Update Synopsys USB OTG driver to v2.94a and disable CRYPTOLIB. Third attempt #85

ddv2005 · 2012-08-15T19:28:51Z

No description provided.

Update Synopsys USB OTG driver to v2.94a and disable CRYPTOLIB. Third attempt

popcornmix · 2012-08-15T19:39:05Z

I've been playing with your earlier pull request and it seemed good. I'll push out a kernel build later tonight and see what the response is.

I did find iperf is nearly 10% faster after the update, so there is some benefit. Hopefully some bugs are squashed.

Thanks a lot for the effort you've put in.

@clk

commit 72b5322 upstream. The @cn is stay in @clk_notifier_list after it is freed, it cause memory corruption. Example, if @clk is registered(first), unregistered(first), registered(second), unregistered(second). The freed @cn will be used when @clk is registered(second), and the bug will be happened when @clk is unregistered(second): [ 517.040000] clk_notif_dbg clk_notif_dbg.1: clk_notifier_unregister() [ 517.040000] Unable to handle kernel paging request at virtual address 00df3008 [ 517.050000] pgd = ed858000 [ 517.050000] [00df3008] *pgd=00000000 [ 517.060000] Internal error: Oops: 5 [#1] PREEMPT SMP ARM [ 517.060000] Modules linked in: clk_notif_dbg(O-) [last unloaded: clk_notif_dbg] [ 517.060000] CPU: 1 PID: 499 Comm: modprobe Tainted: G O 3.10.0-rc3-00119-ga93cb29-dirty #85 [ 517.060000] task: ee1e0180 ti: ee3e6000 task.ti: ee3e6000 [ 517.060000] PC is at srcu_readers_seq_idx+0x48/0x84 [ 517.060000] LR is at srcu_readers_seq_idx+0x60/0x84 [ 517.060000] pc : [<c0052720>] lr : [<c0052738>] psr: 80070013 [ 517.060000] sp : ee3e7d48 ip : 00000000 fp : ee3e7d6c [ 517.060000] r10: 00000000 r9 : ee3e6000 r8 : 00000000 [ 517.060000] r7 : ed84fe4c r6 : c068ec90 r5 : c068e430 r4 : 00000000 [ 517.060000] r3 : 00df3000 r2 : 00000000 r1 : 00000002 r0 : 00000000 [ 517.060000] Flags: Nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user [ 517.060000] Control: 18c5387d Table: 2d85804a DAC: 00000015 [ 517.060000] Process modprobe (pid: 499, stack limit = 0xee3e6238) [ 517.060000] Stack: (0xee3e7d48 to 0xee3e8000) .... [ 517.060000] [<c0052720>] (srcu_readers_seq_idx+0x48/0x84) from [<c0052790>] (try_check_zero+0x34/0xfc) [ 517.060000] [<c0052790>] (try_check_zero+0x34/0xfc) from [<c00528b0>] (srcu_advance_batches+0x58/0x114) [ 517.060000] [<c00528b0>] (srcu_advance_batches+0x58/0x114) from [<c0052c30>] (__synchronize_srcu+0x114/0x1ac) [ 517.060000] [<c0052c30>] (__synchronize_srcu+0x114/0x1ac) from [<c0052d14>] (synchronize_srcu+0x2c/0x34) [ 517.060000] [<c0052d14>] (synchronize_srcu+0x2c/0x34) from [<c0053a08>] (srcu_notifier_chain_unregister+0x68/0x74) [ 517.060000] [<c0053a08>] (srcu_notifier_chain_unregister+0x68/0x74) from [<c0375a78>] (clk_notifier_unregister+0x7c/0xc0) [ 517.060000] [<c0375a78>] (clk_notifier_unregister+0x7c/0xc0) from [<bf008034>] (clk_notif_dbg_remove+0x34/0x9c [clk_notif_dbg]) [ 517.060000] [<bf008034>] (clk_notif_dbg_remove+0x34/0x9c [clk_notif_dbg]) from [<c02bb974>] (platform_drv_remove+0x24/0x28) [ 517.060000] [<c02bb974>] (platform_drv_remove+0x24/0x28) from [<c02b9bf8>] (__device_release_driver+0x8c/0xd4) [ 517.060000] [<c02b9bf8>] (__device_release_driver+0x8c/0xd4) from [<c02ba680>] (driver_detach+0x9c/0xc4) [ 517.060000] [<c02ba680>] (driver_detach+0x9c/0xc4) from [<c02b99c4>] (bus_remove_driver+0xcc/0xfc) [ 517.060000] [<c02b99c4>] (bus_remove_driver+0xcc/0xfc) from [<c02bace4>] (driver_unregister+0x54/0x78) [ 517.060000] [<c02bace4>] (driver_unregister+0x54/0x78) from [<c02bbb44>] (platform_driver_unregister+0x1c/0x20) [ 517.060000] [<c02bbb44>] (platform_driver_unregister+0x1c/0x20) from [<bf0081f8>] (clk_notif_dbg_driver_exit+0x14/0x1c [clk_notif_dbg]) [ 517.060000] [<bf0081f8>] (clk_notif_dbg_driver_exit+0x14/0x1c [clk_notif_dbg]) from [<c00835e4>] (SyS_delete_module+0x200/0x28c) [ 517.060000] [<c00835e4>] (SyS_delete_module+0x200/0x28c) from [<c000edc0>] (ret_fast_syscall+0x0/0x48) [ 517.060000] Code: e5973004 e7911102 e0833001 e2881002 (e7933101) Reported-by: Sören Brinkmann <[email protected]> Signed-off-by: Lai Jiangshan <[email protected]> Tested-by: Sören Brinkmann <[email protected]> Signed-off-by: Mike Turquette <[email protected]> [[email protected]: shortened $SUBJECT] Signed-off-by: Greg Kroah-Hartman <[email protected]>

@clk

The @cn is stay in @clk_notifier_list after it is freed, it cause memory corruption. Example, if @clk is registered(first), unregistered(first), registered(second), unregistered(second). The freed @cn will be used when @clk is registered(second), and the bug will be happened when @clk is unregistered(second): [ 517.040000] clk_notif_dbg clk_notif_dbg.1: clk_notifier_unregister() [ 517.040000] Unable to handle kernel paging request at virtual address 00df3008 [ 517.050000] pgd = ed858000 [ 517.050000] [00df3008] *pgd=00000000 [ 517.060000] Internal error: Oops: 5 [#1] PREEMPT SMP ARM [ 517.060000] Modules linked in: clk_notif_dbg(O-) [last unloaded: clk_notif_dbg] [ 517.060000] CPU: 1 PID: 499 Comm: modprobe Tainted: G O 3.10.0-rc3-00119-ga93cb29-dirty #85 [ 517.060000] task: ee1e0180 ti: ee3e6000 task.ti: ee3e6000 [ 517.060000] PC is at srcu_readers_seq_idx+0x48/0x84 [ 517.060000] LR is at srcu_readers_seq_idx+0x60/0x84 [ 517.060000] pc : [<c0052720>] lr : [<c0052738>] psr: 80070013 [ 517.060000] sp : ee3e7d48 ip : 00000000 fp : ee3e7d6c [ 517.060000] r10: 00000000 r9 : ee3e6000 r8 : 00000000 [ 517.060000] r7 : ed84fe4c r6 : c068ec90 r5 : c068e430 r4 : 00000000 [ 517.060000] r3 : 00df3000 r2 : 00000000 r1 : 00000002 r0 : 00000000 [ 517.060000] Flags: Nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user [ 517.060000] Control: 18c5387d Table: 2d85804a DAC: 00000015 [ 517.060000] Process modprobe (pid: 499, stack limit = 0xee3e6238) [ 517.060000] Stack: (0xee3e7d48 to 0xee3e8000) .... [ 517.060000] [<c0052720>] (srcu_readers_seq_idx+0x48/0x84) from [<c0052790>] (try_check_zero+0x34/0xfc) [ 517.060000] [<c0052790>] (try_check_zero+0x34/0xfc) from [<c00528b0>] (srcu_advance_batches+0x58/0x114) [ 517.060000] [<c00528b0>] (srcu_advance_batches+0x58/0x114) from [<c0052c30>] (__synchronize_srcu+0x114/0x1ac) [ 517.060000] [<c0052c30>] (__synchronize_srcu+0x114/0x1ac) from [<c0052d14>] (synchronize_srcu+0x2c/0x34) [ 517.060000] [<c0052d14>] (synchronize_srcu+0x2c/0x34) from [<c0053a08>] (srcu_notifier_chain_unregister+0x68/0x74) [ 517.060000] [<c0053a08>] (srcu_notifier_chain_unregister+0x68/0x74) from [<c0375a78>] (clk_notifier_unregister+0x7c/0xc0) [ 517.060000] [<c0375a78>] (clk_notifier_unregister+0x7c/0xc0) from [<bf008034>] (clk_notif_dbg_remove+0x34/0x9c [clk_notif_dbg]) [ 517.060000] [<bf008034>] (clk_notif_dbg_remove+0x34/0x9c [clk_notif_dbg]) from [<c02bb974>] (platform_drv_remove+0x24/0x28) [ 517.060000] [<c02bb974>] (platform_drv_remove+0x24/0x28) from [<c02b9bf8>] (__device_release_driver+0x8c/0xd4) [ 517.060000] [<c02b9bf8>] (__device_release_driver+0x8c/0xd4) from [<c02ba680>] (driver_detach+0x9c/0xc4) [ 517.060000] [<c02ba680>] (driver_detach+0x9c/0xc4) from [<c02b99c4>] (bus_remove_driver+0xcc/0xfc) [ 517.060000] [<c02b99c4>] (bus_remove_driver+0xcc/0xfc) from [<c02bace4>] (driver_unregister+0x54/0x78) [ 517.060000] [<c02bace4>] (driver_unregister+0x54/0x78) from [<c02bbb44>] (platform_driver_unregister+0x1c/0x20) [ 517.060000] [<c02bbb44>] (platform_driver_unregister+0x1c/0x20) from [<bf0081f8>] (clk_notif_dbg_driver_exit+0x14/0x1c [clk_notif_dbg]) [ 517.060000] [<bf0081f8>] (clk_notif_dbg_driver_exit+0x14/0x1c [clk_notif_dbg]) from [<c00835e4>] (SyS_delete_module+0x200/0x28c) [ 517.060000] [<c00835e4>] (SyS_delete_module+0x200/0x28c) from [<c000edc0>] (ret_fast_syscall+0x0/0x48) [ 517.060000] Code: e5973004 e7911102 e0833001 e2881002 (e7933101) Cc: [email protected] Reported-by: Sören Brinkmann <[email protected]> Signed-off-by: Lai Jiangshan <[email protected]> Tested-by: Sören Brinkmann <[email protected]> Signed-off-by: Mike Turquette <[email protected]> [[email protected]: shortened $SUBJECT]

commit 391acf9 upstream. When runing with the kernel(3.15-rc7+), the follow bug occurs: [ 9969.258987] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:586 [ 9969.359906] in_atomic(): 1, irqs_disabled(): 0, pid: 160655, name: python [ 9969.441175] INFO: lockdep is turned off. [ 9969.488184] CPU: 26 PID: 160655 Comm: python Tainted: G A 3.15.0-rc7+ #85 [ 9969.581032] Hardware name: FUJITSU-SV PRIMEQUEST 1800E/SB, BIOS PRIMEQUEST 1000 Series BIOS Version 1.39 11/16/2012 [ 9969.706052] ffffffff81a20e60 ffff8803e941fbd0 ffffffff8162f523 ffff8803e941fd18 [ 9969.795323] ffff8803e941fbe0 ffffffff8109995a ffff8803e941fc58 ffffffff81633e6c [ 9969.884710] ffffffff811ba5dc ffff880405c6b480 ffff88041fdd90a0 0000000000002000 [ 9969.974071] Call Trace: [ 9970.003403] [<ffffffff8162f523>] dump_stack+0x4d/0x66 [ 9970.065074] [<ffffffff8109995a>] __might_sleep+0xfa/0x130 [ 9970.130743] [<ffffffff81633e6c>] mutex_lock_nested+0x3c/0x4f0 [ 9970.200638] [<ffffffff811ba5dc>] ? kmem_cache_alloc+0x1bc/0x210 [ 9970.272610] [<ffffffff81105807>] cpuset_mems_allowed+0x27/0x140 [ 9970.344584] [<ffffffff811b1303>] ? __mpol_dup+0x63/0x150 [ 9970.409282] [<ffffffff811b1385>] __mpol_dup+0xe5/0x150 [ 9970.471897] [<ffffffff811b1303>] ? __mpol_dup+0x63/0x150 [ 9970.536585] [<ffffffff81068c86>] ? copy_process.part.23+0x606/0x1d40 [ 9970.613763] [<ffffffff810bf28d>] ? trace_hardirqs_on+0xd/0x10 [ 9970.683660] [<ffffffff810ddddf>] ? monotonic_to_bootbased+0x2f/0x50 [ 9970.759795] [<ffffffff81068cf0>] copy_process.part.23+0x670/0x1d40 [ 9970.834885] [<ffffffff8106a598>] do_fork+0xd8/0x380 [ 9970.894375] [<ffffffff81110e4c>] ? __audit_syscall_entry+0x9c/0xf0 [ 9970.969470] [<ffffffff8106a8c6>] SyS_clone+0x16/0x20 [ 9971.030011] [<ffffffff81642009>] stub_clone+0x69/0x90 [ 9971.091573] [<ffffffff81641c29>] ? system_call_fastpath+0x16/0x1b The cause is that cpuset_mems_allowed() try to take mutex_lock(&callback_mutex) under the rcu_read_lock(which was hold in __mpol_dup()). And in cpuset_mems_allowed(), the access to cpuset is under rcu_read_lock, so in __mpol_dup, we can reduce the rcu_read_lock protection region to protect the access to cpuset only in current_cpuset_is_being_rebound(). So that we can avoid this bug. This patch is a temporary solution that just addresses the bug mentioned above, can not fix the long-standing issue about cpuset.mems rebinding on fork(): "When the forker's task_struct is duplicated (which includes ->mems_allowed) and it races with an update to cpuset_being_rebound in update_tasks_nodemask() then the task's mems_allowed doesn't get updated. And the child task's mems_allowed can be wrong if the cpuset's nodemask changes before the child has been added to the cgroup's tasklist." Signed-off-by: Gu Zheng <[email protected]> Acked-by: Li Zefan <[email protected]> Signed-off-by: Tejun Heo <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 391acf9 upstream. When runing with the kernel(3.15-rc7+), the follow bug occurs: [ 9969.258987] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:586 [ 9969.359906] in_atomic(): 1, irqs_disabled(): 0, pid: 160655, name: python [ 9969.441175] INFO: lockdep is turned off. [ 9969.488184] CPU: 26 PID: 160655 Comm: python Tainted: G A 3.15.0-rc7+ #85 [ 9969.581032] Hardware name: FUJITSU-SV PRIMEQUEST 1800E/SB, BIOS PRIMEQUEST 1000 Series BIOS Version 1.39 11/16/2012 [ 9969.706052] ffffffff81a20e60 ffff8803e941fbd0 ffffffff8162f523 ffff8803e941fd18 [ 9969.795323] ffff8803e941fbe0 ffffffff8109995a ffff8803e941fc58 ffffffff81633e6c [ 9969.884710] ffffffff811ba5dc ffff880405c6b480 ffff88041fdd90a0 0000000000002000 [ 9969.974071] Call Trace: [ 9970.003403] [<ffffffff8162f523>] dump_stack+0x4d/0x66 [ 9970.065074] [<ffffffff8109995a>] __might_sleep+0xfa/0x130 [ 9970.130743] [<ffffffff81633e6c>] mutex_lock_nested+0x3c/0x4f0 [ 9970.200638] [<ffffffff811ba5dc>] ? kmem_cache_alloc+0x1bc/0x210 [ 9970.272610] [<ffffffff81105807>] cpuset_mems_allowed+0x27/0x140 [ 9970.344584] [<ffffffff811b1303>] ? __mpol_dup+0x63/0x150 [ 9970.409282] [<ffffffff811b1385>] __mpol_dup+0xe5/0x150 [ 9970.471897] [<ffffffff811b1303>] ? __mpol_dup+0x63/0x150 [ 9970.536585] [<ffffffff81068c86>] ? copy_process.part.23+0x606/0x1d40 [ 9970.613763] [<ffffffff810bf28d>] ? trace_hardirqs_on+0xd/0x10 [ 9970.683660] [<ffffffff810ddddf>] ? monotonic_to_bootbased+0x2f/0x50 [ 9970.759795] [<ffffffff81068cf0>] copy_process.part.23+0x670/0x1d40 [ 9970.834885] [<ffffffff8106a598>] do_fork+0xd8/0x380 [ 9970.894375] [<ffffffff81110e4c>] ? __audit_syscall_entry+0x9c/0xf0 [ 9970.969470] [<ffffffff8106a8c6>] SyS_clone+0x16/0x20 [ 9971.030011] [<ffffffff81642009>] stub_clone+0x69/0x90 [ 9971.091573] [<ffffffff81641c29>] ? system_call_fastpath+0x16/0x1b The cause is that cpuset_mems_allowed() try to take mutex_lock(&callback_mutex) under the rcu_read_lock(which was hold in __mpol_dup()). And in cpuset_mems_allowed(), the access to cpuset is under rcu_read_lock, so in __mpol_dup, we can reduce the rcu_read_lock protection region to protect the access to cpuset only in current_cpuset_is_being_rebound(). So that we can avoid this bug. This patch is a temporary solution that just addresses the bug mentioned above, can not fix the long-standing issue about cpuset.mems rebinding on fork(): "When the forker's task_struct is duplicated (which includes ->mems_allowed) and it races with an update to cpuset_being_rebound in update_tasks_nodemask() then the task's mems_allowed doesn't get updated. And the child task's mems_allowed can be wrong if the cpuset's nodemask changes before the child has been added to the cgroup's tasklist." Signed-off-by: Gu Zheng <[email protected]> Acked-by: Li Zefan <[email protected]> Signed-off-by: Tejun Heo <[email protected]> Signed-off-by: Jiri Slaby <[email protected]>

When runing with the kernel(3.15-rc7+), the follow bug occurs: [ 9969.258987] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:586 [ 9969.359906] in_atomic(): 1, irqs_disabled(): 0, pid: 160655, name: python [ 9969.441175] INFO: lockdep is turned off. [ 9969.488184] CPU: 26 PID: 160655 Comm: python Tainted: G A 3.15.0-rc7+ #85 [ 9969.581032] Hardware name: FUJITSU-SV PRIMEQUEST 1800E/SB, BIOS PRIMEQUEST 1000 Series BIOS Version 1.39 11/16/2012 [ 9969.706052] ffffffff81a20e60 ffff8803e941fbd0 ffffffff8162f523 ffff8803e941fd18 [ 9969.795323] ffff8803e941fbe0 ffffffff8109995a ffff8803e941fc58 ffffffff81633e6c [ 9969.884710] ffffffff811ba5dc ffff880405c6b480 ffff88041fdd90a0 0000000000002000 [ 9969.974071] Call Trace: [ 9970.003403] [<ffffffff8162f523>] dump_stack+0x4d/0x66 [ 9970.065074] [<ffffffff8109995a>] __might_sleep+0xfa/0x130 [ 9970.130743] [<ffffffff81633e6c>] mutex_lock_nested+0x3c/0x4f0 [ 9970.200638] [<ffffffff811ba5dc>] ? kmem_cache_alloc+0x1bc/0x210 [ 9970.272610] [<ffffffff81105807>] cpuset_mems_allowed+0x27/0x140 [ 9970.344584] [<ffffffff811b1303>] ? __mpol_dup+0x63/0x150 [ 9970.409282] [<ffffffff811b1385>] __mpol_dup+0xe5/0x150 [ 9970.471897] [<ffffffff811b1303>] ? __mpol_dup+0x63/0x150 [ 9970.536585] [<ffffffff81068c86>] ? copy_process.part.23+0x606/0x1d40 [ 9970.613763] [<ffffffff810bf28d>] ? trace_hardirqs_on+0xd/0x10 [ 9970.683660] [<ffffffff810ddddf>] ? monotonic_to_bootbased+0x2f/0x50 [ 9970.759795] [<ffffffff81068cf0>] copy_process.part.23+0x670/0x1d40 [ 9970.834885] [<ffffffff8106a598>] do_fork+0xd8/0x380 [ 9970.894375] [<ffffffff81110e4c>] ? __audit_syscall_entry+0x9c/0xf0 [ 9970.969470] [<ffffffff8106a8c6>] SyS_clone+0x16/0x20 [ 9971.030011] [<ffffffff81642009>] stub_clone+0x69/0x90 [ 9971.091573] [<ffffffff81641c29>] ? system_call_fastpath+0x16/0x1b The cause is that cpuset_mems_allowed() try to take mutex_lock(&callback_mutex) under the rcu_read_lock(which was hold in __mpol_dup()). And in cpuset_mems_allowed(), the access to cpuset is under rcu_read_lock, so in __mpol_dup, we can reduce the rcu_read_lock protection region to protect the access to cpuset only in current_cpuset_is_being_rebound(). So that we can avoid this bug. This patch is a temporary solution that just addresses the bug mentioned above, can not fix the long-standing issue about cpuset.mems rebinding on fork(): "When the forker's task_struct is duplicated (which includes ->mems_allowed) and it races with an update to cpuset_being_rebound in update_tasks_nodemask() then the task's mems_allowed doesn't get updated. And the child task's mems_allowed can be wrong if the cpuset's nodemask changes before the child has been added to the cgroup's tasklist." Signed-off-by: Gu Zheng <[email protected]> Acked-by: Li Zefan <[email protected]> Signed-off-by: Tejun Heo <[email protected]> Cc: stable <[email protected]>

commit 391acf9 upstream. When runing with the kernel(3.15-rc7+), the follow bug occurs: [ 9969.258987] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:586 [ 9969.359906] in_atomic(): 1, irqs_disabled(): 0, pid: 160655, name: python [ 9969.441175] INFO: lockdep is turned off. [ 9969.488184] CPU: 26 PID: 160655 Comm: python Tainted: G A 3.15.0-rc7+ #85 [ 9969.581032] Hardware name: FUJITSU-SV PRIMEQUEST 1800E/SB, BIOS PRIMEQUEST 1000 Series BIOS Version 1.39 11/16/2012 [ 9969.706052] ffffffff81a20e60 ffff8803e941fbd0 ffffffff8162f523 ffff8803e941fd18 [ 9969.795323] ffff8803e941fbe0 ffffffff8109995a ffff8803e941fc58 ffffffff81633e6c [ 9969.884710] ffffffff811ba5dc ffff880405c6b480 ffff88041fdd90a0 0000000000002000 [ 9969.974071] Call Trace: [ 9970.003403] [<ffffffff8162f523>] dump_stack+0x4d/0x66 [ 9970.065074] [<ffffffff8109995a>] __might_sleep+0xfa/0x130 [ 9970.130743] [<ffffffff81633e6c>] mutex_lock_nested+0x3c/0x4f0 [ 9970.200638] [<ffffffff811ba5dc>] ? kmem_cache_alloc+0x1bc/0x210 [ 9970.272610] [<ffffffff81105807>] cpuset_mems_allowed+0x27/0x140 [ 9970.344584] [<ffffffff811b1303>] ? __mpol_dup+0x63/0x150 [ 9970.409282] [<ffffffff811b1385>] __mpol_dup+0xe5/0x150 [ 9970.471897] [<ffffffff811b1303>] ? __mpol_dup+0x63/0x150 [ 9970.536585] [<ffffffff81068c86>] ? copy_process.part.23+0x606/0x1d40 [ 9970.613763] [<ffffffff810bf28d>] ? trace_hardirqs_on+0xd/0x10 [ 9970.683660] [<ffffffff810ddddf>] ? monotonic_to_bootbased+0x2f/0x50 [ 9970.759795] [<ffffffff81068cf0>] copy_process.part.23+0x670/0x1d40 [ 9970.834885] [<ffffffff8106a598>] do_fork+0xd8/0x380 [ 9970.894375] [<ffffffff81110e4c>] ? __audit_syscall_entry+0x9c/0xf0 [ 9970.969470] [<ffffffff8106a8c6>] SyS_clone+0x16/0x20 [ 9971.030011] [<ffffffff81642009>] stub_clone+0x69/0x90 [ 9971.091573] [<ffffffff81641c29>] ? system_call_fastpath+0x16/0x1b The cause is that cpuset_mems_allowed() try to take mutex_lock(&callback_mutex) under the rcu_read_lock(which was hold in __mpol_dup()). And in cpuset_mems_allowed(), the access to cpuset is under rcu_read_lock, so in __mpol_dup, we can reduce the rcu_read_lock protection region to protect the access to cpuset only in current_cpuset_is_being_rebound(). So that we can avoid this bug. This patch is a temporary solution that just addresses the bug mentioned above, can not fix the long-standing issue about cpuset.mems rebinding on fork(): "When the forker's task_struct is duplicated (which includes ->mems_allowed) and it races with an update to cpuset_being_rebound in update_tasks_nodemask() then the task's mems_allowed doesn't get updated. And the child task's mems_allowed can be wrong if the cpuset's nodemask changes before the child has been added to the cgroup's tasklist." Signed-off-by: Gu Zheng <[email protected]> Acked-by: Li Zefan <[email protected]> Signed-off-by: Tejun Heo <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

This is due to commit 86839c5 "xen/block: add multi-page ring support" When using an guest under UEFI - after the domain is destroyed the following warning comes from blkback. ------------[ cut here ]------------ WARNING: CPU: 2 PID: 95 at /home/julien/works/linux/drivers/block/xen-blkback/xenbus.c:274 xen_blkif_deferred_free+0x1f4/0x1f8() Modules linked in: CPU: 2 PID: 95 Comm: kworker/2:1 Tainted: G W 4.2.0 #85 Hardware name: APM X-Gene Mustang board (DT) Workqueue: events xen_blkif_deferred_free Call trace: [<ffff8000000890a8>] dump_backtrace+0x0/0x124 [<ffff8000000891dc>] show_stack+0x10/0x1c [<ffff8000007653bc>] dump_stack+0x78/0x98 [<ffff800000097e88>] warn_slowpath_common+0x9c/0xd4 [<ffff800000097f80>] warn_slowpath_null+0x14/0x20 [<ffff800000557a0c>] xen_blkif_deferred_free+0x1f0/0x1f8 [<ffff8000000ad020>] process_one_work+0x160/0x3b4 [<ffff8000000ad3b4>] worker_thread+0x140/0x494 [<ffff8000000b2e34>] kthread+0xd8/0xf0 ---[ end trace 6f859b7883c88cdd ]--- Request allocation has been moved to connect_ring, which is called every time blkback connects to the frontend (this can happen multiple times during a blkback instance life cycle). On the other hand, request freeing has not been moved, so it's only called when destroying the backend instance. Due to this mismatch, blkback can allocate the request pool multiple times, without freeing it. In order to fix it, move the freeing of requests to xen_blkif_disconnect to restore the symmetry between request allocation and freeing. Reported-by: Julien Grall <[email protected]> Signed-off-by: Roger Pau Monné <[email protected]> Tested-by: Julien Grall <[email protected]> Cc: Konrad Rzeszutek Wilk <[email protected]> Cc: Boris Ostrovsky <[email protected]> Cc: David Vrabel <[email protected]> Cc: [email protected] CC: [email protected] # 4.2 Signed-off-by: Konrad Rzeszutek Wilk <[email protected]>

commit f929d42 upstream. This is due to commit 86839c5 "xen/block: add multi-page ring support" When using an guest under UEFI - after the domain is destroyed the following warning comes from blkback. ------------[ cut here ]------------ WARNING: CPU: 2 PID: 95 at /home/julien/works/linux/drivers/block/xen-blkback/xenbus.c:274 xen_blkif_deferred_free+0x1f4/0x1f8() Modules linked in: CPU: 2 PID: 95 Comm: kworker/2:1 Tainted: G W 4.2.0 #85 Hardware name: APM X-Gene Mustang board (DT) Workqueue: events xen_blkif_deferred_free Call trace: [<ffff8000000890a8>] dump_backtrace+0x0/0x124 [<ffff8000000891dc>] show_stack+0x10/0x1c [<ffff8000007653bc>] dump_stack+0x78/0x98 [<ffff800000097e88>] warn_slowpath_common+0x9c/0xd4 [<ffff800000097f80>] warn_slowpath_null+0x14/0x20 [<ffff800000557a0c>] xen_blkif_deferred_free+0x1f0/0x1f8 [<ffff8000000ad020>] process_one_work+0x160/0x3b4 [<ffff8000000ad3b4>] worker_thread+0x140/0x494 [<ffff8000000b2e34>] kthread+0xd8/0xf0 ---[ end trace 6f859b7883c88cdd ]--- Request allocation has been moved to connect_ring, which is called every time blkback connects to the frontend (this can happen multiple times during a blkback instance life cycle). On the other hand, request freeing has not been moved, so it's only called when destroying the backend instance. Due to this mismatch, blkback can allocate the request pool multiple times, without freeing it. In order to fix it, move the freeing of requests to xen_blkif_disconnect to restore the symmetry between request allocation and freeing. Reported-by: Julien Grall <[email protected]> Signed-off-by: Roger Pau Monné <[email protected]> Tested-by: Julien Grall <[email protected]> Cc: Konrad Rzeszutek Wilk <[email protected]> Cc: Boris Ostrovsky <[email protected]> Cc: David Vrabel <[email protected]> Cc: [email protected] Signed-off-by: Konrad Rzeszutek Wilk <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit aa0ab02 ] On the 8xx, the page size is set in the PMD entry and applies to all pages of the page table pointed by the said PMD entry. When an app has some regular pages allocated (e.g. see below) and tries to mmap() a huge page at a hint address covered by the same PMD entry, the kernel accepts the hint allthough the 8xx cannot handle different page sizes in the same PMD entry. 10000000-10001000 r-xp 00000000 00:0f 2597 /root/malloc 10010000-10011000 rwxp 00000000 00:0f 2597 /root/malloc mmap(0x10080000, 524288, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS|0x40000, -1, 0) = 0x10080000 This results the app remaining forever in do_page_fault()/hugetlb_fault() and when interrupting that app, we get the following warning: [162980.035629] WARNING: CPU: 0 PID: 2777 at arch/powerpc/mm/hugetlbpage.c:354 hugetlb_free_pgd_range+0xc8/0x1e4 [162980.035699] CPU: 0 PID: 2777 Comm: malloc Tainted: G W 4.14.6 #85 [162980.035744] task: c67e2c00 task.stack: c668e000 [162980.035783] NIP: c000fe18 LR: c00e1eec CTR: c00f90c0 [162980.035830] REGS: c668fc20 TRAP: 0700 Tainted: G W (4.14.6) [162980.035854] MSR: 00029032 <EE,ME,IR,DR,RI> CR: 24044224 XER: 20000000 [162980.036003] [162980.036003] GPR00: c00e1eec c668fcd0 c67e2c00 00000010 c6869410 10080000 00000000 77fb4000 [162980.036003] GPR08: ffff0001 0683c001 00000000 ffffff80 44028228 10018a34 00004008 418004fc [162980.036003] GPR16: c668e000 00040100 c668e000 c06c0000 c668fe78 c668e000 c6835ba0 c668fd48 [162980.036003] GPR24: 00000000 73ffffff 74000000 00000001 77fb4000 100fffff 10100000 10100000 [162980.036743] NIP [c000fe18] hugetlb_free_pgd_range+0xc8/0x1e4 [162980.036839] LR [c00e1eec] free_pgtables+0x12c/0x150 [162980.036861] Call Trace: [162980.036939] [c668fcd0] [c00f0774] unlink_anon_vmas+0x1c4/0x214 (unreliable) [162980.037040] [c668fd10] [c00e1eec] free_pgtables+0x12c/0x150 [162980.037118] [c668fd40] [c00eabac] exit_mmap+0xe8/0x1b4 [162980.037210] [c668fda0] [c0019710] mmput.part.9+0x20/0xd8 [162980.037301] [c668fdb0] [c001ecb0] do_exit+0x1f0/0x93c [162980.037386] [c668fe00] [c001f478] do_group_exit+0x40/0xcc [162980.037479] [c668fe10] [c002a76c] get_signal+0x47c/0x614 [162980.037570] [c668fe70] [c0007840] do_signal+0x54/0x244 [162980.037654] [c668ff30] [c0007ae8] do_notify_resume+0x34/0x88 [162980.037744] [c668ff40] [c000dae8] do_user_signal+0x74/0xc4 [162980.037781] Instruction dump: [162980.037821] 7fdff378 81370000 54a3463a 80890020 7d24182e 7c841a14 712a0004 4082ff94 [162980.038014] 2f890000 419e0010 712a0ff0 408200e0 <0fe00000> 54a9000a 7f984840 419d0094 [162980.038216] ---[ end trace c0ceeca8e7a5800a ]--- [162980.038754] BUG: non-zero nr_ptes on freeing mm: 1 [162985.363322] BUG: non-zero nr_ptes on freeing mm: -1 In order to fix this, this patch uses the address space "slices" implemented for BOOK3S/64 and enhanced to support PPC32 by the preceding patch. This patch modifies the context.id on the 8xx to be in the range [1:16] instead of [0:15] in order to identify context.id == 0 as not initialised contexts as done on BOOK3S This patch activates CONFIG_PPC_MM_SLICES when CONFIG_HUGETLB_PAGE is selected for the 8xx Alltough we could in theory have as many slices as PMD entries, the current slices implementation limits the number of low slices to 16. This limitation is not preventing us to fix the initial issue allthough it is suboptimal. It will be cured in a subsequent patch. Fixes: 4b91428 ("powerpc/8xx: Implement support of hugepages") Signed-off-by: Christophe Leroy <[email protected]> Reviewed-by: Aneesh Kumar K.V <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit aa0ab02 upstream. On the 8xx, the page size is set in the PMD entry and applies to all pages of the page table pointed by the said PMD entry. When an app has some regular pages allocated (e.g. see below) and tries to mmap() a huge page at a hint address covered by the same PMD entry, the kernel accepts the hint allthough the 8xx cannot handle different page sizes in the same PMD entry. 10000000-10001000 r-xp 00000000 00:0f 2597 /root/malloc 10010000-10011000 rwxp 00000000 00:0f 2597 /root/malloc mmap(0x10080000, 524288, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS|0x40000, -1, 0) = 0x10080000 This results the app remaining forever in do_page_fault()/hugetlb_fault() and when interrupting that app, we get the following warning: [162980.035629] WARNING: CPU: 0 PID: 2777 at arch/powerpc/mm/hugetlbpage.c:354 hugetlb_free_pgd_range+0xc8/0x1e4 [162980.035699] CPU: 0 PID: 2777 Comm: malloc Tainted: G W 4.14.6 #85 [162980.035744] task: c67e2c00 task.stack: c668e000 [162980.035783] NIP: c000fe18 LR: c00e1eec CTR: c00f90c0 [162980.035830] REGS: c668fc20 TRAP: 0700 Tainted: G W (4.14.6) [162980.035854] MSR: 00029032 <EE,ME,IR,DR,RI> CR: 24044224 XER: 20000000 [162980.036003] [162980.036003] GPR00: c00e1eec c668fcd0 c67e2c00 00000010 c6869410 10080000 00000000 77fb4000 [162980.036003] GPR08: ffff0001 0683c001 00000000 ffffff80 44028228 10018a34 00004008 418004fc [162980.036003] GPR16: c668e000 00040100 c668e000 c06c0000 c668fe78 c668e000 c6835ba0 c668fd48 [162980.036003] GPR24: 00000000 73ffffff 74000000 00000001 77fb4000 100fffff 10100000 10100000 [162980.036743] NIP [c000fe18] hugetlb_free_pgd_range+0xc8/0x1e4 [162980.036839] LR [c00e1eec] free_pgtables+0x12c/0x150 [162980.036861] Call Trace: [162980.036939] [c668fcd0] [c00f0774] unlink_anon_vmas+0x1c4/0x214 (unreliable) [162980.037040] [c668fd10] [c00e1eec] free_pgtables+0x12c/0x150 [162980.037118] [c668fd40] [c00eabac] exit_mmap+0xe8/0x1b4 [162980.037210] [c668fda0] [c0019710] mmput.part.9+0x20/0xd8 [162980.037301] [c668fdb0] [c001ecb0] do_exit+0x1f0/0x93c [162980.037386] [c668fe00] [c001f478] do_group_exit+0x40/0xcc [162980.037479] [c668fe10] [c002a76c] get_signal+0x47c/0x614 [162980.037570] [c668fe70] [c0007840] do_signal+0x54/0x244 [162980.037654] [c668ff30] [c0007ae8] do_notify_resume+0x34/0x88 [162980.037744] [c668ff40] [c000dae8] do_user_signal+0x74/0xc4 [162980.037781] Instruction dump: [162980.037821] 7fdff378 81370000 54a3463a 80890020 7d24182e 7c841a14 712a0004 4082ff94 [162980.038014] 2f890000 419e0010 712a0ff0 408200e0 <0fe00000> 54a9000a 7f984840 419d0094 [162980.038216] ---[ end trace c0ceeca8e7a5800a ]--- [162980.038754] BUG: non-zero nr_ptes on freeing mm: 1 [162985.363322] BUG: non-zero nr_ptes on freeing mm: -1 In order to fix this, this patch uses the address space "slices" implemented for BOOK3S/64 and enhanced to support PPC32 by the preceding patch. This patch modifies the context.id on the 8xx to be in the range [1:16] instead of [0:15] in order to identify context.id == 0 as not initialised contexts as done on BOOK3S This patch activates CONFIG_PPC_MM_SLICES when CONFIG_HUGETLB_PAGE is selected for the 8xx Alltough we could in theory have as many slices as PMD entries, the current slices implementation limits the number of low slices to 16. This limitation is not preventing us to fix the initial issue allthough it is suboptimal. It will be cured in a subsequent patch. Fixes: 4b91428 ("powerpc/8xx: Implement support of hugepages") Signed-off-by: Christophe Leroy <[email protected]> Reviewed-by: Aneesh Kumar K.V <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

The vport should be initialized to hdev->vport for each bp group, otherwise it will cause out-of-bounds access and bp setting not correct problem. [ 35.254124] BUG: KASAN: slab-out-of-bounds in hclge_pause_setup_hw+0x2a0/0x3f8 [hclge] [ 35.254126] Read of size 2 at addr ffff803b6651581a by task kworker/0:1/14 [ 35.254132] CPU: 0 PID: 14 Comm: kworker/0:1 Not tainted 4.19.0-rc7-hulk+ #85 [ 35.254133] Hardware name: Huawei D06/D06, BIOS Hisilicon D06 UEFI RC0 - B052 (V0.52) 09/14/2018 [ 35.254141] Workqueue: events work_for_cpu_fn [ 35.254144] Call trace: [ 35.254147] dump_backtrace+0x0/0x2f0 [ 35.254149] show_stack+0x24/0x30 [ 35.254154] dump_stack+0x110/0x184 [ 35.254157] print_address_description+0x168/0x2b0 [ 35.254160] kasan_report+0x184/0x310 [ 35.254162] __asan_load2+0x7c/0xa0 [ 35.254170] hclge_pause_setup_hw+0x2a0/0x3f8 [hclge] [ 35.254177] hclge_tm_init_hw+0x794/0x9f0 [hclge] [ 35.254184] hclge_tm_schd_init+0x48/0x58 [hclge] [ 35.254191] hclge_init_ae_dev+0x778/0x1168 [hclge] [ 35.254196] hnae3_register_ae_dev+0x14c/0x298 [hnae3] [ 35.254206] hns3_probe+0x88/0xa8 [hns3] [ 35.254210] local_pci_probe+0x7c/0xf0 [ 35.254212] work_for_cpu_fn+0x34/0x50 [ 35.254214] process_one_work+0x4d4/0xa38 [ 35.254216] worker_thread+0x55c/0x8d8 [ 35.254219] kthread+0x1b0/0x1b8 [ 35.254222] ret_from_fork+0x10/0x1c [ 35.254224] The buggy address belongs to the page: [ 35.254228] page:ffff7e00ed994400 count:1 mapcount:0 mapping:0000000000000000 index:0x0 compound_mapcount: 0 [ 35.273835] flags: 0xfffff8000008000(head) [ 35.282007] raw: 0fffff8000008000 dead000000000100 dead000000000200 0000000000000000 [ 35.282010] raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000 [ 35.282012] page dumped because: kasan: bad access detected [ 35.282014] Memory state around the buggy address: [ 35.282017] ffff803b66515700: fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe [ 35.282019] ffff803b66515780: fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe [ 35.282021] >ffff803b66515800: fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe [ 35.282022] ^ [ 35.282024] ffff803b66515880: fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe [ 35.282026] ffff803b66515900: fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe [ 35.282028] ================================================================== [ 35.282029] Disabling lock debugging due to kernel taint [ 35.282747] hclge driver initialization finished. Fixes: 67bf254 ("net: hns3: Fixes the back pressure setting when sriov is enabled") Signed-off-by: Yunsheng Lin <[email protected]> Signed-off-by: David S. Miller <[email protected]>

[ Upstream commit e8ccbb7 ] The vport should be initialized to hdev->vport for each bp group, otherwise it will cause out-of-bounds access and bp setting not correct problem. [ 35.254124] BUG: KASAN: slab-out-of-bounds in hclge_pause_setup_hw+0x2a0/0x3f8 [hclge] [ 35.254126] Read of size 2 at addr ffff803b6651581a by task kworker/0:1/14 [ 35.254132] CPU: 0 PID: 14 Comm: kworker/0:1 Not tainted 4.19.0-rc7-hulk+ #85 [ 35.254133] Hardware name: Huawei D06/D06, BIOS Hisilicon D06 UEFI RC0 - B052 (V0.52) 09/14/2018 [ 35.254141] Workqueue: events work_for_cpu_fn [ 35.254144] Call trace: [ 35.254147] dump_backtrace+0x0/0x2f0 [ 35.254149] show_stack+0x24/0x30 [ 35.254154] dump_stack+0x110/0x184 [ 35.254157] print_address_description+0x168/0x2b0 [ 35.254160] kasan_report+0x184/0x310 [ 35.254162] __asan_load2+0x7c/0xa0 [ 35.254170] hclge_pause_setup_hw+0x2a0/0x3f8 [hclge] [ 35.254177] hclge_tm_init_hw+0x794/0x9f0 [hclge] [ 35.254184] hclge_tm_schd_init+0x48/0x58 [hclge] [ 35.254191] hclge_init_ae_dev+0x778/0x1168 [hclge] [ 35.254196] hnae3_register_ae_dev+0x14c/0x298 [hnae3] [ 35.254206] hns3_probe+0x88/0xa8 [hns3] [ 35.254210] local_pci_probe+0x7c/0xf0 [ 35.254212] work_for_cpu_fn+0x34/0x50 [ 35.254214] process_one_work+0x4d4/0xa38 [ 35.254216] worker_thread+0x55c/0x8d8 [ 35.254219] kthread+0x1b0/0x1b8 [ 35.254222] ret_from_fork+0x10/0x1c [ 35.254224] The buggy address belongs to the page: [ 35.254228] page:ffff7e00ed994400 count:1 mapcount:0 mapping:0000000000000000 index:0x0 compound_mapcount: 0 [ 35.273835] flags: 0xfffff8000008000(head) [ 35.282007] raw: 0fffff8000008000 dead000000000100 dead000000000200 0000000000000000 [ 35.282010] raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000 [ 35.282012] page dumped because: kasan: bad access detected [ 35.282014] Memory state around the buggy address: [ 35.282017] ffff803b66515700: fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe [ 35.282019] ffff803b66515780: fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe [ 35.282021] >ffff803b66515800: fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe [ 35.282022] ^ [ 35.282024] ffff803b66515880: fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe [ 35.282026] ffff803b66515900: fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe [ 35.282028] ================================================================== [ 35.282029] Disabling lock debugging due to kernel taint [ 35.282747] hclge driver initialization finished. Fixes: 67bf254 ("net: hns3: Fixes the back pressure setting when sriov is enabled") Signed-off-by: Yunsheng Lin <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

This patch fixes an issue that the following error is possible to happen when ohci hardware causes an interruption and the system is shutting down at the same time. [ 34.851754] usb 2-1: USB disconnect, device number 2 [ 35.166658] irq 156: nobody cared (try booting with the "irqpoll" option) [ 35.173445] CPU: 0 PID: 22 Comm: kworker/0:1 Not tainted 5.3.0-rc5 raspberrypi#85 [ 35.179964] Hardware name: Renesas Salvator-X 2nd version board based on r8a77965 (DT) [ 35.187886] Workqueue: usb_hub_wq hub_event [ 35.192063] Call trace: [ 35.194509] dump_backtrace+0x0/0x150 [ 35.198165] show_stack+0x14/0x20 [ 35.201475] dump_stack+0xa0/0xc4 [ 35.204785] __report_bad_irq+0x34/0xe8 [ 35.208614] note_interrupt+0x2cc/0x318 [ 35.212446] handle_irq_event_percpu+0x5c/0x88 [ 35.216883] handle_irq_event+0x48/0x78 [ 35.220712] handle_fasteoi_irq+0xb4/0x188 [ 35.224802] generic_handle_irq+0x24/0x38 [ 35.228804] __handle_domain_irq+0x5c/0xb0 [ 35.232893] gic_handle_irq+0x58/0xa8 [ 35.236548] el1_irq+0xb8/0x180 [ 35.239681] __do_softirq+0x94/0x23c [ 35.243253] irq_exit+0xd0/0xd8 [ 35.246387] __handle_domain_irq+0x60/0xb0 [ 35.250475] gic_handle_irq+0x58/0xa8 [ 35.254130] el1_irq+0xb8/0x180 [ 35.257268] kernfs_find_ns+0x5c/0x120 [ 35.261010] kernfs_find_and_get_ns+0x3c/0x60 [ 35.265361] sysfs_unmerge_group+0x20/0x68 [ 35.269454] dpm_sysfs_remove+0x2c/0x68 [ 35.273284] device_del+0x80/0x370 [ 35.276683] hid_destroy_device+0x28/0x60 [ 35.280686] usbhid_disconnect+0x4c/0x80 [ 35.284602] usb_unbind_interface+0x6c/0x268 [ 35.288867] device_release_driver_internal+0xe4/0x1b0 [ 35.293998] device_release_driver+0x14/0x20 [ 35.298261] bus_remove_device+0x110/0x128 [ 35.302350] device_del+0x148/0x370 [ 35.305832] usb_disable_device+0x8c/0x1d0 [ 35.309921] usb_disconnect+0xc8/0x2d0 [ 35.313663] hub_event+0x6e0/0x1128 [ 35.317146] process_one_work+0x1e0/0x320 [ 35.321148] worker_thread+0x40/0x450 [ 35.324805] kthread+0x124/0x128 [ 35.328027] ret_from_fork+0x10/0x18 [ 35.331594] handlers: [ 35.333862] [<0000000079300c1d>] usb_hcd_irq [ 35.338126] [<0000000079300c1d>] usb_hcd_irq [ 35.342389] Disabling IRQ raspberrypi#156 ohci_shutdown() disables all the interrupt and rh_state is set to OHCI_RH_HALTED. In other hand, ohci_irq() is possible to enable OHCI_INTR_SF and OHCI_INTR_MIE on ohci_irq(). Note that OHCI_INTR_SF is possible to be set by start_ed_unlink() which is called: ohci_irq() -> process_done_list() -> takeback_td() -> start_ed_unlink() So, ohci_irq() has the following condition, the issue happens by &ohci->regs->intrenable = OHCI_INTR_MIE | OHCI_INTR_SF and ohci->rh_state = OHCI_RH_HALTED: /* interrupt for some other device? */ if (ints == 0 || unlikely(ohci->rh_state == OHCI_RH_HALTED)) return IRQ_NOTMINE; To fix the issue, ohci_shutdown() holds the spin lock while disabling the interruption and changing the rh_state flag to prevent reenable the OHCI_INTR_MIE unexpectedly. Note that io_watchdog_func() also calls the ohci_shutdown() and it already held the spin lock, so that the patch makes a new function as _ohci_shutdown(). This patch is inspired by a Renesas R-Car Gen3 BSP patch from Tho Vu. Signed-off-by: Yoshihiro Shimoda <[email protected]> Cc: stable <[email protected]> Acked-by: Alan Stern <[email protected]> Link: https://lore.kernel.org/r/1566877910-6020-1-git-send-email-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit a349b95 upstream. This patch fixes an issue that the following error is possible to happen when ohci hardware causes an interruption and the system is shutting down at the same time. [ 34.851754] usb 2-1: USB disconnect, device number 2 [ 35.166658] irq 156: nobody cared (try booting with the "irqpoll" option) [ 35.173445] CPU: 0 PID: 22 Comm: kworker/0:1 Not tainted 5.3.0-rc5 #85 [ 35.179964] Hardware name: Renesas Salvator-X 2nd version board based on r8a77965 (DT) [ 35.187886] Workqueue: usb_hub_wq hub_event [ 35.192063] Call trace: [ 35.194509] dump_backtrace+0x0/0x150 [ 35.198165] show_stack+0x14/0x20 [ 35.201475] dump_stack+0xa0/0xc4 [ 35.204785] __report_bad_irq+0x34/0xe8 [ 35.208614] note_interrupt+0x2cc/0x318 [ 35.212446] handle_irq_event_percpu+0x5c/0x88 [ 35.216883] handle_irq_event+0x48/0x78 [ 35.220712] handle_fasteoi_irq+0xb4/0x188 [ 35.224802] generic_handle_irq+0x24/0x38 [ 35.228804] __handle_domain_irq+0x5c/0xb0 [ 35.232893] gic_handle_irq+0x58/0xa8 [ 35.236548] el1_irq+0xb8/0x180 [ 35.239681] __do_softirq+0x94/0x23c [ 35.243253] irq_exit+0xd0/0xd8 [ 35.246387] __handle_domain_irq+0x60/0xb0 [ 35.250475] gic_handle_irq+0x58/0xa8 [ 35.254130] el1_irq+0xb8/0x180 [ 35.257268] kernfs_find_ns+0x5c/0x120 [ 35.261010] kernfs_find_and_get_ns+0x3c/0x60 [ 35.265361] sysfs_unmerge_group+0x20/0x68 [ 35.269454] dpm_sysfs_remove+0x2c/0x68 [ 35.273284] device_del+0x80/0x370 [ 35.276683] hid_destroy_device+0x28/0x60 [ 35.280686] usbhid_disconnect+0x4c/0x80 [ 35.284602] usb_unbind_interface+0x6c/0x268 [ 35.288867] device_release_driver_internal+0xe4/0x1b0 [ 35.293998] device_release_driver+0x14/0x20 [ 35.298261] bus_remove_device+0x110/0x128 [ 35.302350] device_del+0x148/0x370 [ 35.305832] usb_disable_device+0x8c/0x1d0 [ 35.309921] usb_disconnect+0xc8/0x2d0 [ 35.313663] hub_event+0x6e0/0x1128 [ 35.317146] process_one_work+0x1e0/0x320 [ 35.321148] worker_thread+0x40/0x450 [ 35.324805] kthread+0x124/0x128 [ 35.328027] ret_from_fork+0x10/0x18 [ 35.331594] handlers: [ 35.333862] [<0000000079300c1d>] usb_hcd_irq [ 35.338126] [<0000000079300c1d>] usb_hcd_irq [ 35.342389] Disabling IRQ #156 ohci_shutdown() disables all the interrupt and rh_state is set to OHCI_RH_HALTED. In other hand, ohci_irq() is possible to enable OHCI_INTR_SF and OHCI_INTR_MIE on ohci_irq(). Note that OHCI_INTR_SF is possible to be set by start_ed_unlink() which is called: ohci_irq() -> process_done_list() -> takeback_td() -> start_ed_unlink() So, ohci_irq() has the following condition, the issue happens by &ohci->regs->intrenable = OHCI_INTR_MIE | OHCI_INTR_SF and ohci->rh_state = OHCI_RH_HALTED: /* interrupt for some other device? */ if (ints == 0 || unlikely(ohci->rh_state == OHCI_RH_HALTED)) return IRQ_NOTMINE; To fix the issue, ohci_shutdown() holds the spin lock while disabling the interruption and changing the rh_state flag to prevent reenable the OHCI_INTR_MIE unexpectedly. Note that io_watchdog_func() also calls the ohci_shutdown() and it already held the spin lock, so that the patch makes a new function as _ohci_shutdown(). This patch is inspired by a Renesas R-Car Gen3 BSP patch from Tho Vu. Signed-off-by: Yoshihiro Shimoda <[email protected]> Cc: stable <[email protected]> Acked-by: Alan Stern <[email protected]> Link: https://lore.kernel.org/r/1566877910-6020-1-git-send-email-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit a349b95 upstream. This patch fixes an issue that the following error is possible to happen when ohci hardware causes an interruption and the system is shutting down at the same time. [ 34.851754] usb 2-1: USB disconnect, device number 2 [ 35.166658] irq 156: nobody cared (try booting with the "irqpoll" option) [ 35.173445] CPU: 0 PID: 22 Comm: kworker/0:1 Not tainted 5.3.0-rc5 raspberrypi#85 [ 35.179964] Hardware name: Renesas Salvator-X 2nd version board based on r8a77965 (DT) [ 35.187886] Workqueue: usb_hub_wq hub_event [ 35.192063] Call trace: [ 35.194509] dump_backtrace+0x0/0x150 [ 35.198165] show_stack+0x14/0x20 [ 35.201475] dump_stack+0xa0/0xc4 [ 35.204785] __report_bad_irq+0x34/0xe8 [ 35.208614] note_interrupt+0x2cc/0x318 [ 35.212446] handle_irq_event_percpu+0x5c/0x88 [ 35.216883] handle_irq_event+0x48/0x78 [ 35.220712] handle_fasteoi_irq+0xb4/0x188 [ 35.224802] generic_handle_irq+0x24/0x38 [ 35.228804] __handle_domain_irq+0x5c/0xb0 [ 35.232893] gic_handle_irq+0x58/0xa8 [ 35.236548] el1_irq+0xb8/0x180 [ 35.239681] __do_softirq+0x94/0x23c [ 35.243253] irq_exit+0xd0/0xd8 [ 35.246387] __handle_domain_irq+0x60/0xb0 [ 35.250475] gic_handle_irq+0x58/0xa8 [ 35.254130] el1_irq+0xb8/0x180 [ 35.257268] kernfs_find_ns+0x5c/0x120 [ 35.261010] kernfs_find_and_get_ns+0x3c/0x60 [ 35.265361] sysfs_unmerge_group+0x20/0x68 [ 35.269454] dpm_sysfs_remove+0x2c/0x68 [ 35.273284] device_del+0x80/0x370 [ 35.276683] hid_destroy_device+0x28/0x60 [ 35.280686] usbhid_disconnect+0x4c/0x80 [ 35.284602] usb_unbind_interface+0x6c/0x268 [ 35.288867] device_release_driver_internal+0xe4/0x1b0 [ 35.293998] device_release_driver+0x14/0x20 [ 35.298261] bus_remove_device+0x110/0x128 [ 35.302350] device_del+0x148/0x370 [ 35.305832] usb_disable_device+0x8c/0x1d0 [ 35.309921] usb_disconnect+0xc8/0x2d0 [ 35.313663] hub_event+0x6e0/0x1128 [ 35.317146] process_one_work+0x1e0/0x320 [ 35.321148] worker_thread+0x40/0x450 [ 35.324805] kthread+0x124/0x128 [ 35.328027] ret_from_fork+0x10/0x18 [ 35.331594] handlers: [ 35.333862] [<0000000079300c1d>] usb_hcd_irq [ 35.338126] [<0000000079300c1d>] usb_hcd_irq [ 35.342389] Disabling IRQ raspberrypi#156 ohci_shutdown() disables all the interrupt and rh_state is set to OHCI_RH_HALTED. In other hand, ohci_irq() is possible to enable OHCI_INTR_SF and OHCI_INTR_MIE on ohci_irq(). Note that OHCI_INTR_SF is possible to be set by start_ed_unlink() which is called: ohci_irq() -> process_done_list() -> takeback_td() -> start_ed_unlink() So, ohci_irq() has the following condition, the issue happens by &ohci->regs->intrenable = OHCI_INTR_MIE | OHCI_INTR_SF and ohci->rh_state = OHCI_RH_HALTED: /* interrupt for some other device? */ if (ints == 0 || unlikely(ohci->rh_state == OHCI_RH_HALTED)) return IRQ_NOTMINE; To fix the issue, ohci_shutdown() holds the spin lock while disabling the interruption and changing the rh_state flag to prevent reenable the OHCI_INTR_MIE unexpectedly. Note that io_watchdog_func() also calls the ohci_shutdown() and it already held the spin lock, so that the patch makes a new function as _ohci_shutdown(). This patch is inspired by a Renesas R-Car Gen3 BSP patch from Tho Vu. Signed-off-by: Yoshihiro Shimoda <[email protected]> Cc: stable <[email protected]> Acked-by: Alan Stern <[email protected]> Link: https://lore.kernel.org/r/1566877910-6020-1-git-send-email-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 7febbcb upstream. The commit 54e53b2 ("tty: serial: 8250: pass IRQ shared flag to UART ports") nicely explained the problem: ---8<---8<--- On some systems IRQ lines between multiple UARTs might be shared. If so, the irqflags have to be configured accordingly. The reason is: The 8250 port startup code performs IRQ tests *before* the IRQ handler for that particular port is registered. This is performed in serial8250_do_startup(). This function checks whether IRQF_SHARED is configured and only then disables the IRQ line while testing. This test is performed upon each open() of the UART device. Imagine two UARTs share the same IRQ line: On is already opened and the IRQ is active. When the second UART is opened, the IRQ line has to be disabled while performing IRQ tests. Otherwise an IRQ might handler might be invoked, but the IRQ itself cannot be handled, because the corresponding handler isn't registered, yet. That's because the 8250 code uses a chain-handler and invokes the corresponding port's IRQ handling routines himself. Unfortunately this IRQF_SHARED flag isn't configured for UARTs probed via device tree even if the IRQs are shared. This way, the actual and shared IRQ line isn't disabled while performing tests and the kernel correctly detects a spurious IRQ. So, adding this flag to the DT probe solves the issue. Note: The UPF_SHARE_IRQ flag is configured unconditionally. Therefore, the IRQF_SHARED flag can be set unconditionally as well. Example stack trace by performing `echo 1 > /dev/ttyS2` on a non-patched system: |irq 85: nobody cared (try booting with the "irqpoll" option) | [...] |handlers: |[<ffff0000080fc628>] irq_default_primary_handler threaded [<ffff00000855fbb8>] serial8250_interrupt |Disabling IRQ raspberrypi#85 ---8<---8<--- But unfortunately didn't fix the root cause. Let's try again here by moving IRQ flag assignment from serial_link_irq_chain() to serial8250_do_startup(). This should fix the similar issue reported for 8250_pnp case. Since this change we don't need to have custom solutions in 8250_aspeed_vuart and 8250_of drivers, thus, drop them. Fixes: 1c2f049 ("serial: 8250: add IRQ trigger support") Reported-by: Li RongQing <[email protected]> Cc: Kurt Kanzenbach <[email protected]> Cc: Vikram Pandita <[email protected]> Signed-off-by: Andy Shevchenko <[email protected]> Cc: stable <[email protected]> Acked-by: Kurt Kanzenbach <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 7febbcb upstream. The commit 54e53b2 ("tty: serial: 8250: pass IRQ shared flag to UART ports") nicely explained the problem: ---8<---8<--- On some systems IRQ lines between multiple UARTs might be shared. If so, the irqflags have to be configured accordingly. The reason is: The 8250 port startup code performs IRQ tests *before* the IRQ handler for that particular port is registered. This is performed in serial8250_do_startup(). This function checks whether IRQF_SHARED is configured and only then disables the IRQ line while testing. This test is performed upon each open() of the UART device. Imagine two UARTs share the same IRQ line: On is already opened and the IRQ is active. When the second UART is opened, the IRQ line has to be disabled while performing IRQ tests. Otherwise an IRQ might handler might be invoked, but the IRQ itself cannot be handled, because the corresponding handler isn't registered, yet. That's because the 8250 code uses a chain-handler and invokes the corresponding port's IRQ handling routines himself. Unfortunately this IRQF_SHARED flag isn't configured for UARTs probed via device tree even if the IRQs are shared. This way, the actual and shared IRQ line isn't disabled while performing tests and the kernel correctly detects a spurious IRQ. So, adding this flag to the DT probe solves the issue. Note: The UPF_SHARE_IRQ flag is configured unconditionally. Therefore, the IRQF_SHARED flag can be set unconditionally as well. Example stack trace by performing `echo 1 > /dev/ttyS2` on a non-patched system: |irq 85: nobody cared (try booting with the "irqpoll" option) | [...] |handlers: |[<ffff0000080fc628>] irq_default_primary_handler threaded [<ffff00000855fbb8>] serial8250_interrupt |Disabling IRQ #85 ---8<---8<--- But unfortunately didn't fix the root cause. Let's try again here by moving IRQ flag assignment from serial_link_irq_chain() to serial8250_do_startup(). This should fix the similar issue reported for 8250_pnp case. Since this change we don't need to have custom solutions in 8250_aspeed_vuart and 8250_of drivers, thus, drop them. Fixes: 1c2f049 ("serial: 8250: add IRQ trigger support") Reported-by: Li RongQing <[email protected]> Cc: Kurt Kanzenbach <[email protected]> Cc: Vikram Pandita <[email protected]> Signed-off-by: Andy Shevchenko <[email protected]> Cc: stable <[email protected]> Acked-by: Kurt Kanzenbach <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>

The commit 54e53b2 ("tty: serial: 8250: pass IRQ shared flag to UART ports") nicely explained the problem: ---8<---8<--- On some systems IRQ lines between multiple UARTs might be shared. If so, the irqflags have to be configured accordingly. The reason is: The 8250 port startup code performs IRQ tests *before* the IRQ handler for that particular port is registered. This is performed in serial8250_do_startup(). This function checks whether IRQF_SHARED is configured and only then disables the IRQ line while testing. This test is performed upon each open() of the UART device. Imagine two UARTs share the same IRQ line: On is already opened and the IRQ is active. When the second UART is opened, the IRQ line has to be disabled while performing IRQ tests. Otherwise an IRQ might handler might be invoked, but the IRQ itself cannot be handled, because the corresponding handler isn't registered, yet. That's because the 8250 code uses a chain-handler and invokes the corresponding port's IRQ handling routines himself. Unfortunately this IRQF_SHARED flag isn't configured for UARTs probed via device tree even if the IRQs are shared. This way, the actual and shared IRQ line isn't disabled while performing tests and the kernel correctly detects a spurious IRQ. So, adding this flag to the DT probe solves the issue. Note: The UPF_SHARE_IRQ flag is configured unconditionally. Therefore, the IRQF_SHARED flag can be set unconditionally as well. Example stack trace by performing `echo 1 > /dev/ttyS2` on a non-patched system: |irq 85: nobody cared (try booting with the "irqpoll" option) | [...] |handlers: |[<ffff0000080fc628>] irq_default_primary_handler threaded [<ffff00000855fbb8>] serial8250_interrupt |Disabling IRQ #85 ---8<---8<--- But unfortunately didn't fix the root cause. Let's try again here by moving IRQ flag assignment from serial_link_irq_chain() to serial8250_do_startup(). This should fix the similar issue reported for 8250_pnp case. Since this change we don't need to have custom solutions in 8250_aspeed_vuart and 8250_of drivers, thus, drop them. Fixes: 1c2f049 ("serial: 8250: add IRQ trigger support") Reported-by: Li RongQing <[email protected]> Cc: Kurt Kanzenbach <[email protected]> Cc: Vikram Pandita <[email protected]> Signed-off-by: Andy Shevchenko <[email protected]> Cc: stable <[email protected]> Acked-by: Kurt Kanzenbach <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 7febbcb upstream. The commit 54e53b2 ("tty: serial: 8250: pass IRQ shared flag to UART ports") nicely explained the problem: ---8<---8<--- On some systems IRQ lines between multiple UARTs might be shared. If so, the irqflags have to be configured accordingly. The reason is: The 8250 port startup code performs IRQ tests *before* the IRQ handler for that particular port is registered. This is performed in serial8250_do_startup(). This function checks whether IRQF_SHARED is configured and only then disables the IRQ line while testing. This test is performed upon each open() of the UART device. Imagine two UARTs share the same IRQ line: On is already opened and the IRQ is active. When the second UART is opened, the IRQ line has to be disabled while performing IRQ tests. Otherwise an IRQ might handler might be invoked, but the IRQ itself cannot be handled, because the corresponding handler isn't registered, yet. That's because the 8250 code uses a chain-handler and invokes the corresponding port's IRQ handling routines himself. Unfortunately this IRQF_SHARED flag isn't configured for UARTs probed via device tree even if the IRQs are shared. This way, the actual and shared IRQ line isn't disabled while performing tests and the kernel correctly detects a spurious IRQ. So, adding this flag to the DT probe solves the issue. Note: The UPF_SHARE_IRQ flag is configured unconditionally. Therefore, the IRQF_SHARED flag can be set unconditionally as well. Example stack trace by performing `echo 1 > /dev/ttyS2` on a non-patched system: |irq 85: nobody cared (try booting with the "irqpoll" option) | [...] |handlers: |[<ffff0000080fc628>] irq_default_primary_handler threaded [<ffff00000855fbb8>] serial8250_interrupt |Disabling IRQ raspberrypi#85 ---8<---8<--- But unfortunately didn't fix the root cause. Let's try again here by moving IRQ flag assignment from serial_link_irq_chain() to serial8250_do_startup(). This should fix the similar issue reported for 8250_pnp case. Since this change we don't need to have custom solutions in 8250_aspeed_vuart and 8250_of drivers, thus, drop them. Fixes: 1c2f049 ("serial: 8250: add IRQ trigger support") Reported-by: Li RongQing <[email protected]> Cc: Kurt Kanzenbach <[email protected]> Cc: Vikram Pandita <[email protected]> Signed-off-by: Andy Shevchenko <[email protected]> Cc: stable <[email protected]> Acked-by: Kurt Kanzenbach <[email protected]> Link: https://lore.kernel.org/r/[email protected] [Kurt: Backport to v4.9] Signed-off-by: Kurt Kanzenbach <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

…sted The current EOI handler for LEVEL triggered interrupts calls clk_enable(), register IO, clk_disable(). The clock manipulation requires locking which happens with IRQs disabled in clk_enable_lock(). Instead of turning the clock on and off all the time, enable the clock in case LEVEL interrupt is requested and keep the clock enabled until all LEVEL interrupts are freed. The LEVEL interrupts are an exception on this platform and seldom used, so this does not affect the common case. This simplifies the LEVEL interrupt handling considerably and also fixes the following splat found when using preempt-rt: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at kernel/locking/rtmutex.c:2040 __rt_mutex_trylock+0x37/0x62 Modules linked in: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.10.109-rt65-stable-standard-00068-g6a5afc4b1217 raspberrypi#85 Hardware name: STM32 (Device Tree Support) [<c010a45d>] (unwind_backtrace) from [<c010766f>] (show_stack+0xb/0xc) [<c010766f>] (show_stack) from [<c06353ab>] (dump_stack+0x6f/0x84) [<c06353ab>] (dump_stack) from [<c01145e3>] (__warn+0x7f/0xa4) [<c01145e3>] (__warn) from [<c063386f>] (warn_slowpath_fmt+0x3b/0x74) [<c063386f>] (warn_slowpath_fmt) from [<c063b43d>] (__rt_mutex_trylock+0x37/0x62) [<c063b43d>] (__rt_mutex_trylock) from [<c063c053>] (rt_spin_trylock+0x7/0x16) [<c063c053>] (rt_spin_trylock) from [<c036a2f3>] (clk_enable_lock+0xb/0x80) [<c036a2f3>] (clk_enable_lock) from [<c036ba69>] (clk_core_enable_lock+0x9/0x18) [<c036ba69>] (clk_core_enable_lock) from [<c034e9f3>] (stm32_gpio_get+0x11/0x24) [<c034e9f3>] (stm32_gpio_get) from [<c034ef43>] (stm32_gpio_irq_trigger+0x1f/0x48) [<c034ef43>] (stm32_gpio_irq_trigger) from [<c014aa53>] (handle_fasteoi_irq+0x71/0xa8) [<c014aa53>] (handle_fasteoi_irq) from [<c0147111>] (generic_handle_irq+0x19/0x22) [<c0147111>] (generic_handle_irq) from [<c014752d>] (__handle_domain_irq+0x55/0x64) [<c014752d>] (__handle_domain_irq) from [<c0346f13>] (gic_handle_irq+0x53/0x64) [<c0346f13>] (gic_handle_irq) from [<c0100ba5>] (__irq_svc+0x65/0xc0) Exception stack(0xc0e01f18 to 0xc0e01f60) 1f00: 0000300c 00000000 1f20: 0000300c c010ff01 00000000 00000000 c0e00000 c0e07714 00000001 c0e01f78 1f40: c0e07758 00000000 ef7cd0ff c0e01f68 c010554b c0105542 40000033 ffffffff [<c0100ba5>] (__irq_svc) from [<c0105542>] (arch_cpu_idle+0xc/0x1e) [<c0105542>] (arch_cpu_idle) from [<c063be95>] (default_idle_call+0x21/0x3c) [<c063be95>] (default_idle_call) from [<c01324f7>] (do_idle+0xe3/0x1e4) [<c01324f7>] (do_idle) from [<c01327b3>] (cpu_startup_entry+0x13/0x14) [<c01327b3>] (cpu_startup_entry) from [<c0a00c13>] (start_kernel+0x397/0x3d4) [<c0a00c13>] (start_kernel) from [<00000000>] (0x0) ---[ end trace 0000000000000002 ]--- Power consumption measured on STM32MP157C DHCOM SoM is not increased or is below noise threshold. Fixes: 47beed5 ("pinctrl: stm32: Add level interrupt support to gpio irq chip") Signed-off-by: Marek Vasut <[email protected]> Cc: Alexandre Torgue <[email protected]> Cc: Fabien Dessenne <[email protected]> Cc: Linus Walleij <[email protected]> Cc: Marc Zyngier <[email protected]> Cc: [email protected] Cc: [email protected] To: [email protected] Reviewed-by: Fabien Dessenne <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Linus Walleij <[email protected]>

…sted [ Upstream commit 05d8af4 ] The current EOI handler for LEVEL triggered interrupts calls clk_enable(), register IO, clk_disable(). The clock manipulation requires locking which happens with IRQs disabled in clk_enable_lock(). Instead of turning the clock on and off all the time, enable the clock in case LEVEL interrupt is requested and keep the clock enabled until all LEVEL interrupts are freed. The LEVEL interrupts are an exception on this platform and seldom used, so this does not affect the common case. This simplifies the LEVEL interrupt handling considerably and also fixes the following splat found when using preempt-rt: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at kernel/locking/rtmutex.c:2040 __rt_mutex_trylock+0x37/0x62 Modules linked in: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.10.109-rt65-stable-standard-00068-g6a5afc4b1217 raspberrypi#85 Hardware name: STM32 (Device Tree Support) [<c010a45d>] (unwind_backtrace) from [<c010766f>] (show_stack+0xb/0xc) [<c010766f>] (show_stack) from [<c06353ab>] (dump_stack+0x6f/0x84) [<c06353ab>] (dump_stack) from [<c01145e3>] (__warn+0x7f/0xa4) [<c01145e3>] (__warn) from [<c063386f>] (warn_slowpath_fmt+0x3b/0x74) [<c063386f>] (warn_slowpath_fmt) from [<c063b43d>] (__rt_mutex_trylock+0x37/0x62) [<c063b43d>] (__rt_mutex_trylock) from [<c063c053>] (rt_spin_trylock+0x7/0x16) [<c063c053>] (rt_spin_trylock) from [<c036a2f3>] (clk_enable_lock+0xb/0x80) [<c036a2f3>] (clk_enable_lock) from [<c036ba69>] (clk_core_enable_lock+0x9/0x18) [<c036ba69>] (clk_core_enable_lock) from [<c034e9f3>] (stm32_gpio_get+0x11/0x24) [<c034e9f3>] (stm32_gpio_get) from [<c034ef43>] (stm32_gpio_irq_trigger+0x1f/0x48) [<c034ef43>] (stm32_gpio_irq_trigger) from [<c014aa53>] (handle_fasteoi_irq+0x71/0xa8) [<c014aa53>] (handle_fasteoi_irq) from [<c0147111>] (generic_handle_irq+0x19/0x22) [<c0147111>] (generic_handle_irq) from [<c014752d>] (__handle_domain_irq+0x55/0x64) [<c014752d>] (__handle_domain_irq) from [<c0346f13>] (gic_handle_irq+0x53/0x64) [<c0346f13>] (gic_handle_irq) from [<c0100ba5>] (__irq_svc+0x65/0xc0) Exception stack(0xc0e01f18 to 0xc0e01f60) 1f00: 0000300c 00000000 1f20: 0000300c c010ff01 00000000 00000000 c0e00000 c0e07714 00000001 c0e01f78 1f40: c0e07758 00000000 ef7cd0ff c0e01f68 c010554b c0105542 40000033 ffffffff [<c0100ba5>] (__irq_svc) from [<c0105542>] (arch_cpu_idle+0xc/0x1e) [<c0105542>] (arch_cpu_idle) from [<c063be95>] (default_idle_call+0x21/0x3c) [<c063be95>] (default_idle_call) from [<c01324f7>] (do_idle+0xe3/0x1e4) [<c01324f7>] (do_idle) from [<c01327b3>] (cpu_startup_entry+0x13/0x14) [<c01327b3>] (cpu_startup_entry) from [<c0a00c13>] (start_kernel+0x397/0x3d4) [<c0a00c13>] (start_kernel) from [<00000000>] (0x0) ---[ end trace 0000000000000002 ]--- Power consumption measured on STM32MP157C DHCOM SoM is not increased or is below noise threshold. Fixes: 47beed5 ("pinctrl: stm32: Add level interrupt support to gpio irq chip") Signed-off-by: Marek Vasut <[email protected]> Cc: Alexandre Torgue <[email protected]> Cc: Fabien Dessenne <[email protected]> Cc: Linus Walleij <[email protected]> Cc: Marc Zyngier <[email protected]> Cc: [email protected] Cc: [email protected] To: [email protected] Reviewed-by: Fabien Dessenne <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Linus Walleij <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

…sted [ Upstream commit 05d8af4 ] The current EOI handler for LEVEL triggered interrupts calls clk_enable(), register IO, clk_disable(). The clock manipulation requires locking which happens with IRQs disabled in clk_enable_lock(). Instead of turning the clock on and off all the time, enable the clock in case LEVEL interrupt is requested and keep the clock enabled until all LEVEL interrupts are freed. The LEVEL interrupts are an exception on this platform and seldom used, so this does not affect the common case. This simplifies the LEVEL interrupt handling considerably and also fixes the following splat found when using preempt-rt: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at kernel/locking/rtmutex.c:2040 __rt_mutex_trylock+0x37/0x62 Modules linked in: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.10.109-rt65-stable-standard-00068-g6a5afc4b1217 #85 Hardware name: STM32 (Device Tree Support) [<c010a45d>] (unwind_backtrace) from [<c010766f>] (show_stack+0xb/0xc) [<c010766f>] (show_stack) from [<c06353ab>] (dump_stack+0x6f/0x84) [<c06353ab>] (dump_stack) from [<c01145e3>] (__warn+0x7f/0xa4) [<c01145e3>] (__warn) from [<c063386f>] (warn_slowpath_fmt+0x3b/0x74) [<c063386f>] (warn_slowpath_fmt) from [<c063b43d>] (__rt_mutex_trylock+0x37/0x62) [<c063b43d>] (__rt_mutex_trylock) from [<c063c053>] (rt_spin_trylock+0x7/0x16) [<c063c053>] (rt_spin_trylock) from [<c036a2f3>] (clk_enable_lock+0xb/0x80) [<c036a2f3>] (clk_enable_lock) from [<c036ba69>] (clk_core_enable_lock+0x9/0x18) [<c036ba69>] (clk_core_enable_lock) from [<c034e9f3>] (stm32_gpio_get+0x11/0x24) [<c034e9f3>] (stm32_gpio_get) from [<c034ef43>] (stm32_gpio_irq_trigger+0x1f/0x48) [<c034ef43>] (stm32_gpio_irq_trigger) from [<c014aa53>] (handle_fasteoi_irq+0x71/0xa8) [<c014aa53>] (handle_fasteoi_irq) from [<c0147111>] (generic_handle_irq+0x19/0x22) [<c0147111>] (generic_handle_irq) from [<c014752d>] (__handle_domain_irq+0x55/0x64) [<c014752d>] (__handle_domain_irq) from [<c0346f13>] (gic_handle_irq+0x53/0x64) [<c0346f13>] (gic_handle_irq) from [<c0100ba5>] (__irq_svc+0x65/0xc0) Exception stack(0xc0e01f18 to 0xc0e01f60) 1f00: 0000300c 00000000 1f20: 0000300c c010ff01 00000000 00000000 c0e00000 c0e07714 00000001 c0e01f78 1f40: c0e07758 00000000 ef7cd0ff c0e01f68 c010554b c0105542 40000033 ffffffff [<c0100ba5>] (__irq_svc) from [<c0105542>] (arch_cpu_idle+0xc/0x1e) [<c0105542>] (arch_cpu_idle) from [<c063be95>] (default_idle_call+0x21/0x3c) [<c063be95>] (default_idle_call) from [<c01324f7>] (do_idle+0xe3/0x1e4) [<c01324f7>] (do_idle) from [<c01327b3>] (cpu_startup_entry+0x13/0x14) [<c01327b3>] (cpu_startup_entry) from [<c0a00c13>] (start_kernel+0x397/0x3d4) [<c0a00c13>] (start_kernel) from [<00000000>] (0x0) ---[ end trace 0000000000000002 ]--- Power consumption measured on STM32MP157C DHCOM SoM is not increased or is below noise threshold. Fixes: 47beed5 ("pinctrl: stm32: Add level interrupt support to gpio irq chip") Signed-off-by: Marek Vasut <[email protected]> Cc: Alexandre Torgue <[email protected]> Cc: Fabien Dessenne <[email protected]> Cc: Linus Walleij <[email protected]> Cc: Marc Zyngier <[email protected]> Cc: [email protected] Cc: [email protected] To: [email protected] Reviewed-by: Fabien Dessenne <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Linus Walleij <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

…sted [ Upstream commit 05d8af4 ] The current EOI handler for LEVEL triggered interrupts calls clk_enable(), register IO, clk_disable(). The clock manipulation requires locking which happens with IRQs disabled in clk_enable_lock(). Instead of turning the clock on and off all the time, enable the clock in case LEVEL interrupt is requested and keep the clock enabled until all LEVEL interrupts are freed. The LEVEL interrupts are an exception on this platform and seldom used, so this does not affect the common case. This simplifies the LEVEL interrupt handling considerably and also fixes the following splat found when using preempt-rt: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at kernel/locking/rtmutex.c:2040 __rt_mutex_trylock+0x37/0x62 Modules linked in: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.10.109-rt65-stable-standard-00068-g6a5afc4b1217 raspberrypi#85 Hardware name: STM32 (Device Tree Support) [<c010a45d>] (unwind_backtrace) from [<c010766f>] (show_stack+0xb/0xc) [<c010766f>] (show_stack) from [<c06353ab>] (dump_stack+0x6f/0x84) [<c06353ab>] (dump_stack) from [<c01145e3>] (__warn+0x7f/0xa4) [<c01145e3>] (__warn) from [<c063386f>] (warn_slowpath_fmt+0x3b/0x74) [<c063386f>] (warn_slowpath_fmt) from [<c063b43d>] (__rt_mutex_trylock+0x37/0x62) [<c063b43d>] (__rt_mutex_trylock) from [<c063c053>] (rt_spin_trylock+0x7/0x16) [<c063c053>] (rt_spin_trylock) from [<c036a2f3>] (clk_enable_lock+0xb/0x80) [<c036a2f3>] (clk_enable_lock) from [<c036ba69>] (clk_core_enable_lock+0x9/0x18) [<c036ba69>] (clk_core_enable_lock) from [<c034e9f3>] (stm32_gpio_get+0x11/0x24) [<c034e9f3>] (stm32_gpio_get) from [<c034ef43>] (stm32_gpio_irq_trigger+0x1f/0x48) [<c034ef43>] (stm32_gpio_irq_trigger) from [<c014aa53>] (handle_fasteoi_irq+0x71/0xa8) [<c014aa53>] (handle_fasteoi_irq) from [<c0147111>] (generic_handle_irq+0x19/0x22) [<c0147111>] (generic_handle_irq) from [<c014752d>] (__handle_domain_irq+0x55/0x64) [<c014752d>] (__handle_domain_irq) from [<c0346f13>] (gic_handle_irq+0x53/0x64) [<c0346f13>] (gic_handle_irq) from [<c0100ba5>] (__irq_svc+0x65/0xc0) Exception stack(0xc0e01f18 to 0xc0e01f60) 1f00: 0000300c 00000000 1f20: 0000300c c010ff01 00000000 00000000 c0e00000 c0e07714 00000001 c0e01f78 1f40: c0e07758 00000000 ef7cd0ff c0e01f68 c010554b c0105542 40000033 ffffffff [<c0100ba5>] (__irq_svc) from [<c0105542>] (arch_cpu_idle+0xc/0x1e) [<c0105542>] (arch_cpu_idle) from [<c063be95>] (default_idle_call+0x21/0x3c) [<c063be95>] (default_idle_call) from [<c01324f7>] (do_idle+0xe3/0x1e4) [<c01324f7>] (do_idle) from [<c01327b3>] (cpu_startup_entry+0x13/0x14) [<c01327b3>] (cpu_startup_entry) from [<c0a00c13>] (start_kernel+0x397/0x3d4) [<c0a00c13>] (start_kernel) from [<00000000>] (0x0) ---[ end trace 0000000000000002 ]--- Power consumption measured on STM32MP157C DHCOM SoM is not increased or is below noise threshold. Fixes: 47beed5 ("pinctrl: stm32: Add level interrupt support to gpio irq chip") Signed-off-by: Marek Vasut <[email protected]> Cc: Alexandre Torgue <[email protected]> Cc: Fabien Dessenne <[email protected]> Cc: Linus Walleij <[email protected]> Cc: Marc Zyngier <[email protected]> Cc: [email protected] Cc: [email protected] To: [email protected] Reviewed-by: Fabien Dessenne <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Linus Walleij <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 3031993 ] lpg_brighness_set() function can sleep, while led's brightness_set() callback must be non-blocking. Change LPG driver to use brightness_set_blocking() instead. BUG: sleeping function called from invalid context at kernel/locking/mutex.c:580 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 0, name: swapper/0 preempt_count: 101, expected: 0 INFO: lockdep is turned off. CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 6.1.0-rc1-00014-gbe99b089c6fc-dirty raspberrypi#85 Hardware name: Qualcomm Technologies, Inc. DB820c (DT) Call trace: dump_backtrace.part.0+0xe4/0xf0 show_stack+0x18/0x40 dump_stack_lvl+0x88/0xb4 dump_stack+0x18/0x34 __might_resched+0x170/0x254 __might_sleep+0x48/0x9c __mutex_lock+0x4c/0x400 mutex_lock_nested+0x2c/0x40 lpg_brightness_single_set+0x40/0x90 led_set_brightness_nosleep+0x34/0x60 led_heartbeat_function+0x80/0x170 call_timer_fn+0xb8/0x340 __run_timers.part.0+0x20c/0x254 run_timer_softirq+0x3c/0x7c _stext+0x14c/0x578 ____do_softirq+0x10/0x20 call_on_irq_stack+0x2c/0x5c do_softirq_own_stack+0x1c/0x30 __irq_exit_rcu+0x164/0x170 irq_exit_rcu+0x10/0x40 el1_interrupt+0x38/0x50 el1h_64_irq_handler+0x18/0x2c el1h_64_irq+0x64/0x68 cpuidle_enter_state+0xc8/0x380 cpuidle_enter+0x38/0x50 do_idle+0x244/0x2d0 cpu_startup_entry+0x24/0x30 rest_init+0x128/0x1a0 arch_post_acpi_subsys_init+0x0/0x18 start_kernel+0x6f4/0x734 __primary_switched+0xbc/0xc4 Fixes: 24e2d05 ("leds: Add driver for Qualcomm LPG") Signed-off-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Pavel Machek <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 3031993 ] lpg_brighness_set() function can sleep, while led's brightness_set() callback must be non-blocking. Change LPG driver to use brightness_set_blocking() instead. BUG: sleeping function called from invalid context at kernel/locking/mutex.c:580 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 0, name: swapper/0 preempt_count: 101, expected: 0 INFO: lockdep is turned off. CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 6.1.0-rc1-00014-gbe99b089c6fc-dirty #85 Hardware name: Qualcomm Technologies, Inc. DB820c (DT) Call trace: dump_backtrace.part.0+0xe4/0xf0 show_stack+0x18/0x40 dump_stack_lvl+0x88/0xb4 dump_stack+0x18/0x34 __might_resched+0x170/0x254 __might_sleep+0x48/0x9c __mutex_lock+0x4c/0x400 mutex_lock_nested+0x2c/0x40 lpg_brightness_single_set+0x40/0x90 led_set_brightness_nosleep+0x34/0x60 led_heartbeat_function+0x80/0x170 call_timer_fn+0xb8/0x340 __run_timers.part.0+0x20c/0x254 run_timer_softirq+0x3c/0x7c _stext+0x14c/0x578 ____do_softirq+0x10/0x20 call_on_irq_stack+0x2c/0x5c do_softirq_own_stack+0x1c/0x30 __irq_exit_rcu+0x164/0x170 irq_exit_rcu+0x10/0x40 el1_interrupt+0x38/0x50 el1h_64_irq_handler+0x18/0x2c el1h_64_irq+0x64/0x68 cpuidle_enter_state+0xc8/0x380 cpuidle_enter+0x38/0x50 do_idle+0x244/0x2d0 cpu_startup_entry+0x24/0x30 rest_init+0x128/0x1a0 arch_post_acpi_subsys_init+0x0/0x18 start_kernel+0x6f4/0x734 __primary_switched+0xbc/0xc4 Fixes: 24e2d05 ("leds: Add driver for Qualcomm LPG") Signed-off-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Pavel Machek <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

commit 745f17a upstream. We got a WARNING in ext4_add_complete_io: ================================================================== WARNING: at fs/ext4/page-io.c:231 ext4_put_io_end_defer+0x182/0x250 CPU: 10 PID: 77 Comm: ksoftirqd/10 Tainted: 6.3.0-rc2 #85 RIP: 0010:ext4_put_io_end_defer+0x182/0x250 [ext4] [...] Call Trace: <TASK> ext4_end_bio+0xa8/0x240 [ext4] bio_endio+0x195/0x310 blk_update_request+0x184/0x770 scsi_end_request+0x2f/0x240 scsi_io_completion+0x75/0x450 scsi_finish_command+0xef/0x160 scsi_complete+0xa3/0x180 blk_complete_reqs+0x60/0x80 blk_done_softirq+0x25/0x40 __do_softirq+0x119/0x4c8 run_ksoftirqd+0x42/0x70 smpboot_thread_fn+0x136/0x3c0 kthread+0x140/0x1a0 ret_from_fork+0x2c/0x50 ================================================================== Above issue may happen as follows: cpu1 cpu2 ----------------------------|---------------------------- mount -o dioread_lock ext4_writepages ext4_do_writepages *if (ext4_should_dioread_nolock(inode))* // rsv_blocks is not assigned here mount -o remount,dioread_nolock ext4_journal_start_with_reserve __ext4_journal_start __ext4_journal_start_sb jbd2__journal_start *if (rsv_blocks)* // h_rsv_handle is not initialized here mpage_map_and_submit_extent mpage_map_one_extent dioread_nolock = ext4_should_dioread_nolock(inode) if (dioread_nolock && (map->m_flags & EXT4_MAP_UNWRITTEN)) mpd->io_submit.io_end->handle = handle->h_rsv_handle ext4_set_io_unwritten_flag io_end->flag |= EXT4_IO_END_UNWRITTEN // now io_end->handle is NULL but has EXT4_IO_END_UNWRITTEN flag scsi_finish_command scsi_io_completion scsi_io_completion_action scsi_end_request blk_update_request req_bio_endio bio_endio bio->bi_end_io > ext4_end_bio ext4_put_io_end_defer ext4_add_complete_io // trigger WARN_ON(!io_end->handle && sbi->s_journal); The immediate cause of this problem is that ext4_should_dioread_nolock() function returns inconsistent values in the ext4_do_writepages() and mpage_map_one_extent(). There are four conditions in this function that can be changed at mount time to cause this problem. These four conditions can be divided into two categories: (1) journal_data and EXT4_EXTENTS_FL, which can be changed by ioctl (2) DELALLOC and DIOREAD_NOLOCK, which can be changed by remount The two in the first category have been fixed by commit c8585c6 ("ext4: fix races between changing inode journal mode and ext4_writepages") and commit cb85f4d ("ext4: fix race between writepages and enabling EXT4_EXTENTS_FL") respectively. Two cases in the other category have not yet been fixed, and the above issue is caused by this situation. We refer to the fix for the first category, when applying options during remount, we grab s_writepages_rwsem to avoid racing with writepages ops to trigger this problem. Fixes: 6b523df ("ext4: use transaction reservation for extent conversion in ext4_end_io") Cc: [email protected] Signed-off-by: Baokun Li <[email protected]> Reviewed-by: Jan Kara <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Theodore Ts'o <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

scx: Move scx_ops_enable_state_str[] outside CONFIG_SCHED_DEBUG

commit 2acc59d upstream. When I was testing mongodb over bcachefs with compression, there is a lockdep warning when snapshotting mongodb data volume. $ cat test.sh prog=bcachefs $prog subvolume create /mnt/data $prog subvolume create /mnt/data/snapshots while true;do $prog subvolume snapshot /mnt/data /mnt/data/snapshots/$(date +%s) sleep 1s done $ cat /etc/mongodb.conf systemLog: destination: file logAppend: true path: /mnt/data/mongod.log storage: dbPath: /mnt/data/ lockdep reports: [ 3437.452330] ====================================================== [ 3437.452750] WARNING: possible circular locking dependency detected [ 3437.453168] 6.7.0-rc7-custom+ #85 Tainted: G E [ 3437.453562] ------------------------------------------------------ [ 3437.453981] bcachefs/35533 is trying to acquire lock: [ 3437.454325] ffffa0a02b2b1418 (sb_writers#10){.+.+}-{0:0}, at: filename_create+0x62/0x190 [ 3437.454875] but task is already holding lock: [ 3437.455268] ffffa0a02b2b10e0 (&type->s_umount_key#48){.+.+}-{3:3}, at: bch2_fs_file_ioctl+0x232/0xc90 [bcachefs] [ 3437.456009] which lock already depends on the new lock. [ 3437.456553] the existing dependency chain (in reverse order) is: [ 3437.457054] -> #3 (&type->s_umount_key#48){.+.+}-{3:3}: [ 3437.457507] down_read+0x3e/0x170 [ 3437.457772] bch2_fs_file_ioctl+0x232/0xc90 [bcachefs] [ 3437.458206] __x64_sys_ioctl+0x93/0xd0 [ 3437.458498] do_syscall_64+0x42/0xf0 [ 3437.458779] entry_SYSCALL_64_after_hwframe+0x6e/0x76 [ 3437.459155] -> #2 (&c->snapshot_create_lock){++++}-{3:3}: [ 3437.459615] down_read+0x3e/0x170 [ 3437.459878] bch2_truncate+0x82/0x110 [bcachefs] [ 3437.460276] bchfs_truncate+0x254/0x3c0 [bcachefs] [ 3437.460686] notify_change+0x1f1/0x4a0 [ 3437.461283] do_truncate+0x7f/0xd0 [ 3437.461555] path_openat+0xa57/0xce0 [ 3437.461836] do_filp_open+0xb4/0x160 [ 3437.462116] do_sys_openat2+0x91/0xc0 [ 3437.462402] __x64_sys_openat+0x53/0xa0 [ 3437.462701] do_syscall_64+0x42/0xf0 [ 3437.462982] entry_SYSCALL_64_after_hwframe+0x6e/0x76 [ 3437.463359] -> #1 (&sb->s_type->i_mutex_key#15){+.+.}-{3:3}: [ 3437.463843] down_write+0x3b/0xc0 [ 3437.464223] bch2_write_iter+0x5b/0xcc0 [bcachefs] [ 3437.464493] vfs_write+0x21b/0x4c0 [ 3437.464653] ksys_write+0x69/0xf0 [ 3437.464839] do_syscall_64+0x42/0xf0 [ 3437.465009] entry_SYSCALL_64_after_hwframe+0x6e/0x76 [ 3437.465231] -> #0 (sb_writers#10){.+.+}-{0:0}: [ 3437.465471] __lock_acquire+0x1455/0x21b0 [ 3437.465656] lock_acquire+0xc6/0x2b0 [ 3437.465822] mnt_want_write+0x46/0x1a0 [ 3437.465996] filename_create+0x62/0x190 [ 3437.466175] user_path_create+0x2d/0x50 [ 3437.466352] bch2_fs_file_ioctl+0x2ec/0xc90 [bcachefs] [ 3437.466617] __x64_sys_ioctl+0x93/0xd0 [ 3437.466791] do_syscall_64+0x42/0xf0 [ 3437.466957] entry_SYSCALL_64_after_hwframe+0x6e/0x76 [ 3437.467180] other info that might help us debug this: [ 3437.469670] 2 locks held by bcachefs/35533: other info that might help us debug this: [ 3437.467507] Chain exists of: sb_writers#10 --> &c->snapshot_create_lock --> &type->s_umount_key#48 [ 3437.467979] Possible unsafe locking scenario: [ 3437.468223] CPU0 CPU1 [ 3437.468405] ---- ---- [ 3437.468585] rlock(&type->s_umount_key#48); [ 3437.468758] lock(&c->snapshot_create_lock); [ 3437.469030] lock(&type->s_umount_key#48); [ 3437.469291] rlock(sb_writers#10); [ 3437.469434] *** DEADLOCK *** [ 3437.469670] 2 locks held by bcachefs/35533: [ 3437.469838] #0: ffffa0a02ce00a88 (&c->snapshot_create_lock){++++}-{3:3}, at: bch2_fs_file_ioctl+0x1e3/0xc90 [bcachefs] [ 3437.470294] #1: ffffa0a02b2b10e0 (&type->s_umount_key#48){.+.+}-{3:3}, at: bch2_fs_file_ioctl+0x232/0xc90 [bcachefs] [ 3437.470744] stack backtrace: [ 3437.470922] CPU: 7 PID: 35533 Comm: bcachefs Kdump: loaded Tainted: G E 6.7.0-rc7-custom+ #85 [ 3437.471313] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014 [ 3437.471694] Call Trace: [ 3437.471795] <TASK> [ 3437.471884] dump_stack_lvl+0x57/0x90 [ 3437.472035] check_noncircular+0x132/0x150 [ 3437.472202] __lock_acquire+0x1455/0x21b0 [ 3437.472369] lock_acquire+0xc6/0x2b0 [ 3437.472518] ? filename_create+0x62/0x190 [ 3437.472683] ? lock_is_held_type+0x97/0x110 [ 3437.472856] mnt_want_write+0x46/0x1a0 [ 3437.473025] ? filename_create+0x62/0x190 [ 3437.473204] filename_create+0x62/0x190 [ 3437.473380] user_path_create+0x2d/0x50 [ 3437.473555] bch2_fs_file_ioctl+0x2ec/0xc90 [bcachefs] [ 3437.473819] ? lock_acquire+0xc6/0x2b0 [ 3437.474002] ? __fget_files+0x2a/0x190 [ 3437.474195] ? __fget_files+0xbc/0x190 [ 3437.474380] ? lock_release+0xc5/0x270 [ 3437.474567] ? __x64_sys_ioctl+0x93/0xd0 [ 3437.474764] ? __pfx_bch2_fs_file_ioctl+0x10/0x10 [bcachefs] [ 3437.475090] __x64_sys_ioctl+0x93/0xd0 [ 3437.475277] do_syscall_64+0x42/0xf0 [ 3437.475454] entry_SYSCALL_64_after_hwframe+0x6e/0x76 [ 3437.475691] RIP: 0033:0x7f2743c313af ====================================================== In __bch2_ioctl_subvolume_create(), we grab s_umount unconditionally and unlock it at the end of the function. There is a comment "why do we need this lock?" about the lock coming from commit 42d2373 ("bcachefs: Snapshot creation, deletion") The reason is that __bch2_ioctl_subvolume_create() calls sync_inodes_sb() which enforce locked s_umount to writeback all dirty nodes before doing snapshot works. Fix it by read locking s_umount for snapshotting only and unlocking s_umount after sync_inodes_sb(). Signed-off-by: Su Yue <[email protected]> Signed-off-by: Kent Overstreet <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

@2

[ Upstream commit 8ecf3c1 ] Recent additions in BPF like cpu v4 instructions, test_bpf module exhibits the following failures: test_bpf: #82 ALU_MOVSX | BPF_B jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times) test_bpf: #83 ALU_MOVSX | BPF_H jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times) test_bpf: #84 ALU64_MOVSX | BPF_B jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times) test_bpf: #85 ALU64_MOVSX | BPF_H jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times) test_bpf: #86 ALU64_MOVSX | BPF_W jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times) test_bpf: #165 ALU_SDIV_X: -6 / 2 = -3 jited:1 ret 2147483645 != -3 (0x7ffffffd != 0xfffffffd)FAIL (1 times) test_bpf: #166 ALU_SDIV_K: -6 / 2 = -3 jited:1 ret 2147483645 != -3 (0x7ffffffd != 0xfffffffd)FAIL (1 times) test_bpf: #169 ALU_SMOD_X: -7 % 2 = -1 jited:1 ret 1 != -1 (0x1 != 0xffffffff)FAIL (1 times) test_bpf: #170 ALU_SMOD_K: -7 % 2 = -1 jited:1 ret 1 != -1 (0x1 != 0xffffffff)FAIL (1 times) test_bpf: #172 ALU64_SMOD_K: -7 % 2 = -1 jited:1 ret 1 != -1 (0x1 != 0xffffffff)FAIL (1 times) test_bpf: #313 BSWAP 16: 0x0123456789abcdef -> 0xefcd eBPF filter opcode 00d7 (@2) unsupported jited:0 301 PASS test_bpf: #314 BSWAP 32: 0x0123456789abcdef -> 0xefcdab89 eBPF filter opcode 00d7 (@2) unsupported jited:0 555 PASS test_bpf: #315 BSWAP 64: 0x0123456789abcdef -> 0x67452301 eBPF filter opcode 00d7 (@2) unsupported jited:0 268 PASS test_bpf: #316 BSWAP 64: 0x0123456789abcdef >> 32 -> 0xefcdab89 eBPF filter opcode 00d7 (@2) unsupported jited:0 269 PASS test_bpf: #317 BSWAP 16: 0xfedcba9876543210 -> 0x1032 eBPF filter opcode 00d7 (@2) unsupported jited:0 460 PASS test_bpf: #318 BSWAP 32: 0xfedcba9876543210 -> 0x10325476 eBPF filter opcode 00d7 (@2) unsupported jited:0 320 PASS test_bpf: #319 BSWAP 64: 0xfedcba9876543210 -> 0x98badcfe eBPF filter opcode 00d7 (@2) unsupported jited:0 222 PASS test_bpf: #320 BSWAP 64: 0xfedcba9876543210 >> 32 -> 0x10325476 eBPF filter opcode 00d7 (@2) unsupported jited:0 273 PASS test_bpf: #344 BPF_LDX_MEMSX | BPF_B eBPF filter opcode 0091 (@5) unsupported jited:0 432 PASS test_bpf: #345 BPF_LDX_MEMSX | BPF_H eBPF filter opcode 0089 (@5) unsupported jited:0 381 PASS test_bpf: #346 BPF_LDX_MEMSX | BPF_W eBPF filter opcode 0081 (@5) unsupported jited:0 505 PASS test_bpf: #490 JMP32_JA: Unconditional jump: if (true) return 1 eBPF filter opcode 0006 (@1) unsupported jited:0 261 PASS test_bpf: Summary: 1040 PASSED, 10 FAILED, [924/1038 JIT'ed] Fix them by adding missing processing. Fixes: daabb2b ("bpf/tests: add tests for cpuv4 instructions") Signed-off-by: Christophe Leroy <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://msgid.link/91de862dda99d170697eb79ffb478678af7e0b27.1709652689.git.christophe.leroy@csgroup.eu Signed-off-by: Sasha Levin <[email protected]>

Reading the dispatch trace log from /sys/kernel/debug/powerpc/dtl/cpu-* results in a BUG() when the config CONFIG_HARDENED_USERCOPY is enabled as shown below. kernel BUG at mm/usercopy.c:102! Oops: Exception in kernel mode, sig: 5 [#1] LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries Modules linked in: xfs libcrc32c dm_service_time sd_mod t10_pi sg ibmvfc scsi_transport_fc ibmveth pseries_wdt dm_multipath dm_mirror dm_region_hash dm_log dm_mod fuse CPU: 27 PID: 1815 Comm: python3 Not tainted 6.10.0-rc3 #85 Hardware name: IBM,9040-MRX POWER10 (raw) 0x800200 0xf000006 of:IBM,FW1060.00 (NM1060_042) hv:phyp pSeries NIP: c0000000005d23d4 LR: c0000000005d23d0 CTR: 00000000006ee6f8 REGS: c000000120c078c0 TRAP: 0700 Not tainted (6.10.0-rc3) MSR: 8000000000029033 <SF,EE,ME,IR,DR,RI,LE> CR: 2828220f XER: 0000000e CFAR: c0000000001fdc80 IRQMASK: 0 [ ... GPRs omitted ... ] NIP [c0000000005d23d4] usercopy_abort+0x78/0xb0 LR [c0000000005d23d0] usercopy_abort+0x74/0xb0 Call Trace: usercopy_abort+0x74/0xb0 (unreliable) __check_heap_object+0xf8/0x120 check_heap_object+0x218/0x240 __check_object_size+0x84/0x1a4 dtl_file_read+0x17c/0x2c4 full_proxy_read+0x8c/0x110 vfs_read+0xdc/0x3a0 ksys_read+0x84/0x144 system_call_exception+0x124/0x330 system_call_vectored_common+0x15c/0x2ec --- interrupt: 3000 at 0x7fff81f3ab34 Commit 6d07d1c ("usercopy: Restrict non-usercopy caches to size 0") requires that only whitelisted areas in slab/slub objects can be copied to userspace when usercopy hardening is enabled using CONFIG_HARDENED_USERCOPY. Dtl contains hypervisor dispatch events which are expected to be read by privileged users. Hence mark this safe for user access. Specify useroffset=0 and usersize=DISPATCH_LOG_BYTES to whitelist the entire object. Co-developed-by: Vishal Chourasia <[email protected]> Signed-off-by: Vishal Chourasia <[email protected]> Signed-off-by: Anjali K <[email protected]> Reviewed-by: Srikar Dronamraju <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://msgid.link/[email protected]

[ Upstream commit 1a14150 ] Reading the dispatch trace log from /sys/kernel/debug/powerpc/dtl/cpu-* results in a BUG() when the config CONFIG_HARDENED_USERCOPY is enabled as shown below. kernel BUG at mm/usercopy.c:102! Oops: Exception in kernel mode, sig: 5 [#1] LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries Modules linked in: xfs libcrc32c dm_service_time sd_mod t10_pi sg ibmvfc scsi_transport_fc ibmveth pseries_wdt dm_multipath dm_mirror dm_region_hash dm_log dm_mod fuse CPU: 27 PID: 1815 Comm: python3 Not tainted 6.10.0-rc3 #85 Hardware name: IBM,9040-MRX POWER10 (raw) 0x800200 0xf000006 of:IBM,FW1060.00 (NM1060_042) hv:phyp pSeries NIP: c0000000005d23d4 LR: c0000000005d23d0 CTR: 00000000006ee6f8 REGS: c000000120c078c0 TRAP: 0700 Not tainted (6.10.0-rc3) MSR: 8000000000029033 <SF,EE,ME,IR,DR,RI,LE> CR: 2828220f XER: 0000000e CFAR: c0000000001fdc80 IRQMASK: 0 [ ... GPRs omitted ... ] NIP [c0000000005d23d4] usercopy_abort+0x78/0xb0 LR [c0000000005d23d0] usercopy_abort+0x74/0xb0 Call Trace: usercopy_abort+0x74/0xb0 (unreliable) __check_heap_object+0xf8/0x120 check_heap_object+0x218/0x240 __check_object_size+0x84/0x1a4 dtl_file_read+0x17c/0x2c4 full_proxy_read+0x8c/0x110 vfs_read+0xdc/0x3a0 ksys_read+0x84/0x144 system_call_exception+0x124/0x330 system_call_vectored_common+0x15c/0x2ec --- interrupt: 3000 at 0x7fff81f3ab34 Commit 6d07d1c ("usercopy: Restrict non-usercopy caches to size 0") requires that only whitelisted areas in slab/slub objects can be copied to userspace when usercopy hardening is enabled using CONFIG_HARDENED_USERCOPY. Dtl contains hypervisor dispatch events which are expected to be read by privileged users. Hence mark this safe for user access. Specify useroffset=0 and usersize=DISPATCH_LOG_BYTES to whitelist the entire object. Co-developed-by: Vishal Chourasia <[email protected]> Signed-off-by: Vishal Chourasia <[email protected]> Signed-off-by: Anjali K <[email protected]> Reviewed-by: Srikar Dronamraju <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://msgid.link/[email protected] Signed-off-by: Sasha Levin <[email protected]>

Commit 94a23e9 ("cgroup: Disable cgroup "memory" by default") disabled the memory cgroup by default when initing the cgroups. However, it's possible to disable the memory cgroup by a kernel command line. Hard-coding such a feature can be problematic as some memory management features depend on the order that things are set. For example, it is possible to see a NULL pointer dereference caused by commit 94a23e9. The NULL pointer dereference is triggered by the memory shrinker and ends up in a kernel crash. [ 50.028629] ================================================================== [ 50.028645] BUG: KASAN: null-ptr-deref in do_shrink_slab+0x1fc/0x978 [ 50.028663] Write of size 8 at addr 0000000000000000 by task gfxrecon-replay/1965 [ 50.028676] CPU: 3 UID: 1000 PID: 1965 Comm: gfxrecon-replay Tainted: G C 6.12.0-rc4-v8-thp-kasan+ raspberrypi#85 [ 50.028685] Tainted: [C]=CRAP [ 50.028689] Hardware name: Raspberry Pi 5 Model B Rev 1.0 (DT) [ 50.028694] Call trace: [ 50.028697] dump_backtrace+0xfc/0x120 [ 50.028706] show_stack+0x24/0x38 [ 50.028711] dump_stack_lvl+0x40/0x88 [ 50.028720] print_report+0xe4/0x708 [ 50.028728] kasan_report+0xcc/0x130 [ 50.028733] kasan_check_range+0x254/0x298 [ 50.028738] __kasan_check_write+0x20/0x30 [ 50.028745] do_shrink_slab+0x1fc/0x978 [ 50.028751] shrink_slab+0x318/0xc38 [ 50.028756] shrink_one+0x254/0x6d8 [ 50.028762] shrink_node+0x26b4/0x2848 [ 50.028767] do_try_to_free_pages+0x3e4/0x1190 [ 50.028773] try_to_free_pages+0x5a4/0xb40 [ 50.028778] __alloc_pages_direct_reclaim+0x144/0x298 [ 50.028787] __alloc_pages_slowpath+0x5c4/0xc70 [ 50.028793] __alloc_pages_noprof+0x4a8/0x6a8 [ 50.028800] __folio_alloc_noprof+0x24/0xa8 [ 50.028806] shmem_alloc_and_add_folio+0x2ec/0xce0 [ 50.028812] shmem_get_folio_gfp+0x380/0xc20 [ 50.028818] shmem_read_folio_gfp+0xe0/0x160 [ 50.028824] drm_gem_get_pages+0x238/0x620 [drm] [ 50.029039] drm_gem_shmem_get_pages_sgt+0xd8/0x4b8 [drm_shmem_helper] [ 50.029053] v3d_bo_create_finish+0x58/0x1e0 [v3d] [ 50.029083] v3d_create_bo_ioctl+0xac/0x210 [v3d] [ 50.029105] drm_ioctl_kernel+0x1d8/0x2b8 [drm] [ 50.029220] drm_ioctl+0x4b4/0x920 [drm] [ 50.029330] __arm64_sys_ioctl+0x11c/0x160 [ 50.029337] invoke_syscall+0x88/0x268 [ 50.029345] el0_svc_common+0x160/0x1d8 [ 50.029351] do_el0_svc+0x50/0x68 [ 50.029358] el0_svc+0x34/0x80 [ 50.029364] el0t_64_sync_handler+0x84/0x100 [ 50.029371] el0t_64_sync+0x190/0x198 [ 50.029376] ================================================================== This happens because the memory shrinker is unaware that we are artificially disabling the memory cgroups and therefore it doesn't allocate `nr_deferred` (as it would if we used the kernel command line). To avoid such an issue, revert the artificial disablement and disable it through the command line. If a user wants to enable the feature, it can use the `cgroup_enable=` command line. Signed-off-by: Maíra Canal <[email protected]>

Commit 94a23e9 ("cgroup: Disable cgroup "memory" by default") disabled the memory cgroup by default when initing the cgroups. However, it's possible to disable the memory cgroup by a kernel command line. Hard-coding such a feature can be problematic as some memory management features depend on the order that things are set. For example, it is possible to see a NULL pointer dereference caused by commit 94a23e9. The NULL pointer dereference is triggered by the memory shrinker and ends up in a kernel crash. [ 50.028629] ================================================================== [ 50.028645] BUG: KASAN: null-ptr-deref in do_shrink_slab+0x1fc/0x978 [ 50.028663] Write of size 8 at addr 0000000000000000 by task gfxrecon-replay/1965 [ 50.028676] CPU: 3 UID: 1000 PID: 1965 Comm: gfxrecon-replay Tainted: G C 6.12.0-rc4-v8-thp-kasan+ #85 [ 50.028685] Tainted: [C]=CRAP [ 50.028689] Hardware name: Raspberry Pi 5 Model B Rev 1.0 (DT) [ 50.028694] Call trace: [ 50.028697] dump_backtrace+0xfc/0x120 [ 50.028706] show_stack+0x24/0x38 [ 50.028711] dump_stack_lvl+0x40/0x88 [ 50.028720] print_report+0xe4/0x708 [ 50.028728] kasan_report+0xcc/0x130 [ 50.028733] kasan_check_range+0x254/0x298 [ 50.028738] __kasan_check_write+0x20/0x30 [ 50.028745] do_shrink_slab+0x1fc/0x978 [ 50.028751] shrink_slab+0x318/0xc38 [ 50.028756] shrink_one+0x254/0x6d8 [ 50.028762] shrink_node+0x26b4/0x2848 [ 50.028767] do_try_to_free_pages+0x3e4/0x1190 [ 50.028773] try_to_free_pages+0x5a4/0xb40 [ 50.028778] __alloc_pages_direct_reclaim+0x144/0x298 [ 50.028787] __alloc_pages_slowpath+0x5c4/0xc70 [ 50.028793] __alloc_pages_noprof+0x4a8/0x6a8 [ 50.028800] __folio_alloc_noprof+0x24/0xa8 [ 50.028806] shmem_alloc_and_add_folio+0x2ec/0xce0 [ 50.028812] shmem_get_folio_gfp+0x380/0xc20 [ 50.028818] shmem_read_folio_gfp+0xe0/0x160 [ 50.028824] drm_gem_get_pages+0x238/0x620 [drm] [ 50.029039] drm_gem_shmem_get_pages_sgt+0xd8/0x4b8 [drm_shmem_helper] [ 50.029053] v3d_bo_create_finish+0x58/0x1e0 [v3d] [ 50.029083] v3d_create_bo_ioctl+0xac/0x210 [v3d] [ 50.029105] drm_ioctl_kernel+0x1d8/0x2b8 [drm] [ 50.029220] drm_ioctl+0x4b4/0x920 [drm] [ 50.029330] __arm64_sys_ioctl+0x11c/0x160 [ 50.029337] invoke_syscall+0x88/0x268 [ 50.029345] el0_svc_common+0x160/0x1d8 [ 50.029351] do_el0_svc+0x50/0x68 [ 50.029358] el0_svc+0x34/0x80 [ 50.029364] el0t_64_sync_handler+0x84/0x100 [ 50.029371] el0t_64_sync+0x190/0x198 [ 50.029376] ================================================================== This happens because the memory shrinker is unaware that we are artificially disabling the memory cgroups and therefore it doesn't allocate `nr_deferred` (as it would if we used the kernel command line). To avoid such an issue, revert the artificial disablement and disable it through the command line. If a user wants to enable the feature, it can use the `cgroup_enable=` command line. Signed-off-by: Maíra Canal <[email protected]>

[ Upstream commit 7b0033d ] In my test case, concurrent calls to f2fs shutdown report the following stack trace: Oops: general protection fault, probably for non-canonical address 0xc6cfff63bb5513fc: 0000 [#1] PREEMPT SMP PTI CPU: 0 UID: 0 PID: 678 Comm: f2fs_rep_shutdo Not tainted 6.12.0-rc5-next-20241029-g6fb2fa9805c5-dirty #85 Call Trace: <TASK> ? show_regs+0x8b/0xa0 ? __die_body+0x26/0xa0 ? die_addr+0x54/0x90 ? exc_general_protection+0x24b/0x5c0 ? asm_exc_general_protection+0x26/0x30 ? kthread_stop+0x46/0x390 f2fs_stop_gc_thread+0x6c/0x110 f2fs_do_shutdown+0x309/0x3a0 f2fs_ioc_shutdown+0x150/0x1c0 __f2fs_ioctl+0xffd/0x2ac0 f2fs_ioctl+0x76/0xe0 vfs_ioctl+0x23/0x60 __x64_sys_ioctl+0xce/0xf0 x64_sys_call+0x2b1b/0x4540 do_syscall_64+0xa7/0x240 entry_SYSCALL_64_after_hwframe+0x76/0x7e The root cause is a race condition in f2fs_stop_gc_thread() called from different f2fs shutdown paths: [CPU0] [CPU1] ---------------------- ----------------------- f2fs_stop_gc_thread f2fs_stop_gc_thread gc_th = sbi->gc_thread gc_th = sbi->gc_thread kfree(gc_th) sbi->gc_thread = NULL < gc_th != NULL > kthread_stop(gc_th->f2fs_gc_task) //UAF The commit c7f114d ("f2fs: fix to avoid use-after-free in f2fs_stop_gc_thread()") attempted to fix this issue by using a read semaphore to prevent races between shutdown and remount threads, but it fails to prevent all race conditions. Fix it by converting to write lock of s_umount in f2fs_do_shutdown(). Fixes: 7950e9a ("f2fs: stop gc/discard thread after fs shutdown") Signed-off-by: Long Li <[email protected]> Reviewed-by: Chao Yu <[email protected]> Signed-off-by: Jaegeuk Kim <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

Update Synopsys USB OTG driver to v2.94a and disable CRYPTOLIB

df9a562

popcornmix added a commit that referenced this pull request Aug 15, 2012

Merge pull request #85 from ddv2005/rpi-patches

775d4ce

Update Synopsys USB OTG driver to v2.94a and disable CRYPTOLIB. Third attempt

popcornmix merged commit 775d4ce into raspberrypi:rpi-patches Aug 15, 2012

0lxb pushed a commit to 0lxb/rpi_linux that referenced this pull request Jan 30, 2024

Merge pull request raspberrypi#85 from sched-ext/misc-fixes

e69323c

scx: Move scx_ops_enable_state_str[] outside CONFIG_SCHED_DEBUG

mairacanal mentioned this pull request Oct 24, 2024

cgroup: Use kernel command line to disable memory cgroup #6439

Merged

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Update Synopsys USB OTG driver to v2.94a and disable CRYPTOLIB. Third attempt #85

Update Synopsys USB OTG driver to v2.94a and disable CRYPTOLIB. Third attempt #85

ddv2005 commented Aug 15, 2012

popcornmix commented Aug 15, 2012

Update Synopsys USB OTG driver to v2.94a and disable CRYPTOLIB. Third attempt #85

Update Synopsys USB OTG driver to v2.94a and disable CRYPTOLIB. Third attempt #85

Conversation

ddv2005 commented Aug 15, 2012

popcornmix commented Aug 15, 2012