07a740054 in __tep_parse_format /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6335 #13 0x7fb07a74047a in __parse_event /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6389 #14 0x7fb07a740536 in tep_parse_format /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6431 #15 0x7fb07a785acf in parse_event ../../../src/fs-src/fs.c:251 #16 0x7fb07a785ccd in parse_systems ../../../src/fs-src/fs.c:284 #17 0x7fb07a786fb3 in read_metadata ../../../src/fs-src/fs.c:593 #18 0x7fb07a78760e in ftrace_fs_source_init ../../../src/fs-src/fs.c:727 #19 0x7fb07d90c19c in add_component_with_init_method_data ../../../../src/lib/graph/graph.c:1048 #20 0x7fb07d90c87b in add_source_component_with_initialize_method_data ../../../../src/lib/graph/graph.c:1127 #21 0x7fb07d90c92a in bt_graph_add_source_component ../../../../src/lib/graph/graph.c:1152 #22 0x55db11aa632e in cmd_run_ctx_create_components_from_config_components ../../../src/cli/babeltrace2.c:2252 #23 0x55db11aa6fda in cmd_run_ctx_create_components ../../../src/cli/babeltrace2.c:2347 #24 0x55db11aa780c in cmd_run ../../../src/cli/babeltrace2.c:2461 #25 0x55db11aa8a7d in main ../../../src/cli/babeltrace2.c:2673 #26 0x7fb07d5460b2 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x270b2) The token variable in the process_dynamic_array_len function is allocated in the read_expect_type function, but is not freed before calling the read_token function. Free the token variable before calling read_token in order to plug the leak. Signed-off-by: Philippe Duplessis-Guindon <[email protected]> Reviewed-by: Steven Rostedt (VMware) <[email protected]> Link: https://lore.kernel.org/linux-trace-devel/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit d26383dcb2b4b8629fde05270b4e3633be9e3d4b ] The following leaks were detected by ASAN: Indirect leak of 360 byte(s) in 9 object(s) allocated from: #0 0x7fecc305180e in calloc (/lib/x86_64-linux-gnu/libasan.so.5+0x10780e) #1 0x560578f6dce5 in perf_pmu__new_format util/pmu.c:1333 #2 0x560578f752fc in perf_pmu_parse util/pmu.y:59 #3 0x560578f6a8b7 in perf_pmu__format_parse util/pmu.c:73 #4 0x560578e07045 in test__pmu tests/pmu.c:155 #5 0x560578de109b in run_test tests/builtin-test.c:410 #6 0x560578de109b in test_and_print tests/builtin-test.c:440 #7 0x560578de401a in __cmd_test tests/builtin-test.c:661 #8 0x560578de401a in cmd_test tests/builtin-test.c:807 #9 0x560578e49354 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312 #10 0x560578ce71a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364 #11 0x560578ce71a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408 #12 0x560578ce71a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538 #13 0x7fecc2b7acc9 in __libc_start_main ../csu/libc-start.c:308 Fixes: cff7f95 ("perf tests: Move pmu tests into separate object") Signed-off-by: Namhyung Kim <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit e773ca7da8beeca7f17fe4c9d1284a2b66839cc1 ] Actually, burst size is equal to '1 << desc->rqcfg.brst_size'. we should use burst size, not desc->rqcfg.brst_size. dma memcpy performance on Rockchip RV1126 @ 1512MHz A7, 1056MHz LPDDR3, 200MHz DMA: dmatest: /# echo dma0chan0 > /sys/module/dmatest/parameters/channel /# echo 4194304 > /sys/module/dmatest/parameters/test_buf_size /# echo 8 > /sys/module/dmatest/parameters/iterations /# echo y > /sys/module/dmatest/parameters/norandom /# echo y > /sys/module/dmatest/parameters/verbose /# echo 1 > /sys/module/dmatest/parameters/run dmatest: dma0chan0-copy0: result #1: 'test passed' with src_off=0x0 dst_off=0x0 len=0x400000 dmatest: dma0chan0-copy0: result #2: 'test passed' with src_off=0x0 dst_off=0x0 len=0x400000 dmatest: dma0chan0-copy0: result #3: 'test passed' with src_off=0x0 dst_off=0x0 len=0x400000 dmatest: dma0chan0-copy0: result #4: 'test passed' with src_off=0x0 dst_off=0x0 len=0x400000 dmatest: dma0chan0-copy0: result #5: 'test passed' with src_off=0x0 dst_off=0x0 len=0x400000 dmatest: dma0chan0-copy0: result #6: 'test passed' with src_off=0x0 dst_off=0x0 len=0x400000 dmatest: dma0chan0-copy0: result #7: 'test passed' with src_off=0x0 dst_off=0x0 len=0x400000 dmatest: dma0chan0-copy0: result #8: 'test passed' with src_off=0x0 dst_off=0x0 len=0x400000 Before: dmatest: dma0chan0-copy0: summary 8 tests, 0 failures 48 iops 200338 KB/s (0) After this patch: dmatest: dma0chan0-copy0: summary 8 tests, 0 failures 179 iops 734873 KB/s (0) After this patch and increase dma clk to 400MHz: dmatest: dma0chan0-copy0: summary 8 tests, 0 failures 259 iops 1062929 KB/s (0) Signed-off-by: Sugar Zhang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

This patch is to fix a crash: #3 [ffffb6580689f898] oops_end at ffffffffa2835bc2 #4 [ffffb6580689f8b8] no_context at ffffffffa28766e7 #5 [ffffb6580689f920] async_page_fault at ffffffffa320135e [exception RIP: f2fs_is_compressed_page+34] RIP: ffffffffa2ba83a2 RSP: ffffb6580689f9d8 RFLAGS: 00010213 RAX: 0000000000000001 RBX: fffffc0f50b34bc0 RCX: 0000000000002122 RDX: 0000000000002123 RSI: 0000000000000c00 RDI: fffffc0f50b34bc0 RBP: ffff97e815a40178 R8: 0000000000000000 R9: ffff97e83ffc9000 R10: 0000000000032300 R11: 0000000000032380 R12: ffffb6580689fa38 R13: fffffc0f50b34bc0 R14: ffff97e825cbd000 R15: 0000000000000c00 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #6 [ffffb6580689f9d8] __is_cp_guaranteed at ffffffffa2b7ea98 #7 [ffffb6580689f9f0] f2fs_submit_page_write at ffffffffa2b81a69 #8 [ffffb6580689fa30] f2fs_do_write_meta_page at ffffffffa2b99777 #9 [ffffb6580689fae0] __f2fs_write_meta_page at ffffffffa2b75f1a #10 [ffffb6580689fb18] f2fs_sync_meta_pages at ffffffffa2b77466 #11 [ffffb6580689fc98] do_checkpoint at ffffffffa2b78e46 #12 [ffffb6580689fd88] f2fs_write_checkpoint at ffffffffa2b79c29 #13 [ffffb6580689fdd0] f2fs_sync_fs at ffffffffa2b69d95 #14 [ffffb6580689fe20] sync_filesystem at ffffffffa2ad2574 #15 [ffffb6580689fe30] generic_shutdown_super at ffffffffa2a9b582 #16 [ffffb6580689fe48] kill_block_super at ffffffffa2a9b6d1 #17 [ffffb6580689fe60] kill_f2fs_super at ffffffffa2b6abe1 #18 [ffffb6580689fea0] deactivate_locked_super at ffffffffa2a9afb6 #19 [ffffb6580689feb8] cleanup_mnt at ffffffffa2abcad4 #20 [ffffb6580689fee0] task_work_run at ffffffffa28bca28 #21 [ffffb6580689ff00] exit_to_usermode_loop at ffffffffa28050b7 #22 [ffffb6580689ff38] do_syscall_64 at ffffffffa280560e #23 [ffffb6580689ff50] entry_SYSCALL_64_after_hwframe at ffffffffa320008c This occurred when umount f2fs if enable F2FS_FS_COMPRESSION with F2FS_IO_TRACE. Fixes it by adding IS_IO_TRACED_PAGE to check validity of pid for page_private. Signed-off-by: Yu Changchun <[email protected]> Reviewed-by: Chao Yu <[email protected]> Signed-off-by: Jaegeuk Kim <[email protected]>

commit 572c83acdcdafeb04e70aa46be1fa539310be20c upstream. In fstest btrfs/064 a transaction abort in __btrfs_cow_block could lead to a system lockup. It gets stuck trying to write back inodes, and the write back thread was trying to lock an extent buffer: $ cat /proc/2143497/stack [<0>] __btrfs_tree_lock+0x108/0x250 [<0>] lock_extent_buffer_for_io+0x35e/0x3a0 [<0>] btree_write_cache_pages+0x15a/0x3b0 [<0>] do_writepages+0x28/0xb0 [<0>] __writeback_single_inode+0x54/0x5c0 [<0>] writeback_sb_inodes+0x1e8/0x510 [<0>] wb_writeback+0xcc/0x440 [<0>] wb_workfn+0xd7/0x650 [<0>] process_one_work+0x236/0x560 [<0>] worker_thread+0x55/0x3c0 [<0>] kthread+0x13a/0x150 [<0>] ret_from_fork+0x1f/0x30 This is because we got an error while COWing a block, specifically here if (test_bit(BTRFS_ROOT_SHAREABLE, &root->state)) { ret = btrfs_reloc_cow_block(trans, root, buf, cow); if (ret) { btrfs_abort_transaction(trans, ret); return ret; } } [16402.241552] BTRFS: Transaction aborted (error -2) [16402.242362] WARNING: CPU: 1 PID: 2563188 at fs/btrfs/ctree.c:1074 __btrfs_cow_block+0x376/0x540 [16402.249469] CPU: 1 PID: 2563188 Comm: fsstress Not tainted 5.9.0-rc6+ #8 [16402.249936] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014 [16402.250525] RIP: 0010:__btrfs_cow_block+0x376/0x540 [16402.252417] RSP: 0018:ffff9cca40e578b0 EFLAGS: 00010282 [16402.252787] RAX: 0000000000000025 RBX: 0000000000000002 RCX: ffff9132bbd19388 [16402.253278] RDX: 00000000ffffffd8 RSI: 0000000000000027 RDI: ffff9132bbd19380 [16402.254063] RBP: ffff9132b41a49c0 R08: 0000000000000000 R09: 0000000000000000 [16402.254887] R10: 0000000000000000 R11: ffff91324758b080 R12: ffff91326ef17ce0 [16402.255694] R13: ffff91325fc0f000 R14: ffff91326ef176b0 R15: ffff9132815e2000 [16402.256321] FS: 00007f542c6d7b80(0000) GS:ffff9132bbd00000(0000) knlGS:0000000000000000 [16402.256973] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [16402.257374] CR2: 00007f127b83f250 CR3: 0000000133480002 CR4: 0000000000370ee0 [16402.257867] Call Trace: [16402.258072] btrfs_cow_block+0x109/0x230 [16402.258356] btrfs_search_slot+0x530/0x9d0 [16402.258655] btrfs_lookup_file_extent+0x37/0x40 [16402.259155] __btrfs_drop_extents+0x13c/0xd60 [16402.259628] ? btrfs_block_rsv_migrate+0x4f/0xb0 [16402.259949] btrfs_replace_file_extents+0x190/0x820 [16402.260873] btrfs_clone+0x9ae/0xc00 [16402.261139] btrfs_extent_same_range+0x66/0x90 [16402.261771] btrfs_remap_file_range+0x353/0x3b1 [16402.262333] vfs_dedupe_file_range_one.part.0+0xd5/0x140 [16402.262821] vfs_dedupe_file_range+0x189/0x220 [16402.263150] do_vfs_ioctl+0x552/0x700 [16402.263662] __x64_sys_ioctl+0x62/0xb0 [16402.264023] do_syscall_64+0x33/0x40 [16402.264364] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [16402.264862] RIP: 0033:0x7f542c7d15cb [16402.266901] RSP: 002b:00007ffd35944ea8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [16402.267627] RAX: ffffffffffffffda RBX: 00000000009d1968 RCX: 00007f542c7d15cb [16402.268298] RDX: 00000000009d2490 RSI: 00000000c0189436 RDI: 0000000000000003 [16402.268958] RBP: 00000000009d2520 R08: 0000000000000036 R09: 00000000009d2e64 [16402.269726] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000002 [16402.270659] R13: 000000000001f000 R14: 00000000009d1970 R15: 00000000009d2e80 [16402.271498] irq event stamp: 0 [16402.271846] hardirqs last enabled at (0): [<0000000000000000>] 0x0 [16402.272497] hardirqs last disabled at (0): [<ffffffff910dbf59>] copy_process+0x6b9/0x1ba0 [16402.273343] softirqs last enabled at (0): [<ffffffff910dbf59>] copy_process+0x6b9/0x1ba0 [16402.273905] softirqs last disabled at (0): [<0000000000000000>] 0x0 [16402.274338] ---[ end trace 737874a5a41a8236 ]--- [16402.274669] BTRFS: error (device dm-9) in __btrfs_cow_block:1074: errno=-2 No such entry [16402.276179] BTRFS info (device dm-9): forced readonly [16402.277046] BTRFS: error (device dm-9) in btrfs_replace_file_extents:2723: errno=-2 No such entry [16402.278744] BTRFS: error (device dm-9) in __btrfs_cow_block:1074: errno=-2 No such entry [16402.279968] BTRFS: error (device dm-9) in __btrfs_cow_block:1074: errno=-2 No such entry [16402.280582] BTRFS info (device dm-9): balance: ended with status: -30 The problem here is that as soon as we allocate the new block it is locked and marked dirty in the btree inode. This means that we could attempt to writeback this block and need to lock the extent buffer. However we're not unlocking it here and thus we deadlock. Fix this by unlocking the cow block if we have any errors inside of __btrfs_cow_block, and also free it so we do not leak it. CC: [email protected] # 4.4+ Reviewed-by: Filipe Manana <[email protected]> Signed-off-by: Josef Bacik <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]> [sudip: use old btrfs_abort_transaction()] Signed-off-by: Sudip Mukherjee <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit 4a9d81caf841cd2c0ae36abec9c2963bf21d0284 ] If the elem is deleted during be iterated on it, the iteration process will fall into an endless loop. kernel: NMI watchdog: BUG: soft lockup - CPU#4 stuck for 22s! [nfsd:17137] PID: 17137 TASK: ffff8818d93c0000 CPU: 4 COMMAND: "nfsd" [exception RIP: __state_in_grace+76] RIP: ffffffffc00e817c RSP: ffff8818d3aefc98 RFLAGS: 00000246 RAX: ffff881dc0c38298 RBX: ffffffff81b03580 RCX: ffff881dc02c9f50 RDX: ffff881e3fce8500 RSI: 0000000000000001 RDI: ffffffff81b03580 RBP: ffff8818d3aefca0 R8: 0000000000000020 R9: ffff8818d3aefd40 R10: ffff88017fc03800 R11: ffff8818e83933c0 R12: ffff8818d3aefd40 R13: 0000000000000000 R14: ffff8818e8391068 R15: ffff8818fa6e4000 CS: 0010 SS: 0018 #0 [ffff8818d3aefc98] opens_in_grace at ffffffffc00e81e3 [grace] #1 [ffff8818d3aefca8] nfs4_preprocess_stateid_op at ffffffffc02a3e6c [nfsd] #2 [ffff8818d3aefd18] nfsd4_write at ffffffffc028ed5b [nfsd] #3 [ffff8818d3aefd80] nfsd4_proc_compound at ffffffffc0290a0d [nfsd] #4 [ffff8818d3aefdd0] nfsd_dispatch at ffffffffc027b800 [nfsd] #5 [ffff8818d3aefe08] svc_process_common at ffffffffc02017f3 [sunrpc] #6 [ffff8818d3aefe70] svc_process at ffffffffc0201ce3 [sunrpc] #7 [ffff8818d3aefe98] nfsd at ffffffffc027b117 [nfsd] #8 [ffff8818d3aefec8] kthread at ffffffff810b88c1 #9 [ffff8818d3aeff50] ret_from_fork at ffffffff816d1607 The troublemake elem: crash> lock_manager ffff881dc0c38298 struct lock_manager { list = { next = 0xffff881dc0c38298, prev = 0xffff881dc0c38298 }, block_opens = false } Fixes: c87fb4a ("lockd: NLM grace period shouldn't block NFSv4 opens") Signed-off-by: Cheng Lin <[email protected]> Signed-off-by: Yi Wang <[email protected]> Signed-off-by: Chuck Lever <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit c5c97cadd7ed13381cb6b4bef5c841a66938d350 ] The ubsan reported the following error. It was because sample's raw data missed u32 padding at the end. So it broke the alignment of the array after it. The raw data contains an u32 size prefix so the data size should have an u32 padding after 8-byte aligned data. 27: Sample parsing :util/synthetic-events.c:1539:4: runtime error: store to misaligned address 0x62100006b9bc for type '__u64' (aka 'unsigned long long'), which requires 8 byte alignment 0x62100006b9bc: note: pointer points here 00 00 00 00 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ^ #0 0x561532a9fc96 in perf_event__synthesize_sample util/synthetic-events.c:1539:13 #1 0x5615327f4a4f in do_test tests/sample-parsing.c:284:8 #2 0x5615327f3f50 in test__sample_parsing tests/sample-parsing.c:381:9 #3 0x56153279d3a1 in run_test tests/builtin-test.c:424:9 #4 0x56153279c836 in test_and_print tests/builtin-test.c:454:9 #5 0x56153279b7eb in __cmd_test tests/builtin-test.c:675:4 #6 0x56153279abf0 in cmd_test tests/builtin-test.c:821:9 #7 0x56153264e796 in run_builtin perf.c:312:11 #8 0x56153264cf03 in handle_internal_command perf.c:364:8 #9 0x56153264e47d in run_argv perf.c:408:2 #10 0x56153264c9a9 in main perf.c:538:3 #11 0x7f137ab6fbbc in __libc_start_main (/lib64/libc.so.6+0x38bbc) #12 0x561532596828 in _start ... SUMMARY: UndefinedBehaviorSanitizer: misaligned-pointer-use util/synthetic-events.c:1539:4 in Fixes: 045f8cd ("perf tests: Add a sample parsing test") Signed-off-by: Namhyung Kim <[email protected]> Acked-by: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit e8bd76ede155fd54d8c41d045dda43cd3174d506 ] kernel panic trace looks like: #5 [ffffb9e08698fc80] do_page_fault at ffffffffb666e0d7 #6 [ffffb9e08698fcb0] page_fault at ffffffffb70010fe [exception RIP: amp_read_loc_assoc_final_data+63] RIP: ffffffffc06ab54f RSP: ffffb9e08698fd68 RFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff8c8845a5a000 RCX: 0000000000000004 RDX: 0000000000000000 RSI: ffff8c8b9153d000 RDI: ffff8c8845a5a000 RBP: ffffb9e08698fe40 R8: 00000000000330e0 R9: ffffffffc0675c94 R10: ffffb9e08698fe58 R11: 0000000000000001 R12: ffff8c8b9cbf6200 R13: 0000000000000000 R14: 0000000000000000 R15: ffff8c8b2026da0b ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #7 [ffffb9e08698fda8] hci_event_packet at ffffffffc0676904 [bluetooth] #8 [ffffb9e08698fe50] hci_rx_work at ffffffffc06629ac [bluetooth] #9 [ffffb9e08698fe98] process_one_work at ffffffffb66f95e7 hcon->amp_mgr seems NULL triggered kernel panic in following line inside function amp_read_loc_assoc_final_data set_bit(READ_LOC_AMP_ASSOC_FINAL, &mgr->state); Fixed by checking NULL for mgr. Signed-off-by: Gopal Tiwari <[email protected]> Signed-off-by: Marcel Holtmann <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

Dan Carpenter and others added 30 commits November 25, 2019 15:53

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Merging linux stable on branch android-q #8

Merging linux stable on branch android-q #8

radcolor commented Dec 1, 2019

Merging linux stable on branch android-q #8

Merging linux stable on branch android-q #8

Conversation

radcolor commented Dec 1, 2019