compiling with all the newest fix?" #319
Comments
|
Sorry this isn't a linux kernel issue. |
koalo
pushed a commit
to koalo/linux
that referenced
this issue
Aug 27, 2013
Commit b81ea1b (PM / QoS: Fix concurrency issues and memory leaks in device PM QoS) put calls to pm_qos_sysfs_add_latency(), pm_qos_sysfs_add_flags(), pm_qos_sysfs_remove_latency(), and pm_qos_sysfs_remove_flags() under dev_pm_qos_mtx, which was a mistake, because it may lead to deadlocks in some situations. For example, if pm_qos_remote_wakeup_store() is run in parallel with dev_pm_qos_constraints_destroy(), they may deadlock in the following way: ====================================================== [ INFO: possible circular locking dependency detected ] 3.9.0-rc4-next-20130328-sasha-00014-g91a3267 raspberrypi#319 Tainted: G W ------------------------------------------------------- trinity-child6/12371 is trying to acquire lock: (s_active#54){++++.+}, at: [<ffffffff81301631>] sysfs_addrm_finish+0x31/0x60 but task is already holding lock: (dev_pm_qos_mtx){+.+.+.}, at: [<ffffffff81f07cc3>] dev_pm_qos_constraints_destroy+0x23/0x250 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (dev_pm_qos_mtx){+.+.+.}: [<ffffffff811811da>] lock_acquire+0x1aa/0x240 [<ffffffff83dab809>] __mutex_lock_common+0x59/0x5e0 [<ffffffff83dabebf>] mutex_lock_nested+0x3f/0x50 [<ffffffff81f07f2f>] dev_pm_qos_update_flags+0x3f/0xc0 [<ffffffff81f05f4f>] pm_qos_remote_wakeup_store+0x3f/0x70 [<ffffffff81efbb43>] dev_attr_store+0x13/0x20 [<ffffffff812ffdaa>] sysfs_write_file+0xfa/0x150 [<ffffffff8127f2c1>] __kernel_write+0x81/0x150 [<ffffffff812afc2d>] write_pipe_buf+0x4d/0x80 [<ffffffff812af57c>] splice_from_pipe_feed+0x7c/0x120 [<ffffffff812afa25>] __splice_from_pipe+0x45/0x80 [<ffffffff812b14fc>] splice_from_pipe+0x4c/0x70 [<ffffffff812b1538>] default_file_splice_write+0x18/0x30 [<ffffffff812afae3>] do_splice_from+0x83/0xb0 [<ffffffff812afb2e>] direct_splice_actor+0x1e/0x20 [<ffffffff812b0277>] splice_direct_to_actor+0xe7/0x200 [<ffffffff812b15bc>] do_splice_direct+0x4c/0x70 [<ffffffff8127eda9>] do_sendfile+0x169/0x300 [<ffffffff8127ff94>] SyS_sendfile64+0x64/0xb0 [<ffffffff83db7d18>] tracesys+0xe1/0xe6 -> #0 (s_active#54){++++.+}: [<ffffffff811800cf>] __lock_acquire+0x15bf/0x1e50 [<ffffffff811811da>] lock_acquire+0x1aa/0x240 [<ffffffff81300aa2>] sysfs_deactivate+0x122/0x1a0 [<ffffffff81301631>] sysfs_addrm_finish+0x31/0x60 [<ffffffff812ff77f>] sysfs_hash_and_remove+0x7f/0xb0 [<ffffffff813035a1>] sysfs_unmerge_group+0x51/0x70 [<ffffffff81f068f4>] pm_qos_sysfs_remove_flags+0x14/0x20 [<ffffffff81f07490>] __dev_pm_qos_hide_flags+0x30/0x70 [<ffffffff81f07cd5>] dev_pm_qos_constraints_destroy+0x35/0x250 [<ffffffff81f06931>] dpm_sysfs_remove+0x11/0x50 [<ffffffff81efcf6f>] device_del+0x3f/0x1b0 [<ffffffff81efd128>] device_unregister+0x48/0x60 [<ffffffff82d4083c>] usb_hub_remove_port_device+0x1c/0x20 [<ffffffff82d2a9cd>] hub_disconnect+0xdd/0x160 [<ffffffff82d36ab7>] usb_unbind_interface+0x67/0x170 [<ffffffff81f001a7>] __device_release_driver+0x87/0xe0 [<ffffffff81f00559>] device_release_driver+0x29/0x40 [<ffffffff81effc58>] bus_remove_device+0x148/0x160 [<ffffffff81efd07f>] device_del+0x14f/0x1b0 [<ffffffff82d344f9>] usb_disable_device+0xf9/0x280 [<ffffffff82d34ff8>] usb_set_configuration+0x268/0x840 [<ffffffff82d3a7fc>] usb_remove_store+0x4c/0x80 [<ffffffff81efbb43>] dev_attr_store+0x13/0x20 [<ffffffff812ffdaa>] sysfs_write_file+0xfa/0x150 [<ffffffff8127f71d>] do_loop_readv_writev+0x4d/0x90 [<ffffffff8127f999>] do_readv_writev+0xf9/0x1e0 [<ffffffff8127faba>] vfs_writev+0x3a/0x60 [<ffffffff8127fc60>] SyS_writev+0x50/0xd0 [<ffffffff83db7d18>] tracesys+0xe1/0xe6 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(dev_pm_qos_mtx); lock(s_active#54); lock(dev_pm_qos_mtx); lock(s_active#54); *** DEADLOCK *** To avoid that, remove the calls to functions mentioned above from under dev_pm_qos_mtx and introduce a separate lock to prevent races between functions that add or remove device PM QoS sysfs attributes from happening. Reported-by: Sasha Levin <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>
popcornmix
pushed a commit
that referenced
this issue
Jul 21, 2021
…format [ Upstream commit 06d213d ] For incoming SCO connection with transparent coding format, alt setting of CVSD is getting applied instead of Transparent. Before fix: < HCI Command: Accept Synchron.. (0x01|0x0029) plen 21 #2196 [hci0] 321.342548 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Transmit bandwidth: 8000 Receive bandwidth: 8000 Max latency: 13 Setting: 0x0003 Input Coding: Linear Input Data Format: 1's complement Input Sample Size: 8-bit # of bits padding at MSB: 0 Air Coding Format: Transparent Data Retransmission effort: Optimize for link quality (0x02) Packet type: 0x003f HV1 may be used HV2 may be used HV3 may be used EV3 may be used EV4 may be used EV5 may be used > HCI Event: Command Status (0x0f) plen 4 #2197 [hci0] 321.343585 Accept Synchronous Connection Request (0x01|0x0029) ncmd 1 Status: Success (0x00) > HCI Event: Synchronous Connect Comp.. (0x2c) plen 17 #2198 [hci0] 321.351666 Status: Success (0x00) Handle: 257 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Link type: eSCO (0x02) Transmission interval: 0x0c Retransmission window: 0x04 RX packet length: 60 TX packet length: 60 Air mode: Transparent (0x03) ........ > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2336 [hci0] 321.383655 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2337 [hci0] 321.389558 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2338 [hci0] 321.393615 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2339 [hci0] 321.393618 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2340 [hci0] 321.393618 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2341 [hci0] 321.397070 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2342 [hci0] 321.403622 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2343 [hci0] 321.403625 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2344 [hci0] 321.403625 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2345 [hci0] 321.403625 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2346 [hci0] 321.404569 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2347 [hci0] 321.412091 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2348 [hci0] 321.413626 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2349 [hci0] 321.413630 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2350 [hci0] 321.413630 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2351 [hci0] 321.419674 After fix: < HCI Command: Accept Synchronou.. (0x01|0x0029) plen 21 #309 [hci0] 49.439693 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Transmit bandwidth: 8000 Receive bandwidth: 8000 Max latency: 13 Setting: 0x0003 Input Coding: Linear Input Data Format: 1's complement Input Sample Size: 8-bit # of bits padding at MSB: 0 Air Coding Format: Transparent Data Retransmission effort: Optimize for link quality (0x02) Packet type: 0x003f HV1 may be used HV2 may be used HV3 may be used EV3 may be used EV4 may be used EV5 may be used > HCI Event: Command Status (0x0f) plen 4 #310 [hci0] 49.440308 Accept Synchronous Connection Request (0x01|0x0029) ncmd 1 Status: Success (0x00) > HCI Event: Synchronous Connect Complete (0x2c) plen 17 #311 [hci0] 49.449308 Status: Success (0x00) Handle: 257 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Link type: eSCO (0x02) Transmission interval: 0x0c Retransmission window: 0x04 RX packet length: 60 TX packet length: 60 Air mode: Transparent (0x03) < SCO Data TX: Handle 257 flags 0x00 dlen 60 #312 [hci0] 49.450421 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #313 [hci0] 49.457927 > HCI Event: Max Slots Change (0x1b) plen 3 #314 [hci0] 49.460345 Handle: 256 Max slots: 5 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #315 [hci0] 49.465453 > SCO Data RX: Handle 257 flags 0x00 dlen 60 #316 [hci0] 49.470502 > SCO Data RX: Handle 257 flags 0x00 dlen 60 #317 [hci0] 49.470519 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #318 [hci0] 49.472996 > SCO Data RX: Handle 257 flags 0x00 dlen 60 #319 [hci0] 49.480412 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #320 [hci0] 49.480492 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #321 [hci0] 49.487989 > SCO Data RX: Handle 257 flags 0x00 dlen 60 #322 [hci0] 49.490303 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #323 [hci0] 49.495496 > SCO Data RX: Handle 257 flags 0x00 dlen 60 #324 [hci0] 49.500304 > SCO Data RX: Handle 257 flags 0x00 dlen 60 #325 [hci0] 49.500311 Signed-off-by: Kiran K <[email protected]> Signed-off-by: Lokendra Singh <[email protected]> Signed-off-by: Marcel Holtmann <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
popcornmix
pushed a commit
that referenced
this issue
Jul 22, 2021
…format [ Upstream commit 06d213d ] For incoming SCO connection with transparent coding format, alt setting of CVSD is getting applied instead of Transparent. Before fix: < HCI Command: Accept Synchron.. (0x01|0x0029) plen 21 #2196 [hci0] 321.342548 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Transmit bandwidth: 8000 Receive bandwidth: 8000 Max latency: 13 Setting: 0x0003 Input Coding: Linear Input Data Format: 1's complement Input Sample Size: 8-bit # of bits padding at MSB: 0 Air Coding Format: Transparent Data Retransmission effort: Optimize for link quality (0x02) Packet type: 0x003f HV1 may be used HV2 may be used HV3 may be used EV3 may be used EV4 may be used EV5 may be used > HCI Event: Command Status (0x0f) plen 4 #2197 [hci0] 321.343585 Accept Synchronous Connection Request (0x01|0x0029) ncmd 1 Status: Success (0x00) > HCI Event: Synchronous Connect Comp.. (0x2c) plen 17 #2198 [hci0] 321.351666 Status: Success (0x00) Handle: 257 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Link type: eSCO (0x02) Transmission interval: 0x0c Retransmission window: 0x04 RX packet length: 60 TX packet length: 60 Air mode: Transparent (0x03) ........ > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2336 [hci0] 321.383655 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2337 [hci0] 321.389558 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2338 [hci0] 321.393615 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2339 [hci0] 321.393618 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2340 [hci0] 321.393618 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2341 [hci0] 321.397070 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2342 [hci0] 321.403622 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2343 [hci0] 321.403625 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2344 [hci0] 321.403625 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2345 [hci0] 321.403625 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2346 [hci0] 321.404569 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2347 [hci0] 321.412091 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2348 [hci0] 321.413626 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2349 [hci0] 321.413630 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2350 [hci0] 321.413630 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2351 [hci0] 321.419674 After fix: < HCI Command: Accept Synchronou.. (0x01|0x0029) plen 21 #309 [hci0] 49.439693 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Transmit bandwidth: 8000 Receive bandwidth: 8000 Max latency: 13 Setting: 0x0003 Input Coding: Linear Input Data Format: 1's complement Input Sample Size: 8-bit # of bits padding at MSB: 0 Air Coding Format: Transparent Data Retransmission effort: Optimize for link quality (0x02) Packet type: 0x003f HV1 may be used HV2 may be used HV3 may be used EV3 may be used EV4 may be used EV5 may be used > HCI Event: Command Status (0x0f) plen 4 #310 [hci0] 49.440308 Accept Synchronous Connection Request (0x01|0x0029) ncmd 1 Status: Success (0x00) > HCI Event: Synchronous Connect Complete (0x2c) plen 17 #311 [hci0] 49.449308 Status: Success (0x00) Handle: 257 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Link type: eSCO (0x02) Transmission interval: 0x0c Retransmission window: 0x04 RX packet length: 60 TX packet length: 60 Air mode: Transparent (0x03) < SCO Data TX: Handle 257 flags 0x00 dlen 60 #312 [hci0] 49.450421 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #313 [hci0] 49.457927 > HCI Event: Max Slots Change (0x1b) plen 3 #314 [hci0] 49.460345 Handle: 256 Max slots: 5 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #315 [hci0] 49.465453 > SCO Data RX: Handle 257 flags 0x00 dlen 60 #316 [hci0] 49.470502 > SCO Data RX: Handle 257 flags 0x00 dlen 60 #317 [hci0] 49.470519 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #318 [hci0] 49.472996 > SCO Data RX: Handle 257 flags 0x00 dlen 60 #319 [hci0] 49.480412 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #320 [hci0] 49.480492 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #321 [hci0] 49.487989 > SCO Data RX: Handle 257 flags 0x00 dlen 60 #322 [hci0] 49.490303 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #323 [hci0] 49.495496 > SCO Data RX: Handle 257 flags 0x00 dlen 60 #324 [hci0] 49.500304 > SCO Data RX: Handle 257 flags 0x00 dlen 60 #325 [hci0] 49.500311 Signed-off-by: Kiran K <[email protected]> Signed-off-by: Lokendra Singh <[email protected]> Signed-off-by: Marcel Holtmann <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
popcornmix
pushed a commit
that referenced
this issue
Jul 27, 2021
…format [ Upstream commit 06d213d ] For incoming SCO connection with transparent coding format, alt setting of CVSD is getting applied instead of Transparent. Before fix: < HCI Command: Accept Synchron.. (0x01|0x0029) plen 21 #2196 [hci0] 321.342548 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Transmit bandwidth: 8000 Receive bandwidth: 8000 Max latency: 13 Setting: 0x0003 Input Coding: Linear Input Data Format: 1's complement Input Sample Size: 8-bit # of bits padding at MSB: 0 Air Coding Format: Transparent Data Retransmission effort: Optimize for link quality (0x02) Packet type: 0x003f HV1 may be used HV2 may be used HV3 may be used EV3 may be used EV4 may be used EV5 may be used > HCI Event: Command Status (0x0f) plen 4 #2197 [hci0] 321.343585 Accept Synchronous Connection Request (0x01|0x0029) ncmd 1 Status: Success (0x00) > HCI Event: Synchronous Connect Comp.. (0x2c) plen 17 #2198 [hci0] 321.351666 Status: Success (0x00) Handle: 257 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Link type: eSCO (0x02) Transmission interval: 0x0c Retransmission window: 0x04 RX packet length: 60 TX packet length: 60 Air mode: Transparent (0x03) ........ > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2336 [hci0] 321.383655 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2337 [hci0] 321.389558 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2338 [hci0] 321.393615 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2339 [hci0] 321.393618 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2340 [hci0] 321.393618 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2341 [hci0] 321.397070 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2342 [hci0] 321.403622 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2343 [hci0] 321.403625 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2344 [hci0] 321.403625 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2345 [hci0] 321.403625 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2346 [hci0] 321.404569 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2347 [hci0] 321.412091 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2348 [hci0] 321.413626 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2349 [hci0] 321.413630 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2350 [hci0] 321.413630 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2351 [hci0] 321.419674 After fix: < HCI Command: Accept Synchronou.. (0x01|0x0029) plen 21 #309 [hci0] 49.439693 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Transmit bandwidth: 8000 Receive bandwidth: 8000 Max latency: 13 Setting: 0x0003 Input Coding: Linear Input Data Format: 1's complement Input Sample Size: 8-bit # of bits padding at MSB: 0 Air Coding Format: Transparent Data Retransmission effort: Optimize for link quality (0x02) Packet type: 0x003f HV1 may be used HV2 may be used HV3 may be used EV3 may be used EV4 may be used EV5 may be used > HCI Event: Command Status (0x0f) plen 4 #310 [hci0] 49.440308 Accept Synchronous Connection Request (0x01|0x0029) ncmd 1 Status: Success (0x00) > HCI Event: Synchronous Connect Complete (0x2c) plen 17 #311 [hci0] 49.449308 Status: Success (0x00) Handle: 257 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Link type: eSCO (0x02) Transmission interval: 0x0c Retransmission window: 0x04 RX packet length: 60 TX packet length: 60 Air mode: Transparent (0x03) < SCO Data TX: Handle 257 flags 0x00 dlen 60 #312 [hci0] 49.450421 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #313 [hci0] 49.457927 > HCI Event: Max Slots Change (0x1b) plen 3 #314 [hci0] 49.460345 Handle: 256 Max slots: 5 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #315 [hci0] 49.465453 > SCO Data RX: Handle 257 flags 0x00 dlen 60 #316 [hci0] 49.470502 > SCO Data RX: Handle 257 flags 0x00 dlen 60 #317 [hci0] 49.470519 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #318 [hci0] 49.472996 > SCO Data RX: Handle 257 flags 0x00 dlen 60 #319 [hci0] 49.480412 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #320 [hci0] 49.480492 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #321 [hci0] 49.487989 > SCO Data RX: Handle 257 flags 0x00 dlen 60 #322 [hci0] 49.490303 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #323 [hci0] 49.495496 > SCO Data RX: Handle 257 flags 0x00 dlen 60 #324 [hci0] 49.500304 > SCO Data RX: Handle 257 flags 0x00 dlen 60 #325 [hci0] 49.500311 Signed-off-by: Kiran K <[email protected]> Signed-off-by: Lokendra Singh <[email protected]> Signed-off-by: Marcel Holtmann <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
popcornmix
pushed a commit
that referenced
this issue
Apr 3, 2024
In case when is64 == 1 in emit(A64_REV32(is64, dst, dst), ctx) the generated insn reverses byte order for both high and low 32-bit words, resuling in an incorrect swap as indicated by the jit test: [ 9757.262607] test_bpf: #312 BSWAP 16: 0x0123456789abcdef -> 0xefcd jited:1 8 PASS [ 9757.264435] test_bpf: #313 BSWAP 32: 0x0123456789abcdef -> 0xefcdab89 jited:1 ret 1460850314 != -271733879 (0x5712ce8a != 0xefcdab89)FAIL (1 times) [ 9757.266260] test_bpf: #314 BSWAP 64: 0x0123456789abcdef -> 0x67452301 jited:1 8 PASS [ 9757.268000] test_bpf: #315 BSWAP 64: 0x0123456789abcdef >> 32 -> 0xefcdab89 jited:1 8 PASS [ 9757.269686] test_bpf: #316 BSWAP 16: 0xfedcba9876543210 -> 0x1032 jited:1 8 PASS [ 9757.271380] test_bpf: #317 BSWAP 32: 0xfedcba9876543210 -> 0x10325476 jited:1 ret -1460850316 != 271733878 (0xa8ed3174 != 0x10325476)FAIL (1 times) [ 9757.273022] test_bpf: #318 BSWAP 64: 0xfedcba9876543210 -> 0x98badcfe jited:1 7 PASS [ 9757.274721] test_bpf: #319 BSWAP 64: 0xfedcba9876543210 >> 32 -> 0x10325476 jited:1 9 PASS Fix this by forcing 32bit variant of rev32. Fixes: 1104247 ("bpf, arm64: Support unconditional bswap") Signed-off-by: Artem Savkov <[email protected]> Tested-by: Puranjay Mohan <[email protected]> Acked-by: Puranjay Mohan <[email protected]> Acked-by: Xu Kuohai <[email protected]> Message-ID: <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]>
popcornmix
pushed a commit
that referenced
this issue
Apr 11, 2024
[ Upstream commit a51cd6b ] In case when is64 == 1 in emit(A64_REV32(is64, dst, dst), ctx) the generated insn reverses byte order for both high and low 32-bit words, resuling in an incorrect swap as indicated by the jit test: [ 9757.262607] test_bpf: #312 BSWAP 16: 0x0123456789abcdef -> 0xefcd jited:1 8 PASS [ 9757.264435] test_bpf: #313 BSWAP 32: 0x0123456789abcdef -> 0xefcdab89 jited:1 ret 1460850314 != -271733879 (0x5712ce8a != 0xefcdab89)FAIL (1 times) [ 9757.266260] test_bpf: #314 BSWAP 64: 0x0123456789abcdef -> 0x67452301 jited:1 8 PASS [ 9757.268000] test_bpf: #315 BSWAP 64: 0x0123456789abcdef >> 32 -> 0xefcdab89 jited:1 8 PASS [ 9757.269686] test_bpf: #316 BSWAP 16: 0xfedcba9876543210 -> 0x1032 jited:1 8 PASS [ 9757.271380] test_bpf: #317 BSWAP 32: 0xfedcba9876543210 -> 0x10325476 jited:1 ret -1460850316 != 271733878 (0xa8ed3174 != 0x10325476)FAIL (1 times) [ 9757.273022] test_bpf: #318 BSWAP 64: 0xfedcba9876543210 -> 0x98badcfe jited:1 7 PASS [ 9757.274721] test_bpf: #319 BSWAP 64: 0xfedcba9876543210 >> 32 -> 0x10325476 jited:1 9 PASS Fix this by forcing 32bit variant of rev32. Fixes: 1104247 ("bpf, arm64: Support unconditional bswap") Signed-off-by: Artem Savkov <[email protected]> Tested-by: Puranjay Mohan <[email protected]> Acked-by: Puranjay Mohan <[email protected]> Acked-by: Xu Kuohai <[email protected]> Message-ID: <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
popcornmix
pushed a commit
that referenced
this issue
Apr 11, 2024
[ Upstream commit a51cd6b ] In case when is64 == 1 in emit(A64_REV32(is64, dst, dst), ctx) the generated insn reverses byte order for both high and low 32-bit words, resuling in an incorrect swap as indicated by the jit test: [ 9757.262607] test_bpf: #312 BSWAP 16: 0x0123456789abcdef -> 0xefcd jited:1 8 PASS [ 9757.264435] test_bpf: #313 BSWAP 32: 0x0123456789abcdef -> 0xefcdab89 jited:1 ret 1460850314 != -271733879 (0x5712ce8a != 0xefcdab89)FAIL (1 times) [ 9757.266260] test_bpf: #314 BSWAP 64: 0x0123456789abcdef -> 0x67452301 jited:1 8 PASS [ 9757.268000] test_bpf: #315 BSWAP 64: 0x0123456789abcdef >> 32 -> 0xefcdab89 jited:1 8 PASS [ 9757.269686] test_bpf: #316 BSWAP 16: 0xfedcba9876543210 -> 0x1032 jited:1 8 PASS [ 9757.271380] test_bpf: #317 BSWAP 32: 0xfedcba9876543210 -> 0x10325476 jited:1 ret -1460850316 != 271733878 (0xa8ed3174 != 0x10325476)FAIL (1 times) [ 9757.273022] test_bpf: #318 BSWAP 64: 0xfedcba9876543210 -> 0x98badcfe jited:1 7 PASS [ 9757.274721] test_bpf: #319 BSWAP 64: 0xfedcba9876543210 >> 32 -> 0x10325476 jited:1 9 PASS Fix this by forcing 32bit variant of rev32. Fixes: 1104247 ("bpf, arm64: Support unconditional bswap") Signed-off-by: Artem Savkov <[email protected]> Tested-by: Puranjay Mohan <[email protected]> Acked-by: Puranjay Mohan <[email protected]> Acked-by: Xu Kuohai <[email protected]> Message-ID: <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
popcornmix
pushed a commit
that referenced
this issue
Jun 10, 2024
When the following snippet is run, lockdep will report a deadlock[1].
/* Acquire all queues dim_locks */
for (i = 0; i < vi->max_queue_pairs; i++)
mutex_lock(&vi->rq[i].dim_lock);
There's no deadlock here because the vq locks are always taken
in the same order, but lockdep can not figure it out. So refactoring
the code to alleviate the problem.
[1]
========================================================
WARNING: possible recursive locking detected
6.9.0-rc7+ #319 Not tainted
--------------------------------------------
ethtool/962 is trying to acquire lock:
but task is already holding lock:
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&vi->rq[i].dim_lock);
lock(&vi->rq[i].dim_lock);
*** DEADLOCK ***
May be due to missing lock nesting notation
3 locks held by ethtool/962:
#0: ffffffff82dbaab0 (cb_lock){++++}-{3:3}, at: genl_rcv+0x19/0x40
#1: ffffffff82dad0a8 (rtnl_mutex){+.+.}-{3:3}, at:
ethnl_default_set_doit+0xbe/0x1e0
stack backtrace:
CPU: 6 PID: 962 Comm: ethtool Not tainted 6.9.0-rc7+ #319
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x79/0xb0
check_deadlock+0x130/0x220
__lock_acquire+0x861/0x990
lock_acquire.part.0+0x72/0x1d0
? lock_acquire+0xf8/0x130
__mutex_lock+0x71/0xd50
virtnet_set_coalesce+0x151/0x190
__ethnl_set_coalesce.isra.0+0x3f8/0x4d0
ethnl_set_coalesce+0x34/0x90
ethnl_default_set_doit+0xdd/0x1e0
genl_family_rcv_msg_doit+0xdc/0x130
genl_family_rcv_msg+0x154/0x230
? __pfx_ethnl_default_set_doit+0x10/0x10
genl_rcv_msg+0x4b/0xa0
? __pfx_genl_rcv_msg+0x10/0x10
netlink_rcv_skb+0x5a/0x110
genl_rcv+0x28/0x40
netlink_unicast+0x1af/0x280
netlink_sendmsg+0x20e/0x460
__sys_sendto+0x1fe/0x210
? find_held_lock+0x2b/0x80
? do_user_addr_fault+0x3a2/0x8a0
? __lock_release+0x5e/0x160
? do_user_addr_fault+0x3a2/0x8a0
? lock_release+0x72/0x140
? do_user_addr_fault+0x3a7/0x8a0
__x64_sys_sendto+0x29/0x30
do_syscall_64+0x78/0x180
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Fixes: 4d4ac2e ("virtio_net: Add a lock for per queue RX coalesce")
Signed-off-by: Heng Qi <[email protected]>
Acked-by: Michael S. Tsirkin <[email protected]>
Reviewed-by: Xuan Zhuo <[email protected]>
Acked-by: Jason Wang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
popcornmix
pushed a commit
that referenced
this issue
Jun 12, 2024
[ Upstream commit 8ecf3c1 ] Recent additions in BPF like cpu v4 instructions, test_bpf module exhibits the following failures: test_bpf: #82 ALU_MOVSX | BPF_B jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times) test_bpf: #83 ALU_MOVSX | BPF_H jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times) test_bpf: #84 ALU64_MOVSX | BPF_B jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times) test_bpf: #85 ALU64_MOVSX | BPF_H jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times) test_bpf: #86 ALU64_MOVSX | BPF_W jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times) test_bpf: #165 ALU_SDIV_X: -6 / 2 = -3 jited:1 ret 2147483645 != -3 (0x7ffffffd != 0xfffffffd)FAIL (1 times) test_bpf: #166 ALU_SDIV_K: -6 / 2 = -3 jited:1 ret 2147483645 != -3 (0x7ffffffd != 0xfffffffd)FAIL (1 times) test_bpf: #169 ALU_SMOD_X: -7 % 2 = -1 jited:1 ret 1 != -1 (0x1 != 0xffffffff)FAIL (1 times) test_bpf: #170 ALU_SMOD_K: -7 % 2 = -1 jited:1 ret 1 != -1 (0x1 != 0xffffffff)FAIL (1 times) test_bpf: #172 ALU64_SMOD_K: -7 % 2 = -1 jited:1 ret 1 != -1 (0x1 != 0xffffffff)FAIL (1 times) test_bpf: #313 BSWAP 16: 0x0123456789abcdef -> 0xefcd eBPF filter opcode 00d7 (@2) unsupported jited:0 301 PASS test_bpf: #314 BSWAP 32: 0x0123456789abcdef -> 0xefcdab89 eBPF filter opcode 00d7 (@2) unsupported jited:0 555 PASS test_bpf: #315 BSWAP 64: 0x0123456789abcdef -> 0x67452301 eBPF filter opcode 00d7 (@2) unsupported jited:0 268 PASS test_bpf: #316 BSWAP 64: 0x0123456789abcdef >> 32 -> 0xefcdab89 eBPF filter opcode 00d7 (@2) unsupported jited:0 269 PASS test_bpf: #317 BSWAP 16: 0xfedcba9876543210 -> 0x1032 eBPF filter opcode 00d7 (@2) unsupported jited:0 460 PASS test_bpf: #318 BSWAP 32: 0xfedcba9876543210 -> 0x10325476 eBPF filter opcode 00d7 (@2) unsupported jited:0 320 PASS test_bpf: #319 BSWAP 64: 0xfedcba9876543210 -> 0x98badcfe eBPF filter opcode 00d7 (@2) unsupported jited:0 222 PASS test_bpf: #320 BSWAP 64: 0xfedcba9876543210 >> 32 -> 0x10325476 eBPF filter opcode 00d7 (@2) unsupported jited:0 273 PASS test_bpf: #344 BPF_LDX_MEMSX | BPF_B eBPF filter opcode 0091 (@5) unsupported jited:0 432 PASS test_bpf: #345 BPF_LDX_MEMSX | BPF_H eBPF filter opcode 0089 (@5) unsupported jited:0 381 PASS test_bpf: #346 BPF_LDX_MEMSX | BPF_W eBPF filter opcode 0081 (@5) unsupported jited:0 505 PASS test_bpf: #490 JMP32_JA: Unconditional jump: if (true) return 1 eBPF filter opcode 0006 (@1) unsupported jited:0 261 PASS test_bpf: Summary: 1040 PASSED, 10 FAILED, [924/1038 JIT'ed] Fix them by adding missing processing. Fixes: daabb2b ("bpf/tests: add tests for cpuv4 instructions") Signed-off-by: Christophe Leroy <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://msgid.link/91de862dda99d170697eb79ffb478678af7e0b27.1709652689.git.christophe.leroy@csgroup.eu Signed-off-by: Sasha Levin <[email protected]>
popcornmix
pushed a commit
that referenced
this issue
Oct 21, 2024
Commit 76d54bf ("nvme-tcp: don't access released socket during error recovery") added a mutex_lock() call for the queue->queue_lock in nvme_tcp_get_address(). However, the mutex_lock() races with mutex_destroy() in nvme_tcp_free_queue(), and causes the WARN below. DEBUG_LOCKS_WARN_ON(lock->magic != lock) WARNING: CPU: 3 PID: 34077 at kernel/locking/mutex.c:587 __mutex_lock+0xcf0/0x1220 Modules linked in: nvmet_tcp nvmet nvme_tcp nvme_fabrics iw_cm ib_cm ib_core pktcdvd nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables qrtr sunrpc ppdev 9pnet_virtio 9pnet pcspkr netfs parport_pc parport e1000 i2c_piix4 i2c_smbus loop fuse nfnetlink zram bochs drm_vram_helper drm_ttm_helper ttm drm_kms_helper xfs drm sym53c8xx floppy nvme scsi_transport_spi nvme_core nvme_auth serio_raw ata_generic pata_acpi dm_multipath qemu_fw_cfg [last unloaded: ib_uverbs] CPU: 3 UID: 0 PID: 34077 Comm: udisksd Not tainted 6.11.0-rc7 #319 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014 RIP: 0010:__mutex_lock+0xcf0/0x1220 Code: 08 84 d2 0f 85 c8 04 00 00 8b 15 ef b6 c8 01 85 d2 0f 85 78 f4 ff ff 48 c7 c6 20 93 ee af 48 c7 c7 60 91 ee af e8 f0 a7 6d fd <0f> 0b e9 5e f4 ff ff 48 b8 00 00 00 00 00 fc ff df 4c 89 f2 48 c1 RSP: 0018:ffff88811305f760 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff88812c652058 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000004 RDI: 0000000000000001 RBP: ffff88811305f8b0 R08: 0000000000000001 R09: ffffed1075c36341 R10: ffff8883ae1b1a0b R11: 0000000000010498 R12: 0000000000000000 R13: 0000000000000000 R14: dffffc0000000000 R15: ffff88812c652058 FS: 00007f9713ae4980(0000) GS:ffff8883ae180000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fcd78483c7c CR3: 0000000122c38000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? __warn.cold+0x5b/0x1af ? __mutex_lock+0xcf0/0x1220 ? report_bug+0x1ec/0x390 ? handle_bug+0x3c/0x80 ? exc_invalid_op+0x13/0x40 ? asm_exc_invalid_op+0x16/0x20 ? __mutex_lock+0xcf0/0x1220 ? nvme_tcp_get_address+0xc2/0x1e0 [nvme_tcp] ? __pfx___mutex_lock+0x10/0x10 ? __lock_acquire+0xd6a/0x59e0 ? nvme_tcp_get_address+0xc2/0x1e0 [nvme_tcp] nvme_tcp_get_address+0xc2/0x1e0 [nvme_tcp] ? __pfx_nvme_tcp_get_address+0x10/0x10 [nvme_tcp] nvme_sysfs_show_address+0x81/0xc0 [nvme_core] dev_attr_show+0x42/0x80 ? __asan_memset+0x1f/0x40 sysfs_kf_seq_show+0x1f0/0x370 seq_read_iter+0x2cb/0x1130 ? rw_verify_area+0x3b1/0x590 ? __mutex_lock+0x433/0x1220 vfs_read+0x6a6/0xa20 ? lockdep_hardirqs_on+0x78/0x100 ? __pfx_vfs_read+0x10/0x10 ksys_read+0xf7/0x1d0 ? __pfx_ksys_read+0x10/0x10 ? __x64_sys_openat+0x105/0x1d0 do_syscall_64+0x93/0x180 ? lockdep_hardirqs_on_prepare+0x16d/0x400 ? do_syscall_64+0x9f/0x180 ? lockdep_hardirqs_on+0x78/0x100 ? do_syscall_64+0x9f/0x180 ? __pfx_ksys_read+0x10/0x10 ? lockdep_hardirqs_on_prepare+0x16d/0x400 ? do_syscall_64+0x9f/0x180 ? lockdep_hardirqs_on+0x78/0x100 ? do_syscall_64+0x9f/0x180 ? lockdep_hardirqs_on_prepare+0x16d/0x400 ? do_syscall_64+0x9f/0x180 ? lockdep_hardirqs_on+0x78/0x100 ? do_syscall_64+0x9f/0x180 ? lockdep_hardirqs_on_prepare+0x16d/0x400 ? do_syscall_64+0x9f/0x180 ? lockdep_hardirqs_on+0x78/0x100 ? do_syscall_64+0x9f/0x180 ? lockdep_hardirqs_on_prepare+0x16d/0x400 ? do_syscall_64+0x9f/0x180 ? lockdep_hardirqs_on+0x78/0x100 ? do_syscall_64+0x9f/0x180 ? do_syscall_64+0x9f/0x180 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f9713f55cfa Code: 55 48 89 e5 48 83 ec 20 48 89 55 e8 48 89 75 f0 89 7d f8 e8 e8 74 f8 ff 48 8b 55 e8 48 8b 75 f0 41 89 c0 8b 7d f8 31 c0 0f 05 <48> 3d 00 f0 ff ff 77 2e 44 89 c7 48 89 45 f8 e8 42 75 f8 ff 48 8b RSP: 002b:00007ffd7f512e70 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 RAX: ffffffffffffffda RBX: 000055c38f316859 RCX: 00007f9713f55cfa RDX: 0000000000000fff RSI: 00007ffd7f512eb0 RDI: 0000000000000011 RBP: 00007ffd7f512e90 R08: 0000000000000000 R09: 00000000ffffffff R10: 0000000000000000 R11: 0000000000000246 R12: 000055c38f317148 R13: 0000000000000000 R14: 00007f96f4004f30 R15: 000055c3b6b623c0 </TASK> The WARN is observed when the blktests test case nvme/014 is repeated with tcp transport. It is rare, and 200 times repeat is required to recreate in some test environments. To avoid the WARN, check the NVME_TCP_Q_LIVE flag before locking queue->queue_lock. The flag is cleared long time before the lock gets destroyed. Signed-off-by: Hannes Reinecke <[email protected]> Signed-off-by: Shin'ichiro Kawasaki <[email protected]> Signed-off-by: Keith Busch <[email protected]>
popcornmix
pushed a commit
that referenced
this issue
Nov 18, 2024
[ Upstream commit 782373b ] Commit 76d54bf ("nvme-tcp: don't access released socket during error recovery") added a mutex_lock() call for the queue->queue_lock in nvme_tcp_get_address(). However, the mutex_lock() races with mutex_destroy() in nvme_tcp_free_queue(), and causes the WARN below. DEBUG_LOCKS_WARN_ON(lock->magic != lock) WARNING: CPU: 3 PID: 34077 at kernel/locking/mutex.c:587 __mutex_lock+0xcf0/0x1220 Modules linked in: nvmet_tcp nvmet nvme_tcp nvme_fabrics iw_cm ib_cm ib_core pktcdvd nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables qrtr sunrpc ppdev 9pnet_virtio 9pnet pcspkr netfs parport_pc parport e1000 i2c_piix4 i2c_smbus loop fuse nfnetlink zram bochs drm_vram_helper drm_ttm_helper ttm drm_kms_helper xfs drm sym53c8xx floppy nvme scsi_transport_spi nvme_core nvme_auth serio_raw ata_generic pata_acpi dm_multipath qemu_fw_cfg [last unloaded: ib_uverbs] CPU: 3 UID: 0 PID: 34077 Comm: udisksd Not tainted 6.11.0-rc7 #319 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014 RIP: 0010:__mutex_lock+0xcf0/0x1220 Code: 08 84 d2 0f 85 c8 04 00 00 8b 15 ef b6 c8 01 85 d2 0f 85 78 f4 ff ff 48 c7 c6 20 93 ee af 48 c7 c7 60 91 ee af e8 f0 a7 6d fd <0f> 0b e9 5e f4 ff ff 48 b8 00 00 00 00 00 fc ff df 4c 89 f2 48 c1 RSP: 0018:ffff88811305f760 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff88812c652058 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000004 RDI: 0000000000000001 RBP: ffff88811305f8b0 R08: 0000000000000001 R09: ffffed1075c36341 R10: ffff8883ae1b1a0b R11: 0000000000010498 R12: 0000000000000000 R13: 0000000000000000 R14: dffffc0000000000 R15: ffff88812c652058 FS: 00007f9713ae4980(0000) GS:ffff8883ae180000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fcd78483c7c CR3: 0000000122c38000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? __warn.cold+0x5b/0x1af ? __mutex_lock+0xcf0/0x1220 ? report_bug+0x1ec/0x390 ? handle_bug+0x3c/0x80 ? exc_invalid_op+0x13/0x40 ? asm_exc_invalid_op+0x16/0x20 ? __mutex_lock+0xcf0/0x1220 ? nvme_tcp_get_address+0xc2/0x1e0 [nvme_tcp] ? __pfx___mutex_lock+0x10/0x10 ? __lock_acquire+0xd6a/0x59e0 ? nvme_tcp_get_address+0xc2/0x1e0 [nvme_tcp] nvme_tcp_get_address+0xc2/0x1e0 [nvme_tcp] ? __pfx_nvme_tcp_get_address+0x10/0x10 [nvme_tcp] nvme_sysfs_show_address+0x81/0xc0 [nvme_core] dev_attr_show+0x42/0x80 ? __asan_memset+0x1f/0x40 sysfs_kf_seq_show+0x1f0/0x370 seq_read_iter+0x2cb/0x1130 ? rw_verify_area+0x3b1/0x590 ? __mutex_lock+0x433/0x1220 vfs_read+0x6a6/0xa20 ? lockdep_hardirqs_on+0x78/0x100 ? __pfx_vfs_read+0x10/0x10 ksys_read+0xf7/0x1d0 ? __pfx_ksys_read+0x10/0x10 ? __x64_sys_openat+0x105/0x1d0 do_syscall_64+0x93/0x180 ? lockdep_hardirqs_on_prepare+0x16d/0x400 ? do_syscall_64+0x9f/0x180 ? lockdep_hardirqs_on+0x78/0x100 ? do_syscall_64+0x9f/0x180 ? __pfx_ksys_read+0x10/0x10 ? lockdep_hardirqs_on_prepare+0x16d/0x400 ? do_syscall_64+0x9f/0x180 ? lockdep_hardirqs_on+0x78/0x100 ? do_syscall_64+0x9f/0x180 ? lockdep_hardirqs_on_prepare+0x16d/0x400 ? do_syscall_64+0x9f/0x180 ? lockdep_hardirqs_on+0x78/0x100 ? do_syscall_64+0x9f/0x180 ? lockdep_hardirqs_on_prepare+0x16d/0x400 ? do_syscall_64+0x9f/0x180 ? lockdep_hardirqs_on+0x78/0x100 ? do_syscall_64+0x9f/0x180 ? lockdep_hardirqs_on_prepare+0x16d/0x400 ? do_syscall_64+0x9f/0x180 ? lockdep_hardirqs_on+0x78/0x100 ? do_syscall_64+0x9f/0x180 ? do_syscall_64+0x9f/0x180 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f9713f55cfa Code: 55 48 89 e5 48 83 ec 20 48 89 55 e8 48 89 75 f0 89 7d f8 e8 e8 74 f8 ff 48 8b 55 e8 48 8b 75 f0 41 89 c0 8b 7d f8 31 c0 0f 05 <48> 3d 00 f0 ff ff 77 2e 44 89 c7 48 89 45 f8 e8 42 75 f8 ff 48 8b RSP: 002b:00007ffd7f512e70 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 RAX: ffffffffffffffda RBX: 000055c38f316859 RCX: 00007f9713f55cfa RDX: 0000000000000fff RSI: 00007ffd7f512eb0 RDI: 0000000000000011 RBP: 00007ffd7f512e90 R08: 0000000000000000 R09: 00000000ffffffff R10: 0000000000000000 R11: 0000000000000246 R12: 000055c38f317148 R13: 0000000000000000 R14: 00007f96f4004f30 R15: 000055c3b6b623c0 </TASK> The WARN is observed when the blktests test case nvme/014 is repeated with tcp transport. It is rare, and 200 times repeat is required to recreate in some test environments. To avoid the WARN, check the NVME_TCP_Q_LIVE flag before locking queue->queue_lock. The flag is cleared long time before the lock gets destroyed. Signed-off-by: Hannes Reinecke <[email protected]> Signed-off-by: Shin'ichiro Kawasaki <[email protected]> Signed-off-by: Keith Busch <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
popcornmix
pushed a commit
that referenced
this issue
Nov 18, 2024
[ Upstream commit 782373b ] Commit 76d54bf ("nvme-tcp: don't access released socket during error recovery") added a mutex_lock() call for the queue->queue_lock in nvme_tcp_get_address(). However, the mutex_lock() races with mutex_destroy() in nvme_tcp_free_queue(), and causes the WARN below. DEBUG_LOCKS_WARN_ON(lock->magic != lock) WARNING: CPU: 3 PID: 34077 at kernel/locking/mutex.c:587 __mutex_lock+0xcf0/0x1220 Modules linked in: nvmet_tcp nvmet nvme_tcp nvme_fabrics iw_cm ib_cm ib_core pktcdvd nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables qrtr sunrpc ppdev 9pnet_virtio 9pnet pcspkr netfs parport_pc parport e1000 i2c_piix4 i2c_smbus loop fuse nfnetlink zram bochs drm_vram_helper drm_ttm_helper ttm drm_kms_helper xfs drm sym53c8xx floppy nvme scsi_transport_spi nvme_core nvme_auth serio_raw ata_generic pata_acpi dm_multipath qemu_fw_cfg [last unloaded: ib_uverbs] CPU: 3 UID: 0 PID: 34077 Comm: udisksd Not tainted 6.11.0-rc7 #319 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014 RIP: 0010:__mutex_lock+0xcf0/0x1220 Code: 08 84 d2 0f 85 c8 04 00 00 8b 15 ef b6 c8 01 85 d2 0f 85 78 f4 ff ff 48 c7 c6 20 93 ee af 48 c7 c7 60 91 ee af e8 f0 a7 6d fd <0f> 0b e9 5e f4 ff ff 48 b8 00 00 00 00 00 fc ff df 4c 89 f2 48 c1 RSP: 0018:ffff88811305f760 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff88812c652058 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000004 RDI: 0000000000000001 RBP: ffff88811305f8b0 R08: 0000000000000001 R09: ffffed1075c36341 R10: ffff8883ae1b1a0b R11: 0000000000010498 R12: 0000000000000000 R13: 0000000000000000 R14: dffffc0000000000 R15: ffff88812c652058 FS: 00007f9713ae4980(0000) GS:ffff8883ae180000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fcd78483c7c CR3: 0000000122c38000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? __warn.cold+0x5b/0x1af ? __mutex_lock+0xcf0/0x1220 ? report_bug+0x1ec/0x390 ? handle_bug+0x3c/0x80 ? exc_invalid_op+0x13/0x40 ? asm_exc_invalid_op+0x16/0x20 ? __mutex_lock+0xcf0/0x1220 ? nvme_tcp_get_address+0xc2/0x1e0 [nvme_tcp] ? __pfx___mutex_lock+0x10/0x10 ? __lock_acquire+0xd6a/0x59e0 ? nvme_tcp_get_address+0xc2/0x1e0 [nvme_tcp] nvme_tcp_get_address+0xc2/0x1e0 [nvme_tcp] ? __pfx_nvme_tcp_get_address+0x10/0x10 [nvme_tcp] nvme_sysfs_show_address+0x81/0xc0 [nvme_core] dev_attr_show+0x42/0x80 ? __asan_memset+0x1f/0x40 sysfs_kf_seq_show+0x1f0/0x370 seq_read_iter+0x2cb/0x1130 ? rw_verify_area+0x3b1/0x590 ? __mutex_lock+0x433/0x1220 vfs_read+0x6a6/0xa20 ? lockdep_hardirqs_on+0x78/0x100 ? __pfx_vfs_read+0x10/0x10 ksys_read+0xf7/0x1d0 ? __pfx_ksys_read+0x10/0x10 ? __x64_sys_openat+0x105/0x1d0 do_syscall_64+0x93/0x180 ? lockdep_hardirqs_on_prepare+0x16d/0x400 ? do_syscall_64+0x9f/0x180 ? lockdep_hardirqs_on+0x78/0x100 ? do_syscall_64+0x9f/0x180 ? __pfx_ksys_read+0x10/0x10 ? lockdep_hardirqs_on_prepare+0x16d/0x400 ? do_syscall_64+0x9f/0x180 ? lockdep_hardirqs_on+0x78/0x100 ? do_syscall_64+0x9f/0x180 ? lockdep_hardirqs_on_prepare+0x16d/0x400 ? do_syscall_64+0x9f/0x180 ? lockdep_hardirqs_on+0x78/0x100 ? do_syscall_64+0x9f/0x180 ? lockdep_hardirqs_on_prepare+0x16d/0x400 ? do_syscall_64+0x9f/0x180 ? lockdep_hardirqs_on+0x78/0x100 ? do_syscall_64+0x9f/0x180 ? lockdep_hardirqs_on_prepare+0x16d/0x400 ? do_syscall_64+0x9f/0x180 ? lockdep_hardirqs_on+0x78/0x100 ? do_syscall_64+0x9f/0x180 ? do_syscall_64+0x9f/0x180 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f9713f55cfa Code: 55 48 89 e5 48 83 ec 20 48 89 55 e8 48 89 75 f0 89 7d f8 e8 e8 74 f8 ff 48 8b 55 e8 48 8b 75 f0 41 89 c0 8b 7d f8 31 c0 0f 05 <48> 3d 00 f0 ff ff 77 2e 44 89 c7 48 89 45 f8 e8 42 75 f8 ff 48 8b RSP: 002b:00007ffd7f512e70 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 RAX: ffffffffffffffda RBX: 000055c38f316859 RCX: 00007f9713f55cfa RDX: 0000000000000fff RSI: 00007ffd7f512eb0 RDI: 0000000000000011 RBP: 00007ffd7f512e90 R08: 0000000000000000 R09: 00000000ffffffff R10: 0000000000000000 R11: 0000000000000246 R12: 000055c38f317148 R13: 0000000000000000 R14: 00007f96f4004f30 R15: 000055c3b6b623c0 </TASK> The WARN is observed when the blktests test case nvme/014 is repeated with tcp transport. It is rare, and 200 times repeat is required to recreate in some test environments. To avoid the WARN, check the NVME_TCP_Q_LIVE flag before locking queue->queue_lock. The flag is cleared long time before the lock gets destroyed. Signed-off-by: Hannes Reinecke <[email protected]> Signed-off-by: Shin'ichiro Kawasaki <[email protected]> Signed-off-by: Keith Busch <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Hey~
I have problem compiling. I compiled with the page for my touchscreen with the page:
http://engineering-diy.blogspot.tw/2013/01/adding-7inch-display-with-touchscreen.html
Then, I met problem with the ftdi ft232 usb-serial converter hang. Then, I rpi-updated to fix the ftdi ft232 hang problem.
Here I cant find a way to fix these two problem the same time.
How can I compile a version with the newest kernel version?
Thx
The text was updated successfully, but these errors were encountered: