Update helm chart to better match available values and add the ability to add annotations #423

krmichel · 2019-12-01T18:08:07Z

This fixes issue #422

Update templates to use existing info from the values file
- Base replica count of controller off of the value from the values file
- Use node selector info for the controller from the values file
- Use affinity info for the controller from from values file
- Use tolerations info for the controller from from values file
- Use image pull policy info for the controller from from values file
- Use resource info for the controller from from values file
Added configurable values
- Allow annotations to be specified on the controller
- Allow annotations to be specified on the node service
- Allow tolerations to be specified on the node service
Replace deprecated serviceAccount with serviceAccountName

I have used helm template --dry-run to compare output of the current chart against the updated chart. I also did some comparisons with the manifests in the base for the kustomize deployment with the chart files.

…y to add annotations

k8s-ci-robot · 2019-12-01T18:08:11Z

Thanks for your pull request. Before we can look at your pull request, you'll need to sign a Contributor License Agreement (CLA).

📝 Please follow instructions at https://git.k8s.io/community/CLA.md#the-contributor-license-agreement to sign the CLA.

It may take a couple minutes for the CLA signature to be fully registered; after that, please reply here with a new comment and we'll verify. Thanks.

If you've already signed a CLA, it's possible we don't have your GitHub username or you're using a different email address. Check your existing CLA data and verify that your email is set on your git commits.
If you signed the CLA as a corporation, please sign in with your organization's credentials at https://identity.linuxfoundation.org/projects/cncf to be authorized.
If you have done the above and are still having issues with the CLA being reported as unsigned, please log a ticket with the Linux Foundation Helpdesk: https://support.linuxfoundation.org/
Should you encounter any issues with the Linux Foundation Helpdesk, send a message to the backup e-mail support address at: [email protected]

Instructions for interacting with me using PR comments are available here. If you have questions or suggestions related to my behavior, please file an issue against the kubernetes/test-infra repository. I understand the commands that are listed here.

k8s-ci-robot · 2019-12-01T18:08:15Z

Welcome @krmichel!

It looks like this is your first PR to kubernetes-sigs/aws-ebs-csi-driver 🎉. Please refer to our pull request process documentation to help your PR have a smooth ride to approval.

You will be prompted by a bot to use commands during the review process. Do not be afraid to follow the prompts! It is okay to experiment. Here is the bot commands documentation.

You can also check if kubernetes-sigs/aws-ebs-csi-driver has its own contribution guidelines.

You may want to refer to our testing guide if you run into trouble with your tests not passing.

If you are having difficulty getting your pull request seen, please follow the recommended escalation practices. Also, for tips and tricks in the contribution process you may want to read the Kubernetes contributor cheat sheet. We want to make sure your contribution gets all the attention it needs!

Thank you, and welcome to Kubernetes. 😃

k8s-ci-robot · 2019-12-01T18:08:15Z

Hi @krmichel. Thanks for your PR.

I'm waiting for a kubernetes-sigs member to verify that this patch is reasonable to test. If it is, they should reply with /ok-to-test on its own line. Until that is done, I will not automatically test new commits in this PR, but the usual testing commands by org members will still work. Regular contributors should join the org to skip this step.

Once the patch is verified, the new status will be reflected by the ok-to-test label.

I understand the commands that are listed here.

Instructions for interacting with me using PR comments are available here. If you have questions or suggestions related to my behavior, please file an issue against the kubernetes/test-infra repository.

coveralls · 2019-12-01T18:12:25Z

Pull Request Test Coverage Report for Build 1012

0 of 0 changed or added relevant lines in 0 files are covered.
No unchanged relevant lines lost coverage.
Overall coverage remained the same at 71.421%

Totals
Change from base Build 1011:	0.0%
Covered Lines:	1277
Relevant Lines:	1788

💛 - Coveralls

krmichel · 2019-12-01T18:24:10Z

/check-cla

krmichel · 2019-12-01T18:25:10Z

/assign @bertinatto

bertinatto · 2019-12-02T08:20:43Z

/ok-to-test

bertinatto · 2019-12-02T08:22:58Z

Thanks, @krmichel!

/assign @leakingtapan
Assigning Cheng who is more familiar with Helm

leakingtapan

Thx for the change. I like the idea of breaking the manifest.yaml down into separate yamls.

Could you update this issue description about what are the changes (as bullet points) and how are the changes being tested?

aws-ebs-csi-driver/templates/deployment.yaml

krmichel · 2019-12-05T11:30:39Z

/retest

krmichel · 2019-12-05T14:01:52Z

@krmichel: The following test failed, say /retest to rerun them all:

Test name Commit Details Rerun command
pull-aws-ebs-csi-driver-e2e-single-az a6dd875 link /test pull-aws-ebs-csi-driver-e2e-single-az
Full PR test history. Your PR dashboard. Please help us cut down on flakes by linking to an open issue when you hit one in your PR.

This test has failed a couple of times but has passed once and appears to be unrelated to anything I have changed.

I have logged this issue

krmichel · 2019-12-05T14:03:56Z

/retest

aws-ebs-csi-driver/templates/serviceaccount.yaml

leakingtapan · 2020-02-26T17:41:35Z

@krmichel got a chance to address comment and rebase?

krmichel · 2020-02-26T19:24:51Z

@leakingtapan I will work on the rebase. I thought I had hit all the comments. Did I miss some?

krmichel · 2020-02-26T20:42:47Z

@leakingtapan I have dealt with the conflicts

krmichel · 2020-02-26T21:38:56Z

/retest

krmichel · 2020-02-29T21:12:49Z

@leakingtapan, @bertinatto, @tyrken: I think I have addressed all the comments and have rebased. Can I get some reviewers to look at this?

leakingtapan · 2020-02-29T23:48:45Z

it looks good to me. Thx for improving the chart!
/lgtm
/approve

k8s-ci-robot · 2020-02-29T23:48:54Z

[APPROVALNOTIFIER] This PR is APPROVED

This pull-request has been approved by: krmichel, leakingtapan

The full list of commands accepted by this bot can be found here.

The pull request process is described here

Needs approval from an approver in each of these files:

~~OWNERS~~ [leakingtapan]

Approvers can indicate their approval by writing /approve in a comment
Approvers can cancel approval by writing /approve cancel in a comment

leakingtapan · 2020-03-01T00:40:32Z

/retest

krmichel · 2020-03-01T01:14:55Z

/retest

tyrken · 2020-03-01T19:33:03Z

Thanks for all @krmichel @leakingtapan

@jieyu

@jieyu

@jieyu

@jieyu

* chore: update aws-ebs-csi-driver from 0.4.0 to 0.5.0 [Documentation](https://github.com/kubernetes-sigs/aws-ebs-csi-driver/blob/v0.5.0/docs/README.md) filename | sha512 hash --------- | ------------ [v0.5.0.zip](https://github.com/kubernetes-sigs/aws-ebs-csi-driver/archive/v0.5.0.zip) | `c53327e090352a7f79ee642dbf8c211733f4a2cb78968ec688a1eade55151e65f1f97cd228d22168317439f1db9f3d2f07dcaa2873f44732ad23aaf632cbef3a` [v0.5.0.tar.gz](https://github.com/kubernetes-sigs/aws-ebs-csi-driver/archive/v0.5.0.tar.gz) | `ec4963d34c601cdf718838d90b8aa6f36b16c9ac127743e73fbe76118a606d41aced116aaaab73370c17bcc536945d5ccd735bc5a4a00f523025c8e41ddedcb8` * Add a cmdline option to add extra volume tags ([#353](kubernetes-sigs/aws-ebs-csi-driver#353), [@jieyu](https://github.com/jieyu)) * Switch to use kustomize for manifest ([#360](kubernetes-sigs/aws-ebs-csi-driver#360), [@leakingtapan](https://github.com/leakingtapan)) * enable users to set ec2-endpoint for nonstandard regions ([#369](kubernetes-sigs/aws-ebs-csi-driver#369), [@amdonov](https://github.com/amdonov)) * Add standard volume type ([#379](kubernetes-sigs/aws-ebs-csi-driver#379), [@leakingtapan](https://github.com/leakingtapan)) * Update aws sdk version to enable EKS IAM for SA ([#386](kubernetes-sigs/aws-ebs-csi-driver#386), [@leakingtapan](https://github.com/leakingtapan)) * Implement different driver modes and AWS Region override for controller service ([#438](kubernetes-sigs/aws-ebs-csi-driver#438), [@rfranzke](https://github.com/rfranzke)) * Add manifest files for snapshotter 2.0 ([#452](kubernetes-sigs/aws-ebs-csi-driver#452), [@leakingtapan](https://github.com/leakingtapan)) * Return success if instance or volume are not found ([#375](kubernetes-sigs/aws-ebs-csi-driver#375), [@bertinatto](https://github.com/bertinatto)) * Patch k8scsi sidecars CVE-2019-11255 ([#413](kubernetes-sigs/aws-ebs-csi-driver#413), [@jnaulty](https://github.com/jnaulty)) * Handle mount flags in NodeStageVolume ([#430](kubernetes-sigs/aws-ebs-csi-driver#430), [@bertinatto](https://github.com/bertinatto)) * Run upstream e2e test suites with migration ([#341](kubernetes-sigs/aws-ebs-csi-driver#341), [@wongma7](https://github.com/wongma7)) * Use new test framework for test orchestration ([#359](kubernetes-sigs/aws-ebs-csi-driver#359), [@leakingtapan](https://github.com/leakingtapan)) * Update to use 1.16 cluster with inline test enabled ([#362](kubernetes-sigs/aws-ebs-csi-driver#362), [@leakingtapan](https://github.com/leakingtapan)) * Enable leader election ([#380](kubernetes-sigs/aws-ebs-csi-driver#380), [@leakingtapan](https://github.com/leakingtapan)) * Update go mod and mount library ([#388](kubernetes-sigs/aws-ebs-csi-driver#388), [@leakingtapan](https://github.com/leakingtapan)) * Refactor NewCloud by pass in region ([#394](kubernetes-sigs/aws-ebs-csi-driver#394), [@leakingtapan](https://github.com/leakingtapan)) * helm: provide an option to set extra volume tags ([#396](kubernetes-sigs/aws-ebs-csi-driver#396), [@jieyu](https://github.com/jieyu)) * Allow override for csi-provisioner image ([#401](kubernetes-sigs/aws-ebs-csi-driver#401), [@gliptak](https://github.com/gliptak)) * Enable volume expansion e2e test for CSI migration ([#407](kubernetes-sigs/aws-ebs-csi-driver#407), [@leakingtapan](https://github.com/leakingtapan)) * Swith to use kops 1.16 ([#409](kubernetes-sigs/aws-ebs-csi-driver#409), [@leakingtapan](https://github.com/leakingtapan)) * Added tolerations for node support ([#420](kubernetes-sigs/aws-ebs-csi-driver#420), [@zerkms](https://github.com/zerkms)) * Update helm chart to better match available values and add the ability to add annotations ([#423](kubernetes-sigs/aws-ebs-csi-driver#423), [@krmichel](https://github.com/krmichel)) * [helm] Also add toleration support to controller ([#433](kubernetes-sigs/aws-ebs-csi-driver#433), [@jyaworski](https://github.com/jyaworski)) * Add ec2:ModifyVolume action ([#434](kubernetes-sigs/aws-ebs-csi-driver#434), [@zodiac12k](https://github.com/zodiac12k)) * Schedule the EBS CSI DaemonSet on all nodes by default ([#441](kubernetes-sigs/aws-ebs-csi-driver#441), [@pcfens](https://github.com/pcfens)) * bump chart version * chore: bump liveness probe from 1.1.0 to 2.0.0 - Introduce V(5) on the health check begin/success log lines to allow filtering of these entries from logs. If you would like to retain these log entries the action required would be to set `-v==5` or higher for the livenessprobe container. ([#57](kubernetes-csi/livenessprobe#57), [@stefansedich](https://github.com/stefansedich)) - Deprecated "--connection-timeout" argument has been removed. ([#59](kubernetes-csi/livenessprobe#59), [@msau42](https://github.com/msau42)) - Fix nil pointer bug when driver responds with not ready ([#58](kubernetes-csi/livenessprobe#58), [@scuzhanglei](https://github.com/scuzhanglei)) - Migrated to Go modules, so the source builds also outside of GOPATH. ([#53](kubernetes-csi/livenessprobe#53), [@pohly](https://github.com/pohly)) * chore: bump csi external-provisioner from 1.3.0 to 1.4.0 All external-provisioner versions < 1.4.0 are deprecated and will stop functioning in Kubernetes v1.20. See [#323](kubernetes-csi/external-provisioner#323) and [k/k#80978](kubernetes/kubernetes#80978) for more details. Upgrade your external-provisioner to v1.4+ before Kubernetes v1.20. None - Fixes migration scenarios for Topology, fstype, and accessmodes for the kubernetes.io/gce-pd in-tree plugin ([#277](kubernetes-csi/external-provisioner#277), [@davidz627](https://github.com/davidz627)) - Checks if volume content source is populated if creating a volume from a snapshot source. ([#283](kubernetes-csi/external-provisioner#283), [@zhucan](https://github.com/zhucan)) - Fixes issue when SelfLink removal is turned on in Kubernetes. ([#323](kubernetes-csi/external-provisioner#323), [@msau42](https://github.com/msau42)) - CSI driver can return `CreateVolumeResponse` with size 0, which means unknown volume size. In this case, Provisioner will use PVC requested size as PV size rather than 0 bytes ([#271](kubernetes-csi/external-provisioner#271), [@hoyho](https://github.com/hoyho)) - Fixed potential leak of volumes after CSI driver timeouts. ([#312](kubernetes-csi/external-provisioner#312), [@jsafrane](https://github.com/jsafrane)) - Fixes issue where provisioner provisions volumes for in-tree PVC's which have not been migrated ([#341](kubernetes-csi/external-provisioner#341), [@davidz627](https://github.com/davidz627)) - Send the CSI volume_id instead of PVC Name to the csi-driver in volumeCreate when datasource is PVC ([#310](kubernetes-csi/external-provisioner#310), [@Madhu-1](https://github.com/Madhu-1)) - Fixes nil pointer derefence in log when migration turned on ([#342](kubernetes-csi/external-provisioner#342), [@davidz627](https://github.com/davidz627)) - Handle deletion of CSI migrated volumes ([#273](kubernetes-csi/external-provisioner#273), [@ddebroy](https://github.com/ddebroy)) - Reduced logging noise of unrelated PVCs. Emit event on successful provisioning. ([#351](kubernetes-csi/external-provisioner#351), [@jsafrane](https://github.com/jsafrane)) - Added extra verification of source Snapshot and PersistentVolumeClaim before provisioning. ([#352](kubernetes-csi/external-provisioner#352), [@jsafrane](https://github.com/jsafrane)) * chore: bump attacher * Fixed handling of ControllerUnpublish errors. The attacher will retry to ControllerUnpublish a volume after any error except for NotFound. (#168, @jsafrane) * bump external-snapshotter from 1.1.0 to 1.2.2 Breaking Changes * Changes the API group name for the fake VolumeSnapshot object to "snapshot.storage.k8s.io" to be in-sync with the group name of the real VolumeSnapshot object. As a result, the generated interfaces for clientset and informers of VolumeSnapshot are also changed from "VolumeSnapshot" to "Snapshot". (#123, @xing-yang) New Features * Adds Finalizer on the snapshot source PVC to prevent it from being deleted when a snapshot is being created from it. (#47, @xing-yang) Other Notable Changes * Add Status subresource for VolumeSnapshot. (#121, @zhucan) * Cherry picks PR #138: Prebound snapshots will work correctly with CSI drivers that does not support ListSnasphots.(#156, @hakanmemisoglu) * Cherry picks PR #172: Added extra verification of source PersistentVolumeClaim before creating snapshot.(#173, @xing-yang) * bump external-resizer from 0.2.0 to 0.4.0 New Features * Add prometheus metrics to CSI external-resizer under the /metrics endpoint. This can be enabled via the "--metrics-address" and "--metrics-path" options. (#67, @saad-ali) Bug Fixes * Avoid concurrent processing of same PVCs (#6, @mlmhl) * Exit on CSI gRPC conn loss (#55, @ggriffiths) * Verify claimref associated with PVs before resizing (#57, @gnufied) Other Notable Changes * Migrated to Go modules, so the source builds also outside of GOPATH. (#60, @pohly) * feat(awsebscsiprovisioner): updated awsebscsiprovisioner flags - updated args as mentioned in comments - updated container versions as mentioned in the comments D2IQ-64990 #comment updated awsebscsiprovisioner pod arg * feat(awsebscsiprovisioner): added podAnnotations - added statefulSet.podAnnotations feature - added new roles and snapshotter-controller - added more values to be setable D2IQ-64992 #comment updated awsebscsiprovisioner to include statefulSet.podAnnotations * fix: added replacing system-x-critial replacement - this was added for being able to run the ct install / upgrade behaviour so that we also can test with that priorityClassName set pods, that normally get a system-node critial or system-cluster-critical priorityClassName set. These only will be allowed to run in namespace kube-system and that for we need to drop the priorityClassName here to null for our tests. - separated lint and install, as otherwise lint would fail because of the sed changes - exclude gcp-csi-driver [D2IQ-65765] [D2IQ-65765]: https://jira.d2iq.com/browse/D2IQ-65765 Co-authored-by: Sebastian Brandt <[email protected]>

@jieyu

…bs-csi-driver from 0.4.0 to 0.5.0 [Documentation](https://github.com/kubernetes-sigs/aws-ebs-csi-driver/blob/v0.5.0/docs/README.md) filename | sha512 hash --------- | ------------ [v0.5.0.zip](https://github.com/kubernetes-sigs/aws-ebs-csi-driver/archive/v0.5.0.zip) | [v0.5.0.tar.gz](https://github.com/kubernetes-sigs/aws-ebs-csi-driver/archive/v0.5.0.tar.gz) | * Add a cmdline option to add extra volume tags ([#353](kubernetes-sigs/aws-ebs-csi-driver#353), [@jieyu](https://github.com/jieyu)) * Switch to use kustomize for manifest ([#360](kubernetes-sigs/aws-ebs-csi-driver#360), [@leakingtapan](https://github.com/leakingtapan)) * enable users to set ec2-endpoint for nonstandard regions ([#369](kubernetes-sigs/aws-ebs-csi-driver#369), [@amdonov](https://github.com/amdonov)) * Add standard volume type ([#379](kubernetes-sigs/aws-ebs-csi-driver#379), [@leakingtapan](https://github.com/leakingtapan)) * Update aws sdk version to enable EKS IAM for SA ([#386](kubernetes-sigs/aws-ebs-csi-driver#386), [@leakingtapan](https://github.com/leakingtapan)) * Implement different driver modes and AWS Region override for controller service ([#438](kubernetes-sigs/aws-ebs-csi-driver#438), [@rfranzke](https://github.com/rfranzke)) * Add manifest files for snapshotter 2.0 ([#452](kubernetes-sigs/aws-ebs-csi-driver#452), [@leakingtapan](https://github.com/leakingtapan)) * Return success if instance or volume are not found ([#375](kubernetes-sigs/aws-ebs-csi-driver#375), [@bertinatto](https://github.com/bertinatto)) * Patch k8scsi sidecars CVE-2019-11255 ([#413](kubernetes-sigs/aws-ebs-csi-driver#413), [@jnaulty](https://github.com/jnaulty)) * Handle mount flags in NodeStageVolume ([#430](kubernetes-sigs/aws-ebs-csi-driver#430), [@bertinatto](https://github.com/bertinatto)) * Run upstream e2e test suites with migration ([#341](kubernetes-sigs/aws-ebs-csi-driver#341), [@wongma7](https://github.com/wongma7)) * Use new test framework for test orchestration ([#359](kubernetes-sigs/aws-ebs-csi-driver#359), [@leakingtapan](https://github.com/leakingtapan)) * Update to use 1.16 cluster with inline test enabled ([#362](kubernetes-sigs/aws-ebs-csi-driver#362), [@leakingtapan](https://github.com/leakingtapan)) * Enable leader election ([#380](kubernetes-sigs/aws-ebs-csi-driver#380), [@leakingtapan](https://github.com/leakingtapan)) * Update go mod and mount library ([#388](kubernetes-sigs/aws-ebs-csi-driver#388), [@leakingtapan](https://github.com/leakingtapan)) * Refactor NewCloud by pass in region ([#394](kubernetes-sigs/aws-ebs-csi-driver#394), [@leakingtapan](https://github.com/leakingtapan)) * helm: provide an option to set extra volume tags ([#396](kubernetes-sigs/aws-ebs-csi-driver#396), [@jieyu](https://github.com/jieyu)) * Allow override for csi-provisioner image ([#401](kubernetes-sigs/aws-ebs-csi-driver#401), [@gliptak](https://github.com/gliptak)) * Enable volume expansion e2e test for CSI migration ([#407](kubernetes-sigs/aws-ebs-csi-driver#407), [@leakingtapan](https://github.com/leakingtapan)) * Swith to use kops 1.16 ([#409](kubernetes-sigs/aws-ebs-csi-driver#409), [@leakingtapan](https://github.com/leakingtapan)) * Added tolerations for node support ([#420](kubernetes-sigs/aws-ebs-csi-driver#420), [@zerkms](https://github.com/zerkms)) * Update helm chart to better match available values and add the ability to add annotations ([#423](kubernetes-sigs/aws-ebs-csi-driver#423), [@krmichel](https://github.com/krmichel)) * [helm] Also add toleration support to controller ([#433](kubernetes-sigs/aws-ebs-csi-driver#433), [@jyaworski](https://github.com/jyaworski)) * Add ec2:ModifyVolume action ([#434](kubernetes-sigs/aws-ebs-csi-driver#434), [@zodiac12k](https://github.com/zodiac12k)) * Schedule the EBS CSI DaemonSet on all nodes by default ([#441](kubernetes-sigs/aws-ebs-csi-driver#441), [@pcfens](https://github.com/pcfens)) * bump chart version * chore: bump liveness probe from 1.1.0 to 2.0.0 - Introduce V(5) on the health check begin/success log lines to allow filtering of these entries from logs. If you would like to retain these log entries the action required would be to set or higher for the livenessprobe container. ([#57](kubernetes-csi/livenessprobe#57), [@stefansedich](https://github.com/stefansedich)) - Deprecated --connection-timeout argument has been removed. ([#59](kubernetes-csi/livenessprobe#59), [@msau42](https://github.com/msau42)) - Fix nil pointer bug when driver responds with not ready ([#58](kubernetes-csi/livenessprobe#58), [@scuzhanglei](https://github.com/scuzhanglei)) - Migrated to Go modules, so the source builds also outside of GOPATH. ([#53](kubernetes-csi/livenessprobe#53), [@pohly](https://github.com/pohly)) * chore: bump csi external-provisioner from 1.3.0 to 1.4.0 All external-provisioner versions < 1.4.0 are deprecated and will stop functioning in Kubernetes v1.20. See [#323](kubernetes-csi/external-provisioner#323) and [k/k#80978](kubernetes/kubernetes#80978) for more details. Upgrade your external-provisioner to v1.4+ before Kubernetes v1.20. None - Fixes migration scenarios for Topology, fstype, and accessmodes for the kubernetes.io/gce-pd in-tree plugin ([#277](kubernetes-csi/external-provisioner#277), [@davidz627](https://github.com/davidz627)) - Checks if volume content source is populated if creating a volume from a snapshot source. ([#283](kubernetes-csi/external-provisioner#283), [@zhucan](https://github.com/zhucan)) - Fixes issue when SelfLink removal is turned on in Kubernetes. ([#323](kubernetes-csi/external-provisioner#323), [@msau42](https://github.com/msau42)) - CSI driver can return with size 0, which means unknown volume size. In this case, Provisioner will use PVC requested size as PV size rather than 0 bytes ([#271](kubernetes-csi/external-provisioner#271), [@hoyho](https://github.com/hoyho)) - Fixed potential leak of volumes after CSI driver timeouts. ([#312](kubernetes-csi/external-provisioner#312), [@jsafrane](https://github.com/jsafrane)) - Fixes issue where provisioner provisions volumes for in-tree PVC's which have not been migrated ([#341](kubernetes-csi/external-provisioner#341), [@davidz627](https://github.com/davidz627)) - Send the CSI volume_id instead of PVC Name to the csi-driver in volumeCreate when datasource is PVC ([#310](kubernetes-csi/external-provisioner#310), [@Madhu-1](https://github.com/Madhu-1)) - Fixes nil pointer derefence in log when migration turned on ([#342](kubernetes-csi/external-provisioner#342), [@davidz627](https://github.com/davidz627)) - Handle deletion of CSI migrated volumes ([#273](kubernetes-csi/external-provisioner#273), [@ddebroy](https://github.com/ddebroy)) - Reduced logging noise of unrelated PVCs. Emit event on successful provisioning. ([#351](kubernetes-csi/external-provisioner#351), [@jsafrane](https://github.com/jsafrane)) - Added extra verification of source Snapshot and PersistentVolumeClaim before provisioning. ([#352](kubernetes-csi/external-provisioner#352), [@jsafrane](https://github.com/jsafrane)) * chore: bump attacher * Fixed handling of ControllerUnpublish errors. The attacher will retry to ControllerUnpublish a volume after any error except for NotFound. (#168, @jsafrane) * bump external-snapshotter from 1.1.0 to 1.2.2 Breaking Changes * Changes the API group name for the fake VolumeSnapshot object to snapshot.storage.k8s.io to be in-sync with the group name of the real VolumeSnapshot object. As a result, the generated interfaces for clientset and informers of VolumeSnapshot are also changed from VolumeSnapshot to Snapshot. (#123, @xing-yang) New Features * Adds Finalizer on the snapshot source PVC to prevent it from being deleted when a snapshot is being created from it. (#47, @xing-yang) Other Notable Changes * Add Status subresource for VolumeSnapshot. (#121, @zhucan) * Cherry picks PR #138: Prebound snapshots will work correctly with CSI drivers that does not support ListSnasphots.(#156, @hakanmemisoglu) * Cherry picks PR #172: Added extra verification of source PersistentVolumeClaim before creating snapshot.(#173, @xing-yang) * bump external-resizer from 0.2.0 to 0.4.0 New Features * Add prometheus metrics to CSI external-resizer under the /metrics endpoint. This can be enabled via the --metrics-address and --metrics-path options. (#67, @saad-ali) Bug Fixes * Avoid concurrent processing of same PVCs (#6, @mlmhl) * Exit on CSI gRPC conn loss (#55, @ggriffiths) * Verify claimref associated with PVs before resizing (#57, @gnufied) Other Notable Changes * Migrated to Go modules, so the source builds also outside of GOPATH. (#60, @pohly) * feat(awsebscsiprovisioner): updated awsebscsiprovisioner flags - updated args as mentioned in comments - updated container versions as mentioned in the comments D2IQ-64990 #comment updated awsebscsiprovisioner pod arg * feat(awsebscsiprovisioner): added podAnnotations - added statefulSet.podAnnotations feature - added new roles and snapshotter-controller - added more values to be setable D2IQ-64992 #comment updated awsebscsiprovisioner to include statefulSet.podAnnotations * fix: added replacing system-x-critial replacement - this was added for being able to run the ct install / upgrade behaviour so that we also can test with that priorityClassName set pods, that normally get a system-node critial or system-cluster-critical priorityClassName set. These only will be allowed to run in namespace kube-system and that for we need to drop the priorityClassName here to null for our tests. - separated lint and install, as otherwise lint would fail because of the sed changes - exclude gcp-csi-driver [D2IQ-65765] [D2IQ-65765]: https://jira.d2iq.com/browse/D2IQ-65765 Co-authored-by: Sebastian Brandt <[email protected]>

krmichel added 3 commits November 29, 2019 20:56

Update helm chart to better match available values and add the abilit…

d37cdac

…y to add annotations

Update chart version

92f474f

Don't lose default toleration

5419c88

k8s-ci-robot added the cncf-cla: no Indicates the PR's author has not signed the CNCF CLA. label Dec 1, 2019

k8s-ci-robot added needs-ok-to-test Indicates a PR that requires an org member to verify it is safe to test. size/XL Denotes a PR that changes 500-999 lines, ignoring generated files. labels Dec 1, 2019

k8s-ci-robot requested review from bertinatto and jsafrane December 1, 2019 18:08

k8s-ci-robot added cncf-cla: yes Indicates the PR's author has signed the CNCF CLA. and removed cncf-cla: no Indicates the PR's author has not signed the CNCF CLA. labels Dec 1, 2019

k8s-ci-robot assigned bertinatto Dec 1, 2019

k8s-ci-robot added ok-to-test Indicates a non-member PR verified by an org member that is safe to test. and removed needs-ok-to-test Indicates a PR that requires an org member to verify it is safe to test. labels Dec 2, 2019

k8s-ci-robot assigned leakingtapan Dec 2, 2019

leakingtapan reviewed Dec 2, 2019

View reviewed changes

aws-ebs-csi-driver/templates/deployment.yaml Outdated Show resolved Hide resolved

krmichel requested a review from leakingtapan December 2, 2019 23:57

Keep 'beta.kubernetes.io/os: linux' as a hard-coded node selector

a6dd875

krmichel mentioned this pull request Dec 5, 2019

e2e flake: pull-aws-ebs-csi-driver-e2e-single-az kubernetes/kubernetes#85950

Closed

krmichel mentioned this pull request Dec 5, 2019

e2e flake: pull-aws-ebs-csi-driver-e2e-single-az #425

Closed

tyrken reviewed Dec 19, 2019

View reviewed changes

aws-ebs-csi-driver/templates/serviceaccount.yaml Show resolved Hide resolved

Add the ability to have annotations on the service account

6fcc402

k8s-ci-robot added the needs-rebase Indicates a PR cannot be merged because it has merge conflicts with HEAD. label Dec 22, 2019

Merge remote-tracking branch 'upstream/master'

a368e50

k8s-ci-robot removed the needs-rebase Indicates a PR cannot be merged because it has merge conflicts with HEAD. label Dec 22, 2019

k8s-ci-robot added the needs-rebase Indicates a PR cannot be merged because it has merge conflicts with HEAD. label Feb 26, 2020

krmichel added 2 commits February 26, 2020 15:07

Merge remote-tracking branch 'upstream/master'

0c243cd

Add annotation abilities to the new service account

5a73c52

k8s-ci-robot added size/XXL Denotes a PR that changes 1000+ lines, ignoring generated files. and removed needs-rebase Indicates a PR cannot be merged because it has merge conflicts with HEAD. size/XL Denotes a PR that changes 500-999 lines, ignoring generated files. labels Feb 26, 2020

k8s-ci-robot added the lgtm "Looks good to me", indicates that a PR is ready to be merged. label Feb 29, 2020

k8s-ci-robot added the approved Indicates a PR has been approved by an approver from all required OWNERS files. label Feb 29, 2020

k8s-ci-robot merged commit c52ea0e into kubernetes-sigs:master Mar 1, 2020

joejulian mentioned this pull request Mar 6, 2020

chore: update awsebscsiprovisioner chart mesosphere/charts#492

Merged

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Update helm chart to better match available values and add the ability to add annotations #423

Update helm chart to better match available values and add the ability to add annotations #423

krmichel commented Dec 1, 2019 •

edited

Loading

k8s-ci-robot commented Dec 1, 2019

k8s-ci-robot commented Dec 1, 2019

k8s-ci-robot commented Dec 1, 2019

coveralls commented Dec 1, 2019 •

edited

Loading

krmichel commented Dec 1, 2019

krmichel commented Dec 1, 2019

bertinatto commented Dec 2, 2019

bertinatto commented Dec 2, 2019

leakingtapan left a comment •

edited

Loading

krmichel commented Dec 5, 2019

krmichel commented Dec 5, 2019 •

edited

Loading

krmichel commented Dec 5, 2019

leakingtapan commented Feb 26, 2020 •

edited

Loading

krmichel commented Feb 26, 2020

krmichel commented Feb 26, 2020

krmichel commented Feb 26, 2020

krmichel commented Feb 29, 2020

leakingtapan commented Feb 29, 2020 •

edited

Loading

k8s-ci-robot commented Feb 29, 2020

leakingtapan commented Mar 1, 2020

krmichel commented Mar 1, 2020

tyrken commented Mar 1, 2020

Update helm chart to better match available values and add the ability to add annotations #423

Update helm chart to better match available values and add the ability to add annotations #423

Conversation

krmichel commented Dec 1, 2019 • edited Loading

k8s-ci-robot commented Dec 1, 2019

k8s-ci-robot commented Dec 1, 2019

k8s-ci-robot commented Dec 1, 2019

coveralls commented Dec 1, 2019 • edited Loading

Pull Request Test Coverage Report for Build 1012

💛 - Coveralls

krmichel commented Dec 1, 2019

krmichel commented Dec 1, 2019

bertinatto commented Dec 2, 2019

bertinatto commented Dec 2, 2019

leakingtapan left a comment • edited Loading

Choose a reason for hiding this comment

krmichel commented Dec 5, 2019

krmichel commented Dec 5, 2019 • edited Loading

krmichel commented Dec 5, 2019

leakingtapan commented Feb 26, 2020 • edited Loading

krmichel commented Feb 26, 2020

krmichel commented Feb 26, 2020

krmichel commented Feb 26, 2020

krmichel commented Feb 29, 2020

leakingtapan commented Feb 29, 2020 • edited Loading

k8s-ci-robot commented Feb 29, 2020

leakingtapan commented Mar 1, 2020

krmichel commented Mar 1, 2020

tyrken commented Mar 1, 2020

krmichel commented Dec 1, 2019 •

edited

Loading

coveralls commented Dec 1, 2019 •

edited

Loading

leakingtapan left a comment •

edited

Loading

krmichel commented Dec 5, 2019 •

edited

Loading

leakingtapan commented Feb 26, 2020 •

edited

Loading

leakingtapan commented Feb 29, 2020 •

edited

Loading