3.10 does not compile (implicit declaration... vc_cma*) #324
Comments
moonman
referenced
this issue
in archlinuxarm/PKGBUILDs
Jul 4, 2013
|
I can confirm that I have the same issue. |
|
This is why. Function has been removed from upstream. |
|
What helped is I disabled bcm_vc_cma driver in config and it compiles, though I'm not too sure what functionality will be lost without this driver. Since default config does not enable this driver I guess it is not that important. |
|
The following patch fixes it. Please, review: |
|
Will build the kernel tonight. Thanks for working on this! |
Closed
popcornmix
pushed a commit
that referenced
this issue
Jul 21, 2021
…format [ Upstream commit 06d213d ] For incoming SCO connection with transparent coding format, alt setting of CVSD is getting applied instead of Transparent. Before fix: < HCI Command: Accept Synchron.. (0x01|0x0029) plen 21 #2196 [hci0] 321.342548 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Transmit bandwidth: 8000 Receive bandwidth: 8000 Max latency: 13 Setting: 0x0003 Input Coding: Linear Input Data Format: 1's complement Input Sample Size: 8-bit # of bits padding at MSB: 0 Air Coding Format: Transparent Data Retransmission effort: Optimize for link quality (0x02) Packet type: 0x003f HV1 may be used HV2 may be used HV3 may be used EV3 may be used EV4 may be used EV5 may be used > HCI Event: Command Status (0x0f) plen 4 #2197 [hci0] 321.343585 Accept Synchronous Connection Request (0x01|0x0029) ncmd 1 Status: Success (0x00) > HCI Event: Synchronous Connect Comp.. (0x2c) plen 17 #2198 [hci0] 321.351666 Status: Success (0x00) Handle: 257 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Link type: eSCO (0x02) Transmission interval: 0x0c Retransmission window: 0x04 RX packet length: 60 TX packet length: 60 Air mode: Transparent (0x03) ........ > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2336 [hci0] 321.383655 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2337 [hci0] 321.389558 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2338 [hci0] 321.393615 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2339 [hci0] 321.393618 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2340 [hci0] 321.393618 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2341 [hci0] 321.397070 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2342 [hci0] 321.403622 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2343 [hci0] 321.403625 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2344 [hci0] 321.403625 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2345 [hci0] 321.403625 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2346 [hci0] 321.404569 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2347 [hci0] 321.412091 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2348 [hci0] 321.413626 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2349 [hci0] 321.413630 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2350 [hci0] 321.413630 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2351 [hci0] 321.419674 After fix: < HCI Command: Accept Synchronou.. (0x01|0x0029) plen 21 #309 [hci0] 49.439693 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Transmit bandwidth: 8000 Receive bandwidth: 8000 Max latency: 13 Setting: 0x0003 Input Coding: Linear Input Data Format: 1's complement Input Sample Size: 8-bit # of bits padding at MSB: 0 Air Coding Format: Transparent Data Retransmission effort: Optimize for link quality (0x02) Packet type: 0x003f HV1 may be used HV2 may be used HV3 may be used EV3 may be used EV4 may be used EV5 may be used > HCI Event: Command Status (0x0f) plen 4 #310 [hci0] 49.440308 Accept Synchronous Connection Request (0x01|0x0029) ncmd 1 Status: Success (0x00) > HCI Event: Synchronous Connect Complete (0x2c) plen 17 #311 [hci0] 49.449308 Status: Success (0x00) Handle: 257 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Link type: eSCO (0x02) Transmission interval: 0x0c Retransmission window: 0x04 RX packet length: 60 TX packet length: 60 Air mode: Transparent (0x03) < SCO Data TX: Handle 257 flags 0x00 dlen 60 #312 [hci0] 49.450421 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #313 [hci0] 49.457927 > HCI Event: Max Slots Change (0x1b) plen 3 #314 [hci0] 49.460345 Handle: 256 Max slots: 5 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #315 [hci0] 49.465453 > SCO Data RX: Handle 257 flags 0x00 dlen 60 #316 [hci0] 49.470502 > SCO Data RX: Handle 257 flags 0x00 dlen 60 #317 [hci0] 49.470519 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #318 [hci0] 49.472996 > SCO Data RX: Handle 257 flags 0x00 dlen 60 #319 [hci0] 49.480412 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #320 [hci0] 49.480492 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #321 [hci0] 49.487989 > SCO Data RX: Handle 257 flags 0x00 dlen 60 #322 [hci0] 49.490303 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #323 [hci0] 49.495496 > SCO Data RX: Handle 257 flags 0x00 dlen 60 #324 [hci0] 49.500304 > SCO Data RX: Handle 257 flags 0x00 dlen 60 #325 [hci0] 49.500311 Signed-off-by: Kiran K <[email protected]> Signed-off-by: Lokendra Singh <[email protected]> Signed-off-by: Marcel Holtmann <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
popcornmix
pushed a commit
that referenced
this issue
Jul 22, 2021
…format [ Upstream commit 06d213d ] For incoming SCO connection with transparent coding format, alt setting of CVSD is getting applied instead of Transparent. Before fix: < HCI Command: Accept Synchron.. (0x01|0x0029) plen 21 #2196 [hci0] 321.342548 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Transmit bandwidth: 8000 Receive bandwidth: 8000 Max latency: 13 Setting: 0x0003 Input Coding: Linear Input Data Format: 1's complement Input Sample Size: 8-bit # of bits padding at MSB: 0 Air Coding Format: Transparent Data Retransmission effort: Optimize for link quality (0x02) Packet type: 0x003f HV1 may be used HV2 may be used HV3 may be used EV3 may be used EV4 may be used EV5 may be used > HCI Event: Command Status (0x0f) plen 4 #2197 [hci0] 321.343585 Accept Synchronous Connection Request (0x01|0x0029) ncmd 1 Status: Success (0x00) > HCI Event: Synchronous Connect Comp.. (0x2c) plen 17 #2198 [hci0] 321.351666 Status: Success (0x00) Handle: 257 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Link type: eSCO (0x02) Transmission interval: 0x0c Retransmission window: 0x04 RX packet length: 60 TX packet length: 60 Air mode: Transparent (0x03) ........ > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2336 [hci0] 321.383655 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2337 [hci0] 321.389558 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2338 [hci0] 321.393615 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2339 [hci0] 321.393618 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2340 [hci0] 321.393618 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2341 [hci0] 321.397070 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2342 [hci0] 321.403622 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2343 [hci0] 321.403625 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2344 [hci0] 321.403625 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2345 [hci0] 321.403625 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2346 [hci0] 321.404569 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2347 [hci0] 321.412091 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2348 [hci0] 321.413626 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2349 [hci0] 321.413630 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2350 [hci0] 321.413630 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2351 [hci0] 321.419674 After fix: < HCI Command: Accept Synchronou.. (0x01|0x0029) plen 21 #309 [hci0] 49.439693 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Transmit bandwidth: 8000 Receive bandwidth: 8000 Max latency: 13 Setting: 0x0003 Input Coding: Linear Input Data Format: 1's complement Input Sample Size: 8-bit # of bits padding at MSB: 0 Air Coding Format: Transparent Data Retransmission effort: Optimize for link quality (0x02) Packet type: 0x003f HV1 may be used HV2 may be used HV3 may be used EV3 may be used EV4 may be used EV5 may be used > HCI Event: Command Status (0x0f) plen 4 #310 [hci0] 49.440308 Accept Synchronous Connection Request (0x01|0x0029) ncmd 1 Status: Success (0x00) > HCI Event: Synchronous Connect Complete (0x2c) plen 17 #311 [hci0] 49.449308 Status: Success (0x00) Handle: 257 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Link type: eSCO (0x02) Transmission interval: 0x0c Retransmission window: 0x04 RX packet length: 60 TX packet length: 60 Air mode: Transparent (0x03) < SCO Data TX: Handle 257 flags 0x00 dlen 60 #312 [hci0] 49.450421 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #313 [hci0] 49.457927 > HCI Event: Max Slots Change (0x1b) plen 3 #314 [hci0] 49.460345 Handle: 256 Max slots: 5 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #315 [hci0] 49.465453 > SCO Data RX: Handle 257 flags 0x00 dlen 60 #316 [hci0] 49.470502 > SCO Data RX: Handle 257 flags 0x00 dlen 60 #317 [hci0] 49.470519 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #318 [hci0] 49.472996 > SCO Data RX: Handle 257 flags 0x00 dlen 60 #319 [hci0] 49.480412 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #320 [hci0] 49.480492 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #321 [hci0] 49.487989 > SCO Data RX: Handle 257 flags 0x00 dlen 60 #322 [hci0] 49.490303 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #323 [hci0] 49.495496 > SCO Data RX: Handle 257 flags 0x00 dlen 60 #324 [hci0] 49.500304 > SCO Data RX: Handle 257 flags 0x00 dlen 60 #325 [hci0] 49.500311 Signed-off-by: Kiran K <[email protected]> Signed-off-by: Lokendra Singh <[email protected]> Signed-off-by: Marcel Holtmann <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
popcornmix
pushed a commit
that referenced
this issue
Jul 27, 2021
…format [ Upstream commit 06d213d ] For incoming SCO connection with transparent coding format, alt setting of CVSD is getting applied instead of Transparent. Before fix: < HCI Command: Accept Synchron.. (0x01|0x0029) plen 21 #2196 [hci0] 321.342548 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Transmit bandwidth: 8000 Receive bandwidth: 8000 Max latency: 13 Setting: 0x0003 Input Coding: Linear Input Data Format: 1's complement Input Sample Size: 8-bit # of bits padding at MSB: 0 Air Coding Format: Transparent Data Retransmission effort: Optimize for link quality (0x02) Packet type: 0x003f HV1 may be used HV2 may be used HV3 may be used EV3 may be used EV4 may be used EV5 may be used > HCI Event: Command Status (0x0f) plen 4 #2197 [hci0] 321.343585 Accept Synchronous Connection Request (0x01|0x0029) ncmd 1 Status: Success (0x00) > HCI Event: Synchronous Connect Comp.. (0x2c) plen 17 #2198 [hci0] 321.351666 Status: Success (0x00) Handle: 257 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Link type: eSCO (0x02) Transmission interval: 0x0c Retransmission window: 0x04 RX packet length: 60 TX packet length: 60 Air mode: Transparent (0x03) ........ > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2336 [hci0] 321.383655 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2337 [hci0] 321.389558 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2338 [hci0] 321.393615 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2339 [hci0] 321.393618 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2340 [hci0] 321.393618 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2341 [hci0] 321.397070 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2342 [hci0] 321.403622 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2343 [hci0] 321.403625 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2344 [hci0] 321.403625 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2345 [hci0] 321.403625 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2346 [hci0] 321.404569 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2347 [hci0] 321.412091 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2348 [hci0] 321.413626 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2349 [hci0] 321.413630 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2350 [hci0] 321.413630 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2351 [hci0] 321.419674 After fix: < HCI Command: Accept Synchronou.. (0x01|0x0029) plen 21 #309 [hci0] 49.439693 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Transmit bandwidth: 8000 Receive bandwidth: 8000 Max latency: 13 Setting: 0x0003 Input Coding: Linear Input Data Format: 1's complement Input Sample Size: 8-bit # of bits padding at MSB: 0 Air Coding Format: Transparent Data Retransmission effort: Optimize for link quality (0x02) Packet type: 0x003f HV1 may be used HV2 may be used HV3 may be used EV3 may be used EV4 may be used EV5 may be used > HCI Event: Command Status (0x0f) plen 4 #310 [hci0] 49.440308 Accept Synchronous Connection Request (0x01|0x0029) ncmd 1 Status: Success (0x00) > HCI Event: Synchronous Connect Complete (0x2c) plen 17 #311 [hci0] 49.449308 Status: Success (0x00) Handle: 257 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Link type: eSCO (0x02) Transmission interval: 0x0c Retransmission window: 0x04 RX packet length: 60 TX packet length: 60 Air mode: Transparent (0x03) < SCO Data TX: Handle 257 flags 0x00 dlen 60 #312 [hci0] 49.450421 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #313 [hci0] 49.457927 > HCI Event: Max Slots Change (0x1b) plen 3 #314 [hci0] 49.460345 Handle: 256 Max slots: 5 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #315 [hci0] 49.465453 > SCO Data RX: Handle 257 flags 0x00 dlen 60 #316 [hci0] 49.470502 > SCO Data RX: Handle 257 flags 0x00 dlen 60 #317 [hci0] 49.470519 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #318 [hci0] 49.472996 > SCO Data RX: Handle 257 flags 0x00 dlen 60 #319 [hci0] 49.480412 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #320 [hci0] 49.480492 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #321 [hci0] 49.487989 > SCO Data RX: Handle 257 flags 0x00 dlen 60 #322 [hci0] 49.490303 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #323 [hci0] 49.495496 > SCO Data RX: Handle 257 flags 0x00 dlen 60 #324 [hci0] 49.500304 > SCO Data RX: Handle 257 flags 0x00 dlen 60 #325 [hci0] 49.500311 Signed-off-by: Kiran K <[email protected]> Signed-off-by: Lokendra Singh <[email protected]> Signed-off-by: Marcel Holtmann <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
popcornmix
pushed a commit
that referenced
this issue
Nov 22, 2021
[ Upstream commit 1030d68 ] I've got the following splat after enabling preemption: [ 3.724721] BUG: using __this_cpu_add() in preemptible [00000000] code: swapper/0/1 [ 3.734630] caller is __this_cpu_preempt_check+0x38/0x50 [ 3.740635] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.15.0-rc4-64bit+ #324 [ 3.744605] Hardware name: 9000/785/C8000 [ 3.744605] Backtrace: [ 3.744605] [<00000000401d9d58>] show_stack+0x74/0xb0 [ 3.744605] [<0000000040c27bd4>] dump_stack_lvl+0x10c/0x188 [ 3.744605] [<0000000040c27c84>] dump_stack+0x34/0x48 [ 3.744605] [<0000000040c33438>] check_preemption_disabled+0x178/0x1b0 [ 3.744605] [<0000000040c334f8>] __this_cpu_preempt_check+0x38/0x50 [ 3.744605] [<00000000401d632c>] flush_tlb_all+0x58/0x2e0 [ 3.744605] [<00000000401075c0>] 0x401075c0 [ 3.744605] [<000000004010b8fc>] 0x4010b8fc [ 3.744605] [<00000000401080fc>] 0x401080fc [ 3.744605] [<00000000401d5224>] do_one_initcall+0x128/0x378 [ 3.744605] [<0000000040102de8>] 0x40102de8 [ 3.744605] [<0000000040c33864>] kernel_init+0x60/0x3a8 [ 3.744605] [<00000000401d1020>] ret_from_kernel_thread+0x20/0x28 [ 3.744605] Fix this by moving the __inc_irq_stat() into the locked section. Signed-off-by: Sven Schnelle <[email protected]> Signed-off-by: Helge Deller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
popcornmix
pushed a commit
that referenced
this issue
Nov 22, 2021
[ Upstream commit 1030d68 ] I've got the following splat after enabling preemption: [ 3.724721] BUG: using __this_cpu_add() in preemptible [00000000] code: swapper/0/1 [ 3.734630] caller is __this_cpu_preempt_check+0x38/0x50 [ 3.740635] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.15.0-rc4-64bit+ #324 [ 3.744605] Hardware name: 9000/785/C8000 [ 3.744605] Backtrace: [ 3.744605] [<00000000401d9d58>] show_stack+0x74/0xb0 [ 3.744605] [<0000000040c27bd4>] dump_stack_lvl+0x10c/0x188 [ 3.744605] [<0000000040c27c84>] dump_stack+0x34/0x48 [ 3.744605] [<0000000040c33438>] check_preemption_disabled+0x178/0x1b0 [ 3.744605] [<0000000040c334f8>] __this_cpu_preempt_check+0x38/0x50 [ 3.744605] [<00000000401d632c>] flush_tlb_all+0x58/0x2e0 [ 3.744605] [<00000000401075c0>] 0x401075c0 [ 3.744605] [<000000004010b8fc>] 0x4010b8fc [ 3.744605] [<00000000401080fc>] 0x401080fc [ 3.744605] [<00000000401d5224>] do_one_initcall+0x128/0x378 [ 3.744605] [<0000000040102de8>] 0x40102de8 [ 3.744605] [<0000000040c33864>] kernel_init+0x60/0x3a8 [ 3.744605] [<00000000401d1020>] ret_from_kernel_thread+0x20/0x28 [ 3.744605] Fix this by moving the __inc_irq_stat() into the locked section. Signed-off-by: Sven Schnelle <[email protected]> Signed-off-by: Helge Deller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
popcornmix
pushed a commit
that referenced
this issue
Nov 29, 2021
[ Upstream commit 1030d68 ] I've got the following splat after enabling preemption: [ 3.724721] BUG: using __this_cpu_add() in preemptible [00000000] code: swapper/0/1 [ 3.734630] caller is __this_cpu_preempt_check+0x38/0x50 [ 3.740635] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.15.0-rc4-64bit+ #324 [ 3.744605] Hardware name: 9000/785/C8000 [ 3.744605] Backtrace: [ 3.744605] [<00000000401d9d58>] show_stack+0x74/0xb0 [ 3.744605] [<0000000040c27bd4>] dump_stack_lvl+0x10c/0x188 [ 3.744605] [<0000000040c27c84>] dump_stack+0x34/0x48 [ 3.744605] [<0000000040c33438>] check_preemption_disabled+0x178/0x1b0 [ 3.744605] [<0000000040c334f8>] __this_cpu_preempt_check+0x38/0x50 [ 3.744605] [<00000000401d632c>] flush_tlb_all+0x58/0x2e0 [ 3.744605] [<00000000401075c0>] 0x401075c0 [ 3.744605] [<000000004010b8fc>] 0x4010b8fc [ 3.744605] [<00000000401080fc>] 0x401080fc [ 3.744605] [<00000000401d5224>] do_one_initcall+0x128/0x378 [ 3.744605] [<0000000040102de8>] 0x40102de8 [ 3.744605] [<0000000040c33864>] kernel_init+0x60/0x3a8 [ 3.744605] [<00000000401d1020>] ret_from_kernel_thread+0x20/0x28 [ 3.744605] Fix this by moving the __inc_irq_stat() into the locked section. Signed-off-by: Sven Schnelle <[email protected]> Signed-off-by: Helge Deller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
nguyenanhgiau
pushed a commit
to nguyenanhgiau/linux
that referenced
this issue
Jan 5, 2022
[ Upstream commit 1030d68 ] I've got the following splat after enabling preemption: [ 3.724721] BUG: using __this_cpu_add() in preemptible [00000000] code: swapper/0/1 [ 3.734630] caller is __this_cpu_preempt_check+0x38/0x50 [ 3.740635] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.15.0-rc4-64bit+ raspberrypi#324 [ 3.744605] Hardware name: 9000/785/C8000 [ 3.744605] Backtrace: [ 3.744605] [<00000000401d9d58>] show_stack+0x74/0xb0 [ 3.744605] [<0000000040c27bd4>] dump_stack_lvl+0x10c/0x188 [ 3.744605] [<0000000040c27c84>] dump_stack+0x34/0x48 [ 3.744605] [<0000000040c33438>] check_preemption_disabled+0x178/0x1b0 [ 3.744605] [<0000000040c334f8>] __this_cpu_preempt_check+0x38/0x50 [ 3.744605] [<00000000401d632c>] flush_tlb_all+0x58/0x2e0 [ 3.744605] [<00000000401075c0>] 0x401075c0 [ 3.744605] [<000000004010b8fc>] 0x4010b8fc [ 3.744605] [<00000000401080fc>] 0x401080fc [ 3.744605] [<00000000401d5224>] do_one_initcall+0x128/0x378 [ 3.744605] [<0000000040102de8>] 0x40102de8 [ 3.744605] [<0000000040c33864>] kernel_init+0x60/0x3a8 [ 3.744605] [<00000000401d1020>] ret_from_kernel_thread+0x20/0x28 [ 3.744605] Fix this by moving the __inc_irq_stat() into the locked section. Signed-off-by: Sven Schnelle <[email protected]> Signed-off-by: Helge Deller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Hello,
Here's the partial compile log:
drivers/char/broadcom/vc_cma/vc_cma.c: In function 'vc_cma_init':
drivers/char/broadcom/vc_cma/vc_cma.c:1088:2: error: implicit declaration of function 'create_proc_entry' [-Werror=implicit-function-declaration]
drivers/char/broadcom/vc_cma/vc_cma.c:1088:20: error: assignment makes pointer from integer without a cast [-Werror]
drivers/char/broadcom/vc_cma/vc_cma.c:1095:19: error: dereferencing pointer to incomplete type
drivers/char/broadcom/vc_cma/vc_cma.c: In function 'vc_cma_exit':
drivers/char/broadcom/vc_cma/vc_cma.c:1134:38: error: dereferencing pointer to incomplete type
cc1: all warnings being treated as errors
distcc[13074] ERROR: compile drivers/char/broadcom/vc_cma/vc_cma.c on localhost failed
make[4]: *** [drivers/char/broadcom/vc_cma/vc_cma.o] Error 1
make[3]: *** [drivers/char/broadcom/vc_cma] Error 2
make[2]: *** [drivers/char/broadcom] Error 2
make[1]: *** [drivers/char] Error 2
make: *** [drivers] Error 2
Full log can be found here: http://archlinuxarm.org:81/builder/in-log/linux-raspberrypi-latest-3.10.0-2-armv6.log.html.gz
Kernel config is here: https://github.com/archlinuxarm/PKGBUILDs/blob/master/core/linux-raspberrypi-latest/config
The text was updated successfully, but these errors were encountered: