Release Notes

2.2.0

Features

Experimental support for shortname aliasing has been added. This is not enabled by default, but can be turned on by setting the environment variable CONTAINERS_SHORT_NAME_ALIASING to on. Documentation is available here.
Initial support has been added for the podman network connect and podman network disconnect commands, which allow existing containers to modify what networks they are connected to. At present, these commands can only be used on running containers that did not specify --network=none when they were created.
The podman run command now supports the --network-alias option to set network aliases (additional names the container can be accessed at from other containers via DNS if the dnsname CNI plugin is in use). Aliases can also be added and removed using the new podman network connect and podman network disconnect commands. Please note that this requires a new release (v1.1.0) of the dnsname plugin, and will only work on newly-created CNI networks.
The podman generate kube command now features support for exporting container's memory and CPU limits (#7855).
The podman play kube command now features support for setting CPU and Memory limits for containers (#7742).
The podman play kube command now supports persistent volumes claims using Podman named volumes.
The podman play kube command now supports Kubernetes configmaps via the --configmap option (#7567).
The podman play kube command now supports a --log-driver option to set the log driver for created containers.
The podman play kube command now supports a --start option, enabled by default, to start the pod after creating it. This allows for podman play kube to be more easily used in systemd unitfiles.
The podman network create command now supports the --ipv6 option to enable dual-stack IPv6 networking for created networks (#7302).
The podman inspect command can now inspect pods, networks, and volumes, in addition to containers and images (#6757).
The --mount option for podman run and podman create now supports a new type, image, to mount the contents of an image into the container at a given location.
The Bash and ZSH completions have been completely reworked and have received significant enhancements! Additionally, support for Fish completions and completions for the podman-remote executable have been added.
The --log-opt option for podman create and podman run now supports the max-size option to set the maximum size for a container's logs (#7434).
The --network option to the podman pod create command now allows pods to be configured to use slirp4netns networking, even when run as root (#6097).
The podman pod stop, podman pod pause, podman pod unpause, and podman pod kill commands now work on multiple containers in parallel and should be significantly faster.
The podman search command now supports a --list-tags option to list all available tags for a single image in a single repository.
The podman search command can now output JSON using the --format=json option.
The podman diff and podman mount commands now work with all containers in the storage library, including those not created by Podman. This allows them to be used with Buildah and CRI-O containers.
The podman container exists command now features a --external option to check if a container exists not just in Podman, but also in the storage library. This will allow Podman to identify Buildah and CRI-O containers.
The --tls-verify and --authfile options have been enabled for use with remote Podman.
The /etc/hosts file now includes the container's name and hostname (both pointing to localhost) when the container is run with --net=none (#8095).
The podman events command now supports filtering events based on the labels of the container they occurred on using the --filter label=key=value option.
The podman volume ls command now supports filtering volumes based on their labels using the --filter label=key=value option.
The --volume and --mount options to podman run and podman create now support two new mount propagation options, unbindable and runbindable.
The name and id filters for podman pod ps now match based on a regular expression, instead of requiring an exact match.
The podman pod ps command now supports a new filter status, that matches pods in a certain state.

Changes

The podman network rm --force command will now also remove pods that are using the network (#7791).
The podman volume rm, podman network rm, and podman pod rm commands now return exit code 1 if the object specified for removal does not exist, and exit code 2 if the object is in use and the --force option was not given.
If /dev/fuse is passed into Podman containers as a device, Podman will open it before starting the container to ensure that the kernel module is loaded on the host and the device is usable in the container.
Global Podman options that were not supported with remote operation have been removed from podman-remote (e.g. --cgroup-manager, --storage-driver).
Many errors have been changed to remove repetition and be more clear as to what has gone wrong.
The --storage option to podman rm is now enabled by default, with slightly changed semantics. If the given container does not exist in Podman but does exist in the storage library, it will be removed even without the --storage option. If the container exists in Podman it will be removed normally. The --storage option for podman rm is now deprecated and will be removed in a future release.
The --storage option to podman ps has been renamed to --external. An alias has been added so the old form of the option will continue to work.
Podman now delays the SIGTERM and SIGINT signals during container creation to ensure that Podman is not stopped midway through creating a container resulting in potential resource leakage (#7941).
The podman save command now strips signatures from images it is exporting, as the formats we export to do not support signatures (#7659).
A new Degraded state has been added to pods. Pods that have some, but not all, of their containers running are now considered to be Degraded instead of Running.
Podman will now print a warning when conflicting network options related to port forwarding (e.g. --publish and --net=host) are specified when creating a container.
The --restart on-failure and --rm options for containers no longer conflict. When both are specified, the container will be restarted if it exits with a non-zero error code, and removed if it exits cleanly (#7906).
Remote Podman will no longer use settings from the client's containers.conf; defaults will instead be provided by the server's containers.conf (#7657).
The podman network rm command now has a new alias, podman network remove (#8402).

Bugfixes

Fixed a bug where podman load on the remote client did not error when attempting to load a directory, which is not yet supported for remote use.
Fixed a bug where rootless Podman could hang when the newuidmap binary was not installed (#7776).
Fixed a bug where the --pull option to podman run, podman create, and podman build did not match Docker's behavior.
Fixed a bug where sysctl settings from the containers.conf configuration file were applied, even if the container did not join the namespace associated with a sysctl.
Fixed a bug where Podman would not return the text of errors encountered when trying to run a healthcheck for a container.
Fixed a bug where Podman was accidentally setting the containers environment variable in addition to the expected container environment variable.
Fixed a bug where rootless Podman using CNI networking did not properly clean up DNS entries for removed containers (#7789).
Fixed a bug where the podman untag --all command was not supported with remote Podman.
Fixed a bug where the podman system service command could time out even if active attach connections were present (#7826).
Fixed a bug where the podman system service command would sometimes never time out despite no active connections being present.
Fixed a bug where Podman's handling of capabilities, specifically inheritable, did not match Docker's.
Fixed a bug where podman run would fail if the image specified was a manifest list and had already been pulled (#7798).
Fixed a bug where Podman did not take search registries into account when looking up images locally (#6381).
Fixed a bug where the podman manifest inspect command would fail for images that had already been pulled (#7726).
Fixed a bug where rootless Podman would not add supplemental GIDs to containers when when a user, but not a group, was set via the --user option to podman create and podman run and sufficient GIDs were available to add the groups (#7782).
Fixed a bug where remote Podman commands did not properly handle cases where the user gave a name that could also be a short ID for a pod or container (#7837).
Fixed a bug where podman image prune could leave images ready to be pruned after podman image prune was run (#7872).
Fixed a bug where the podman logs command with the journald log driver would not read all available logs (#7476).
Fixed a bug where the --rm and --restart options to podman create and podman run did not conflict when a restart policy that is not on-failure was chosen (#7878).
Fixed a bug where the --format "table {{ .Field }}" option to numerous Podman commands ceased to function on Podman v2.0 and up.
Fixed a bug where pods did not properly share an SELinux label between their containers, resulting in containers being unable to see the processes of other containers when the pod shared a PID namespace (#7886).
Fixed a bug where the --namespace option to podman ps did not work with the remote client (#7903).
Fixed a bug where rootless Podman incorrectly calculated the number of UIDs available in the container if multiple different ranges of UIDs were specified.
Fixed a bug where the /etc/hosts file would not be correctly populated for containers in a user namespace (#7490).
Fixed a bug where the podman network create and podman network remove commands could race when run in parallel, with unpredictable results (#7807).
Fixed a bug where the -p option to podman run, podman create, and podman pod create would, when given only a single number (e.g. -p 80), assign the same port for both host and container, instead of generating a random host port (#7947).
Fixed a bug where Podman containers did not properly store the cgroup manager they were created with, causing them to stop functioning after the cgroup manager was changed in containers.conf or with the --cgroup-manager option (#7830).
Fixed a bug where the podman inspect command did not include information on the CNI networks a container was connected to if it was not running.
Fixed a bug where the podman attach command would not print a newline after detaching from the container (#7751).
Fixed a bug where the HOME environment variable was not set properly in containers when the --userns=keep-id option was set (#8004).
Fixed a bug where the podman container restore command could panic when the container in question was in a pod (#8026).
Fixed a bug where the output of the podman image trust show --raw command was not properly formatted.
Fixed a bug where the podman runlabel command could panic if a label to run was not given (#8038).
Fixed a bug where the podman run and podman start --attach commands would exit with an error when the user detached manually using the detach keys on remote Podman (#7979).
Fixed a bug where rootless CNI networking did not use the dnsname CNI plugin if it was not available on the host, despite it always being available in the container used for rootless networking (#8040).
Fixed a bug where Podman did not properly handle cases where an OCI runtime is specified by its full path, and could revert to using another OCI runtime with the same binary path that existed in the system $PATH on subsequent invocations.
Fixed a bug where the --net=host option to podman create and podman run would cause the /etc/hosts file to be incorrectly populated (#8054).
Fixed a bug where the podman inspect command did not include container network information when the container shared its network namespace (IE, joined a pod or another container's network namespace via --net=container:...) (#8073).
Fixed a bug where the podman ps command did not include information on all ports a container was publishing.
Fixed a bug where the podman build command incorrectly forwarded STDIN into build containers from RUN instructions.
Fixed a bug where the podman wait command's --interval option did not work when units were not specified for the duration (#8088).
Fixed a bug where the --detach-keys and --detach options could be passed to podman create despite having no effect (and not making sense in that context).
Fixed a bug where Podman could not start containers if running on a system without a /etc/resolv.conf file (which occurs on some WSL2 images) (#8089).
Fixed a bug where the --extract option to podman cp was nonfunctional.
Fixed a bug where the --cidfile option to podman run would, when the container was not run with --detach, only create the file after the container exited (#8091).
Fixed a bug where the podman images and podman images -a commands could panic and not list any images when certain improperly-formatted images were present in storage (#8148).
Fixed a bug where the podman events command could, when the journald events backend was in use, become nonfunctional when a badly-formatted event or a log message that container certain string was present in the journal (#8125).
Fixed a bug where remote Podman would, when using SSH transport, not authenticate to the server using hostkeys when connecting on a port other than 22 (#8139).
Fixed a bug where the podman attach command would not exit when containers stopped (#8154).
Fixed a bug where Podman did not properly clean paths before verifying them, resulting in Podman refusing to start if the root or temporary directories were specified with extra trailing / characters (#8160).
Fixed a bug where remote Podman did not support hashed hostnames in the known_hosts file on the host for establishing connections (#8159).
Fixed a bug where the podman image exists command would return non-zero (false) when multiple potential matches for the given name existed.
Fixed a bug where the podman manifest inspect command on images that are not manifest lists would error instead of inspecting the image (#8023).
Fixed a bug where the podman system service command would fail if the directory the Unix socket was to be created inside did not exist (#8184).
Fixed a bug where pods that shared the IPC namespace (which is done by default) did not share a /dev/shm filesystem between all containers in the pod (#8181).
Fixed a bug where filters passed to podman volume list were not inclusive (#6765).
Fixed a bug where the podman volume create command would fail when the volume's data directory already existed (as might occur when a volume was not completely removed) (#8253).
Fixed a bug where the podman run and podman create commands would deadlock when trying to create a container that mounted the same named volume at multiple locations (e.g. podman run -v testvol:/test1 -v testvol:/test2) (#8221).
Fixed a bug where the parsing of the --net option to podman build was incorrect (#8322).
Fixed a bug where the podman build command would print the ID of the built image twice when using remote Podman (#8332).
Fixed a bug where the podman stats command did not show memory limits for containers (#8265).
Fixed a bug where the podman pod inspect command printed the static MAC address of the pod in a non-human-readable format (#8386).
Fixed a bug where the --tls-verify option of the podman play kube command had its logic inverted (false would enforce the use of TLS, true would disable it).
Fixed a bug where the podman network rm command would error when trying to remove macvlan networks and rootless CNI networks (#8491).
Fixed a bug where Podman was not setting sane defaults for missing XDG_ environment variables.
Fixed a bug where remote Podman would check if volume paths to be mounted in the container existed on the host, not the server (#8473).
Fixed a bug where the podman manifest create and podman manifest add commands on local images would drop any images in the manifest not pulled by the host.
Fixed a bug where networks made by podman network create did not include the tuning plugin, and as such did not support setting custom MAC addresses (#8385).
Fixed a bug where container healthchecks did not use $PATH when searching for the Podman executable to run the healthcheck.
Fixed a bug where the --ip-range option to podman network create did not properly handle non-classful subnets when calculating the last usable IP for DHCP assignment (#8448).
Fixed a bug where the podman container ps alias for podman ps was missing (#8445).

API

The Compat Create endpoint for Container has received a major refactor to share more code with the Libpod Create endpoint, and should be significantly more stable.
A Compat endpoint for exporting multiple images at once, GET /images/get, has been added (#7950).
The Compat Network Connect and Network Disconnect endpoints have been added.
Endpoints that deal with image registries now support a X-Registry-Config header to specify registry authentication configuration.
The Compat Create endpoint for images now properly supports specifying images by digest.
The Libpod Build endpoint for images now supports an httpproxy query parameter which, if set to true, will forward the server's HTTP proxy settings into the build container for RUN instructions.
The Libpod Untag endpoint for images will now remove all tags for the given image if no repository and tag are specified for removal.
Fixed a bug where the Ping endpoint misspelled a header name (Libpod-Buildha-Version instead of Libpod-Buildah-Version).
Fixed a bug where the Ping endpoint sent an extra newline at the end of its response where Docker did not.
Fixed a bug where the Compat Logs endpoint for containers did not send a newline character after each log line.
Fixed a bug where the Compat Logs endpoint for containers would mangle line endings to change newline characters to add a preceding carriage return (#7942).
Fixed a bug where the Compat Inspect endpoint for Containers did not properly list the container's stop signal (#7917).
Fixed a bug where the Compat Inspect endpoint for Containers formatted the container's create time incorrectly (#7860).
Fixed a bug where the Compat Inspect endpoint for Containers did not include the container's Path, Args, and Restart Count.
Fixed a bug where the Compat Inspect endpoint for Containers prefixed added and dropped capabilities with CAP_ (Docker does not do so).
Fixed a bug where the Compat Info endpoint for the Engine did not include configured registries.
Fixed a bug where the server could panic if a client closed a connection midway through an image pull (#7896).
Fixed a bug where the Compat Create endpoint for volumes returned an error when a volume with the same name already existed, instead of succeeding with a 201 code (#7740).
Fixed a bug where a client disconnecting from the Libpod or Compat events endpoints could result in the server using 100% CPU (#7946).
Fixed a bug where the "no such image" error message sent by the Compat Inspect endpoint for Images returned a 404 status code with an error that was improperly formatted for Docker compatibility.
Fixed a bug where the Compat Create endpoint for networks did not properly set a default for the driver parameter if it was not provided by the client.
Fixed a bug where the Compat Inspect endpoint for images did not populate the RootFS field of the response.
Fixed a bug where the Compat Inspect endpoint for images would omit the ParentId field if the image had no parent, and the Created field if the image did not have a creation time.
Fixed a bug where the Compat Remove endpoint for Networks did not support the Force query parameter.

Misc

Updated Buildah to v1.18.0
Updated the containers/storage library to v1.24.1
Updated the containers/image library to v5.8.1
Updated the containers/common library to v0.27.0

2.1.1

Changes

The podman info command now includes the cgroup manager Podman is using.

Bugfixes

Fixed a bug where Podman would not build with the varlink build tag enabled.
Fixed a bug where the podman save command could, when asked to save multiple images, write its progress bar to the archive instead of the terminal, producing a corrupted archive.
Fixed a bug where the json-file log driver did not write logs.
Fixed a bug where podman-remote start --attach did not properly handle detaching using the detach keys.
Fixed a bug where podman pod ps --filter label=... did not work.
Fixed a bug where the podman build command did not respect the --runtime flag.

API

The REST API now includes a Server header in all responses.
Fixed a bug where the Libpod and Compat Attach endpoints could terminate early, before sending all output from the container.
Fixed a bug where the Compat Create endpoint for containers did not properly handle the Interactive parameter.
Fixed a bug where the Compat Kill endpoint for containers could continue to run after a fatal error.
Fixed a bug where the Limit parameter of the Compat List endpoint for Containers did not properly handle a limit of 0 (returning nothing, instead of all containers) (#7722).
The Libpod Stats endpoint for containers is being deprecated and will be replaced by a similar endpoint with additional features in a future release.

2.1.0

Features

A new command, podman image mount, has been added. This allows for an image to be mounted, read-only, to inspect its contents without creating a container from it (#1433).
The podman save and podman load commands can now create and load archives containing multiple images (#2669).
Rootless Podman now supports all podman network commands, and rootless containers can now be joined to networks.
The performance of podman build on ADD and COPY instructions has been greatly improved, especially when a .dockerignore is present.
The podman run and podman create commands now support a new mode for the --cgroups option, --cgroups=split. Podman will create two cgroups under the cgroup it was launched in, one for the container and one for Conmon. This mode is useful for running Podman in a systemd unit, as it ensures that all processes are retained in systemd's cgroup hierarchy (#6400).
The podman run and podman create commands can now specify options to slirp4netns by using the --network option as follows: --net slirp4netns:opt1,opt2. This allows for, among other things, switching the port forwarder used by slirp4netns away from rootlessport.
The podman ps command now features a new option, --storage, to show containers from Buildah, CRI-O and other applications.
The podman run and podman create commands now feature a --sdnotify option to control the behavior of systemd's sdnotify with containers, enabling improved support for Podman in Type=notify units.
The podman run command now features a --preserve-fds option to pass file descriptors from the host into the container (#6458).
The podman run and podman create commands can now create overlay volume mounts, by adding the :O option to a bind mount (e.g. -v /test:/test:O). Overlay volume mounts will mount a directory into a container from the host and allow changes to it, but not write those changes back to the directory on the host.
The podman play kube command now supports the Socket HostPath type (#7112).
The podman play kube command now supports read-only mounts.
The podman play kube command now supports setting labels on pods from Kubernetes metadata labels.
The podman play kube command now supports setting container restart policy (#7656).
The podman play kube command now properly handles HostAlias entries.
The podman generate kube command now adds entries to /etc/hosts from --host-add generated YAML as HostAlias entries.
The podman play kube and podman generate kube commands now properly support shareProcessNamespace to share the PID namespace in pods.
The podman volume ls command now supports the dangling filter to identify volumes that are dangling (not attached to any container).
The podman run and podman create commands now feature a --umask option to set the umask of the created container.
The podman create and podman run commands now feature a --tz option to set the timezone within the container (#5128).
Environment variables for Podman can now be added in the containers.conf configuration file.
The --mount option of podman run and podman create now supports a new mount type, type=devpts, to add a devpts mount to the container. This is useful for containers that want to mount /dev/ from the host into the container, but still create a terminal.
The --security-opt flag to podman run and podman create now supports a new option, proc-opts, to specify options for the container's /proc filesystem.
Podman with the crun OCI runtime now supports a new option to podman run and podman create, --cgroup-conf, which allows for advanced configuration of cgroups on cgroups v2 systems.
The podman create and podman run commands now support a --override-variant option, to override the architecture variant of the image that will be pulled and ran.
A new global option has been added to Podman, --runtime-flags, which allows for setting flags to use when the OCI runtime is called.
The podman manifest add command now supports the --cert-dir, --auth-file, --creds, and --tls-verify options.

Security

This release resolves CVE-2020-14370, in which environment variables could be leaked between containers created using the Varlink API.

Changes

Podman will now retry pulling an image 3 times if a pull fails due to network errors.
The podman exec command would previously print error messages (e.g. exec session exited with non-zero exit code -1) when the command run exited with a non-0 exit code. It no longer does this. The podman exec command will still exit with the same exit code as the command run in the container did.
Error messages when creating a container or pod with a name that is already in use have been improved.
For read-only containers running systemd init, Podman creates a tmpfs filesystem at /run. This was previously limited to 65k in size and mounted noexec, but is now unlimited size and mounted exec.
The podman system reset command no longer removes configuration files for rootless Podman.

Bugfixes

Fixed a bug where Podman would not add an entry to /etc/hosts for a container if it joined another container's network namespace (#66782).
Fixed a bug where podman save --format oci-dir saved the image in an incorrect format (#6544).
Fixed a bug where privileged containers would still configure an AppArmor profile.
Fixed a bug where the --format option of podman system df was not properly interpreting format codes that included backslashes (#7149).
Fixed a bug where rootless Podman would ignore errors from newuidmap and newgidmap, even if /etc/subuid and /etc/subgid contained valid mappings for the user running Podman.
Fixed a bug where the podman commit command did not properly handle single-character image names (#7114).
Fixed a bug where the output of podman ps --format=json did not include a Status field (#6980).
Fixed a bug where input to the --log-level option was no longer case-insensitive.
Fixed a bug where podman images could segfault when an image pull was aborted while incomplete, leaving an image without a manifest (#7444).
Fixed a bug where rootless Podman would try to create the ~/.config directory when it did not exist, despite not placing any configuration files inside the directory.
Fixed a bug where the output of podman system df was inconsistent based on whether the -v option was specified (#7405).
Fixed a bug where --security-opt apparmor=unconfined would error if Apparmor was not enabled on the system (#7545).
Fixed a bug where running podman stop on multiple containers starting with --rm could sometimes cause no such container errors (#7384).
Fixed a bug where podman-remote would still try to contact the server when displaying help information about subcommands.
Fixed a bug where the podman build --logfile command would segfault.
Fixed a bug where the podman generate systemd command did not properly handle containers which were created with a name given as --name=$NAME instead of --name $NAME (#7157).
Fixed a bug where the podman ps was ignoring the --latest flag.
Fixed a bug where the podman-remote kill command would hang when a signal that did not kill the container was specified (#7135).
Fixed a bug where the --oom-score-adj option of podman run and podman create was nonfunctional.
Fixed a bug where the --display option of podman runlabel was nonfunctional.
Fixed a bug where the podman runlabel command would not pull images that did not exist locally on the system.
Fixed a bug where podman-remote run would not exit with the correct code with the container was removed by a podman-remote rm -f while podman-remote run was still running (#7117).
Fixed a bug where the podman-remote run --rm command would error attempting to remove containers that had already been removed (e.g. by podman-remote rm --force) (#7340).
Fixed a bug where podman --user with a numeric user and podman run --userns=keepid could create users in /etc/passwd in the container that belong to groups without a corresponding entry in /etc/group (#7389).
Fixed a bug where podman run --userns=keepid could create entries in /etc/passwd with a UID that was already in use by another user (#7503).
Fixed a bug where podman --user with a numeric user and podman run --userns=keepid could create users that could not be logged into (#7499).
Fixed a bug where trying to join another container's user namespace with --userns container:$ID would fail (#7547).
Fixed a bug where the podman play kube command would trim underscores from container names (#7020).
Fixed a bug where the podman attach command would not show output when attaching to a container with a terminal (#6523).
Fixed a bug where the podman system df command could be extremely slow when large quantities of images were present (#7406).
Fixed a bug where podman images -a would break if any image pulled by digest was present in the store (#7651).
Fixed a bug where the --mount option to podman run and podman create required the type= parameter to be passed first (#7628).
Fixed a bug where the --infra-command parameter to podman pod create was nonfunctional.
Fixed a bug where podman auto-update would fail for any container started with --pull=always (#7407).
Fixed a bug where the podman wait command would only accept a single argument.
Fixed a bug where the parsing of the --volumes-from option to podman run and podman create was broken, making it impossible to use multiple mount options at the same time (#7701).
Fixed a bug where the podman exec command would not join executed processes to the container's supplemental groups if the container was started with both the --user and --group-add options.
Fixed a bug where the --iidfile option to podman-remote build was nonfunctional.

API

The Libpod API version has been bumped to v2.0.0 due to a breaking change in the Image List API.
Docker-compatible Volume Endpoints (Create, Inspect, List, Remove, Prune) are now available!
Added an endpoint for generating systemd unit files for containers.
The last parameter to the Libpod container list endpoint now has an alias, limit (#6413).
The Libpod image list API new returns timestamps in Unix format, as integer, as opposed to as strings
The Compat Inspect endpoint for containers now includes port information in NetworkSettings.
The Compat List endpoint for images now features limited support for the (deprecated) filter query parameter (#6797).
Fixed a bug where the Compat Create endpoint for containers was not correctly handling bind mounts.
Fixed a bug where the Compat Create endpoint for containers would not return a 404 when the requested image was not present.
Fixed a bug where the Compat Create endpoint for containers did not properly handle Entrypoint and Command from images.
Fixed a bug where name history information was not properly added in the Libpod Image List endpoint.
Fixed a bug where the Libpod image search endpoint improperly populated the Description field of responses.
Added a noTrunc option to the Libpod image search endpoint.
Fixed a bug where the Pod List API would return null, instead of an empty array, when no pods were present (#7392).
Fixed a bug where endpoints that hijacked would do perform the hijack too early, before being ready to send and receive data (#7195).
Fixed a bug where Pod endpoints that can operate on multiple containers at once (e.g. Kill, Pause, Unpause, Stop) would not forward errors from individual containers that failed.
The Compat List endpoint for networks now supports filtering results (#7462).
Fixed a bug where the Top endpoint for pods would return both a 500 and 404 when run on a nonexistent pod.
Fixed a bug where Pull endpoints did not stream progress back to the client.
The Version endpoints (Libpod and Compat) now provide version in a format compatible with Docker.
All non-hijacking responses to API requests should not include headers with the version of the server.
Fixed a bug where Libpod and Compat Events endpoints did not send response headers until the first event occurred (#7263).
Fixed a bug where the Build endpoints (Compat and Libpod) did not stream progress to the client.
Fixed a bug where the Stats endpoints (Compat and Libpod) did not properly handle clients disconnecting.
Fixed a bug where the Ignore parameter to the Libpod Stop endpoint was not performing properly.
Fixed a bug where the Compat Logs endpoint for containers did not stream its output in the correct format (#7196).

Misc

Updated Buildah to v1.16.1
Updated the containers/storage library to v1.23.5
Updated the containers/image library to v5.6.0
Updated the containers/common library to v0.22.0

2.0.6

Bugfixes

Fixed a bug where running systemd in a container on a cgroups v1 system would fail.
Fixed a bug where /etc/passwd could be re-created every time a container is restarted if the container's /etc/passwd did not contain an entry for the user the container was started as.
Fixed a bug where containers without an /etc/passwd file specifying a non-root user would not start.
Fixed a bug where the --remote flag would sometimes not make remote connections and would instead attempt to run Podman locally.

Misc

Updated the containers/common library to v0.14.10

2.0.5

Features

Rootless Podman will now add an entry to /etc/passwd for the user who ran Podman if run with --userns=keep-id.
The podman system connection command has been reworked to support multiple connections, and reenabled for use!
Podman now has a new global flag, --connection, to specify a connection to a remote Podman API instance.

Changes

Podman's automatic systemd integration (activated by the --systemd=true flag, set by default) will now activate for containers using /usr/local/sbin/init as their command, instead of just /usr/sbin/init and /sbin/init (and any path ending in systemd).
Seccomp profiles specified by the --security-opt seccomp=... flag to podman create and podman run will now be honored even if the container was created using --privileged.

Bugfixes

Fixed a bug where the podman play kube would not honor the hostIP field for port forwarding (#5964).
Fixed a bug where the podman generate systemd command would panic on an invalid restart policy being specified (#7271).
Fixed a bug where the podman images command could take a very long time (several minutes) to complete when a large number of images were present.
Fixed a bug where the podman logs command with the --tail flag would not work properly when a large amount of output would be printed (#7230).
Fixed a bug where the podman exec command with remote Podman would not return a non-zero exit code when the exec session failed to start (e.g. invoking a nonexistent command) (#6893).
Fixed a bug where the podman load command with remote Podman would did not honor user-specified tags (#7124).
Fixed a bug where the podman system service command, when run as a non-root user by Systemd, did not properly handle the Podman pause process and would not restart properly as a result (#7180).
Fixed a bug where the --publish flag to podman create, podman run, and podman pod create did not properly handle a host IP of 0.0.0.0 (attempting to bind to literal 0.0.0.0, instead of all IPs on the system) (#7104).
Fixed a bug where the podman start --attach command would not print the container's exit code when the command exited due to the container exiting.
Fixed a bug where the podman rm command with remote Podman would not remove volumes, even if the --volumes flag was specified (#7128).
Fixed a bug where the podman run command with remote Podman and the --rm flag could exit before the container was fully removed.
Fixed a bug where the --pod new:... flag to podman run and podman create would create a pod that did not share any namespaces.
Fixed a bug where the --preserve-fds flag to podman run and podman exec could close the wrong file descriptors while trying to close user-provided descriptors after passing them into the container.
Fixed a bug where default environment variables ($PATH and $TERM) were not set in containers when not provided by the image.
Fixed a bug where pod infra containers were not properly unmounted after exiting.
Fixed a bug where networks created with podman network create with an IPv6 subnet did not properly set an IPv6 default route.
Fixed a bug where the podman save command would not work properly when its output was piped to another command (#7017).
Fixed a bug where containers using a systemd init on a cgroups v1 system could leak mounts under /sys/fs/cgroup/systemd to the host.
Fixed a bug where podman build would not generate an event on completion (#7022).
Fixed a bug where the podman history command with remote Podman printed incorrect creation times for layers (#7122).
Fixed a bug where Podman would not create working directories specified by the container image if they did not exist.
Fixed a bug where Podman did not clear CMD from the container image if the user overrode ENTRYPOINT (#7115).
Fixed a bug where error parsing image names were not fully reported (part of the error message containing the exact issue was dropped).
Fixed a bug where the podman images command with remote Podman did not support printing image tags in Go templates supplied to the --format flag (#7123).
Fixed a bug where the podman rmi --force command would not attempt to unmount containers it was removing, which could cause a failure to remove the image.
Fixed a bug where the podman generate systemd --new command could incorrectly quote arguments to Podman that contained whitespace, leading to nonfunctional unit files (#7285).
Fixed a bug where the podman version command did not properly include build time and Git commit.
Fixed a bug where running systemd in a Podman container on a system that did not use the systemd cgroup manager would fail (#6734).
Fixed a bug where capabilities from --cap-add were not properly added when a container was started as a non-root user via --user.
Fixed a bug where Pod infra containers were not properly cleaned up when they stopped, causing networking issues (#7103).

API

Fixed a bug where the libpod and compat Build endpoints did not accept the application/tar content type (instead only accepting application/x-tar) (#7185).
Fixed a bug where the libpod Exists endpoint would attempt to write a second header in some error conditions (#7197).
Fixed a bug where compat and libpod Network Inspect and Network Remove endpoints would return a 500 instead of 404 when the requested network was not found.
Added a versioned _ping endpoint (e.g. http://localhost/v1.40/_ping).
Fixed a bug where containers started through a systemd-managed instance of the REST API would be shut down when podman system service shut down due to its idle timeout (#7294).
Added stronger parameter verification for the libpod Network Create endpoint to ensure subnet mask is a valid value.
The Pod URL parameter to the Libpod Container List endpoint has been deprecated; the information previously gated by the Pod boolean will now be included in the response unconditionally.

Misc

Updated Buildah to v1.15.1
Updated containers/image library to v5.5.2

2.0.4

Bugfixes

Fixed a bug where the output of podman image search did not populate the Description field as it was mistakenly assigned to the ID field.
Fixed a bug where podman build - and podman build on an HTTP target would fail.
Fixed a bug where rootless Podman would improperly chown the copied-up contents of anonymous volumes (#7130).
Fixed a bug where Podman would sometimes HTML-escape special characters in its CLI output.
Fixed a bug where the podman start --attach --interactive command would print the container ID of the container attached to when exiting (#7068).
Fixed a bug where podman run --ipc=host --pid=host would only set --pid=host and not --ipc=host (#7100).
Fixed a bug where the --publish argument to podman run, podman create and podman pod create would not allow binding the same container port to more than one host port (#7062).
Fixed a bug where incorrect arguments to podman images --format could cause Podman to segfault.
Fixed a bug where podman rmi --force on an image ID with more than one name and at least one container using the image would not completely remove containers using the image (#7153).
Fixed a bug where memory usage in bytes and memory use percentage were swapped in the output of podman stats --format=json.

API

Fixed a bug where the libpod and compat events endpoints would fail if no filters were specified (#7078).
Fixed a bug where the CgroupVersion field in responses from the compat Info endpoint was prefixed by "v" (instead of just being "1" or "2", as is documented).

2.0.3

Features

The podman search command now allows wildcards in search terms.
The podman play kube command now supports the IfNotPresent pull type.

Changes

The --disable-content-trust flag has been added to Podman for Docker compatibility. This is a Docker-specific option and has no effect in Podman; it is provided only to ensure command line compatibility for scripts (#7034).
Setting a static IP address or MAC address for rootless containers and pods now causes an error; previously, they were silently ignored.
The /sys/dev folder is now masked in containers to prevent a potential information leak from the host.

Bugfixes

Fixed a bug where rootless Podman would select the wrong cgroup manager on cgroups v1 systems where the user in question had an active systemd user session (#6982).
Fixed a bug where systems with Apparmor could not run privileged containers (#6933).
Fixed a bug where ENTRYPOINT and CMD from images were improperly handled by podman play kube (#6995).
Fixed a bug where the --pids-limit flag to podman create and podman run was parsed incorrectly and was unusable (#6908).
Fixed a bug where the podman system df command would error if untagged images were present (#7015).
Fixed a bug where the podman images command would display incorrect tags if a port number was included in the repository.
Fixed a bug where Podman did not set a default umask and default rlimits (#6989).
Fixed a bug where protocols in port mappings were not recognized unless they were lower-case (#6948).
Fixed a bug where information on pod infra containers was not included in the output of podman pod inspect.
Fixed a bug where Podman's systemd detection (activated by the enabled-by-default --systemd=true flag) would not flag a container for systemd mode if systemd was part of the entrypoint, not the command (#6920).
Fixed a bug where podman start --attach was not defaulting --sig-proxy to true (#6928).
Fixed a bug where podman inspect would show an incorrect command (podman system service, the command used to start the server) for containers created by a remote Podman client.
Fixed a bug where the podman exec command with the remote client would not print output if the -t or -i flags where not provided.
Fixed a bug where some variations of the --format {{ json . }} to podman info (involving added or removed whitespace) would not be accepted (#6927).
Fixed a bug where Entrypoint could not be cleared at the command line (if unset via --entrypoint="", it would be reset to the image's entrypoint) (#6935).

API

Fixed a bug where the events endpoints (both libpod and compat) could potentially panic on parsing filters.
Fixed a bug where the compat Create endpoint for containers did not properly handle Entrypoint and Command.
Fixed a bug where the Logs endpoint for containers (both libpod and compat) would not properly handle client disconnect, resulting in high CPU usage.
The type of filters on the compat events endpoint has been adjusted to match Docker's implementation (#6899).
The idle connection counter now properly handles hijacked connections.
All endpoints that hijack will now properly print headers per RFC 7230 standards.

Misc

Updated containers/common to v0.14.6

2.0.2

Changes

The podman system connection command has been temporarily disabled, as it was not functioning as expected.

Bugfixes

Fixed a bug where the podman ps command would not truncate long container commands, resulting in display issues as the column could become extremely wide (the --no-trunc flag can be used to print the full command).
Fixed a bug where podman pod commands operating on multiple containers (e.g. podman pod stop and podman pod kill) would not print errors from individual containers, but only a warning that some containers had failed.
Fixed a bug where the podman system service command would panic if a connection to the Events endpoint hung up early (#6805).
Fixed a bug where rootless Podman would create anonymous and named volumes with the wrong owner for containers run with the --user directive.
Fixed a bug where the TMPDIR environment variable (used for storing temporary files while pulling images) was not being defaulted (if unset) to /var/tmp.
Fixed a bug where the --publish flag to podman create and podman run required that a host port be specified if an IP address was given (#6806).
Fixed a bug where in podman-remote commands performing an attach (podman run, podman attach, podman start --attach, podman exec) did not properly configure the terminal on Windows.
Fixed a bug where the --remote flag to Podman required an argument, despite being a boolean (#6704).
Fixed a bug where the podman generate systemd --new command could generate incorrect unit files for a pod if a container in the pod was created using the --pod=... flag (with an =, instead of a space, before the pod ID) (#6766).
Fixed a bug where NPROC and NOFILE rlimits could be improperly set for rootless Podman containers, causing them to fail to start.
Fixed a bug where podman mount as rootless did not error (the podman mount command cannot be run rootless unless it is run inside a podman unshare shell).
Fixed a bug where in some cases a race in events handling code could cause error messages related to retrieving events to be lost.

API

Fixed a bug where the timestamp format for Libpod image list endpoint was incorrect - the format has been switched to Unix time.
Fixed a bug where the compatibility Create endpoint did not handle empty entrypoints properly.
Fixed a bug where the compatibility network remove endpoint would improperly handle errors where the network was not found.
Fixed a bug where containers would be created with improper permissions because of a umask issue (#6787).

2.0.1

Changes

The podman system connection command was mistakenly omitted from the 2.0 release, and has been included here.
The podman ps --format=json command once again includes container's creation time in a human-readable format in the CreatedAt key.
The podman inspect commands on containers now displays forwarded ports in a format compatible with docker inspect.
The --log-level=debug flag to podman run and podman exec will enable syslog for exit commands, ensuring that debug logs are collected for these otherwise-unlogged commands.

Bugfixes

Fixed a bug where podman build did not properly handle the --http-proxy and --cgroup-manager flags.
Fixed a bug where error messages related to a missing or inaccessible /etc/subuid or /etc/subgid file were very unclear (#6572).
Fixed a bug where the podman logs --follow command would not stop when the container being followed exited.
Fixed a bug where the --privileged flag had mistakenly been marked as conflicting with --group-add and --security-opt.
Fixed a bug where the PODMAN_USERNS environment variable was not being honored (#6705).
Fixed a bug where the podman image load command would require one argument be passed, when no arguments is also valid (#6718).
Fixed a bug where the bash completions did not include the podman network command and its subcommands.
Fixed a bug where the mount command would not work inside of rootless containers (#6735).
Fixed a bug where SSH agent authentication support was not properly working in the podman-remote and podman --remote commands.
Fixed a bug where the podman untag command was not erroring when no matching image was found.
Fixed a bug where stop signal for containers was not being set properly if not explicitly provided.
Fixed a bug where the podman ps command was not showing port mappings for containers which share a network namespace with another container (e.g. are part of a pod).
Fixed a bug where the --remote flag could unintentionally be forwarded into containers when using podman-remote.
Fixed a bug where unit files generated for pods by podman generate systemd would not allow individual containers to be restarted (#6770).
Fixed a bug where the podman run and podman create commands did not support all transports that podman pull does (#6744).
Fixed a bug where the label option to --security-opt would only be shown once in podman inspect, even if provided multiple times.

API

Fixed a bug where network endpoint URLs in the compatibility API were mistakenly suffixed with /json.
Fixed a bug where the Libpod volume creation endpoint returned 200 instead of 201 on success.

Misc

Updated containers/common to v0.14.3

2.0.0

Features

The REST API and podman system service are no longer experimental, and ready for use!
The Podman command now supports remotely connections via the REST API using the --remote flag.
The Podman remote client has been entirely rewritten to use the HTTP API instead of Varlink.
The podman system connection command has been added to allow configuring the endpoint that podman-remote and podman --remote will connect to.
The podman generate systemd command now supports the --new flag when used with pods, allowing portable services for pods to be created.
The podman play kube command now supports running Kubernetes Deployment YAML.
The podman exec command now supports the --detach flag to run commands in the container in the background.
The -p flag to podman run and podman create now supports forwarding ports to IPv6 addresses.
The podman run, podman create and podman pod create command now support a --replace flag to remove and replace any existing container (or, for pod create, pod) with the same name
The --restart-policy flag to podman run and podman create now supports the unless-stopped restart policy.
The --log-driver flag to podman run and podman create now supports the none driver, which does not log the container's output.
The --mount flag to podman run and podman create now accepts readonly option as an alias to ro.
The podman generate systemd command now supports the --container-prefix, --pod-prefix, and --separator arguments to control the name of generated unit files.
The podman network ls command now supports the --filter flag to filter results.
The podman auto-update command now supports specifying an authfile to use when pulling new images on a per-container basis using the io.containers.autoupdate.authfile label.

Changes

Varlink support, including the podman varlink command, is deprecated and will be removed in the next release.
As part of the implementation of the REST API, JSON output for some commands (podman ps, podman images most notably) has changed.
Named and anonymous volumes and tmpfs filesystems added to containers are no longer mounted noexec by default.

Bugfixes

Fixed a bug where the podman exec command would log to journald when run in containers logged to journald (#6555).
Fixed a bug where the podman auto-update command would not preserve the OS and architecture of the original image when pulling a replacement (#6613).
Fixed a bug where the podman cp command could create an extra merged directory when copying into an existing directory (#6596).
Fixed a bug where the podman pod stats command would crash on pods run with --network=host (#5652).
Fixed a bug where containers logs written to journald did not include the name of the container.
Fixed a bug where the podman network inspect and podman network rm commands did not properly handle non-default CNI configuration paths (#6212).
Fixed a bug where Podman did not properly remove containers when using the Kata containers OCI runtime.
Fixed a bug where podman inspect would sometimes incorrectly report the network mode of containers started with --net=none.
Podman is now better able to deal with cases where conmon is killed before the container it is monitoring.

Misc

The default Podman CNI configuration now sets HairpinMode to allow communication between containers by connecting to a forwarded port on the host.
Updated Buildah to v1.15.0
Updated containers/storage to v1.20.2
Updated containers/image to v5.5.1
Updated containers/common to v0.14.0

1.9.3

Bugfixes

Fixed a bug where, on FIPS enabled hosts, FIPS mode secrets were not properly mounted into containers
Fixed a bug where builds run over Varlink would hang (#6237)

Misc

Named volumes and tmpfs filesystems will no longer default to mounting noexec for improved compatibility with Docker
Updated Buildah to v1.14.9

1.9.2

Bugfixes

Fixed a bug where podman save would fail when the target image was specified by digest (#5234)
Fixed a bug where rootless containers with ports forwarded to them could panic and dump core due to a concurrency issue (#6018)
Fixed a bug where rootless Podman could race when opening the rootless user namespace, resulting in commands failing to run
Fixed a bug where HTTP proxy environment variables forwarded into the container by the --http-proxy flag could not be overridden by --env or --env-file (#6017)
Fixed a bug where rootless Podman was setting resource limits on cgroups v2 systems that were not using systemd-managed cgroups (and thus did not support resource limits), resulting in containers failing to start

Misc

Rootless containers will now automatically set their ulimits to the maximum allowed for the user running the container, to match the behavior of containers run as root
Packages managed by the core Podman team will no longer include a default libpod.conf, instead defaulting to containers.conf. The default libpod.conf will remain available in the GitHub repository until the release of Podman 2.0
The default Podman CNI network configuration now sets HairpinMode to allow containers to access other containers via ports published on the host
Updated containers/common to v0.8.4

1.9.1

Bugfixes

Fixed a bug where healthchecks could become nonfunctional if container log paths were manually set with --log-path and multiple container logs were placed in the same directory (#5915)
Fixed a bug where rootless Podman could, when using an older libpod.conf, print numerous warning messages about an invalid CGroup manager config
Fixed a bug where rootless Podman would sometimes fail to close the rootless user namespace when joining it (#5873)

Misc

Updated containers/common to v0.8.2

1.9.0

Features

Experimental support has been added for podman run --userns=auto, which automatically allocates a unique UID and GID range for the new container's user namespace
The podman play kube command now has a --network flag to place the created pod in one or more CNI networks
The podman commit command now supports an --iidfile flag to write the ID of the committed image to a file
Initial support for the new containers.conf configuration file has been added. containers.conf allows for much more detailed configuration of some Podman functionality

Changes

There has been a major cleanup of the podman info command resulting in breaking changes. Many fields have been renamed to better suit usage with APIv2
All uses of the --timeout flag have been switched to prefer the alternative --time. The --timeout flag will continue to work, but man pages and --help will use the --time flag instead

Bugfixes

Fixed a bug where some volume mounts from the host would sometimes not properly determine the flags they should use when mounting
Fixed a bug where Podman was not propagating $PATH to Conmon and the OCI runtime, causing issues for some OCI runtimes that required it
Fixed a bug where rootless Podman would print error messages about missing support for systemd cgroups when run in a container with no cgroup support (#5488)
Fixed a bug where podman play kube would not properly handle container-only port mappings (#5610)
Fixed a bug where the podman container prune command was not pruning containers in the created and configured states
Fixed a bug where Podman was not properly removing CNI IP address allocations after a reboot (#5433)
Fixed a bug where Podman was not properly applying the default Seccomp profile when --security-opt was not given at the command line

HTTP API

Many Libpod API endpoints have been added, including Changes, Checkpoint, Init, and Restore
Resolved issues where the podman system service command would time out and exit while there were still active connections
Stability overall has greatly improved as we prepare the API for a beta release soon with Podman 2.0

Misc

The default infra image for pods has been upgraded to k8s.gcr.io/pause:3.2 (from 3.1) to address a bug in the architecture metadata for non-AMD64 images
The slirp4netns networking utility in rootless Podman now uses Seccomp filtering where available for improved security
Updated Buildah to v1.14.8
Updated containers/storage to v1.18.2
Updated containers/image to v5.4.3
Updated containers/common to v0.8.1

1.8.2

Features

Initial support for automatically updating containers managed via Systemd unit files has been merged. This allows containers to automatically upgrade if a newer version of their image becomes available

Bugfixes

Fixed a bug where unit files generated by podman generate systemd --new would not force containers to detach, causing the unit to time out when trying to start
Fixed a bug where podman system reset could delete important system directories if run as rootless on installations created by older Podman (#4831)
Fixed a bug where image built by podman build would not properly set the OS and Architecture they were built with (#5503)
Fixed a bug where attached podman run with --sig-proxy enabled (the default), when built with Go 1.14, would repeatedly send signal 23 to the process in the container and could generate errors when the container stopped (#5483)
Fixed a bug where rootless podman run commands could hang when forwarding ports
Fixed a bug where rootless Podman would not work when /proc was mounted with the hidepid option set
Fixed a bug where the podman system service command would use large amounts of CPU when --timeout was set to 0 (#5531)

HTTP API

Initial support for Libpod endpoints related to creating and operating on image manifest lists has been added
The Libpod Healthcheck and Events API endpoints are now supported
The Swagger endpoint can now handle cases where no Swagger documentation has been generated

Misc

Updated Buildah to v1.14.3
Updated containers/storage to v1.16.5
Several performance improvements have been made to creating containers, which should somewhat improve the performance of podman create and podman run

1.8.1

Features

Many networking-related flags have been added to podman pod create to enable customization of pod networks, including --add-host, --dns, --dns-opt, --dns-search, --ip, --mac-address, --network, and --no-hosts
The podman ps --format=json command now includes the ID of the image containers were created with
The podman run and podman create commands now feature an --rmi flag to remove the image the container was using after it exits (if no other containers are using said image) (#4628)
The podman create and podman run commands now support the --device-cgroup-rule flag (#4876)
While the HTTP API remains in alpha, many fixes and additions have landed. These are documented in a separate subsection below
The podman create and podman run commands now feature a --no-healthcheck flag to disable healthchecks for a container (#5299)
Containers now recognize the io.containers.capabilities label, which specifies a list of capabilities required by the image to run. These capabilities will be used as long as they are more restrictive than the default capabilities used
YAML produced by the podman generate kube command now includes SELinux configuration passed into the container via --security-opt label=... (#4950)

Bugfixes

Fixed CVE-2020-1726, a security issue where volumes manually populated before first being mounted into a container could have those contents overwritten on first being mounted into a container
Fixed a bug where Podman containers with user namespaces in CNI networks with the DNS plugin enabled would not have the DNS plugin's nameserver added to their resolv.conf (#5256)
Fixed a bug where trailing / characters in image volume definitions could cause them to not be overridden by a user-specified mount at the same location (#5219)
Fixed a bug where the label option in libpod.conf, used to disable SELinux by default, was not being respected (#5087)
Fixed a bug where the podman login and podman logout commands required the registry to log into be specified (#5146)
Fixed a bug where detached rootless Podman containers could not forward ports (#5167)
Fixed a bug where rootless Podman could fail to run if the pause process had died
Fixed a bug where Podman ignored labels that were specified with only a key and no value (#3854)
Fixed a bug where Podman would fail to create named volumes when the backing filesystem did not support SELinux labelling (#5200)
Fixed a bug where --detach-keys="" would not disable detaching from a container (#5166)
Fixed a bug where the podman ps command was too aggressive when filtering containers and would force --all on in too many situations
Fixed a bug where the podman play kube command was ignoring image configuration, including volumes, working directory, labels, and stop signal (#5174)
Fixed a bug where the Created and CreatedTime fields in podman images --format=json were misnamed, which also broke Go template output for those fields (#5110)
Fixed a bug where rootless Podman containers with ports forwarded could hang when started (#5182)
Fixed a bug where podman pull could fail to parse registry names including port numbers
Fixed a bug where Podman would incorrectly attempt to validate image OS and architecture when starting containers
Fixed a bug where Bash completion for podman build -f would not list available files that could be built (#3878)
Fixed a bug where podman commit --change would perform incorrect validation, resulting in valid changes being rejected (#5148)
Fixed a bug where podman logs --tail could take large amounts of memory when the log file for a container was large (#5131)
Fixed a bug where Podman would sometimes incorrectly generate firewall rules on systems using firewalld
Fixed a bug where the podman inspect command would not display network information for containers properly if a container joined multiple CNI networks (#4907)
Fixed a bug where the --uts flag to podman create and podman run would only allow specifying containers by full ID (#5289)
Fixed a bug where rootless Podman could segfault when passed a large number of file descriptors
Fixed a bug where the podman port command was incorrectly interpreting additional arguments as container names, instead of port numbers
Fixed a bug where units created by podman generate systemd did not depend on network targets, and so could start before the system network was ready (#4130)
Fixed a bug where exec sessions in containers which did not specify a user would not inherit supplemental groups added to the container via --group-add
Fixed a bug where Podman would not respect the $TMPDIR environment variable for placing large temporary files during some operations (e.g. podman pull) (#5411)

HTTP API

Initial support for secure connections to servers via SSH tunneling has been added
Initial support for the libpod create and logs endpoints for containers has been added
Added a /swagger/ endpoint to serve API documentation
The json endpoint for containers has received many fixes
Filtering images and containers has been greatly improved, with many bugs fixed and documentation improved
Image creation endpoints (commit, pull, etc) have seen many fixes
Server timeout has been fixed so that long operations will no longer trigger the timeout and shut the server down
The stats endpoint for containers has seen major fixes and now provides accurate output
Handling the HTTP 304 status code has been fixed for all endpoints
Many fixes have been made to API documentation to ensure it matches the code

Misc

Updated vendored Buildah to v1.14.2
Updated vendored containers/storage to v1.16.2
The Created field to podman images --format=json has been renamed to CreatedSince as part of the fix for (#5110). Go templates using the old name should still work
The CreatedTime field to podman images --format=json has been renamed to CreatedAt as part of the fix for (#5110). Go templates using the old name should still work
The before filter to podman images has been renamed to since for Docker compatibility. Using before will still work, but documentation has been changed to use the new since filter
Using the --password flag to podman login now warns that passwords are being passed in plaintext
Some common cases where Podman would deadlock have been fixed to warn the user that podman system renumber must be run to resolve the deadlock

1.8.0

Features

The podman system service command has been added, providing a preview of Podman's new Docker-compatible API. This API is still very new, and not yet ready for production use, but is available for early testing
Rootless Podman now uses Rootlesskit for port forwarding, which should greatly improve performance and capabilities
The podman untag command has been added to remove tags from images without deleting them
The podman inspect command on images now displays previous names they used
The podman generate systemd command now supports a --new option to generate service files that create and run new containers instead of managing existing containers
Support for --log-opt tag= to set logging tags has been added to the journald log driver
Added support for using Seccomp profiles embedded in images for podman run and podman create via the new --seccomp-policy CLI flag (#4806)
The podman play kube command now honors pull policy (#4880)

Bugfixes

Fixed a bug where the podman cp command would not copy the contents of directories when paths ending in /. were given (#4717)
Fixed a bug where the podman play kube command did not properly locate Seccomp profiles specified relative to localhost (#4555)
Fixed a bug where the podman info command for remote Podman did not show registry information (#4793)
Fixed a bug where the podman exec command did not support having input piped into it (#3302)
Fixed a bug where the podman cp command with rootless Podman on CGroups v2 systems did not properly determine if the container could be paused while copying (#4813)
Fixed a bug where the podman container prune --force command could possible remove running containers if they were started while the command was running (#4844)
Fixed a bug where Podman, when run as root, would not properly configure slirp4netns networking when requested (#4853)
Fixed a bug where podman run --userns=keep-id did not work when the user had a UID over 65535 (#4838)
Fixed a bug where rootless podman run and podman create with the --userns=keep-id option could change permissions on /run/user/$UID and break KDE (#4846)
Fixed a bug where rootless Podman could not be run in a systemd service on systems using CGroups v2 (#4833)
Fixed a bug where podman inspect would show CPUShares as 0, instead of the default (1024), when it was not explicitly set (#4822)
Fixed a bug where podman-remote push would segfault (#4706)
Fixed a bug where image healthchecks were not shown in the output of podman inspect (#4799)
Fixed a bug where named volumes created with containers from pre-1.6.3 releases of Podman would be autoremoved with their containers if the --rm flag was given, even if they were given names (#5009)
Fixed a bug where podman history was not computing image sizes correctly (#4916)
Fixed a bug where Podman would not error on invalid values to the --sort flag to podman images
Fixed a bug where providing a name for the image made by podman commit was mandatory, not optional as it should be (#5027)
Fixed a bug where the remote Podman client would append an extra " to %PATH (#4335)
Fixed a bug where the podman build command would sometimes ignore the -f option and build the wrong Containerfile
Fixed a bug where the podman ps --filter command would only filter running containers, instead of all containers, if --all was not passed (#5050)
Fixed a bug where the podman load command on compressed images would leave an extra copy on disk
Fixed a bug where the podman restart command would not properly clean up the network, causing it to function differently from podman stop; podman start (#5051)
Fixed a bug where setting the --memory-swap flag to podman create and podman run to -1 (to indicate unlimited) was not supported (#5091)

Misc

Initial work on version 2 of the Podman remote API has been merged, but is still in an alpha state and not ready for use. Read more here
Many formatting corrections have been made to the manpages
The changes to address (#5009) may cause anonymous volumes created by Podman versions 1.6.3 to 1.7.0 to not be removed when their container is removed
Updated vendored Buildah to v1.13.1
Updated vendored containers/storage to v1.15.8
Updated vendored containers/image to v5.2.0

1.7.0

Features

Added support for setting a static MAC address for containers
Added support for creating macvlan networks with podman network create, allowing Podman containers to be attached directly to networks the host is connected to
The podman image prune and podman container prune commands now support the --filter flag to filter what will be pruned, and now prompts for confirmation when run without --force (#4410 and #4411)
Podman now creates CGroup namespaces by default on systems using CGroups v2 (#4363)
Added the podman system reset command to remove all Podman files and perform a factory reset of the Podman installation
Added the --history flag to podman images to display previous names used by images (#4566)
Added the --ignore flag to podman rm and podman stop to not error when requested containers no longer exist
Added the --cidfile flag to podman rm and podman stop to read the IDs of containers to be removed or stopped from a file
The podman play kube command now honors Seccomp annotations (#3111)
The podman play kube command now honors RunAsUser, RunAsGroup, and selinuxOptions
The output format of the podman version command has been changed to better match docker version when using the --format flag
Rootless Podman will no longer initialize containers/storage twice, removing a potential deadlock preventing Podman commands from running while an image was being pulled (#4591)
Added tmpcopyup and notmpcopyup options to the --tmpfs and --mount type=tmpfs flags to podman create and podman run to control whether the content of directories are copied into tmpfs filesystems mounted over them
Added support for disabling detaching from containers by setting empty detach keys via --detach-keys=""
The podman build command now supports the --pull and --pull-never flags to control when images are pulled during a build
The podman ps -p command now shows the name of the pod as well as its ID (#4703)
The podman inspect command on containers will now display the command used to create the container
The podman info command now displays information on registry mirrors (#4553)

Bugfixes

Fixed a bug where Podman would use an incorrect runtime directory as root, causing state to be deleted after root logged out and making Podman in systemd services not function properly
Fixed a bug where the --change flag to podman import and podman commit was not being parsed properly in many cases
Fixed a bug where detach keys specified in libpod.conf were not used by the podman attach and podman exec commands, which always used the global default ctrl-p,ctrl-q key combination (#4556)
Fixed a bug where rootless Podman was not able to run podman pod stats even on CGroups v2 enabled systems (#4634)
Fixed a bug where rootless Podman would fail on kernels without the renameat2 syscall (#4570)
Fixed a bug where containers with chained network namespace dependencies (IE, container A using --net container=B and container B using --net container=C) would not properly mount /etc/hosts and /etc/resolv.conf into the container (#4626)
Fixed a bug where podman run with the --rm flag and without -d could, when run in the background, throw a 'container does not exist' error when attempting to remove the container after it exited
Fixed a bug where named volume locks were not properly reacquired after a reboot, potentially leading to deadlocks when trying to start containers using the volume (#4605 and #4621)
Fixed a bug where Podman could not completely remove containers if sent SIGKILL during removal, leaving the container name unusable without the podman rm --storage command to complete removal (#3906)
Fixed a bug where checkpointing containers started with --rm was allowed when --export was not specified (the container, and checkpoint, would be removed after checkpointing was complete by --rm) (#3774)
Fixed a bug where the podman pod prune command would fail if containers were present in the pods and the --force flag was not passed (#4346)
Fixed a bug where containers could not set a static IP or static MAC address if they joined a non-default CNI network (#4500)
Fixed a bug where podman system renumber would always throw an error if a container was mounted when it was run
Fixed a bug where podman container restore would fail with containers using a user namespace
Fixed a bug where rootless Podman would attempt to use the journald events backend even on systems without systemd installed
Fixed a bug where podman history would sometimes not properly identify the IDs of layers in an image (#3359)
Fixed a bug where containers could not be restarted when Conmon v2.0.3 or later was used
Fixed a bug where Podman did not check image OS and Architecture against the host when starting a container
Fixed a bug where containers in pods did not function properly with the Kata OCI runtime (#4353)
Fixed a bug where `podman info --format '{{ json . }}' would not produce JSON output (#4391)
Fixed a bug where Podman would not verify if files passed to --authfile existed (#4328)
Fixed a bug where podman images --digest would not always print digests when they were available
Fixed a bug where rootless podman run could hang due to a race with reading and writing events
Fixed a bug where rootless Podman would print warning-level logs despite not be instructed to do so (#4456)
Fixed a bug where podman pull would attempt to fetch from remote registries when pulling an unqualified image using the docker-daemon transport (#4434)
Fixed a bug where podman cp would not work if STDIN was a pipe
Fixed a bug where podman exec could stop accepting input if anything was typed between the command being run and the exec session starting (#4397)
Fixed a bug where podman logs --tail 0 would print all lines of a container's logs, instead of no lines (#4396)
Fixed a bug where the timeout for slirp4netns was incorrectly set, resulting in an extremely long timeout (#4344)
Fixed a bug where the podman stats command would print CPU utilizations figures incorrectly (#4409)
Fixed a bug where the podman inspect --size command would not print the size of the container's read/write layer if the size was 0 (#4744)
Fixed a bug where the podman kill command was not properly validating signals before use (#4746)
Fixed a bug where the --quiet and --format flags to podman ps could not be used at the same time
Fixed a bug where the podman stop command was not stopping exec sessions when a container was created without a PID namespace (--pid=host)
Fixed a bug where the podman pod rm --force command was not removing anonymous volumes for containers that were removed
Fixed a bug where the podman checkpoint command would not export all changes to the root filesystem of the container if performed more than once on the same container (#4606)
Fixed a bug where containers started with --rm would not be automatically removed on being stopped if an exec session was running inside the container (#4666)

Misc

The fixes to runtime directory path as root can cause strange behavior if an upgrade is performed while containers are running
Updated vendored Buildah to v1.12.0
Updated vendored containers/storage library to v1.15.4
Updated vendored containers/image library to v5.1.0
Kata Containers runtimes (kata-runtime, kata-qemu, and kata-fc) are now present in the default libpod.conf, but will not be available unless Kata containers is installed on the system
Podman previously did not allow the creation of containers with a memory limit lower than 4MB. This restriction has been removed, as the crun runtime can create containers with significantly less memory

1.6.3

Features

Handling of the libpod.conf configuration file has seen major changes. Most significantly, rootless users will no longer automatically receive a complete configuration file when they first use Podman, and will instead only receive differences from the global configuration.
Initial support for the CNI DNS plugin, which allows containers to resolve the IPs of other containers via DNS name, has been added
Podman now supports anonymous named volumes, created by specifying only a destination to the -v flag to the podman create and podman run commands
Named volumes now support uid and gid options in --opt o=... to set UID and GID of the created volume

Bugfixes

Fixed a bug where the podman start command would print container ID, instead of name, when starting containers given their name
Fixed a bug where named volumes with options did not properly detect issues with mounting the volume, leading to an inconsistent state (#4303)
Fixed a bug where incorrect Seccomp profiles were used in containers generated by podman play kube
Fixed a bug where processes started by podman exec would have the wrong SELinux label in some circumstances (#4361)
Fixed a bug where error messages from slirp4netns would be lost
Fixed a bug where podman run --network=$NAME would not throw an error in rootless Podman, where CNI networks are not supported
Fixed a bug where podman network create would throw confusing errors when trying to create a volume with a name that already exists
Fixed a bug where Podman would not error if the systemd CGroup manager was specified, but systemd could not be contacted over DBus
Fixed a bug where image volumes were mounted noexec (#4318)
Fixed a bug where the podman stats command required the name of a container to be given, instead of showing all containers when no container was specified (#4274)
Fixed a bug where the podman volume inspect command would not show the options that named volumes were created with
Fixed a bug where custom storage configuration was not written to storage.conf at time of first creation for rootless Podman (#2659)
Fixed a bug where remote Podman did not support shell redirection of container output

Misc

Updated vendored containers/image library to v5.0
Initial support for images using manifest lists has been added, though commands for directly interacting with manifests are still missing
Support for pushing to and pulling from OSTree has been removed due to deprecation in the containers/image library
Rootless Podman no longer enables linger on systems with systemd as init by default. As such, containers will now be killed when the user who ran them logs out, unless linger is explicitly enabled using loginctl
Podman will now check the version of conmon that is in use to ensure it is sufficient

1.6.2

Features

Added a --runtime flag to podman system migrate to allow the OCI runtime for all containers to be reset, to ease transition to the crun runtime on CGroups V2 systems until runc gains full support
The podman rm command can now remove containers in broken states which previously could not be removed
The podman info command, when run without root, now shows information on UID and GID mappings in the rootless user namespace
Added podman build --squash-all flag, which squashes all layers (including those of the base image) into one layer
The --systemd flag to podman run and podman create now accepts a string argument and allows a new value, always, which forces systemd support without checking if the the container entrypoint is systemd

Bugfixes

Fixed a bug where the podman top command did not work on systems using CGroups V2 (#4192)
Fixed a bug where rootless Podman could double-close a file, leading to a panic
Fixed a bug where rootless Podman could fail to retrieve some containers while refreshing the state
Fixed a bug where podman start --attach --sig-proxy=false would still proxy signals into the container
Fixed a bug where Podman would unconditionally use a non-default path for authentication credentials (auth.json), breaking podman login integration with skopeo and other tools using the containers/image library
Fixed a bug where podman ps --format=json and podman images --format=json would display null when no results were returned, instead of valid JSON
Fixed a bug where podman build --squash was incorrectly squashing all layers into one, instead of only new layers
Fixed a bug where rootless Podman would allow volumes with options to be mounted (mounting volumes requires root), creating an inconsistent state where volumes reported as mounted but were not (#4248)
Fixed a bug where volumes which failed to unmount could not be removed (#4247)
Fixed a bug where Podman incorrectly handled some errors relating to unmounted or missing containers in containers/storage
Fixed a bug where podman stats was broken on systems running CGroups V2 when run rootless (#4268)
Fixed a bug where the podman start command would print the short container ID, instead of the full ID
Fixed a bug where containers created with an OCI runtime that is no longer available (uninstalled or removed from the config file) would not appear in podman ps and could not be removed via podman rm
Fixed a bug where containers restored via podman container restore --import would retain the CGroup path of the original container, even if their container ID changed; thus, multiple containers created from the same checkpoint would all share the same CGroup

Misc

The default PID limit for containers is now set to 4096. It can be adjusted back to the old default (unlimited) by passing --pids-limit 0 to podman create and podman run
The podman start --attach command now automatically attaches STDIN if the container was created with -i
The podman network create command now validates network names using the same regular expression as container and pod names
The --systemd flag to podman run and podman create will now only enable systemd mode when the binary being run inside the container is /sbin/init, /usr/sbin/init, or ends in systemd (previously detected any path ending in init or systemd)
Updated vendored Buildah to 1.11.3
Updated vendored containers/storage to 1.13.5
Updated vendored containers/image to 4.0.1

1.6.1

Bugfixes

Fixed a bug where rootless Podman on systems using CGroups V2 would not function with the cgroupfs CGroups manager
Fixed a bug where rootless Podman could not correctly identify the DBus session address, causing containers to fail to start (#4162)
Fixed a bug where rootless Podman with slirp4netns networking would fail to start containers due to mount leaks

1.6.0

Features

The podman network create, podman network rm, podman network inspect, and podman network ls commands have been added to manage CNI networks used by Podman
The podman volume create command can now create and mount volumes with options, allowing volumes backed by NFS, tmpfs, and many other filesystems
Podman can now run containers without CGroups for better integration with systemd by using the --cgroups=disabled flag with podman create and podman run. This is presently only supported with the crun OCI runtime
The podman volume rm and podman volume inspect commands can now refer to volumes by an unambiguous partial name, in addition to full name (e.g. podman volume rm myvol to remove a volume named myvolume) (#3891)
The podman run and podman create commands now support the --pull flag to allow forced re-pulling of images (#3734)
Mounting volumes into a container using --volume, --mount, and --tmpfs now allows the suid, dev, and exec mount options (the inverse of nosuid, nodev, noexec) (#3819)
Mounting volumes into a container using --mount now allows the relabel=Z and relabel=z options to relabel mounts.
The podman push command now supports the --digestfile option to save a file containing the pushed digest
Pods can now have their hostname set via podman pod create --hostname or providing Pod YAML with a hostname set to podman play kube (#3732)
The podman image sign command now supports the --cert-dir flag
The podman run and podman create commands now support the --security-opt label=filetype:$LABEL flag to set the SELinux label for container files
The remote Podman client now supports healthchecks

Bugfixes

Fixed a bug where remote podman pull would panic if a Varlink connection was not available (#4013)
Fixed a bug where podman exec would not properly set terminal size when creating a new exec session (#3903)
Fixed a bug where podman exec would not clean up socket symlinks on the host (#3962)
Fixed a bug where Podman could not run systemd in containers that created a CGroup namespace
Fixed a bug where podman prune -a would attempt to prune images used by Buildah and CRI-O, causing errors (#3983)
Fixed a bug where improper permissions on the ~/.config directory could cause rootless Podman to use an incorrect directory for storing some files
Fixed a bug where the bash completions for podman import threw errors
Fixed a bug where Podman volumes created with podman volume create would not copy the contents of their mountpoint the first time they were mounted into a container (#3945)
Fixed a bug where rootless Podman could not run podman exec when the container was not run inside a CGroup owned by the user (#3937)
Fixed a bug where podman play kube would panic when given Pod YAML without a securityContext (#3956)
Fixed a bug where Podman would place files incorrectly when storage.conf configuration items were set to the empty string (#3952)
Fixed a bug where podman build did not correctly inherit Podman's CGroup configuration, causing crashed on CGroups V2 systems (#3938)
Fixed a bug where podman cp would improperly copy files on the host when copying a symlink in the container that included a glob operator (#3829)
Fixed a bug where remote podman run --rm would exit before the container was completely removed, allowing race conditions when removing container resources (#3870)
Fixed a bug where rootless Podman would not properly handle changes to /etc/subuid and /etc/subgid after a container was launched
Fixed a bug where rootless Podman could not include some devices in a container using the --device flag (#3905)
Fixed a bug where the commit Varlink API would segfault if provided incorrect arguments (#3897)
Fixed a bug where temporary files were not properly cleaned up after a build using remote Podman (#3869)
Fixed a bug where podman remote cp crashed instead of reporting it was not yet supported (#3861)
Fixed a bug where podman exec would run as the wrong user when execing into a container was started from an image with Dockerfile USER (or a user specified via podman run --user) (#3838)
Fixed a bug where images pulled using the oci: transport would be improperly named
Fixed a bug where podman varlink would hang when managed by systemd due to SD_NOTIFY support conflicting with Varlink (#3572)
Fixed a bug where mounts to the same destination would sometimes not trigger a conflict, causing a race as to which was actually mounted
Fixed a bug where podman exec --preserve-fds caused Podman to hang (#4020)
Fixed a bug where removing an unmounted container that was unmounted might sometimes not properly clean up the container (#4033)
Fixed a bug where the Varlink server would freeze when run in a systemd unit file (#4005)
Fixed a bug where Podman would not properly set the $HOME environment variable when the OCI runtime did not set it
Fixed a bug where rootless Podman would incorrectly print warning messages when an OCI runtime was not found (#4012)
Fixed a bug where named volumes would conflict with, instead of overriding, tmpfs filesystems added by the --read-only-tmpfs flag to podman create and podman run
Fixed a bug where podman cp would incorrectly make the target directory when copying to a symlink which pointed to a nonexistent directory (#3894)
Fixed a bug where remote Podman would incorrectly read STDIN when the -i flag was not set (#4095)
Fixed a bug where podman play kube would create an empty pod when given an unsupported YAML type (#4093)
Fixed a bug where podman import --change improperly parsed CMD (#4000)

Misc

Significant changes were made to Podman volumes in this release. If you have pre-existing volumes, it is strongly recommended to run podman system renumber after upgrading.
Version 0.8.1 or greater of the CNI Plugins is now required for Podman
Version 2.0.1 or greater of Conmon is strongly recommended
Updated vendored Buildah to v1.11.2
Updated vendored containers/storage library to v1.13.4
Improved error messages when trying to create a pod with no name via podman play kube
Improved error messages when trying to run podman pause or podman stats on a rootless container on a system without CGroups V2 enabled
TMPDIR has been set to /var/tmp by default to better handle large temporary files
podman wait has been optimized to detect stopped containers more rapidly
Podman containers now include a ContainerManager annotation indicating they were created by libpod
The podman info command now includes information about slirp4netns and fuse-overlayfs if they are available
Podman no longer sets a default size of 65kb for tmpfs filesystems
The default Podman CNI network has been renamed in an attempt to prevent conflicts with CRI-O when both are run on the same system. This should only take effect on system restart
The output of podman volume inspect has been more closely matched to docker volume inspect

1.5.1

Features

The hostname of pods is now set to the pod's name

Bugfixes

Fixed a bug where podman run and podman create did not honor the --authfile option (#3730)
Fixed a bug where containers restored with podman container restore --import would incorrectly duplicate the Conmon PID file of the original container
Fixed a bug where podman build ignored the default OCI runtime configured in libpod.conf
Fixed a bug where podman run --rm (or force-removing any running container with podman rm --force) were not retrieving the correct exit code (#3795)
Fixed a bug where Podman would exit with an error if any configured hooks directory was not present
Fixed a bug where podman inspect and podman commit would not use the correct CMD for containers run with podman play kube
Fixed a bug created pods when using rootless Podman and CGroups V2 (#3801)
Fixed a bug where the podman events command with the --since or --until options could take a very long time to complete

Misc

Rootless Podman will now inherit OCI runtime configuration from the root configuration (#3781)
Podman now properly sets a user agent while contacting registries (#3788)

1.5.0

Features

Podman containers can now join the user namespaces of other containers with --userns=container:$ID, or a user namespace at an arbitrary path with --userns=ns:$PATH
Rootless Podman can experimentally squash all UIDs and GIDs in an image to a single UID and GID (which does not require use of the newuidmap and newgidmap executables) by passing --storage-opt ignore_chown_errors
The podman generate kube command now produces YAML for any bind mounts the container has created (#2303)
The podman container restore command now features a new flag, --ignore-static-ip, that can be used with --import to import a single container with a static IP multiple times on the same host
Added the ability for podman events to output JSON by specifying --format=json
If the OCI runtime or conmon binary cannot be found at the paths specified in libpod.conf, Podman will now also search for them in the calling user's path
Added the ability to use podman import with URLs (#3609)
The podman ps command now supports filtering names using regular expressions (#3394)
Rootless Podman containers with --privileged set will now mount in all host devices that the user can access
The podman create and podman run commands now support the --env-host flag to forward all environment variables from the host into the container
Rootless Podman now supports healthchecks (#3523)
The format of the HostConfig portion of the output of podman inspect on containers has been improved and synced with Docker
Podman containers now support CGroup namespaces, and can create them by passing --cgroupns=private to podman run or podman create
The podman create and podman run commands now support the --ulimit=host flag, which uses any ulimits currently set on the host for the container
The podman rm and podman rmi commands now use different exit codes to indicate 'no such container' and 'container is running' errors
Support for CGroups V2 through the crun OCI runtime has been greatly improved, allowing resource limits to be set for rootless containers when the CGroups V2 hierarchy is in use

Bugfixes

Fixed a bug where a race condition could cause podman restart to fail to start containers with ports
Fixed a bug where containers restored from a checkpoint would not properly report the time they were started at
Fixed a bug where podman search would return at most 25 results, even when the maximum number of results was set higher
Fixed a bug where podman play kube would not honor capabilities set in imported YAML (#3689)
Fixed a bug where podman run --env, when passed a single key (to use the value from the host), would set the environment variable in the container even if it was not set on the host (#3648)
Fixed a bug where podman commit --changes would not properly set environment variables
Fixed a bug where Podman could segfault while working with images with no history
Fixed a bug where podman volume rm could remove arbitrary volumes if given an ambiguous name (#3635)
Fixed a bug where podman exec invocations leaked memory by not cleaning up files in tmpfs
Fixed a bug where the --dns and --net=container flags to podman run and podman create were not mutually exclusive (#3553)
Fixed a bug where rootless Podman would be unable to run containers when less than 5 UIDs were available
Fixed a bug where containers in pods could not be removed without removing the entire pod (#3556)
Fixed a bug where Podman would not properly clean up all CGroup controllers for created cgroups when using the cgroupfs CGroup driver
Fixed a bug where Podman containers did not properly clean up files in tmpfs, resulting in a memory leak as containers stopped
Fixed a bug where healthchecks from images would not use default settings for interval, retries, timeout, and start period when they were not provided by the image (#3525)
Fixed a bug where healthchecks using the HEALTHCHECK CMD format where not properly supported (#3507)
Fixed a bug where volume mounts using relative source paths would not be properly resolved (#3504)
Fixed a bug where podman run did not use authorization credentials when a custom path was specified (#3524)
Fixed a bug where containers checkpointed with podman container checkpoint did not properly set their finished time
Fixed a bug where running podman inspect on any container not created with podman run or podman create (for example, pod infra containers) would result in a segfault (#3500)
Fixed a bug where healthcheck flags for podman create and podman run were incorrectly named (#3455)
Fixed a bug where Podman commands would fail to find targets if a partial ID was specified that was ambiguous between a container and pod (#3487)
Fixed a bug where restored containers would not have the correct SELinux label
Fixed a bug where Varlink endpoints were not working properly if more was not correctly specified
Fixed a bug where the Varlink PullImage endpoint would crash if an error occurred (#3715)
Fixed a bug where the --mount flag to podman create and podman run did not allow boolean arguments for its ro and rw options (#2980)
Fixed a bug where pods did not properly share the UTS namespace, resulting in incorrect behavior from some utilities which rely on hostname (#3547)
Fixed a bug where Podman would unconditionally append ENTRYPOINT to CMD during podman commit (and when reporting CMD in podman inspect) (#3708)
Fixed a bug where podman events with the journald events backend would incorrectly print 6 previous events when only new events were requested (#3616)
Fixed a bug where podman port would exit prematurely when a port number was specified (#3747)
Fixed a bug where passing . as an argument to the --dns-search flag to podman create and podman run was not properly clearing DNS search domains in the container

Misc

Updated vendored Buildah to v1.10.1
Updated vendored containers/image to v3.0.2
Updated vendored containers/storage to v1.13.1
Podman now requires conmon v2.0.0 or higher
The podman info command now displays the events logger being in use
The podman inspect command on containers now includes the ID of the pod a container has joined and the PID of the container's conmon process
The -v short flag for podman --version has been re-added
Error messages from podman pull should be significantly clearer
The podman exec command is now available in the remote client

1.4.4

Bugfixes

Fixed a bug where rootless Podman would attempt to use the entire root configuration if no rootless configuration was present for the user, breaking rootless Podman for new installations
Fixed a bug where rootless Podman's pause process would block SIGTERM, preventing graceful system shutdown and hanging until the system's init send SIGKILL
Fixed a bug where running Podman as root with sudo -E would not work after running rootless Podman at least once
Fixed a bug where options for tmpfs volumes added with the --tmpfs flag were being ignored
Fixed a bug where images with no layers could not properly be displayed and removed by Podman
Fixed a bug where locks were not properly freed on failure to create a container or pod

Misc

Updated containers/storage to v1.12.13

1.4.3

Features

Podman now has greatly improved support for containers using multiple OCI runtimes. Containers now remember if they were created with a different runtime using --runtime and will always use that runtime
The cached and delegated options for volume mounts are now allowed for Docker compatibility (#3340)
The podman diff command now supports the --latest flag

Bugfixes

Fixed a bug where podman cp on a single file would create a directory at the target and place the file in it (#3384)
Fixed a bug where podman inspect --format '{{.Mounts}}' would print a hexadecimal address instead of a container's mounts
Fixed a bug where rootless Podman would not add an entry to container's /etc/hosts files for their own hostname (#3405)
Fixed a bug where podman ps --sync would segfault (#3411)
Fixed a bug where podman generate kube would produce an invalid ports configuration (#3408)

Misc

Podman now performs much better on systems with heavy I/O load
The --cgroup-manager flag to podman now shows the correct default setting in help if the default was overridden by libpod.conf
For backwards compatibility, setting --log-driver=json-file in podman run is now supported as an alias for --log-driver=k8s-file. This is considered deprecated, and json-file will be moved to a new implementation in the future (#3363)
Podman's default libpod.conf file now allows the crun OCI runtime to be used if it is installed

1.4.2

Bugfixes

Fixed a bug where Podman could not run containers using an older version of Systemd as init (#3295)

Misc

Updated vendored Buildah to v1.9.0 to resolve a critical bug with Dockerfile RUN instructions
The error message for running podman kill on containers that are not running has been improved
The Podman remote client can now log to a file if syslog is not available

1.4.1

Features

The podman exec command now sets its error code differently based on whether the container does not exist, and the command in the container does not exist
The podman inspect command on containers now outputs Mounts JSON that matches that of docker inspect, only including user-specified volumes and differentiating bind mounts and named volumes
The podman inspect command now reports the path to a container's OCI spec with the OCIConfigPath key (only included when the container is initialized or running)
The podman run --mount command now supports the bind-nonrecursive option for bind mounts (#3314)

Bugfixes

Fixed a bug where podman play kube would fail to create containers due to an unspecified log driver
Fixed a bug where Podman would fail to build with musl libc (#3284)
Fixed a bug where rootless Podman using slirp4netns networking in an environment with no nameservers on the host other than localhost would result in nonfunctional networking (#3277)
Fixed a bug where podman import would not properly set environment variables, discarding their values and retaining only keys
Fixed a bug where Podman would fail to run when built with Apparmor support but run on systems without the Apparmor kernel module loaded (#3331)

Misc

Remote Podman will now default the username it uses to log in to remote systems to the username of the current user
Podman now uses JSON logging with OCI runtimes that support it, allowing for better error reporting
Updated vendored Buildah to v1.8.4
Updated vendored containers/image to v2.0

1.4.0

Features

The podman checkpoint and podman restore commands can now be used to migrate containers between Podman installations on different systems (#1618)
The podman cp command now supports a pause flag to pause containers while copying into them
The remote client now supports a configuration file for pre-configuring connections to remote Podman installations

Bugfixes

Fixed CVE-2019-10152 - The podman cp command improperly dereferenced symlinks in host context
Fixed a bug where podman commit could improperly set environment variables that contained = characters (#3132)
Fixed a bug where rootless Podman would sometimes fail to start containers with forwarded ports (#2942)
Fixed a bug where podman version on the remote client could segfault (#3145)
Fixed a bug where podman container runlabel would use /proc/self/exe instead of the path of the Podman command when printing the command being executed
Fixed a bug where filtering images by label did not work (#3163)
Fixed a bug where specifying a bing mount or tmpfs mount over an image volume would cause a container to be unable to start (#3174)
Fixed a bug where podman generate kube did not work with containers with named volumes
Fixed a bug where rootless Podman would receive permission denied errors accessing conmon.pid (#3187)
Fixed a bug where podman cp with a folder specified as target would replace the folder, as opposed to copying into it (#3184)
Fixed a bug where rootless Podman commands could double-unlock a lock, causing a crash (#3207)
Fixed a bug where Podman incorrectly set tmpcopyup on /dev/ mounts, causing errors when using the Kata containers runtime (#3229)
Fixed a bug where podman exec would fail on older kernels (#2968)

Misc

The podman inspect command on containers now uses the Id key (instead of ID) for the container's ID, for better compatibility with the output of docker inspect
The podman commit command is now usable with the Podman remote client
The --signature-policy flag (used with several image-related commands) has been deprecated
The podman unshare command now defines two environment variables in the spawned shell: CONTAINERS_RUNROOT and CONTAINERS_GRAPHROOT, pointing to temporary and permanent storage for rootless containers
Updated vendored containers/storage and containers/image libraries with numerous bugfixes
Updated vendored Buildah to v1.8.3
Podman now requires Conmon v0.2.0
The podman cp command is now aliased as podman container cp
Rootless Podman will now default init_path using root Podman's configuration files (/etc/containers/libpod.conf and /usr/share/containers/libpod.conf) if not overridden in the rootless configuration

1.3.1

Features

The podman cp command can now read input redirected to STDIN, and output to STDOUT instead of a file, using - instead of an argument.
The Podman remote client now displays version information from both the client and server in podman version
The podman unshare command has been added, allowing easy entry into the user namespace set up by rootless Podman (allowing the removal of files created by rootless Podman, among other things)

Bugfixes

Fixed a bug where Podman containers with the --rm flag were removing created volumes when they were automatically removed (#3071)
Fixed a bug where container and pod locks were incorrectly marked as released after a system reboot, causing errors on container and pod removal (#2900)
Fixed a bug where Podman pods could not be removed if any container in the pod encountered an error during removal (#3088)
Fixed a bug where Podman pods run with the cgroupfs CGroup driver would encounter a race condition during removal, potentially failing to remove the pod CGroup
Fixed a bug where the podman container checkpoint and podman container restore commands were not visible in the remote client
Fixed a bug where podman remote ps --ns would not print the container's namespaces (#2938)
Fixed a bug where removing stopped containers with healthchecks could cause an error
Fixed a bug where the default libpod.conf file was causing parsing errors (#3095)
Fixed a bug where pod locks were not being freed when pods were removed, potentially leading to lock exhaustion
Fixed a bug where 'podman run' with SD_NOTIFY set could, on short-running containers, create an inconsistent state rendering the container unusable

Misc

The remote Podman client now uses the Varlink bridge to establish remote connections by default

1.3.0

Features

Podman now supports container restart policies! The --restart flag on podman create and podman run allows containers to be restarted after they exit. Please note that Podman cannot restart containers after a system reboot - for that, see our next feature
Podman podman generate systemd command was added to generate systemd unit files for managing Podman containers
The podman runlabel command now allows a $GLOBAL_OPTS variable, which will be populated by global options passed to the podman runlabel command, allowing custom storage configurations to be passed into containers run with runlabel (#2399)
The podman play kube command now allows File and FileOrCreate volumes
The podman pod prune command was added to prune unused pods
Added the podman system migrate command to migrate containers using older configurations to allow their use by newer Libpod versions (#2935)
Podman containers now forward proxy-related environment variables from the host into the container with the --http-proxy flag (enabled by default)
Read-only Podman containers can now create tmpfs filesystems on /tmp, /var/tmp, and /run with the --read-only-tmpfs flag (enabled by default)
The podman init command was added, performing all container pre-start tasks without starting the container to allow pre-run debugging

Bugfixes

Fixed a bug where podman cp would not copy folders (#2836)
Fixed a bug where Podman would panic when the Varlink API attempted too pull a nonexistent image (#2860)
Fixed a bug where podman rmi sometimes did not produce an event when images were deleted
Fixed a bug where Podman would panic when the Varlink API passed improperly-formatted options when attempting to build (#2869)
Fixed a bug where podman images would not print a header if no images were present (#2877)
Fixed a bug where the podman images command with --filter dangling=false would incorrectly print dangling images instead of images which are not dangling (#2884)
Fixed a bug where rootless Podman would panic when any command was run after the system was rebooted (#2894)
Fixed a bug where Podman containers in user namespaces would include undesired directories from the host in /sys/kernel
Fixed a bug where podman create would panic when trying to create a container whose name already existed
Fixed a bug where podman pull would exit 0 on failing to pull an image (#2785)
Fixed a bug where podman pull would not properly print the cause of errors that occurred (#2710)
Fixed a bug where rootless Podman commands were not properly suspended via ctrl-z in a shell (#2775)
Fixed a bug where Podman would error when cleaning up containers when some container mountpoints in /sys/ were cleaned up already by the closing of the mount namespace
Fixed a bug where podman play kube was not including environment variables from the image run (#2930)
Fixed a bug where podman play kube would not properly clean up partially-created pods when encountering an error
Fixed a bug where podman commit with the --change flag improperly set CMD when a multipart value was provided (#2951)
Fixed a bug where the --mount flag to podman create and podman run did not properly validate its arguments, causing Podman to panic
Fixed a bug where conflicts between mounts created by the --mount, --volume, and --tmpfs flags were not properly reported
Fixed a bug where the --mount flag could not be used with named volumes
Fixed a bug where the --mount flag did not properly set options for created tmpfs filesystems
Fixed a bug where rootless Podman could close too many file descriptors, causing Podman to panic (#2964)
Fixed a bug where podman logout would not print an error when the login was established by docker login (#2735)
Fixed a bug where podman stop would error when not all containers were running (#2993)
Fixed a bug where podman pull would fail to pull images by shortname if they were not present in the docker.io registry
Fixed a bug where podman login would error when credentials were not present if a credential helper was configured (#1675)
Fixed a bug where the podman system renumber command and Podman post-reboot state refreshes would not create events
Fixed a bug where the podman top command was not compatible with docker top syntax

Misc

Updated vendored Buildah to v1.8.2
Updated vendored containers/storage to v1.12.6
Updated vendored containers/psgo to v1.2.1
Updated to sysregistriesv2, including slight changes to the registries.conf config file
Rootless Podman now places all containers within a single user namespace. This change will not take effect for existing containers until containers are restarted, and containers that are not restarted may not be fully usable
The podman run, podman create, podman start, podman restart, podman attach, podman stop, podman port, podman rm, podman top, podman image tree, podman generate kube, podman umount, podman container checkpoint, and podman container restore commands are now available in the remote client
The Podman remote client now builds on Windows
A major refactor of volumes created using the podman volume command was performed. There should be no major user-facing changes, but downgrading from Podman 1.3 to previous versions may render some volumes unable to be removed.
The podman events command now logs events to journald by default. The old behavior (log to file) can be configured in podman.conf via the events_logger option
The podman commit command, in versions 1.2 and earlier, included all volumes mounted into the container as image volumes in the committed image. This behavior was incorrect and has been disabled by default; it can be re-enabled with the --include-volumes flag

1.2.0

Features

Podman now supports image healthchecks! The podman healthcheck run command was added to manually run healthchecks, and the status of a running healthcheck can be viewed via podman inspect
The podman events command was added to show a stream of significant events
The podman ps command now supports a --watch flag that will refresh its output on a given interval
The podman image tree command was added to show a tree representation of an image's layers
The podman logs command can now display logs for multiple containers at the same time (#2219)
The podman exec command can now pass file descriptors to the process being executed in the container via the --preserve-fds option (#2372)
The podman images command can now filter images by reference (#2266)
The podman system df command was added to show disk usage by Podman
The --add-host option can now be used by containers sharing a network namespace (#2504)
The podman cp command now has an --extract option to extract the contents of a Tar archive and copy them into the container, instead of copying the archive itself (#2520)
Podman now allows manually specifying the path of the slirp4netns binary for rootless networking via the --network-cmd-path flag (#2506)
Rootless Podman can now be used with a single UID and GID, without requiring a full 65536 UIDs/GIDs to be allocated in /etc/subuid and /etc/subgid (#1651)
The podman runlabel command now supports the --replace option to replace containers using the name requested
Infrastructure containers for Podman pods will now attempt to use the image's CMD and ENTRYPOINT instead of a fixed command (#2182)
The podman play kube command now supports the HostPath and VolumeMounts YAML fields (#2536)
Added support to disable creation of resolv.conf or /etc/hosts in containers by specifying --dns=none and --no-hosts, respectively, to podman run and podman create (#2744)
The podman version command now supports the {{ json . }} template (which outputs JSON)
Podman can now forward ports using the SCTP protocol

Bugfixes

Fixed a bug where directories could not be passed to podman run --device (#2380)
Fixed a bug where rootless Podman with the --config flag specified would not use appropriate defaults (#2510)
Fixed a bug where rootless Podman containers using the host network (--net=host) would show SELinux as enabled in the container when there were no privileges to use it
Fixed a bug where importing very large images from STDIN could cause Podman to run out of memory
Fixed a bug where some images would fail to run due to symlinks in paths where Podman would normally mount tmpfs filesystems
Fixed a bug where podman play kube would sometimes segfault (#2209)
Fixed a bug where podman runlabel did not respect the $PWD variable (#2171)
Fixed a bug where error messages from refreshing the state in rootless Podman were not properly displayed (#2584)
Fixed a bug where rootless podman build could not access DNS servers when slirp4netns was in use (#2572)
Fixed a bug where rootless podman stop and podman rm would not work on containers which specified a non-root user (#2577)
Fixed a bug where container labels whose values contained commas were incorrectly parsed and caused errors creating containers (#2574)
Fixed a bug where calling Podman with a nonexistent command would exit 0, instead of with an appropriate error code (#2530)
Fixed a bug where rootless podman exec would fail when --user was specified (#2566)
Fixed a bug where, when a container had a name that was a fragment of another container's ID, Podman would refuse to operate on the first container by name
Fixed a bug where podman pod create would fail if a pod shared no namespaces but created an infra container
Fixed a bug where rootless Podman failed on the S390 and CRIS architectures
Fixed a bug where podman rm would exit 0 if no containers specified were found (#2539)
Fixed a bug where podman run would fail to enable networking for containers with additional CNI networks specified (#2795)
Fixed a bug where the podman images command on the remote client was not displaying digests (#2756)
Fixed a bug where Podman was unable to clean up mounts in containers using user namespaces
Fixed a bug where podman image save would, when told to save to a path that exists, return an error, but still delete the file at the given path
Fixed a bug where specifying environment variables containing commas with --env would cause parsing errors (#2712)
Fixed a bug where podman umount would not error if called with no arguments
Fixed a bug where the user and environment variables specified by the image used in containers created by podman create kube was being ignored (#2665)
Fixed a bug where the podman pod inspect command would segfault if not given an argument (#2681)
Fixed a bug where rootless podman pod top would fail (#2682)
Fixed a bug where the podman load command would not error if an input file is not specified and a file was not redirected to STDIN
Fixed a bug where rootless podman could fail if global configuration was altered via flag (for example, --root, --runroot, --storage-driver)
Fixed a bug where forwarded ports that were part of a range (e.g. 20-30) were displayed individually by podman ps, as opposed to together as a range (#1358)
Fixed a bug where podman run --rootfs could panic (#2654)
Fixed a bug where podman build would fail if options were specified after the directory to build (#2636)
Fixed a bug where image volumes made by podman create and podman run would have incorrect permissions (#2634)
Fixed a bug where rootless containers were not using the containers/image blob cache, leading to slower image pulls
Fixed a bug where the podman image inspect command incorrectly allowed the --latest, --type, and --size options

Misc

Updated Buildah to v1.7.2
Updated psgo library to v1.2, featuring greatly improved safety during concurrent use
The podman events command may not show all activity regarding images, as only Podman was instrumented; images created, deleted, or pulled by CRI-O or Buildah will not be shown in podman events
The podman pod top and podman pod stats commands are now usable with the Podman remote client
The podman kill and podman wait commands are now usable with the Podman remote client
Removed the unused restarting state and mapped stopped (also unused) to exited in podman ps --filter status
Podman container, pod, and volume names may now contain the . (period) character

1.1.2

Bugfixes

Fixed a bug where the podman image list, podman image rm, and podman container list had broken global storage options
Fixed a bug where the --label option to podman create and podman run was missing the -l alias
Fixed a bug where running Podman with the --config flag would not set an appropriate default value for tmp_dir (#2408)
Fixed a bug where the podman logs command with the --timestamps flag produced unreadable output (#2500)
Fixed a bug where the podman cp command would automatically extract .tar files copied into the container (#2509)

Misc

The podman container stop command is now usable with the Podman remote client

1.1.1

Bugfixes

Fixed a bug where podman container restore was erroneously available as podman restore (#2191)
Fixed a bug where the volume_path option in libpod.conf was not being respected
Fixed a bug where Podman failed to build when the varlink tag was not present (#2459)
Fixed a bug where the podman image load command was listed twice in help text
Fixed a bug where the podman image sign command was also listed as podman sign
Fixed a bug where the podman image list command incorrectly had an image alias
Fixed a bug where the podman images command incorrectly had ls and list aliases
Fixed a bug where the podman image rm command was being displayed as podman image rmi
Fixed a bug where the podman create command would attempt to parse arguments meant for the container
Fixed a bug where the combination of FIPS mode and user namespaces resulted in permissions errors
Fixed a bug where the --time alias for --timeout for the podman restart and podman stop commands did not function
Fixed a bug where the default stop timeout for newly-created containers was being set to 0 seconds (resulting in an immediate SIGKILL on running podman stop)
Fixed a bug where the output format of podman port was incorrect, printing full container ID instead of truncated ID
Fixed a bug where the podman container list command did not exist
Fixed a bug where podman build could not build a container from images tagged locally that did not exist in a registry (#2469)
Fixed a bug where some Podman commands that accept no arguments would not error when provided arguments
Fixed a bug where podman play kube could not handle cases where a pod and a container shared a name

Misc

Usage text for many commands was greatly improved
Major cleanups were made to Podman manpages, ensuring that command lists are accurate
Greatly improved debugging output when the newuidmap and newgidmap binaries fail when using rootless Podman
The -s alias for the global --storage-driver option has been removed
The podman container refresh command has been deprecated, as its intended use case is no longer relevant. The command has been hidden and manpages deleted. It will be removed in a future release
The podman container runlabel command will now pull images not available locally even without the --pull option. The --pull option has been deprecated
The podman container checkpoint and podman container restore commands are now only available on OCI runtimes where they are supported (e.g. runc)

1.1.0

Features

Added --latest and --all flags to podman mount and podman umount
Rootless Podman can now forward ports into containers (using the same -p and -P flags as root Podman)
Rootless Podman will now pull some configuration options (for example, OCI runtime path) from the default root libpod.conf if they are not explicitly set in the user's own libpod.conf (#2174)
Added an alias -f for the --format flag of the podman info and podman version commands
Added an alias -s for the --size flag of the podman inspect command
Added the podman system info and podman system prune commands
Added the podman cp command to copy files between containers and the host (#613)
Added the --password-stdin flag to podman login
Added the --all-tags flag to podman pull
The --rm and --detach flags can now be used together with podman run
The podman start and podman run commands for containers in pods will now start dependency containers if they are stopped
Added the podman system renumber command to handle lock changes
The --net=host and --dns flags for podman run and podman create no longer conflict
Podman now handles mounting the shared /etc/resolv.conf from network namespaces created by ip netns add when they are passed in via podman run --net=ns:

Bugfixes

Fixed a bug with podman inspect where different information would be returned when the container was running versus when it was stopped
Fixed a bug where errors in Go templates passed to podman inspect were silently ignored instead of reported to the user (#2159)
Fixed a bug where rootless Podman with --pid=host containers was incorrectly masking paths in /proc
Fixed a bug where full errors starting rootless Podman were not reported when a refresh was requested
Fixed a bug where Podman would override the config file-specified storage driver with the driver the backing database was created with without warning users
Fixed a bug where podman prune would prune all images not in use by a container, as opposed to only untagged images, by default (#2192)
Fixed a bug where podman create --quiet and podman run --quiet were not properly suppressing output
Fixed a bug where the table keyword in Go template output of podman ps was not working (#2221)
Fixed a bug where podman inspect on images pulled by digest would double-print @sha256 in output when printing digests (#2086)
Fixed a bug where podman container runlabel will return a non-0 exit code if the label does not exist
Fixed a bug where container state was always reset to Created after a reboot (#1703)
Fixed a bug where /dev/pts was unconditionally overridden in rootless Podman, which was unnecessary except in very specific cases
Fixed a bug where Podman run as root was ignoring some options in /etc/containers/storage.conf (#2217)
Fixed a bug where Podman cleanup processes were not being given the proper OCI runtime path if a custom one was specified
Fixed a bug where podman images --filter dangling=true would crash if no dangling images were present (#2246)
Fixed a bug where podman ps --format "{{.Mounts}}" would not display a container's mounts (#2238)
Fixed a bug where podman pod stats was ignoring Go templates specified by --format (#2258)
Fixed a bug where podman generate kube would fail on containers with --user specified (#2304)
Fixed a bug where podman images displayed incorrect output for images pulled by digest (#2175)
Fixed a bug where podman port and podman ps did not properly display ports if the container joined a network namespace from a pod or another container (#846)
Fixed a bug where detaching from a container using the detach keys would cause Podman to hang until the container exited
Fixed a bug where podman create --rm did not work with podman start --attach
Fixed a bug where invalid named volumes specified in podman create and podman run could cause segfaults (#2301)
Fixed a bug where the runtime field in libpod.conf was being ignored. runtime is legacy and deprecated, but will continue to be respected for the foreseeable future
Fixed a bug where podman login would sometimes report it logged in successfully when it did not
Fixed a bug where podman pod create would not error on receiving unused CLI argument
Fixed a bug where rootless podman run with the --pod argument would fail if the pod was stopped
Fixed a bug where podman images did not print a trailing newline when not invoked on a TTY (#2388)
Fixed a bug where the --runtime option was sometimes not overriding libpod.conf
Fixed a bug where podman pull and podman runlabel would sometimes exit with 0 when they should have exited with an error (#2405)
Fixed a bug where rootless podman export -o would fail (#2381)
Fixed a bug where read-only volumes would fail in rootless Podman when the volume originated on a filesystem mounted nosuid, nodev, or noexec (#2312)
Fixed a bug where some files used by checkpoint and restore received improper SELinux labels (#2334)
Fixed a bug where Podman's volume path was not properly changed when containers/storage changed location (#2395)

Misc

Podman migrated to a new, shared memory locking model in this release. As part of this, if you are running Podman with pods or dependency containers (e.g. --net=container:), you should run the podman system renumber command to migrate your containers to the new model - please reference the podman-system-renumber(1) man page for further details
Podman migrated to a new command-line parsing library, and the output format of help and usage text has somewhat changed as a result
Updated Buildah to v1.7, picking up a number of bugfixes
Updated containers/image library to v1.5, picking up a number of bugfixes and performance improvements to pushing images
Updated containers/storage library to v1.10, picking up a number of bugfixes
Work on the remote Podman client for interacting with Podman remotely over Varlink is progressing steadily, and many image and pod commands are supported - please see the Readme for details
Added path masking to mounts with the :z and :Z options, preventing users from accidentally performing an SELinux relabel of their entire home directory
The podman container runlabel command will not pull an image if it does not contain the requested label
Many commands' usage information now includes examples
podman rm can now delete containers in containers/storage, which can be used to resolve some situations where Podman fails to remove a container
The podman search command now searches multiple registries in parallel for improved performance
The podman build command now defaults --pull-always to true
Containers which share a network namespace (for example, when in a pod) will now share /etc/hosts and /etc/resolv.conf between all containers in the pod, causing changes in one container to propagate to all containers sharing their networks
The podman rm and podman rmi commands now return 1 (instead of 127) when all specified container or images are missing

1.0.0

Features

The podman exec command now includes a --workdir option to set working directory for the executed command
The podman create and podman run commands now support the --init flag to use a minimal init process in the container
Added the podman image sign command to GPG sign images
The podman run --device flag now accepts directories, and will added any device nodes in the directory to the container
Added the podman play kube command to create pods and containers from Kubernetes pod YAML

Bugfixes

Fixed a bug where passing podman create or podman run volumes with an empty host or container path could cause a segfault
Fixed a bug where storage.conf was sometimes ignored for rootless containers
Fixed a bug where Podman run as root would error if CAP_SYS_RESOURCE was not available
Fixed a bug where Podman would fail to start containers after a system restart due to an out-of-date default Apparmor profile
Fixed a bug where Podman's bash completions were not working
Fixed a bug where podman login would use existing login credentials even if new credentials were provided
Fixed a bug where Podman could create some directories with the wrong permissions, breaking containers with user namespaces
Fixed a bug where podman runlabel was not properly setting container names when the --name was specified
Fixed a bug where podman runlabel sometimes included extra spaces in command output
Fixed a bug where podman commit was including invalid port numbers in created images when committing containers with published ports
Fixed a bug where podman exec was not honoring the container's environment variables
Fixed a bug where podman run --device would fail when a symlink to a device was specified
Fixed a bug where podman build was not properly picking up OCI runtime paths specified in libpod.conf
Fixed a bug where Podman would mount /dev/shm into the container read-only for read-only containers (/dev/shm should always be read-write)
Fixed a bug where Podman would ignore any mount whose container mountpoint was /dev/shm
Fixed a bug where podman export did not work with the default fuse-overlayfs storage driver
Fixed a bug where podman inspect -f '{{ json .Config }}' on images would not output anything (it now prints the image's config)
Fixed a bug where podman rmi -fa displayed the wrong error message when trying to remove images used by pod infra containers

Misc

Rootless containers now unconditionally use postrun cleanup processes, ensuring resources are freed when the container stops
A new version of Buildah is included for podman build, featuring improved build speed and numerous bugfixes
Pulling images has been parallelized, allowing individual layers to be pulled in parallel
The podman start --attach command now defaults the sig-proxy option to true, matching podman create and podman run
The podman info command now prints the path of the configuration file controlling container storage
Added podman list and podman ls as aliases for podman ps, and podman container ps and podman container list as aliases for podman container ls
Changed podman generate kube to generate Kubernetes service YAML in the same file as pod YAML, generating a single file instead of two
To improve compatibility with the Docker command line, podman inspect -f '{{ json .ContainerConfig }}' on images is no longer valid; please use podman inspect -f '{{ json .Config }}' instead

0.12.1.2

Bugfixes

Fixed a bug where an empty path for named volumes could make it impossible to create containers
Fixed a bug where containers using another container's network namespace would not also use the other container's /etc/hosts and /etc/resolv.conf
Fixed a bug where containers with --rm which failed to start were not removed
Fixed a potential race condition attempting to read /etc/passwd inside containers

0.12.1.1

Features

Added the podman generate kube command to generate Kubernetes Pod and Service YAML for Podman containers and pods
The podman pod stop flag now accepts a --timeout flag to set the timeout for stopping containers in the pod

Bugfixes

Fixed a bug where rootless Podman would fail to start if the default OCI hooks directory is not present

0.12.1

Features

Rootless Podman now creates the storage.conf, libpod.conf, and mounts.conf configuration files automatically in ~/.config/containers/ for ease of reconfiguration
The podman pod create command can expose ports in the pod's network namespace, allowing public services to be created in pods
The podman container checkpoint command can now keep containers running after they are checkpointed with the --leave-running flag
The podman container checkpoint and podman container restore commands now support the --tcp-established flag to checkpoint and restore containers with active TCP connections
The podman version command now has a --format flag to produce machine-readable output
Added the podman container exists, podman pod exists, and podman image exists commands to easily check for a container/pod/image, respectively, by name or ID
The podman ps --pod flag now has a short alias, -p
The podman rmi and podman rm commands now have a --prune flag to prune unused images and containers, respectively
The podman ps command now has a --sync flag to force a sync of Podman's state against the OCI runtime, resolving some state desync errors
Added the podman volume set of commands for creating and managing local-only named volumes

Bugfixes

Fixed a breaking change in rootless Podman where a change in default paths caused Podman to be unable to function on systems upgraded from 0.10.x or earlier
Fixed a bug where podman exec without -t would still use a terminal if the container was created with -t
Fixed a bug where container root propagation was not being properly adjusted if volumes with root propagation set were mounted into the container
Fixed a bug where podman exec could hold the container lock longer than necessary waiting for an exited container
Fixed a bug where rootless containers using slirp4netns for networking were reporting using bridge networking in podman inspect
Fixed a bug where podman container restore -a was attempting to restore all containers, including created and running ones. It will now only attempt to restore stopped and exited containers
Fixed a bug where rootless Podman detached containers were not being properly cleaned up
Fixed a bug where privileged containers were being mounted with incorrect (too restrictive) mount options such as nodev
Fixed a bug where podman stop would throw an error attempting to stop a container that had already stopped
Fixed a bug where NOTIFY_SOCKET was not properly being passed into Podman containers
Fixed a bug where /dev/shm was not properly mounted in rootless containers
Fixed a bug where rootless Podman would set up the CNI plugins for networking (despite not using them in rootless mode), potentially causing inotify related errors
Fixed a bug where Podman would error on numeric GIDs that do not exist in the container's /etc/group
Fixed a bug where containers in pods or created with --net=container were not mounting /etc/resolv.conf and /etc/hosts

Misc

podman build now defaults the --force-rm flag to true
Improved podman runlabel support for labels featuring arguments with whitespace
Containers without a network namespace will now use the host's resolv.conf
The slirp4netns network mode can now be used with containers running as root. It may be useful for container-in-container scenarios where the outer container does not have host networking set
Podman now uses inotify to wait for container exit files to be created, instead of polling. If inotify cannot be used, Podman will fall back to polling to check if the file has been created
The podman logs command now uses improved short-options handling, allowing its flags to be combined if desired (for example, podman logs -lf instead of podman logs -l -f)
Hardcoded OCI hooks directories used by Podman are now deprecated; they should instead be coded into the libpod.conf configuration file. They can be specified as an array via hooks_dir

0.11.1.1

Bugfixes

Fixed a bug where Podman was not correctly adding firewall rules for containers, preventing them from accessing the network
Fixed a bug where full error messages were being lost when creating containers with user namespaces
Fixed a bug where container state was not properly updated if a failure occurred during network setup, which could cause mounts to be left behind when the container was removed
Fixed a bug where podman exec could time out on slower systems by increasing the relevant timeout

Misc

podman rm -f now removes paused containers. As such, podman rm -af completing successfully guarantees all Podman containers have been removed
Added a field to podman info to show if Podman is being run as rootless
Made a small output format change to podman images - image sizes now feature a space between number and unit (e.g. 123 MB now instead of 123MB)
Vendored an updated version of containers/storage to fix several bugs reported upstream

0.11.1

Features

Added --all and --latest flags to podman checkpoint and podman restore
Added --max-workers flag to all Podman commands that support operating in parallel, allowing the maximum number of parallel workers used to be specified
Added --all flag to podman restart

Bugfixes

Fixed a bug where podman port -l would segfault if no containers were present
Fixed a bug where podman stats -a would error if containers were present but not running
Fixed a bug where container status checks would sometimes leave zombie OCI runtime processes
Fixed checkpoint and restore code to verify an appropriate version of criu is being used
Fixed a bug where environment variables with no specified value (e.g. -e FOO) caused errors (they are now added as empty)
Fixed a bug where rootless Podman would attempt to configure the system firewall, causing errors on some systems where iptables is not in the user's PATH
Fixed a bug where rootless Podman was unable to successfully write the container ID to a file when --cid-file was specified to podman run
Fixed a bug where podman unmount would refuse to unmount a container if it was running (the unmount will now be deferred until the container stops)
Fixed a bug where rootless podman attach would fail to attach due to a too-long path name
Fixed a bug where podman info was not properly reporting the Git commit Podman was built from
Fixed a bug where podman run --interactive was not holding STDIN open when -a flag was specified
Fixed a bug where Podman with the cgroupfs CGroup driver was sometimes not successfully removing pod CGroups
Fixed a bug where rootless Podman was unable to run systemd containers (note that this also requires an update to systemd)
Fixed a bug where podman run with the --user flag would fail if the container image did not contain /etc/passwd or /etc/group

Misc

podman rm, podman restart, podman kill, podman pause, and podman unpause now operate in parallel, greatly improving speed when multiple containers are specified
podman create, podman run, and podman ps have a number of improvements which should greatly increase their speed
Greatly improved performance and reduced memory utilization of container status checks, which should improve the speed of most Podman commands
Improve ability of podman runlabel to run commands that are not Podman
Podman containers with an IP address now add their hostnames to /etc/hosts
Changed default location of temporary libpod files in rootless Podman
Updated the default Podman seccomp profile

Compatibility

Several paths related to rootless Podman had their default values changed in this release. If paths were not hardcoded in libpod.conf, your system may lose track of running containers and believe they are newly-created.

0.10.1.3

Bugfixes

Fixed a bug where podman build would not work while any containers were running

0.10.1.2

Bugfixes

Fixed cgroup mount for containers using systemd as init to work properly with the systemd cgroup manager

0.10.1.1

Features

Added handling for running containers as users with numeric UIDs not present in the container's /etc/passwd. This allows getpwuid() to work inside these containers.
Added support for the REGISTRY_AUTH_FILE environment variable, which specifies the location of credentials for registry login. This is supported by the push, pull, login, logout, runlabel, and search commands

Bugfixes

Fixed handling for image volumes which are mounted on symlinks. The links are now resolved within the container, not on the host
Fixed mounts for containers that use systemd as init to properly include all mounts required by systemd to function

Misc

Updated vendored version of Buildah used to power podman build

0.10.1

Features

Added the podman container checkpoint and podman container restore commands to checkpoint and restore containers
Added the podman container runlabel command to run containers based on commands contained in their images
Added the podman create --ip and podman run --ip flags to allow setting static IPs for containers
Added the podman kill --all flag to send a signal to all running containers

Bugfixes

Fixed Podman cleanup processes for detached containers to properly print debug information when --syslog flag is specified
Fixed manpages for podman create and podman run to document existing --net flag as an alias for --network
Fixed issues with rootless Podman where specifying a single user mapping container was causing all Podman commands to hang
Fixed an issue with rootless Podman not properly detecting when user namespaces were not enabled
Fixed an issue where Podman user namespaces were not preserving file capabilities
Fixed an issue where resolv.conf in container would unconditionally forward nameservers into the container, even localhost
Fixed containers to release resources in the OCI runtime immediately after exiting, improving compatibility with Kata containers
Fixed OCI runtime handling to fix several issues when using gVisor as an OCI runtime
Fixed SELinux relabel errors when starting containers after a system restart
Fixed a crash when initializing hooks on containers running systemd as init
Fixed an SELinux labelling issue with privileged containers
Fixed rootless Podman to raise better errors when using CGroup resource limits, which are not currently compatible with rootless
Fixed a crash when runc was used as the OCI runtime for containers running systemd as init
Fixed SELinux labelling for containers run with --security-opt label=disable to assign the correct label

Misc

Changed flag ordering on all Podman commands to ensure flags are alphabetized
Changed podman stop to work in parallel when multiple containers are specified, greatly speeding up stop for containers that do not stop after SIGINT
Updated vendored version of Buildah used to power podman build
Added version of vendored Buildah to podman info to better debug issues

0.9.3.1

Bugfixes

Fixed a critical issue where SELinux contexts set on tmpfs volumes were causing runc crashes

0.9.3

Features

Added a flag to libpod.conf, label, to globally enable/disable SELinux labelling for libpod
Added --mount flag to podman create and podman run as a new, more explicit way of specifying volume mounts

Bugfixes

Fixed a crash during container creation when an image had no names
Fixed default rootfs mount propagation to for containers to match Docker
Fixed permissions of /proc in containers
Fixed permissions of some default bind mounts (for example, /etc/hosts) in read-only containers
Fixed /dev/shm in --ipc=container and --ipc=host containers to use the correct SHM
Fixed rootless Podman to properly join the namespaces of other containers
Fixed the output of podman diff to not display some default changes that will not be committed
Fixed rootless to better handle cases where insufficient UIDs/GIDs are mapped into the container

0.9.2.1

Bugfixes

Updated Buildah dependency to fix several bugs in podman build

Misc

Small performance improvement in image handling code to not recalculate digests

0.9.2

Features

Added --interval flag to podman wait to determine the interval between checks for container status
Added a switch in libpod.conf to disable reserving ports for running containers. This lowers the safety of port allocations, but can significantly reduce memory usage.
Added ability to search all the contents of a registry if no image name is specified when using podman search

Bugfixes

Further fixes for sharing of UTS namespaces within pods
Fixed a deadlock in containers/storage that could be caused by numerous parallel Podman processes.
Fixed Podman running into open file limits when many ports are forwarded
Fixed default mount propagation on volume mounts
Fixed default mounts under /dev remaining if /dev is bind-mounted into the container
Fixed rootless podman create with no command specified throwing an error

Misc

Added podman rm --volumes flag for compatibility with Docker. As Podman does not presently support named volumes, this does nothing for now, but provides improved compatibility with the Docker command line.
Improved error messages from podman pull

Compatibility

Podman is no longer being built by default with support for the Devicemapper storage driver. If you are using this storage driver, you should investigate switching to overlayfs.

0.9.1.1

Bugfixes

Added support for configuring iptables and firewalld firewalls to allow container traffic. This should resolve numerous issues with network access in containers.

Note

It is recommended that you restart your system firewall after installing this release to clear any firewall rules created by older Podman versions. If port forwarding to containers does not work, it is recommended that you restart your system.

0.9.1

Features

Added initial support for the podman pod command as non-root

Bugfixes

Fixed regression where invalid Podman commands would still cause a clean exit
Fixed podman rmi --all to not error if no images are present on the system
Fixed parsing of container logs with podman logs to properly handle CRI logging, fixing some issues with blank lines in logs
Fixed a bug creating pod cgroups using the systemd cgroup driver with systemd versions 239 and higher
Fixed handling of volume mounts that overlapped with default container mounts (for example, podman run -v /dev/:/dev)
Fixed sharing of UTS namespace in pods

Misc

Added additional debug information when pulling images if --log-level=debug is specified
podman build now defaults to caching intermediate layers while building

0.8.5

Features

Added the ability to add a multipart entrypoint with podman run --entrypoint
Improved help text when invalid commands are specified
Greatly improved support for containers which use systemd as init

Bugfixes

Fixed several bugs with rootless podman exec
Fixed rootless podman with a symlinked storage directory crashing
Fixed bug with podman ps and multiple filters where the interface did not match Docker
Fixed handling of resolv.conf on the host to handle symlinks
Increased open file descriptor and process limits to match Docker and Buildah
Fixed podman run -h to specify the container's hostname (as it does in Docker) instead of printing help text
Fixed a bug with image shortname handling where repositories were incorrectly being treated as registries
Fixed a bug where podman wait was busywaiting and consuming large amounts of CPU

0.8.4

Features

Added the podman pod top command
Added the ability to easily share namespaces within a pod
Added a pod statistics endpoint to the Varlink API
Added information on container capabilities to the output of podman inspect

Bugfixes

Fixed a bug with the --device flag in podman run and podman create
Fixed podman pod stats to accept partial pod IDs and pod names
Fixed a bug with OCI hooks handling ALWAYS matches
Fixed a bug with privileged rootless containers with --net=host set
Fixed a bug where podman exec --user would not work with usernames, only numeric IDs
Fixed a bug where Podman was forwarding both TCP and UDP ports to containers when protocol was not specified
Fixed issues with Apparmor in rootless containers
Fixed an issue with database encoding causing some containers created by Podman versions 0.8.1 and below to be unusable.

Compatibility:

We switched JSON encoding/decoding to a new library for this release to address a compatibility issue introduced by v0.8.2. However, this may cause issues with containers created in 0.8.2 and 0.8.3 with custom DNS servers.

Files

RELEASE_NOTES.md

Latest commit

History

RELEASE_NOTES.md

File metadata and controls

Release Notes

2.2.0

Features

Changes

Bugfixes

API

Misc

2.1.1

Changes

Bugfixes

API

2.1.0

Features

Security

Changes

Bugfixes

API

Misc

2.0.6

Bugfixes

Misc

2.0.5

Features

Changes

Bugfixes

API

Misc

2.0.4

Bugfixes

API

2.0.3

Features

Changes

Bugfixes

API

Misc

2.0.2

Changes

Bugfixes

API

2.0.1

Changes

Bugfixes

API

Misc

2.0.0

Features

Changes

Bugfixes

Misc

1.9.3

Bugfixes

Misc

1.9.2

Bugfixes

Misc

1.9.1

Bugfixes

Misc

1.9.0

Features

Changes

Bugfixes

HTTP API

Misc

1.8.2

Features

Bugfixes

HTTP API

Misc

1.8.1

Features

Bugfixes

HTTP API