[GIT PULL] media updates for v5.15-rc1 #3
Closed
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Owner
ammarfaizi2
commented
Sep 1, 2021
ammarfaizi2
commented
Add Geniatech MyGica T230C2_LITE and T230A as many people are asking support for these devices on forums. Link: https://lore.kernel.org/linux-media/YMuptIYFLdwSmw//@kali Signed-off-by: Ján Čáni <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Fix typo in a define: CEC_OP_REC_SEQ_SATERDAY -> CEC_OP_REC_SEQ_SATURDAY This isn't used yet in actual applications to the best of my knowledge, and it certainly doesn't break the ABI since the value doesn't change. Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Drop the "default m", as options should default to disabled. No other media driver is enabled by default. Signed-off-by: Ezequiel Garcia <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
The logic at dib8000_get_init_prbs() has a few issues: 1. the tables used there has an extra unused value at the beginning; 2. the dprintk() message doesn't write the right value when transmission mode is not 8K; 3. the array overflow validation is done by the callers. Rewrite the code to fix such issues. This should also shut up those smatch warnings: drivers/media/dvb-frontends/dib8000.c:2125 dib8000_get_init_prbs() error: buffer overflow 'lut_prbs_8k' 14 <= 14 drivers/media/dvb-frontends/dib8000.c:2129 dib8000_get_init_prbs() error: buffer overflow 'lut_prbs_2k' 14 <= 14 drivers/media/dvb-frontends/dib8000.c:2131 dib8000_get_init_prbs() error: buffer overflow 'lut_prbs_4k' 14 <= 14 drivers/media/dvb-frontends/dib8000.c:2134 dib8000_get_init_prbs() error: buffer overflow 'lut_prbs_8k' 14 <= 14 Signed-off-by: Mauro Carvalho Chehab <[email protected]>
The logic at delta_ipc_open() tries to copy past the size of the name passed to it: drivers/media/platform/sti/delta/delta-ipc.c:178 delta_ipc_open() error: __memcpy() 'name' too small (17 vs 32) Basically,this function is called just one with: ret = delta_ipc_open(pctx, "JPEG_DECODER_HW0", ...); The string used there has just 17 bytes. Yet, the logic tries to copy the entire name size (32 bytes), which is plain wrong. Replace it by strscpy, which is good enough to copy the string, warranting that this will be NUL-terminated. Signed-off-by: Mauro Carvalho Chehab <[email protected]>
As warned by smatch: drivers/media/usb/uvc/uvc_v4l2.c:911 uvc_ioctl_g_input() error: doing dma on the stack (&i) drivers/media/usb/uvc/uvc_v4l2.c:943 uvc_ioctl_s_input() error: doing dma on the stack (&i) those two functions call uvc_query_ctrl passing a pointer to a data at the DMA stack. those are used to send URBs via usb_control_msg(). Using DMA stack is not supported and should not work anymore on modern Linux versions. So, use a kmalloc'ed buffer. Cc: [email protected] # Kernel 4.9 and upper Reviewed-by: Laurent Pinchart <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
As warned by smatch: drivers/media/pci/ivtv/ivtv-i2c.c:245 ivtv_i2c_register() error: buffer overflow 'hw_devicenames' 21 <= 31 drivers/media/pci/ivtv/ivtv-i2c.c:266 ivtv_i2c_register() error: buffer overflow 'hw_addrs' 21 <= 31 drivers/media/pci/ivtv/ivtv-i2c.c:269 ivtv_i2c_register() error: buffer overflow 'hw_addrs' 21 <= 31 drivers/media/pci/ivtv/ivtv-i2c.c:275 ivtv_i2c_register() error: buffer overflow 'hw_addrs' 21 <= 31 drivers/media/pci/ivtv/ivtv-i2c.c:280 ivtv_i2c_register() error: buffer overflow 'hw_addrs' 21 <= 31 drivers/media/pci/ivtv/ivtv-i2c.c:290 ivtv_i2c_register() error: buffer overflow 'hw_addrs' 21 <= 31 The logic at ivtv_i2c_register() could let buffer overflows at hw_devicenames and hw_addrs arrays. This won't happen in practice due to a carefully-contructed logic, but it is not error-prune. Change the logic in a way that will make clearer that the I2C hardware flags will affect the size of those two arrays, and add an explicit check to avoid buffer overflows. While here, use the bit macro. Reviewed-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
If HEVC frame consists of multiple slices, segment address has to be known in order to properly decode it. Add segment address field to slice parameters. Signed-off-by: Jernej Skrabec <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Now that segment address is available, support for multi-slice frames can be easily added. Signed-off-by: Jernej Skrabec <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
change 'syncrous' into 'synchronous' Signed-off-by: Herman <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Change 'Fliker' into 'Flicker'. Signed-off-by: Herman <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
The variable ret is being initialized with a value that is never read,
it is being updated later on. The assignment is redundant and can be
removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <[email protected]>
Acked-by: Sakari Ailus <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
SAMA5D2 does not have the YCYC field for the RLP (rounding, limiting, packaging) module. The YCYC field is supposed to work with interleaved YUV formats like YUYV. In SAMA5D2, we have to use YYCC field, which is used for both planar formats like YUV420 and interleaved formats like YUYV. Fix the according rlp callback to replace the generic YCYC field (which makes more sense from a logical point of view) with the required YYCC field. Fixes: debfa49 ("media: atmel: atmel-isc-base: add support for more formats and additional pipeline modules") Signed-off-by: Eugen Hristev <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
…ably > Probably Change 'Proabably' into 'Probably'. Signed-off-by: Herman <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
deleted the repeated word 'the' in the comments. Signed-off-by: lijian <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
The wrappers in include/linux/pci-dma-compat.h should go away.
The patch has been generated with the coccinelle script below and has been
hand modified to replace GFP_ with a correct flag.
It has been compile tested.
When memory is allocated in 'saa7134_pgtable_alloc()', GFP_KERNEL can be
used because its 4 callers (one function calls it 2 times, so there is
only 3 functions that call it):
.hw_params in a struct snd_pcm_ops (saa7134-alsa.c)
--> snd_card_saa7134_hw_params (saa7134-alsa.c)
--> saa7134_pgtable_alloc
==> .hw_params function can use GFP_KERNEL
saa7134_initdev (saa7134-core.c)
--> saa7134_hwinit1 (saa7134-core.c)
--> saa7134_ts_init1 (saa7134-ts.c)
--> saa7134_pgtable_alloc
==> saa7134_initdev already uses GFP_KERNEL
saa7134_initdev (saa7134-core.c)
--> saa7134_hwinit1 (saa7134-core.c)
--> saa7134_video_init1 (saa7134-video.c)
--> saa7134_pgtable_alloc (called 2 times)
==> saa7134_initdev already uses GFP_KERNEL
and no spin_lock is taken in the between.
@@ @@
- PCI_DMA_BIDIRECTIONAL
+ DMA_BIDIRECTIONAL
@@ @@
- PCI_DMA_TODEVICE
+ DMA_TO_DEVICE
@@ @@
- PCI_DMA_FROMDEVICE
+ DMA_FROM_DEVICE
@@ @@
- PCI_DMA_NONE
+ DMA_NONE
@@
expression e1, e2, e3;
@@
- pci_alloc_consistent(e1, e2, e3)
+ dma_alloc_coherent(&e1->dev, e2, e3, GFP_)
@@
expression e1, e2, e3;
@@
- pci_zalloc_consistent(e1, e2, e3)
+ dma_alloc_coherent(&e1->dev, e2, e3, GFP_)
@@
expression e1, e2, e3, e4;
@@
- pci_free_consistent(e1, e2, e3, e4)
+ dma_free_coherent(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_map_single(e1, e2, e3, e4)
+ dma_map_single(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_unmap_single(e1, e2, e3, e4)
+ dma_unmap_single(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4, e5;
@@
- pci_map_page(e1, e2, e3, e4, e5)
+ dma_map_page(&e1->dev, e2, e3, e4, e5)
@@
expression e1, e2, e3, e4;
@@
- pci_unmap_page(e1, e2, e3, e4)
+ dma_unmap_page(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_map_sg(e1, e2, e3, e4)
+ dma_map_sg(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_unmap_sg(e1, e2, e3, e4)
+ dma_unmap_sg(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_dma_sync_single_for_cpu(e1, e2, e3, e4)
+ dma_sync_single_for_cpu(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_dma_sync_single_for_device(e1, e2, e3, e4)
+ dma_sync_single_for_device(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_dma_sync_sg_for_cpu(e1, e2, e3, e4)
+ dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_dma_sync_sg_for_device(e1, e2, e3, e4)
+ dma_sync_sg_for_device(&e1->dev, e2, e3, e4)
@@
expression e1, e2;
@@
- pci_dma_mapping_error(e1, e2)
+ dma_mapping_error(&e1->dev, e2)
@@
expression e1, e2;
@@
- pci_set_dma_mask(e1, e2)
+ dma_set_mask(&e1->dev, e2)
@@
expression e1, e2;
@@
- pci_set_consistent_dma_mask(e1, e2)
+ dma_set_coherent_mask(&e1->dev, e2)
Signed-off-by: Christophe JAILLET <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
… deed imporant' > 'indeed important' Change 'imporant' into 'important'. Signed-off-by: Herman <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Without this patch, the TDA19971 chip's EDID is inactive. EDID never worked with this driver, it was all tested with HDMI signal sources which don't need EDID support. Signed-off-by: Krzysztof Halasa <[email protected]> Fixes: 9ac0038 ("media: i2c: Add TDA1997x HDMI receiver driver") Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
The max number of allowed logical addresses was set to 1 in vivid, for no good reason. This prevented testing with multiple logical addresses for the same CEC device. Increase this number to CEC_MAX_LOG_ADDRS. Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
…ttig' > 'getting' Change 'gettig' into 'getting'. Signed-off-by: Herman <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Convert list_for_each() to list_for_each_entry() where applicable. Signed-off-by: Yang Yingliang <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
The continue statement at the end of a for-loop has no effect,
remove it.
Addresses-Coverity: ("Continue has no effect")
Signed-off-by: Colin Ian King <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
v4l2-compliance complains about g/s_parm when using the non-MC API. Fix it by adding the functions and just call v4l2_s/g_parm_cap for the phy subdev. Signed-off-by: Tomi Valkeinen <[email protected]> Reviewed-by: Laurent Pinchart <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
cal_camerarx_create() doesn't handle error returned from cal_camerarx_sd_init_cfg(). Fix this. Signed-off-by: Tomi Valkeinen <[email protected]> Reviewed-by: Laurent Pinchart <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
cal_camerarx->dev field is not used, remove it. Signed-off-by: Tomi Valkeinen <[email protected]> Reviewed-by: Laurent Pinchart <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
CAL driver uses "sensor" name to refer to the subdev connected to CAL. As the subdev can also be a bridge, the naming is misleading and might cause the reader to think it refers to the actual sensor at the end of the pipeline. Rename "sensor" to "source". Signed-off-by: Tomi Valkeinen <[email protected]> Reviewed-by: Laurent Pinchart <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
…runtime resume For some reason CAL_CTRL is written at the end of cal_ctx_wr_dma_config. CAL_CTRL is a global (for CAL) register, so it should be independent of contexts. Move the code to cal_runtime_resume(). Signed-off-by: Tomi Valkeinen <[email protected]> Reviewed-by: Laurent Pinchart <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
CAL driver uses V4L2_CID_PIXEL_RATE to get the required pixel rate, and then changes that value to link rate before configuring the registers. Rewrite the code to use v4l2_get_link_freq(), which simplifies the code as we get the link rate directly, and it also adds support for V4L2_CID_LINK_FREQ. Signed-off-by: Tomi Valkeinen <[email protected]> Reviewed-by: Laurent Pinchart <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
In the following patches we need to do context configuration which might fail. Add new functions, cal_ctx_prepare and cal_ctx_unprepare, to handle such configuration. [hverkuil: fix spurious newline checkpatch warning] Signed-off-by: Tomi Valkeinen <[email protected]> Reviewed-by: Laurent Pinchart <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
cal_ctx's index and cport fields are numbers less than 8. In the following patches we will get a bunch of new fields, all of which are similar small numbers, so lets change the type to u8. Signed-off-by: Tomi Valkeinen <[email protected]> Reviewed-by: Laurent Pinchart <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
ammarfaizi2
pushed a commit
that referenced
this pull request
Aug 8, 2023
Victor Nogueira says: ==================== net: sched: Fixes for classifiers Four different classifiers (bpf, u32, matchall, and flower) are calling tcf_bind_filter in their callbacks, but arent't undoing it by calling tcf_unbind_filter if their was an error after binding. This patch set fixes all this by calling tcf_unbind_filter in such cases. This set also undoes a refcount decrement in cls_u32 when an update fails under specific conditions which are described in patch #3. v1 -> v2: * Remove blank line after fixes tag * Fix reverse xmas tree issues pointed out by Simon v2 -> v3: * Inline functions cls_bpf_set_parms and fl_set_parms to avoid adding yet another parameter (and a return value at it) to them. * Remove similar fixes for u32 and matchall, which will be sent soon, once we find a way to do the fixes without adding a return parameter to their set_parms functions. v3 -> v4: * Inline mall_set_parms to avoid adding yet another parameter. * Remove set_flags parameter from u32_set_parms and create a separate function for calling tcf_bind_filter and tcf_unbind_filter in case of failure. * Change cover letter title to also encompass refcnt fix for u32 v4 -> v5: * Change back tag to net ==================== Signed-off-by: David S. Miller <[email protected]>
ammarfaizi2
pushed a commit
that referenced
this pull request
Aug 8, 2023
The cited commit holds encap tbl lock unconditionally when setting up dests. But it may cause the following deadlock: PID: 1063722 TASK: ffffa062ca5d0000 CPU: 13 COMMAND: "handler8" #0 [ffffb14de05b7368] __schedule at ffffffffa1d5aa91 #1 [ffffb14de05b7410] schedule at ffffffffa1d5afdb #2 [ffffb14de05b7430] schedule_preempt_disabled at ffffffffa1d5b528 #3 [ffffb14de05b7440] __mutex_lock at ffffffffa1d5d6cb #4 [ffffb14de05b74e8] mutex_lock_nested at ffffffffa1d5ddeb #5 [ffffb14de05b74f8] mlx5e_tc_tun_encap_dests_set at ffffffffc12f2096 [mlx5_core] #6 [ffffb14de05b7568] post_process_attr at ffffffffc12d9fc5 [mlx5_core] #7 [ffffb14de05b75a0] mlx5e_tc_add_fdb_flow at ffffffffc12de877 [mlx5_core] #8 [ffffb14de05b75f0] __mlx5e_add_fdb_flow at ffffffffc12e0eef [mlx5_core] #9 [ffffb14de05b7660] mlx5e_tc_add_flow at ffffffffc12e12f7 [mlx5_core] #10 [ffffb14de05b76b8] mlx5e_configure_flower at ffffffffc12e1686 [mlx5_core] #11 [ffffb14de05b7720] mlx5e_rep_indr_offload at ffffffffc12e3817 [mlx5_core] #12 [ffffb14de05b7730] mlx5e_rep_indr_setup_tc_cb at ffffffffc12e388a [mlx5_core] #13 [ffffb14de05b7740] tc_setup_cb_add at ffffffffa1ab2ba8 #14 [ffffb14de05b77a0] fl_hw_replace_filter at ffffffffc0bdec2f [cls_flower] #15 [ffffb14de05b7868] fl_change at ffffffffc0be6caa [cls_flower] #16 [ffffb14de05b7908] tc_new_tfilter at ffffffffa1ab71f0 [1031218.028143] wait_for_completion+0x24/0x30 [1031218.028589] mlx5e_update_route_decap_flows+0x9a/0x1e0 [mlx5_core] [1031218.029256] mlx5e_tc_fib_event_work+0x1ad/0x300 [mlx5_core] [1031218.029885] process_one_work+0x24e/0x510 Actually no need to hold encap tbl lock if there is no encap action. Fix it by checking if encap action exists or not before holding encap tbl lock. Fixes: 37c3b9f ("net/mlx5e: Prevent encap offload when neigh update is running") Signed-off-by: Chris Mi <[email protected]> Reviewed-by: Vlad Buslov <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
ammarfaizi2
pushed a commit
that referenced
this pull request
Aug 8, 2023
syzkaller found zero division error [0] in div_s64_rem() called from
get_cycle_time_elapsed(), where sched->cycle_time is the divisor.
We have tests in parse_taprio_schedule() so that cycle_time will never
be 0, and actually cycle_time is not 0 in get_cycle_time_elapsed().
The problem is that the types of divisor are different; cycle_time is
s64, but the argument of div_s64_rem() is s32.
syzkaller fed this input and 0x100000000 is cast to s32 to be 0.
@TCA_TAPRIO_ATTR_SCHED_CYCLE_TIME={0xc, 0x8, 0x100000000}
We use s64 for cycle_time to cast it to ktime_t, so let's keep it and
set max for cycle_time.
While at it, we prevent overflow in setup_txtime() and add another
test in parse_taprio_schedule() to check if cycle_time overflows.
Also, we add a new tdc test case for this issue.
[0]:
divide error: 0000 [#1] PREEMPT SMP KASAN NOPTI
CPU: 1 PID: 103 Comm: kworker/1:3 Not tainted 6.5.0-rc1-00330-g60cc1f7d0605 #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
Workqueue: ipv6_addrconf addrconf_dad_work
RIP: 0010:div_s64_rem include/linux/math64.h:42 [inline]
RIP: 0010:get_cycle_time_elapsed net/sched/sch_taprio.c:223 [inline]
RIP: 0010:find_entry_to_transmit+0x252/0x7e0 net/sched/sch_taprio.c:344
Code: 3c 02 00 0f 85 5e 05 00 00 48 8b 4c 24 08 4d 8b bd 40 01 00 00 48 8b 7c 24 48 48 89 c8 4c 29 f8 48 63 f7 48 99 48 89 74 24 70 <48> f7 fe 48 29 d1 48 8d 04 0f 49 89 cc 48 89 44 24 20 49 8d 85 10
RSP: 0018:ffffc90000acf260 EFLAGS: 00010206
RAX: 177450e0347560cf RBX: 0000000000000000 RCX: 177450e0347560cf
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000100000000
RBP: 0000000000000056 R08: 0000000000000000 R09: ffffed10020a0934
R10: ffff8880105049a7 R11: ffff88806cf3a520 R12: ffff888010504800
R13: ffff88800c00d800 R14: ffff8880105049a0 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff88806cf00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f0edf84f0e8 CR3: 000000000d73c002 CR4: 0000000000770ee0
PKRU: 55555554
Call Trace:
<TASK>
get_packet_txtime net/sched/sch_taprio.c:508 [inline]
taprio_enqueue_one+0x900/0xff0 net/sched/sch_taprio.c:577
taprio_enqueue+0x378/0xae0 net/sched/sch_taprio.c:658
dev_qdisc_enqueue+0x46/0x170 net/core/dev.c:3732
__dev_xmit_skb net/core/dev.c:3821 [inline]
__dev_queue_xmit+0x1b2f/0x3000 net/core/dev.c:4169
dev_queue_xmit include/linux/netdevice.h:3088 [inline]
neigh_resolve_output net/core/neighbour.c:1552 [inline]
neigh_resolve_output+0x4a7/0x780 net/core/neighbour.c:1532
neigh_output include/net/neighbour.h:544 [inline]
ip6_finish_output2+0x924/0x17d0 net/ipv6/ip6_output.c:135
__ip6_finish_output+0x620/0xaa0 net/ipv6/ip6_output.c:196
ip6_finish_output net/ipv6/ip6_output.c:207 [inline]
NF_HOOK_COND include/linux/netfilter.h:292 [inline]
ip6_output+0x206/0x410 net/ipv6/ip6_output.c:228
dst_output include/net/dst.h:458 [inline]
NF_HOOK.constprop.0+0xea/0x260 include/linux/netfilter.h:303
ndisc_send_skb+0x872/0xe80 net/ipv6/ndisc.c:508
ndisc_send_ns+0xb5/0x130 net/ipv6/ndisc.c:666
addrconf_dad_work+0xc14/0x13f0 net/ipv6/addrconf.c:4175
process_one_work+0x92c/0x13a0 kernel/workqueue.c:2597
worker_thread+0x60f/0x1240 kernel/workqueue.c:2748
kthread+0x2fe/0x3f0 kernel/kthread.c:389
ret_from_fork+0x2c/0x50 arch/x86/entry/entry_64.S:308
</TASK>
Modules linked in:
Fixes: 4cfd577 ("taprio: Add support for txtime-assist mode")
Reported-by: syzkaller <[email protected]>
Signed-off-by: Kuniyuki Iwashima <[email protected]>
Co-developed-by: Eric Dumazet <[email protected]>
Co-developed-by: Pedro Tammela <[email protected]>
Acked-by: Vinicius Costa Gomes <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
ammarfaizi2
pushed a commit
that referenced
this pull request
Aug 11, 2023
Ido Schimmel says: ==================== nexthop: Nexthop dump fixes Patches #1 and #3 fix two problems related to nexthops and nexthop buckets dump, respectively. Patch #2 is a preparation for the third patch. The pattern described in these patches of splitting the NLMSG_DONE to a separate response is prevalent in other rtnetlink dump callbacks. I don't know if it's because I'm missing something or if this was done intentionally to ensure the message is delivered to user space. After commit 0642840 ("af_netlink: ensure that NLMSG_DONE never fails in dumps") this is no longer necessary and I can improve these dump callbacks assuming this analysis is correct. No regressions in existing tests: # ./fib_nexthops.sh [...] Tests passed: 230 Tests failed: 0 ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
ammarfaizi2
pushed a commit
that referenced
this pull request
Oct 9, 2023
Fix the deadlock by refactoring the MR cache cleanup flow to flush the workqueue without holding the rb_lock. This adds a race between cache cleanup and creation of new entries which we solve by denied creation of new entries after cache cleanup started. Lockdep: WARNING: possible circular locking dependency detected [ 2785.326074 ] 6.2.0-rc6_for_upstream_debug_2023_01_31_14_02 #1 Not tainted [ 2785.339778 ] ------------------------------------------------------ [ 2785.340848 ] devlink/53872 is trying to acquire lock: [ 2785.341701 ] ffff888124f8c0c8 ((work_completion)(&(&ent->dwork)->work)){+.+.}-{0:0}, at: __flush_work+0xc8/0x900 [ 2785.343403 ] [ 2785.343403 ] but task is already holding lock: [ 2785.344464 ] ffff88817e8f1260 (&dev->cache.rb_lock){+.+.}-{3:3}, at: mlx5_mkey_cache_cleanup+0x77/0x250 [mlx5_ib] [ 2785.346273 ] [ 2785.346273 ] which lock already depends on the new lock. [ 2785.346273 ] [ 2785.347720 ] [ 2785.347720 ] the existing dependency chain (in reverse order) is: [ 2785.349003 ] [ 2785.349003 ] -> #1 (&dev->cache.rb_lock){+.+.}-{3:3}: [ 2785.350160 ] __mutex_lock+0x14c/0x15c0 [ 2785.350962 ] delayed_cache_work_func+0x2d1/0x610 [mlx5_ib] [ 2785.352044 ] process_one_work+0x7c2/0x1310 [ 2785.352879 ] worker_thread+0x59d/0xec0 [ 2785.353636 ] kthread+0x28f/0x330 [ 2785.354370 ] ret_from_fork+0x1f/0x30 [ 2785.355135 ] [ 2785.355135 ] -> #0 ((work_completion)(&(&ent->dwork)->work)){+.+.}-{0:0}: [ 2785.356515 ] __lock_acquire+0x2d8a/0x5fe0 [ 2785.357349 ] lock_acquire+0x1c1/0x540 [ 2785.358121 ] __flush_work+0xe8/0x900 [ 2785.358852 ] __cancel_work_timer+0x2c7/0x3f0 [ 2785.359711 ] mlx5_mkey_cache_cleanup+0xfb/0x250 [mlx5_ib] [ 2785.360781 ] mlx5_ib_stage_pre_ib_reg_umr_cleanup+0x16/0x30 [mlx5_ib] [ 2785.361969 ] __mlx5_ib_remove+0x68/0x120 [mlx5_ib] [ 2785.362960 ] mlx5r_remove+0x63/0x80 [mlx5_ib] [ 2785.363870 ] auxiliary_bus_remove+0x52/0x70 [ 2785.364715 ] device_release_driver_internal+0x3c1/0x600 [ 2785.365695 ] bus_remove_device+0x2a5/0x560 [ 2785.366525 ] device_del+0x492/0xb80 [ 2785.367276 ] mlx5_detach_device+0x1a9/0x360 [mlx5_core] [ 2785.368615 ] mlx5_unload_one_devl_locked+0x5a/0x110 [mlx5_core] [ 2785.369934 ] mlx5_devlink_reload_down+0x292/0x580 [mlx5_core] [ 2785.371292 ] devlink_reload+0x439/0x590 [ 2785.372075 ] devlink_nl_cmd_reload+0xaef/0xff0 [ 2785.372973 ] genl_family_rcv_msg_doit.isra.0+0x1bd/0x290 [ 2785.374011 ] genl_rcv_msg+0x3ca/0x6c0 [ 2785.374798 ] netlink_rcv_skb+0x12c/0x360 [ 2785.375612 ] genl_rcv+0x24/0x40 [ 2785.376295 ] netlink_unicast+0x438/0x710 [ 2785.377121 ] netlink_sendmsg+0x7a1/0xca0 [ 2785.377926 ] sock_sendmsg+0xc5/0x190 [ 2785.378668 ] __sys_sendto+0x1bc/0x290 [ 2785.379440 ] __x64_sys_sendto+0xdc/0x1b0 [ 2785.380255 ] do_syscall_64+0x3d/0x90 [ 2785.381031 ] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 2785.381967 ] [ 2785.381967 ] other info that might help us debug this: [ 2785.381967 ] [ 2785.383448 ] Possible unsafe locking scenario: [ 2785.383448 ] [ 2785.384544 ] CPU0 CPU1 [ 2785.385383 ] ---- ---- [ 2785.386193 ] lock(&dev->cache.rb_lock); [ 2785.386940 ] lock((work_completion)(&(&ent->dwork)->work)); [ 2785.388327 ] lock(&dev->cache.rb_lock); [ 2785.389425 ] lock((work_completion)(&(&ent->dwork)->work)); [ 2785.390414 ] [ 2785.390414 ] *** DEADLOCK *** [ 2785.390414 ] [ 2785.391579 ] 6 locks held by devlink/53872: [ 2785.392341 ] #0: ffffffff84c17a50 (cb_lock){++++}-{3:3}, at: genl_rcv+0x15/0x40 [ 2785.393630 ] #1: ffff888142280218 (&devlink->lock_key){+.+.}-{3:3}, at: devlink_get_from_attrs_lock+0x12d/0x2d0 [ 2785.395324 ] #2: ffff8881422d3c38 (&dev->lock_key){+.+.}-{3:3}, at: mlx5_unload_one_devl_locked+0x4a/0x110 [mlx5_core] [ 2785.397322 ] #3: ffffffffa0e59068 (mlx5_intf_mutex){+.+.}-{3:3}, at: mlx5_detach_device+0x60/0x360 [mlx5_core] [ 2785.399231 ] #4: ffff88810e3cb0e8 (&dev->mutex){....}-{3:3}, at: device_release_driver_internal+0x8d/0x600 [ 2785.400864 ] #5: ffff88817e8f1260 (&dev->cache.rb_lock){+.+.}-{3:3}, at: mlx5_mkey_cache_cleanup+0x77/0x250 [mlx5_ib] Fixes: b958451 ("RDMA/mlx5: Change the cache structure to an RB-tree") Signed-off-by: Shay Drory <[email protected]> Signed-off-by: Michael Guralnik <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]>
ammarfaizi2
pushed a commit
that referenced
this pull request
Dec 26, 2023
syzbot found a potential circular dependency leading to a deadlock:
-> #3 (&hdev->req_lock){+.+.}-{3:3}:
__mutex_lock_common+0x1b6/0x1bc2 kernel/locking/mutex.c:599
__mutex_lock kernel/locking/mutex.c:732 [inline]
mutex_lock_nested+0x17/0x1c kernel/locking/mutex.c:784
hci_dev_do_close+0x3f/0x9f net/bluetooth/hci_core.c:551
hci_rfkill_set_block+0x130/0x1ac net/bluetooth/hci_core.c:935
rfkill_set_block+0x1e6/0x3b8 net/rfkill/core.c:345
rfkill_fop_write+0x2d8/0x672 net/rfkill/core.c:1274
vfs_write+0x277/0xcf5 fs/read_write.c:594
ksys_write+0x19b/0x2bd fs/read_write.c:650
do_syscall_x64 arch/x86/entry/common.c:55 [inline]
do_syscall_64+0x51/0xba arch/x86/entry/common.c:93
entry_SYSCALL_64_after_hwframe+0x61/0xcb
-> #2 (rfkill_global_mutex){+.+.}-{3:3}:
__mutex_lock_common+0x1b6/0x1bc2 kernel/locking/mutex.c:599
__mutex_lock kernel/locking/mutex.c:732 [inline]
mutex_lock_nested+0x17/0x1c kernel/locking/mutex.c:784
rfkill_register+0x30/0x7e3 net/rfkill/core.c:1045
hci_register_dev+0x48f/0x96d net/bluetooth/hci_core.c:2622
__vhci_create_device drivers/bluetooth/hci_vhci.c:341 [inline]
vhci_create_device+0x3ad/0x68f drivers/bluetooth/hci_vhci.c:374
vhci_get_user drivers/bluetooth/hci_vhci.c:431 [inline]
vhci_write+0x37b/0x429 drivers/bluetooth/hci_vhci.c:511
call_write_iter include/linux/fs.h:2109 [inline]
new_sync_write fs/read_write.c:509 [inline]
vfs_write+0xaa8/0xcf5 fs/read_write.c:596
ksys_write+0x19b/0x2bd fs/read_write.c:650
do_syscall_x64 arch/x86/entry/common.c:55 [inline]
do_syscall_64+0x51/0xba arch/x86/entry/common.c:93
entry_SYSCALL_64_after_hwframe+0x61/0xcb
-> #1 (&data->open_mutex){+.+.}-{3:3}:
__mutex_lock_common+0x1b6/0x1bc2 kernel/locking/mutex.c:599
__mutex_lock kernel/locking/mutex.c:732 [inline]
mutex_lock_nested+0x17/0x1c kernel/locking/mutex.c:784
vhci_send_frame+0x68/0x9c drivers/bluetooth/hci_vhci.c:75
hci_send_frame+0x1cc/0x2ff net/bluetooth/hci_core.c:2989
hci_sched_acl_pkt net/bluetooth/hci_core.c:3498 [inline]
hci_sched_acl net/bluetooth/hci_core.c:3583 [inline]
hci_tx_work+0xb94/0x1a60 net/bluetooth/hci_core.c:3654
process_one_work+0x901/0xfb8 kernel/workqueue.c:2310
worker_thread+0xa67/0x1003 kernel/workqueue.c:2457
kthread+0x36a/0x430 kernel/kthread.c:319
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:298
-> #0 ((work_completion)(&hdev->tx_work)){+.+.}-{0:0}:
check_prev_add kernel/locking/lockdep.c:3053 [inline]
check_prevs_add kernel/locking/lockdep.c:3172 [inline]
validate_chain kernel/locking/lockdep.c:3787 [inline]
__lock_acquire+0x2d32/0x77fa kernel/locking/lockdep.c:5011
lock_acquire+0x273/0x4d5 kernel/locking/lockdep.c:5622
__flush_work+0xee/0x19f kernel/workqueue.c:3090
hci_dev_close_sync+0x32f/0x1113 net/bluetooth/hci_sync.c:4352
hci_dev_do_close+0x47/0x9f net/bluetooth/hci_core.c:553
hci_rfkill_set_block+0x130/0x1ac net/bluetooth/hci_core.c:935
rfkill_set_block+0x1e6/0x3b8 net/rfkill/core.c:345
rfkill_fop_write+0x2d8/0x672 net/rfkill/core.c:1274
vfs_write+0x277/0xcf5 fs/read_write.c:594
ksys_write+0x19b/0x2bd fs/read_write.c:650
do_syscall_x64 arch/x86/entry/common.c:55 [inline]
do_syscall_64+0x51/0xba arch/x86/entry/common.c:93
entry_SYSCALL_64_after_hwframe+0x61/0xcb
This change removes the need for acquiring the open_mutex in
vhci_send_frame, thus eliminating the potential deadlock while
maintaining the required packet ordering.
Fixes: 92d4abd ("Bluetooth: vhci: Fix race when opening vhci device")
Signed-off-by: Ying Hsu <[email protected]>
Signed-off-by: Luiz Augusto von Dentz <[email protected]>
ammarfaizi2
pushed a commit
that referenced
this pull request
Dec 26, 2023
Calling led_trigger_register() when attaching a PHY located on an SFP
module potentially (and practically) leads into a deadlock.
Fix this by not calling led_trigger_register() for PHYs localted on SFP
modules as such modules actually never got any LEDs.
======================================================
WARNING: possible circular locking dependency detected
6.7.0-rc4-next-20231208+ #0 Tainted: G O
------------------------------------------------------
kworker/u8:2/43 is trying to acquire lock:
ffffffc08108c4e8 (triggers_list_lock){++++}-{3:3}, at: led_trigger_register+0x4c/0x1a8
but task is already holding lock:
ffffff80c5c6f318 (&sfp->sm_mutex){+.+.}-{3:3}, at: cleanup_module+0x2ba8/0x3120 [sfp]
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #3 (&sfp->sm_mutex){+.+.}-{3:3}:
__mutex_lock+0x88/0x7a0
mutex_lock_nested+0x20/0x28
cleanup_module+0x2ae0/0x3120 [sfp]
sfp_register_bus+0x5c/0x9c
sfp_register_socket+0x48/0xd4
cleanup_module+0x271c/0x3120 [sfp]
platform_probe+0x64/0xb8
really_probe+0x17c/0x3c0
__driver_probe_device+0x78/0x164
driver_probe_device+0x3c/0xd4
__driver_attach+0xec/0x1f0
bus_for_each_dev+0x60/0xa0
driver_attach+0x20/0x28
bus_add_driver+0x108/0x208
driver_register+0x5c/0x118
__platform_driver_register+0x24/0x2c
init_module+0x28/0xa7c [sfp]
do_one_initcall+0x70/0x2ec
do_init_module+0x54/0x1e4
load_module+0x1b78/0x1c8c
__do_sys_init_module+0x1bc/0x2cc
__arm64_sys_init_module+0x18/0x20
invoke_syscall.constprop.0+0x4c/0xdc
do_el0_svc+0x3c/0xbc
el0_svc+0x34/0x80
el0t_64_sync_handler+0xf8/0x124
el0t_64_sync+0x150/0x154
-> #2 (rtnl_mutex){+.+.}-{3:3}:
__mutex_lock+0x88/0x7a0
mutex_lock_nested+0x20/0x28
rtnl_lock+0x18/0x20
set_device_name+0x30/0x130
netdev_trig_activate+0x13c/0x1ac
led_trigger_set+0x118/0x234
led_trigger_write+0x104/0x17c
sysfs_kf_bin_write+0x64/0x80
kernfs_fop_write_iter+0x128/0x1b4
vfs_write+0x178/0x2a4
ksys_write+0x58/0xd4
__arm64_sys_write+0x18/0x20
invoke_syscall.constprop.0+0x4c/0xdc
do_el0_svc+0x3c/0xbc
el0_svc+0x34/0x80
el0t_64_sync_handler+0xf8/0x124
el0t_64_sync+0x150/0x154
-> #1 (&led_cdev->trigger_lock){++++}-{3:3}:
down_write+0x4c/0x13c
led_trigger_write+0xf8/0x17c
sysfs_kf_bin_write+0x64/0x80
kernfs_fop_write_iter+0x128/0x1b4
vfs_write+0x178/0x2a4
ksys_write+0x58/0xd4
__arm64_sys_write+0x18/0x20
invoke_syscall.constprop.0+0x4c/0xdc
do_el0_svc+0x3c/0xbc
el0_svc+0x34/0x80
el0t_64_sync_handler+0xf8/0x124
el0t_64_sync+0x150/0x154
-> #0 (triggers_list_lock){++++}-{3:3}:
__lock_acquire+0x12a0/0x2014
lock_acquire+0x100/0x2ac
down_write+0x4c/0x13c
led_trigger_register+0x4c/0x1a8
phy_led_triggers_register+0x9c/0x214
phy_attach_direct+0x154/0x36c
phylink_attach_phy+0x30/0x60
phylink_sfp_connect_phy+0x140/0x510
sfp_add_phy+0x34/0x50
init_module+0x15c/0xa7c [sfp]
cleanup_module+0x1d94/0x3120 [sfp]
cleanup_module+0x2bb4/0x3120 [sfp]
process_one_work+0x1f8/0x4ec
worker_thread+0x1e8/0x3d8
kthread+0x104/0x110
ret_from_fork+0x10/0x20
other info that might help us debug this:
Chain exists of:
triggers_list_lock --> rtnl_mutex --> &sfp->sm_mutex
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&sfp->sm_mutex);
lock(rtnl_mutex);
lock(&sfp->sm_mutex);
lock(triggers_list_lock);
*** DEADLOCK ***
4 locks held by kworker/u8:2/43:
#0: ffffff80c000f938 ((wq_completion)events_power_efficient){+.+.}-{0:0}, at: process_one_work+0x150/0x4ec
#1: ffffffc08214bde8 ((work_completion)(&(&sfp->timeout)->work)){+.+.}-{0:0}, at: process_one_work+0x150/0x4ec
#2: ffffffc0810902f8 (rtnl_mutex){+.+.}-{3:3}, at: rtnl_lock+0x18/0x20
#3: ffffff80c5c6f318 (&sfp->sm_mutex){+.+.}-{3:3}, at: cleanup_module+0x2ba8/0x3120 [sfp]
stack backtrace:
CPU: 0 PID: 43 Comm: kworker/u8:2 Tainted: G O 6.7.0-rc4-next-20231208+ #0
Hardware name: Bananapi BPI-R4 (DT)
Workqueue: events_power_efficient cleanup_module [sfp]
Call trace:
dump_backtrace+0xa8/0x10c
show_stack+0x14/0x1c
dump_stack_lvl+0x5c/0xa0
dump_stack+0x14/0x1c
print_circular_bug+0x328/0x430
check_noncircular+0x124/0x134
__lock_acquire+0x12a0/0x2014
lock_acquire+0x100/0x2ac
down_write+0x4c/0x13c
led_trigger_register+0x4c/0x1a8
phy_led_triggers_register+0x9c/0x214
phy_attach_direct+0x154/0x36c
phylink_attach_phy+0x30/0x60
phylink_sfp_connect_phy+0x140/0x510
sfp_add_phy+0x34/0x50
init_module+0x15c/0xa7c [sfp]
cleanup_module+0x1d94/0x3120 [sfp]
cleanup_module+0x2bb4/0x3120 [sfp]
process_one_work+0x1f8/0x4ec
worker_thread+0x1e8/0x3d8
kthread+0x104/0x110
ret_from_fork+0x10/0x20
Signed-off-by: Daniel Golle <[email protected]>
Fixes: 01e5b72 ("net: phy: Add a binding for PHY LEDs")
Link: https://lore.kernel.org/r/102a9dce38bdf00215735d04cd4704458273ad9c.1702339354.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <[email protected]>
ammarfaizi2
pushed a commit
that referenced
this pull request
Dec 26, 2023
Trying to suspend to RAM on SAMA5D27 EVK leads to the following lockdep
warning:
============================================
WARNING: possible recursive locking detected
6.7.0-rc5-wt+ #532 Not tainted
--------------------------------------------
sh/92 is trying to acquire lock:
c3cf306c (&irq_desc_lock_class){-.-.}-{2:2}, at: __irq_get_desc_lock+0xe8/0x100
but task is already holding lock:
c3d7c46c (&irq_desc_lock_class){-.-.}-{2:2}, at: __irq_get_desc_lock+0xe8/0x100
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&irq_desc_lock_class);
lock(&irq_desc_lock_class);
*** DEADLOCK ***
May be due to missing lock nesting notation
6 locks held by sh/92:
#0: c3aa0258 (sb_writers#6){.+.+}-{0:0}, at: ksys_write+0xd8/0x178
#1: c4c2df44 (&of->mutex){+.+.}-{3:3}, at: kernfs_fop_write_iter+0x138/0x284
#2: c32684a0 (kn->active){.+.+}-{0:0}, at: kernfs_fop_write_iter+0x148/0x284
#3: c232b6d4 (system_transition_mutex){+.+.}-{3:3}, at: pm_suspend+0x13c/0x4e8
#4: c387b088 (&dev->mutex){....}-{3:3}, at: __device_suspend+0x1e8/0x91c
#5: c3d7c46c (&irq_desc_lock_class){-.-.}-{2:2}, at: __irq_get_desc_lock+0xe8/0x100
stack backtrace:
CPU: 0 PID: 92 Comm: sh Not tainted 6.7.0-rc5-wt+ #532
Hardware name: Atmel SAMA5
unwind_backtrace from show_stack+0x18/0x1c
show_stack from dump_stack_lvl+0x34/0x48
dump_stack_lvl from __lock_acquire+0x19ec/0x3a0c
__lock_acquire from lock_acquire.part.0+0x124/0x2d0
lock_acquire.part.0 from _raw_spin_lock_irqsave+0x5c/0x78
_raw_spin_lock_irqsave from __irq_get_desc_lock+0xe8/0x100
__irq_get_desc_lock from irq_set_irq_wake+0xa8/0x204
irq_set_irq_wake from atmel_gpio_irq_set_wake+0x58/0xb4
atmel_gpio_irq_set_wake from irq_set_irq_wake+0x100/0x204
irq_set_irq_wake from gpio_keys_suspend+0xec/0x2b8
gpio_keys_suspend from dpm_run_callback+0xe4/0x248
dpm_run_callback from __device_suspend+0x234/0x91c
__device_suspend from dpm_suspend+0x224/0x43c
dpm_suspend from dpm_suspend_start+0x9c/0xa8
dpm_suspend_start from suspend_devices_and_enter+0x1e0/0xa84
suspend_devices_and_enter from pm_suspend+0x460/0x4e8
pm_suspend from state_store+0x78/0xe4
state_store from kernfs_fop_write_iter+0x1a0/0x284
kernfs_fop_write_iter from vfs_write+0x38c/0x6f4
vfs_write from ksys_write+0xd8/0x178
ksys_write from ret_fast_syscall+0x0/0x1c
Exception stack(0xc52b3fa8 to 0xc52b3ff0)
3fa0: 00000004 005a0ae8 00000001 005a0ae8 00000004 00000001
3fc0: 00000004 005a0ae8 00000001 00000004 00000004 b6c616c0 00000020 0059d190
3fe0: 00000004 b6c61678 aec5a041 aebf1a26
This warning is raised because pinctrl-at91-pio4 uses chained IRQ. Whenever
a wake up source configures an IRQ through irq_set_irq_wake, it will
lock the corresponding IRQ desc, and then call irq_set_irq_wake on "parent"
IRQ which will do the same on its own IRQ desc, but since those two locks
share the same class, lockdep reports this as an issue.
Fix lockdep false positive by setting a different class for parent and
children IRQ
Fixes: 7761808 ("pinctrl: introduce driver for Atmel PIO4 controller")
Signed-off-by: Alexis Lothoré <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Linus Walleij <[email protected]>
ammarfaizi2
pushed a commit
that referenced
this pull request
Jan 15, 2024
[ Upstream commit 05bb016 ] ACPICA commit 770653e3ba67c30a629ca7d12e352d83c2541b1e Before this change we see the following UBSAN stack trace in Fuchsia: #0 0x000021e4213b3302 in acpi_ds_init_aml_walk(struct acpi_walk_state*, union acpi_parse_object*, struct acpi_namespace_node*, u8*, u32, struct acpi_evaluate_info*, u8) ../../third_party/acpica/source/components/dispatcher/dswstate.c:682 <platform-bus-x86.so>+0x233302 #1.2 0x000020d0f660777f in ubsan_get_stack_trace() compiler-rt/lib/ubsan/ubsan_diag.cpp:41 <libclang_rt.asan.so>+0x3d77f #1.1 0x000020d0f660777f in maybe_print_stack_trace() compiler-rt/lib/ubsan/ubsan_diag.cpp:51 <libclang_rt.asan.so>+0x3d77f #1 0x000020d0f660777f in ~scoped_report() compiler-rt/lib/ubsan/ubsan_diag.cpp:387 <libclang_rt.asan.so>+0x3d77f #2 0x000020d0f660b96d in handlepointer_overflow_impl() compiler-rt/lib/ubsan/ubsan_handlers.cpp:809 <libclang_rt.asan.so>+0x4196d #3 0x000020d0f660b50d in compiler-rt/lib/ubsan/ubsan_handlers.cpp:815 <libclang_rt.asan.so>+0x4150d #4 0x000021e4213b3302 in acpi_ds_init_aml_walk(struct acpi_walk_state*, union acpi_parse_object*, struct acpi_namespace_node*, u8*, u32, struct acpi_evaluate_info*, u8) ../../third_party/acpica/source/components/dispatcher/dswstate.c:682 <platform-bus-x86.so>+0x233302 #5 0x000021e4213e2369 in acpi_ds_call_control_method(struct acpi_thread_state*, struct acpi_walk_state*, union acpi_parse_object*) ../../third_party/acpica/source/components/dispatcher/dsmethod.c:605 <platform-bus-x86.so>+0x262369 #6 0x000021e421437fac in acpi_ps_parse_aml(struct acpi_walk_state*) ../../third_party/acpica/source/components/parser/psparse.c:550 <platform-bus-x86.so>+0x2b7fac #7 0x000021e4214464d2 in acpi_ps_execute_method(struct acpi_evaluate_info*) ../../third_party/acpica/source/components/parser/psxface.c:244 <platform-bus-x86.so>+0x2c64d2 #8 0x000021e4213aa052 in acpi_ns_evaluate(struct acpi_evaluate_info*) ../../third_party/acpica/source/components/namespace/nseval.c:250 <platform-bus-x86.so>+0x22a052 #9 0x000021e421413dd8 in acpi_ns_init_one_device(acpi_handle, u32, void*, void**) ../../third_party/acpica/source/components/namespace/nsinit.c:735 <platform-bus-x86.so>+0x293dd8 #10 0x000021e421429e98 in acpi_ns_walk_namespace(acpi_object_type, acpi_handle, u32, u32, acpi_walk_callback, acpi_walk_callback, void*, void**) ../../third_party/acpica/source/components/namespace/nswalk.c:298 <platform-bus-x86.so>+0x2a9e98 #11 0x000021e4214131ac in acpi_ns_initialize_devices(u32) ../../third_party/acpica/source/components/namespace/nsinit.c:268 <platform-bus-x86.so>+0x2931ac #12 0x000021e42147c40d in acpi_initialize_objects(u32) ../../third_party/acpica/source/components/utilities/utxfinit.c:304 <platform-bus-x86.so>+0x2fc40d #13 0x000021e42126d603 in acpi::acpi_impl::initialize_acpi(acpi::acpi_impl*) ../../src/devices/board/lib/acpi/acpi-impl.cc:224 <platform-bus-x86.so>+0xed603 Add a simple check that avoids incrementing a pointer by zero, but otherwise behaves as before. Note that our findings are against ACPICA 20221020, but the same code exists on master. Link: acpica/acpica@770653e3 Signed-off-by: Bob Moore <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
ammarfaizi2
pushed a commit
that referenced
this pull request
Jan 15, 2024
[ Upstream commit a154f5f ] The following call trace shows a deadlock issue due to recursive locking of mutex "device_mutex". First lock acquire is in target_for_each_device() and second in target_free_device(). PID: 148266 TASK: ffff8be21ffb5d00 CPU: 10 COMMAND: "iscsi_ttx" #0 [ffffa2bfc9ec3b18] __schedule at ffffffffa8060e7f #1 [ffffa2bfc9ec3ba0] schedule at ffffffffa8061224 #2 [ffffa2bfc9ec3bb8] schedule_preempt_disabled at ffffffffa80615ee #3 [ffffa2bfc9ec3bc8] __mutex_lock at ffffffffa8062fd7 #4 [ffffa2bfc9ec3c40] __mutex_lock_slowpath at ffffffffa80631d3 #5 [ffffa2bfc9ec3c50] mutex_lock at ffffffffa806320c #6 [ffffa2bfc9ec3c68] target_free_device at ffffffffc0935998 [target_core_mod] #7 [ffffa2bfc9ec3c90] target_core_dev_release at ffffffffc092f975 [target_core_mod] #8 [ffffa2bfc9ec3ca0] config_item_put at ffffffffa79d250f #9 [ffffa2bfc9ec3cd0] config_item_put at ffffffffa79d2583 #10 [ffffa2bfc9ec3ce0] target_devices_idr_iter at ffffffffc0933f3a [target_core_mod] #11 [ffffa2bfc9ec3d00] idr_for_each at ffffffffa803f6fc #12 [ffffa2bfc9ec3d60] target_for_each_device at ffffffffc0935670 [target_core_mod] #13 [ffffa2bfc9ec3d98] transport_deregister_session at ffffffffc0946408 [target_core_mod] #14 [ffffa2bfc9ec3dc8] iscsit_close_session at ffffffffc09a44a6 [iscsi_target_mod] #15 [ffffa2bfc9ec3df0] iscsit_close_connection at ffffffffc09a4a88 [iscsi_target_mod] #16 [ffffa2bfc9ec3df8] finish_task_switch at ffffffffa76e5d07 #17 [ffffa2bfc9ec3e78] iscsit_take_action_for_connection_exit at ffffffffc0991c23 [iscsi_target_mod] #18 [ffffa2bfc9ec3ea0] iscsi_target_tx_thread at ffffffffc09a403b [iscsi_target_mod] #19 [ffffa2bfc9ec3f08] kthread at ffffffffa76d8080 #20 [ffffa2bfc9ec3f50] ret_from_fork at ffffffffa8200364 Fixes: 36d4cb4 ("scsi: target: Avoid that EXTENDED COPY commands trigger lock inversion") Signed-off-by: Junxiao Bi <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Mike Christie <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
ammarfaizi2
pushed a commit
that referenced
this pull request
Jan 15, 2024
commit 5a22fbc upstream. When LAN9303 is MDIO-connected two callchains exist into mdio->bus->write(): 1. switch ports 1&2 ("physical" PHYs): virtual (switch-internal) MDIO bus (lan9303_switch_ops->phy_{read|write})-> lan9303_mdio_phy_{read|write} -> mdiobus_{read|write}_nested 2. LAN9303 virtual PHY: virtual MDIO bus (lan9303_phy_{read|write}) -> lan9303_virt_phy_reg_{read|write} -> regmap -> lan9303_mdio_{read|write} If the latter functions just take mutex_lock(&sw_dev->device->bus->mdio_lock) it triggers a LOCKDEP false-positive splat. It's false-positive because the first mdio_lock in the second callchain above belongs to virtual MDIO bus, the second mdio_lock belongs to physical MDIO bus. Consequent annotation in lan9303_mdio_{read|write} as nested lock (similar to lan9303_mdio_phy_{read|write}, it's the same physical MDIO bus) prevents the following splat: WARNING: possible circular locking dependency detected 5.15.71 #1 Not tainted ------------------------------------------------------ kworker/u4:3/609 is trying to acquire lock: ffff000011531c68 (lan9303_mdio:131:(&lan9303_mdio_regmap_config)->lock){+.+.}-{3:3}, at: regmap_lock_mutex but task is already holding lock: ffff0000114c44d8 (&bus->mdio_lock){+.+.}-{3:3}, at: mdiobus_read which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&bus->mdio_lock){+.+.}-{3:3}: lock_acquire __mutex_lock mutex_lock_nested lan9303_mdio_read _regmap_read regmap_read lan9303_probe lan9303_mdio_probe mdio_probe really_probe __driver_probe_device driver_probe_device __device_attach_driver bus_for_each_drv __device_attach device_initial_probe bus_probe_device deferred_probe_work_func process_one_work worker_thread kthread ret_from_fork -> #0 (lan9303_mdio:131:(&lan9303_mdio_regmap_config)->lock){+.+.}-{3:3}: __lock_acquire lock_acquire.part.0 lock_acquire __mutex_lock mutex_lock_nested regmap_lock_mutex regmap_read lan9303_phy_read dsa_slave_phy_read __mdiobus_read mdiobus_read get_phy_device mdiobus_scan __mdiobus_register dsa_register_switch lan9303_probe lan9303_mdio_probe mdio_probe really_probe __driver_probe_device driver_probe_device __device_attach_driver bus_for_each_drv __device_attach device_initial_probe bus_probe_device deferred_probe_work_func process_one_work worker_thread kthread ret_from_fork other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&bus->mdio_lock); lock(lan9303_mdio:131:(&lan9303_mdio_regmap_config)->lock); lock(&bus->mdio_lock); lock(lan9303_mdio:131:(&lan9303_mdio_regmap_config)->lock); *** DEADLOCK *** 5 locks held by kworker/u4:3/609: #0: ffff000002842938 ((wq_completion)events_unbound){+.+.}-{0:0}, at: process_one_work #1: ffff80000bacbd60 (deferred_probe_work){+.+.}-{0:0}, at: process_one_work #2: ffff000007645178 (&dev->mutex){....}-{3:3}, at: __device_attach #3: ffff8000096e6e78 (dsa2_mutex){+.+.}-{3:3}, at: dsa_register_switch #4: ffff0000114c44d8 (&bus->mdio_lock){+.+.}-{3:3}, at: mdiobus_read stack backtrace: CPU: 1 PID: 609 Comm: kworker/u4:3 Not tainted 5.15.71 #1 Workqueue: events_unbound deferred_probe_work_func Call trace: dump_backtrace show_stack dump_stack_lvl dump_stack print_circular_bug check_noncircular __lock_acquire lock_acquire.part.0 lock_acquire __mutex_lock mutex_lock_nested regmap_lock_mutex regmap_read lan9303_phy_read dsa_slave_phy_read __mdiobus_read mdiobus_read get_phy_device mdiobus_scan __mdiobus_register dsa_register_switch lan9303_probe lan9303_mdio_probe ... Cc: [email protected] Fixes: dc70058 ("net: dsa: LAN9303: add MDIO managed mode support") Signed-off-by: Alexander Sverdlin <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
ammarfaizi2
pushed a commit
that referenced
this pull request
Jan 15, 2024
[ Upstream commit 1469417 ] Trying to suspend to RAM on SAMA5D27 EVK leads to the following lockdep warning: ============================================ WARNING: possible recursive locking detected 6.7.0-rc5-wt+ #532 Not tainted -------------------------------------------- sh/92 is trying to acquire lock: c3cf306c (&irq_desc_lock_class){-.-.}-{2:2}, at: __irq_get_desc_lock+0xe8/0x100 but task is already holding lock: c3d7c46c (&irq_desc_lock_class){-.-.}-{2:2}, at: __irq_get_desc_lock+0xe8/0x100 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&irq_desc_lock_class); lock(&irq_desc_lock_class); *** DEADLOCK *** May be due to missing lock nesting notation 6 locks held by sh/92: #0: c3aa0258 (sb_writers#6){.+.+}-{0:0}, at: ksys_write+0xd8/0x178 #1: c4c2df44 (&of->mutex){+.+.}-{3:3}, at: kernfs_fop_write_iter+0x138/0x284 #2: c32684a0 (kn->active){.+.+}-{0:0}, at: kernfs_fop_write_iter+0x148/0x284 #3: c232b6d4 (system_transition_mutex){+.+.}-{3:3}, at: pm_suspend+0x13c/0x4e8 #4: c387b088 (&dev->mutex){....}-{3:3}, at: __device_suspend+0x1e8/0x91c #5: c3d7c46c (&irq_desc_lock_class){-.-.}-{2:2}, at: __irq_get_desc_lock+0xe8/0x100 stack backtrace: CPU: 0 PID: 92 Comm: sh Not tainted 6.7.0-rc5-wt+ #532 Hardware name: Atmel SAMA5 unwind_backtrace from show_stack+0x18/0x1c show_stack from dump_stack_lvl+0x34/0x48 dump_stack_lvl from __lock_acquire+0x19ec/0x3a0c __lock_acquire from lock_acquire.part.0+0x124/0x2d0 lock_acquire.part.0 from _raw_spin_lock_irqsave+0x5c/0x78 _raw_spin_lock_irqsave from __irq_get_desc_lock+0xe8/0x100 __irq_get_desc_lock from irq_set_irq_wake+0xa8/0x204 irq_set_irq_wake from atmel_gpio_irq_set_wake+0x58/0xb4 atmel_gpio_irq_set_wake from irq_set_irq_wake+0x100/0x204 irq_set_irq_wake from gpio_keys_suspend+0xec/0x2b8 gpio_keys_suspend from dpm_run_callback+0xe4/0x248 dpm_run_callback from __device_suspend+0x234/0x91c __device_suspend from dpm_suspend+0x224/0x43c dpm_suspend from dpm_suspend_start+0x9c/0xa8 dpm_suspend_start from suspend_devices_and_enter+0x1e0/0xa84 suspend_devices_and_enter from pm_suspend+0x460/0x4e8 pm_suspend from state_store+0x78/0xe4 state_store from kernfs_fop_write_iter+0x1a0/0x284 kernfs_fop_write_iter from vfs_write+0x38c/0x6f4 vfs_write from ksys_write+0xd8/0x178 ksys_write from ret_fast_syscall+0x0/0x1c Exception stack(0xc52b3fa8 to 0xc52b3ff0) 3fa0: 00000004 005a0ae8 00000001 005a0ae8 00000004 00000001 3fc0: 00000004 005a0ae8 00000001 00000004 00000004 b6c616c0 00000020 0059d190 3fe0: 00000004 b6c61678 aec5a041 aebf1a26 This warning is raised because pinctrl-at91-pio4 uses chained IRQ. Whenever a wake up source configures an IRQ through irq_set_irq_wake, it will lock the corresponding IRQ desc, and then call irq_set_irq_wake on "parent" IRQ which will do the same on its own IRQ desc, but since those two locks share the same class, lockdep reports this as an issue. Fix lockdep false positive by setting a different class for parent and children IRQ Fixes: 7761808 ("pinctrl: introduce driver for Atmel PIO4 controller") Signed-off-by: Alexis Lothoré <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Linus Walleij <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
ammarfaizi2
pushed a commit
that referenced
this pull request
Jan 18, 2024
The variable rmnet_link_ops assign a *bigger* maxtype which leads to a global out-of-bounds read when parsing the netlink attributes. See bug trace below: ================================================================== BUG: KASAN: global-out-of-bounds in validate_nla lib/nlattr.c:386 [inline] BUG: KASAN: global-out-of-bounds in __nla_validate_parse+0x24af/0x2750 lib/nlattr.c:600 Read of size 1 at addr ffffffff92c438d0 by task syz-executor.6/84207 CPU: 0 PID: 84207 Comm: syz-executor.6 Tainted: G N 6.1.0 #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x8b/0xb3 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:284 [inline] print_report+0x172/0x475 mm/kasan/report.c:395 kasan_report+0xbb/0x1c0 mm/kasan/report.c:495 validate_nla lib/nlattr.c:386 [inline] __nla_validate_parse+0x24af/0x2750 lib/nlattr.c:600 __nla_parse+0x3e/0x50 lib/nlattr.c:697 nla_parse_nested_deprecated include/net/netlink.h:1248 [inline] __rtnl_newlink+0x50a/0x1880 net/core/rtnetlink.c:3485 rtnl_newlink+0x64/0xa0 net/core/rtnetlink.c:3594 rtnetlink_rcv_msg+0x43c/0xd70 net/core/rtnetlink.c:6091 netlink_rcv_skb+0x14f/0x410 net/netlink/af_netlink.c:2540 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline] netlink_unicast+0x54e/0x800 net/netlink/af_netlink.c:1345 netlink_sendmsg+0x930/0xe50 net/netlink/af_netlink.c:1921 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg+0x154/0x190 net/socket.c:734 ____sys_sendmsg+0x6df/0x840 net/socket.c:2482 ___sys_sendmsg+0x110/0x1b0 net/socket.c:2536 __sys_sendmsg+0xf3/0x1c0 net/socket.c:2565 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7fdcf2072359 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 f1 19 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fdcf13e3168 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007fdcf219ff80 RCX: 00007fdcf2072359 RDX: 0000000000000000 RSI: 0000000020000200 RDI: 0000000000000003 RBP: 00007fdcf20bd493 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007fffbb8d7bdf R14: 00007fdcf13e3300 R15: 0000000000022000 </TASK> The buggy address belongs to the variable: rmnet_policy+0x30/0xe0 The buggy address belongs to the physical page: page:0000000065bdeb3c refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x155243 flags: 0x200000000001000(reserved|node=0|zone=2) raw: 0200000000001000 ffffea00055490c8 ffffea00055490c8 0000000000000000 raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffffffff92c43780: f9 f9 f9 f9 00 00 00 02 f9 f9 f9 f9 00 00 00 07 ffffffff92c43800: f9 f9 f9 f9 00 00 00 05 f9 f9 f9 f9 06 f9 f9 f9 >ffffffff92c43880: f9 f9 f9 f9 00 00 00 00 00 00 f9 f9 f9 f9 f9 f9 ^ ffffffff92c43900: 00 00 00 00 00 00 00 00 07 f9 f9 f9 f9 f9 f9 f9 ffffffff92c43980: 00 00 00 07 f9 f9 f9 f9 00 00 00 05 f9 f9 f9 f9 According to the comment of `nla_parse_nested_deprecated`, the maxtype should be len(destination array) - 1. Hence use `IFLA_RMNET_MAX` here. Fixes: 14452ca ("net: qualcomm: rmnet: Export mux_id and flags to netlink") Signed-off-by: Lin Ma <[email protected]> Reviewed-by: Subash Abhinov Kasiviswanathan <[email protected]> Reviewed-by: Simon Horman <[email protected]> Reviewed-by: Jiri Pirko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
ammarfaizi2
pushed a commit
that referenced
this pull request
Jan 18, 2024
Andrii Nakryiko says: ==================== Tighten up arg:ctx type enforcement Follow up fixes for kernel-side and libbpf-side logic around handling arg:ctx (__arg_ctx) tagged arguments of BPF global subprogs. Patch #1 adds libbpf feature detection of kernel-side __arg_ctx support to avoid unnecessary rewriting BTF types. With stricter kernel-side type enforcement this is now mandatory to avoid problems with using `struct bpf_user_pt_regs_t` instead of actual typedef. For __arg_ctx tagged arguments verifier is now supporting either `bpf_user_pt_regs_t` typedef or resolves it down to the actual struct (pt_regs/user_pt_regs/user_regs_struct), depending on architecture), but for old kernels without __arg_ctx support it's more backwards compatible for libbpf to use `struct bpf_user_pt_regs_t` rewrite which will work on wider range of kernels. So feature detection prevent libbpf accidentally breaking global subprogs on new kernels. We also adjust selftests to do similar feature detection (much simpler, but potentially breaking due to kernel source code refactoring, which is fine for selftests), and skip tests expecting libbpf's BTF type rewrites. Patch #2 is preparatory refactoring for patch #3 which adds type enforcement for arg:ctx tagged global subprog args. See the patch for specifics. Patch #4 adds many new cases to ensure type logic works as expected. Finally, patch #5 adds a relevant subset of kernel-side type checks to __arg_ctx cases that libbpf supports rewrite of. In libbpf's case, type violations are reported as warnings and BTF rewrite is not performed, which will eventually lead to BPF verifier complaining at program verification time. Good care was taken to avoid conflicts between bpf and bpf-next tree (which has few follow up refactorings in the same code area). Once trees converge some of the code will be moved around a bit (and some will be deleted), but with no change to functionality or general shape of the code. v2->v3: - support `bpf_user_pt_regs_t` typedef for KPROBE and PERF_EVENT (CI); v1->v2: - add user_pt_regs and user_regs_struct support for PERF_EVENT (CI); - drop FEAT_ARG_CTX_TAG enum leftover from patch #1; - fix warning about default: without break in the switch (CI). ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
ammarfaizi2
pushed a commit
that referenced
this pull request
Jan 18, 2024
Petr Machata says: ==================== mlxsw: Miscellaneous fixes This patchset is a bric-a-brac of fixes for bugs impacting mlxsw. - Patches #1 and #2 fix issues in ACL handling error paths. - Patch #3 fixes stack corruption in ACL code that a recent FW update has uncovered. - Patch #4 fixes an issue in handling of IPIP next hops. - Patch #5 fixes a typo in a the qos_pfc selftest - Patch #6 fixes the same selftest to work with 8-lane ports. ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
ammarfaizi2
pushed a commit
that referenced
this pull request
Jan 23, 2024
commit ca25c00 upstream. A failure loading the safexcel driver results in the following warning on boot, because the IRQ affinity has not been correctly cleaned up. Ensure we clean up the affinity and workqueues on a failure to load the driver. crypto-safexcel: probe of f2800000.crypto failed with error -2 ------------[ cut here ]------------ WARNING: CPU: 1 PID: 232 at kernel/irq/manage.c:1913 free_irq+0x300/0x340 Modules linked in: hwmon mdio_i2c crypto_safexcel(+) md5 sha256_generic libsha256 authenc libdes omap_rng rng_core nft_masq nft_nat nft_chain_nat nf_nat nft_ct nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nf_tables libcrc32c nfnetlink fuse autofs4 CPU: 1 PID: 232 Comm: systemd-udevd Tainted: G W 6.1.6-00002-g9d4898824677 #3 Hardware name: MikroTik RB5009 (DT) pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : free_irq+0x300/0x340 lr : free_irq+0x2e0/0x340 sp : ffff800008fa3890 x29: ffff800008fa3890 x28: 0000000000000000 x27: 0000000000000000 x26: ffff8000008e6dc0 x25: ffff000009034cac x24: ffff000009034d50 x23: 0000000000000000 x22: 000000000000004a x21: ffff0000093e0d80 x20: ffff000009034c00 x19: ffff00000615fc00 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 000075f5c1584c5e x14: 0000000000000017 x13: 0000000000000000 x12: 0000000000000040 x11: ffff000000579b60 x10: ffff000000579b62 x9 : ffff800008bbe370 x8 : ffff000000579dd0 x7 : 0000000000000000 x6 : ffff000000579e18 x5 : ffff000000579da8 x4 : ffff800008ca0000 x3 : ffff800008ca0188 x2 : 0000000013033204 x1 : ffff000009034c00 x0 : ffff8000087eadf0 Call trace: free_irq+0x300/0x340 devm_irq_release+0x14/0x20 devres_release_all+0xa0/0x100 device_unbind_cleanup+0x14/0x60 really_probe+0x198/0x2d4 __driver_probe_device+0x74/0xdc driver_probe_device+0x3c/0x110 __driver_attach+0x8c/0x190 bus_for_each_dev+0x6c/0xc0 driver_attach+0x20/0x30 bus_add_driver+0x148/0x1fc driver_register+0x74/0x120 __platform_driver_register+0x24/0x30 safexcel_init+0x48/0x1000 [crypto_safexcel] do_one_initcall+0x4c/0x1b0 do_init_module+0x44/0x1cc load_module+0x1724/0x1be4 __do_sys_finit_module+0xbc/0x110 __arm64_sys_finit_module+0x1c/0x24 invoke_syscall+0x44/0x110 el0_svc_common.constprop.0+0xc0/0xe0 do_el0_svc+0x20/0x80 el0_svc+0x14/0x4c el0t_64_sync_handler+0xb0/0xb4 el0t_64_sync+0x148/0x14c ---[ end trace 0000000000000000 ]--- Fixes: 1b44c5a ("inside-secure - add SafeXcel EIP197 crypto engine driver") Signed-off-by: Jonathan McDowell <[email protected]> Cc: [email protected] Signed-off-by: Herbert Xu <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
ammarfaizi2
pushed a commit
that referenced
this pull request
Jan 23, 2024
[ Upstream commit cba6cfd ] An automated bot told me that there was a potential lockdep problem with regulators. This was on the chromeos-5.15 kernel, but I see nothing that would be different downstream compared to upstream. The bot said: ============================================ WARNING: possible recursive locking detected 5.15.104-lockdep-17461-gc1e499ed6604 #1 Not tainted -------------------------------------------- kworker/u16:4/115 is trying to acquire lock: ffffff8083110170 (regulator_ww_class_mutex){+.+.}-{3:3}, at: create_regulator+0x398/0x7ec but task is already holding lock: ffffff808378e170 (regulator_ww_class_mutex){+.+.}-{3:3}, at: ww_mutex_trylock+0x3c/0x7b8 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(regulator_ww_class_mutex); lock(regulator_ww_class_mutex); *** DEADLOCK *** May be due to missing lock nesting notation 4 locks held by kworker/u16:4/115: #0: ffffff808006a948 ((wq_completion)events_unbound){+.+.}-{0:0}, at: process_one_work+0x520/0x1348 #1: ffffffc00e0a7cc0 ((work_completion)(&entry->work)){+.+.}-{0:0}, at: process_one_work+0x55c/0x1348 #2: ffffff80828a2260 (&dev->mutex){....}-{3:3}, at: __device_attach_async_helper+0xd0/0x2a4 #3: ffffff808378e170 (regulator_ww_class_mutex){+.+.}-{3:3}, at: ww_mutex_trylock+0x3c/0x7b8 stack backtrace: CPU: 2 PID: 115 Comm: kworker/u16:4 Not tainted 5.15.104-lockdep-17461-gc1e499ed6604 #1 9292e52fa83c0e23762b2b3aa1bacf5787a4d5da Hardware name: Google Quackingstick (rev0+) (DT) Workqueue: events_unbound async_run_entry_fn Call trace: dump_backtrace+0x0/0x4ec show_stack+0x34/0x50 dump_stack_lvl+0xdc/0x11c dump_stack+0x1c/0x48 __lock_acquire+0x16d4/0x6c74 lock_acquire+0x208/0x750 __mutex_lock_common+0x11c/0x11f8 ww_mutex_lock+0xc0/0x440 create_regulator+0x398/0x7ec regulator_resolve_supply+0x654/0x7c4 regulator_register_resolve_supply+0x30/0x120 class_for_each_device+0x1b8/0x230 regulator_register+0x17a4/0x1f40 devm_regulator_register+0x60/0xd0 reg_fixed_voltage_probe+0x728/0xaec platform_probe+0x150/0x1c8 really_probe+0x274/0xa20 __driver_probe_device+0x1dc/0x3f4 driver_probe_device+0x78/0x1c0 __device_attach_driver+0x1ac/0x2c8 bus_for_each_drv+0x11c/0x190 __device_attach_async_helper+0x1e4/0x2a4 async_run_entry_fn+0xa0/0x3ac process_one_work+0x638/0x1348 worker_thread+0x4a8/0x9c4 kthread+0x2e4/0x3a0 ret_from_fork+0x10/0x20 The problem was first reported soon after we made many of the regulators probe asynchronously, though nothing I've seen implies that the problems couldn't have also happened even without that. I haven't personally been able to reproduce the lockdep issue, but the issue does look somewhat legitimate. Specifically, it looks like in regulator_resolve_supply() we are holding a "rdev" lock while calling set_supply() -> create_regulator() which grabs the lock of a _different_ "rdev" (the one for our supply). This is not necessarily safe from a lockdep perspective since there is no documented ordering between these two locks. In reality, we should always be locking a regulator before the supplying regulator, so I don't expect there to be any real deadlocks in practice. However, the regulator framework in general doesn't express this to lockdep. Let's fix the issue by simply grabbing the two locks involved in the same way we grab multiple locks elsewhere in the regulator framework: using the "wound/wait" mechanisms. Fixes: eaa7995 ("regulator: core: avoid regulator_resolve_supply() race condition") Signed-off-by: Douglas Anderson <[email protected]> Link: https://lore.kernel.org/r/20230329143317.RFC.v2.2.I30d8e1ca10cfbe5403884cdd192253a2e063eb9e@changeid Signed-off-by: Mark Brown <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
ammarfaizi2
pushed a commit
that referenced
this pull request
Jan 23, 2024
[ Upstream commit 05bb016 ] ACPICA commit 770653e3ba67c30a629ca7d12e352d83c2541b1e Before this change we see the following UBSAN stack trace in Fuchsia: #0 0x000021e4213b3302 in acpi_ds_init_aml_walk(struct acpi_walk_state*, union acpi_parse_object*, struct acpi_namespace_node*, u8*, u32, struct acpi_evaluate_info*, u8) ../../third_party/acpica/source/components/dispatcher/dswstate.c:682 <platform-bus-x86.so>+0x233302 #1.2 0x000020d0f660777f in ubsan_get_stack_trace() compiler-rt/lib/ubsan/ubsan_diag.cpp:41 <libclang_rt.asan.so>+0x3d77f #1.1 0x000020d0f660777f in maybe_print_stack_trace() compiler-rt/lib/ubsan/ubsan_diag.cpp:51 <libclang_rt.asan.so>+0x3d77f #1 0x000020d0f660777f in ~scoped_report() compiler-rt/lib/ubsan/ubsan_diag.cpp:387 <libclang_rt.asan.so>+0x3d77f #2 0x000020d0f660b96d in handlepointer_overflow_impl() compiler-rt/lib/ubsan/ubsan_handlers.cpp:809 <libclang_rt.asan.so>+0x4196d #3 0x000020d0f660b50d in compiler-rt/lib/ubsan/ubsan_handlers.cpp:815 <libclang_rt.asan.so>+0x4150d #4 0x000021e4213b3302 in acpi_ds_init_aml_walk(struct acpi_walk_state*, union acpi_parse_object*, struct acpi_namespace_node*, u8*, u32, struct acpi_evaluate_info*, u8) ../../third_party/acpica/source/components/dispatcher/dswstate.c:682 <platform-bus-x86.so>+0x233302 #5 0x000021e4213e2369 in acpi_ds_call_control_method(struct acpi_thread_state*, struct acpi_walk_state*, union acpi_parse_object*) ../../third_party/acpica/source/components/dispatcher/dsmethod.c:605 <platform-bus-x86.so>+0x262369 #6 0x000021e421437fac in acpi_ps_parse_aml(struct acpi_walk_state*) ../../third_party/acpica/source/components/parser/psparse.c:550 <platform-bus-x86.so>+0x2b7fac #7 0x000021e4214464d2 in acpi_ps_execute_method(struct acpi_evaluate_info*) ../../third_party/acpica/source/components/parser/psxface.c:244 <platform-bus-x86.so>+0x2c64d2 #8 0x000021e4213aa052 in acpi_ns_evaluate(struct acpi_evaluate_info*) ../../third_party/acpica/source/components/namespace/nseval.c:250 <platform-bus-x86.so>+0x22a052 #9 0x000021e421413dd8 in acpi_ns_init_one_device(acpi_handle, u32, void*, void**) ../../third_party/acpica/source/components/namespace/nsinit.c:735 <platform-bus-x86.so>+0x293dd8 #10 0x000021e421429e98 in acpi_ns_walk_namespace(acpi_object_type, acpi_handle, u32, u32, acpi_walk_callback, acpi_walk_callback, void*, void**) ../../third_party/acpica/source/components/namespace/nswalk.c:298 <platform-bus-x86.so>+0x2a9e98 #11 0x000021e4214131ac in acpi_ns_initialize_devices(u32) ../../third_party/acpica/source/components/namespace/nsinit.c:268 <platform-bus-x86.so>+0x2931ac #12 0x000021e42147c40d in acpi_initialize_objects(u32) ../../third_party/acpica/source/components/utilities/utxfinit.c:304 <platform-bus-x86.so>+0x2fc40d #13 0x000021e42126d603 in acpi::acpi_impl::initialize_acpi(acpi::acpi_impl*) ../../src/devices/board/lib/acpi/acpi-impl.cc:224 <platform-bus-x86.so>+0xed603 Add a simple check that avoids incrementing a pointer by zero, but otherwise behaves as before. Note that our findings are against ACPICA 20221020, but the same code exists on master. Link: acpica/acpica@770653e3 Signed-off-by: Bob Moore <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
ammarfaizi2
pushed a commit
that referenced
this pull request
Jan 23, 2024
commit 614ce6a upstream. When the dwc3 device is runtime suspended, various required clocks are in disabled state and it is not guaranteed that access to any registers would work. Depending on the SoC glue, a register read could be as benign as returning 0 or be fatal enough to hang the system. In order to prevent such scenarios of fatal errors, make sure to resume dwc3 then allow the function to proceed. Fixes: 72246da ("usb: Introduce DesignWare USB3 DRD Driver") Cc: [email protected] #3.2: 30332ee: debugfs: regset32: Add Runtime PM support Signed-off-by: Udipto Goswami <[email protected]> Reviewed-by: Johan Hovold <[email protected]> Tested-by: Johan Hovold <[email protected]> Acked-by: Thinh Nguyen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
ammarfaizi2
pushed a commit
that referenced
this pull request
Jan 23, 2024
…d_lock() deadlock" In commit 7e9fc61 ("Merge 5.10.143 into android13-5.10-lts") the fix dee1e2b ("cgroup: Fix threadgroup_rwsem <-> cpus_read_lock() deadlock") was merged in. However, it seems like the merge went awry and undid the critical locking fix in cpuset_attach(). This causes lockdep to give the following splat: [ 35.132948] ============================================ [ 35.132951] WARNING: possible recursive locking detected [ 35.132957] 5.10.157-android13-4-00001-g87c7751c5c84-dirty #1 Tainted: G OE [ 35.132959] -------------------------------------------- [ 35.132963] init/400 is trying to acquire lock: [ 35.132968] ffffffe936b8c0f0 (cpu_hotplug_lock){++++}-{0:0}, at: cpuset_attach+0x54/0x30c [ 35.132994] but task is already holding lock: [ 35.132997] ffffffe936b8c0f0 (cpu_hotplug_lock){++++}-{0:0}, at: cgroup_procs_write_start+0x98/0x28c [ 35.133016] other info that might help us debug this: [ 35.133018] Possible unsafe locking scenario: [ 35.133021] CPU0 [ 35.133024] ---- [ 35.133026] lock(cpu_hotplug_lock); [ 35.133033] lock(cpu_hotplug_lock); [ 35.133040] *** DEADLOCK *** [ 35.133042] May be due to missing lock nesting notation [ 35.133046] 5 locks held by init/400: [ 35.133049] #0: ffffff880700a490 (sb_writers#9){.+.+}-{0:0}, at: vfs_write+0xc8/0x358 [ 35.133073] #1: ffffff8804fdbc88 (&of->mutex){+.+.}-{4:4}, at: kernfs_fop_write_iter+0xc8/0x200 [ 35.133093] #2: ffffffe936c15488 (cgroup_mutex){+.+.}-{4:4}, at: cgroup_kn_lock_live+0x80/0xe8 [ 35.133112] #3: ffffffe936b8c0f0 (cpu_hotplug_lock){++++}-{0:0}, at: cgroup_procs_write_start+0x98/0x28c [ 35.133128] #4: ffffffe936c15610 (cgroup_threadgroup_rwsem){++++}-{0:0}, at: cgroup_procs_write_start+0xa8/0x28c [ 35.133149] stack backtrace: [ 35.133155] CPU: 3 PID: 400 Comm: init Tainted: G OE 5.10.157-android13-4-00001-g87c7751c5c84-dirty #1 [ 35.133159] Hardware name: Oriole DVT (DT) [ 35.133162] Call trace: [ 35.133171] dump_backtrace.cfi_jt+0x0/0x8 [ 35.133178] show_stack+0x1c/0x2c [ 35.133186] dump_stack_lvl+0xe0/0x17c [ 35.133193] __lock_acquire+0x5e4/0x2fb4 [ 35.133197] lock_acquire+0x100/0x210 [ 35.133205] cpus_read_lock+0x7c/0x1b0 [ 35.133210] cpuset_attach+0x54/0x30c [ 35.133215] cgroup_migrate_execute+0x2e4/0x568 [ 35.133221] cgroup_migrate+0x104/0x120 [ 35.133226] cgroup_attach_task+0x204/0x2b8 [ 35.133233] __cgroup1_procs_write+0x104/0x1bc [ 35.133239] cgroup1_procs_write+0x18/0x28 [ 35.133243] cgroup_file_write+0xac/0x308 [ 35.133248] kernfs_fop_write_iter+0x134/0x200 [ 35.133252] vfs_write+0x2e4/0x358 [ 35.133256] ksys_write+0x7c/0xec [ 35.133261] __arm64_sys_write+0x20/0x30 [ 35.133269] el0_svc_common.llvm.12320387402837011898+0xd4/0x1ec [ 35.133273] do_el0_svc+0x28/0xa0 [ 35.133280] el0_svc+0x24/0x38 [ 35.133285] el0_sync_handler+0x88/0xec [ 35.133292] el0_sync+0x1b4/0x1c0 So this patch tries to fix that merge by including the dropped changes. Original upstream commit: 4f7e723 Cc: Greg Kroah-Hartman <[email protected]> Bug: 287147292 Fixes: f5094ec ("Merge 5.10.150 into android13-5.10-lts") Signed-off-by: John Stultz <[email protected]> Change-Id: Iaadcdc76ed9470bf02e352a5ea8b0f254a1df976
ammarfaizi2
pushed a commit
that referenced
this pull request
Apr 26, 2024
As for ice bug fixed by commit b7306b4 ("ice: manage interrupts during poll exit") followed by commit 23be707 ("ice: fix software generating extra interrupts") I'm seeing the similar issue also with i40e driver. In certain situation when busy-loop is enabled together with adaptive coalescing, the driver occasionally misses that there are outstanding descriptors to clean when exiting busy poll. Try to catch the remaining work by triggering a software interrupt when exiting busy poll. No extra interrupts will be generated when busy polling is not used. The issue was found when running sockperf ping-pong tcp test with adaptive coalescing and busy poll enabled (50 as value busy_pool and busy_read sysctl knobs) and results in huge latency spikes with more than 100000us. The fix is inspired from the ice driver and do the following: 1) During napi poll exit in case of busy-poll (napo_complete_done() returns false) this is recorded to q_vector that we were in busy loop. 2) Extends i40e_buildreg_itr() to be able to add an enforced software interrupt into built value 2) In i40e_update_enable_itr() enforces a software interrupt trigger if we are exiting busy poll to catch any pending clean-ups 3) Reuses unused 3rd ITR (interrupt throttle) index and set it to 20K interrupts per second to limit the number of these sw interrupts. Test results ============ Prior: [root@dell-per640-07 net]# sockperf ping-pong -i 10.9.9.1 --tcp -m 1000 --mps=max -t 120 sockperf: == version #3.10-no.git == sockperf[CLIENT] send on:sockperf: using recvfrom() to block on socket(s) [ 0] IP = 10.9.9.1 PORT = 11111 # TCP sockperf: Warmup stage (sending a few dummy messages)... sockperf: Starting test... sockperf: Test end (interrupted by timer) sockperf: Test ended sockperf: [Total Run] RunTime=119.999 sec; Warm up time=400 msec; SentMessages=2438563; ReceivedMessages=2438562 sockperf: ========= Printing statistics for Server No: 0 sockperf: [Valid Duration] RunTime=119.549 sec; SentMessages=2429473; ReceivedMessages=2429473 sockperf: ====> avg-latency=24.571 (std-dev=93.297, mean-ad=4.904, median-ad=1.510, siqr=1.063, cv=3.797, std-error=0.060, 99.0% ci=[24.417, 24.725]) sockperf: # dropped messages = 0; # duplicated messages = 0; # out-of-order messages = 0 sockperf: Summary: Latency is 24.571 usec sockperf: Total 2429473 observations; each percentile contains 24294.73 observations sockperf: ---> <MAX> observation = 103294.331 sockperf: ---> percentile 99.999 = 45.633 sockperf: ---> percentile 99.990 = 37.013 sockperf: ---> percentile 99.900 = 35.910 sockperf: ---> percentile 99.000 = 33.390 sockperf: ---> percentile 90.000 = 28.626 sockperf: ---> percentile 75.000 = 27.741 sockperf: ---> percentile 50.000 = 26.743 sockperf: ---> percentile 25.000 = 25.614 sockperf: ---> <MIN> observation = 12.220 After: [root@dell-per640-07 net]# sockperf ping-pong -i 10.9.9.1 --tcp -m 1000 --mps=max -t 120 sockperf: == version #3.10-no.git == sockperf[CLIENT] send on:sockperf: using recvfrom() to block on socket(s) [ 0] IP = 10.9.9.1 PORT = 11111 # TCP sockperf: Warmup stage (sending a few dummy messages)... sockperf: Starting test... sockperf: Test end (interrupted by timer) sockperf: Test ended sockperf: [Total Run] RunTime=119.999 sec; Warm up time=400 msec; SentMessages=2400055; ReceivedMessages=2400054 sockperf: ========= Printing statistics for Server No: 0 sockperf: [Valid Duration] RunTime=119.549 sec; SentMessages=2391186; ReceivedMessages=2391186 sockperf: ====> avg-latency=24.965 (std-dev=5.934, mean-ad=4.642, median-ad=1.485, siqr=1.067, cv=0.238, std-error=0.004, 99.0% ci=[24.955, 24.975]) sockperf: # dropped messages = 0; # duplicated messages = 0; # out-of-order messages = 0 sockperf: Summary: Latency is 24.965 usec sockperf: Total 2391186 observations; each percentile contains 23911.86 observations sockperf: ---> <MAX> observation = 195.841 sockperf: ---> percentile 99.999 = 45.026 sockperf: ---> percentile 99.990 = 39.009 sockperf: ---> percentile 99.900 = 35.922 sockperf: ---> percentile 99.000 = 33.482 sockperf: ---> percentile 90.000 = 28.902 sockperf: ---> percentile 75.000 = 27.821 sockperf: ---> percentile 50.000 = 26.860 sockperf: ---> percentile 25.000 = 25.685 sockperf: ---> <MIN> observation = 12.277 Fixes: 0bcd952 ("ethernet/intel: consolidate NAPI and NAPI exit") Reported-by: Hugo Ferreira <[email protected]> Reviewed-by: Michal Schmidt <[email protected]> Signed-off-by: Ivan Vecera <[email protected]> Reviewed-by: Jesse Brandeburg <[email protected]> Tested-by: Pucha Himasekhar Reddy <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]>
ammarfaizi2
pushed a commit
that referenced
this pull request
Apr 26, 2024
At current x1e80100 interface table, interface #3 is wrongly connected to DP controller #0 and interface #4 wrongly connected to DP controller #2. Fix this problem by connect Interface #3 to DP controller #0 and interface #4 connect to DP controller #1. Also add interface #6, #7 and #8 connections to DP controller to complete x1e80100 interface table. Changs in V3: -- add v2 changes log Changs in V2: -- add x1e80100 to subject -- add Fixes Fixes: e3b1f36 ("drm/msm/dpu: Add X1E80100 support") Signed-off-by: Kuogee Hsieh <[email protected]> Reviewed-by: Abhinav Kumar <[email protected]> Reviewed-by: Abel Vesa <[email protected]> Patchwork: https://patchwork.freedesktop.org/patch/585549/ Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Abhinav Kumar <[email protected]>
ammarfaizi2
pushed a commit
that referenced
this pull request
Apr 26, 2024
…git/netfilter/nf Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: Patch #1 unlike early commit path stage which triggers a call to abort, an explicit release of the batch is required on abort, otherwise mutex is released and commit_list remains in place. Patch #2 release mutex after nft_gc_seq_end() in commit path, otherwise async GC worker could collect expired objects. Patch #3 flush pending destroy work in module removal path, otherwise UaF is possible. Patch #4 and #6 restrict the table dormant flag with basechain updates to fix state inconsistency in the hook registration. Patch #5 adds missing RCU read side lock to flowtable type to avoid races with module removal. * tag 'nf-24-04-04' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: nf_tables: discard table flag update with pending basechain deletion netfilter: nf_tables: Fix potential data-race in __nft_flowtable_type_get() netfilter: nf_tables: reject new basechain after table flag update netfilter: nf_tables: flush pending destroy work before exit_net release netfilter: nf_tables: release mutex after nft_gc_seq_end from abort path netfilter: nf_tables: release batch on table validation from abort path ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
ammarfaizi2
pushed a commit
that referenced
this pull request
Apr 26, 2024
Drop support for virtualizing adaptive PEBS, as KVM's implementation is architecturally broken without an obvious/easy path forward, and because exposing adaptive PEBS can leak host LBRs to the guest, i.e. can leak host kernel addresses to the guest. Bug #1 is that KVM doesn't account for the upper 32 bits of IA32_FIXED_CTR_CTRL when (re)programming fixed counters, e.g fixed_ctrl_field() drops the upper bits, reprogram_fixed_counters() stores local variables as u8s and truncates the upper bits too, etc. Bug #2 is that, because KVM _always_ sets precise_ip to a non-zero value for PEBS events, perf will _always_ generate an adaptive record, even if the guest requested a basic record. Note, KVM will also enable adaptive PEBS in individual *counter*, even if adaptive PEBS isn't exposed to the guest, but this is benign as MSR_PEBS_DATA_CFG is guaranteed to be zero, i.e. the guest will only ever see Basic records. Bug #3 is in perf. intel_pmu_disable_fixed() doesn't clear the upper bits either, i.e. leaves ICL_FIXED_0_ADAPTIVE set, and intel_pmu_enable_fixed() effectively doesn't clear ICL_FIXED_0_ADAPTIVE either. I.e. perf _always_ enables ADAPTIVE counters, regardless of what KVM requests. Bug #4 is that adaptive PEBS *might* effectively bypass event filters set by the host, as "Updated Memory Access Info Group" records information that might be disallowed by userspace via KVM_SET_PMU_EVENT_FILTER. Bug #5 is that KVM doesn't ensure LBR MSRs hold guest values (or at least zeros) when entering a vCPU with adaptive PEBS, which allows the guest to read host LBRs, i.e. host RIPs/addresses, by enabling "LBR Entries" records. Disable adaptive PEBS support as an immediate fix due to the severity of the LBR leak in particular, and because fixing all of the bugs will be non-trivial, e.g. not suitable for backporting to stable kernels. Note! This will break live migration, but trying to make KVM play nice with live migration would be quite complicated, wouldn't be guaranteed to work (i.e. KVM might still kill/confuse the guest), and it's not clear that there are any publicly available VMMs that support adaptive PEBS, let alone live migrate VMs that support adaptive PEBS, e.g. QEMU doesn't support PEBS in any capacity. Link: https://lore.kernel.org/all/[email protected] Link: https://lore.kernel.org/all/[email protected] Fixes: c59a1f1 ("KVM: x86/pmu: Add IA32_PEBS_ENABLE MSR emulation for extended PEBS") Cc: [email protected] Cc: Like Xu <[email protected]> Cc: Mingwei Zhang <[email protected]> Cc: Zhenyu Wang <[email protected]> Cc: Zhang Xiong <[email protected]> Cc: Lv Zhiyuan <[email protected]> Cc: Dapeng Mi <[email protected]> Cc: Jim Mattson <[email protected]> Acked-by: Like Xu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sean Christopherson <[email protected]>
ammarfaizi2
pushed a commit
that referenced
this pull request
Apr 26, 2024
…git/netfilter/nf netfilter pull request 24-04-11 Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: Patches #1 and #2 add missing rcu read side lock when iterating over expression and object type list which could race with module removal. Patch #3 prevents promisc packet from visiting the bridge/input hook to amend a recent fix to address conntrack confirmation race in br_netfilter and nf_conntrack_bridge. Patch #4 adds and uses iterate decorator type to fetch the current pipapo set backend datastructure view when netlink dumps the set elements. Patch #5 fixes removal of duplicate elements in the pipapo set backend. Patch #6 flowtable validates pppoe header before accessing it. Patch #7 fixes flowtable datapath for pppoe packets, otherwise lookup fails and pppoe packets follow classic path. ==================== Signed-off-by: David S. Miller <[email protected]>
ammarfaizi2
pushed a commit
that referenced
this pull request
Apr 26, 2024
When I did hard offline test with hugetlb pages, below deadlock occurs: ====================================================== WARNING: possible circular locking dependency detected 6.8.0-11409-gf6cef5f8c37f #1 Not tainted ------------------------------------------------------ bash/46904 is trying to acquire lock: ffffffffabe68910 (cpu_hotplug_lock){++++}-{0:0}, at: static_key_slow_dec+0x16/0x60 but task is already holding lock: ffffffffabf92ea8 (pcp_batch_high_lock){+.+.}-{3:3}, at: zone_pcp_disable+0x16/0x40 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (pcp_batch_high_lock){+.+.}-{3:3}: __mutex_lock+0x6c/0x770 page_alloc_cpu_online+0x3c/0x70 cpuhp_invoke_callback+0x397/0x5f0 __cpuhp_invoke_callback_range+0x71/0xe0 _cpu_up+0xeb/0x210 cpu_up+0x91/0xe0 cpuhp_bringup_mask+0x49/0xb0 bringup_nonboot_cpus+0xb7/0xe0 smp_init+0x25/0xa0 kernel_init_freeable+0x15f/0x3e0 kernel_init+0x15/0x1b0 ret_from_fork+0x2f/0x50 ret_from_fork_asm+0x1a/0x30 -> #0 (cpu_hotplug_lock){++++}-{0:0}: __lock_acquire+0x1298/0x1cd0 lock_acquire+0xc0/0x2b0 cpus_read_lock+0x2a/0xc0 static_key_slow_dec+0x16/0x60 __hugetlb_vmemmap_restore_folio+0x1b9/0x200 dissolve_free_huge_page+0x211/0x260 __page_handle_poison+0x45/0xc0 memory_failure+0x65e/0xc70 hard_offline_page_store+0x55/0xa0 kernfs_fop_write_iter+0x12c/0x1d0 vfs_write+0x387/0x550 ksys_write+0x64/0xe0 do_syscall_64+0xca/0x1e0 entry_SYSCALL_64_after_hwframe+0x6d/0x75 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(pcp_batch_high_lock); lock(cpu_hotplug_lock); lock(pcp_batch_high_lock); rlock(cpu_hotplug_lock); *** DEADLOCK *** 5 locks held by bash/46904: #0: ffff98f6c3bb23f0 (sb_writers#5){.+.+}-{0:0}, at: ksys_write+0x64/0xe0 #1: ffff98f6c328e488 (&of->mutex){+.+.}-{3:3}, at: kernfs_fop_write_iter+0xf8/0x1d0 #2: ffff98ef83b31890 (kn->active#113){.+.+}-{0:0}, at: kernfs_fop_write_iter+0x100/0x1d0 #3: ffffffffabf9db48 (mf_mutex){+.+.}-{3:3}, at: memory_failure+0x44/0xc70 #4: ffffffffabf92ea8 (pcp_batch_high_lock){+.+.}-{3:3}, at: zone_pcp_disable+0x16/0x40 stack backtrace: CPU: 10 PID: 46904 Comm: bash Kdump: loaded Not tainted 6.8.0-11409-gf6cef5f8c37f #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x68/0xa0 check_noncircular+0x129/0x140 __lock_acquire+0x1298/0x1cd0 lock_acquire+0xc0/0x2b0 cpus_read_lock+0x2a/0xc0 static_key_slow_dec+0x16/0x60 __hugetlb_vmemmap_restore_folio+0x1b9/0x200 dissolve_free_huge_page+0x211/0x260 __page_handle_poison+0x45/0xc0 memory_failure+0x65e/0xc70 hard_offline_page_store+0x55/0xa0 kernfs_fop_write_iter+0x12c/0x1d0 vfs_write+0x387/0x550 ksys_write+0x64/0xe0 do_syscall_64+0xca/0x1e0 entry_SYSCALL_64_after_hwframe+0x6d/0x75 RIP: 0033:0x7fc862314887 Code: 10 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24 RSP: 002b:00007fff19311268 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 000000000000000c RCX: 00007fc862314887 RDX: 000000000000000c RSI: 000056405645fe10 RDI: 0000000000000001 RBP: 000056405645fe10 R08: 00007fc8623d1460 R09: 000000007fffffff R10: 0000000000000000 R11: 0000000000000246 R12: 000000000000000c R13: 00007fc86241b780 R14: 00007fc862417600 R15: 00007fc862416a00 In short, below scene breaks the lock dependency chain: memory_failure __page_handle_poison zone_pcp_disable -- lock(pcp_batch_high_lock) dissolve_free_huge_page __hugetlb_vmemmap_restore_folio static_key_slow_dec cpus_read_lock -- rlock(cpu_hotplug_lock) Fix this by calling drain_all_pages() instead. This issue won't occur until commit a6b4085 ("mm: hugetlb: replace hugetlb_free_vmemmap_enabled with a static_key"). As it introduced rlock(cpu_hotplug_lock) in dissolve_free_huge_page() code path while lock(pcp_batch_high_lock) is already in the __page_handle_poison(). [[email protected]: extend comment per Oscar] [[email protected]: reflow block comment] Link: https://lkml.kernel.org/r/[email protected] Fixes: a6b4085 ("mm: hugetlb: replace hugetlb_free_vmemmap_enabled with a static_key") Signed-off-by: Miaohe Lin <[email protected]> Acked-by: Oscar Salvador <[email protected]> Reviewed-by: Jane Chu <[email protected]> Cc: Naoya Horiguchi <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]>
ammarfaizi2
pushed a commit
that referenced
this pull request
Apr 26, 2024
vhost_worker will call tun call backs to receive packets. If too many illegal packets arrives, tun_do_read will keep dumping packet contents. When console is enabled, it will costs much more cpu time to dump packet and soft lockup will be detected. net_ratelimit mechanism can be used to limit the dumping rate. PID: 33036 TASK: ffff949da6f20000 CPU: 23 COMMAND: "vhost-32980" #0 [fffffe00003fce50] crash_nmi_callback at ffffffff89249253 #1 [fffffe00003fce58] nmi_handle at ffffffff89225fa3 #2 [fffffe00003fceb0] default_do_nmi at ffffffff8922642e #3 [fffffe00003fced0] do_nmi at ffffffff8922660d #4 [fffffe00003fcef0] end_repeat_nmi at ffffffff89c01663 [exception RIP: io_serial_in+20] RIP: ffffffff89792594 RSP: ffffa655314979e8 RFLAGS: 00000002 RAX: ffffffff89792500 RBX: ffffffff8af428a0 RCX: 0000000000000000 RDX: 00000000000003fd RSI: 0000000000000005 RDI: ffffffff8af428a0 RBP: 0000000000002710 R8: 0000000000000004 R9: 000000000000000f R10: 0000000000000000 R11: ffffffff8acbf64f R12: 0000000000000020 R13: ffffffff8acbf698 R14: 0000000000000058 R15: 0000000000000000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #5 [ffffa655314979e8] io_serial_in at ffffffff89792594 #6 [ffffa655314979e8] wait_for_xmitr at ffffffff89793470 #7 [ffffa65531497a08] serial8250_console_putchar at ffffffff897934f6 #8 [ffffa65531497a20] uart_console_write at ffffffff8978b605 #9 [ffffa65531497a48] serial8250_console_write at ffffffff89796558 #10 [ffffa65531497ac8] console_unlock at ffffffff89316124 #11 [ffffa65531497b10] vprintk_emit at ffffffff89317c07 #12 [ffffa65531497b68] printk at ffffffff89318306 #13 [ffffa65531497bc8] print_hex_dump at ffffffff89650765 #14 [ffffa65531497ca8] tun_do_read at ffffffffc0b06c27 [tun] #15 [ffffa65531497d38] tun_recvmsg at ffffffffc0b06e34 [tun] #16 [ffffa65531497d68] handle_rx at ffffffffc0c5d682 [vhost_net] #17 [ffffa65531497ed0] vhost_worker at ffffffffc0c644dc [vhost] #18 [ffffa65531497f10] kthread at ffffffff892d2e72 #19 [ffffa65531497f50] ret_from_fork at ffffffff89c0022f Fixes: ef3db4a ("tun: avoid BUG, dump packet on GSO errors") Signed-off-by: Lei Chen <[email protected]> Reviewed-by: Willem de Bruijn <[email protected]> Acked-by: Jason Wang <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Acked-by: Michael S. Tsirkin <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
ammarfaizi2
pushed a commit
that referenced
this pull request
Apr 26, 2024
…git/netfilter/nf Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: Patch #1 amends a missing spot where the set iterator type is unset. This is fixing a issue in the previous pull request. Patch #2 fixes the delete set command abort path by restoring state of the elements. Reverse logic for the activate (abort) case otherwise element state is not restored, this requires to move the check for active/inactive elements to the set iterator callback. From the deactivate path, toggle the next generation bit and from the activate (abort) path, clear the next generation bitmask. Patch #3 skips elements already restored by delete set command from the abort path in case there is a previous delete element command in the batch. Check for the next generation bit just like it is done via set iteration to restore maps. netfilter pull request 24-04-18 * tag 'nf-24-04-18' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: nf_tables: fix memleak in map from abort path netfilter: nf_tables: restore set elements when delete set fails netfilter: nf_tables: missing iterator type in lookup walk ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
ammarfaizi2
pushed a commit
that referenced
this pull request
Apr 26, 2024
Petr Machata says: ==================== mlxsw: Fixes This patchset fixes the following issues: - During driver de-initialization the driver unregisters the EMAD response trap by setting its action to DISCARD. However the manual only permits TRAP and FORWARD, and future firmware versions will enforce this. In patch #1, suppress the error message by aligning the driver to the manual and use a FORWARD (NOP) action when unregistering the trap. - The driver queries the Management Capabilities Mask (MCAM) register during initialization to understand if certain features are supported. However, not all firmware versions support this register, leading to the driver failing to load. Patches #2 and #3 fix this issue by treating an error in the register query as an indication that the feature is not supported. v2: - Patch #2: - Make mlxsw_env_max_module_eeprom_len_query() void ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
ammarfaizi2
pushed a commit
that referenced
this pull request
Apr 26, 2024
9f74a3d ("ice: Fix VF Reset paths when interface in a failed over aggregate"), the ice driver has acquired the LAG mutex in ice_reset_vf(). The commit placed this lock acquisition just prior to the acquisition of the VF configuration lock. If ice_reset_vf() acquires the configuration lock via the ICE_VF_RESET_LOCK flag, this could deadlock with ice_vc_cfg_qs_msg() because it always acquires the locks in the order of the VF configuration lock and then the LAG mutex. Lockdep reports this violation almost immediately on creating and then removing 2 VF: ====================================================== WARNING: possible circular locking dependency detected 6.8.0-rc6 #54 Tainted: G W O ------------------------------------------------------ kworker/60:3/6771 is trying to acquire lock: ff40d43e099380a0 (&vf->cfg_lock){+.+.}-{3:3}, at: ice_reset_vf+0x22f/0x4d0 [ice] but task is already holding lock: ff40d43ea1961210 (&pf->lag_mutex){+.+.}-{3:3}, at: ice_reset_vf+0xb7/0x4d0 [ice] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&pf->lag_mutex){+.+.}-{3:3}: __lock_acquire+0x4f8/0xb40 lock_acquire+0xd4/0x2d0 __mutex_lock+0x9b/0xbf0 ice_vc_cfg_qs_msg+0x45/0x690 [ice] ice_vc_process_vf_msg+0x4f5/0x870 [ice] __ice_clean_ctrlq+0x2b5/0x600 [ice] ice_service_task+0x2c9/0x480 [ice] process_one_work+0x1e9/0x4d0 worker_thread+0x1e1/0x3d0 kthread+0x104/0x140 ret_from_fork+0x31/0x50 ret_from_fork_asm+0x1b/0x30 -> #0 (&vf->cfg_lock){+.+.}-{3:3}: check_prev_add+0xe2/0xc50 validate_chain+0x558/0x800 __lock_acquire+0x4f8/0xb40 lock_acquire+0xd4/0x2d0 __mutex_lock+0x9b/0xbf0 ice_reset_vf+0x22f/0x4d0 [ice] ice_process_vflr_event+0x98/0xd0 [ice] ice_service_task+0x1cc/0x480 [ice] process_one_work+0x1e9/0x4d0 worker_thread+0x1e1/0x3d0 kthread+0x104/0x140 ret_from_fork+0x31/0x50 ret_from_fork_asm+0x1b/0x30 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&pf->lag_mutex); lock(&vf->cfg_lock); lock(&pf->lag_mutex); lock(&vf->cfg_lock); *** DEADLOCK *** 4 locks held by kworker/60:3/6771: #0: ff40d43e05428b38 ((wq_completion)ice){+.+.}-{0:0}, at: process_one_work+0x176/0x4d0 #1: ff50d06e05197e58 ((work_completion)(&pf->serv_task)){+.+.}-{0:0}, at: process_one_work+0x176/0x4d0 #2: ff40d43ea1960e50 (&pf->vfs.table_lock){+.+.}-{3:3}, at: ice_process_vflr_event+0x48/0xd0 [ice] #3: ff40d43ea1961210 (&pf->lag_mutex){+.+.}-{3:3}, at: ice_reset_vf+0xb7/0x4d0 [ice] stack backtrace: CPU: 60 PID: 6771 Comm: kworker/60:3 Tainted: G W O 6.8.0-rc6 #54 Hardware name: Workqueue: ice ice_service_task [ice] Call Trace: <TASK> dump_stack_lvl+0x4a/0x80 check_noncircular+0x12d/0x150 check_prev_add+0xe2/0xc50 ? save_trace+0x59/0x230 ? add_chain_cache+0x109/0x450 validate_chain+0x558/0x800 __lock_acquire+0x4f8/0xb40 ? lockdep_hardirqs_on+0x7d/0x100 lock_acquire+0xd4/0x2d0 ? ice_reset_vf+0x22f/0x4d0 [ice] ? lock_is_held_type+0xc7/0x120 __mutex_lock+0x9b/0xbf0 ? ice_reset_vf+0x22f/0x4d0 [ice] ? ice_reset_vf+0x22f/0x4d0 [ice] ? rcu_is_watching+0x11/0x50 ? ice_reset_vf+0x22f/0x4d0 [ice] ice_reset_vf+0x22f/0x4d0 [ice] ? process_one_work+0x176/0x4d0 ice_process_vflr_event+0x98/0xd0 [ice] ice_service_task+0x1cc/0x480 [ice] process_one_work+0x1e9/0x4d0 worker_thread+0x1e1/0x3d0 ? __pfx_worker_thread+0x10/0x10 kthread+0x104/0x140 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x31/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 </TASK> To avoid deadlock, we must acquire the LAG mutex only after acquiring the VF configuration lock. Fix the ice_reset_vf() to acquire the LAG mutex only after we either acquire or check that the VF configuration lock is held. Fixes: 9f74a3d ("ice: Fix VF Reset paths when interface in a failed over aggregate") Signed-off-by: Jacob Keller <[email protected]> Reviewed-by: Dave Ertman <[email protected]> Reviewed-by: Mateusz Polchlopek <[email protected]> Tested-by: Przemek Kitszel <[email protected]> Tested-by: Rafal Romanowski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.