Credits #268

rdcaceres · 2016-03-24T21:04:33Z

No description provided.

jogacolhue · 2016-03-30T17:37:21Z

It has to be in the "D" section, the list is in alphabetical order.

Liu Bo <[email protected]> reported a lockdep warning of delayed_iput_sem in xfstests generic/241: [ 2061.345955] ============================================= [ 2061.346027] [ INFO: possible recursive locking detected ] [ 2061.346027] 4.1.0+ torvalds#268 Tainted: G W [ 2061.346027] --------------------------------------------- [ 2061.346027] btrfs-cleaner/3045 is trying to acquire lock: [ 2061.346027] (&fs_info->delayed_iput_sem){++++..}, at: [<ffffffff814063ab>] btrfs_run_delayed_iputs+0x6b/0x100 [ 2061.346027] but task is already holding lock: [ 2061.346027] (&fs_info->delayed_iput_sem){++++..}, at: [<ffffffff814063ab>] btrfs_run_delayed_iputs+0x6b/0x100 [ 2061.346027] other info that might help us debug this: [ 2061.346027] Possible unsafe locking scenario: [ 2061.346027] CPU0 [ 2061.346027] ---- [ 2061.346027] lock(&fs_info->delayed_iput_sem); [ 2061.346027] lock(&fs_info->delayed_iput_sem); [ 2061.346027] *** DEADLOCK *** It is rarely happened, about 1/400 in my test env. The reason is recursion of btrfs_run_delayed_iputs(): cleaner_kthread -> btrfs_run_delayed_iputs() *1 -> get delayed_iput_sem lock *2 -> iput() -> ... -> btrfs_commit_transaction() -> btrfs_run_delayed_iputs() *1 -> get delayed_iput_sem lock (dead lock) *2 *1: recursion of btrfs_run_delayed_iputs() *2: warning of lockdep about delayed_iput_sem When fs is in high stress, new iputs may added into fs_info->delayed_iputs list when btrfs_run_delayed_iputs() is running, which cause second btrfs_run_delayed_iputs() run into down_read(&fs_info->delayed_iput_sem) again, and cause above lockdep warning. Actually, it will not cause real problem because both locks are read lock, but to avoid lockdep warning, we can do a fix. Fix: Don't do btrfs_run_delayed_iputs() in btrfs_commit_transaction() for cleaner_kthread thread to break above recursion path. cleaner_kthread is calling btrfs_run_delayed_iputs() explicitly in code, and don't need to call btrfs_run_delayed_iputs() again in btrfs_commit_transaction(), it also give us a bonus to avoid stack overflow. Test: No above lockdep warning after patch in 1200 generic/241 tests. Reported-by: Liu Bo <[email protected]> Signed-off-by: Zhao Lei <[email protected]> Reviewed-by: Liu Bo <[email protected]> Signed-off-by: Chris Mason <[email protected]>

lkl: follow RENAMEAT changes from linus upstream tree

split __bpf_prog_run() interpreter into stack allocation and execution parts. The code section shrinks which helps interpreter performance in some cases. text data bss dec hex filename 26350 10328 624 37302 91b6 kernel/bpf/core.o.before 25777 10328 624 36729 8f79 kernel/bpf/core.o.after Very short programs got slower (due to extra function call): Before: test_bpf: torvalds#89 ALU64_ADD_K: 1 + 2 = 3 jited:0 7 PASS test_bpf: torvalds#90 ALU64_ADD_K: 3 + 0 = 3 jited:0 8 PASS test_bpf: torvalds#91 ALU64_ADD_K: 1 + 2147483646 = 2147483647 jited:0 7 PASS test_bpf: torvalds#92 ALU64_ADD_K: 4294967294 + 2 = 4294967296 jited:0 11 PASS test_bpf: torvalds#93 ALU64_ADD_K: 2147483646 + -2147483647 = -1 jited:0 7 PASS After: test_bpf: torvalds#89 ALU64_ADD_K: 1 + 2 = 3 jited:0 11 PASS test_bpf: torvalds#90 ALU64_ADD_K: 3 + 0 = 3 jited:0 11 PASS test_bpf: torvalds#91 ALU64_ADD_K: 1 + 2147483646 = 2147483647 jited:0 11 PASS test_bpf: torvalds#92 ALU64_ADD_K: 4294967294 + 2 = 4294967296 jited:0 14 PASS test_bpf: torvalds#93 ALU64_ADD_K: 2147483646 + -2147483647 = -1 jited:0 10 PASS Longer programs got faster: Before: test_bpf: torvalds#266 BPF_MAXINSNS: Ctx heavy transformations jited:0 20286 20513 PASS test_bpf: torvalds#267 BPF_MAXINSNS: Call heavy transformations jited:0 31853 31768 PASS test_bpf: torvalds#268 BPF_MAXINSNS: Jump heavy test jited:0 9815 PASS test_bpf: torvalds#269 BPF_MAXINSNS: Very long jump backwards jited:0 6 PASS test_bpf: torvalds#270 BPF_MAXINSNS: Edge hopping nuthouse jited:0 13959 PASS test_bpf: torvalds#271 BPF_MAXINSNS: Jump, gap, jump, ... jited:0 210 PASS test_bpf: torvalds#272 BPF_MAXINSNS: ld_abs+get_processor_id jited:0 21724 PASS test_bpf: torvalds#273 BPF_MAXINSNS: ld_abs+vlan_push/pop jited:0 19118 PASS After: test_bpf: torvalds#266 BPF_MAXINSNS: Ctx heavy transformations jited:0 19008 18827 PASS test_bpf: torvalds#267 BPF_MAXINSNS: Call heavy transformations jited:0 29238 28450 PASS test_bpf: torvalds#268 BPF_MAXINSNS: Jump heavy test jited:0 9485 PASS test_bpf: torvalds#269 BPF_MAXINSNS: Very long jump backwards jited:0 12 PASS test_bpf: torvalds#270 BPF_MAXINSNS: Edge hopping nuthouse jited:0 13257 PASS test_bpf: torvalds#271 BPF_MAXINSNS: Jump, gap, jump, ... jited:0 213 PASS test_bpf: torvalds#272 BPF_MAXINSNS: ld_abs+get_processor_id jited:0 19389 PASS test_bpf: torvalds#273 BPF_MAXINSNS: ld_abs+vlan_push/pop jited:0 19583 PASS For real world production programs the difference is noise. This patch is first step towards reducing interpreter stack consumption. Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Daniel Borkmann <[email protected]> Signed-off-by: David S. Miller <[email protected]>

The call to rcu_cpu_starting() in mtrr_ap_init() is not early enough in the CPU-hotplug onlining process, which results in lockdep splats as follows: ============================= WARNING: suspicious RCU usage 5.9.0+ torvalds#268 Not tainted ----------------------------- kernel/kprobes.c:300 RCU-list traversed in non-reader section!! other info that might help us debug this: RCU used illegally from offline CPU! rcu_scheduler_active = 1, debug_locks = 1 no locks held by swapper/1/0. stack backtrace: CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.9.0+ torvalds#268 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: dump_stack+0x77/0x97 __is_insn_slot_addr+0x15d/0x170 kernel_text_address+0xba/0xe0 ? get_stack_info+0x22/0xa0 __kernel_text_address+0x9/0x30 show_trace_log_lvl+0x17d/0x380 ? dump_stack+0x77/0x97 dump_stack+0x77/0x97 __lock_acquire+0xdf7/0x1bf0 lock_acquire+0x258/0x3d0 ? vprintk_emit+0x6d/0x2c0 _raw_spin_lock+0x27/0x40 ? vprintk_emit+0x6d/0x2c0 vprintk_emit+0x6d/0x2c0 printk+0x4d/0x69 start_secondary+0x1c/0x100 secondary_startup_64_no_verify+0xb8/0xbb This is avoided by moving the call to rcu_cpu_starting up near the beginning of the start_secondary() function. Note that the raw_smp_processor_id() is required in order to avoid calling into lockdep before RCU has declared the CPU to be watched for readers. Link: https://lore.kernel.org/lkml/160223032121.7002.1269740091547117869.tip-bot2@tip-bot2/ Reported-by: Qian Cai <[email protected]> Suggested-by: Peter Zijlstra <[email protected]> Signed-off-by: Paul E. McKenney <[email protected]>

This commit fixes the following checkpatch.pl warnings: WARNING: do not add new typedefs #52: FILE: include/rtw_mp.h:52: +typedef struct _MPT_CONTEXT { WARNING: do not add new typedefs torvalds#268: FILE: include/rtw_mp.h:268: +typedef struct _IOCMD_STRUCT_ { Signed-off-by: Marco Cesati <[email protected]>

This commit fixes the following checkpatch.pl warnings: WARNING: do not add new typedefs #52: FILE: include/rtw_mp.h:52: +typedef struct _MPT_CONTEXT { WARNING: do not add new typedefs torvalds#268: FILE: include/rtw_mp.h:268: +typedef struct _IOCMD_STRUCT_ { Signed-off-by: Marco Cesati <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>

In the following scenario: GRO -> SKB_GSO_FRAGLIST aggregation -> forward -> xmit over UDP tunnel -> segmentation __udp_gso_segment_list() will take place and later skb_udp_tunnel_segment() will try to make the segmented packets outer UDP header checksum via gso_make_checksum(). The latter expect valids SKB_GSO_CB(skb)->csum and SKB_GSO_CB(skb)->csum_start, but such fields are not initialized by __udp_gso_segment_list(). gso_make_checksum() will end-up using a negative offset and that will trigger the following splat: ================================================================== BUG: KASAN: slab-out-of-bounds in do_csum+0x3d8/0x400 Read of size 1 at addr ffff888113ab5880 by task napi/br_port-81/1105 CPU: 1 PID: 1105 Comm: napi/br_port-81 Not tainted 5.12.0-rc2.mptcp_autotune_ce84e1323bebe+ torvalds#268 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014 Call Trace: dump_stack+0xfa/0x151 print_address_description.constprop.0+0x16/0xa0 __kasan_report.cold+0x37/0x80 kasan_report+0x3a/0x50 do_csum+0x3d8/0x400 csum_partial+0x21/0x30 __skb_udp_tunnel_segment+0xd79/0x1ae0 skb_udp_tunnel_segment+0x233/0x460 udp4_ufo_fragment+0x50d/0x720 inet_gso_segment+0x525/0x1120 skb_mac_gso_segment+0x278/0x570 __udp_gso_segment_list() already has all the relevant data handy, fix the issue traversing the segments list and updating the GSO CB, if this is a tunnel GSO packet. The issue is present since SKB_GSO_FRAGLIST introduction, but is observable only since commit 18f25dc ("udp: skip L4 aggregation for UDP tunnel packets") Fixes: 18f25dc ("udp: skip L4 aggregation for UDP tunnel packets") Signed-off-by: Paolo Abeni <[email protected]>

rust/error: add helper function to convert a C error pointer to a `Result`

The commit 55d6af1 ("lib/nmi_backtrace: explicitly serialize banner and regs") serialized backtraces from more CPUs using the re-entrant printk_printk_cpu lock. It was a preparation step for removing the obsolete nmi_safe buffers. The single-line messages about idle CPUs were not serialized against other CPUs and might appear in the middle of backtrace from another CPU, for example: [56394.590068] NMI backtrace for cpu 2 [56394.590069] CPU: 2 PID: 444 Comm: systemd-journal Not tainted 5.14.0-rc1-default+ torvalds#268 [56394.590071] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba527-rebuilt.opensuse.org 04/01/2014 [56394.590072] RIP: 0010:lock_is_held_type+0x0/0x120 [56394.590071] NMI backtrace for cpu 0 skipped: idling at native_safe_halt+0xb/0x10 [56394.590076] Code: a2 38 ff 0f 0b 8b 44 24 04 eb bd 48 8d ... [56394.590077] RSP: 0018:ffffab02c07c7e68 EFLAGS: 00000246 [56394.590079] RAX: 0000000000000000 RBX: ffff9a7bc0ec8a40 RCX: ffffffffaab8eb40 It might cause confusion what CPU the following lines belongs to and whether the backtraces are really serialized. Prevent the confusion and serialize also the single line message against other CPUs. Fixes: 55d6af1 ("lib/nmi_backtrace: explicitly serialize banner and regs") Reviewed-by: John Ogness <[email protected]> Reviewed-by: Sergey Senozhatsky <[email protected]> Signed-off-by: Petr Mladek <[email protected]> Link: https://lore.kernel.org/r/[email protected]

The call to rcu_cpu_starting() in mtrr_ap_init() is not early enough in the CPU-hotplug onlining process, which results in lockdep splats as follows: ============================= WARNING: suspicious RCU usage 5.9.0+ torvalds#268 Not tainted ----------------------------- kernel/kprobes.c:300 RCU-list traversed in non-reader section!! other info that might help us debug this: RCU used illegally from offline CPU! rcu_scheduler_active = 1, debug_locks = 1 no locks held by swapper/1/0. stack backtrace: CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.9.0+ torvalds#268 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: dump_stack+0x77/0x97 __is_insn_slot_addr+0x15d/0x170 kernel_text_address+0xba/0xe0 ? get_stack_info+0x22/0xa0 __kernel_text_address+0x9/0x30 show_trace_log_lvl+0x17d/0x380 ? dump_stack+0x77/0x97 dump_stack+0x77/0x97 __lock_acquire+0xdf7/0x1bf0 lock_acquire+0x258/0x3d0 ? vprintk_emit+0x6d/0x2c0 _raw_spin_lock+0x27/0x40 ? vprintk_emit+0x6d/0x2c0 vprintk_emit+0x6d/0x2c0 printk+0x4d/0x69 start_secondary+0x1c/0x100 secondary_startup_64_no_verify+0xb8/0xbb This is avoided by moving the call to rcu_cpu_starting up near the beginning of the start_secondary() function. Note that the raw_smp_processor_id() is required in order to avoid calling into lockdep before RCU has declared the CPU to be watched for readers. Link: https://lore.kernel.org/lkml/160223032121.7002.1269740091547117869.tip-bot2@tip-bot2/ Reported-by: Qian Cai <[email protected]> Suggested-by: Peter Zijlstra <[email protected]> Signed-off-by: Paul E. McKenney <[email protected]>

WARNING: please, no spaces at the start of a line torvalds#249: FILE: mm/page-writeback.c:2089: + {$ ERROR: code indent should use tabs where possible torvalds#250: FILE: mm/page-writeback.c:2090: + .procname = "dirty_background_ratio",$ WARNING: please, no spaces at the start of a line torvalds#250: FILE: mm/page-writeback.c:2090: + .procname = "dirty_background_ratio",$ ERROR: code indent should use tabs where possible torvalds#251: FILE: mm/page-writeback.c:2091: + .data = &dirty_background_ratio,$ WARNING: please, no spaces at the start of a line torvalds#251: FILE: mm/page-writeback.c:2091: + .data = &dirty_background_ratio,$ ERROR: code indent should use tabs where possible torvalds#252: FILE: mm/page-writeback.c:2092: + .maxlen = sizeof(dirty_background_ratio),$ WARNING: please, no spaces at the start of a line torvalds#252: FILE: mm/page-writeback.c:2092: + .maxlen = sizeof(dirty_background_ratio),$ ERROR: code indent should use tabs where possible torvalds#253: FILE: mm/page-writeback.c:2093: + .mode = 0644,$ WARNING: please, no spaces at the start of a line torvalds#253: FILE: mm/page-writeback.c:2093: + .mode = 0644,$ ERROR: code indent should use tabs where possible torvalds#254: FILE: mm/page-writeback.c:2094: + .proc_handler = dirty_background_ratio_handler,$ WARNING: please, no spaces at the start of a line torvalds#254: FILE: mm/page-writeback.c:2094: + .proc_handler = dirty_background_ratio_handler,$ ERROR: code indent should use tabs where possible torvalds#255: FILE: mm/page-writeback.c:2095: + .extra1 = SYSCTL_ZERO,$ WARNING: please, no spaces at the start of a line torvalds#255: FILE: mm/page-writeback.c:2095: + .extra1 = SYSCTL_ZERO,$ ERROR: code indent should use tabs where possible torvalds#256: FILE: mm/page-writeback.c:2096: + .extra2 = SYSCTL_ONE_HUNDRED,$ WARNING: please, no spaces at the start of a line torvalds#256: FILE: mm/page-writeback.c:2096: + .extra2 = SYSCTL_ONE_HUNDRED,$ WARNING: please, no spaces at the start of a line torvalds#257: FILE: mm/page-writeback.c:2097: + },$ WARNING: please, no spaces at the start of a line torvalds#258: FILE: mm/page-writeback.c:2098: + {$ ERROR: code indent should use tabs where possible torvalds#259: FILE: mm/page-writeback.c:2099: + .procname = "dirty_background_bytes",$ WARNING: please, no spaces at the start of a line torvalds#259: FILE: mm/page-writeback.c:2099: + .procname = "dirty_background_bytes",$ ERROR: code indent should use tabs where possible torvalds#260: FILE: mm/page-writeback.c:2100: + .data = &dirty_background_bytes,$ WARNING: please, no spaces at the start of a line torvalds#260: FILE: mm/page-writeback.c:2100: + .data = &dirty_background_bytes,$ ERROR: code indent should use tabs where possible torvalds#261: FILE: mm/page-writeback.c:2101: + .maxlen = sizeof(dirty_background_bytes),$ WARNING: please, no spaces at the start of a line torvalds#261: FILE: mm/page-writeback.c:2101: + .maxlen = sizeof(dirty_background_bytes),$ ERROR: code indent should use tabs where possible torvalds#262: FILE: mm/page-writeback.c:2102: + .mode = 0644,$ WARNING: please, no spaces at the start of a line torvalds#262: FILE: mm/page-writeback.c:2102: + .mode = 0644,$ ERROR: code indent should use tabs where possible torvalds#263: FILE: mm/page-writeback.c:2103: + .proc_handler = dirty_background_bytes_handler,$ WARNING: please, no spaces at the start of a line torvalds#263: FILE: mm/page-writeback.c:2103: + .proc_handler = dirty_background_bytes_handler,$ ERROR: code indent should use tabs where possible torvalds#264: FILE: mm/page-writeback.c:2104: + .extra1 = SYSCTL_LONG_ONE,$ WARNING: please, no spaces at the start of a line torvalds#264: FILE: mm/page-writeback.c:2104: + .extra1 = SYSCTL_LONG_ONE,$ WARNING: please, no spaces at the start of a line torvalds#265: FILE: mm/page-writeback.c:2105: + },$ WARNING: please, no spaces at the start of a line torvalds#266: FILE: mm/page-writeback.c:2106: + {$ ERROR: code indent should use tabs where possible torvalds#267: FILE: mm/page-writeback.c:2107: + .procname = "dirty_ratio",$ WARNING: please, no spaces at the start of a line torvalds#267: FILE: mm/page-writeback.c:2107: + .procname = "dirty_ratio",$ ERROR: code indent should use tabs where possible torvalds#268: FILE: mm/page-writeback.c:2108: + .data = &vm_dirty_ratio,$ WARNING: please, no spaces at the start of a line torvalds#268: FILE: mm/page-writeback.c:2108: + .data = &vm_dirty_ratio,$ ERROR: code indent should use tabs where possible torvalds#269: FILE: mm/page-writeback.c:2109: + .maxlen = sizeof(vm_dirty_ratio),$ WARNING: please, no spaces at the start of a line torvalds#269: FILE: mm/page-writeback.c:2109: + .maxlen = sizeof(vm_dirty_ratio),$ ERROR: code indent should use tabs where possible torvalds#270: FILE: mm/page-writeback.c:2110: + .mode = 0644,$ WARNING: please, no spaces at the start of a line torvalds#270: FILE: mm/page-writeback.c:2110: + .mode = 0644,$ ERROR: code indent should use tabs where possible torvalds#271: FILE: mm/page-writeback.c:2111: + .proc_handler = dirty_ratio_handler,$ WARNING: please, no spaces at the start of a line torvalds#271: FILE: mm/page-writeback.c:2111: + .proc_handler = dirty_ratio_handler,$ ERROR: code indent should use tabs where possible torvalds#272: FILE: mm/page-writeback.c:2112: + .extra1 = SYSCTL_ZERO,$ WARNING: please, no spaces at the start of a line torvalds#272: FILE: mm/page-writeback.c:2112: + .extra1 = SYSCTL_ZERO,$ ERROR: code indent should use tabs where possible torvalds#273: FILE: mm/page-writeback.c:2113: + .extra2 = SYSCTL_ONE_HUNDRED,$ WARNING: please, no spaces at the start of a line torvalds#273: FILE: mm/page-writeback.c:2113: + .extra2 = SYSCTL_ONE_HUNDRED,$ WARNING: please, no spaces at the start of a line torvalds#274: FILE: mm/page-writeback.c:2114: + },$ WARNING: please, no spaces at the start of a line torvalds#275: FILE: mm/page-writeback.c:2115: + {$ ERROR: code indent should use tabs where possible torvalds#276: FILE: mm/page-writeback.c:2116: + .procname = "dirty_bytes",$ WARNING: please, no spaces at the start of a line torvalds#276: FILE: mm/page-writeback.c:2116: + .procname = "dirty_bytes",$ ERROR: code indent should use tabs where possible torvalds#277: FILE: mm/page-writeback.c:2117: + .data = &vm_dirty_bytes,$ WARNING: please, no spaces at the start of a line torvalds#277: FILE: mm/page-writeback.c:2117: + .data = &vm_dirty_bytes,$ ERROR: code indent should use tabs where possible torvalds#278: FILE: mm/page-writeback.c:2118: + .maxlen = sizeof(vm_dirty_bytes),$ WARNING: please, no spaces at the start of a line torvalds#278: FILE: mm/page-writeback.c:2118: + .maxlen = sizeof(vm_dirty_bytes),$ ERROR: code indent should use tabs where possible torvalds#279: FILE: mm/page-writeback.c:2119: + .mode = 0644,$ WARNING: please, no spaces at the start of a line torvalds#279: FILE: mm/page-writeback.c:2119: + .mode = 0644,$ ERROR: code indent should use tabs where possible torvalds#280: FILE: mm/page-writeback.c:2120: + .proc_handler = dirty_bytes_handler,$ WARNING: please, no spaces at the start of a line torvalds#280: FILE: mm/page-writeback.c:2120: + .proc_handler = dirty_bytes_handler,$ ERROR: code indent should use tabs where possible torvalds#281: FILE: mm/page-writeback.c:2121: + .extra1 = (void *)&dirty_bytes_min,$ WARNING: please, no spaces at the start of a line torvalds#281: FILE: mm/page-writeback.c:2121: + .extra1 = (void *)&dirty_bytes_min,$ WARNING: please, no spaces at the start of a line torvalds#282: FILE: mm/page-writeback.c:2122: + },$ WARNING: please, no spaces at the start of a line torvalds#283: FILE: mm/page-writeback.c:2123: + {$ ERROR: code indent should use tabs where possible torvalds#284: FILE: mm/page-writeback.c:2124: + .procname = "dirty_writeback_centisecs",$ WARNING: please, no spaces at the start of a line torvalds#284: FILE: mm/page-writeback.c:2124: + .procname = "dirty_writeback_centisecs",$ ERROR: code indent should use tabs where possible torvalds#285: FILE: mm/page-writeback.c:2125: + .data = &dirty_writeback_interval,$ WARNING: please, no spaces at the start of a line torvalds#285: FILE: mm/page-writeback.c:2125: + .data = &dirty_writeback_interval,$ ERROR: code indent should use tabs where possible torvalds#286: FILE: mm/page-writeback.c:2126: + .maxlen = sizeof(dirty_writeback_interval),$ WARNING: please, no spaces at the start of a line torvalds#286: FILE: mm/page-writeback.c:2126: + .maxlen = sizeof(dirty_writeback_interval),$ ERROR: code indent should use tabs where possible torvalds#287: FILE: mm/page-writeback.c:2127: + .mode = 0644,$ WARNING: please, no spaces at the start of a line torvalds#287: FILE: mm/page-writeback.c:2127: + .mode = 0644,$ ERROR: code indent should use tabs where possible torvalds#288: FILE: mm/page-writeback.c:2128: + .proc_handler = dirty_writeback_centisecs_handler,$ WARNING: please, no spaces at the start of a line torvalds#288: FILE: mm/page-writeback.c:2128: + .proc_handler = dirty_writeback_centisecs_handler,$ WARNING: please, no spaces at the start of a line torvalds#289: FILE: mm/page-writeback.c:2129: + },$ WARNING: please, no spaces at the start of a line torvalds#290: FILE: mm/page-writeback.c:2130: + {$ ERROR: code indent should use tabs where possible torvalds#291: FILE: mm/page-writeback.c:2131: + .procname = "dirty_expire_centisecs",$ WARNING: please, no spaces at the start of a line torvalds#291: FILE: mm/page-writeback.c:2131: + .procname = "dirty_expire_centisecs",$ ERROR: code indent should use tabs where possible torvalds#292: FILE: mm/page-writeback.c:2132: + .data = &dirty_expire_interval,$ WARNING: please, no spaces at the start of a line torvalds#292: FILE: mm/page-writeback.c:2132: + .data = &dirty_expire_interval,$ ERROR: code indent should use tabs where possible torvalds#293: FILE: mm/page-writeback.c:2133: + .maxlen = sizeof(dirty_expire_interval),$ WARNING: please, no spaces at the start of a line torvalds#293: FILE: mm/page-writeback.c:2133: + .maxlen = sizeof(dirty_expire_interval),$ ERROR: code indent should use tabs where possible torvalds#294: FILE: mm/page-writeback.c:2134: + .mode = 0644,$ WARNING: please, no spaces at the start of a line torvalds#294: FILE: mm/page-writeback.c:2134: + .mode = 0644,$ ERROR: code indent should use tabs where possible torvalds#295: FILE: mm/page-writeback.c:2135: + .proc_handler = proc_dointvec_minmax,$ WARNING: please, no spaces at the start of a line torvalds#295: FILE: mm/page-writeback.c:2135: + .proc_handler = proc_dointvec_minmax,$ ERROR: code indent should use tabs where possible torvalds#296: FILE: mm/page-writeback.c:2136: + .extra1 = SYSCTL_ZERO,$ WARNING: please, no spaces at the start of a line torvalds#296: FILE: mm/page-writeback.c:2136: + .extra1 = SYSCTL_ZERO,$ WARNING: please, no spaces at the start of a line torvalds#297: FILE: mm/page-writeback.c:2137: + },$ total: 37 errors, 49 warnings, 287 lines checked NOTE: For some of the reported defects, checkpatch may be able to mechanically convert to the typical style using --fix or --fix-inplace. NOTE: Whitespace errors detected. You may wish to use scripts/cleanpatch or scripts/cleanfile ./patches/mm-move-page-writeback-sysctls-to-is-own-file.patch has style problems, please review. NOTE: If any of the errors are false positives, please report them to the maintainer, see CHECKPATCH in MAINTAINERS. Please run checkpatch prior to sending patches Cc: Iurii Zaikin <[email protected]> Cc: Kees Cook <[email protected]> Cc: Luis Chamberlain <[email protected]> Cc: zhanglianjie <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Stephen Rothwell <[email protected]>

WARNING: please, no spaces at the start of a line torvalds#249: FILE: mm/page-writeback.c:2089: + {$ ERROR: code indent should use tabs where possible torvalds#250: FILE: mm/page-writeback.c:2090: + .procname = "dirty_background_ratio",$ WARNING: please, no spaces at the start of a line torvalds#250: FILE: mm/page-writeback.c:2090: + .procname = "dirty_background_ratio",$ ERROR: code indent should use tabs where possible torvalds#251: FILE: mm/page-writeback.c:2091: + .data = &dirty_background_ratio,$ WARNING: please, no spaces at the start of a line torvalds#251: FILE: mm/page-writeback.c:2091: + .data = &dirty_background_ratio,$ ERROR: code indent should use tabs where possible torvalds#252: FILE: mm/page-writeback.c:2092: + .maxlen = sizeof(dirty_background_ratio),$ WARNING: please, no spaces at the start of a line torvalds#252: FILE: mm/page-writeback.c:2092: + .maxlen = sizeof(dirty_background_ratio),$ ERROR: code indent should use tabs where possible torvalds#253: FILE: mm/page-writeback.c:2093: + .mode = 0644,$ WARNING: please, no spaces at the start of a line torvalds#253: FILE: mm/page-writeback.c:2093: + .mode = 0644,$ ERROR: code indent should use tabs where possible torvalds#254: FILE: mm/page-writeback.c:2094: + .proc_handler = dirty_background_ratio_handler,$ WARNING: please, no spaces at the start of a line torvalds#254: FILE: mm/page-writeback.c:2094: + .proc_handler = dirty_background_ratio_handler,$ ERROR: code indent should use tabs where possible torvalds#255: FILE: mm/page-writeback.c:2095: + .extra1 = SYSCTL_ZERO,$ WARNING: please, no spaces at the start of a line torvalds#255: FILE: mm/page-writeback.c:2095: + .extra1 = SYSCTL_ZERO,$ ERROR: code indent should use tabs where possible torvalds#256: FILE: mm/page-writeback.c:2096: + .extra2 = SYSCTL_ONE_HUNDRED,$ WARNING: please, no spaces at the start of a line torvalds#256: FILE: mm/page-writeback.c:2096: + .extra2 = SYSCTL_ONE_HUNDRED,$ WARNING: please, no spaces at the start of a line torvalds#257: FILE: mm/page-writeback.c:2097: + },$ WARNING: please, no spaces at the start of a line torvalds#258: FILE: mm/page-writeback.c:2098: + {$ ERROR: code indent should use tabs where possible torvalds#259: FILE: mm/page-writeback.c:2099: + .procname = "dirty_background_bytes",$ WARNING: please, no spaces at the start of a line torvalds#259: FILE: mm/page-writeback.c:2099: + .procname = "dirty_background_bytes",$ ERROR: code indent should use tabs where possible torvalds#260: FILE: mm/page-writeback.c:2100: + .data = &dirty_background_bytes,$ WARNING: please, no spaces at the start of a line torvalds#260: FILE: mm/page-writeback.c:2100: + .data = &dirty_background_bytes,$ ERROR: code indent should use tabs where possible torvalds#261: FILE: mm/page-writeback.c:2101: + .maxlen = sizeof(dirty_background_bytes),$ WARNING: please, no spaces at the start of a line torvalds#261: FILE: mm/page-writeback.c:2101: + .maxlen = sizeof(dirty_background_bytes),$ ERROR: code indent should use tabs where possible torvalds#262: FILE: mm/page-writeback.c:2102: + .mode = 0644,$ WARNING: please, no spaces at the start of a line torvalds#262: FILE: mm/page-writeback.c:2102: + .mode = 0644,$ ERROR: code indent should use tabs where possible torvalds#263: FILE: mm/page-writeback.c:2103: + .proc_handler = dirty_background_bytes_handler,$ WARNING: please, no spaces at the start of a line torvalds#263: FILE: mm/page-writeback.c:2103: + .proc_handler = dirty_background_bytes_handler,$ ERROR: code indent should use tabs where possible torvalds#264: FILE: mm/page-writeback.c:2104: + .extra1 = SYSCTL_LONG_ONE,$ WARNING: please, no spaces at the start of a line torvalds#264: FILE: mm/page-writeback.c:2104: + .extra1 = SYSCTL_LONG_ONE,$ WARNING: please, no spaces at the start of a line torvalds#265: FILE: mm/page-writeback.c:2105: + },$ WARNING: please, no spaces at the start of a line torvalds#266: FILE: mm/page-writeback.c:2106: + {$ ERROR: code indent should use tabs where possible torvalds#267: FILE: mm/page-writeback.c:2107: + .procname = "dirty_ratio",$ WARNING: please, no spaces at the start of a line torvalds#267: FILE: mm/page-writeback.c:2107: + .procname = "dirty_ratio",$ ERROR: code indent should use tabs where possible torvalds#268: FILE: mm/page-writeback.c:2108: + .data = &vm_dirty_ratio,$ WARNING: please, no spaces at the start of a line torvalds#268: FILE: mm/page-writeback.c:2108: + .data = &vm_dirty_ratio,$ ERROR: code indent should use tabs where possible torvalds#269: FILE: mm/page-writeback.c:2109: + .maxlen = sizeof(vm_dirty_ratio),$ WARNING: please, no spaces at the start of a line torvalds#269: FILE: mm/page-writeback.c:2109: + .maxlen = sizeof(vm_dirty_ratio),$ ERROR: code indent should use tabs where possible torvalds#270: FILE: mm/page-writeback.c:2110: + .mode = 0644,$ WARNING: please, no spaces at the start of a line torvalds#270: FILE: mm/page-writeback.c:2110: + .mode = 0644,$ ERROR: code indent should use tabs where possible torvalds#271: FILE: mm/page-writeback.c:2111: + .proc_handler = dirty_ratio_handler,$ WARNING: please, no spaces at the start of a line torvalds#271: FILE: mm/page-writeback.c:2111: + .proc_handler = dirty_ratio_handler,$ ERROR: code indent should use tabs where possible torvalds#272: FILE: mm/page-writeback.c:2112: + .extra1 = SYSCTL_ZERO,$ WARNING: please, no spaces at the start of a line torvalds#272: FILE: mm/page-writeback.c:2112: + .extra1 = SYSCTL_ZERO,$ ERROR: code indent should use tabs where possible torvalds#273: FILE: mm/page-writeback.c:2113: + .extra2 = SYSCTL_ONE_HUNDRED,$ WARNING: please, no spaces at the start of a line torvalds#273: FILE: mm/page-writeback.c:2113: + .extra2 = SYSCTL_ONE_HUNDRED,$ WARNING: please, no spaces at the start of a line torvalds#274: FILE: mm/page-writeback.c:2114: + },$ WARNING: please, no spaces at the start of a line torvalds#275: FILE: mm/page-writeback.c:2115: + {$ ERROR: code indent should use tabs where possible torvalds#276: FILE: mm/page-writeback.c:2116: + .procname = "dirty_bytes",$ WARNING: please, no spaces at the start of a line torvalds#276: FILE: mm/page-writeback.c:2116: + .procname = "dirty_bytes",$ ERROR: code indent should use tabs where possible torvalds#277: FILE: mm/page-writeback.c:2117: + .data = &vm_dirty_bytes,$ WARNING: please, no spaces at the start of a line torvalds#277: FILE: mm/page-writeback.c:2117: + .data = &vm_dirty_bytes,$ ERROR: code indent should use tabs where possible torvalds#278: FILE: mm/page-writeback.c:2118: + .maxlen = sizeof(vm_dirty_bytes),$ WARNING: please, no spaces at the start of a line torvalds#278: FILE: mm/page-writeback.c:2118: + .maxlen = sizeof(vm_dirty_bytes),$ ERROR: code indent should use tabs where possible torvalds#279: FILE: mm/page-writeback.c:2119: + .mode = 0644,$ WARNING: please, no spaces at the start of a line torvalds#279: FILE: mm/page-writeback.c:2119: + .mode = 0644,$ ERROR: code indent should use tabs where possible torvalds#280: FILE: mm/page-writeback.c:2120: + .proc_handler = dirty_bytes_handler,$ WARNING: please, no spaces at the start of a line torvalds#280: FILE: mm/page-writeback.c:2120: + .proc_handler = dirty_bytes_handler,$ ERROR: code indent should use tabs where possible torvalds#281: FILE: mm/page-writeback.c:2121: + .extra1 = (void *)&dirty_bytes_min,$ WARNING: please, no spaces at the start of a line torvalds#281: FILE: mm/page-writeback.c:2121: + .extra1 = (void *)&dirty_bytes_min,$ WARNING: please, no spaces at the start of a line torvalds#282: FILE: mm/page-writeback.c:2122: + },$ WARNING: please, no spaces at the start of a line torvalds#283: FILE: mm/page-writeback.c:2123: + {$ ERROR: code indent should use tabs where possible torvalds#284: FILE: mm/page-writeback.c:2124: + .procname = "dirty_writeback_centisecs",$ WARNING: please, no spaces at the start of a line torvalds#284: FILE: mm/page-writeback.c:2124: + .procname = "dirty_writeback_centisecs",$ ERROR: code indent should use tabs where possible torvalds#285: FILE: mm/page-writeback.c:2125: + .data = &dirty_writeback_interval,$ WARNING: please, no spaces at the start of a line torvalds#285: FILE: mm/page-writeback.c:2125: + .data = &dirty_writeback_interval,$ ERROR: code indent should use tabs where possible torvalds#286: FILE: mm/page-writeback.c:2126: + .maxlen = sizeof(dirty_writeback_interval),$ WARNING: please, no spaces at the start of a line torvalds#286: FILE: mm/page-writeback.c:2126: + .maxlen = sizeof(dirty_writeback_interval),$ ERROR: code indent should use tabs where possible torvalds#287: FILE: mm/page-writeback.c:2127: + .mode = 0644,$ WARNING: please, no spaces at the start of a line torvalds#287: FILE: mm/page-writeback.c:2127: + .mode = 0644,$ ERROR: code indent should use tabs where possible torvalds#288: FILE: mm/page-writeback.c:2128: + .proc_handler = dirty_writeback_centisecs_handler,$ WARNING: please, no spaces at the start of a line torvalds#288: FILE: mm/page-writeback.c:2128: + .proc_handler = dirty_writeback_centisecs_handler,$ WARNING: please, no spaces at the start of a line torvalds#289: FILE: mm/page-writeback.c:2129: + },$ WARNING: please, no spaces at the start of a line torvalds#290: FILE: mm/page-writeback.c:2130: + {$ ERROR: code indent should use tabs where possible torvalds#291: FILE: mm/page-writeback.c:2131: + .procname = "dirty_expire_centisecs",$ WARNING: please, no spaces at the start of a line torvalds#291: FILE: mm/page-writeback.c:2131: + .procname = "dirty_expire_centisecs",$ ERROR: code indent should use tabs where possible torvalds#292: FILE: mm/page-writeback.c:2132: + .data = &dirty_expire_interval,$ WARNING: please, no spaces at the start of a line torvalds#292: FILE: mm/page-writeback.c:2132: + .data = &dirty_expire_interval,$ ERROR: code indent should use tabs where possible torvalds#293: FILE: mm/page-writeback.c:2133: + .maxlen = sizeof(dirty_expire_interval),$ WARNING: please, no spaces at the start of a line torvalds#293: FILE: mm/page-writeback.c:2133: + .maxlen = sizeof(dirty_expire_interval),$ ERROR: code indent should use tabs where possible torvalds#294: FILE: mm/page-writeback.c:2134: + .mode = 0644,$ WARNING: please, no spaces at the start of a line torvalds#294: FILE: mm/page-writeback.c:2134: + .mode = 0644,$ ERROR: code indent should use tabs where possible torvalds#295: FILE: mm/page-writeback.c:2135: + .proc_handler = proc_dointvec_minmax,$ WARNING: please, no spaces at the start of a line torvalds#295: FILE: mm/page-writeback.c:2135: + .proc_handler = proc_dointvec_minmax,$ ERROR: code indent should use tabs where possible torvalds#296: FILE: mm/page-writeback.c:2136: + .extra1 = SYSCTL_ZERO,$ WARNING: please, no spaces at the start of a line torvalds#296: FILE: mm/page-writeback.c:2136: + .extra1 = SYSCTL_ZERO,$ WARNING: please, no spaces at the start of a line torvalds#297: FILE: mm/page-writeback.c:2137: + },$ total: 37 errors, 49 warnings, 287 lines checked NOTE: For some of the reported defects, checkpatch may be able to mechanically convert to the typical style using --fix or --fix-inplace. NOTE: Whitespace errors detected. You may wish to use scripts/cleanpatch or scripts/cleanfile ./patches/mm-move-page-writeback-sysctls-to-is-own-file.patch has style problems, please review. NOTE: If any of the errors are false positives, please report them to the maintainer, see CHECKPATCH in MAINTAINERS. Please run checkpatch prior to sending patches Cc: Iurii Zaikin <[email protected]> Cc: Kees Cook <[email protected]> Cc: Luis Chamberlain <[email protected]> Cc: zhanglianjie <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Mark Brown <[email protected]>

commit 29368e0 upstream. The call to rcu_cpu_starting() in mtrr_ap_init() is not early enough in the CPU-hotplug onlining process, which results in lockdep splats as follows: ============================= WARNING: suspicious RCU usage 5.9.0+ torvalds#268 Not tainted ----------------------------- kernel/kprobes.c:300 RCU-list traversed in non-reader section!! other info that might help us debug this: RCU used illegally from offline CPU! rcu_scheduler_active = 1, debug_locks = 1 no locks held by swapper/1/0. stack backtrace: CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.9.0+ torvalds#268 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: dump_stack+0x77/0x97 __is_insn_slot_addr+0x15d/0x170 kernel_text_address+0xba/0xe0 ? get_stack_info+0x22/0xa0 __kernel_text_address+0x9/0x30 show_trace_log_lvl+0x17d/0x380 ? dump_stack+0x77/0x97 dump_stack+0x77/0x97 __lock_acquire+0xdf7/0x1bf0 lock_acquire+0x258/0x3d0 ? vprintk_emit+0x6d/0x2c0 _raw_spin_lock+0x27/0x40 ? vprintk_emit+0x6d/0x2c0 vprintk_emit+0x6d/0x2c0 printk+0x4d/0x69 start_secondary+0x1c/0x100 secondary_startup_64_no_verify+0xb8/0xbb This is avoided by moving the call to rcu_cpu_starting up near the beginning of the start_secondary() function. Note that the raw_smp_processor_id() is required in order to avoid calling into lockdep before RCU has declared the CPU to be watched for readers. Link: https://lore.kernel.org/lkml/160223032121.7002.1269740091547117869.tip-bot2@tip-bot2/ Reported-by: Qian Cai <[email protected]> Suggested-by: Peter Zijlstra <[email protected]> Signed-off-by: Paul E. McKenney <[email protected]> Cc: Joel Fernandes <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

Add a new test case to query on an empty bpf_mprog and pass the revision directly into expected_revision for attachment to assert that this does succeed. ./test_progs -t tc_opts [ 1.406778] tsc: Refined TSC clocksource calibration: 3407.990 MHz [ 1.408863] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x311fcaf6eb0, max_idle_ns: 440795321766 ns [ 1.412419] clocksource: Switched to clocksource tsc [ 1.428671] bpf_testmod: loading out-of-tree module taints kernel. [ 1.430260] bpf_testmod: module verification failed: signature and/or required key missing - tainting kernel torvalds#252 tc_opts_after:OK torvalds#253 tc_opts_append:OK torvalds#254 tc_opts_basic:OK torvalds#255 tc_opts_before:OK torvalds#256 tc_opts_chain_classic:OK torvalds#257 tc_opts_chain_mixed:OK torvalds#258 tc_opts_delete_empty:OK torvalds#259 tc_opts_demixed:OK torvalds#260 tc_opts_detach:OK torvalds#261 tc_opts_detach_after:OK torvalds#262 tc_opts_detach_before:OK torvalds#263 tc_opts_dev_cleanup:OK torvalds#264 tc_opts_invalid:OK torvalds#265 tc_opts_max:OK torvalds#266 tc_opts_mixed:OK torvalds#267 tc_opts_prepend:OK torvalds#268 tc_opts_query:OK torvalds#269 tc_opts_query_attach:OK <--- (new test) torvalds#270 tc_opts_replace:OK torvalds#271 tc_opts_revision:OK Summary: 20/0 PASSED, 0 SKIPPED, 0 FAILED Signed-off-by: Daniel Borkmann <[email protected]>

Add a new test case which performs double query of the bpf_mprog through libbpf API, but also via raw bpf(2) syscall. This is testing to gather first the count and then in a subsequent probe the full information with the program array without clearing passed structs in between. # ./vmtest.sh -- ./test_progs -t tc_opts [...] ./test_progs -t tc_opts [ 1.398818] tsc: Refined TSC clocksource calibration: 3407.999 MHz [ 1.400263] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x311fd336761, max_idle_ns: 440795243819 ns [ 1.402734] clocksource: Switched to clocksource tsc [ 1.426639] bpf_testmod: loading out-of-tree module taints kernel. [ 1.428112] bpf_testmod: module verification failed: signature and/or required key missing - tainting kernel torvalds#252 tc_opts_after:OK torvalds#253 tc_opts_append:OK torvalds#254 tc_opts_basic:OK torvalds#255 tc_opts_before:OK torvalds#256 tc_opts_chain_classic:OK torvalds#257 tc_opts_chain_mixed:OK torvalds#258 tc_opts_delete_empty:OK torvalds#259 tc_opts_demixed:OK torvalds#260 tc_opts_detach:OK torvalds#261 tc_opts_detach_after:OK torvalds#262 tc_opts_detach_before:OK torvalds#263 tc_opts_dev_cleanup:OK torvalds#264 tc_opts_invalid:OK torvalds#265 tc_opts_max:OK torvalds#266 tc_opts_mixed:OK torvalds#267 tc_opts_prepend:OK torvalds#268 tc_opts_query:OK <--- (new test) torvalds#269 tc_opts_replace:OK torvalds#270 tc_opts_revision:OK Summary: 19/0 PASSED, 0 SKIPPED, 0 FAILED Signed-off-by: Daniel Borkmann <[email protected]>

Add a new test case to query on an empty bpf_mprog and pass the revision directly into expected_revision for attachment to assert that this does succeed. ./test_progs -t tc_opts [ 1.406778] tsc: Refined TSC clocksource calibration: 3407.990 MHz [ 1.408863] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x311fcaf6eb0, max_idle_ns: 440795321766 ns [ 1.412419] clocksource: Switched to clocksource tsc [ 1.428671] bpf_testmod: loading out-of-tree module taints kernel. [ 1.430260] bpf_testmod: module verification failed: signature and/or required key missing - tainting kernel torvalds#252 tc_opts_after:OK torvalds#253 tc_opts_append:OK torvalds#254 tc_opts_basic:OK torvalds#255 tc_opts_before:OK torvalds#256 tc_opts_chain_classic:OK torvalds#257 tc_opts_chain_mixed:OK torvalds#258 tc_opts_delete_empty:OK torvalds#259 tc_opts_demixed:OK torvalds#260 tc_opts_detach:OK torvalds#261 tc_opts_detach_after:OK torvalds#262 tc_opts_detach_before:OK torvalds#263 tc_opts_dev_cleanup:OK torvalds#264 tc_opts_invalid:OK torvalds#265 tc_opts_max:OK torvalds#266 tc_opts_mixed:OK torvalds#267 tc_opts_prepend:OK torvalds#268 tc_opts_query:OK torvalds#269 tc_opts_query_attach:OK <--- (new test) torvalds#270 tc_opts_replace:OK torvalds#271 tc_opts_revision:OK Summary: 20/0 PASSED, 0 SKIPPED, 0 FAILED Signed-off-by: Daniel Borkmann <[email protected]>

Add a new test case which performs double query of the bpf_mprog through libbpf API, but also via raw bpf(2) syscall. This is testing to gather first the count and then in a subsequent probe the full information with the program array without clearing passed structs in between. # ./vmtest.sh -- ./test_progs -t tc_opts [...] ./test_progs -t tc_opts [ 1.398818] tsc: Refined TSC clocksource calibration: 3407.999 MHz [ 1.400263] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x311fd336761, max_idle_ns: 440795243819 ns [ 1.402734] clocksource: Switched to clocksource tsc [ 1.426639] bpf_testmod: loading out-of-tree module taints kernel. [ 1.428112] bpf_testmod: module verification failed: signature and/or required key missing - tainting kernel torvalds#252 tc_opts_after:OK torvalds#253 tc_opts_append:OK torvalds#254 tc_opts_basic:OK torvalds#255 tc_opts_before:OK torvalds#256 tc_opts_chain_classic:OK torvalds#257 tc_opts_chain_mixed:OK torvalds#258 tc_opts_delete_empty:OK torvalds#259 tc_opts_demixed:OK torvalds#260 tc_opts_detach:OK torvalds#261 tc_opts_detach_after:OK torvalds#262 tc_opts_detach_before:OK torvalds#263 tc_opts_dev_cleanup:OK torvalds#264 tc_opts_invalid:OK torvalds#265 tc_opts_max:OK torvalds#266 tc_opts_mixed:OK torvalds#267 tc_opts_prepend:OK torvalds#268 tc_opts_query:OK <--- (new test) torvalds#269 tc_opts_replace:OK torvalds#270 tc_opts_revision:OK Summary: 19/0 PASSED, 0 SKIPPED, 0 FAILED Signed-off-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Martin KaFai Lau <[email protected]>

Add a new test case to query on an empty bpf_mprog and pass the revision directly into expected_revision for attachment to assert that this does succeed. ./test_progs -t tc_opts [ 1.406778] tsc: Refined TSC clocksource calibration: 3407.990 MHz [ 1.408863] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x311fcaf6eb0, max_idle_ns: 440795321766 ns [ 1.412419] clocksource: Switched to clocksource tsc [ 1.428671] bpf_testmod: loading out-of-tree module taints kernel. [ 1.430260] bpf_testmod: module verification failed: signature and/or required key missing - tainting kernel torvalds#252 tc_opts_after:OK torvalds#253 tc_opts_append:OK torvalds#254 tc_opts_basic:OK torvalds#255 tc_opts_before:OK torvalds#256 tc_opts_chain_classic:OK torvalds#257 tc_opts_chain_mixed:OK torvalds#258 tc_opts_delete_empty:OK torvalds#259 tc_opts_demixed:OK torvalds#260 tc_opts_detach:OK torvalds#261 tc_opts_detach_after:OK torvalds#262 tc_opts_detach_before:OK torvalds#263 tc_opts_dev_cleanup:OK torvalds#264 tc_opts_invalid:OK torvalds#265 tc_opts_max:OK torvalds#266 tc_opts_mixed:OK torvalds#267 tc_opts_prepend:OK torvalds#268 tc_opts_query:OK torvalds#269 tc_opts_query_attach:OK <--- (new test) torvalds#270 tc_opts_replace:OK torvalds#271 tc_opts_revision:OK Summary: 20/0 PASSED, 0 SKIPPED, 0 FAILED Signed-off-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Martin KaFai Lau <[email protected]>

Add several new test cases which assert corner cases on the mprog query mechanism, for example, around passing in a too small or a larger array than the current count. ./test_progs -t tc_opts torvalds#252 tc_opts_after:OK torvalds#253 tc_opts_append:OK torvalds#254 tc_opts_basic:OK torvalds#255 tc_opts_before:OK torvalds#256 tc_opts_chain_classic:OK torvalds#257 tc_opts_chain_mixed:OK torvalds#258 tc_opts_delete_empty:OK torvalds#259 tc_opts_demixed:OK torvalds#260 tc_opts_detach:OK torvalds#261 tc_opts_detach_after:OK torvalds#262 tc_opts_detach_before:OK torvalds#263 tc_opts_dev_cleanup:OK torvalds#264 tc_opts_invalid:OK torvalds#265 tc_opts_max:OK torvalds#266 tc_opts_mixed:OK torvalds#267 tc_opts_prepend:OK torvalds#268 tc_opts_query:OK torvalds#269 tc_opts_query_attach:OK torvalds#270 tc_opts_replace:OK torvalds#271 tc_opts_revision:OK Summary: 20/0 PASSED, 0 SKIPPED, 0 FAILED Signed-off-by: Daniel Borkmann <[email protected]>

Add a new test case which performs double query of the bpf_mprog through libbpf API, but also via raw bpf(2) syscall. This is testing to gather first the count and then in a subsequent probe the full information with the program array without clearing passed structs in between. # ./vmtest.sh -- ./test_progs -t tc_opts [...] ./test_progs -t tc_opts [ 1.398818] tsc: Refined TSC clocksource calibration: 3407.999 MHz [ 1.400263] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x311fd336761, max_idle_ns: 440795243819 ns [ 1.402734] clocksource: Switched to clocksource tsc [ 1.426639] bpf_testmod: loading out-of-tree module taints kernel. [ 1.428112] bpf_testmod: module verification failed: signature and/or required key missing - tainting kernel torvalds#252 tc_opts_after:OK torvalds#253 tc_opts_append:OK torvalds#254 tc_opts_basic:OK torvalds#255 tc_opts_before:OK torvalds#256 tc_opts_chain_classic:OK torvalds#257 tc_opts_chain_mixed:OK torvalds#258 tc_opts_delete_empty:OK torvalds#259 tc_opts_demixed:OK torvalds#260 tc_opts_detach:OK torvalds#261 tc_opts_detach_after:OK torvalds#262 tc_opts_detach_before:OK torvalds#263 tc_opts_dev_cleanup:OK torvalds#264 tc_opts_invalid:OK torvalds#265 tc_opts_max:OK torvalds#266 tc_opts_mixed:OK torvalds#267 tc_opts_prepend:OK torvalds#268 tc_opts_query:OK <--- (new test) torvalds#269 tc_opts_replace:OK torvalds#270 tc_opts_revision:OK Summary: 19/0 PASSED, 0 SKIPPED, 0 FAILED Signed-off-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Martin KaFai Lau <[email protected]>

Add a new test case to query on an empty bpf_mprog and pass the revision directly into expected_revision for attachment to assert that this does succeed. ./test_progs -t tc_opts [ 1.406778] tsc: Refined TSC clocksource calibration: 3407.990 MHz [ 1.408863] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x311fcaf6eb0, max_idle_ns: 440795321766 ns [ 1.412419] clocksource: Switched to clocksource tsc [ 1.428671] bpf_testmod: loading out-of-tree module taints kernel. [ 1.430260] bpf_testmod: module verification failed: signature and/or required key missing - tainting kernel torvalds#252 tc_opts_after:OK torvalds#253 tc_opts_append:OK torvalds#254 tc_opts_basic:OK torvalds#255 tc_opts_before:OK torvalds#256 tc_opts_chain_classic:OK torvalds#257 tc_opts_chain_mixed:OK torvalds#258 tc_opts_delete_empty:OK torvalds#259 tc_opts_demixed:OK torvalds#260 tc_opts_detach:OK torvalds#261 tc_opts_detach_after:OK torvalds#262 tc_opts_detach_before:OK torvalds#263 tc_opts_dev_cleanup:OK torvalds#264 tc_opts_invalid:OK torvalds#265 tc_opts_max:OK torvalds#266 tc_opts_mixed:OK torvalds#267 tc_opts_prepend:OK torvalds#268 tc_opts_query:OK torvalds#269 tc_opts_query_attach:OK <--- (new test) torvalds#270 tc_opts_replace:OK torvalds#271 tc_opts_revision:OK Summary: 20/0 PASSED, 0 SKIPPED, 0 FAILED Signed-off-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Martin KaFai Lau <[email protected]>

Add several new test cases which assert corner cases on the mprog query mechanism, for example, around passing in a too small or a larger array than the current count. ./test_progs -t tc_opts torvalds#252 tc_opts_after:OK torvalds#253 tc_opts_append:OK torvalds#254 tc_opts_basic:OK torvalds#255 tc_opts_before:OK torvalds#256 tc_opts_chain_classic:OK torvalds#257 tc_opts_chain_mixed:OK torvalds#258 tc_opts_delete_empty:OK torvalds#259 tc_opts_demixed:OK torvalds#260 tc_opts_detach:OK torvalds#261 tc_opts_detach_after:OK torvalds#262 tc_opts_detach_before:OK torvalds#263 tc_opts_dev_cleanup:OK torvalds#264 tc_opts_invalid:OK torvalds#265 tc_opts_max:OK torvalds#266 tc_opts_mixed:OK torvalds#267 tc_opts_prepend:OK torvalds#268 tc_opts_query:OK torvalds#269 tc_opts_query_attach:OK torvalds#270 tc_opts_replace:OK torvalds#271 tc_opts_revision:OK Summary: 20/0 PASSED, 0 SKIPPED, 0 FAILED Signed-off-by: Daniel Borkmann <[email protected]>

Add several new test cases which assert corner cases on the mprog query mechanism, for example, around passing in a too small or a larger array than the current count. ./test_progs -t tc_opts torvalds#252 tc_opts_after:OK torvalds#253 tc_opts_append:OK torvalds#254 tc_opts_basic:OK torvalds#255 tc_opts_before:OK torvalds#256 tc_opts_chain_classic:OK torvalds#257 tc_opts_chain_mixed:OK torvalds#258 tc_opts_delete_empty:OK torvalds#259 tc_opts_demixed:OK torvalds#260 tc_opts_detach:OK torvalds#261 tc_opts_detach_after:OK torvalds#262 tc_opts_detach_before:OK torvalds#263 tc_opts_dev_cleanup:OK torvalds#264 tc_opts_invalid:OK torvalds#265 tc_opts_max:OK torvalds#266 tc_opts_mixed:OK torvalds#267 tc_opts_prepend:OK torvalds#268 tc_opts_query:OK torvalds#269 tc_opts_query_attach:OK torvalds#270 tc_opts_replace:OK torvalds#271 tc_opts_revision:OK Summary: 20/0 PASSED, 0 SKIPPED, 0 FAILED Signed-off-by: Daniel Borkmann <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Reviewed-by: Alan Maguire <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]

MSGF_LEG_MASK is laid out with INTA in bit 0, INTB in bit 1, INTC in bit 2, and INTD in bit 3. Hardware IRQ numbers start at 0, and we register PCI_NUM_INTX irqs. So to enable INTA (aka hwirq 0) we should set bit 0. Remove the subtraction of one. This fixes the following UBSAN error: [ 5.037483] ================================================================================ [ 5.046260] UBSAN: shift-out-of-bounds in ../drivers/pci/controller/pcie-xilinx-nwl.c:389:11 [ 5.054983] shift exponent 18446744073709551615 is too large for 32-bit type 'int' [ 5.062813] CPU: 1 PID: 61 Comm: kworker/u10:1 Not tainted 6.6.20+ torvalds#268 [ 5.070008] Hardware name: xlnx,zynqmp (DT) [ 5.074348] Workqueue: events_unbound deferred_probe_work_func [ 5.080410] Call trace: [ 5.082958] dump_backtrace (arch/arm64/kernel/stacktrace.c:235) [ 5.086850] show_stack (arch/arm64/kernel/stacktrace.c:242) [ 5.090292] dump_stack_lvl (lib/dump_stack.c:107) [ 5.094095] dump_stack (lib/dump_stack.c:114) [ 5.097540] __ubsan_handle_shift_out_of_bounds (lib/ubsan.c:218 lib/ubsan.c:387) [ 5.103227] nwl_unmask_leg_irq (drivers/pci/controller/pcie-xilinx-nwl.c:389 (discriminator 1)) [ 5.107386] irq_enable (kernel/irq/internals.h:234 kernel/irq/chip.c:170 kernel/irq/chip.c:439 kernel/irq/chip.c:432 kernel/irq/chip.c:345) [ 5.110838] __irq_startup (kernel/irq/internals.h:239 kernel/irq/chip.c:180 kernel/irq/chip.c:250) [ 5.114552] irq_startup (kernel/irq/chip.c:270) [ 5.118266] __setup_irq (kernel/irq/manage.c:1800) [ 5.121982] request_threaded_irq (kernel/irq/manage.c:2206) [ 5.126412] pcie_pme_probe (include/linux/interrupt.h:168 drivers/pci/pcie/pme.c:348) [ 5.130303] pcie_port_probe_service (drivers/pci/pcie/portdrv.c:528) [ 5.134915] really_probe (drivers/base/dd.c:579 drivers/base/dd.c:658) [ 5.138720] __driver_probe_device (drivers/base/dd.c:800) [ 5.143236] driver_probe_device (drivers/base/dd.c:830) [ 5.147571] __device_attach_driver (drivers/base/dd.c:959) [ 5.152179] bus_for_each_drv (drivers/base/bus.c:457) [ 5.156163] __device_attach (drivers/base/dd.c:1032) [ 5.160147] device_initial_probe (drivers/base/dd.c:1080) [ 5.164488] bus_probe_device (drivers/base/bus.c:532) [ 5.168471] device_add (drivers/base/core.c:3638) [ 5.172098] device_register (drivers/base/core.c:3714) [ 5.175994] pcie_portdrv_probe (drivers/pci/pcie/portdrv.c:309 drivers/pci/pcie/portdrv.c:363 drivers/pci/pcie/portdrv.c:695) [ 5.180338] pci_device_probe (drivers/pci/pci-driver.c:324 drivers/pci/pci-driver.c:392 drivers/pci/pci-driver.c:417 drivers/pci/pci-driver.c:460) [ 5.184410] really_probe (drivers/base/dd.c:579 drivers/base/dd.c:658) [ 5.188213] __driver_probe_device (drivers/base/dd.c:800) [ 5.192729] driver_probe_device (drivers/base/dd.c:830) [ 5.197064] __device_attach_driver (drivers/base/dd.c:959) [ 5.201672] bus_for_each_drv (drivers/base/bus.c:457) [ 5.205657] __device_attach (drivers/base/dd.c:1032) [ 5.209641] device_attach (drivers/base/dd.c:1074) [ 5.213357] pci_bus_add_device (drivers/pci/bus.c:352) [ 5.217518] pci_bus_add_devices (drivers/pci/bus.c:371 (discriminator 2)) [ 5.221774] pci_host_probe (drivers/pci/probe.c:3099) [ 5.225581] nwl_pcie_probe (drivers/pci/controller/pcie-xilinx-nwl.c:938) [ 5.229562] platform_probe (drivers/base/platform.c:1404) [ 5.233367] really_probe (drivers/base/dd.c:579 drivers/base/dd.c:658) [ 5.237169] __driver_probe_device (drivers/base/dd.c:800) [ 5.241685] driver_probe_device (drivers/base/dd.c:830) [ 5.246020] __device_attach_driver (drivers/base/dd.c:959) [ 5.250628] bus_for_each_drv (drivers/base/bus.c:457) [ 5.254612] __device_attach (drivers/base/dd.c:1032) [ 5.258596] device_initial_probe (drivers/base/dd.c:1080) [ 5.262938] bus_probe_device (drivers/base/bus.c:532) [ 5.266920] deferred_probe_work_func (drivers/base/dd.c:124) [ 5.271619] process_one_work (arch/arm64/include/asm/jump_label.h:21 include/linux/jump_label.h:207 include/trace/events/workqueue.h:108 kernel/workqueue.c:2632) [ 5.275788] worker_thread (kernel/workqueue.c:2694 (discriminator 2) kernel/workqueue.c:2781 (discriminator 2)) [ 5.279686] kthread (kernel/kthread.c:388) [ 5.283048] ret_from_fork (arch/arm64/kernel/entry.S:862) [ 5.286765] ================================================================================ Fixes: 9a181e1 ("PCI: xilinx-nwl: Modify IRQ chip for legacy interrupts") Cc: <[email protected]> Signed-off-by: Sean Anderson <[email protected]>

MSGF_LEG_MASK is laid out with INTA in bit 0, INTB in bit 1, INTC in bit 2, and INTD in bit 3. Hardware IRQ numbers start at 0, and we register PCI_NUM_INTX irqs. So to enable INTA (aka hwirq 0) we should set bit 0. Remove the subtraction of one. This bug would cause legacy interrupts not to be delivered, as enabling INTB would actually enable INTA, and enabling INTA wouldn't enable anything at all. It is likely that this got overlooked for so long since most PCIe hardware uses MSIs. This fixes the following UBSAN error: UBSAN: shift-out-of-bounds in ../drivers/pci/controller/pcie-xilinx-nwl.c:389:11 shift exponent 18446744073709551615 is too large for 32-bit type 'int' CPU: 1 PID: 61 Comm: kworker/u10:1 Not tainted 6.6.20+ torvalds#268 Hardware name: xlnx,zynqmp (DT) Workqueue: events_unbound deferred_probe_work_func Call trace: dump_backtrace (arch/arm64/kernel/stacktrace.c:235) show_stack (arch/arm64/kernel/stacktrace.c:242) dump_stack_lvl (lib/dump_stack.c:107) dump_stack (lib/dump_stack.c:114) __ubsan_handle_shift_out_of_bounds (lib/ubsan.c:218 lib/ubsan.c:387) nwl_unmask_leg_irq (drivers/pci/controller/pcie-xilinx-nwl.c:389 (discriminator 1)) irq_enable (kernel/irq/internals.h:234 kernel/irq/chip.c:170 kernel/irq/chip.c:439 kernel/irq/chip.c:432 kernel/irq/chip.c:345) __irq_startup (kernel/irq/internals.h:239 kernel/irq/chip.c:180 kernel/irq/chip.c:250) irq_startup (kernel/irq/chip.c:270) __setup_irq (kernel/irq/manage.c:1800) request_threaded_irq (kernel/irq/manage.c:2206) pcie_pme_probe (include/linux/interrupt.h:168 drivers/pci/pcie/pme.c:348) <snip> Fixes: 9a181e1 ("PCI: xilinx-nwl: Modify IRQ chip for legacy interrupts") Cc: <[email protected]> Signed-off-by: Sean Anderson <[email protected]>

MSGF_LEG_MASK is laid out with INTA in bit 0, INTB in bit 1, INTC in bit 2, and INTD in bit 3. Hardware IRQ numbers start at 0, and we register PCI_NUM_INTX IRQs. So to enable INTA (aka hwirq 0) we should set bit 0. Remove the subtraction of one. This bug would cause INTx interrupts not to be delivered, as enabling INTB would actually enable INTA, and enabling INTA wouldn't enable anything at all. It is likely that this got overlooked for so long since most PCIe hardware uses MSIs. This fixes the following UBSAN error: UBSAN: shift-out-of-bounds in ../drivers/pci/controller/pcie-xilinx-nwl.c:389:11 shift exponent 18446744073709551615 is too large for 32-bit type 'int' CPU: 1 PID: 61 Comm: kworker/u10:1 Not tainted 6.6.20+ torvalds#268 Hardware name: xlnx,zynqmp (DT) Workqueue: events_unbound deferred_probe_work_func Call trace: dump_backtrace (arch/arm64/kernel/stacktrace.c:235) show_stack (arch/arm64/kernel/stacktrace.c:242) dump_stack_lvl (lib/dump_stack.c:107) dump_stack (lib/dump_stack.c:114) __ubsan_handle_shift_out_of_bounds (lib/ubsan.c:218 lib/ubsan.c:387) nwl_unmask_leg_irq (drivers/pci/controller/pcie-xilinx-nwl.c:389 (discriminator 1)) irq_enable (kernel/irq/internals.h:234 kernel/irq/chip.c:170 kernel/irq/chip.c:439 kernel/irq/chip.c:432 kernel/irq/chip.c:345) __irq_startup (kernel/irq/internals.h:239 kernel/irq/chip.c:180 kernel/irq/chip.c:250) irq_startup (kernel/irq/chip.c:270) __setup_irq (kernel/irq/manage.c:1800) request_threaded_irq (kernel/irq/manage.c:2206) pcie_pme_probe (include/linux/interrupt.h:168 drivers/pci/pcie/pme.c:348) Fixes: 9a181e1 ("PCI: xilinx-nwl: Modify IRQ chip for legacy interrupts") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sean Anderson <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Cc: [email protected]

commit 0199d2f upstream. MSGF_LEG_MASK is laid out with INTA in bit 0, INTB in bit 1, INTC in bit 2, and INTD in bit 3. Hardware IRQ numbers start at 0, and we register PCI_NUM_INTX IRQs. So to enable INTA (aka hwirq 0) we should set bit 0. Remove the subtraction of one. This bug would cause INTx interrupts not to be delivered, as enabling INTB would actually enable INTA, and enabling INTA wouldn't enable anything at all. It is likely that this got overlooked for so long since most PCIe hardware uses MSIs. This fixes the following UBSAN error: UBSAN: shift-out-of-bounds in ../drivers/pci/controller/pcie-xilinx-nwl.c:389:11 shift exponent 18446744073709551615 is too large for 32-bit type 'int' CPU: 1 PID: 61 Comm: kworker/u10:1 Not tainted 6.6.20+ torvalds#268 Hardware name: xlnx,zynqmp (DT) Workqueue: events_unbound deferred_probe_work_func Call trace: dump_backtrace (arch/arm64/kernel/stacktrace.c:235) show_stack (arch/arm64/kernel/stacktrace.c:242) dump_stack_lvl (lib/dump_stack.c:107) dump_stack (lib/dump_stack.c:114) __ubsan_handle_shift_out_of_bounds (lib/ubsan.c:218 lib/ubsan.c:387) nwl_unmask_leg_irq (drivers/pci/controller/pcie-xilinx-nwl.c:389 (discriminator 1)) irq_enable (kernel/irq/internals.h:234 kernel/irq/chip.c:170 kernel/irq/chip.c:439 kernel/irq/chip.c:432 kernel/irq/chip.c:345) __irq_startup (kernel/irq/internals.h:239 kernel/irq/chip.c:180 kernel/irq/chip.c:250) irq_startup (kernel/irq/chip.c:270) __setup_irq (kernel/irq/manage.c:1800) request_threaded_irq (kernel/irq/manage.c:2206) pcie_pme_probe (include/linux/interrupt.h:168 drivers/pci/pcie/pme.c:348) Fixes: 9a181e1 ("PCI: xilinx-nwl: Modify IRQ chip for legacy interrupts") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sean Anderson <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Cc: [email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit 0199d2f ] MSGF_LEG_MASK is laid out with INTA in bit 0, INTB in bit 1, INTC in bit 2, and INTD in bit 3. Hardware IRQ numbers start at 0, and we register PCI_NUM_INTX IRQs. So to enable INTA (aka hwirq 0) we should set bit 0. Remove the subtraction of one. This bug would cause INTx interrupts not to be delivered, as enabling INTB would actually enable INTA, and enabling INTA wouldn't enable anything at all. It is likely that this got overlooked for so long since most PCIe hardware uses MSIs. This fixes the following UBSAN error: UBSAN: shift-out-of-bounds in ../drivers/pci/controller/pcie-xilinx-nwl.c:389:11 shift exponent 18446744073709551615 is too large for 32-bit type 'int' CPU: 1 PID: 61 Comm: kworker/u10:1 Not tainted 6.6.20+ torvalds#268 Hardware name: xlnx,zynqmp (DT) Workqueue: events_unbound deferred_probe_work_func Call trace: dump_backtrace (arch/arm64/kernel/stacktrace.c:235) show_stack (arch/arm64/kernel/stacktrace.c:242) dump_stack_lvl (lib/dump_stack.c:107) dump_stack (lib/dump_stack.c:114) __ubsan_handle_shift_out_of_bounds (lib/ubsan.c:218 lib/ubsan.c:387) nwl_unmask_leg_irq (drivers/pci/controller/pcie-xilinx-nwl.c:389 (discriminator 1)) irq_enable (kernel/irq/internals.h:234 kernel/irq/chip.c:170 kernel/irq/chip.c:439 kernel/irq/chip.c:432 kernel/irq/chip.c:345) __irq_startup (kernel/irq/internals.h:239 kernel/irq/chip.c:180 kernel/irq/chip.c:250) irq_startup (kernel/irq/chip.c:270) __setup_irq (kernel/irq/manage.c:1800) request_threaded_irq (kernel/irq/manage.c:2206) pcie_pme_probe (include/linux/interrupt.h:168 drivers/pci/pcie/pme.c:348) Fixes: 9a181e1 ("PCI: xilinx-nwl: Modify IRQ chip for legacy interrupts") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sean Anderson <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Cc: [email protected] Signed-off-by: Sasha Levin <[email protected]>

commit 0199d2f upstream. MSGF_LEG_MASK is laid out with INTA in bit 0, INTB in bit 1, INTC in bit 2, and INTD in bit 3. Hardware IRQ numbers start at 0, and we register PCI_NUM_INTX IRQs. So to enable INTA (aka hwirq 0) we should set bit 0. Remove the subtraction of one. This bug would cause INTx interrupts not to be delivered, as enabling INTB would actually enable INTA, and enabling INTA wouldn't enable anything at all. It is likely that this got overlooked for so long since most PCIe hardware uses MSIs. This fixes the following UBSAN error: UBSAN: shift-out-of-bounds in ../drivers/pci/controller/pcie-xilinx-nwl.c:389:11 shift exponent 18446744073709551615 is too large for 32-bit type 'int' CPU: 1 PID: 61 Comm: kworker/u10:1 Not tainted 6.6.20+ torvalds#268 Hardware name: xlnx,zynqmp (DT) Workqueue: events_unbound deferred_probe_work_func Call trace: dump_backtrace (arch/arm64/kernel/stacktrace.c:235) show_stack (arch/arm64/kernel/stacktrace.c:242) dump_stack_lvl (lib/dump_stack.c:107) dump_stack (lib/dump_stack.c:114) __ubsan_handle_shift_out_of_bounds (lib/ubsan.c:218 lib/ubsan.c:387) nwl_unmask_leg_irq (drivers/pci/controller/pcie-xilinx-nwl.c:389 (discriminator 1)) irq_enable (kernel/irq/internals.h:234 kernel/irq/chip.c:170 kernel/irq/chip.c:439 kernel/irq/chip.c:432 kernel/irq/chip.c:345) __irq_startup (kernel/irq/internals.h:239 kernel/irq/chip.c:180 kernel/irq/chip.c:250) irq_startup (kernel/irq/chip.c:270) __setup_irq (kernel/irq/manage.c:1800) request_threaded_irq (kernel/irq/manage.c:2206) pcie_pme_probe (include/linux/interrupt.h:168 drivers/pci/pcie/pme.c:348) Fixes: 9a181e1 ("PCI: xilinx-nwl: Modify IRQ chip for legacy interrupts") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sean Anderson <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Cc: [email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit 0199d2f ] MSGF_LEG_MASK is laid out with INTA in bit 0, INTB in bit 1, INTC in bit 2, and INTD in bit 3. Hardware IRQ numbers start at 0, and we register PCI_NUM_INTX IRQs. So to enable INTA (aka hwirq 0) we should set bit 0. Remove the subtraction of one. This bug would cause INTx interrupts not to be delivered, as enabling INTB would actually enable INTA, and enabling INTA wouldn't enable anything at all. It is likely that this got overlooked for so long since most PCIe hardware uses MSIs. This fixes the following UBSAN error: UBSAN: shift-out-of-bounds in ../drivers/pci/controller/pcie-xilinx-nwl.c:389:11 shift exponent 18446744073709551615 is too large for 32-bit type 'int' CPU: 1 PID: 61 Comm: kworker/u10:1 Not tainted 6.6.20+ torvalds#268 Hardware name: xlnx,zynqmp (DT) Workqueue: events_unbound deferred_probe_work_func Call trace: dump_backtrace (arch/arm64/kernel/stacktrace.c:235) show_stack (arch/arm64/kernel/stacktrace.c:242) dump_stack_lvl (lib/dump_stack.c:107) dump_stack (lib/dump_stack.c:114) __ubsan_handle_shift_out_of_bounds (lib/ubsan.c:218 lib/ubsan.c:387) nwl_unmask_leg_irq (drivers/pci/controller/pcie-xilinx-nwl.c:389 (discriminator 1)) irq_enable (kernel/irq/internals.h:234 kernel/irq/chip.c:170 kernel/irq/chip.c:439 kernel/irq/chip.c:432 kernel/irq/chip.c:345) __irq_startup (kernel/irq/internals.h:239 kernel/irq/chip.c:180 kernel/irq/chip.c:250) irq_startup (kernel/irq/chip.c:270) __setup_irq (kernel/irq/manage.c:1800) request_threaded_irq (kernel/irq/manage.c:2206) pcie_pme_probe (include/linux/interrupt.h:168 drivers/pci/pcie/pme.c:348) Fixes: 9a181e1 ("PCI: xilinx-nwl: Modify IRQ chip for legacy interrupts") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sean Anderson <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Cc: [email protected] Signed-off-by: Sasha Levin <[email protected]>

Credits

3c28ef4

laijs pushed a commit to laijs/linux that referenced this pull request Feb 13, 2017

Merge pull request torvalds#268 from libos-nuse/fix-renameat

e79e2ea

lkl: follow RENAMEAT changes from linus upstream tree

nbdd0121 pushed a commit to nbdd0121/linux that referenced this pull request May 20, 2021

Merge pull request torvalds#268 from TheSven73/rust-for-linux-ptr-err

776af46

rust/error: add helper function to convert a C error pointer to a `Result`

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Credits #268

Credits #268

rdcaceres commented Mar 24, 2016

jogacolhue commented Mar 30, 2016

Credits #268

Are you sure you want to change the base?

Credits #268

Conversation

rdcaceres commented Mar 24, 2016

jogacolhue commented Mar 30, 2016