Packetdrill: dss: failing with new DATA_FIN patches #69
Assignees
Labels
Comments
|
I do think this is a case where the tests need to be updated, since the kernel now tries to send and ack DATA_FIN before TCP_FIN (even if there's only a single subflow). |
|
I was about to write:
question: is it correct to increase the DACK number to account for the reception of DATAFIN? and triggers the transission of the same outboud FIN+DATAFIN packet on the server under test. Maybe it's because it is legitimate for the packetdrill packet to acknowledge more bytes after the DATAFIN (so, 3002 is good because it's bigger than 3001) ? thanks, davide |
|
(just not to leave unanswered questions: I think @dcaratti 's question was answered on IRC: yes, a DATA_FIN needs to be ACK like a FIN ; like a FIN, it takes one octet: https://www.rfc-editor.org/rfc/rfc8684.html#section-3.3.3-4 ) |
dcaratti
added a commit
to dcaratti/packetdrill
that referenced
this issue
Aug 17, 2020
on recent kernels (5.9-rc1+), a call to close() causes the transmission of a regular ack having the DATA FIN bit set. This bit is acknowledged by the peer and then subflows are closed with TCP FIN: adjust tests in the 'dss' and 'add_addr' folders accordingly. Closes: multipath-tcp/mptcp_net-next#69 Signed-off-by: Davide Caratti <[email protected]>
dcaratti
added a commit
to dcaratti/packetdrill
that referenced
this issue
Aug 17, 2020
on recent kernels (5.9-rc1+), a call to close() causes the transmission of a regular ack having the DATA FIN bit set. This bit is acknowledged by the peer and then subflows are closed with TCP FIN: adjust tests in the 'dss' and 'add_addr' folders accordingly. Closes: multipath-tcp/mptcp_net-next#69 Signed-off-by: Davide Caratti <[email protected]>
dcaratti
added a commit
to dcaratti/packetdrill
that referenced
this issue
Sep 1, 2020
on recent kernels (5.9-rc1+), a call to close() causes the transmission of a regular TCP ACK having the DATA FIN bit set. Then, the kernel under test immediately sends a TCP FIN with DACK and DATA FIN: adjust tests in the 'dss' and 'add_addr' folders accordingly. Closes: multipath-tcp/mptcp_net-next#69 Signed-off-by: Davide Caratti <[email protected]>
jenkins-tessares
pushed a commit
that referenced
this issue
Sep 12, 2020
The idx in __ath10k_htt_rx_ring_fill_n function lives in
consistent dma region writable by the device. Malfunctional
or malicious device could manipulate such idx to have a OOB
write. Either by
htt->rx_ring.netbufs_ring[idx] = skb;
or by
ath10k_htt_set_paddrs_ring(htt, paddr, idx);
The idx can also be negative as it's signed, giving a large
memory space to write to.
It's possibly exploitable by corruptting a legit pointer with
a skb pointer. And then fill skb with payload as rougue object.
Part of the log here. Sometimes it appears as UAF when writing
to a freed memory by chance.
[ 15.594376] BUG: unable to handle page fault for address: ffff887f5c1804f0
[ 15.595483] #PF: supervisor write access in kernel mode
[ 15.596250] #PF: error_code(0x0002) - not-present page
[ 15.597013] PGD 0 P4D 0
[ 15.597395] Oops: 0002 [#1] SMP KASAN PTI
[ 15.597967] CPU: 0 PID: 82 Comm: kworker/u2:2 Not tainted 5.6.0 #69
[ 15.598843] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
[ 15.600438] Workqueue: ath10k_wq ath10k_core_register_work [ath10k_core]
[ 15.601389] RIP: 0010:__ath10k_htt_rx_ring_fill_n
(linux/drivers/net/wireless/ath/ath10k/htt_rx.c:173) ath10k_core
Signed-off-by: Zekun Shen <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
jenkins-tessares
pushed a commit
that referenced
this issue
Feb 12, 2021
The current implementation of L2CAP options negotiation will continue
the negotiation when a device responds with L2CAP_CONF_UNACCEPT ("unaccepted
options"), but not when the device replies with L2CAP_CONF_UNKNOWN ("unknown
options").
Trying to continue the negotiation without ERTM support will allow
Bluetooth-capable XBox One controllers (notably models 1708 and 1797)
to connect.
btmon before patch:
> ACL Data RX: Handle 256 flags 0x02 dlen 16 #64 [hci0] 59.182702
L2CAP: Connection Response (0x03) ident 2 len 8
Destination CID: 64
Source CID: 64
Result: Connection successful (0x0000)
Status: No further information available (0x0000)
< ACL Data TX: Handle 256 flags 0x00 dlen 23 #65 [hci0] 59.182744
L2CAP: Configure Request (0x04) ident 3 len 15
Destination CID: 64
Flags: 0x0000
Option: Retransmission and Flow Control (0x04) [mandatory]
Mode: Basic (0x00)
TX window size: 0
Max transmit: 0
Retransmission timeout: 0
Monitor timeout: 0
Maximum PDU size: 0
> ACL Data RX: Handle 256 flags 0x02 dlen 16 #66 [hci0] 59.183948
L2CAP: Configure Request (0x04) ident 1 len 8
Destination CID: 64
Flags: 0x0000
Option: Maximum Transmission Unit (0x01) [mandatory]
MTU: 1480
< ACL Data TX: Handle 256 flags 0x00 dlen 18 #67 [hci0] 59.183994
L2CAP: Configure Response (0x05) ident 1 len 10
Source CID: 64
Flags: 0x0000
Result: Success (0x0000)
Option: Maximum Transmission Unit (0x01) [mandatory]
MTU: 1480
> ACL Data RX: Handle 256 flags 0x02 dlen 15 #69 [hci0] 59.187676
L2CAP: Configure Response (0x05) ident 3 len 7
Source CID: 64
Flags: 0x0000
Result: Failure - unknown options (0x0003)
04 .
< ACL Data TX: Handle 256 flags 0x00 dlen 12 #70 [hci0] 59.187722
L2CAP: Disconnection Request (0x06) ident 4 len 4
Destination CID: 64
Source CID: 64
> ACL Data RX: Handle 256 flags 0x02 dlen 12 #73 [hci0] 59.192714
L2CAP: Disconnection Response (0x07) ident 4 len 4
Destination CID: 64
Source CID: 64
btmon after patch:
> ACL Data RX: Handle 256 flags 0x02 dlen 16 #248 [hci0] 103.502970
L2CAP: Connection Response (0x03) ident 5 len 8
Destination CID: 65
Source CID: 65
Result: Connection pending (0x0001)
Status: No further information available (0x0000)
> ACL Data RX: Handle 256 flags 0x02 dlen 16 #249 [hci0] 103.504184
L2CAP: Connection Response (0x03) ident 5 len 8
Destination CID: 65
Source CID: 65
Result: Connection successful (0x0000)
Status: No further information available (0x0000)
< ACL Data TX: Handle 256 flags 0x00 dlen 23 #250 [hci0] 103.504398
L2CAP: Configure Request (0x04) ident 6 len 15
Destination CID: 65
Flags: 0x0000
Option: Retransmission and Flow Control (0x04) [mandatory]
Mode: Basic (0x00)
TX window size: 0
Max transmit: 0
Retransmission timeout: 0
Monitor timeout: 0
Maximum PDU size: 0
> ACL Data RX: Handle 256 flags 0x02 dlen 16 #251 [hci0] 103.505472
L2CAP: Configure Request (0x04) ident 3 len 8
Destination CID: 65
Flags: 0x0000
Option: Maximum Transmission Unit (0x01) [mandatory]
MTU: 1480
< ACL Data TX: Handle 256 flags 0x00 dlen 18 #252 [hci0] 103.505689
L2CAP: Configure Response (0x05) ident 3 len 10
Source CID: 65
Flags: 0x0000
Result: Success (0x0000)
Option: Maximum Transmission Unit (0x01) [mandatory]
MTU: 1480
> ACL Data RX: Handle 256 flags 0x02 dlen 15 #254 [hci0] 103.509165
L2CAP: Configure Response (0x05) ident 6 len 7
Source CID: 65
Flags: 0x0000
Result: Failure - unknown options (0x0003)
04 .
< ACL Data TX: Handle 256 flags 0x00 dlen 12 #255 [hci0] 103.509426
L2CAP: Configure Request (0x04) ident 7 len 4
Destination CID: 65
Flags: 0x0000
< ACL Data TX: Handle 256 flags 0x00 dlen 12 #257 [hci0] 103.511870
L2CAP: Connection Request (0x02) ident 8 len 4
PSM: 1 (0x0001)
Source CID: 66
> ACL Data RX: Handle 256 flags 0x02 dlen 14 #259 [hci0] 103.514121
L2CAP: Configure Response (0x05) ident 7 len 6
Source CID: 65
Flags: 0x0000
Result: Success (0x0000)
Signed-off-by: Florian Dollinger <[email protected]>
Co-developed-by: Florian Dollinger <[email protected]>
Reviewed-by: Luiz Augusto Von Dentz <[email protected]>
Signed-off-by: Marcel Holtmann <[email protected]>
matttbe
pushed a commit
that referenced
this issue
Aug 2, 2021
Avoids the following WARN: [ 3.009556] ------------[ cut here ]------------ [ 3.014306] WARNING: CPU: 7 PID: 109 at drivers/gpu/drm/drm_dp_helper.c:1796 drm_dp_aux_register+0xa4/0xac [ 3.024209] Modules linked in: [ 3.027351] CPU: 7 PID: 109 Comm: kworker/7:8 Not tainted 5.10.47 #69 [ 3.033958] Hardware name: Google Lazor (rev1 - 2) (DT) [ 3.039323] Workqueue: events deferred_probe_work_func [ 3.044596] pstate: 60c00009 (nZCv daif +PAN +UAO -TCO BTYPE=--) [ 3.050761] pc : drm_dp_aux_register+0xa4/0xac [ 3.055329] lr : dp_aux_register+0x40/0x88 [ 3.059538] sp : ffffffc010ad3920 [ 3.062948] x29: ffffffc010ad3920 x28: ffffffa64196ac70 [ 3.067239] mmc1: Command Queue Engine enabled [ 3.068406] x27: ffffffa64196ac68 x26: 0000000000000001 [ 3.068407] x25: 0000000000000002 x24: 0000000000000060 [ 3.068409] x23: ffffffa642ab3400 x22: ffffffe126c10e5b [ 3.068410] x21: ffffffa641dc3188 x20: ffffffa641963c10 [ 3.068412] x19: ffffffa642aba910 x18: 00000000ffff0a00 [ 3.068414] x17: 000000476f8e002a x16: 00000000000000b8 [ 3.073008] mmc1: new HS400 Enhanced strobe MMC card at address 0001 [ 3.078448] x15: ffffffffffffffff x14: ffffffffffffffff [ 3.078450] x13: 0000000000000030 x12: 0000000000000030 [ 3.078452] x11: 0101010101010101 x10: ffffffe12647a914 [ 3.078453] x9 : ffffffe12647a8cc x8 : 0000000000000000 [ 3.084452] mmcblk1: mmc1:0001 DA4032 29.1 GiB [ 3.089372] [ 3.089372] x7 : 6c6064717372fefe x6 : ffffffa642b11494 [ 3.089374] x5 : 0000000000000000 x4 : 6d006c657869ffff [ 3.089375] x3 : 000000006c657869 x2 : 000000000000000c [ 3.089376] x1 : ffffffe126c3ae3c x0 : ffffffa642aba910 [ 3.089381] Call trace: [ 3.094931] mmcblk1boot0: mmc1:0001 DA4032 partition 1 4.00 MiB [ 3.100291] drm_dp_aux_register+0xa4/0xac [ 3.100292] dp_aux_register+0x40/0x88 [ 3.100294] dp_display_bind+0x64/0xcc [ 3.100295] component_bind_all+0xdc/0x210 [ 3.100298] msm_drm_bind+0x1e8/0x5d4 [ 3.100301] try_to_bring_up_master+0x168/0x1b0 [ 3.105861] mmcblk1boot1: mmc1:0001 DA4032 partition 2 4.00 MiB [ 3.112282] __component_add+0xa0/0x158 [ 3.112283] component_add+0x1c/0x28 [ 3.112284] dp_display_probe+0x33c/0x380 [ 3.112286] platform_drv_probe+0x9c/0xbc [ 3.112287] really_probe+0x140/0x35c [ 3.112289] driver_probe_device+0x84/0xc0 [ 3.112292] __device_attach_driver+0x94/0xb0 [ 3.117967] mmcblk1rpmb: mmc1:0001 DA4032 partition 3 16.0 MiB, chardev (239:0) [ 3.123201] bus_for_each_drv+0x8c/0xd8 [ 3.123202] __device_attach+0xc4/0x150 [ 3.123204] device_initial_probe+0x1c/0x28 [ 3.123205] bus_probe_device+0x3c/0x9c [ 3.123206] deferred_probe_work_func+0x90/0xcc [ 3.123211] process_one_work+0x218/0x3ec [ 3.131976] mmcblk1: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 3.134123] worker_thread+0x288/0x3e8 [ 3.134124] kthread+0x148/0x1b0 [ 3.134127] ret_from_fork+0x10/0x30 [ 3.134128] ---[ end trace cfb9fce3f70f824d ]--- Signed-off-by: Sean Paul <[email protected]> Reviewed-by: Abhinav Kumar <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Clark <[email protected]>
jenkins-tessares
pushed a commit
that referenced
this issue
Sep 1, 2021
lockdep complains that in omap-aes, the list_lock is taken both with
softirqs enabled at probe time, and also in softirq context, which
could lead to a deadlock:
================================
WARNING: inconsistent lock state
5.14.0-rc1-00035-gc836005b01c5-dirty #69 Not tainted
--------------------------------
inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
ksoftirqd/0/7 [HC0[0]:SC1[3]:HE1:SE0] takes:
bf00e014 (list_lock){+.?.}-{2:2}, at: omap_aes_find_dev+0x18/0x54 [omap_aes_driver]
{SOFTIRQ-ON-W} state was registered at:
_raw_spin_lock+0x40/0x50
omap_aes_probe+0x1d4/0x664 [omap_aes_driver]
platform_probe+0x58/0xb8
really_probe+0xbc/0x314
__driver_probe_device+0x80/0xe4
driver_probe_device+0x30/0xc8
__driver_attach+0x70/0xf4
bus_for_each_dev+0x70/0xb4
bus_add_driver+0xf0/0x1d4
driver_register+0x74/0x108
do_one_initcall+0x84/0x2e4
do_init_module+0x5c/0x240
load_module+0x221c/0x2584
sys_finit_module+0xb0/0xec
ret_fast_syscall+0x0/0x2c
0xbed90b30
irq event stamp: 111800
hardirqs last enabled at (111800): [<c02a21e4>] __kmalloc+0x484/0x5ec
hardirqs last disabled at (111799): [<c02a21f0>] __kmalloc+0x490/0x5ec
softirqs last enabled at (111776): [<c01015f0>] __do_softirq+0x2b8/0x4d0
softirqs last disabled at (111781): [<c0135948>] run_ksoftirqd+0x34/0x50
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(list_lock);
<Interrupt>
lock(list_lock);
*** DEADLOCK ***
2 locks held by ksoftirqd/0/7:
#0: c0f5e8c8 (rcu_read_lock){....}-{1:2}, at: netif_receive_skb+0x6c/0x260
#1: c0f5e8c8 (rcu_read_lock){....}-{1:2}, at: ip_local_deliver_finish+0x2c/0xdc
stack backtrace:
CPU: 0 PID: 7 Comm: ksoftirqd/0 Not tainted 5.14.0-rc1-00035-gc836005b01c5-dirty #69
Hardware name: Generic AM43 (Flattened Device Tree)
[<c010e6e0>] (unwind_backtrace) from [<c010b9d0>] (show_stack+0x10/0x14)
[<c010b9d0>] (show_stack) from [<c017c640>] (mark_lock.part.17+0x5bc/0xd04)
[<c017c640>] (mark_lock.part.17) from [<c017d9e4>] (__lock_acquire+0x960/0x2fa4)
[<c017d9e4>] (__lock_acquire) from [<c0180980>] (lock_acquire+0x10c/0x358)
[<c0180980>] (lock_acquire) from [<c093d324>] (_raw_spin_lock_bh+0x44/0x58)
[<c093d324>] (_raw_spin_lock_bh) from [<bf00b258>] (omap_aes_find_dev+0x18/0x54 [omap_aes_driver])
[<bf00b258>] (omap_aes_find_dev [omap_aes_driver]) from [<bf00b328>] (omap_aes_crypt+0x94/0xd4 [omap_aes_driver])
[<bf00b328>] (omap_aes_crypt [omap_aes_driver]) from [<c08ac6d0>] (esp_input+0x1b0/0x2c8)
[<c08ac6d0>] (esp_input) from [<c08c9e90>] (xfrm_input+0x410/0x1290)
[<c08c9e90>] (xfrm_input) from [<c08b6374>] (xfrm4_esp_rcv+0x54/0x11c)
[<c08b6374>] (xfrm4_esp_rcv) from [<c0838840>] (ip_protocol_deliver_rcu+0x48/0x3bc)
[<c0838840>] (ip_protocol_deliver_rcu) from [<c0838c50>] (ip_local_deliver_finish+0x9c/0xdc)
[<c0838c50>] (ip_local_deliver_finish) from [<c0838dd8>] (ip_local_deliver+0x148/0x1b0)
[<c0838dd8>] (ip_local_deliver) from [<c0838f5c>] (ip_rcv+0x11c/0x180)
[<c0838f5c>] (ip_rcv) from [<c077e3a4>] (__netif_receive_skb_one_core+0x54/0x74)
[<c077e3a4>] (__netif_receive_skb_one_core) from [<c077e588>] (netif_receive_skb+0xa8/0x260)
[<c077e588>] (netif_receive_skb) from [<c068d6d4>] (cpsw_rx_handler+0x224/0x2fc)
[<c068d6d4>] (cpsw_rx_handler) from [<c0688ccc>] (__cpdma_chan_process+0xf4/0x188)
[<c0688ccc>] (__cpdma_chan_process) from [<c068a0c0>] (cpdma_chan_process+0x3c/0x5c)
[<c068a0c0>] (cpdma_chan_process) from [<c0690e14>] (cpsw_rx_mq_poll+0x44/0x98)
[<c0690e14>] (cpsw_rx_mq_poll) from [<c0780810>] (__napi_poll+0x28/0x268)
[<c0780810>] (__napi_poll) from [<c0780c64>] (net_rx_action+0xcc/0x204)
[<c0780c64>] (net_rx_action) from [<c0101478>] (__do_softirq+0x140/0x4d0)
[<c0101478>] (__do_softirq) from [<c0135948>] (run_ksoftirqd+0x34/0x50)
[<c0135948>] (run_ksoftirqd) from [<c01583b8>] (smpboot_thread_fn+0xf4/0x1d8)
[<c01583b8>] (smpboot_thread_fn) from [<c01546dc>] (kthread+0x14c/0x174)
[<c01546dc>] (kthread) from [<c010013c>] (ret_from_fork+0x14/0x38)
...
The omap-des and omap-sham drivers appear to have a similar issue.
Fix this by using spin_{,un}lock_bh() around device list access in all
the probe and remove functions.
Signed-off-by: Ben Hutchings <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
jenkins-tessares
pushed a commit
that referenced
this issue
Sep 5, 2022
…te() When peer delete failed in a disconnect operation, use-after-free detected by KFENCE in below log. It is because for each vdev_id and address, it has only one struct ath10k_peer, it is allocated in ath10k_peer_map_event(). When connected to an AP, it has more than one HTT_T2H_MSG_TYPE_PEER_MAP reported from firmware, then the array peer_map of struct ath10k will be set muti-elements to the same ath10k_peer in ath10k_peer_map_event(). When peer delete failed in ath10k_sta_state(), the ath10k_peer will be free for the 1st peer id in array peer_map of struct ath10k, and then use-after-free happened for the 2nd peer id because they map to the same ath10k_peer. And clean up all peers in array peer_map for the ath10k_peer, then user-after-free disappeared peer map event log: [ 306.911021] wlan0: authenticate with b0:2a:43:e6:75:0e [ 306.957187] ath10k_pci 0000:01:00.0: mac vdev 0 peer create b0:2a:43:e6:75:0e (new sta) sta 1 / 32 peer 1 / 33 [ 306.957395] ath10k_pci 0000:01:00.0: htt peer map vdev 0 peer b0:2a:43:e6:75:0e id 246 [ 306.957404] ath10k_pci 0000:01:00.0: htt peer map vdev 0 peer b0:2a:43:e6:75:0e id 198 [ 306.986924] ath10k_pci 0000:01:00.0: htt peer map vdev 0 peer b0:2a:43:e6:75:0e id 166 peer unmap event log: [ 435.715691] wlan0: deauthenticating from b0:2a:43:e6:75:0e by local choice (Reason: 3=DEAUTH_LEAVING) [ 435.716802] ath10k_pci 0000:01:00.0: mac vdev 0 peer delete b0:2a:43:e6:75:0e sta ffff990e0e9c2b50 (sta gone) [ 435.717177] ath10k_pci 0000:01:00.0: htt peer unmap vdev 0 peer b0:2a:43:e6:75:0e id 246 [ 435.717186] ath10k_pci 0000:01:00.0: htt peer unmap vdev 0 peer b0:2a:43:e6:75:0e id 198 [ 435.717193] ath10k_pci 0000:01:00.0: htt peer unmap vdev 0 peer b0:2a:43:e6:75:0e id 166 use-after-free log: [21705.888627] wlan0: deauthenticating from d0:76:8f:82:be:75 by local choice (Reason: 3=DEAUTH_LEAVING) [21713.799910] ath10k_pci 0000:01:00.0: failed to delete peer d0:76:8f:82:be:75 for vdev 0: -110 [21713.799925] ath10k_pci 0000:01:00.0: found sta peer d0:76:8f:82:be:75 (ptr 0000000000000000 id 102) entry on vdev 0 after it was supposedly removed [21713.799968] ================================================================== [21713.799991] BUG: KFENCE: use-after-free read in ath10k_sta_state+0x265/0xb8a [ath10k_core] [21713.799991] [21713.799997] Use-after-free read at 0x00000000abe1c75e (in kfence-#69): [21713.800010] ath10k_sta_state+0x265/0xb8a [ath10k_core] [21713.800041] drv_sta_state+0x115/0x677 [mac80211] [21713.800059] __sta_info_destroy_part2+0xb1/0x133 [mac80211] [21713.800076] __sta_info_flush+0x11d/0x162 [mac80211] [21713.800093] ieee80211_set_disassoc+0x12d/0x2f4 [mac80211] [21713.800110] ieee80211_mgd_deauth+0x26c/0x29b [mac80211] [21713.800137] cfg80211_mlme_deauth+0x13f/0x1bb [cfg80211] [21713.800153] nl80211_deauthenticate+0xf8/0x121 [cfg80211] [21713.800161] genl_rcv_msg+0x38e/0x3be [21713.800166] netlink_rcv_skb+0x89/0xf7 [21713.800171] genl_rcv+0x28/0x36 [21713.800176] netlink_unicast+0x179/0x24b [21713.800181] netlink_sendmsg+0x3a0/0x40e [21713.800187] sock_sendmsg+0x72/0x76 [21713.800192] ____sys_sendmsg+0x16d/0x1e3 [21713.800196] ___sys_sendmsg+0x95/0xd1 [21713.800200] __sys_sendmsg+0x85/0xbf [21713.800205] do_syscall_64+0x43/0x55 [21713.800210] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [21713.800213] [21713.800219] kfence-#69: 0x000000009149b0d5-0x000000004c0697fb, size=1064, cache=kmalloc-2k [21713.800219] [21713.800224] allocated by task 13 on cpu 0 at 21705.501373s: [21713.800241] ath10k_peer_map_event+0x7e/0x154 [ath10k_core] [21713.800254] ath10k_htt_t2h_msg_handler+0x586/0x1039 [ath10k_core] [21713.800265] ath10k_htt_htc_t2h_msg_handler+0x12/0x28 [ath10k_core] [21713.800277] ath10k_htc_rx_completion_handler+0x14c/0x1b5 [ath10k_core] [21713.800283] ath10k_pci_process_rx_cb+0x195/0x1df [ath10k_pci] [21713.800294] ath10k_ce_per_engine_service+0x55/0x74 [ath10k_core] [21713.800305] ath10k_ce_per_engine_service_any+0x76/0x84 [ath10k_core] [21713.800310] ath10k_pci_napi_poll+0x49/0x144 [ath10k_pci] [21713.800316] net_rx_action+0xdc/0x361 [21713.800320] __do_softirq+0x163/0x29a [21713.800325] asm_call_irq_on_stack+0x12/0x20 [21713.800331] do_softirq_own_stack+0x3c/0x48 [21713.800337] __irq_exit_rcu+0x9b/0x9d [21713.800342] common_interrupt+0xc9/0x14d [21713.800346] asm_common_interrupt+0x1e/0x40 [21713.800351] ksoftirqd_should_run+0x5/0x16 [21713.800357] smpboot_thread_fn+0x148/0x211 [21713.800362] kthread+0x150/0x15f [21713.800367] ret_from_fork+0x22/0x30 [21713.800370] [21713.800374] freed by task 708 on cpu 1 at 21713.799953s: [21713.800498] ath10k_sta_state+0x2c6/0xb8a [ath10k_core] [21713.800515] drv_sta_state+0x115/0x677 [mac80211] [21713.800532] __sta_info_destroy_part2+0xb1/0x133 [mac80211] [21713.800548] __sta_info_flush+0x11d/0x162 [mac80211] [21713.800565] ieee80211_set_disassoc+0x12d/0x2f4 [mac80211] [21713.800581] ieee80211_mgd_deauth+0x26c/0x29b [mac80211] [21713.800598] cfg80211_mlme_deauth+0x13f/0x1bb [cfg80211] [21713.800614] nl80211_deauthenticate+0xf8/0x121 [cfg80211] [21713.800619] genl_rcv_msg+0x38e/0x3be [21713.800623] netlink_rcv_skb+0x89/0xf7 [21713.800628] genl_rcv+0x28/0x36 [21713.800632] netlink_unicast+0x179/0x24b [21713.800637] netlink_sendmsg+0x3a0/0x40e [21713.800642] sock_sendmsg+0x72/0x76 [21713.800646] ____sys_sendmsg+0x16d/0x1e3 [21713.800651] ___sys_sendmsg+0x95/0xd1 [21713.800655] __sys_sendmsg+0x85/0xbf [21713.800659] do_syscall_64+0x43/0x55 [21713.800663] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Tested-on: QCA6174 hw3.2 PCI WLAN.RM.4.4.1-00288-QCARMSWPZ-1 Fixes: d0eeafa ("ath10k: Clean up peer when sta goes away.") Signed-off-by: Wen Gong <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
jenkins-tessares
pushed a commit
that referenced
this issue
Jan 29, 2023
Commit fb541ca ("md: remove lock_bdev / unlock_bdev") removes wrappers for blkdev_get/blkdev_put. However, the uninitialized local static variable of pointer type 'claim_rdev' in md_import_device() is NULL, which leads to the following warning call trace: WARNING: CPU: 22 PID: 1037 at block/bdev.c:577 bd_prepare_to_claim+0x131/0x150 CPU: 22 PID: 1037 Comm: mdadm Not tainted 6.2.0-rc3+ #69 .. RIP: 0010:bd_prepare_to_claim+0x131/0x150 .. Call Trace: <TASK> ? _raw_spin_unlock+0x15/0x30 ? iput+0x6a/0x220 blkdev_get_by_dev.part.0+0x4b/0x300 md_import_device+0x126/0x1d0 new_dev_store+0x184/0x240 md_attr_store+0x80/0xf0 kernfs_fop_write_iter+0x128/0x1c0 vfs_write+0x2be/0x3c0 ksys_write+0x5f/0xe0 do_syscall_64+0x38/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc It turns out the md device cannot be used: md: could not open device unknown-block(259,0). md: md127 stopped. Fix the issue by declaring the local static variable of struct type and passing the pointer of the variable to blkdev_get_by_dev(). Fixes: fb541ca ("md: remove lock_bdev / unlock_bdev") Cc: Christoph Hellwig <[email protected]> Signed-off-by: Adrian Huang <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Signed-off-by: Song Liu <[email protected]>
matttbe
pushed a commit
that referenced
this issue
Mar 13, 2024
Commit 3fcb9d1 ("io_uring/sqpoll: statistics of the true utilization of sq threads"), currently in Jens for-next branch, peeks at io_sq_data->thread to report utilization statistics. But, If io_uring_show_fdinfo races with sqpoll terminating, even though we hold the ctx lock, sqd->thread might be NULL and we hit the Oops below. Note that we could technically just protect the getrusage() call and the sq total/work time calculations. But showing some sq information (pid/cpu) and not other information (utilization) is more confusing than not reporting anything, IMO. So let's hide it all if we happen to race with a dying sqpoll. This can be triggered consistently in my vm setup running sqpoll-cancel-hang.t in a loop. BUG: kernel NULL pointer dereference, address: 00000000000007b0 PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 0 PID: 16587 Comm: systemd-coredum Not tainted 6.8.0-rc3-g3fcb9d17206e-dirty #69 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 2/2/2022 RIP: 0010:getrusage+0x21/0x3e0 Code: 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 55 48 89 d1 48 89 e5 41 57 41 56 41 55 41 54 49 89 fe 41 52 53 48 89 d3 48 83 ec 30 <4c> 8b a7 b0 07 00 00 48 8d 7a 08 65 48 8b 04 25 28 00 00 00 48 89 RSP: 0018:ffffa166c671bb80 EFLAGS: 00010282 RAX: 00000000000040ca RBX: ffffa166c671bc60 RCX: ffffa166c671bc60 RDX: ffffa166c671bc60 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffffa166c671bbe0 R08: ffff9448cc3930c0 R09: 0000000000000000 R10: ffffa166c671bd50 R11: ffffffff9ee89260 R12: 0000000000000000 R13: ffff9448ce099480 R14: 0000000000000000 R15: ffff9448cff5b000 FS: 00007f786e225900(0000) GS:ffff94493bc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000007b0 CR3: 000000010d39c000 CR4: 0000000000750ef0 PKRU: 55555554 Call Trace: <TASK> ? __die_body+0x1a/0x60 ? page_fault_oops+0x154/0x440 ? srso_alias_return_thunk+0x5/0xfbef5 ? do_user_addr_fault+0x174/0x7c0 ? srso_alias_return_thunk+0x5/0xfbef5 ? exc_page_fault+0x63/0x140 ? asm_exc_page_fault+0x22/0x30 ? getrusage+0x21/0x3e0 ? seq_printf+0x4e/0x70 io_uring_show_fdinfo+0x9db/0xa10 ? srso_alias_return_thunk+0x5/0xfbef5 ? vsnprintf+0x101/0x4d0 ? srso_alias_return_thunk+0x5/0xfbef5 ? seq_vprintf+0x34/0x50 ? srso_alias_return_thunk+0x5/0xfbef5 ? seq_printf+0x4e/0x70 ? seq_show+0x16b/0x1d0 ? __pfx_io_uring_show_fdinfo+0x10/0x10 seq_show+0x16b/0x1d0 seq_read_iter+0xd7/0x440 seq_read+0x102/0x140 vfs_read+0xae/0x320 ? srso_alias_return_thunk+0x5/0xfbef5 ? __do_sys_newfstat+0x35/0x60 ksys_read+0xa5/0xe0 do_syscall_64+0x50/0x110 entry_SYSCALL_64_after_hwframe+0x6e/0x76 RIP: 0033:0x7f786ec1db4d Code: e8 46 e3 01 00 0f 1f 84 00 00 00 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 80 3d d9 ce 0e 00 00 74 17 31 c0 0f 05 <48> 3d 00 f0 ff ff 77 5b c3 66 2e 0f 1f 84 00 00 00 00 00 48 83 ec RSP: 002b:00007ffcb361a4b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 RAX: ffffffffffffffda RBX: 000055a4c8fe42f0 RCX: 00007f786ec1db4d RDX: 0000000000000400 RSI: 000055a4c8fe48a0 RDI: 0000000000000006 RBP: 00007f786ecfb0b0 R08: 00007f786ecfb2a8 R09: 0000000000000001 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f786ecfaf60 R13: 000055a4c8fe42f0 R14: 0000000000000000 R15: 00007ffcb361a628 </TASK> Modules linked in: CR2: 00000000000007b0 ---[ end trace 0000000000000000 ]--- RIP: 0010:getrusage+0x21/0x3e0 Code: 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 55 48 89 d1 48 89 e5 41 57 41 56 41 55 41 54 49 89 fe 41 52 53 48 89 d3 48 83 ec 30 <4c> 8b a7 b0 07 00 00 48 8d 7a 08 65 48 8b 04 25 28 00 00 00 48 89 RSP: 0018:ffffa166c671bb80 EFLAGS: 00010282 RAX: 00000000000040ca RBX: ffffa166c671bc60 RCX: ffffa166c671bc60 RDX: ffffa166c671bc60 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffffa166c671bbe0 R08: ffff9448cc3930c0 R09: 0000000000000000 R10: ffffa166c671bd50 R11: ffffffff9ee89260 R12: 0000000000000000 R13: ffff9448ce099480 R14: 0000000000000000 R15: ffff9448cff5b000 FS: 00007f786e225900(0000) GS:ffff94493bc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000007b0 CR3: 000000010d39c000 CR4: 0000000000750ef0 PKRU: 55555554 Kernel panic - not syncing: Fatal exception Kernel Offset: 0x1ce00000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) Fixes: 3fcb9d1 ("io_uring/sqpoll: statistics of the true utilization of sq threads") Signed-off-by: Gabriel Krisman Bertazi <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]>
matttbe
pushed a commit
that referenced
this issue
Jun 11, 2024
Alexei reported that send_signal test may fail with nested CONFIG_PARAVIRT configs. In this particular case, the base VM is AMD with 166 cpus, and I run selftests with regular qemu on top of that and indeed send_signal test failed. I also tried with an Intel box with 80 cpus and there is no issue. The main qemu command line includes: -enable-kvm -smp 16 -cpu host The failure log looks like: $ ./test_progs -t send_signal [ 48.501588] watchdog: BUG: soft lockup - CPU#9 stuck for 26s! [test_progs:2225] [ 48.503622] Modules linked in: bpf_testmod(O) [ 48.503622] CPU: 9 PID: 2225 Comm: test_progs Tainted: G O 6.9.0-08561-g2c1713a8f1c9-dirty #69 [ 48.507629] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014 [ 48.511635] RIP: 0010:handle_softirqs+0x71/0x290 [ 48.511635] Code: [...] 10 0a 00 00 00 31 c0 65 66 89 05 d5 f4 fa 7e fb bb ff ff ff ff <49> c7 c2 cb [ 48.518527] RSP: 0018:ffffc90000310fa0 EFLAGS: 00000246 [ 48.519579] RAX: 0000000000000000 RBX: 00000000ffffffff RCX: 00000000000006e0 [ 48.522526] RDX: 0000000000000006 RSI: ffff88810791ae80 RDI: 0000000000000000 [ 48.523587] RBP: ffffc90000fabc88 R08: 00000005a0af4f7f R09: 0000000000000000 [ 48.525525] R10: 0000000561d2f29c R11: 0000000000006534 R12: 0000000000000280 [ 48.528525] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 [ 48.528525] FS: 00007f2f2885cd00(0000) GS:ffff888237c40000(0000) knlGS:0000000000000000 [ 48.531600] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 48.535520] CR2: 00007f2f287059f0 CR3: 0000000106a28002 CR4: 00000000003706f0 [ 48.537538] Call Trace: [ 48.537538] <IRQ> [ 48.537538] ? watchdog_timer_fn+0x1cd/0x250 [ 48.539590] ? lockup_detector_update_enable+0x50/0x50 [ 48.539590] ? __hrtimer_run_queues+0xff/0x280 [ 48.542520] ? hrtimer_interrupt+0x103/0x230 [ 48.544524] ? __sysvec_apic_timer_interrupt+0x4f/0x140 [ 48.545522] ? sysvec_apic_timer_interrupt+0x3a/0x90 [ 48.547612] ? asm_sysvec_apic_timer_interrupt+0x1a/0x20 [ 48.547612] ? handle_softirqs+0x71/0x290 [ 48.547612] irq_exit_rcu+0x63/0x80 [ 48.551585] sysvec_apic_timer_interrupt+0x75/0x90 [ 48.552521] </IRQ> [ 48.553529] <TASK> [ 48.553529] asm_sysvec_apic_timer_interrupt+0x1a/0x20 [ 48.555609] RIP: 0010:finish_task_switch.isra.0+0x90/0x260 [ 48.556526] Code: [...] 9f 58 0a 00 00 48 85 db 0f 85 89 01 00 00 4c 89 ff e8 53 d9 bd 00 fb 66 90 <4d> 85 ed 74 [ 48.562524] RSP: 0018:ffffc90000fabd38 EFLAGS: 00000282 [ 48.563589] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffff83385620 [ 48.563589] RDX: ffff888237c73ae4 RSI: 0000000000000000 RDI: ffff888237c6fd00 [ 48.568521] RBP: ffffc90000fabd68 R08: 0000000000000000 R09: 0000000000000000 [ 48.569528] R10: 0000000000000001 R11: 0000000000000000 R12: ffff8881009d0000 [ 48.573525] R13: ffff8881024e5400 R14: ffff88810791ae80 R15: ffff888237c6fd00 [ 48.575614] ? finish_task_switch.isra.0+0x8d/0x260 [ 48.576523] __schedule+0x364/0xac0 [ 48.577535] schedule+0x2e/0x110 [ 48.578555] pipe_read+0x301/0x400 [ 48.579589] ? destroy_sched_domains_rcu+0x30/0x30 [ 48.579589] vfs_read+0x2b3/0x2f0 [ 48.579589] ksys_read+0x8b/0xc0 [ 48.583590] do_syscall_64+0x3d/0xc0 [ 48.583590] entry_SYSCALL_64_after_hwframe+0x4b/0x53 [ 48.586525] RIP: 0033:0x7f2f28703fa1 [ 48.587592] Code: [...] 00 00 00 0f 1f 44 00 00 f3 0f 1e fa 80 3d c5 23 14 00 00 74 13 31 c0 0f 05 <48> 3d 00 f0 [ 48.593534] RSP: 002b:00007ffd90f8cf88 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 [ 48.595589] RAX: ffffffffffffffda RBX: 00007ffd90f8d5e8 RCX: 00007f2f28703fa1 [ 48.595589] RDX: 0000000000000001 RSI: 00007ffd90f8cfb0 RDI: 0000000000000006 [ 48.599592] RBP: 00007ffd90f8d2f0 R08: 0000000000000064 R09: 0000000000000000 [ 48.602527] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 [ 48.603589] R13: 00007ffd90f8d608 R14: 00007f2f288d8000 R15: 0000000000f6bdb0 [ 48.605527] </TASK> In the test, two processes are communicating through pipe. Further debugging with strace found that the above splat is triggered as read() syscall could not receive the data even if the corresponding write() syscall in another process successfully wrote data into the pipe. The failed subtest is "send_signal_perf". The corresponding perf event has sample_period 1 and config PERF_COUNT_SW_CPU_CLOCK. sample_period 1 means every overflow event will trigger a call to the BPF program. So I suspect this may overwhelm the system. So I increased the sample_period to 100,000 and the test passed. The sample_period 10,000 still has the test failed. In other parts of selftest, e.g., [1], sample_freq is used instead. So I decided to use sample_freq = 1,000 since the test can pass as well. [1] https://lore.kernel.org/bpf/[email protected]/ Reported-by: Alexei Starovoitov <[email protected]> Signed-off-by: Yonghong Song <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
matttbe
pushed a commit
that referenced
this issue
Nov 8, 2024
The flexspi on imx8ulp only has 16 LUTs, and imx8mm flexspi has 32 LUTs, so correct the compatible string here, otherwise will meet below error: [ 1.119072] ------------[ cut here ]------------ [ 1.123926] WARNING: CPU: 0 PID: 1 at drivers/spi/spi-nxp-fspi.c:855 nxp_fspi_exec_op+0xb04/0xb64 [ 1.133239] Modules linked in: [ 1.136448] CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.11.0-rc6-next-20240902-00001-g131bf9439dd9 #69 [ 1.146821] Hardware name: NXP i.MX8ULP EVK (DT) [ 1.151647] pstate: 40000005 (nZcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 1.158931] pc : nxp_fspi_exec_op+0xb04/0xb64 [ 1.163496] lr : nxp_fspi_exec_op+0xa34/0xb64 [ 1.168060] sp : ffff80008002b2a0 [ 1.171526] x29: ffff80008002b2d0 x28: 0000000000000000 x27: 0000000000000000 [ 1.179002] x26: ffff2eb645542580 x25: ffff800080610014 x24: ffff800080610000 [ 1.186480] x23: ffff2eb645548080 x22: 0000000000000006 x21: ffff2eb6455425e0 [ 1.193956] x20: 0000000000000000 x19: ffff80008002b5e0 x18: ffffffffffffffff [ 1.201432] x17: ffff2eb644467508 x16: 0000000000000138 x15: 0000000000000002 [ 1.208907] x14: 0000000000000000 x13: ffff2eb6400d8080 x12: 00000000ffffff00 [ 1.216378] x11: 0000000000000000 x10: ffff2eb6400d8080 x9 : ffff2eb697adca80 [ 1.223850] x8 : ffff2eb697ad3cc0 x7 : 0000000100000000 x6 : 0000000000000001 [ 1.231324] x5 : 0000000000000000 x4 : 0000000000000000 x3 : 00000000000007a6 [ 1.238795] x2 : 0000000000000000 x1 : 00000000000001ce x0 : 00000000ffffff92 [ 1.246267] Call trace: [ 1.248824] nxp_fspi_exec_op+0xb04/0xb64 [ 1.253031] spi_mem_exec_op+0x3a0/0x430 [ 1.257139] spi_nor_read_id+0x80/0xcc [ 1.261065] spi_nor_scan+0x1ec/0xf10 [ 1.264901] spi_nor_probe+0x108/0x2fc [ 1.268828] spi_mem_probe+0x6c/0xbc [ 1.272574] spi_probe+0x84/0xe4 [ 1.275958] really_probe+0xbc/0x29c [ 1.279713] __driver_probe_device+0x78/0x12c [ 1.284277] driver_probe_device+0xd8/0x15c [ 1.288660] __device_attach_driver+0xb8/0x134 [ 1.293316] bus_for_each_drv+0x88/0xe8 [ 1.297337] __device_attach+0xa0/0x190 [ 1.301353] device_initial_probe+0x14/0x20 [ 1.305734] bus_probe_device+0xac/0xb0 [ 1.309752] device_add+0x5d0/0x790 [ 1.313408] __spi_add_device+0x134/0x204 [ 1.317606] of_register_spi_device+0x3b4/0x590 [ 1.322348] spi_register_controller+0x47c/0x754 [ 1.327181] devm_spi_register_controller+0x4c/0xa4 [ 1.332289] nxp_fspi_probe+0x1cc/0x2b0 [ 1.336307] platform_probe+0x68/0xc4 [ 1.340145] really_probe+0xbc/0x29c [ 1.343893] __driver_probe_device+0x78/0x12c [ 1.348457] driver_probe_device+0xd8/0x15c [ 1.352838] __driver_attach+0x90/0x19c [ 1.356857] bus_for_each_dev+0x7c/0xdc [ 1.360877] driver_attach+0x24/0x30 [ 1.364624] bus_add_driver+0xe4/0x208 [ 1.368552] driver_register+0x5c/0x124 [ 1.372573] __platform_driver_register+0x28/0x34 [ 1.377497] nxp_fspi_driver_init+0x1c/0x28 [ 1.381888] do_one_initcall+0x80/0x1c8 [ 1.385908] kernel_init_freeable+0x1c4/0x28c [ 1.390472] kernel_init+0x20/0x1d8 [ 1.394138] ret_from_fork+0x10/0x20 [ 1.397885] ---[ end trace 0000000000000000 ]--- [ 1.407908] ------------[ cut here ]------------ Fixes: ef89fd5 ("arm64: dts: imx8ulp: add flexspi node") Cc: [email protected] Signed-off-by: Haibo Chen <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Without debug kernel config:
With debug kernel config:
It is certainly normal to send the dedicated ACK before the FIN with the new version. But this needs to be verified and maybe packetdrill tests need to be adapted.
The text was updated successfully, but these errors were encountered: