Added code for custom file prefetching #289

ravippandey · 2016-05-19T10:09:36Z

This file prefetching algorithm works on the basis of access patterns of a given
file type and the cache pressure. This patch adds the code for measuring the
cache pressure, identify filetype and get the access pattern of that file.
This patch also sets up a sysctl variable to change the prefetching algorihtm.

This file prefetching algorithm works on the basis of access patterns of a given file type and the cache pressure. This patch adds the code for measuring the cache pressure, identify filetype and get the access pattern of that file. This patch also sets up a sysctl variable to change the prefetching algorihtm.

commit 2b021cb upstream. Before 2e91fa7 ("cgroup: keep zombies associated with their original cgroups"), all dead tasks were associated with init_css_set. If a zombie task is requested for migration, while migration prep operations would still be performed on init_css_set, the actual migration would ignore zombie tasks. As init_css_set is always valid, this worked fine. However, after 2e91fa7, zombie tasks stay with the css_set it was associated with at the time of death. Let's say a task T associated with cgroup A on hierarchy H-1 and cgroup B on hiearchy H-2. After T becomes a zombie, it would still remain associated with A and B. If A only contains zombie tasks, it can be removed. On removal, A gets marked offline but stays pinned until all zombies are drained. At this point, if migration is initiated on T to a cgroup C on hierarchy H-2, migration path would try to prepare T's css_set for migration and trigger the following. WARNING: CPU: 0 PID: 1576 at kernel/cgroup.c:474 cgroup_get+0x121/0x160() CPU: 0 PID: 1576 Comm: bash Not tainted 4.4.0-work+ torvalds#289 ... Call Trace: [<ffffffff8127e63c>] dump_stack+0x4e/0x82 [<ffffffff810445e8>] warn_slowpath_common+0x78/0xb0 [<ffffffff810446d5>] warn_slowpath_null+0x15/0x20 [<ffffffff810c33e1>] cgroup_get+0x121/0x160 [<ffffffff810c349b>] link_css_set+0x7b/0x90 [<ffffffff810c4fbc>] find_css_set+0x3bc/0x5e0 [<ffffffff810c5269>] cgroup_migrate_prepare_dst+0x89/0x1f0 [<ffffffff810c7547>] cgroup_attach_task+0x157/0x230 [<ffffffff810c7a17>] __cgroup_procs_write+0x2b7/0x470 [<ffffffff810c7bdc>] cgroup_tasks_write+0xc/0x10 [<ffffffff810c4790>] cgroup_file_write+0x30/0x1b0 [<ffffffff811c68fc>] kernfs_fop_write+0x13c/0x180 [<ffffffff81151673>] __vfs_write+0x23/0xe0 [<ffffffff81152494>] vfs_write+0xa4/0x1a0 [<ffffffff811532d4>] SyS_write+0x44/0xa0 [<ffffffff814af2d7>] entry_SYSCALL_64_fastpath+0x12/0x6f It doesn't make sense to prepare migration for css_sets pointing to dead cgroups as they are guaranteed to contain only zombies which are ignored later during migration. This patch makes cgroup destruction path mark all affected css_sets as dead and updates the migration path to ignore them during preparation. Signed-off-by: Tejun Heo <[email protected]> Fixes: 2e91fa7 ("cgroup: keep zombies associated with their original cgroups") Signed-off-by: Greg Kroah-Hartman <[email protected]>

This commits adds verifier tests covering per-cpu cgroup storage functionality. There are 6 new tests, which are exactly the same as for shared cgroup storage, but do use per-cpu cgroup storage map. Expected output: $ ./test_verifier #0/u add+sub+mul OK #0/p add+sub+mul OK ... torvalds#286/p invalid cgroup storage access 6 OK torvalds#287/p valid per-cpu cgroup storage access OK torvalds#288/p invalid per-cpu cgroup storage access 1 OK torvalds#289/p invalid per-cpu cgroup storage access 2 OK torvalds#290/p invalid per-cpu cgroup storage access 3 OK torvalds#291/p invalid per-cpu cgroup storage access 4 OK torvalds#292/p invalid per-cpu cgroup storage access 5 OK torvalds#293/p invalid per-cpu cgroup storage access 6 OK torvalds#294/p multiple registers share map_lookup_elem result OK ... torvalds#662/p mov64 src == dst OK torvalds#663/p mov64 src != dst OK Summary: 914 PASSED, 0 SKIPPED, 0 FAILED Signed-off-by: Roman Gushchin <[email protected]> Cc: Daniel Borkmann <[email protected]> Cc: Alexei Starovoitov <[email protected]>

This commits adds verifier tests covering per-cpu cgroup storage functionality. There are 6 new tests, which are exactly the same as for shared cgroup storage, but do use per-cpu cgroup storage map. Expected output: $ ./test_verifier #0/u add+sub+mul OK #0/p add+sub+mul OK ... torvalds#286/p invalid cgroup storage access 6 OK torvalds#287/p valid per-cpu cgroup storage access OK torvalds#288/p invalid per-cpu cgroup storage access 1 OK torvalds#289/p invalid per-cpu cgroup storage access 2 OK torvalds#290/p invalid per-cpu cgroup storage access 3 OK torvalds#291/p invalid per-cpu cgroup storage access 4 OK torvalds#292/p invalid per-cpu cgroup storage access 5 OK torvalds#293/p invalid per-cpu cgroup storage access 6 OK torvalds#294/p multiple registers share map_lookup_elem result OK ... torvalds#662/p mov64 src == dst OK torvalds#663/p mov64 src != dst OK Summary: 914 PASSED, 0 SKIPPED, 0 FAILED Signed-off-by: Roman Gushchin <[email protected]> Acked-by: Song Liu <[email protected]> Cc: Daniel Borkmann <[email protected]> Cc: Alexei Starovoitov <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>

This commits adds verifier tests covering per-cpu cgroup storage functionality. There are 6 new tests, which are exactly the same as for shared cgroup storage, but do use per-cpu cgroup storage map. Expected output: $ ./test_verifier #0/u add+sub+mul OK #0/p add+sub+mul OK ... torvalds#286/p invalid cgroup storage access 6 OK torvalds#287/p valid per-cpu cgroup storage access OK torvalds#288/p invalid per-cpu cgroup storage access 1 OK torvalds#289/p invalid per-cpu cgroup storage access 2 OK torvalds#290/p invalid per-cpu cgroup storage access 3 OK torvalds#291/p invalid per-cpu cgroup storage access 4 OK torvalds#292/p invalid per-cpu cgroup storage access 5 OK torvalds#293/p invalid per-cpu cgroup storage access 6 OK torvalds#294/p multiple registers share map_lookup_elem result OK ... torvalds#662/p mov64 src == dst OK torvalds#663/p mov64 src != dst OK Summary: 914 PASSED, 0 SKIPPED, 0 FAILED Signed-off-by: Roman Gushchin <[email protected]> Acked-by: Song Liu <[email protected]> Cc: Daniel Borkmann <[email protected]> Cc: Alexei Starovoitov <[email protected]>

This commits adds verifier tests covering per-cpu cgroup storage functionality. There are 6 new tests, which are exactly the same as for shared cgroup storage, but do use per-cpu cgroup storage map. Expected output: $ ./test_verifier #0/u add+sub+mul OK #0/p add+sub+mul OK ... torvalds#286/p invalid cgroup storage access 6 OK torvalds#287/p valid per-cpu cgroup storage access OK torvalds#288/p invalid per-cpu cgroup storage access 1 OK torvalds#289/p invalid per-cpu cgroup storage access 2 OK torvalds#290/p invalid per-cpu cgroup storage access 3 OK torvalds#291/p invalid per-cpu cgroup storage access 4 OK torvalds#292/p invalid per-cpu cgroup storage access 5 OK torvalds#293/p invalid per-cpu cgroup storage access 6 OK torvalds#294/p multiple registers share map_lookup_elem result OK ... torvalds#662/p mov64 src == dst OK torvalds#663/p mov64 src != dst OK Summary: 914 PASSED, 0 SKIPPED, 0 FAILED Signed-off-by: Roman Gushchin <[email protected]> Acked-by: Song Liu <[email protected]> Cc: Daniel Borkmann <[email protected]> Cc: Alexei Starovoitov <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>

…it() When enabling KASAN and DEBUG_TEST_DRIVER_REMOVE, I find this KASAN warning: [ 20.872057] BUG: KASAN: use-after-free in pcc_data_alloc+0x40/0xb8 [ 20.878226] Read of size 4 at addr ffff00236cdeb684 by task swapper/0/1 [ 20.884826] [ 20.886309] CPU: 19 PID: 1 Comm: swapper/0 Not tainted 5.4.0-rc1-00009-ge7f7df3db5bf-dirty #289 [ 20.894994] Hardware name: Huawei D06 /D06, BIOS Hisilicon D06 UEFI RC0 - V1.16.01 03/15/2019 [ 20.903505] Call trace: [ 20.905942] dump_backtrace+0x0/0x200 [ 20.909593] show_stack+0x14/0x20 [ 20.912899] dump_stack+0xd4/0x130 [ 20.916291] print_address_description.isra.9+0x6c/0x3b8 [ 20.921592] __kasan_report+0x12c/0x23c [ 20.925417] kasan_report+0xc/0x18 [ 20.928808] __asan_load4+0x94/0xb8 [ 20.932286] pcc_data_alloc+0x40/0xb8 [ 20.935938] acpi_cppc_processor_probe+0x4e8/0xb08 [ 20.940717] __acpi_processor_start+0x48/0xb0 [ 20.945062] acpi_processor_start+0x40/0x60 [ 20.949235] really_probe+0x118/0x548 [ 20.952887] driver_probe_device+0x7c/0x148 [ 20.957059] device_driver_attach+0x94/0xa0 [ 20.961231] __driver_attach+0xa4/0x110 [ 20.965055] bus_for_each_dev+0xe8/0x158 [ 20.968966] driver_attach+0x30/0x40 [ 20.972531] bus_add_driver+0x234/0x2f0 [ 20.976356] driver_register+0xbc/0x1d0 [ 20.980182] acpi_processor_driver_init+0x40/0xe4 [ 20.984875] do_one_initcall+0xb4/0x254 [ 20.988700] kernel_init_freeable+0x24c/0x2f8 [ 20.993047] kernel_init+0x10/0x118 [ 20.996524] ret_from_fork+0x10/0x18 [ 21.000087] [ 21.001567] Allocated by task 1: [ 21.004785] save_stack+0x28/0xc8 [ 21.008089] __kasan_kmalloc.isra.9+0xbc/0xd8 [ 21.012435] kasan_kmalloc+0xc/0x18 [ 21.015913] pcc_data_alloc+0x94/0xb8 [ 21.019564] acpi_cppc_processor_probe+0x4e8/0xb08 [ 21.024343] __acpi_processor_start+0x48/0xb0 [ 21.028689] acpi_processor_start+0x40/0x60 [ 21.032860] really_probe+0x118/0x548 [ 21.036512] driver_probe_device+0x7c/0x148 [ 21.040684] device_driver_attach+0x94/0xa0 [ 21.044855] __driver_attach+0xa4/0x110 [ 21.048680] bus_for_each_dev+0xe8/0x158 [ 21.052591] driver_attach+0x30/0x40 [ 21.056155] bus_add_driver+0x234/0x2f0 [ 21.059980] driver_register+0xbc/0x1d0 [ 21.063805] acpi_processor_driver_init+0x40/0xe4 [ 21.068497] do_one_initcall+0xb4/0x254 [ 21.072322] kernel_init_freeable+0x24c/0x2f8 [ 21.076667] kernel_init+0x10/0x118 [ 21.080144] ret_from_fork+0x10/0x18 [ 21.083707] [ 21.085186] Freed by task 1: [ 21.088056] save_stack+0x28/0xc8 [ 21.091360] __kasan_slab_free+0x118/0x180 [ 21.095445] kasan_slab_free+0x10/0x18 [ 21.099183] kfree+0x80/0x268 [ 21.102139] acpi_cppc_processor_exit+0x1a8/0x1b8 [ 21.106832] acpi_processor_stop+0x70/0x80 [ 21.110917] really_probe+0x174/0x548 [ 21.114568] driver_probe_device+0x7c/0x148 [ 21.118740] device_driver_attach+0x94/0xa0 [ 21.122912] __driver_attach+0xa4/0x110 [ 21.126736] bus_for_each_dev+0xe8/0x158 [ 21.130648] driver_attach+0x30/0x40 [ 21.134212] bus_add_driver+0x234/0x2f0 [ 21.0x10/0x18 [ 21.161764] [ 21.163244] The buggy address belongs to the object at ffff00236cdeb600 [ 21.163244] which belongs to the cache kmalloc-256 of size 256 [ 21.175750] The buggy address is located 132 bytes inside of [ 21.175750] 256-byte region [ffff00236cdeb600, ffff00236cdeb700) [ 21.187473] The buggy address belongs to the page: [ 21.192254] page:fffffe008d937a00 refcount:1 mapcount:0 mapping:ffff002370c0fa00 index:0x0 compound_mapcount: 0 [ 21.202331] flags: 0x1ffff00000010200(slab|head) [ 21.206940] raw: 1ffff00000010200 dead000000000100 dead000000000122 ffff002370c0fa00 [ 21.214671] raw: 0000000000000000 00000000802a002a 00000001ffffffff 0000000000000000 [ 21.222400] page dumped because: kasan: bad access detected [ 21.227959] [ 21.229438] Memory state around the buggy address: [ 21.234218] ffff00236cdeb580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 21.241427] ffff00236cdeb600: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 21.248637] >ffff00236cdeb680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 21.255845] ^ [ 21.259062] ffff00236cdeb700: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 21.266272] ffff00236cdeb780: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 21.273480] ================================================================== It seems that global pcc_data[pcc_ss_id] can be freed in acpi_cppc_processor_exit(), but we may later reference this value, so NULLify it when freed. Also remove the useless setting of data "pcc_channel_acquired", which we're about to free. Fixes: 85b1407 ("ACPI / CPPC: Make CPPC ACPI driver aware of PCC subspace IDs") Signed-off-by: John Garry <[email protected]> Cc: 4.15+ <[email protected]> # 4.15+ Signed-off-by: Rafael J. Wysocki <[email protected]>

…it() When enabling KASAN and DEBUG_TEST_DRIVER_REMOVE, I find this KASAN warning: [ 20.872057] BUG: KASAN: use-after-free in pcc_data_alloc+0x40/0xb8 [ 20.878226] Read of size 4 at addr ffff00236cdeb684 by task swapper/0/1 [ 20.884826] [ 20.886309] CPU: 19 PID: 1 Comm: swapper/0 Not tainted 5.4.0-rc1-00009-ge7f7df3db5bf-dirty torvalds#289 [ 20.894994] Hardware name: Huawei D06 /D06, BIOS Hisilicon D06 UEFI RC0 - V1.16.01 03/15/2019 [ 20.903505] Call trace: [ 20.905942] dump_backtrace+0x0/0x200 [ 20.909593] show_stack+0x14/0x20 [ 20.912899] dump_stack+0xd4/0x130 [ 20.916291] print_address_description.isra.9+0x6c/0x3b8 [ 20.921592] __kasan_report+0x12c/0x23c [ 20.925417] kasan_report+0xc/0x18 [ 20.928808] __asan_load4+0x94/0xb8 [ 20.932286] pcc_data_alloc+0x40/0xb8 [ 20.935938] acpi_cppc_processor_probe+0x4e8/0xb08 [ 20.940717] __acpi_processor_start+0x48/0xb0 [ 20.945062] acpi_processor_start+0x40/0x60 [ 20.949235] really_probe+0x118/0x548 [ 20.952887] driver_probe_device+0x7c/0x148 [ 20.957059] device_driver_attach+0x94/0xa0 [ 20.961231] __driver_attach+0xa4/0x110 [ 20.965055] bus_for_each_dev+0xe8/0x158 [ 20.968966] driver_attach+0x30/0x40 [ 20.972531] bus_add_driver+0x234/0x2f0 [ 20.976356] driver_register+0xbc/0x1d0 [ 20.980182] acpi_processor_driver_init+0x40/0xe4 [ 20.984875] do_one_initcall+0xb4/0x254 [ 20.988700] kernel_init_freeable+0x24c/0x2f8 [ 20.993047] kernel_init+0x10/0x118 [ 20.996524] ret_from_fork+0x10/0x18 [ 21.000087] [ 21.001567] Allocated by task 1: [ 21.004785] save_stack+0x28/0xc8 [ 21.008089] __kasan_kmalloc.isra.9+0xbc/0xd8 [ 21.012435] kasan_kmalloc+0xc/0x18 [ 21.015913] pcc_data_alloc+0x94/0xb8 [ 21.019564] acpi_cppc_processor_probe+0x4e8/0xb08 [ 21.024343] __acpi_processor_start+0x48/0xb0 [ 21.028689] acpi_processor_start+0x40/0x60 [ 21.032860] really_probe+0x118/0x548 [ 21.036512] driver_probe_device+0x7c/0x148 [ 21.040684] device_driver_attach+0x94/0xa0 [ 21.044855] __driver_attach+0xa4/0x110 [ 21.048680] bus_for_each_dev+0xe8/0x158 [ 21.052591] driver_attach+0x30/0x40 [ 21.056155] bus_add_driver+0x234/0x2f0 [ 21.059980] driver_register+0xbc/0x1d0 [ 21.063805] acpi_processor_driver_init+0x40/0xe4 [ 21.068497] do_one_initcall+0xb4/0x254 [ 21.072322] kernel_init_freeable+0x24c/0x2f8 [ 21.076667] kernel_init+0x10/0x118 [ 21.080144] ret_from_fork+0x10/0x18 [ 21.083707] [ 21.085186] Freed by task 1: [ 21.088056] save_stack+0x28/0xc8 [ 21.091360] __kasan_slab_free+0x118/0x180 [ 21.095445] kasan_slab_free+0x10/0x18 [ 21.099183] kfree+0x80/0x268 [ 21.102139] acpi_cppc_processor_exit+0x1a8/0x1b8 [ 21.106832] acpi_processor_stop+0x70/0x80 [ 21.110917] really_probe+0x174/0x548 [ 21.114568] driver_probe_device+0x7c/0x148 [ 21.118740] device_driver_attach+0x94/0xa0 [ 21.122912] __driver_attach+0xa4/0x110 [ 21.126736] bus_for_each_dev+0xe8/0x158 [ 21.130648] driver_attach+0x30/0x40 [ 21.134212] bus_add_driver+0x234/0x2f0 [ 21.0x10/0x18 [ 21.161764] [ 21.163244] The buggy address belongs to the object at ffff00236cdeb600 [ 21.163244] which belongs to the cache kmalloc-256 of size 256 [ 21.175750] The buggy address is located 132 bytes inside of [ 21.175750] 256-byte region [ffff00236cdeb600, ffff00236cdeb700) [ 21.187473] The buggy address belongs to the page: [ 21.192254] page:fffffe008d937a00 refcount:1 mapcount:0 mapping:ffff002370c0fa00 index:0x0 compound_mapcount: 0 [ 21.202331] flags: 0x1ffff00000010200(slab|head) [ 21.206940] raw: 1ffff00000010200 dead000000000100 dead000000000122 ffff002370c0fa00 [ 21.214671] raw: 0000000000000000 00000000802a002a 00000001ffffffff 0000000000000000 [ 21.222400] page dumped because: kasan: bad access detected [ 21.227959] [ 21.229438] Memory state around the buggy address: [ 21.234218] ffff00236cdeb580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 21.241427] ffff00236cdeb600: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 21.248637] >ffff00236cdeb680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 21.255845] ^ [ 21.259062] ffff00236cdeb700: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 21.266272] ffff00236cdeb780: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 21.273480] ================================================================== It seems that global pcc_data[pcc_ss_id] can be freed in acpi_cppc_processor_exit(), but we may later reference this value, so NULLify it when freed. Also remove the useless setting of data "pcc_channel_acquired", which we're about to free. Signed-off-by: John Garry <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>

…it() commit 56a0b97 upstream. When enabling KASAN and DEBUG_TEST_DRIVER_REMOVE, I find this KASAN warning: [ 20.872057] BUG: KASAN: use-after-free in pcc_data_alloc+0x40/0xb8 [ 20.878226] Read of size 4 at addr ffff00236cdeb684 by task swapper/0/1 [ 20.884826] [ 20.886309] CPU: 19 PID: 1 Comm: swapper/0 Not tainted 5.4.0-rc1-00009-ge7f7df3db5bf-dirty torvalds#289 [ 20.894994] Hardware name: Huawei D06 /D06, BIOS Hisilicon D06 UEFI RC0 - V1.16.01 03/15/2019 [ 20.903505] Call trace: [ 20.905942] dump_backtrace+0x0/0x200 [ 20.909593] show_stack+0x14/0x20 [ 20.912899] dump_stack+0xd4/0x130 [ 20.916291] print_address_description.isra.9+0x6c/0x3b8 [ 20.921592] __kasan_report+0x12c/0x23c [ 20.925417] kasan_report+0xc/0x18 [ 20.928808] __asan_load4+0x94/0xb8 [ 20.932286] pcc_data_alloc+0x40/0xb8 [ 20.935938] acpi_cppc_processor_probe+0x4e8/0xb08 [ 20.940717] __acpi_processor_start+0x48/0xb0 [ 20.945062] acpi_processor_start+0x40/0x60 [ 20.949235] really_probe+0x118/0x548 [ 20.952887] driver_probe_device+0x7c/0x148 [ 20.957059] device_driver_attach+0x94/0xa0 [ 20.961231] __driver_attach+0xa4/0x110 [ 20.965055] bus_for_each_dev+0xe8/0x158 [ 20.968966] driver_attach+0x30/0x40 [ 20.972531] bus_add_driver+0x234/0x2f0 [ 20.976356] driver_register+0xbc/0x1d0 [ 20.980182] acpi_processor_driver_init+0x40/0xe4 [ 20.984875] do_one_initcall+0xb4/0x254 [ 20.988700] kernel_init_freeable+0x24c/0x2f8 [ 20.993047] kernel_init+0x10/0x118 [ 20.996524] ret_from_fork+0x10/0x18 [ 21.000087] [ 21.001567] Allocated by task 1: [ 21.004785] save_stack+0x28/0xc8 [ 21.008089] __kasan_kmalloc.isra.9+0xbc/0xd8 [ 21.012435] kasan_kmalloc+0xc/0x18 [ 21.015913] pcc_data_alloc+0x94/0xb8 [ 21.019564] acpi_cppc_processor_probe+0x4e8/0xb08 [ 21.024343] __acpi_processor_start+0x48/0xb0 [ 21.028689] acpi_processor_start+0x40/0x60 [ 21.032860] really_probe+0x118/0x548 [ 21.036512] driver_probe_device+0x7c/0x148 [ 21.040684] device_driver_attach+0x94/0xa0 [ 21.044855] __driver_attach+0xa4/0x110 [ 21.048680] bus_for_each_dev+0xe8/0x158 [ 21.052591] driver_attach+0x30/0x40 [ 21.056155] bus_add_driver+0x234/0x2f0 [ 21.059980] driver_register+0xbc/0x1d0 [ 21.063805] acpi_processor_driver_init+0x40/0xe4 [ 21.068497] do_one_initcall+0xb4/0x254 [ 21.072322] kernel_init_freeable+0x24c/0x2f8 [ 21.076667] kernel_init+0x10/0x118 [ 21.080144] ret_from_fork+0x10/0x18 [ 21.083707] [ 21.085186] Freed by task 1: [ 21.088056] save_stack+0x28/0xc8 [ 21.091360] __kasan_slab_free+0x118/0x180 [ 21.095445] kasan_slab_free+0x10/0x18 [ 21.099183] kfree+0x80/0x268 [ 21.102139] acpi_cppc_processor_exit+0x1a8/0x1b8 [ 21.106832] acpi_processor_stop+0x70/0x80 [ 21.110917] really_probe+0x174/0x548 [ 21.114568] driver_probe_device+0x7c/0x148 [ 21.118740] device_driver_attach+0x94/0xa0 [ 21.122912] __driver_attach+0xa4/0x110 [ 21.126736] bus_for_each_dev+0xe8/0x158 [ 21.130648] driver_attach+0x30/0x40 [ 21.134212] bus_add_driver+0x234/0x2f0 [ 21.0x10/0x18 [ 21.161764] [ 21.163244] The buggy address belongs to the object at ffff00236cdeb600 [ 21.163244] which belongs to the cache kmalloc-256 of size 256 [ 21.175750] The buggy address is located 132 bytes inside of [ 21.175750] 256-byte region [ffff00236cdeb600, ffff00236cdeb700) [ 21.187473] The buggy address belongs to the page: [ 21.192254] page:fffffe008d937a00 refcount:1 mapcount:0 mapping:ffff002370c0fa00 index:0x0 compound_mapcount: 0 [ 21.202331] flags: 0x1ffff00000010200(slab|head) [ 21.206940] raw: 1ffff00000010200 dead000000000100 dead000000000122 ffff002370c0fa00 [ 21.214671] raw: 0000000000000000 00000000802a002a 00000001ffffffff 0000000000000000 [ 21.222400] page dumped because: kasan: bad access detected [ 21.227959] [ 21.229438] Memory state around the buggy address: [ 21.234218] ffff00236cdeb580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 21.241427] ffff00236cdeb600: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 21.248637] >ffff00236cdeb680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 21.255845] ^ [ 21.259062] ffff00236cdeb700: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 21.266272] ffff00236cdeb780: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 21.273480] ================================================================== It seems that global pcc_data[pcc_ss_id] can be freed in acpi_cppc_processor_exit(), but we may later reference this value, so NULLify it when freed. Also remove the useless setting of data "pcc_channel_acquired", which we're about to free. Fixes: 85b1407 ("ACPI / CPPC: Make CPPC ACPI driver aware of PCC subspace IDs") Signed-off-by: John Garry <[email protected]> Cc: 4.15+ <[email protected]> # 4.15+ Signed-off-by: Rafael J. Wysocki <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

…it() commit 56a0b97 upstream. When enabling KASAN and DEBUG_TEST_DRIVER_REMOVE, I find this KASAN warning: [ 20.872057] BUG: KASAN: use-after-free in pcc_data_alloc+0x40/0xb8 [ 20.878226] Read of size 4 at addr ffff00236cdeb684 by task swapper/0/1 [ 20.884826] [ 20.886309] CPU: 19 PID: 1 Comm: swapper/0 Not tainted 5.4.0-rc1-00009-ge7f7df3db5bf-dirty #289 [ 20.894994] Hardware name: Huawei D06 /D06, BIOS Hisilicon D06 UEFI RC0 - V1.16.01 03/15/2019 [ 20.903505] Call trace: [ 20.905942] dump_backtrace+0x0/0x200 [ 20.909593] show_stack+0x14/0x20 [ 20.912899] dump_stack+0xd4/0x130 [ 20.916291] print_address_description.isra.9+0x6c/0x3b8 [ 20.921592] __kasan_report+0x12c/0x23c [ 20.925417] kasan_report+0xc/0x18 [ 20.928808] __asan_load4+0x94/0xb8 [ 20.932286] pcc_data_alloc+0x40/0xb8 [ 20.935938] acpi_cppc_processor_probe+0x4e8/0xb08 [ 20.940717] __acpi_processor_start+0x48/0xb0 [ 20.945062] acpi_processor_start+0x40/0x60 [ 20.949235] really_probe+0x118/0x548 [ 20.952887] driver_probe_device+0x7c/0x148 [ 20.957059] device_driver_attach+0x94/0xa0 [ 20.961231] __driver_attach+0xa4/0x110 [ 20.965055] bus_for_each_dev+0xe8/0x158 [ 20.968966] driver_attach+0x30/0x40 [ 20.972531] bus_add_driver+0x234/0x2f0 [ 20.976356] driver_register+0xbc/0x1d0 [ 20.980182] acpi_processor_driver_init+0x40/0xe4 [ 20.984875] do_one_initcall+0xb4/0x254 [ 20.988700] kernel_init_freeable+0x24c/0x2f8 [ 20.993047] kernel_init+0x10/0x118 [ 20.996524] ret_from_fork+0x10/0x18 [ 21.000087] [ 21.001567] Allocated by task 1: [ 21.004785] save_stack+0x28/0xc8 [ 21.008089] __kasan_kmalloc.isra.9+0xbc/0xd8 [ 21.012435] kasan_kmalloc+0xc/0x18 [ 21.015913] pcc_data_alloc+0x94/0xb8 [ 21.019564] acpi_cppc_processor_probe+0x4e8/0xb08 [ 21.024343] __acpi_processor_start+0x48/0xb0 [ 21.028689] acpi_processor_start+0x40/0x60 [ 21.032860] really_probe+0x118/0x548 [ 21.036512] driver_probe_device+0x7c/0x148 [ 21.040684] device_driver_attach+0x94/0xa0 [ 21.044855] __driver_attach+0xa4/0x110 [ 21.048680] bus_for_each_dev+0xe8/0x158 [ 21.052591] driver_attach+0x30/0x40 [ 21.056155] bus_add_driver+0x234/0x2f0 [ 21.059980] driver_register+0xbc/0x1d0 [ 21.063805] acpi_processor_driver_init+0x40/0xe4 [ 21.068497] do_one_initcall+0xb4/0x254 [ 21.072322] kernel_init_freeable+0x24c/0x2f8 [ 21.076667] kernel_init+0x10/0x118 [ 21.080144] ret_from_fork+0x10/0x18 [ 21.083707] [ 21.085186] Freed by task 1: [ 21.088056] save_stack+0x28/0xc8 [ 21.091360] __kasan_slab_free+0x118/0x180 [ 21.095445] kasan_slab_free+0x10/0x18 [ 21.099183] kfree+0x80/0x268 [ 21.102139] acpi_cppc_processor_exit+0x1a8/0x1b8 [ 21.106832] acpi_processor_stop+0x70/0x80 [ 21.110917] really_probe+0x174/0x548 [ 21.114568] driver_probe_device+0x7c/0x148 [ 21.118740] device_driver_attach+0x94/0xa0 [ 21.122912] __driver_attach+0xa4/0x110 [ 21.126736] bus_for_each_dev+0xe8/0x158 [ 21.130648] driver_attach+0x30/0x40 [ 21.134212] bus_add_driver+0x234/0x2f0 [ 21.0x10/0x18 [ 21.161764] [ 21.163244] The buggy address belongs to the object at ffff00236cdeb600 [ 21.163244] which belongs to the cache kmalloc-256 of size 256 [ 21.175750] The buggy address is located 132 bytes inside of [ 21.175750] 256-byte region [ffff00236cdeb600, ffff00236cdeb700) [ 21.187473] The buggy address belongs to the page: [ 21.192254] page:fffffe008d937a00 refcount:1 mapcount:0 mapping:ffff002370c0fa00 index:0x0 compound_mapcount: 0 [ 21.202331] flags: 0x1ffff00000010200(slab|head) [ 21.206940] raw: 1ffff00000010200 dead000000000100 dead000000000122 ffff002370c0fa00 [ 21.214671] raw: 0000000000000000 00000000802a002a 00000001ffffffff 0000000000000000 [ 21.222400] page dumped because: kasan: bad access detected [ 21.227959] [ 21.229438] Memory state around the buggy address: [ 21.234218] ffff00236cdeb580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 21.241427] ffff00236cdeb600: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 21.248637] >ffff00236cdeb680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 21.255845] ^ [ 21.259062] ffff00236cdeb700: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 21.266272] ffff00236cdeb780: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 21.273480] ================================================================== It seems that global pcc_data[pcc_ss_id] can be freed in acpi_cppc_processor_exit(), but we may later reference this value, so NULLify it when freed. Also remove the useless setting of data "pcc_channel_acquired", which we're about to free. Fixes: 85b1407 ("ACPI / CPPC: Make CPPC ACPI driver aware of PCC subspace IDs") Signed-off-by: John Garry <[email protected]> Cc: 4.15+ <[email protected]> # 4.15+ Signed-off-by: Rafael J. Wysocki <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

…it() BugLink: https://bugs.launchpad.net/bugs/1850456 commit 56a0b97 upstream. When enabling KASAN and DEBUG_TEST_DRIVER_REMOVE, I find this KASAN warning: [ 20.872057] BUG: KASAN: use-after-free in pcc_data_alloc+0x40/0xb8 [ 20.878226] Read of size 4 at addr ffff00236cdeb684 by task swapper/0/1 [ 20.884826] [ 20.886309] CPU: 19 PID: 1 Comm: swapper/0 Not tainted 5.4.0-rc1-00009-ge7f7df3db5bf-dirty #289 [ 20.894994] Hardware name: Huawei D06 /D06, BIOS Hisilicon D06 UEFI RC0 - V1.16.01 03/15/2019 [ 20.903505] Call trace: [ 20.905942] dump_backtrace+0x0/0x200 [ 20.909593] show_stack+0x14/0x20 [ 20.912899] dump_stack+0xd4/0x130 [ 20.916291] print_address_description.isra.9+0x6c/0x3b8 [ 20.921592] __kasan_report+0x12c/0x23c [ 20.925417] kasan_report+0xc/0x18 [ 20.928808] __asan_load4+0x94/0xb8 [ 20.932286] pcc_data_alloc+0x40/0xb8 [ 20.935938] acpi_cppc_processor_probe+0x4e8/0xb08 [ 20.940717] __acpi_processor_start+0x48/0xb0 [ 20.945062] acpi_processor_start+0x40/0x60 [ 20.949235] really_probe+0x118/0x548 [ 20.952887] driver_probe_device+0x7c/0x148 [ 20.957059] device_driver_attach+0x94/0xa0 [ 20.961231] __driver_attach+0xa4/0x110 [ 20.965055] bus_for_each_dev+0xe8/0x158 [ 20.968966] driver_attach+0x30/0x40 [ 20.972531] bus_add_driver+0x234/0x2f0 [ 20.976356] driver_register+0xbc/0x1d0 [ 20.980182] acpi_processor_driver_init+0x40/0xe4 [ 20.984875] do_one_initcall+0xb4/0x254 [ 20.988700] kernel_init_freeable+0x24c/0x2f8 [ 20.993047] kernel_init+0x10/0x118 [ 20.996524] ret_from_fork+0x10/0x18 [ 21.000087] [ 21.001567] Allocated by task 1: [ 21.004785] save_stack+0x28/0xc8 [ 21.008089] __kasan_kmalloc.isra.9+0xbc/0xd8 [ 21.012435] kasan_kmalloc+0xc/0x18 [ 21.015913] pcc_data_alloc+0x94/0xb8 [ 21.019564] acpi_cppc_processor_probe+0x4e8/0xb08 [ 21.024343] __acpi_processor_start+0x48/0xb0 [ 21.028689] acpi_processor_start+0x40/0x60 [ 21.032860] really_probe+0x118/0x548 [ 21.036512] driver_probe_device+0x7c/0x148 [ 21.040684] device_driver_attach+0x94/0xa0 [ 21.044855] __driver_attach+0xa4/0x110 [ 21.048680] bus_for_each_dev+0xe8/0x158 [ 21.052591] driver_attach+0x30/0x40 [ 21.056155] bus_add_driver+0x234/0x2f0 [ 21.059980] driver_register+0xbc/0x1d0 [ 21.063805] acpi_processor_driver_init+0x40/0xe4 [ 21.068497] do_one_initcall+0xb4/0x254 [ 21.072322] kernel_init_freeable+0x24c/0x2f8 [ 21.076667] kernel_init+0x10/0x118 [ 21.080144] ret_from_fork+0x10/0x18 [ 21.083707] [ 21.085186] Freed by task 1: [ 21.088056] save_stack+0x28/0xc8 [ 21.091360] __kasan_slab_free+0x118/0x180 [ 21.095445] kasan_slab_free+0x10/0x18 [ 21.099183] kfree+0x80/0x268 [ 21.102139] acpi_cppc_processor_exit+0x1a8/0x1b8 [ 21.106832] acpi_processor_stop+0x70/0x80 [ 21.110917] really_probe+0x174/0x548 [ 21.114568] driver_probe_device+0x7c/0x148 [ 21.118740] device_driver_attach+0x94/0xa0 [ 21.122912] __driver_attach+0xa4/0x110 [ 21.126736] bus_for_each_dev+0xe8/0x158 [ 21.130648] driver_attach+0x30/0x40 [ 21.134212] bus_add_driver+0x234/0x2f0 [ 21.0x10/0x18 [ 21.161764] [ 21.163244] The buggy address belongs to the object at ffff00236cdeb600 [ 21.163244] which belongs to the cache kmalloc-256 of size 256 [ 21.175750] The buggy address is located 132 bytes inside of [ 21.175750] 256-byte region [ffff00236cdeb600, ffff00236cdeb700) [ 21.187473] The buggy address belongs to the page: [ 21.192254] page:fffffe008d937a00 refcount:1 mapcount:0 mapping:ffff002370c0fa00 index:0x0 compound_mapcount: 0 [ 21.202331] flags: 0x1ffff00000010200(slab|head) [ 21.206940] raw: 1ffff00000010200 dead000000000100 dead000000000122 ffff002370c0fa00 [ 21.214671] raw: 0000000000000000 00000000802a002a 00000001ffffffff 0000000000000000 [ 21.222400] page dumped because: kasan: bad access detected [ 21.227959] [ 21.229438] Memory state around the buggy address: [ 21.234218] ffff00236cdeb580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 21.241427] ffff00236cdeb600: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 21.248637] >ffff00236cdeb680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 21.255845] ^ [ 21.259062] ffff00236cdeb700: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 21.266272] ffff00236cdeb780: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 21.273480] ================================================================== It seems that global pcc_data[pcc_ss_id] can be freed in acpi_cppc_processor_exit(), but we may later reference this value, so NULLify it when freed. Also remove the useless setting of data "pcc_channel_acquired", which we're about to free. Fixes: 85b1407 ("ACPI / CPPC: Make CPPC ACPI driver aware of PCC subspace IDs") Signed-off-by: John Garry <[email protected]> Cc: 4.15+ <[email protected]> # 4.15+ Signed-off-by: Rafael J. Wysocki <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Connor Kuehl <[email protected]> Signed-off-by: Kleber Sacilotto de Souza <[email protected]>

WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable torvalds#289: FILE: arch/nds32/mm/highmem.c:35: +EXPORT_SYMBOL(kmap_atomic_high); total: 0 errors, 1 warnings, 353 lines checked NOTE: For some of the reported defects, checkpatch may be able to mechanically convert to the typical style using --fix or --fix-inplace. ./patches/arch-kmap_atomic-consolidate-duplicate-code.patch has style problems, please review. NOTE: If any of the errors are false positives, please report them to the maintainer, see CHECKPATCH in MAINTAINERS. Please run checkpatch prior to sending patches Cc: Ira Weiny <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Stephen Rothwell <[email protected]>

The Intel i210 doesn't work if the Expansion ROM BAR overlaps with another BAR. Networking won't work at all and once a packet is sent the netdev watchdog will bite: [ 89.059374] ------------[ cut here ]------------ [ 89.064019] NETDEV WATCHDOG: enP2p1s0 (igb): transmit queue 0 timed out [ 89.070681] WARNING: CPU: 1 PID: 0 at net/sched/sch_generic.c:443 dev_watchdog+0x3a8/0x3b0 [ 89.078989] Modules linked in: [ 89.082053] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G W 5.11.0-rc1-00020-gc16f033804b torvalds#289 [ 89.091574] Hardware name: Kontron SMARC-sAL28 (Single PHY) on SMARC Eval 2.0 carrier (DT) [ 89.099870] pstate: 60000005 (nZCv daif -PAN -UAO -TCO BTYPE=--) [ 89.105900] pc : dev_watchdog+0x3a8/0x3b0 [ 89.109923] lr : dev_watchdog+0x3a8/0x3b0 [ 89.113945] sp : ffff80001000bd50 [ 89.117268] x29: ffff80001000bd50 x28: 0000000000000008 [ 89.122602] x27: 0000000000000004 x26: 0000000000000140 [ 89.127935] x25: ffff002001c6c000 x24: ffff002001c2b940 [ 89.133267] x23: ffff8000118c7000 x22: ffff002001c6c39c [ 89.138600] x21: ffff002001c6bfb8 x20: ffff002001c6c3b8 [ 89.143932] x19: 0000000000000000 x18: 0000000000000010 [ 89.149264] x17: 0000000000000000 x16: 0000000000000000 [ 89.154596] x15: ffffffffffffffff x14: 0720072007200720 [ 89.159928] x13: 0720072007740775 x12: ffff80001195b980 [ 89.165260] x11: 0000000000000003 x10: ffff800011943940 [ 89.170592] x9 : ffff800010100d44 x8 : 0000000000017fe8 [ 89.175924] x7 : c0000000ffffefff x6 : 0000000000000001 [ 89.181255] x5 : 0000000000000000 x4 : 0000000000000000 [ 89.186587] x3 : 00000000ffffffff x2 : ffff8000118eb908 [ 89.191919] x1 : 84d8200845006900 x0 : 0000000000000000 [ 89.197251] Call trace: [ 89.199701] dev_watchdog+0x3a8/0x3b0 [ 89.203374] call_timer_fn+0x38/0x208 [ 89.207049] run_timer_softirq+0x290/0x540 [ 89.211158] __do_softirq+0x138/0x404 [ 89.214831] irq_exit+0xe8/0xf8 [ 89.217981] __handle_domain_irq+0x70/0xc8 [ 89.222091] gic_handle_irq+0xc8/0x2b0 [ 89.225850] el1_irq+0xb8/0x180 [ 89.228999] arch_cpu_idle+0x18/0x40 [ 89.232587] default_idle_call+0x70/0x214 [ 89.236610] do_idle+0x21c/0x290 [ 89.239848] cpu_startup_entry+0x2c/0x70 [ 89.243783] secondary_start_kernel+0x1a0/0x1f0 [ 89.248332] ---[ end trace 1687af62576397bc ]--- [ 89.253350] igb 0002:01:00.0 enP2p1s0: Reset adapter Before this fixup the Expansion ROM BAR will overlap with BAR3: # lspci -ns 2:1:0 -xx 0002:01:00.0 0200: 8086:1533 (rev 03) 00: 86 80 33 15 06 04 10 00 03 00 00 02 08 00 00 00 10: 00 00 00 40 00 00 00 00 00 00 00 00 00 00 20 40 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 03 00 30: 00 00 20 40 40 00 00 00 00 00 00 00 22 01 00 00 Add a quirk which will update the Expansion ROM BAR for Intel i210s even if the ROM is disabled. This was tested on an ARM64 board (kontron sl28). Signed-off-by: Michael Walle <[email protected]>

The Intel i210 doesn't work if the Expansion ROM BAR overlaps with another BAR. Networking won't work at all and once a packet is sent the netdev watchdog will bite: [ 89.059374] ------------[ cut here ]------------ [ 89.064019] NETDEV WATCHDOG: enP2p1s0 (igb): transmit queue 0 timed out [ 89.070681] WARNING: CPU: 1 PID: 0 at net/sched/sch_generic.c:443 dev_watchdog+0x3a8/0x3b0 [ 89.078989] Modules linked in: [ 89.082053] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G W 5.11.0-rc1-00020-gc16f033804b torvalds#289 [ 89.091574] Hardware name: Kontron SMARC-sAL28 (Single PHY) on SMARC Eval 2.0 carrier (DT) [ 89.099870] pstate: 60000005 (nZCv daif -PAN -UAO -TCO BTYPE=--) [ 89.105900] pc : dev_watchdog+0x3a8/0x3b0 [ 89.109923] lr : dev_watchdog+0x3a8/0x3b0 [ 89.113945] sp : ffff80001000bd50 [ 89.117268] x29: ffff80001000bd50 x28: 0000000000000008 [ 89.122602] x27: 0000000000000004 x26: 0000000000000140 [ 89.127935] x25: ffff002001c6c000 x24: ffff002001c2b940 [ 89.133267] x23: ffff8000118c7000 x22: ffff002001c6c39c [ 89.138600] x21: ffff002001c6bfb8 x20: ffff002001c6c3b8 [ 89.143932] x19: 0000000000000000 x18: 0000000000000010 [ 89.149264] x17: 0000000000000000 x16: 0000000000000000 [ 89.154596] x15: ffffffffffffffff x14: 0720072007200720 [ 89.159928] x13: 0720072007740775 x12: ffff80001195b980 [ 89.165260] x11: 0000000000000003 x10: ffff800011943940 [ 89.170592] x9 : ffff800010100d44 x8 : 0000000000017fe8 [ 89.175924] x7 : c0000000ffffefff x6 : 0000000000000001 [ 89.181255] x5 : 0000000000000000 x4 : 0000000000000000 [ 89.186587] x3 : 00000000ffffffff x2 : ffff8000118eb908 [ 89.191919] x1 : 84d8200845006900 x0 : 0000000000000000 [ 89.197251] Call trace: [ 89.199701] dev_watchdog+0x3a8/0x3b0 [ 89.203374] call_timer_fn+0x38/0x208 [ 89.207049] run_timer_softirq+0x290/0x540 [ 89.211158] __do_softirq+0x138/0x404 [ 89.214831] irq_exit+0xe8/0xf8 [ 89.217981] __handle_domain_irq+0x70/0xc8 [ 89.222091] gic_handle_irq+0xc8/0x2b0 [ 89.225850] el1_irq+0xb8/0x180 [ 89.228999] arch_cpu_idle+0x18/0x40 [ 89.232587] default_idle_call+0x70/0x214 [ 89.236610] do_idle+0x21c/0x290 [ 89.239848] cpu_startup_entry+0x2c/0x70 [ 89.243783] secondary_start_kernel+0x1a0/0x1f0 [ 89.248332] ---[ end trace 1687af62576397bc ]--- [ 89.253350] igb 0002:01:00.0 enP2p1s0: Reset adapter Before this fixup the Expansion ROM BAR will overlap with BAR3: # lspci -ns 2:1:0 -xx 0002:01:00.0 0200: 8086:1533 (rev 03) 00: 86 80 33 15 06 04 10 00 03 00 00 02 08 00 00 00 10: 00 00 00 40 00 00 00 00 00 00 00 00 00 00 20 40 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 03 00 30: 00 00 20 40 40 00 00 00 00 00 00 00 22 01 00 00 Add a quirk which will update the Expansion ROM BAR for Intel i210s even if the ROM is disabled. After the quirk is applied: # lspci -ns 2:1:0 -xx 0002:01:00.0 0200: 8086:1533 (rev 03) 00: 86 80 33 15 06 04 10 00 03 00 00 02 08 00 00 00 10: 00 00 00 40 00 00 00 00 00 00 00 00 00 00 20 40 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 03 00 30: 00 00 10 40 40 00 00 00 00 00 00 00 22 01 00 00 This behavior was seen with U-Boot v2021.01-rc3 on an ARM64 board (kontron sl28). Earlier versions likely behave in the same way, but the board which this was tested on, is only supported since the 2021.01 version. Signed-off-by: Michael Walle <[email protected]>

This commit fixes the following checkpatch.pl errors: ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#285: FILE: ./hal/odm.c:285: +void odm_CommonInfoSelfInit(struct DM_ODM_T * pDM_Odm); ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#287: FILE: ./hal/odm.c:287: +void odm_CommonInfoSelfUpdate(struct DM_ODM_T * pDM_Odm); ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#289: FILE: ./hal/odm.c:289: +void odm_CmnInfoInit_Debug(struct DM_ODM_T * pDM_Odm); ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#291: FILE: ./hal/odm.c:291: +void odm_BasicDbgMessage(struct DM_ODM_T * pDM_Odm); ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#305: FILE: ./hal/odm.c:305: +void odm_RefreshRateAdaptiveMaskCE(struct DM_ODM_T * pDM_Odm); ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#309: FILE: ./hal/odm.c:309: +void odm_RSSIMonitorInit(struct DM_ODM_T * pDM_Odm); ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#311: FILE: ./hal/odm.c:311: +void odm_RSSIMonitorCheckCE(struct DM_ODM_T * pDM_Odm); ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#313: FILE: ./hal/odm.c:313: +void odm_RSSIMonitorCheck(struct DM_ODM_T * pDM_Odm); ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#315: FILE: ./hal/odm.c:315: +void odm_SwAntDetectInit(struct DM_ODM_T * pDM_Odm); ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#323: FILE: ./hal/odm.c:323: +void odm_RefreshRateAdaptiveMask(struct DM_ODM_T * pDM_Odm); ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#325: FILE: ./hal/odm.c:325: +void ODM_TXPowerTrackingCheck(struct DM_ODM_T * pDM_Odm); ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#327: FILE: ./hal/odm.c:327: +void odm_RateAdaptiveMaskInit(struct DM_ODM_T * pDM_Odm); ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#330: FILE: ./hal/odm.c:330: +void odm_TXPowerTrackingInit(struct DM_ODM_T * pDM_Odm); ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#338: FILE: ./hal/odm.c:338: +void odm_InitHybridAntDiv(struct DM_ODM_T * pDM_Odm); ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#341: FILE: ./hal/odm.c:341: + struct DM_ODM_T * pDM_Odm, ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#349: FILE: ./hal/odm.c:349: +void odm_SetRxIdleAnt(struct DM_ODM_T * pDM_Odm, u8 Ant, bool bDualPath); ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#353: FILE: ./hal/odm.c:353: +void odm_HwAntDiv(struct DM_ODM_T * pDM_Odm); ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#363: FILE: ./hal/odm.c:363: +void ODM_DMInit(struct DM_ODM_T * pDM_Odm) ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#393: FILE: ./hal/odm.c:393: +void ODM_DMWatchdog(struct DM_ODM_T * pDM_Odm) ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#420: FILE: ./hal/odm.c:420: + struct DIG_T * pDM_DigTable = &pDM_Odm->DM_DigTable; ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#448: FILE: ./hal/odm.c:448: +void ODM_CmnInfoInit(struct DM_ODM_T * pDM_Odm, enum ODM_CMNINFO_E CmnInfo, u32 Value) ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#560: FILE: ./hal/odm.c:560: +void ODM_CmnInfoHook(struct DM_ODM_T * pDM_Odm, enum ODM_CMNINFO_E CmnInfo, void *pValue) ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#689: FILE: ./hal/odm.c:689: + struct DM_ODM_T * pDM_Odm, ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#717: FILE: ./hal/odm.c:717: +void ODM_CmnInfoUpdate(struct DM_ODM_T * pDM_Odm, u32 CmnInfo, u64 Value) ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#831: FILE: ./hal/odm.c:831: +void odm_CommonInfoSelfInit(struct DM_ODM_T * pDM_Odm) ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#841: FILE: ./hal/odm.c:841: +void odm_CommonInfoSelfUpdate(struct DM_ODM_T * pDM_Odm) ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#867: FILE: ./hal/odm.c:867: +void odm_CmnInfoInit_Debug(struct DM_ODM_T * pDM_Odm) ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#888: FILE: ./hal/odm.c:888: +void odm_BasicDbgMessage(struct DM_ODM_T * pDM_Odm) ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#935: FILE: ./hal/odm.c:935: +void odm_RateAdaptiveMaskInit(struct DM_ODM_T * pDM_Odm) ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#937: FILE: ./hal/odm.c:937: + struct ODM_RATE_ADAPTIVE * pOdmRA = &pDM_Odm->RateAdaptive; ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#953: FILE: ./hal/odm.c:953: + struct DM_ODM_T * pDM_Odm, ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#1083: FILE: ./hal/odm.c:1083: +void odm_RefreshRateAdaptiveMask(struct DM_ODM_T * pDM_Odm) ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#1094: FILE: ./hal/odm.c:1094: +void odm_RefreshRateAdaptiveMaskCE(struct DM_ODM_T * pDM_Odm) ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #1131: FILE: ./hal/odm.c:1131: + struct DM_ODM_T * pDM_Odm, ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #1137: FILE: ./hal/odm.c:1137: + struct ODM_RATE_ADAPTIVE * pRA = &pDM_Odm->RateAdaptive; ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #1196: FILE: ./hal/odm.c:1196: +void odm_RSSIMonitorInit(struct DM_ODM_T * pDM_Odm) ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #1198: FILE: ./hal/odm.c:1198: + struct RA_T * pRA_Table = &pDM_Odm->DM_RA_Table; ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #1204: FILE: ./hal/odm.c:1204: +void odm_RSSIMonitorCheck(struct DM_ODM_T * pDM_Odm) ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #1217: FILE: ./hal/odm.c:1217: + struct DM_ODM_T * pDM_Odm = &(pHalData->odmpriv); ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #1234: FILE: ./hal/odm.c:1234: +void odm_RSSIMonitorCheckCE(struct DM_ODM_T * pDM_Odm) ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #1243: FILE: ./hal/odm.c:1243: + struct RA_T * pRA_Table = &pDM_Odm->DM_RA_Table; ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #1306: FILE: ./hal/odm.c:1306: +static u8 getSwingIndex(struct DM_ODM_T * pDM_Odm) ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #1330: FILE: ./hal/odm.c:1330: +void odm_TXPowerTrackingInit(struct DM_ODM_T * pDM_Odm) ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #1374: FILE: ./hal/odm.c:1374: +void ODM_TXPowerTrackingCheck(struct DM_ODM_T * pDM_Odm) ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #1398: FILE: ./hal/odm.c:1398: +void odm_SwAntDetectInit(struct DM_ODM_T * pDM_Odm) ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #1400: FILE: ./hal/odm.c:1400: + struct SWAT_T * pDM_SWAT_Table = &pDM_Odm->DM_SWAT_Table; Signed-off-by: Marco Cesati <[email protected]>

This commit fixes the following checkpatch.pl errors: ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#285: FILE: ./hal/odm.c:285: +void odm_CommonInfoSelfInit(struct DM_ODM_T * pDM_Odm); ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#287: FILE: ./hal/odm.c:287: +void odm_CommonInfoSelfUpdate(struct DM_ODM_T * pDM_Odm); ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#289: FILE: ./hal/odm.c:289: +void odm_CmnInfoInit_Debug(struct DM_ODM_T * pDM_Odm); ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#291: FILE: ./hal/odm.c:291: +void odm_BasicDbgMessage(struct DM_ODM_T * pDM_Odm); ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#305: FILE: ./hal/odm.c:305: +void odm_RefreshRateAdaptiveMaskCE(struct DM_ODM_T * pDM_Odm); ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#309: FILE: ./hal/odm.c:309: +void odm_RSSIMonitorInit(struct DM_ODM_T * pDM_Odm); ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#311: FILE: ./hal/odm.c:311: +void odm_RSSIMonitorCheckCE(struct DM_ODM_T * pDM_Odm); ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#313: FILE: ./hal/odm.c:313: +void odm_RSSIMonitorCheck(struct DM_ODM_T * pDM_Odm); ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#315: FILE: ./hal/odm.c:315: +void odm_SwAntDetectInit(struct DM_ODM_T * pDM_Odm); ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#323: FILE: ./hal/odm.c:323: +void odm_RefreshRateAdaptiveMask(struct DM_ODM_T * pDM_Odm); ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#325: FILE: ./hal/odm.c:325: +void ODM_TXPowerTrackingCheck(struct DM_ODM_T * pDM_Odm); ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#327: FILE: ./hal/odm.c:327: +void odm_RateAdaptiveMaskInit(struct DM_ODM_T * pDM_Odm); ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#330: FILE: ./hal/odm.c:330: +void odm_TXPowerTrackingInit(struct DM_ODM_T * pDM_Odm); ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#338: FILE: ./hal/odm.c:338: +void odm_InitHybridAntDiv(struct DM_ODM_T * pDM_Odm); ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#341: FILE: ./hal/odm.c:341: + struct DM_ODM_T * pDM_Odm, ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#349: FILE: ./hal/odm.c:349: +void odm_SetRxIdleAnt(struct DM_ODM_T * pDM_Odm, u8 Ant, bool bDualPath); ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#353: FILE: ./hal/odm.c:353: +void odm_HwAntDiv(struct DM_ODM_T * pDM_Odm); ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#363: FILE: ./hal/odm.c:363: +void ODM_DMInit(struct DM_ODM_T * pDM_Odm) ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#393: FILE: ./hal/odm.c:393: +void ODM_DMWatchdog(struct DM_ODM_T * pDM_Odm) ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#420: FILE: ./hal/odm.c:420: + struct DIG_T * pDM_DigTable = &pDM_Odm->DM_DigTable; ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#448: FILE: ./hal/odm.c:448: +void ODM_CmnInfoInit(struct DM_ODM_T * pDM_Odm, enum ODM_CMNINFO_E CmnInfo, u32 Value) ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#560: FILE: ./hal/odm.c:560: +void ODM_CmnInfoHook(struct DM_ODM_T * pDM_Odm, enum ODM_CMNINFO_E CmnInfo, void *pValue) ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#689: FILE: ./hal/odm.c:689: + struct DM_ODM_T * pDM_Odm, ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#717: FILE: ./hal/odm.c:717: +void ODM_CmnInfoUpdate(struct DM_ODM_T * pDM_Odm, u32 CmnInfo, u64 Value) ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#831: FILE: ./hal/odm.c:831: +void odm_CommonInfoSelfInit(struct DM_ODM_T * pDM_Odm) ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#841: FILE: ./hal/odm.c:841: +void odm_CommonInfoSelfUpdate(struct DM_ODM_T * pDM_Odm) ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#867: FILE: ./hal/odm.c:867: +void odm_CmnInfoInit_Debug(struct DM_ODM_T * pDM_Odm) ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#888: FILE: ./hal/odm.c:888: +void odm_BasicDbgMessage(struct DM_ODM_T * pDM_Odm) ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#935: FILE: ./hal/odm.c:935: +void odm_RateAdaptiveMaskInit(struct DM_ODM_T * pDM_Odm) ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#937: FILE: ./hal/odm.c:937: + struct ODM_RATE_ADAPTIVE * pOdmRA = &pDM_Odm->RateAdaptive; ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#953: FILE: ./hal/odm.c:953: + struct DM_ODM_T * pDM_Odm, ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#1083: FILE: ./hal/odm.c:1083: +void odm_RefreshRateAdaptiveMask(struct DM_ODM_T * pDM_Odm) ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#1094: FILE: ./hal/odm.c:1094: +void odm_RefreshRateAdaptiveMaskCE(struct DM_ODM_T * pDM_Odm) ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #1131: FILE: ./hal/odm.c:1131: + struct DM_ODM_T * pDM_Odm, ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #1137: FILE: ./hal/odm.c:1137: + struct ODM_RATE_ADAPTIVE * pRA = &pDM_Odm->RateAdaptive; ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #1196: FILE: ./hal/odm.c:1196: +void odm_RSSIMonitorInit(struct DM_ODM_T * pDM_Odm) ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #1198: FILE: ./hal/odm.c:1198: + struct RA_T * pRA_Table = &pDM_Odm->DM_RA_Table; ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #1204: FILE: ./hal/odm.c:1204: +void odm_RSSIMonitorCheck(struct DM_ODM_T * pDM_Odm) ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #1217: FILE: ./hal/odm.c:1217: + struct DM_ODM_T * pDM_Odm = &(pHalData->odmpriv); ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #1234: FILE: ./hal/odm.c:1234: +void odm_RSSIMonitorCheckCE(struct DM_ODM_T * pDM_Odm) ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #1243: FILE: ./hal/odm.c:1243: + struct RA_T * pRA_Table = &pDM_Odm->DM_RA_Table; ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #1306: FILE: ./hal/odm.c:1306: +static u8 getSwingIndex(struct DM_ODM_T * pDM_Odm) ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #1330: FILE: ./hal/odm.c:1330: +void odm_TXPowerTrackingInit(struct DM_ODM_T * pDM_Odm) ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #1374: FILE: ./hal/odm.c:1374: +void ODM_TXPowerTrackingCheck(struct DM_ODM_T * pDM_Odm) ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #1398: FILE: ./hal/odm.c:1398: +void odm_SwAntDetectInit(struct DM_ODM_T * pDM_Odm) ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #1400: FILE: ./hal/odm.c:1400: + struct SWAT_T * pDM_SWAT_Table = &pDM_Odm->DM_SWAT_Table; Reviewed-by: Dan Carpenter <[email protected]> Signed-off-by: Marco Cesati <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>

rust: make SharedState::try_new() return a pinned Arc

WARNING: please, no spaces at the start of a line torvalds#249: FILE: mm/page-writeback.c:2089: + {$ ERROR: code indent should use tabs where possible torvalds#250: FILE: mm/page-writeback.c:2090: + .procname = "dirty_background_ratio",$ WARNING: please, no spaces at the start of a line torvalds#250: FILE: mm/page-writeback.c:2090: + .procname = "dirty_background_ratio",$ ERROR: code indent should use tabs where possible torvalds#251: FILE: mm/page-writeback.c:2091: + .data = &dirty_background_ratio,$ WARNING: please, no spaces at the start of a line torvalds#251: FILE: mm/page-writeback.c:2091: + .data = &dirty_background_ratio,$ ERROR: code indent should use tabs where possible torvalds#252: FILE: mm/page-writeback.c:2092: + .maxlen = sizeof(dirty_background_ratio),$ WARNING: please, no spaces at the start of a line torvalds#252: FILE: mm/page-writeback.c:2092: + .maxlen = sizeof(dirty_background_ratio),$ ERROR: code indent should use tabs where possible torvalds#253: FILE: mm/page-writeback.c:2093: + .mode = 0644,$ WARNING: please, no spaces at the start of a line torvalds#253: FILE: mm/page-writeback.c:2093: + .mode = 0644,$ ERROR: code indent should use tabs where possible torvalds#254: FILE: mm/page-writeback.c:2094: + .proc_handler = dirty_background_ratio_handler,$ WARNING: please, no spaces at the start of a line torvalds#254: FILE: mm/page-writeback.c:2094: + .proc_handler = dirty_background_ratio_handler,$ ERROR: code indent should use tabs where possible torvalds#255: FILE: mm/page-writeback.c:2095: + .extra1 = SYSCTL_ZERO,$ WARNING: please, no spaces at the start of a line torvalds#255: FILE: mm/page-writeback.c:2095: + .extra1 = SYSCTL_ZERO,$ ERROR: code indent should use tabs where possible torvalds#256: FILE: mm/page-writeback.c:2096: + .extra2 = SYSCTL_ONE_HUNDRED,$ WARNING: please, no spaces at the start of a line torvalds#256: FILE: mm/page-writeback.c:2096: + .extra2 = SYSCTL_ONE_HUNDRED,$ WARNING: please, no spaces at the start of a line torvalds#257: FILE: mm/page-writeback.c:2097: + },$ WARNING: please, no spaces at the start of a line torvalds#258: FILE: mm/page-writeback.c:2098: + {$ ERROR: code indent should use tabs where possible torvalds#259: FILE: mm/page-writeback.c:2099: + .procname = "dirty_background_bytes",$ WARNING: please, no spaces at the start of a line torvalds#259: FILE: mm/page-writeback.c:2099: + .procname = "dirty_background_bytes",$ ERROR: code indent should use tabs where possible torvalds#260: FILE: mm/page-writeback.c:2100: + .data = &dirty_background_bytes,$ WARNING: please, no spaces at the start of a line torvalds#260: FILE: mm/page-writeback.c:2100: + .data = &dirty_background_bytes,$ ERROR: code indent should use tabs where possible torvalds#261: FILE: mm/page-writeback.c:2101: + .maxlen = sizeof(dirty_background_bytes),$ WARNING: please, no spaces at the start of a line torvalds#261: FILE: mm/page-writeback.c:2101: + .maxlen = sizeof(dirty_background_bytes),$ ERROR: code indent should use tabs where possible torvalds#262: FILE: mm/page-writeback.c:2102: + .mode = 0644,$ WARNING: please, no spaces at the start of a line torvalds#262: FILE: mm/page-writeback.c:2102: + .mode = 0644,$ ERROR: code indent should use tabs where possible torvalds#263: FILE: mm/page-writeback.c:2103: + .proc_handler = dirty_background_bytes_handler,$ WARNING: please, no spaces at the start of a line torvalds#263: FILE: mm/page-writeback.c:2103: + .proc_handler = dirty_background_bytes_handler,$ ERROR: code indent should use tabs where possible torvalds#264: FILE: mm/page-writeback.c:2104: + .extra1 = SYSCTL_LONG_ONE,$ WARNING: please, no spaces at the start of a line torvalds#264: FILE: mm/page-writeback.c:2104: + .extra1 = SYSCTL_LONG_ONE,$ WARNING: please, no spaces at the start of a line torvalds#265: FILE: mm/page-writeback.c:2105: + },$ WARNING: please, no spaces at the start of a line torvalds#266: FILE: mm/page-writeback.c:2106: + {$ ERROR: code indent should use tabs where possible torvalds#267: FILE: mm/page-writeback.c:2107: + .procname = "dirty_ratio",$ WARNING: please, no spaces at the start of a line torvalds#267: FILE: mm/page-writeback.c:2107: + .procname = "dirty_ratio",$ ERROR: code indent should use tabs where possible torvalds#268: FILE: mm/page-writeback.c:2108: + .data = &vm_dirty_ratio,$ WARNING: please, no spaces at the start of a line torvalds#268: FILE: mm/page-writeback.c:2108: + .data = &vm_dirty_ratio,$ ERROR: code indent should use tabs where possible torvalds#269: FILE: mm/page-writeback.c:2109: + .maxlen = sizeof(vm_dirty_ratio),$ WARNING: please, no spaces at the start of a line torvalds#269: FILE: mm/page-writeback.c:2109: + .maxlen = sizeof(vm_dirty_ratio),$ ERROR: code indent should use tabs where possible torvalds#270: FILE: mm/page-writeback.c:2110: + .mode = 0644,$ WARNING: please, no spaces at the start of a line torvalds#270: FILE: mm/page-writeback.c:2110: + .mode = 0644,$ ERROR: code indent should use tabs where possible torvalds#271: FILE: mm/page-writeback.c:2111: + .proc_handler = dirty_ratio_handler,$ WARNING: please, no spaces at the start of a line torvalds#271: FILE: mm/page-writeback.c:2111: + .proc_handler = dirty_ratio_handler,$ ERROR: code indent should use tabs where possible torvalds#272: FILE: mm/page-writeback.c:2112: + .extra1 = SYSCTL_ZERO,$ WARNING: please, no spaces at the start of a line torvalds#272: FILE: mm/page-writeback.c:2112: + .extra1 = SYSCTL_ZERO,$ ERROR: code indent should use tabs where possible torvalds#273: FILE: mm/page-writeback.c:2113: + .extra2 = SYSCTL_ONE_HUNDRED,$ WARNING: please, no spaces at the start of a line torvalds#273: FILE: mm/page-writeback.c:2113: + .extra2 = SYSCTL_ONE_HUNDRED,$ WARNING: please, no spaces at the start of a line torvalds#274: FILE: mm/page-writeback.c:2114: + },$ WARNING: please, no spaces at the start of a line torvalds#275: FILE: mm/page-writeback.c:2115: + {$ ERROR: code indent should use tabs where possible torvalds#276: FILE: mm/page-writeback.c:2116: + .procname = "dirty_bytes",$ WARNING: please, no spaces at the start of a line torvalds#276: FILE: mm/page-writeback.c:2116: + .procname = "dirty_bytes",$ ERROR: code indent should use tabs where possible torvalds#277: FILE: mm/page-writeback.c:2117: + .data = &vm_dirty_bytes,$ WARNING: please, no spaces at the start of a line torvalds#277: FILE: mm/page-writeback.c:2117: + .data = &vm_dirty_bytes,$ ERROR: code indent should use tabs where possible torvalds#278: FILE: mm/page-writeback.c:2118: + .maxlen = sizeof(vm_dirty_bytes),$ WARNING: please, no spaces at the start of a line torvalds#278: FILE: mm/page-writeback.c:2118: + .maxlen = sizeof(vm_dirty_bytes),$ ERROR: code indent should use tabs where possible torvalds#279: FILE: mm/page-writeback.c:2119: + .mode = 0644,$ WARNING: please, no spaces at the start of a line torvalds#279: FILE: mm/page-writeback.c:2119: + .mode = 0644,$ ERROR: code indent should use tabs where possible torvalds#280: FILE: mm/page-writeback.c:2120: + .proc_handler = dirty_bytes_handler,$ WARNING: please, no spaces at the start of a line torvalds#280: FILE: mm/page-writeback.c:2120: + .proc_handler = dirty_bytes_handler,$ ERROR: code indent should use tabs where possible torvalds#281: FILE: mm/page-writeback.c:2121: + .extra1 = (void *)&dirty_bytes_min,$ WARNING: please, no spaces at the start of a line torvalds#281: FILE: mm/page-writeback.c:2121: + .extra1 = (void *)&dirty_bytes_min,$ WARNING: please, no spaces at the start of a line torvalds#282: FILE: mm/page-writeback.c:2122: + },$ WARNING: please, no spaces at the start of a line torvalds#283: FILE: mm/page-writeback.c:2123: + {$ ERROR: code indent should use tabs where possible torvalds#284: FILE: mm/page-writeback.c:2124: + .procname = "dirty_writeback_centisecs",$ WARNING: please, no spaces at the start of a line torvalds#284: FILE: mm/page-writeback.c:2124: + .procname = "dirty_writeback_centisecs",$ ERROR: code indent should use tabs where possible torvalds#285: FILE: mm/page-writeback.c:2125: + .data = &dirty_writeback_interval,$ WARNING: please, no spaces at the start of a line torvalds#285: FILE: mm/page-writeback.c:2125: + .data = &dirty_writeback_interval,$ ERROR: code indent should use tabs where possible torvalds#286: FILE: mm/page-writeback.c:2126: + .maxlen = sizeof(dirty_writeback_interval),$ WARNING: please, no spaces at the start of a line torvalds#286: FILE: mm/page-writeback.c:2126: + .maxlen = sizeof(dirty_writeback_interval),$ ERROR: code indent should use tabs where possible torvalds#287: FILE: mm/page-writeback.c:2127: + .mode = 0644,$ WARNING: please, no spaces at the start of a line torvalds#287: FILE: mm/page-writeback.c:2127: + .mode = 0644,$ ERROR: code indent should use tabs where possible torvalds#288: FILE: mm/page-writeback.c:2128: + .proc_handler = dirty_writeback_centisecs_handler,$ WARNING: please, no spaces at the start of a line torvalds#288: FILE: mm/page-writeback.c:2128: + .proc_handler = dirty_writeback_centisecs_handler,$ WARNING: please, no spaces at the start of a line torvalds#289: FILE: mm/page-writeback.c:2129: + },$ WARNING: please, no spaces at the start of a line torvalds#290: FILE: mm/page-writeback.c:2130: + {$ ERROR: code indent should use tabs where possible torvalds#291: FILE: mm/page-writeback.c:2131: + .procname = "dirty_expire_centisecs",$ WARNING: please, no spaces at the start of a line torvalds#291: FILE: mm/page-writeback.c:2131: + .procname = "dirty_expire_centisecs",$ ERROR: code indent should use tabs where possible torvalds#292: FILE: mm/page-writeback.c:2132: + .data = &dirty_expire_interval,$ WARNING: please, no spaces at the start of a line torvalds#292: FILE: mm/page-writeback.c:2132: + .data = &dirty_expire_interval,$ ERROR: code indent should use tabs where possible torvalds#293: FILE: mm/page-writeback.c:2133: + .maxlen = sizeof(dirty_expire_interval),$ WARNING: please, no spaces at the start of a line torvalds#293: FILE: mm/page-writeback.c:2133: + .maxlen = sizeof(dirty_expire_interval),$ ERROR: code indent should use tabs where possible torvalds#294: FILE: mm/page-writeback.c:2134: + .mode = 0644,$ WARNING: please, no spaces at the start of a line torvalds#294: FILE: mm/page-writeback.c:2134: + .mode = 0644,$ ERROR: code indent should use tabs where possible torvalds#295: FILE: mm/page-writeback.c:2135: + .proc_handler = proc_dointvec_minmax,$ WARNING: please, no spaces at the start of a line torvalds#295: FILE: mm/page-writeback.c:2135: + .proc_handler = proc_dointvec_minmax,$ ERROR: code indent should use tabs where possible torvalds#296: FILE: mm/page-writeback.c:2136: + .extra1 = SYSCTL_ZERO,$ WARNING: please, no spaces at the start of a line torvalds#296: FILE: mm/page-writeback.c:2136: + .extra1 = SYSCTL_ZERO,$ WARNING: please, no spaces at the start of a line torvalds#297: FILE: mm/page-writeback.c:2137: + },$ total: 37 errors, 49 warnings, 287 lines checked NOTE: For some of the reported defects, checkpatch may be able to mechanically convert to the typical style using --fix or --fix-inplace. NOTE: Whitespace errors detected. You may wish to use scripts/cleanpatch or scripts/cleanfile ./patches/mm-move-page-writeback-sysctls-to-is-own-file.patch has style problems, please review. NOTE: If any of the errors are false positives, please report them to the maintainer, see CHECKPATCH in MAINTAINERS. Please run checkpatch prior to sending patches Cc: Iurii Zaikin <[email protected]> Cc: Kees Cook <[email protected]> Cc: Luis Chamberlain <[email protected]> Cc: zhanglianjie <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Stephen Rothwell <[email protected]>

WARNING: please, no spaces at the start of a line torvalds#249: FILE: mm/page-writeback.c:2089: + {$ ERROR: code indent should use tabs where possible torvalds#250: FILE: mm/page-writeback.c:2090: + .procname = "dirty_background_ratio",$ WARNING: please, no spaces at the start of a line torvalds#250: FILE: mm/page-writeback.c:2090: + .procname = "dirty_background_ratio",$ ERROR: code indent should use tabs where possible torvalds#251: FILE: mm/page-writeback.c:2091: + .data = &dirty_background_ratio,$ WARNING: please, no spaces at the start of a line torvalds#251: FILE: mm/page-writeback.c:2091: + .data = &dirty_background_ratio,$ ERROR: code indent should use tabs where possible torvalds#252: FILE: mm/page-writeback.c:2092: + .maxlen = sizeof(dirty_background_ratio),$ WARNING: please, no spaces at the start of a line torvalds#252: FILE: mm/page-writeback.c:2092: + .maxlen = sizeof(dirty_background_ratio),$ ERROR: code indent should use tabs where possible torvalds#253: FILE: mm/page-writeback.c:2093: + .mode = 0644,$ WARNING: please, no spaces at the start of a line torvalds#253: FILE: mm/page-writeback.c:2093: + .mode = 0644,$ ERROR: code indent should use tabs where possible torvalds#254: FILE: mm/page-writeback.c:2094: + .proc_handler = dirty_background_ratio_handler,$ WARNING: please, no spaces at the start of a line torvalds#254: FILE: mm/page-writeback.c:2094: + .proc_handler = dirty_background_ratio_handler,$ ERROR: code indent should use tabs where possible torvalds#255: FILE: mm/page-writeback.c:2095: + .extra1 = SYSCTL_ZERO,$ WARNING: please, no spaces at the start of a line torvalds#255: FILE: mm/page-writeback.c:2095: + .extra1 = SYSCTL_ZERO,$ ERROR: code indent should use tabs where possible torvalds#256: FILE: mm/page-writeback.c:2096: + .extra2 = SYSCTL_ONE_HUNDRED,$ WARNING: please, no spaces at the start of a line torvalds#256: FILE: mm/page-writeback.c:2096: + .extra2 = SYSCTL_ONE_HUNDRED,$ WARNING: please, no spaces at the start of a line torvalds#257: FILE: mm/page-writeback.c:2097: + },$ WARNING: please, no spaces at the start of a line torvalds#258: FILE: mm/page-writeback.c:2098: + {$ ERROR: code indent should use tabs where possible torvalds#259: FILE: mm/page-writeback.c:2099: + .procname = "dirty_background_bytes",$ WARNING: please, no spaces at the start of a line torvalds#259: FILE: mm/page-writeback.c:2099: + .procname = "dirty_background_bytes",$ ERROR: code indent should use tabs where possible torvalds#260: FILE: mm/page-writeback.c:2100: + .data = &dirty_background_bytes,$ WARNING: please, no spaces at the start of a line torvalds#260: FILE: mm/page-writeback.c:2100: + .data = &dirty_background_bytes,$ ERROR: code indent should use tabs where possible torvalds#261: FILE: mm/page-writeback.c:2101: + .maxlen = sizeof(dirty_background_bytes),$ WARNING: please, no spaces at the start of a line torvalds#261: FILE: mm/page-writeback.c:2101: + .maxlen = sizeof(dirty_background_bytes),$ ERROR: code indent should use tabs where possible torvalds#262: FILE: mm/page-writeback.c:2102: + .mode = 0644,$ WARNING: please, no spaces at the start of a line torvalds#262: FILE: mm/page-writeback.c:2102: + .mode = 0644,$ ERROR: code indent should use tabs where possible torvalds#263: FILE: mm/page-writeback.c:2103: + .proc_handler = dirty_background_bytes_handler,$ WARNING: please, no spaces at the start of a line torvalds#263: FILE: mm/page-writeback.c:2103: + .proc_handler = dirty_background_bytes_handler,$ ERROR: code indent should use tabs where possible torvalds#264: FILE: mm/page-writeback.c:2104: + .extra1 = SYSCTL_LONG_ONE,$ WARNING: please, no spaces at the start of a line torvalds#264: FILE: mm/page-writeback.c:2104: + .extra1 = SYSCTL_LONG_ONE,$ WARNING: please, no spaces at the start of a line torvalds#265: FILE: mm/page-writeback.c:2105: + },$ WARNING: please, no spaces at the start of a line torvalds#266: FILE: mm/page-writeback.c:2106: + {$ ERROR: code indent should use tabs where possible torvalds#267: FILE: mm/page-writeback.c:2107: + .procname = "dirty_ratio",$ WARNING: please, no spaces at the start of a line torvalds#267: FILE: mm/page-writeback.c:2107: + .procname = "dirty_ratio",$ ERROR: code indent should use tabs where possible torvalds#268: FILE: mm/page-writeback.c:2108: + .data = &vm_dirty_ratio,$ WARNING: please, no spaces at the start of a line torvalds#268: FILE: mm/page-writeback.c:2108: + .data = &vm_dirty_ratio,$ ERROR: code indent should use tabs where possible torvalds#269: FILE: mm/page-writeback.c:2109: + .maxlen = sizeof(vm_dirty_ratio),$ WARNING: please, no spaces at the start of a line torvalds#269: FILE: mm/page-writeback.c:2109: + .maxlen = sizeof(vm_dirty_ratio),$ ERROR: code indent should use tabs where possible torvalds#270: FILE: mm/page-writeback.c:2110: + .mode = 0644,$ WARNING: please, no spaces at the start of a line torvalds#270: FILE: mm/page-writeback.c:2110: + .mode = 0644,$ ERROR: code indent should use tabs where possible torvalds#271: FILE: mm/page-writeback.c:2111: + .proc_handler = dirty_ratio_handler,$ WARNING: please, no spaces at the start of a line torvalds#271: FILE: mm/page-writeback.c:2111: + .proc_handler = dirty_ratio_handler,$ ERROR: code indent should use tabs where possible torvalds#272: FILE: mm/page-writeback.c:2112: + .extra1 = SYSCTL_ZERO,$ WARNING: please, no spaces at the start of a line torvalds#272: FILE: mm/page-writeback.c:2112: + .extra1 = SYSCTL_ZERO,$ ERROR: code indent should use tabs where possible torvalds#273: FILE: mm/page-writeback.c:2113: + .extra2 = SYSCTL_ONE_HUNDRED,$ WARNING: please, no spaces at the start of a line torvalds#273: FILE: mm/page-writeback.c:2113: + .extra2 = SYSCTL_ONE_HUNDRED,$ WARNING: please, no spaces at the start of a line torvalds#274: FILE: mm/page-writeback.c:2114: + },$ WARNING: please, no spaces at the start of a line torvalds#275: FILE: mm/page-writeback.c:2115: + {$ ERROR: code indent should use tabs where possible torvalds#276: FILE: mm/page-writeback.c:2116: + .procname = "dirty_bytes",$ WARNING: please, no spaces at the start of a line torvalds#276: FILE: mm/page-writeback.c:2116: + .procname = "dirty_bytes",$ ERROR: code indent should use tabs where possible torvalds#277: FILE: mm/page-writeback.c:2117: + .data = &vm_dirty_bytes,$ WARNING: please, no spaces at the start of a line torvalds#277: FILE: mm/page-writeback.c:2117: + .data = &vm_dirty_bytes,$ ERROR: code indent should use tabs where possible torvalds#278: FILE: mm/page-writeback.c:2118: + .maxlen = sizeof(vm_dirty_bytes),$ WARNING: please, no spaces at the start of a line torvalds#278: FILE: mm/page-writeback.c:2118: + .maxlen = sizeof(vm_dirty_bytes),$ ERROR: code indent should use tabs where possible torvalds#279: FILE: mm/page-writeback.c:2119: + .mode = 0644,$ WARNING: please, no spaces at the start of a line torvalds#279: FILE: mm/page-writeback.c:2119: + .mode = 0644,$ ERROR: code indent should use tabs where possible torvalds#280: FILE: mm/page-writeback.c:2120: + .proc_handler = dirty_bytes_handler,$ WARNING: please, no spaces at the start of a line torvalds#280: FILE: mm/page-writeback.c:2120: + .proc_handler = dirty_bytes_handler,$ ERROR: code indent should use tabs where possible torvalds#281: FILE: mm/page-writeback.c:2121: + .extra1 = (void *)&dirty_bytes_min,$ WARNING: please, no spaces at the start of a line torvalds#281: FILE: mm/page-writeback.c:2121: + .extra1 = (void *)&dirty_bytes_min,$ WARNING: please, no spaces at the start of a line torvalds#282: FILE: mm/page-writeback.c:2122: + },$ WARNING: please, no spaces at the start of a line torvalds#283: FILE: mm/page-writeback.c:2123: + {$ ERROR: code indent should use tabs where possible torvalds#284: FILE: mm/page-writeback.c:2124: + .procname = "dirty_writeback_centisecs",$ WARNING: please, no spaces at the start of a line torvalds#284: FILE: mm/page-writeback.c:2124: + .procname = "dirty_writeback_centisecs",$ ERROR: code indent should use tabs where possible torvalds#285: FILE: mm/page-writeback.c:2125: + .data = &dirty_writeback_interval,$ WARNING: please, no spaces at the start of a line torvalds#285: FILE: mm/page-writeback.c:2125: + .data = &dirty_writeback_interval,$ ERROR: code indent should use tabs where possible torvalds#286: FILE: mm/page-writeback.c:2126: + .maxlen = sizeof(dirty_writeback_interval),$ WARNING: please, no spaces at the start of a line torvalds#286: FILE: mm/page-writeback.c:2126: + .maxlen = sizeof(dirty_writeback_interval),$ ERROR: code indent should use tabs where possible torvalds#287: FILE: mm/page-writeback.c:2127: + .mode = 0644,$ WARNING: please, no spaces at the start of a line torvalds#287: FILE: mm/page-writeback.c:2127: + .mode = 0644,$ ERROR: code indent should use tabs where possible torvalds#288: FILE: mm/page-writeback.c:2128: + .proc_handler = dirty_writeback_centisecs_handler,$ WARNING: please, no spaces at the start of a line torvalds#288: FILE: mm/page-writeback.c:2128: + .proc_handler = dirty_writeback_centisecs_handler,$ WARNING: please, no spaces at the start of a line torvalds#289: FILE: mm/page-writeback.c:2129: + },$ WARNING: please, no spaces at the start of a line torvalds#290: FILE: mm/page-writeback.c:2130: + {$ ERROR: code indent should use tabs where possible torvalds#291: FILE: mm/page-writeback.c:2131: + .procname = "dirty_expire_centisecs",$ WARNING: please, no spaces at the start of a line torvalds#291: FILE: mm/page-writeback.c:2131: + .procname = "dirty_expire_centisecs",$ ERROR: code indent should use tabs where possible torvalds#292: FILE: mm/page-writeback.c:2132: + .data = &dirty_expire_interval,$ WARNING: please, no spaces at the start of a line torvalds#292: FILE: mm/page-writeback.c:2132: + .data = &dirty_expire_interval,$ ERROR: code indent should use tabs where possible torvalds#293: FILE: mm/page-writeback.c:2133: + .maxlen = sizeof(dirty_expire_interval),$ WARNING: please, no spaces at the start of a line torvalds#293: FILE: mm/page-writeback.c:2133: + .maxlen = sizeof(dirty_expire_interval),$ ERROR: code indent should use tabs where possible torvalds#294: FILE: mm/page-writeback.c:2134: + .mode = 0644,$ WARNING: please, no spaces at the start of a line torvalds#294: FILE: mm/page-writeback.c:2134: + .mode = 0644,$ ERROR: code indent should use tabs where possible torvalds#295: FILE: mm/page-writeback.c:2135: + .proc_handler = proc_dointvec_minmax,$ WARNING: please, no spaces at the start of a line torvalds#295: FILE: mm/page-writeback.c:2135: + .proc_handler = proc_dointvec_minmax,$ ERROR: code indent should use tabs where possible torvalds#296: FILE: mm/page-writeback.c:2136: + .extra1 = SYSCTL_ZERO,$ WARNING: please, no spaces at the start of a line torvalds#296: FILE: mm/page-writeback.c:2136: + .extra1 = SYSCTL_ZERO,$ WARNING: please, no spaces at the start of a line torvalds#297: FILE: mm/page-writeback.c:2137: + },$ total: 37 errors, 49 warnings, 287 lines checked NOTE: For some of the reported defects, checkpatch may be able to mechanically convert to the typical style using --fix or --fix-inplace. NOTE: Whitespace errors detected. You may wish to use scripts/cleanpatch or scripts/cleanfile ./patches/mm-move-page-writeback-sysctls-to-is-own-file.patch has style problems, please review. NOTE: If any of the errors are false positives, please report them to the maintainer, see CHECKPATCH in MAINTAINERS. Please run checkpatch prior to sending patches Cc: Iurii Zaikin <[email protected]> Cc: Kees Cook <[email protected]> Cc: Luis Chamberlain <[email protected]> Cc: zhanglianjie <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Mark Brown <[email protected]>

Before 2e91fa7 ("cgroup: keep zombies associated with their original cgroups"), all dead tasks were associated with init_css_set. If a zombie task is requested for migration, while migration prep operations would still be performed on init_css_set, the actual migration would ignore zombie tasks. As init_css_set is always valid, this worked fine. However, after 2e91fa7, zombie tasks stay with the css_set it was associated with at the time of death. Let's say a task T associated with cgroup A on hierarchy H-1 and cgroup B on hiearchy H-2. After T becomes a zombie, it would still remain associated with A and B. If A only contains zombie tasks, it can be removed. On removal, A gets marked offline but stays pinned until all zombies are drained. At this point, if migration is initiated on T to a cgroup C on hierarchy H-2, migration path would try to prepare T's css_set for migration and trigger the following. WARNING: CPU: 0 PID: 1576 at kernel/cgroup.c:474 cgroup_get+0x121/0x160() CPU: 0 PID: 1576 Comm: bash Not tainted 4.4.0-work+ torvalds#289 ... Call Trace: [<ffffffff8127e63c>] dump_stack+0x4e/0x82 [<ffffffff810445e8>] warn_slowpath_common+0x78/0xb0 [<ffffffff810446d5>] warn_slowpath_null+0x15/0x20 [<ffffffff810c33e1>] cgroup_get+0x121/0x160 [<ffffffff810c349b>] link_css_set+0x7b/0x90 [<ffffffff810c4fbc>] find_css_set+0x3bc/0x5e0 [<ffffffff810c5269>] cgroup_migrate_prepare_dst+0x89/0x1f0 [<ffffffff810c7547>] cgroup_attach_task+0x157/0x230 [<ffffffff810c7a17>] __cgroup_procs_write+0x2b7/0x470 [<ffffffff810c7bdc>] cgroup_tasks_write+0xc/0x10 [<ffffffff810c4790>] cgroup_file_write+0x30/0x1b0 [<ffffffff811c68fc>] kernfs_fop_write+0x13c/0x180 [<ffffffff81151673>] __vfs_write+0x23/0xe0 [<ffffffff81152494>] vfs_write+0xa4/0x1a0 [<ffffffff811532d4>] SyS_write+0x44/0xa0 [<ffffffff814af2d7>] entry_SYSCALL_64_fastpath+0x12/0x6f It doesn't make sense to prepare migration for css_sets pointing to dead cgroups as they are guaranteed to contain only zombies which are ignored later during migration. This patch makes cgroup destruction path mark all affected css_sets as dead and updates the migration path to ignore them during preparation. Signed-off-by: Tejun Heo <[email protected]> Fixes: 2e91fa7 ("cgroup: keep zombies associated with their original cgroups") Cc: [email protected] # v4.4+

Alexei noticed xdp_do_redirect test on BPF CI started failing on BE systems after skb PP recycling was enabled: test_xdp_do_redirect:PASS:prog_run 0 nsec test_xdp_do_redirect:PASS:pkt_count_xdp 0 nsec test_xdp_do_redirect:PASS:pkt_count_zero 0 nsec test_xdp_do_redirect:FAIL:pkt_count_tc unexpected pkt_count_tc: actual 220 != expected 9998 test_max_pkt_size:PASS:prog_run_max_size 0 nsec test_max_pkt_size:PASS:prog_run_too_big 0 nsec close_netns:PASS:setns 0 nsec torvalds#289 xdp_do_redirect:FAIL Summary: 270/1674 PASSED, 30 SKIPPED, 1 FAILED and it doesn't happen on LE systems. Ilya then hunted it down to: #0 0x0000000000aaeee6 in neigh_hh_output (hh=0x83258df0, skb=0x88142200) at linux/include/net/neighbour.h:503 #1 0x0000000000ab2cda in neigh_output (skip_cache=false, skb=0x88142200, n=<optimized out>) at linux/include/net/neighbour.h:544 #2 ip6_finish_output2 (net=net@entry=0x88edba00, sk=sk@entry=0x0, skb=skb@entry=0x88142200) at linux/net/ipv6/ip6_output.c:134 #3 0x0000000000ab4cbc in __ip6_finish_output (skb=0x88142200, sk=0x0, net=0x88edba00) at linux/net/ipv6/ip6_output.c:195 #4 ip6_finish_output (net=0x88edba00, sk=0x0, skb=0x88142200) at linux/net/ipv6/ip6_output.c:206 xdp_do_redirect test places a u32 marker (0x42) right before the Ethernet header to check it then in the XDP program and return %XDP_ABORTED if it's not there. Neigh xmit code likes to round up hard header length to speed up copying the header, so it overwrites two bytes in front of the Eth header. On LE systems, 0x42 is one byte at `data - 4`, while on BE it's `data - 1`, what explains why it happens only there. It didn't happen previously due to that %XDP_PASS meant the page will be discarded and replaced by a new one, but now it can be recycled as well, while bpf_test_run code doesn't reinitialize the content of recycled pages. This mark is limited to this particular test and its setup though, so there's no need to predict 1000 different possible cases. Just move it 4 bytes to the left, still keeping it 32 bit to match on more bytes. Fixes: 9c94bbf ("xdp: recycle Page Pool backed skbs built from XDP frames") Reported-by: Alexei Starovoitov <[email protected]> Link: https://lore.kernel.org/bpf/CAADnVQ+B_JOU+EpP=DKhbY9yXdN6GiRPnpTTXfEZ9sNkUeb-yQ@mail.gmail.com Reported-by: Ilya Leoshkevich <[email protected]> # + debugging Link: https://lore.kernel.org/bpf/[email protected] Signed-off-by: Alexander Lobakin <[email protected]>

Alexei noticed xdp_do_redirect test on BPF CI started failing on BE systems after skb PP recycling was enabled: test_xdp_do_redirect:PASS:prog_run 0 nsec test_xdp_do_redirect:PASS:pkt_count_xdp 0 nsec test_xdp_do_redirect:PASS:pkt_count_zero 0 nsec test_xdp_do_redirect:FAIL:pkt_count_tc unexpected pkt_count_tc: actual 220 != expected 9998 test_max_pkt_size:PASS:prog_run_max_size 0 nsec test_max_pkt_size:PASS:prog_run_too_big 0 nsec close_netns:PASS:setns 0 nsec torvalds#289 xdp_do_redirect:FAIL Summary: 270/1674 PASSED, 30 SKIPPED, 1 FAILED and it doesn't happen on LE systems. Ilya then hunted it down to: #0 0x0000000000aaeee6 in neigh_hh_output (hh=0x83258df0, skb=0x88142200) at linux/include/net/neighbour.h:503 #1 0x0000000000ab2cda in neigh_output (skip_cache=false, skb=0x88142200, n=<optimized out>) at linux/include/net/neighbour.h:544 #2 ip6_finish_output2 (net=net@entry=0x88edba00, sk=sk@entry=0x0, skb=skb@entry=0x88142200) at linux/net/ipv6/ip6_output.c:134 #3 0x0000000000ab4cbc in __ip6_finish_output (skb=0x88142200, sk=0x0, net=0x88edba00) at linux/net/ipv6/ip6_output.c:195 #4 ip6_finish_output (net=0x88edba00, sk=0x0, skb=0x88142200) at linux/net/ipv6/ip6_output.c:206 xdp_do_redirect test places a u32 marker (0x42) right before the Ethernet header to check it then in the XDP program and return %XDP_ABORTED if it's not there. Neigh xmit code likes to round up hard header length to speed up copying the header, so it overwrites two bytes in front of the Eth header. On LE systems, 0x42 is one byte at `data - 4`, while on BE it's `data - 1`, what explains why it happens only there. It didn't happen previously due to that %XDP_PASS meant the page will be discarded and replaced by a new one, but now it can be recycled as well, while bpf_test_run code doesn't reinitialize the content of recycled pages. This mark is limited to this particular test and its setup though, so there's no need to predict 1000 different possible cases. Just move it 4 bytes to the left, still keeping it 32 bit to match on more bytes. Fixes: 9c94bbf ("xdp: recycle Page Pool backed skbs built from XDP frames") Reported-by: Alexei Starovoitov <[email protected]> Link: https://lore.kernel.org/bpf/CAADnVQ+B_JOU+EpP=DKhbY9yXdN6GiRPnpTTXfEZ9sNkUeb-yQ@mail.gmail.com Reported-by: Ilya Leoshkevich <[email protected]> # + debugging Link: https://lore.kernel.org/bpf/[email protected] Signed-off-by: Alexander Lobakin <[email protected]> Acked-by: Toke Høiland-Jørgensen <[email protected]> Tested-by: Ilya Leoshkevich <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>

ravippandey closed this May 19, 2016

TheSven73 pushed a commit to TheSven73/linux that referenced this pull request May 25, 2021

Merge pull request torvalds#289 from obviyus/change-pin

1a73789

rust: make SharedState::try_new() return a pinned Arc

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Added code for custom file prefetching #289

Added code for custom file prefetching #289

ravippandey commented May 19, 2016

Added code for custom file prefetching #289

Added code for custom file prefetching #289

Conversation

ravippandey commented May 19, 2016