Skip to content

FloDar Updates

Andrew Walker edited this page Oct 21, 2019 · 37 revisions

FloDar Updates

October 21, 2019 - 3D Printed Compartments

Description

Hadi has created a great print to hold our flowmeter transducers. Installing the transducers has been a pain due to the awkward curve of the pipe and easy slippage. With the new compartments the transducers will be held in place while they are strapped down and set the exact distance apart thanks to the plastic spacing between them.

)

Andrew`

October 21, 2019 - Prototyping

Description

We are working on completing the necessary circuitry for the FloDar computing. So far we have implemented a 150 Ohm resistor to convert the current analog from the flowmeter to voltage, implemented a voltage divider to step down the 5V from the turbidity sensor to 3V, and sending both signals to a 16 bit ADC for more accurate measurements.

Andrew`

Clone this wiki locally