Update Kconfig #294

iambrosie · 2016-05-30T22:29:54Z

typo: missing verb.

FadeMind · 2016-05-31T06:01:19Z

@iambrosie FYI
https://www.kernel.org/doc/Documentation/SubmittingPatches
http://kernelnewbies.org/FirstKernelPatch
https://shkspr.mobi/blog/2014/04/submitting-trivial-linux-kernel-patches/

iambrosie · 2016-05-31T22:31:40Z

@FadeMind Thanks, will follow when time allows it.

lkl tools: add symlink support to cptofs

As the kylin had not ready supported it during the short time. Due to kylin enabled the psci will cause crash on bootup. .. [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] Bad mode in prefetch abort handler detected [ 0.000000] Internal error: Oops - bad mode: 0 [#1] SMP ARM [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.4.103 torvalds#294 [ 0.000000] Hardware name: Generic DT based system [ 0.000000] task: c130d040 task.stack: c1300000 [ 0.000000] PC is at 0xa60656a8 [ 0.000000] LR is at __invoke_psci_fn_smc+0x38/0x44 [ 0.000000] pc : [<a60656a8>] lr : [<c0922234>] psr: 600001d6 Change-Id: I2edc8d1becc63e932321698b6d4a6090b527a360 Signed-off-by: Caesar Wang <[email protected]>

This commits adds verifier tests covering per-cpu cgroup storage functionality. There are 6 new tests, which are exactly the same as for shared cgroup storage, but do use per-cpu cgroup storage map. Expected output: $ ./test_verifier #0/u add+sub+mul OK #0/p add+sub+mul OK ... torvalds#286/p invalid cgroup storage access 6 OK torvalds#287/p valid per-cpu cgroup storage access OK torvalds#288/p invalid per-cpu cgroup storage access 1 OK torvalds#289/p invalid per-cpu cgroup storage access 2 OK torvalds#290/p invalid per-cpu cgroup storage access 3 OK torvalds#291/p invalid per-cpu cgroup storage access 4 OK torvalds#292/p invalid per-cpu cgroup storage access 5 OK torvalds#293/p invalid per-cpu cgroup storage access 6 OK torvalds#294/p multiple registers share map_lookup_elem result OK ... torvalds#662/p mov64 src == dst OK torvalds#663/p mov64 src != dst OK Summary: 914 PASSED, 0 SKIPPED, 0 FAILED Signed-off-by: Roman Gushchin <[email protected]> Cc: Daniel Borkmann <[email protected]> Cc: Alexei Starovoitov <[email protected]>

This commits adds verifier tests covering per-cpu cgroup storage functionality. There are 6 new tests, which are exactly the same as for shared cgroup storage, but do use per-cpu cgroup storage map. Expected output: $ ./test_verifier #0/u add+sub+mul OK #0/p add+sub+mul OK ... torvalds#286/p invalid cgroup storage access 6 OK torvalds#287/p valid per-cpu cgroup storage access OK torvalds#288/p invalid per-cpu cgroup storage access 1 OK torvalds#289/p invalid per-cpu cgroup storage access 2 OK torvalds#290/p invalid per-cpu cgroup storage access 3 OK torvalds#291/p invalid per-cpu cgroup storage access 4 OK torvalds#292/p invalid per-cpu cgroup storage access 5 OK torvalds#293/p invalid per-cpu cgroup storage access 6 OK torvalds#294/p multiple registers share map_lookup_elem result OK ... torvalds#662/p mov64 src == dst OK torvalds#663/p mov64 src != dst OK Summary: 914 PASSED, 0 SKIPPED, 0 FAILED Signed-off-by: Roman Gushchin <[email protected]> Acked-by: Song Liu <[email protected]> Cc: Daniel Borkmann <[email protected]> Cc: Alexei Starovoitov <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>

This commits adds verifier tests covering per-cpu cgroup storage functionality. There are 6 new tests, which are exactly the same as for shared cgroup storage, but do use per-cpu cgroup storage map. Expected output: $ ./test_verifier #0/u add+sub+mul OK #0/p add+sub+mul OK ... torvalds#286/p invalid cgroup storage access 6 OK torvalds#287/p valid per-cpu cgroup storage access OK torvalds#288/p invalid per-cpu cgroup storage access 1 OK torvalds#289/p invalid per-cpu cgroup storage access 2 OK torvalds#290/p invalid per-cpu cgroup storage access 3 OK torvalds#291/p invalid per-cpu cgroup storage access 4 OK torvalds#292/p invalid per-cpu cgroup storage access 5 OK torvalds#293/p invalid per-cpu cgroup storage access 6 OK torvalds#294/p multiple registers share map_lookup_elem result OK ... torvalds#662/p mov64 src == dst OK torvalds#663/p mov64 src != dst OK Summary: 914 PASSED, 0 SKIPPED, 0 FAILED Signed-off-by: Roman Gushchin <[email protected]> Acked-by: Song Liu <[email protected]> Cc: Daniel Borkmann <[email protected]> Cc: Alexei Starovoitov <[email protected]>

This commits adds verifier tests covering per-cpu cgroup storage functionality. There are 6 new tests, which are exactly the same as for shared cgroup storage, but do use per-cpu cgroup storage map. Expected output: $ ./test_verifier #0/u add+sub+mul OK #0/p add+sub+mul OK ... torvalds#286/p invalid cgroup storage access 6 OK torvalds#287/p valid per-cpu cgroup storage access OK torvalds#288/p invalid per-cpu cgroup storage access 1 OK torvalds#289/p invalid per-cpu cgroup storage access 2 OK torvalds#290/p invalid per-cpu cgroup storage access 3 OK torvalds#291/p invalid per-cpu cgroup storage access 4 OK torvalds#292/p invalid per-cpu cgroup storage access 5 OK torvalds#293/p invalid per-cpu cgroup storage access 6 OK torvalds#294/p multiple registers share map_lookup_elem result OK ... torvalds#662/p mov64 src == dst OK torvalds#663/p mov64 src != dst OK Summary: 914 PASSED, 0 SKIPPED, 0 FAILED Signed-off-by: Roman Gushchin <[email protected]> Acked-by: Song Liu <[email protected]> Cc: Daniel Borkmann <[email protected]> Cc: Alexei Starovoitov <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>

WARNING: please, no spaces at the start of a line torvalds#249: FILE: mm/page-writeback.c:2089: + {$ ERROR: code indent should use tabs where possible torvalds#250: FILE: mm/page-writeback.c:2090: + .procname = "dirty_background_ratio",$ WARNING: please, no spaces at the start of a line torvalds#250: FILE: mm/page-writeback.c:2090: + .procname = "dirty_background_ratio",$ ERROR: code indent should use tabs where possible torvalds#251: FILE: mm/page-writeback.c:2091: + .data = &dirty_background_ratio,$ WARNING: please, no spaces at the start of a line torvalds#251: FILE: mm/page-writeback.c:2091: + .data = &dirty_background_ratio,$ ERROR: code indent should use tabs where possible torvalds#252: FILE: mm/page-writeback.c:2092: + .maxlen = sizeof(dirty_background_ratio),$ WARNING: please, no spaces at the start of a line torvalds#252: FILE: mm/page-writeback.c:2092: + .maxlen = sizeof(dirty_background_ratio),$ ERROR: code indent should use tabs where possible torvalds#253: FILE: mm/page-writeback.c:2093: + .mode = 0644,$ WARNING: please, no spaces at the start of a line torvalds#253: FILE: mm/page-writeback.c:2093: + .mode = 0644,$ ERROR: code indent should use tabs where possible torvalds#254: FILE: mm/page-writeback.c:2094: + .proc_handler = dirty_background_ratio_handler,$ WARNING: please, no spaces at the start of a line torvalds#254: FILE: mm/page-writeback.c:2094: + .proc_handler = dirty_background_ratio_handler,$ ERROR: code indent should use tabs where possible torvalds#255: FILE: mm/page-writeback.c:2095: + .extra1 = SYSCTL_ZERO,$ WARNING: please, no spaces at the start of a line torvalds#255: FILE: mm/page-writeback.c:2095: + .extra1 = SYSCTL_ZERO,$ ERROR: code indent should use tabs where possible torvalds#256: FILE: mm/page-writeback.c:2096: + .extra2 = SYSCTL_ONE_HUNDRED,$ WARNING: please, no spaces at the start of a line torvalds#256: FILE: mm/page-writeback.c:2096: + .extra2 = SYSCTL_ONE_HUNDRED,$ WARNING: please, no spaces at the start of a line torvalds#257: FILE: mm/page-writeback.c:2097: + },$ WARNING: please, no spaces at the start of a line torvalds#258: FILE: mm/page-writeback.c:2098: + {$ ERROR: code indent should use tabs where possible torvalds#259: FILE: mm/page-writeback.c:2099: + .procname = "dirty_background_bytes",$ WARNING: please, no spaces at the start of a line torvalds#259: FILE: mm/page-writeback.c:2099: + .procname = "dirty_background_bytes",$ ERROR: code indent should use tabs where possible torvalds#260: FILE: mm/page-writeback.c:2100: + .data = &dirty_background_bytes,$ WARNING: please, no spaces at the start of a line torvalds#260: FILE: mm/page-writeback.c:2100: + .data = &dirty_background_bytes,$ ERROR: code indent should use tabs where possible torvalds#261: FILE: mm/page-writeback.c:2101: + .maxlen = sizeof(dirty_background_bytes),$ WARNING: please, no spaces at the start of a line torvalds#261: FILE: mm/page-writeback.c:2101: + .maxlen = sizeof(dirty_background_bytes),$ ERROR: code indent should use tabs where possible torvalds#262: FILE: mm/page-writeback.c:2102: + .mode = 0644,$ WARNING: please, no spaces at the start of a line torvalds#262: FILE: mm/page-writeback.c:2102: + .mode = 0644,$ ERROR: code indent should use tabs where possible torvalds#263: FILE: mm/page-writeback.c:2103: + .proc_handler = dirty_background_bytes_handler,$ WARNING: please, no spaces at the start of a line torvalds#263: FILE: mm/page-writeback.c:2103: + .proc_handler = dirty_background_bytes_handler,$ ERROR: code indent should use tabs where possible torvalds#264: FILE: mm/page-writeback.c:2104: + .extra1 = SYSCTL_LONG_ONE,$ WARNING: please, no spaces at the start of a line torvalds#264: FILE: mm/page-writeback.c:2104: + .extra1 = SYSCTL_LONG_ONE,$ WARNING: please, no spaces at the start of a line torvalds#265: FILE: mm/page-writeback.c:2105: + },$ WARNING: please, no spaces at the start of a line torvalds#266: FILE: mm/page-writeback.c:2106: + {$ ERROR: code indent should use tabs where possible torvalds#267: FILE: mm/page-writeback.c:2107: + .procname = "dirty_ratio",$ WARNING: please, no spaces at the start of a line torvalds#267: FILE: mm/page-writeback.c:2107: + .procname = "dirty_ratio",$ ERROR: code indent should use tabs where possible torvalds#268: FILE: mm/page-writeback.c:2108: + .data = &vm_dirty_ratio,$ WARNING: please, no spaces at the start of a line torvalds#268: FILE: mm/page-writeback.c:2108: + .data = &vm_dirty_ratio,$ ERROR: code indent should use tabs where possible torvalds#269: FILE: mm/page-writeback.c:2109: + .maxlen = sizeof(vm_dirty_ratio),$ WARNING: please, no spaces at the start of a line torvalds#269: FILE: mm/page-writeback.c:2109: + .maxlen = sizeof(vm_dirty_ratio),$ ERROR: code indent should use tabs where possible torvalds#270: FILE: mm/page-writeback.c:2110: + .mode = 0644,$ WARNING: please, no spaces at the start of a line torvalds#270: FILE: mm/page-writeback.c:2110: + .mode = 0644,$ ERROR: code indent should use tabs where possible torvalds#271: FILE: mm/page-writeback.c:2111: + .proc_handler = dirty_ratio_handler,$ WARNING: please, no spaces at the start of a line torvalds#271: FILE: mm/page-writeback.c:2111: + .proc_handler = dirty_ratio_handler,$ ERROR: code indent should use tabs where possible torvalds#272: FILE: mm/page-writeback.c:2112: + .extra1 = SYSCTL_ZERO,$ WARNING: please, no spaces at the start of a line torvalds#272: FILE: mm/page-writeback.c:2112: + .extra1 = SYSCTL_ZERO,$ ERROR: code indent should use tabs where possible torvalds#273: FILE: mm/page-writeback.c:2113: + .extra2 = SYSCTL_ONE_HUNDRED,$ WARNING: please, no spaces at the start of a line torvalds#273: FILE: mm/page-writeback.c:2113: + .extra2 = SYSCTL_ONE_HUNDRED,$ WARNING: please, no spaces at the start of a line torvalds#274: FILE: mm/page-writeback.c:2114: + },$ WARNING: please, no spaces at the start of a line torvalds#275: FILE: mm/page-writeback.c:2115: + {$ ERROR: code indent should use tabs where possible torvalds#276: FILE: mm/page-writeback.c:2116: + .procname = "dirty_bytes",$ WARNING: please, no spaces at the start of a line torvalds#276: FILE: mm/page-writeback.c:2116: + .procname = "dirty_bytes",$ ERROR: code indent should use tabs where possible torvalds#277: FILE: mm/page-writeback.c:2117: + .data = &vm_dirty_bytes,$ WARNING: please, no spaces at the start of a line torvalds#277: FILE: mm/page-writeback.c:2117: + .data = &vm_dirty_bytes,$ ERROR: code indent should use tabs where possible torvalds#278: FILE: mm/page-writeback.c:2118: + .maxlen = sizeof(vm_dirty_bytes),$ WARNING: please, no spaces at the start of a line torvalds#278: FILE: mm/page-writeback.c:2118: + .maxlen = sizeof(vm_dirty_bytes),$ ERROR: code indent should use tabs where possible torvalds#279: FILE: mm/page-writeback.c:2119: + .mode = 0644,$ WARNING: please, no spaces at the start of a line torvalds#279: FILE: mm/page-writeback.c:2119: + .mode = 0644,$ ERROR: code indent should use tabs where possible torvalds#280: FILE: mm/page-writeback.c:2120: + .proc_handler = dirty_bytes_handler,$ WARNING: please, no spaces at the start of a line torvalds#280: FILE: mm/page-writeback.c:2120: + .proc_handler = dirty_bytes_handler,$ ERROR: code indent should use tabs where possible torvalds#281: FILE: mm/page-writeback.c:2121: + .extra1 = (void *)&dirty_bytes_min,$ WARNING: please, no spaces at the start of a line torvalds#281: FILE: mm/page-writeback.c:2121: + .extra1 = (void *)&dirty_bytes_min,$ WARNING: please, no spaces at the start of a line torvalds#282: FILE: mm/page-writeback.c:2122: + },$ WARNING: please, no spaces at the start of a line torvalds#283: FILE: mm/page-writeback.c:2123: + {$ ERROR: code indent should use tabs where possible torvalds#284: FILE: mm/page-writeback.c:2124: + .procname = "dirty_writeback_centisecs",$ WARNING: please, no spaces at the start of a line torvalds#284: FILE: mm/page-writeback.c:2124: + .procname = "dirty_writeback_centisecs",$ ERROR: code indent should use tabs where possible torvalds#285: FILE: mm/page-writeback.c:2125: + .data = &dirty_writeback_interval,$ WARNING: please, no spaces at the start of a line torvalds#285: FILE: mm/page-writeback.c:2125: + .data = &dirty_writeback_interval,$ ERROR: code indent should use tabs where possible torvalds#286: FILE: mm/page-writeback.c:2126: + .maxlen = sizeof(dirty_writeback_interval),$ WARNING: please, no spaces at the start of a line torvalds#286: FILE: mm/page-writeback.c:2126: + .maxlen = sizeof(dirty_writeback_interval),$ ERROR: code indent should use tabs where possible torvalds#287: FILE: mm/page-writeback.c:2127: + .mode = 0644,$ WARNING: please, no spaces at the start of a line torvalds#287: FILE: mm/page-writeback.c:2127: + .mode = 0644,$ ERROR: code indent should use tabs where possible torvalds#288: FILE: mm/page-writeback.c:2128: + .proc_handler = dirty_writeback_centisecs_handler,$ WARNING: please, no spaces at the start of a line torvalds#288: FILE: mm/page-writeback.c:2128: + .proc_handler = dirty_writeback_centisecs_handler,$ WARNING: please, no spaces at the start of a line torvalds#289: FILE: mm/page-writeback.c:2129: + },$ WARNING: please, no spaces at the start of a line torvalds#290: FILE: mm/page-writeback.c:2130: + {$ ERROR: code indent should use tabs where possible torvalds#291: FILE: mm/page-writeback.c:2131: + .procname = "dirty_expire_centisecs",$ WARNING: please, no spaces at the start of a line torvalds#291: FILE: mm/page-writeback.c:2131: + .procname = "dirty_expire_centisecs",$ ERROR: code indent should use tabs where possible torvalds#292: FILE: mm/page-writeback.c:2132: + .data = &dirty_expire_interval,$ WARNING: please, no spaces at the start of a line torvalds#292: FILE: mm/page-writeback.c:2132: + .data = &dirty_expire_interval,$ ERROR: code indent should use tabs where possible torvalds#293: FILE: mm/page-writeback.c:2133: + .maxlen = sizeof(dirty_expire_interval),$ WARNING: please, no spaces at the start of a line torvalds#293: FILE: mm/page-writeback.c:2133: + .maxlen = sizeof(dirty_expire_interval),$ ERROR: code indent should use tabs where possible torvalds#294: FILE: mm/page-writeback.c:2134: + .mode = 0644,$ WARNING: please, no spaces at the start of a line torvalds#294: FILE: mm/page-writeback.c:2134: + .mode = 0644,$ ERROR: code indent should use tabs where possible torvalds#295: FILE: mm/page-writeback.c:2135: + .proc_handler = proc_dointvec_minmax,$ WARNING: please, no spaces at the start of a line torvalds#295: FILE: mm/page-writeback.c:2135: + .proc_handler = proc_dointvec_minmax,$ ERROR: code indent should use tabs where possible torvalds#296: FILE: mm/page-writeback.c:2136: + .extra1 = SYSCTL_ZERO,$ WARNING: please, no spaces at the start of a line torvalds#296: FILE: mm/page-writeback.c:2136: + .extra1 = SYSCTL_ZERO,$ WARNING: please, no spaces at the start of a line torvalds#297: FILE: mm/page-writeback.c:2137: + },$ total: 37 errors, 49 warnings, 287 lines checked NOTE: For some of the reported defects, checkpatch may be able to mechanically convert to the typical style using --fix or --fix-inplace. NOTE: Whitespace errors detected. You may wish to use scripts/cleanpatch or scripts/cleanfile ./patches/mm-move-page-writeback-sysctls-to-is-own-file.patch has style problems, please review. NOTE: If any of the errors are false positives, please report them to the maintainer, see CHECKPATCH in MAINTAINERS. Please run checkpatch prior to sending patches Cc: Iurii Zaikin <[email protected]> Cc: Kees Cook <[email protected]> Cc: Luis Chamberlain <[email protected]> Cc: zhanglianjie <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Stephen Rothwell <[email protected]>

WARNING: please, no spaces at the start of a line torvalds#249: FILE: mm/page-writeback.c:2089: + {$ ERROR: code indent should use tabs where possible torvalds#250: FILE: mm/page-writeback.c:2090: + .procname = "dirty_background_ratio",$ WARNING: please, no spaces at the start of a line torvalds#250: FILE: mm/page-writeback.c:2090: + .procname = "dirty_background_ratio",$ ERROR: code indent should use tabs where possible torvalds#251: FILE: mm/page-writeback.c:2091: + .data = &dirty_background_ratio,$ WARNING: please, no spaces at the start of a line torvalds#251: FILE: mm/page-writeback.c:2091: + .data = &dirty_background_ratio,$ ERROR: code indent should use tabs where possible torvalds#252: FILE: mm/page-writeback.c:2092: + .maxlen = sizeof(dirty_background_ratio),$ WARNING: please, no spaces at the start of a line torvalds#252: FILE: mm/page-writeback.c:2092: + .maxlen = sizeof(dirty_background_ratio),$ ERROR: code indent should use tabs where possible torvalds#253: FILE: mm/page-writeback.c:2093: + .mode = 0644,$ WARNING: please, no spaces at the start of a line torvalds#253: FILE: mm/page-writeback.c:2093: + .mode = 0644,$ ERROR: code indent should use tabs where possible torvalds#254: FILE: mm/page-writeback.c:2094: + .proc_handler = dirty_background_ratio_handler,$ WARNING: please, no spaces at the start of a line torvalds#254: FILE: mm/page-writeback.c:2094: + .proc_handler = dirty_background_ratio_handler,$ ERROR: code indent should use tabs where possible torvalds#255: FILE: mm/page-writeback.c:2095: + .extra1 = SYSCTL_ZERO,$ WARNING: please, no spaces at the start of a line torvalds#255: FILE: mm/page-writeback.c:2095: + .extra1 = SYSCTL_ZERO,$ ERROR: code indent should use tabs where possible torvalds#256: FILE: mm/page-writeback.c:2096: + .extra2 = SYSCTL_ONE_HUNDRED,$ WARNING: please, no spaces at the start of a line torvalds#256: FILE: mm/page-writeback.c:2096: + .extra2 = SYSCTL_ONE_HUNDRED,$ WARNING: please, no spaces at the start of a line torvalds#257: FILE: mm/page-writeback.c:2097: + },$ WARNING: please, no spaces at the start of a line torvalds#258: FILE: mm/page-writeback.c:2098: + {$ ERROR: code indent should use tabs where possible torvalds#259: FILE: mm/page-writeback.c:2099: + .procname = "dirty_background_bytes",$ WARNING: please, no spaces at the start of a line torvalds#259: FILE: mm/page-writeback.c:2099: + .procname = "dirty_background_bytes",$ ERROR: code indent should use tabs where possible torvalds#260: FILE: mm/page-writeback.c:2100: + .data = &dirty_background_bytes,$ WARNING: please, no spaces at the start of a line torvalds#260: FILE: mm/page-writeback.c:2100: + .data = &dirty_background_bytes,$ ERROR: code indent should use tabs where possible torvalds#261: FILE: mm/page-writeback.c:2101: + .maxlen = sizeof(dirty_background_bytes),$ WARNING: please, no spaces at the start of a line torvalds#261: FILE: mm/page-writeback.c:2101: + .maxlen = sizeof(dirty_background_bytes),$ ERROR: code indent should use tabs where possible torvalds#262: FILE: mm/page-writeback.c:2102: + .mode = 0644,$ WARNING: please, no spaces at the start of a line torvalds#262: FILE: mm/page-writeback.c:2102: + .mode = 0644,$ ERROR: code indent should use tabs where possible torvalds#263: FILE: mm/page-writeback.c:2103: + .proc_handler = dirty_background_bytes_handler,$ WARNING: please, no spaces at the start of a line torvalds#263: FILE: mm/page-writeback.c:2103: + .proc_handler = dirty_background_bytes_handler,$ ERROR: code indent should use tabs where possible torvalds#264: FILE: mm/page-writeback.c:2104: + .extra1 = SYSCTL_LONG_ONE,$ WARNING: please, no spaces at the start of a line torvalds#264: FILE: mm/page-writeback.c:2104: + .extra1 = SYSCTL_LONG_ONE,$ WARNING: please, no spaces at the start of a line torvalds#265: FILE: mm/page-writeback.c:2105: + },$ WARNING: please, no spaces at the start of a line torvalds#266: FILE: mm/page-writeback.c:2106: + {$ ERROR: code indent should use tabs where possible torvalds#267: FILE: mm/page-writeback.c:2107: + .procname = "dirty_ratio",$ WARNING: please, no spaces at the start of a line torvalds#267: FILE: mm/page-writeback.c:2107: + .procname = "dirty_ratio",$ ERROR: code indent should use tabs where possible torvalds#268: FILE: mm/page-writeback.c:2108: + .data = &vm_dirty_ratio,$ WARNING: please, no spaces at the start of a line torvalds#268: FILE: mm/page-writeback.c:2108: + .data = &vm_dirty_ratio,$ ERROR: code indent should use tabs where possible torvalds#269: FILE: mm/page-writeback.c:2109: + .maxlen = sizeof(vm_dirty_ratio),$ WARNING: please, no spaces at the start of a line torvalds#269: FILE: mm/page-writeback.c:2109: + .maxlen = sizeof(vm_dirty_ratio),$ ERROR: code indent should use tabs where possible torvalds#270: FILE: mm/page-writeback.c:2110: + .mode = 0644,$ WARNING: please, no spaces at the start of a line torvalds#270: FILE: mm/page-writeback.c:2110: + .mode = 0644,$ ERROR: code indent should use tabs where possible torvalds#271: FILE: mm/page-writeback.c:2111: + .proc_handler = dirty_ratio_handler,$ WARNING: please, no spaces at the start of a line torvalds#271: FILE: mm/page-writeback.c:2111: + .proc_handler = dirty_ratio_handler,$ ERROR: code indent should use tabs where possible torvalds#272: FILE: mm/page-writeback.c:2112: + .extra1 = SYSCTL_ZERO,$ WARNING: please, no spaces at the start of a line torvalds#272: FILE: mm/page-writeback.c:2112: + .extra1 = SYSCTL_ZERO,$ ERROR: code indent should use tabs where possible torvalds#273: FILE: mm/page-writeback.c:2113: + .extra2 = SYSCTL_ONE_HUNDRED,$ WARNING: please, no spaces at the start of a line torvalds#273: FILE: mm/page-writeback.c:2113: + .extra2 = SYSCTL_ONE_HUNDRED,$ WARNING: please, no spaces at the start of a line torvalds#274: FILE: mm/page-writeback.c:2114: + },$ WARNING: please, no spaces at the start of a line torvalds#275: FILE: mm/page-writeback.c:2115: + {$ ERROR: code indent should use tabs where possible torvalds#276: FILE: mm/page-writeback.c:2116: + .procname = "dirty_bytes",$ WARNING: please, no spaces at the start of a line torvalds#276: FILE: mm/page-writeback.c:2116: + .procname = "dirty_bytes",$ ERROR: code indent should use tabs where possible torvalds#277: FILE: mm/page-writeback.c:2117: + .data = &vm_dirty_bytes,$ WARNING: please, no spaces at the start of a line torvalds#277: FILE: mm/page-writeback.c:2117: + .data = &vm_dirty_bytes,$ ERROR: code indent should use tabs where possible torvalds#278: FILE: mm/page-writeback.c:2118: + .maxlen = sizeof(vm_dirty_bytes),$ WARNING: please, no spaces at the start of a line torvalds#278: FILE: mm/page-writeback.c:2118: + .maxlen = sizeof(vm_dirty_bytes),$ ERROR: code indent should use tabs where possible torvalds#279: FILE: mm/page-writeback.c:2119: + .mode = 0644,$ WARNING: please, no spaces at the start of a line torvalds#279: FILE: mm/page-writeback.c:2119: + .mode = 0644,$ ERROR: code indent should use tabs where possible torvalds#280: FILE: mm/page-writeback.c:2120: + .proc_handler = dirty_bytes_handler,$ WARNING: please, no spaces at the start of a line torvalds#280: FILE: mm/page-writeback.c:2120: + .proc_handler = dirty_bytes_handler,$ ERROR: code indent should use tabs where possible torvalds#281: FILE: mm/page-writeback.c:2121: + .extra1 = (void *)&dirty_bytes_min,$ WARNING: please, no spaces at the start of a line torvalds#281: FILE: mm/page-writeback.c:2121: + .extra1 = (void *)&dirty_bytes_min,$ WARNING: please, no spaces at the start of a line torvalds#282: FILE: mm/page-writeback.c:2122: + },$ WARNING: please, no spaces at the start of a line torvalds#283: FILE: mm/page-writeback.c:2123: + {$ ERROR: code indent should use tabs where possible torvalds#284: FILE: mm/page-writeback.c:2124: + .procname = "dirty_writeback_centisecs",$ WARNING: please, no spaces at the start of a line torvalds#284: FILE: mm/page-writeback.c:2124: + .procname = "dirty_writeback_centisecs",$ ERROR: code indent should use tabs where possible torvalds#285: FILE: mm/page-writeback.c:2125: + .data = &dirty_writeback_interval,$ WARNING: please, no spaces at the start of a line torvalds#285: FILE: mm/page-writeback.c:2125: + .data = &dirty_writeback_interval,$ ERROR: code indent should use tabs where possible torvalds#286: FILE: mm/page-writeback.c:2126: + .maxlen = sizeof(dirty_writeback_interval),$ WARNING: please, no spaces at the start of a line torvalds#286: FILE: mm/page-writeback.c:2126: + .maxlen = sizeof(dirty_writeback_interval),$ ERROR: code indent should use tabs where possible torvalds#287: FILE: mm/page-writeback.c:2127: + .mode = 0644,$ WARNING: please, no spaces at the start of a line torvalds#287: FILE: mm/page-writeback.c:2127: + .mode = 0644,$ ERROR: code indent should use tabs where possible torvalds#288: FILE: mm/page-writeback.c:2128: + .proc_handler = dirty_writeback_centisecs_handler,$ WARNING: please, no spaces at the start of a line torvalds#288: FILE: mm/page-writeback.c:2128: + .proc_handler = dirty_writeback_centisecs_handler,$ WARNING: please, no spaces at the start of a line torvalds#289: FILE: mm/page-writeback.c:2129: + },$ WARNING: please, no spaces at the start of a line torvalds#290: FILE: mm/page-writeback.c:2130: + {$ ERROR: code indent should use tabs where possible torvalds#291: FILE: mm/page-writeback.c:2131: + .procname = "dirty_expire_centisecs",$ WARNING: please, no spaces at the start of a line torvalds#291: FILE: mm/page-writeback.c:2131: + .procname = "dirty_expire_centisecs",$ ERROR: code indent should use tabs where possible torvalds#292: FILE: mm/page-writeback.c:2132: + .data = &dirty_expire_interval,$ WARNING: please, no spaces at the start of a line torvalds#292: FILE: mm/page-writeback.c:2132: + .data = &dirty_expire_interval,$ ERROR: code indent should use tabs where possible torvalds#293: FILE: mm/page-writeback.c:2133: + .maxlen = sizeof(dirty_expire_interval),$ WARNING: please, no spaces at the start of a line torvalds#293: FILE: mm/page-writeback.c:2133: + .maxlen = sizeof(dirty_expire_interval),$ ERROR: code indent should use tabs where possible torvalds#294: FILE: mm/page-writeback.c:2134: + .mode = 0644,$ WARNING: please, no spaces at the start of a line torvalds#294: FILE: mm/page-writeback.c:2134: + .mode = 0644,$ ERROR: code indent should use tabs where possible torvalds#295: FILE: mm/page-writeback.c:2135: + .proc_handler = proc_dointvec_minmax,$ WARNING: please, no spaces at the start of a line torvalds#295: FILE: mm/page-writeback.c:2135: + .proc_handler = proc_dointvec_minmax,$ ERROR: code indent should use tabs where possible torvalds#296: FILE: mm/page-writeback.c:2136: + .extra1 = SYSCTL_ZERO,$ WARNING: please, no spaces at the start of a line torvalds#296: FILE: mm/page-writeback.c:2136: + .extra1 = SYSCTL_ZERO,$ WARNING: please, no spaces at the start of a line torvalds#297: FILE: mm/page-writeback.c:2137: + },$ total: 37 errors, 49 warnings, 287 lines checked NOTE: For some of the reported defects, checkpatch may be able to mechanically convert to the typical style using --fix or --fix-inplace. NOTE: Whitespace errors detected. You may wish to use scripts/cleanpatch or scripts/cleanfile ./patches/mm-move-page-writeback-sysctls-to-is-own-file.patch has style problems, please review. NOTE: If any of the errors are false positives, please report them to the maintainer, see CHECKPATCH in MAINTAINERS. Please run checkpatch prior to sending patches Cc: Iurii Zaikin <[email protected]> Cc: Kees Cook <[email protected]> Cc: Luis Chamberlain <[email protected]> Cc: zhanglianjie <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Mark Brown <[email protected]>

The rounddown_pow_of_two(0) is undefined, so val = 0 is not allowed in the fault_around_bytes_set(), and leads to shift-out-of-bounds, UBSAN: shift-out-of-bounds in include/linux/log2.h:67:13 shift exponent 4294967295 is too large for 64-bit type 'long unsigned int' CPU: 7 PID: 107 Comm: sh Not tainted 6.8.0-rc6-next-20240301 torvalds#294 Hardware name: QEMU QEMU Virtual Machine, BIOS 0.0.0 02/06/2015 Call trace: dump_backtrace+0x94/0xec show_stack+0x18/0x24 dump_stack_lvl+0x78/0x90 dump_stack+0x18/0x24 ubsan_epilogue+0x10/0x44 __ubsan_handle_shift_out_of_bounds+0x98/0x134 fault_around_bytes_set+0xa4/0xb0 simple_attr_write_xsigned.isra.0+0xe4/0x1ac simple_attr_write+0x18/0x24 debugfs_attr_write+0x4c/0x98 vfs_write+0xd0/0x4b0 ksys_write+0x6c/0xfc __arm64_sys_write+0x1c/0x28 invoke_syscall+0x44/0x104 el0_svc_common.constprop.0+0x40/0xe0 do_el0_svc+0x1c/0x28 el0_svc+0x34/0xdc el0t_64_sync_handler+0xc0/0xc4 el0t_64_sync+0x190/0x194 ---[ end trace ]--- Fix it by setting the minimum val to PAGE_SIZE. Link: https://lkml.kernel.org/r/[email protected] Fixes: 53d36a5 ("mm: prefer fault_around_pages to fault_around_bytes") Signed-off-by: Kefeng Wang <[email protected]> Reported-by: Yue Sun <[email protected]> Closes: https://lore.kernel.org/all/CAEkJfYPim6DQqW1GqCiHLdh2-eweqk1fGyXqs3JM+8e1qGge8w@mail.gmail.com/ Reviewed-by: Lorenzo Stoakes <[email protected]> Signed-off-by: Andrew Morton <[email protected]>

Update Kconfig

e35a40e

typo: missing verb.

iambrosie closed this May 31, 2016

laijs pushed a commit to laijs/linux that referenced this pull request Feb 13, 2017

Merge pull request torvalds#294 from copumpkin/cptofs-symlinks

6c7ad3e

lkl tools: add symlink support to cptofs

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Update Kconfig #294

Update Kconfig #294

iambrosie commented May 30, 2016

FadeMind commented May 31, 2016

iambrosie commented May 31, 2016

Update Kconfig #294

Update Kconfig #294

Conversation

iambrosie commented May 30, 2016

FadeMind commented May 31, 2016

iambrosie commented May 31, 2016