Make case and strap

Overview	System	Make circuit	Make case+strap	Wear	Use	Buying list	Downloads	RAMproject

Table of Contents

• How to make the of MOTIONER IMU by Vacuum forming
• How to make the strap for MOTIONER

How to make the case of MOTIONER IMU by Vacuum forming

• 1. Things to prepare
• 2. Make the vacuum forming box
• 3. Make the vacuum forming frame
• 4. Vacuum forming
• 5. Cut out the PVC
• 6. Assembly

Download PDF for vacuum forming

1. Things to prepare

Tupperware	BBQ mesh grill	Double-sided tape
5mm Medium-density fibreboard (MDF)	0.5mm PVC plate	Cotton work gloves
Clips	Urethane tape	Wood pedestal x2
Electric Burner	Vacuum cleaner

Back to top

2. Make the vacuum forming box

Back to top

3. Make the vacuum forming frame

Back to top

4. Vacuum forming

Back to top

5. Cut out the PVC

Back to top

6. Assembly

Download PDF for drawing of MOTIONER base

Back to top

How to make the straps for MOTIONER

# MOTIONER strap of how to make

Table of Contents

• [0, shall be prepared] (#Make-sprepare)
• [1, length of Velcro necessary] (#Make-tapecut)
• [2, sew] (#Make-sew)

0,shall be prepared

stretch Velcro (loop) width 25mm	10m
stretch Velcro (loop) width 50mm	10m
Velcro (hook) width 25mm	10m
sewing needle or sewing machine	1
thread
candles	1

2. Velcro measurements

Note: Velcros length depends on the size of the body. Please use this list as a reference. * Elastic Velcro (loop) 25mm

32cm	4
29cm	2
21cm	2
17cm	2
12cm	2

• Elastic Velcro (loop) 50mm

90cm	2
60cm	2

• Velcro (hook) 25mm

12cm	4
10cm	2
5cm	7
3cm	30

Back to make the strap top | Back to top

2,Sew

1. Trim the Velcro (hook and loop) down to the size that fit the each part.

2. Burn the edge of the cut Velcro to prevent it from fraying.
   
   

3. Position the edge of the hook (around 5mm) to the edge of the loop (around 5mm) and sew them. Using a sewing machine will be faster.
   
   
   

4. Thighs, chest, waist sew a hook at the end of the loop.
   

Back to make the strap top | Back to top

Hook notation Ring notation

25mm width stretch Velcro (loop)

Head 80cmcm Upper arm joint right 17cm Upper arm joint left 17cm Upper arm right 32cm Upper arm left 32cm Forearm right 32cm Forearm left 32cm Hand right 21cm Tehidari 21cm Foot right 29cm Foot left 29cm

50mm width stretch Velcro (loop)

Thigh belt left 60cm Thigh belt right 60cm

25mm width Velcro (hook)

Mounting (hock) 12cm

25mm width stretch Velcro (loop) atypical

Chest right 45cm Munehidari 45cm Joint right 45cm for thigh Joint left 45cm for thigh

50mm width stretch Velcro (loop) atypical

Waist 90cm

50mm + 25mm width stretch Velcro (loop) atypical

Back 90cm-24cm

Back to make the strap top | Back to top

This Document by YCAM InterLab, Yoshito Onishi is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.