[ConnectedK8s] Added update command (#3)

src/connectedk8s/HISTORY.rst

@@ -3,6 +3,11 @@
 Release History
 ===============
 
+0.2.3
+++++++
+* `az connectedk8s connect`: Modified CLI params for proxy
+* `az connectedk8s update`: Added update command
+
 0.2.2
 ++++++
 * `az connectedk8s connect`: Added CLI params to support proxy.
@@ -18,4 +23,4 @@ Release History
 
 0.1.5
 ++++++
-* Initial release.
+* Initial release.

src/connectedk8s/azext_connectedk8s/_constants.py

@@ -0,0 +1,36 @@
+# --------------------------------------------------------------------------------------------
+# Copyright (c) Microsoft Corporation. All rights reserved.
+# Licensed under the MIT License. See License.txt in the project root for license information.
+# --------------------------------------------------------------------------------------------
+
+
+Invalid_Location_Fault_Type = 'location-validation-error'
+Load_Kubeconfig_Fault_Type = 'kubeconfig-load-error'
+Read_ConfigMap_Fault_Type = 'configmap-read-error'
+Create_ConnectedCluster_Fault_Type = 'connected-cluster-create-error'
+Delete_ConnectedCluster_Fault_Type = 'connected-cluster-delete-error'
+Bad_DeleteRequest_Fault_Type = 'bad-delete-request-error'
+Cluster_Already_Onboarded_Fault_Type = 'cluster-already-onboarded-error'
+Resource_Already_Exists_Fault_Type = 'resource-already-exists-error'
+Resource_Does_Not_Exist_Fault_Type = 'resource-does-not-exist-error'
+Create_ResourceGroup_Fault_Type = 'resource-group-creation-error'
+Add_HelmRepo_Fault_Type = 'helm-repo-add-error'
+List_HelmRelease_Fault_Type = 'helm-list-release-error'
+KeyPair_Generate_Fault_Type = 'keypair-generation-error'
+PublicKey_Export_Fault_Type = 'publickey-export-error'
+PrivateKey_Export_Fault_Type = 'privatekey-export-error'
+Install_HelmRelease_Fault_Type = 'helm-release-install-error'
+Delete_HelmRelease_Fault_Type = 'helm-release-delete-error'
+Check_PodStatus_Fault_Type = 'check-pod-status-error'
+Kubernetes_Connectivity_FaultType = 'kubernetes-cluster-connection-error'
+Helm_Version_Fault_Type = 'helm-not-updated-error'
+Check_HelmVersion_Fault_Type = 'helm-version-check-error'
+Helm_Installation_Fault_Type = 'helm-not-installed-error'
+Check_HelmInstallation_Fault_Type = 'check-helm-installed-error'
+Get_HelmRegistery_Path_Fault_Type = 'helm-registry-path-fetch-error'
+Pull_HelmChart_Fault_Type = 'helm-chart-pull-error'
+Export_HelmChart_Fault_Type = 'helm-chart-export-error'
+Get_Kubernetes_Version_Fault_Type = 'kubernetes-get-version-error'
+Get_Kubernetes_Distro_Fault_Type = 'kubernetes-get-distribution-error'
+Update_Agent_Success = 'Agents for Connected Cluster {} have been updated successfully'
+Update_Agent_Failure = 'Error while updating agents. Please run \"kubectl get pods -n azure-arc\" to check the pods in case of timeout error. Error: {}'

src/connectedk8s/azext_connectedk8s/_help.py

@@ -21,10 +21,18 @@
     - name: Onboard a connected kubernetes cluster by specifying the kubeconfig and kubecontext.
       text: az connectedk8s connect -g resourceGroupName -n connectedClusterName --kube-config /path/to/kubeconfig --kube-context kubeContextName
     - name: Onboard a connected kubernetes cluster by specifying the https proxy, http proxy, no proxy settings.
-      text: az connectedk8s connect -g resourceGroupName -n connectedClusterName --https-proxy https://proxy-url --http-proxy http://proxy-url --no-proxy excludedIP,excludedCIDR,exampleCIDRfollowed,10.0.0.0/24
+      text: az connectedk8s connect -g resourceGroupName -n connectedClusterName --proxy-https https://proxy-url --proxy-http http://proxy-url --proxy-skip-destinations excludedIP,excludedCIDR,exampleCIDRfollowed,10.0.0.0/24
 
 """
 
+helps['connectedk8s update'] = """
+    type: command
+    short-summary: Update properties of the onboarded agents.
+    examples:
+    - name: Update proxy values for the agents
+      text: az connectedk8s update -g resourceGroupName -n connectedClusterName --proxy-https https://proxy-url --proxy-http http://proxy-url --proxy-skip-destinations excludedIP,excludedCIDR,exampleCIDRfollowed,10.0.0.0/24
+"""
+
 helps['connectedk8s list'] = """
     type: command
     short-summary: List connected kubernetes clusters.

src/connectedk8s/azext_connectedk8s/_params.py

@@ -18,9 +18,18 @@ def load_arguments(self, _):
         c.argument('cluster_name', options_list=['--name', '-n'], help='The name of the connected cluster.')
         c.argument('kube_config', options_list=['--kube-config'], help='Path to the kube config file.')
         c.argument('kube_context', options_list=['--kube-context'], help='Kubconfig context from current machine.')
-        c.argument('https_proxy', options_list=['--https-proxy'], help='Https proxy url to be used.')
-        c.argument('http_proxy', options_list=['--http-proxy'], help='Http proxy url to be used.')
-        c.argument('no_proxy', options_list=['--no-proxy'], help='List of urls/CIDRs for which proxy should not to be used.')
+        c.argument('https_proxy', options_list=['--proxy-https'], help='Https proxy URL to be used.')
+        c.argument('http_proxy', options_list=['--proxy-http'], help='Http proxy URL to be used.')
+        c.argument('no_proxy', options_list=['--proxy-skip-destinations'], help='List of URLs/CIDRs for which proxy should not to be used.')
+
+    with self.argument_context('connectedk8s update') as c:
+        c.argument('cluster_name', options_list=['--name', '-n'], id_part='name', help='The name of the connected cluster.')
+        c.argument('tags', tags_type)
+        c.argument('kube_config', options_list=['--kube-config'], help='Path to the kube config file.')
+        c.argument('kube_context', options_list=['--kube-context'], help='Kubconfig context from current machine.')
+        c.argument('https_proxy', options_list=['--proxy-https'], help='Https proxy URL to be used.')
+        c.argument('http_proxy', options_list=['--proxy-http'], help='Http proxy URL to be used.')
+        c.argument('no_proxy', options_list=['--proxy-skip-destinations'], help='List of URLs/CIDRs for which proxy should not to be used.')
 
     with self.argument_context('connectedk8s list') as c:
         pass

src/connectedk8s/azext_connectedk8s/_utils.py

@@ -0,0 +1,110 @@
+# --------------------------------------------------------------------------------------------
+# Copyright (c) Microsoft Corporation. All rights reserved.
+# Licensed under the MIT License. See License.txt in the project root for license information.
+# --------------------------------------------------------------------------------------------
+
+import os
+import subprocess
+from subprocess import Popen, PIPE
+import requests
+
+from knack.util import CLIError
+from azure.cli.core.commands.client_factory import get_subscription_id
+from azure.cli.core import telemetry
+from azext_connectedk8s._client_factory import _resource_client_factory
+import azext_connectedk8s._constants as consts
+
+
+def validate_location(cmd, location):
+    subscription_id = get_subscription_id(cmd.cli_ctx)
+    rp_locations = []
+    resourceClient = _resource_client_factory(cmd.cli_ctx, subscription_id=subscription_id)
+    providerDetails = resourceClient.providers.get('Microsoft.Kubernetes')
+    for resourceTypes in providerDetails.resource_types:
+        if resourceTypes.resource_type == 'connectedClusters':
+            rp_locations = [location.replace(" ", "").lower() for location in resourceTypes.locations]
+            if location.lower() not in rp_locations:
+                telemetry.set_user_fault()
+                telemetry.set_exception(exception='Location not supported', fault_type=consts.Invalid_Location_Fault_Type,
+                                        summary='Provided location is not supported for creating connected clusters')
+                raise CLIError("Connected cluster resource creation is supported only in the following locations: " +
+                               ', '.join(map(str, rp_locations)) +
+                               ". Use the --location flag to specify one of these locations.")
+            break
+
+
+def get_chart_path(registry_path, kube_config, kube_context):
+    # Pulling helm chart from registry
+    os.environ['HELM_EXPERIMENTAL_OCI'] = '1'
+    pull_helm_chart(registry_path, kube_config, kube_context)
+
+    # Exporting helm chart
+    chart_export_path = os.path.join(os.path.expanduser('~'), '.azure', 'AzureArcCharts')
+    export_helm_chart(registry_path, chart_export_path, kube_config, kube_context)
+    # Helm Install
+    helm_chart_path = os.path.join(chart_export_path, 'azure-arc-k8sagents')
+    chart_path = os.getenv('HELMCHART') if os.getenv('HELMCHART') else helm_chart_path
+    return chart_path
+
+
+def pull_helm_chart(registry_path, kube_config, kube_context):
+    cmd_helm_chart_pull = ["helm", "chart", "pull", registry_path, "--kubeconfig", kube_config]
+    if kube_context:
+        cmd_helm_chart_pull.extend(["--kube-context", kube_context])
+    response_helm_chart_pull = subprocess.Popen(cmd_helm_chart_pull, stdout=PIPE, stderr=PIPE)
+    _, error_helm_chart_pull = response_helm_chart_pull.communicate()
+    if response_helm_chart_pull.returncode != 0:
+        telemetry.set_exception(exception=error_helm_chart_pull.decode("ascii"), fault_type=consts.Pull_HelmChart_Fault_Type,
+                                summary='Unable to pull helm chart from the registry')
+        raise CLIError("Unable to pull helm chart from the registry '{}': ".format(registry_path) + error_helm_chart_pull.decode("ascii"))
+
+
+def export_helm_chart(registry_path, chart_export_path, kube_config, kube_context):
+    chart_export_path = os.path.join(os.path.expanduser('~'), '.azure', 'AzureArcCharts')
+    cmd_helm_chart_export = ["helm", "chart", "export", registry_path, "--destination", chart_export_path, "--kubeconfig", kube_config]
+    if kube_context:
+        cmd_helm_chart_export.extend(["--kube-context", kube_context])
+    response_helm_chart_export = subprocess.Popen(cmd_helm_chart_export, stdout=PIPE, stderr=PIPE)
+    _, error_helm_chart_export = response_helm_chart_export.communicate()
+    if response_helm_chart_export.returncode != 0:
+        telemetry.set_exception(exception=error_helm_chart_export.decode("ascii"), fault_type=consts.Export_HelmChart_Fault_Type,
+                                summary='Unable to export helm chart from the registry')
+        raise CLIError("Unable to export helm chart from the registry '{}': ".format(registry_path) + error_helm_chart_export.decode("ascii"))
+
+
+def add_helm_repo(kube_config, kube_context):
+    if os.getenv('HELMREPONAME') and os.getenv('HELMREPOURL'):
+        repo_name = os.getenv('HELMREPONAME')
+        repo_url = os.getenv('HELMREPOURL')
+        cmd_helm_repo = ["helm", "repo", "add", repo_name, repo_url, "--kubeconfig", kube_config]
+        if kube_context:
+            cmd_helm_repo.extend(["--kube-context", kube_context])
+        response_helm_repo = Popen(cmd_helm_repo, stdout=PIPE, stderr=PIPE)
+        _, error_helm_repo = response_helm_repo.communicate()
+        if response_helm_repo.returncode != 0:
+            telemetry.set_exception(exception=error_helm_repo.decode("ascii"), fault_type=consts.Add_HelmRepo_Fault_Type,
+                                    summary='Failed to add helm repository')
+            raise CLIError("Unable to add repository {} to helm: ".format(repo_url) + error_helm_repo.decode("ascii"))
+
+
+def get_helm_registry(profile, location):
+    cred, _, _ = profile.get_login_credentials(
+        resource='https://management.core.windows.net/')
+    token = cred._token_retriever()[2].get('accessToken')  # pylint: disable=protected-access
+
+    get_chart_location_url = "https://{}.dp.kubernetesconfiguration.azure.com/{}/GetLatestHelmPackagePath?api-version=2019-11-01-preview".format(location, 'azure-arc-k8sagents')
+    query_parameters = {}
+    query_parameters['releaseTrain'] = os.getenv('RELEASETRAIN') if os.getenv('RELEASETRAIN') else 'stable'
+    header_parameters = {}
+    header_parameters['Authorization'] = "Bearer {}".format(str(token))
+    try:
+        response = requests.post(get_chart_location_url, params=query_parameters, headers=header_parameters)
+    except Exception as e:
+        telemetry.set_exception(exception=e, fault_type=consts.Get_HelmRegistery_Path_Fault_Type,
+                                summary='Error while fetching helm chart registry path')
+        raise CLIError("Error while fetching helm chart registry path: " + str(e))
+    if response.status_code == 200:
+        return response.json().get('repositoryPath')
+    telemetry.set_exception(exception=str(response.json()), fault_type=consts.Get_HelmRegistery_Path_Fault_Type,
+                            summary='Error while fetching helm chart registry path')
+    raise CLIError("Error while fetching helm chart registry path: {}".format(str(response.json())))

src/connectedk8s/azext_connectedk8s/commands.py

@@ -19,6 +19,7 @@ def load_command_table(self, _):
 
     with self.command_group('connectedk8s', connectedk8s_sdk, client_factory=cf_connected_cluster) as g:
         g.custom_command('connect', 'create_connectedk8s', supports_no_wait=True)
+        g.custom_command('update', 'update_agents', supports_no_wait=True)
         g.custom_command('delete', 'delete_connectedk8s', confirmation=True, supports_no_wait=True)
         g.custom_command('list', 'list_connectedk8s', table_transformer=connectedk8s_list_table_format)
         g.custom_show_command('show', 'get_connectedk8s', table_transformer=connectedk8s_show_table_format)