Sane FireSim Default Target Freqs

generators/chipyard/src/main/scala/ConfigFragments.scala

@@ -319,3 +319,18 @@ class WithControlBusFrequency(freqMHz: Double) extends Config((site, here, up) =
 
 class WithRationalMemoryBusCrossing extends WithSbusToMbusCrossingType(RationalCrossing(Symmetric))
 class WithAsynchrousMemoryBusCrossing extends WithSbusToMbusCrossingType(AsynchronousCrossing())
+
+class WithTestChipBusFreqs extends Config(
+  // Frequency specifications
+  new chipyard.config.WithTileFrequency(1600.0) ++       // Matches the maximum frequency of U540
+  new chipyard.config.WithSystemBusFrequency(800.0) ++   // Put the system bus at a lower freq, representative of ncore working at a lower frequency than the tiles. Same freq as U540
+  new chipyard.config.WithMemoryBusFrequency(1000.0) ++  // 2x the U540 freq (appropriate for a 128b Mbus)
+  new chipyard.config.WithPeripheryBusFrequency(800.0) ++  // Match the sbus and pbus frequency
+  new chipyard.config.WithSystemBusFrequencyAsDefault ++ // All unspecified clock frequencies, notably the implicit clock, will use the sbus freq (800 MHz)
+  //  Crossing specifications
+  new chipyard.config.WithCbusToPbusCrossingType(AsynchronousCrossing()) ++ // Add Async crossing between PBUS and CBUS
+  new chipyard.config.WithSbusToMbusCrossingType(AsynchronousCrossing()) ++ // Add Async crossings between backside of L2 and MBUS
+  new freechips.rocketchip.subsystem.WithAsynchronousRocketTiles(4,4) ++   // Add Async crossings between RocketTile and uncore
+  new boom.common.WithAsynchronousBoomTiles ++ // Add Async crossings between BoomTile and uncore
+  new testchipip.WithAsynchronousSerialSlaveCrossing // Add Async crossing between serial and MBUS. Its master-side is tied to the FBUS
+)

generators/chipyard/src/main/scala/config/RocketConfigs.scala

@@ -207,6 +207,11 @@ class MulticlockRocketConfig extends Config(
   new testchipip.WithAsynchronousSerialSlaveCrossing ++ // Add Async crossing between serial and MBUS. Its master-side is tied to the FBUS
   new chipyard.config.AbstractConfig)
 
+class TestChipMulticlockRocketConfig extends Config(
+  new freechips.rocketchip.subsystem.WithNBigCores(1) ++
+  new chipyard.config.WithTestChipBusFreqs ++
+  new chipyard.config.AbstractConfig)
+
 class LBWIFRocketConfig extends Config(
   new testchipip.WithSerialTLMem(isMainMemory=true) ++      // set lbwif memory base to DRAM_BASE, use as main memory
   new freechips.rocketchip.subsystem.WithNoMemPort ++       // remove AXI4 backing memory

generators/firechip/src/main/scala/TargetConfigs.scala

@@ -12,7 +12,7 @@ import freechips.rocketchip.rocket.DCacheParams
 import freechips.rocketchip.subsystem._
 import freechips.rocketchip.devices.tilelink.{BootROMLocated, BootROMParams}
 import freechips.rocketchip.devices.debug.{DebugModuleParams, DebugModuleKey}
-import freechips.rocketchip.diplomacy.LazyModule
+import freechips.rocketchip.diplomacy.{LazyModule, AsynchronousCrossing}
 import testchipip.{BlockDeviceKey, BlockDeviceConfig, TracePortKey, TracePortParams}
 import sifive.blocks.devices.uart.{PeripheryUARTKey, UARTParams}
 import scala.math.{min, max}
@@ -50,6 +50,7 @@ class WithScalaTestFeatures extends Config((site, here, up) => {
 
 // FASED Config Aliases. This to enable config generation via "_" concatenation
 // which requires that all config classes be defined in the same package
+class DDR3FCFS extends FCFS16GBQuadRank
 class DDR3FRFCFS extends FRFCFS16GBQuadRank
 class DDR3FRFCFSLLC4MB extends FRFCFS16GBQuadRankLLC4MB
 
@@ -83,12 +84,14 @@ class WithFireSimDesignTweaks extends Config(
   new chipyard.config.WithNoDebug
 )
 
-// Tweaks to modify target clock frequencies / crossings to firesim defaults
-class WithFireSimDefaultFrequencyTweaks extends Config(
-  // Optional*: Removing this will require adjusting the UART baud rate and
-  // potential target-software changes to properly capture UART output
+// Tweaks to modify target clock frequencies / crossings to legacy firesim defaults
+class WithFireSimHighPerfClocking extends Config(
+  // Optional: This sets the default frequency for all buses in the system to 3.2 GHz
+  // (since unspecified bus frequencies will use the pbus frequency)
+  // This frequency selection matches FireSim's legacy selection and is required
+  // to support 200Gb NIC performance. You may select a smaller value.
   new chipyard.config.WithPeripheryBusFrequency(3200.0) ++
-  // Optional: These three configs put the DRAM memory system in it's own clock domian.
+  // Optional: These three configs put the DRAM memory system in it's own clock domain.
   // Removing the first config will result in the FASED timing model running
   // at the pbus freq (above, 3.2 GHz), which is outside the range of valid DDR3 speedgrades.
   // 1 GHz matches the FASED default, using some other frequency will require
@@ -98,9 +101,28 @@ class WithFireSimDefaultFrequencyTweaks extends Config(
   new testchipip.WithAsynchronousSerialSlaveCrossing
 )
 
-// Tweaks that are generally applied to all firesim configs
+// Tweaks that are generally applied to all firesim configs setting a single clock domain at 1000 MHz
 class WithFireSimConfigTweaks extends Config(
-  new WithFireSimDefaultFrequencyTweaks ++
+  // 1 GHz matches the FASED default (DRAM modeli realistically configured for that frequency)
+  // Using some other frequency will require runnings the FASED runtime configuration generator 
+  // to generate faithful DDR3 timing values.
+  new chipyard.config.WithSystemBusFrequency(1000.0) ++
+  new chipyard.config.WithSystemBusFrequencyAsDefault ++ // All unspecified clock frequencies, notably the implicit clock, will use the sbus freq (1000 MHz)
+  // Explicitly set PBUS + MBUS to 1000 MHz, since they will be driven to 100 MHz by default because of assignments in the Chisel
+  new chipyard.config.WithPeripheryBusFrequency(1000.0) ++
+  new chipyard.config.WithMemoryBusFrequency(1000.0) ++
+  new WithFireSimDesignTweaks
+)
+
+// Tweak more representative of testchip configs
+class WithFireSimTestChipConfigTweaks extends Config(
+  new chipyard.config.WithTestChipBusFreqs ++
+  new WithFireSimDesignTweaks
+)
+
+// Tweaks for legacy FireSim configs.
+class WithFireSimHighPerfConfigTweaks extends Config(
+  new WithFireSimHighPerfClocking ++
   new WithFireSimDesignTweaks
 )
 
@@ -204,11 +226,6 @@ class FireSimCVA6Config extends Config(
 //**********************************************************************************
 //* Multiclock Configurations
 //*********************************************************************************/
-class FireSimMulticlockRocketConfig extends Config(
-  new chipyard.config.WithTileFrequency(6400.0) ++ //lol
-  new freechips.rocketchip.subsystem.WithRationalRocketTiles ++   // Add rational crossings between RocketTile and uncore
-  new FireSimRocketConfig)
-
 class FireSimMulticlockAXIOverSerialConfig extends Config(
   new WithAXIOverSerialTLCombinedBridges ++ // use combined bridge to connect to axi mem over serial
   new WithDefaultFireSimBridges ++

generators/firechip/src/test/scala/ScalaTestSuite.scala

@@ -107,17 +107,11 @@ abstract class FireSimTestSuite(
 class RocketF1Tests extends FireSimTestSuite("FireSim", "DDR3FRFCFSLLC4MB_FireSimQuadRocketConfig", "WithSynthAsserts_BaseF1Config")
 class BoomF1Tests extends FireSimTestSuite("FireSim", "DDR3FRFCFSLLC4MB_FireSimLargeBoomConfig", "BaseF1Config")
 class RocketNICF1Tests extends FireSimTestSuite("FireSim", "WithNIC_DDR3FRFCFSLLC4MB_FireSimRocketConfig", "BaseF1Config")
-// Multiclock tests
-class RocketMulticlockF1Tests extends FireSimTestSuite(
-  "FireSim",
-  "FireSimMulticlockRocketConfig",
-  "WithSynthAsserts_BaseF1Config")
 
 class CVA6F1Tests extends FireSimTestSuite("FireSim", "WithNIC_DDR3FRFCFSLLC4MB_FireSimCVA6Config", "BaseF1Config")
 
 // This test suite only mirrors what is run in CI. CI invokes each test individually, using a testOnly call.
 class CITests extends Suites(
   new RocketF1Tests,
   new BoomF1Tests,
-  new RocketNICF1Tests,
-  new RocketMulticlockF1Tests)
+  new RocketNICF1Tests)