Update REPORTING-BUGS #65

ghost · 2014-01-02T14:31:45Z

No description provided.

…-fixes WARNING: line over 80 characters torvalds#65: FILE: arch/x86/mm/srat.c:187: + (unsigned long long) start, (unsigned long long) end - 1); total: 0 errors, 1 warnings, 19 lines checked ./patches/acpi-numa-mem_hotplug-mark-hotpluggable-memory-in-memblock.patch has style problems, please review. If any of these errors are false positives, please report them to the maintainer, see CHECKPATCH in MAINTAINERS. Please run checkpatch prior to sending patches Cc: Tang Chen <[email protected]> Cc: Zhang Yanfei <[email protected]> Signed-off-by: Andrew Morton <[email protected]>

Dave Jones reported the following bug: "When fed mangled socket data, rds will trust what userspace gives it, and tries to allocate enormous amounts of memory larger than what kmalloc can satisfy." WARNING: at mm/page_alloc.c:2393 __alloc_pages_nodemask+0xa0d/0xbe0() Hardware name: GA-MA78GM-S2H Modules linked in: vmw_vsock_vmci_transport vmw_vmci vsock fuse bnep dlci bridge 8021q garp stp mrp binfmt_misc l2tp_ppp l2tp_core rfcomm s Pid: 24652, comm: trinity-child2 Not tainted 3.8.0+ torvalds#65 Call Trace: [<ffffffff81044155>] warn_slowpath_common+0x75/0xa0 [<ffffffff8104419a>] warn_slowpath_null+0x1a/0x20 [<ffffffff811444ad>] __alloc_pages_nodemask+0xa0d/0xbe0 [<ffffffff8100a196>] ? native_sched_clock+0x26/0x90 [<ffffffff810b2128>] ? trace_hardirqs_off_caller+0x28/0xc0 [<ffffffff810b21cd>] ? trace_hardirqs_off+0xd/0x10 [<ffffffff811861f8>] alloc_pages_current+0xb8/0x180 [<ffffffff8113eaaa>] __get_free_pages+0x2a/0x80 [<ffffffff811934fe>] kmalloc_order_trace+0x3e/0x1a0 [<ffffffff81193955>] __kmalloc+0x2f5/0x3a0 [<ffffffff8104df0c>] ? local_bh_enable_ip+0x7c/0xf0 [<ffffffffa0401ab3>] rds_message_alloc+0x23/0xb0 [rds] [<ffffffffa04043a1>] rds_sendmsg+0x2b1/0x990 [rds] [<ffffffff810b21cd>] ? trace_hardirqs_off+0xd/0x10 [<ffffffff81564620>] sock_sendmsg+0xb0/0xe0 [<ffffffff810b2052>] ? get_lock_stats+0x22/0x70 [<ffffffff810b24be>] ? put_lock_stats.isra.23+0xe/0x40 [<ffffffff81567f30>] sys_sendto+0x130/0x180 [<ffffffff810b872d>] ? trace_hardirqs_on+0xd/0x10 [<ffffffff816c547b>] ? _raw_spin_unlock_irq+0x3b/0x60 [<ffffffff816cd767>] ? sysret_check+0x1b/0x56 [<ffffffff810b8695>] ? trace_hardirqs_on_caller+0x115/0x1a0 [<ffffffff81341d8e>] ? trace_hardirqs_on_thunk+0x3a/0x3f [<ffffffff816cd742>] system_call_fastpath+0x16/0x1b ---[ end trace eed6ae990d018c8b ]--- Reported-by: Dave Jones <[email protected]> Cc: Dave Jones <[email protected]> Cc: David S. Miller <[email protected]> Cc: Venkat Venkatsubra <[email protected]> Signed-off-by: Cong Wang <[email protected]> Acked-by: Venkat Venkatsubra <[email protected]> Signed-off-by: David S. Miller <[email protected]>

Turn it into (for example): [ 0.073380] x86: Booting SMP configuration: [ 0.074005] .... node #0, CPUs: #1 #2 #3 #4 #5 torvalds#6 torvalds#7 [ 0.603005] .... node #1, CPUs: torvalds#8 torvalds#9 torvalds#10 torvalds#11 torvalds#12 torvalds#13 torvalds#14 torvalds#15 [ 1.200005] .... node #2, CPUs: torvalds#16 torvalds#17 torvalds#18 torvalds#19 torvalds#20 torvalds#21 torvalds#22 torvalds#23 [ 1.796005] .... node #3, CPUs: torvalds#24 torvalds#25 torvalds#26 torvalds#27 torvalds#28 torvalds#29 torvalds#30 torvalds#31 [ 2.393005] .... node #4, CPUs: torvalds#32 torvalds#33 torvalds#34 torvalds#35 torvalds#36 torvalds#37 torvalds#38 torvalds#39 [ 2.996005] .... node #5, CPUs: torvalds#40 torvalds#41 torvalds#42 torvalds#43 torvalds#44 torvalds#45 torvalds#46 torvalds#47 [ 3.600005] .... node torvalds#6, CPUs: torvalds#48 torvalds#49 torvalds#50 torvalds#51 #52 #53 torvalds#54 torvalds#55 [ 4.202005] .... node torvalds#7, CPUs: torvalds#56 torvalds#57 #58 torvalds#59 torvalds#60 torvalds#61 torvalds#62 torvalds#63 [ 4.811005] .... node torvalds#8, CPUs: torvalds#64 torvalds#65 torvalds#66 torvalds#67 torvalds#68 torvalds#69 #70 torvalds#71 [ 5.421006] .... node torvalds#9, CPUs: torvalds#72 torvalds#73 torvalds#74 torvalds#75 torvalds#76 torvalds#77 torvalds#78 torvalds#79 [ 6.032005] .... node torvalds#10, CPUs: torvalds#80 torvalds#81 torvalds#82 torvalds#83 torvalds#84 torvalds#85 torvalds#86 torvalds#87 [ 6.648006] .... node torvalds#11, CPUs: torvalds#88 torvalds#89 torvalds#90 torvalds#91 torvalds#92 torvalds#93 torvalds#94 torvalds#95 [ 7.262005] .... node torvalds#12, CPUs: torvalds#96 torvalds#97 torvalds#98 torvalds#99 torvalds#100 torvalds#101 torvalds#102 torvalds#103 [ 7.865005] .... node torvalds#13, CPUs: torvalds#104 torvalds#105 torvalds#106 torvalds#107 torvalds#108 torvalds#109 torvalds#110 torvalds#111 [ 8.466005] .... node torvalds#14, CPUs: torvalds#112 torvalds#113 torvalds#114 torvalds#115 torvalds#116 torvalds#117 torvalds#118 torvalds#119 [ 9.073006] .... node torvalds#15, CPUs: torvalds#120 torvalds#121 torvalds#122 torvalds#123 torvalds#124 torvalds#125 torvalds#126 torvalds#127 [ 9.679901] x86: Booted up 16 nodes, 128 CPUs and drop useless elements. Change num_digits() to hpa's division-avoiding, cell-phone-typed version which he went at great lengths and pains to submit on a Saturday evening. Signed-off-by: Borislav Petkov <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: Linus Torvalds <[email protected]> Cc: Andrew Morton <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>

…-fixes WARNING: line over 80 characters #65: FILE: arch/x86/mm/srat.c:187: + (unsigned long long) start, (unsigned long long) end - 1); total: 0 errors, 1 warnings, 19 lines checked ./patches/acpi-numa-mem_hotplug-mark-hotpluggable-memory-in-memblock.patch has style problems, please review. If any of these errors are false positives, please report them to the maintainer, see CHECKPATCH in MAINTAINERS. Please run checkpatch prior to sending patches Cc: Tang Chen <[email protected]> Cc: Zhang Yanfei <[email protected]> Signed-off-by: Andrew Morton <[email protected]>

[ Upstream commit ece6b0a ] Dave Jones reported the following bug: "When fed mangled socket data, rds will trust what userspace gives it, and tries to allocate enormous amounts of memory larger than what kmalloc can satisfy." WARNING: at mm/page_alloc.c:2393 __alloc_pages_nodemask+0xa0d/0xbe0() Hardware name: GA-MA78GM-S2H Modules linked in: vmw_vsock_vmci_transport vmw_vmci vsock fuse bnep dlci bridge 8021q garp stp mrp binfmt_misc l2tp_ppp l2tp_core rfcomm s Pid: 24652, comm: trinity-child2 Not tainted 3.8.0+ torvalds#65 Call Trace: [<ffffffff81044155>] warn_slowpath_common+0x75/0xa0 [<ffffffff8104419a>] warn_slowpath_null+0x1a/0x20 [<ffffffff811444ad>] __alloc_pages_nodemask+0xa0d/0xbe0 [<ffffffff8100a196>] ? native_sched_clock+0x26/0x90 [<ffffffff810b2128>] ? trace_hardirqs_off_caller+0x28/0xc0 [<ffffffff810b21cd>] ? trace_hardirqs_off+0xd/0x10 [<ffffffff811861f8>] alloc_pages_current+0xb8/0x180 [<ffffffff8113eaaa>] __get_free_pages+0x2a/0x80 [<ffffffff811934fe>] kmalloc_order_trace+0x3e/0x1a0 [<ffffffff81193955>] __kmalloc+0x2f5/0x3a0 [<ffffffff8104df0c>] ? local_bh_enable_ip+0x7c/0xf0 [<ffffffffa0401ab3>] rds_message_alloc+0x23/0xb0 [rds] [<ffffffffa04043a1>] rds_sendmsg+0x2b1/0x990 [rds] [<ffffffff810b21cd>] ? trace_hardirqs_off+0xd/0x10 [<ffffffff81564620>] sock_sendmsg+0xb0/0xe0 [<ffffffff810b2052>] ? get_lock_stats+0x22/0x70 [<ffffffff810b24be>] ? put_lock_stats.isra.23+0xe/0x40 [<ffffffff81567f30>] sys_sendto+0x130/0x180 [<ffffffff810b872d>] ? trace_hardirqs_on+0xd/0x10 [<ffffffff816c547b>] ? _raw_spin_unlock_irq+0x3b/0x60 [<ffffffff816cd767>] ? sysret_check+0x1b/0x56 [<ffffffff810b8695>] ? trace_hardirqs_on_caller+0x115/0x1a0 [<ffffffff81341d8e>] ? trace_hardirqs_on_thunk+0x3a/0x3f [<ffffffff816cd742>] system_call_fastpath+0x16/0x1b ---[ end trace eed6ae990d018c8b ]--- Reported-by: Dave Jones <[email protected]> Cc: Dave Jones <[email protected]> Cc: David S. Miller <[email protected]> Cc: Venkat Venkatsubra <[email protected]> Signed-off-by: Cong Wang <[email protected]> Acked-by: Venkat Venkatsubra <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

When allocating RX buffers a fixed size is used, while freeing is based on actually received bytes, resulting in the following kernel warning when CONFIG_DMA_API_DEBUG is enabled: WARNING: CPU: 0 PID: 0 at lib/dma-debug.c:1051 check_unmap+0x258/0x894() macb e000b000.ethernet: DMA-API: device driver frees DMA memory with different size [device address=0x000000002d170040] [map size=1536 bytes] [unmap size=60 bytes] Modules linked in: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.14.0-rc3-xilinx-00220-g49f84081ce4f #65 [<c001516c>] (unwind_backtrace) from [<c0011df8>] (show_stack+0x10/0x14) [<c0011df8>] (show_stack) from [<c03c775c>] (dump_stack+0x7c/0xc8) [<c03c775c>] (dump_stack) from [<c00245cc>] (warn_slowpath_common+0x60/0x84) [<c00245cc>] (warn_slowpath_common) from [<c0024670>] (warn_slowpath_fmt+0x2c/0x3c) [<c0024670>] (warn_slowpath_fmt) from [<c0227d44>] (check_unmap+0x258/0x894) [<c0227d44>] (check_unmap) from [<c0228588>] (debug_dma_unmap_page+0x64/0x70) [<c0228588>] (debug_dma_unmap_page) from [<c02ab78c>] (gem_rx+0x118/0x170) [<c02ab78c>] (gem_rx) from [<c02ac4d4>] (macb_poll+0x24/0x94) [<c02ac4d4>] (macb_poll) from [<c031222c>] (net_rx_action+0x6c/0x188) [<c031222c>] (net_rx_action) from [<c0028a28>] (__do_softirq+0x108/0x280) [<c0028a28>] (__do_softirq) from [<c0028e8c>] (irq_exit+0x84/0xf8) [<c0028e8c>] (irq_exit) from [<c000f360>] (handle_IRQ+0x68/0x8c) [<c000f360>] (handle_IRQ) from [<c0008528>] (gic_handle_irq+0x3c/0x60) [<c0008528>] (gic_handle_irq) from [<c0012904>] (__irq_svc+0x44/0x78) Exception stack(0xc056df20 to 0xc056df68) df20: 00000001 c0577430 00000000 c0577430 04ce8e0d 00000002 edfce238 00000000 df40: 04e20f78 00000002 c05981f4 00000000 00000008 c056df68 c0064008 c02d7658 df60: 20000013 ffffffff [<c0012904>] (__irq_svc) from [<c02d7658>] (cpuidle_enter_state+0x54/0xf8) [<c02d7658>] (cpuidle_enter_state) from [<c02d77dc>] (cpuidle_idle_call+0xe0/0x138) [<c02d77dc>] (cpuidle_idle_call) from [<c000f660>] (arch_cpu_idle+0x8/0x3c) [<c000f660>] (arch_cpu_idle) from [<c006bec4>] (cpu_startup_entry+0xbc/0x124) [<c006bec4>] (cpu_startup_entry) from [<c053daec>] (start_kernel+0x350/0x3b0) ---[ end trace d5fdc38641bd3a11 ]--- Mapped at: [<c0227184>] debug_dma_map_page+0x48/0x11c [<c02ab32c>] gem_rx_refill+0x154/0x1f8 [<c02ac7b4>] macb_open+0x270/0x3e0 [<c03152e0>] __dev_open+0x7c/0xfc [<c031554c>] __dev_change_flags+0x8c/0x140 Fixing this by passing the same size which is passed during mapping the memory to the unmap function as well. Signed-off-by: Soren Brinkmann <[email protected]> Reviewed-by: Ben Hutchings <[email protected]> Signed-off-by: David S. Miller <[email protected]>

[ Upstream commit ece6b0a ] Dave Jones reported the following bug: "When fed mangled socket data, rds will trust what userspace gives it, and tries to allocate enormous amounts of memory larger than what kmalloc can satisfy." WARNING: at mm/page_alloc.c:2393 __alloc_pages_nodemask+0xa0d/0xbe0() Hardware name: GA-MA78GM-S2H Modules linked in: vmw_vsock_vmci_transport vmw_vmci vsock fuse bnep dlci bridge 8021q garp stp mrp binfmt_misc l2tp_ppp l2tp_core rfcomm s Pid: 24652, comm: trinity-child2 Not tainted 3.8.0+ torvalds#65 Call Trace: [<ffffffff81044155>] warn_slowpath_common+0x75/0xa0 [<ffffffff8104419a>] warn_slowpath_null+0x1a/0x20 [<ffffffff811444ad>] __alloc_pages_nodemask+0xa0d/0xbe0 [<ffffffff8100a196>] ? native_sched_clock+0x26/0x90 [<ffffffff810b2128>] ? trace_hardirqs_off_caller+0x28/0xc0 [<ffffffff810b21cd>] ? trace_hardirqs_off+0xd/0x10 [<ffffffff811861f8>] alloc_pages_current+0xb8/0x180 [<ffffffff8113eaaa>] __get_free_pages+0x2a/0x80 [<ffffffff811934fe>] kmalloc_order_trace+0x3e/0x1a0 [<ffffffff81193955>] __kmalloc+0x2f5/0x3a0 [<ffffffff8104df0c>] ? local_bh_enable_ip+0x7c/0xf0 [<ffffffffa0401ab3>] rds_message_alloc+0x23/0xb0 [rds] [<ffffffffa04043a1>] rds_sendmsg+0x2b1/0x990 [rds] [<ffffffff810b21cd>] ? trace_hardirqs_off+0xd/0x10 [<ffffffff81564620>] sock_sendmsg+0xb0/0xe0 [<ffffffff810b2052>] ? get_lock_stats+0x22/0x70 [<ffffffff810b24be>] ? put_lock_stats.isra.23+0xe/0x40 [<ffffffff81567f30>] sys_sendto+0x130/0x180 [<ffffffff810b872d>] ? trace_hardirqs_on+0xd/0x10 [<ffffffff816c547b>] ? _raw_spin_unlock_irq+0x3b/0x60 [<ffffffff816cd767>] ? sysret_check+0x1b/0x56 [<ffffffff810b8695>] ? trace_hardirqs_on_caller+0x115/0x1a0 [<ffffffff81341d8e>] ? trace_hardirqs_on_thunk+0x3a/0x3f [<ffffffff816cd742>] system_call_fastpath+0x16/0x1b ---[ end trace eed6ae990d018c8b ]--- Reported-by: Dave Jones <[email protected]> Cc: Dave Jones <[email protected]> Cc: David S. Miller <[email protected]> Cc: Venkat Venkatsubra <[email protected]> Signed-off-by: Cong Wang <[email protected]> Acked-by: Venkat Venkatsubra <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Ben Hutchings <[email protected]>

[ Upstream commit ece6b0a ] Dave Jones reported the following bug: "When fed mangled socket data, rds will trust what userspace gives it, and tries to allocate enormous amounts of memory larger than what kmalloc can satisfy." WARNING: at mm/page_alloc.c:2393 __alloc_pages_nodemask+0xa0d/0xbe0() Hardware name: GA-MA78GM-S2H Modules linked in: vmw_vsock_vmci_transport vmw_vmci vsock fuse bnep dlci bridge 8021q garp stp mrp binfmt_misc l2tp_ppp l2tp_core rfcomm s Pid: 24652, comm: trinity-child2 Not tainted 3.8.0+ torvalds#65 Call Trace: [<ffffffff81044155>] warn_slowpath_common+0x75/0xa0 [<ffffffff8104419a>] warn_slowpath_null+0x1a/0x20 [<ffffffff811444ad>] __alloc_pages_nodemask+0xa0d/0xbe0 [<ffffffff8100a196>] ? native_sched_clock+0x26/0x90 [<ffffffff810b2128>] ? trace_hardirqs_off_caller+0x28/0xc0 [<ffffffff810b21cd>] ? trace_hardirqs_off+0xd/0x10 [<ffffffff811861f8>] alloc_pages_current+0xb8/0x180 [<ffffffff8113eaaa>] __get_free_pages+0x2a/0x80 [<ffffffff811934fe>] kmalloc_order_trace+0x3e/0x1a0 [<ffffffff81193955>] __kmalloc+0x2f5/0x3a0 [<ffffffff8104df0c>] ? local_bh_enable_ip+0x7c/0xf0 [<ffffffffa0401ab3>] rds_message_alloc+0x23/0xb0 [rds] [<ffffffffa04043a1>] rds_sendmsg+0x2b1/0x990 [rds] [<ffffffff810b21cd>] ? trace_hardirqs_off+0xd/0x10 [<ffffffff81564620>] sock_sendmsg+0xb0/0xe0 [<ffffffff810b2052>] ? get_lock_stats+0x22/0x70 [<ffffffff810b24be>] ? put_lock_stats.isra.23+0xe/0x40 [<ffffffff81567f30>] sys_sendto+0x130/0x180 [<ffffffff810b872d>] ? trace_hardirqs_on+0xd/0x10 [<ffffffff816c547b>] ? _raw_spin_unlock_irq+0x3b/0x60 [<ffffffff816cd767>] ? sysret_check+0x1b/0x56 [<ffffffff810b8695>] ? trace_hardirqs_on_caller+0x115/0x1a0 [<ffffffff81341d8e>] ? trace_hardirqs_on_thunk+0x3a/0x3f [<ffffffff816cd742>] system_call_fastpath+0x16/0x1b ---[ end trace eed6ae990d018c8b ]--- Reported-by: Dave Jones <[email protected]> Cc: Dave Jones <[email protected]> Cc: David S. Miller <[email protected]> Cc: Venkat Venkatsubra <[email protected]> Signed-off-by: Cong Wang <[email protected]> Acked-by: Venkat Venkatsubra <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

…try-checkpatch-fixes WARNING: Missing a blank line after declarations torvalds#65: FILE: mm/hugetlb.c:2593: + swp_entry_t swp_entry = pte_to_swp_entry(entry); + if (is_write_migration_entry(swp_entry) && cow) { total: 0 errors, 1 warnings, 90 lines checked ./patches/hugetlb-fix-copy_hugetlb_page_range-to-handle-migration-hwpoisoned-entry.patch has style problems, please review. If any of these errors are false positives, please report them to the maintainer, see CHECKPATCH in MAINTAINERS. Please run checkpatch prior to sending patches Cc: Naoya Horiguchi <[email protected]> Signed-off-by: Andrew Morton <[email protected]>

…eckpatch-fixes WARNING: Missing a blank line after declarations torvalds#65: FILE: arch/x86/mm/numa.c:480: + struct numa_memblk *mb = &numa_meminfo.blk[i]; + memblock_set_node(mb->start, mb->end - mb->start, total: 0 errors, 1 warnings, 112 lines checked ./patches/mem-hotplug-fix-boot-failed-in-case-all-the-nodes-are-hotpluggable.patch has style problems, please review. If any of these errors are false positives, please report them to the maintainer, see CHECKPATCH in MAINTAINERS. Please run checkpatch prior to sending patches Cc: Xishi Qiu <[email protected]> Signed-off-by: Andrew Morton <[email protected]>

…ixes WARNING: Missing a blank line after declarations torvalds#65: FILE: mm/compaction.c:1243: + unsigned long free_pfn = release_freepages(&cc->freepages); + cc->nr_freepages = 0; total: 0 errors, 1 warnings, 47 lines checked ./patches/mm-compaction-always-update-cached-scanner-positions-fix.patch has style problems, please review. If any of these errors are false positives, please report them to the maintainer, see CHECKPATCH in MAINTAINERS. Please run checkpatch prior to sending patches Cc: Vlastimil Babka <[email protected]> Signed-off-by: Andrew Morton <[email protected]>

A malicious signal handler / restorer can DOS the system by fudging the user regs saved on stack, causing weird things such as sigreturn returning to user mode PC but cpu state still being kernel mode.... Ensure that in sigreturn path status32 always has U bit; any other bogosity (gargbage PC etc) will be taken care of by normal user mode exceptions mechanisms. Reproducer signal handler: void handle_sig(int signo, siginfo_t *info, void *context) { ucontext_t *uc = context; struct user_regs_struct *regs = &(uc->uc_mcontext.regs); regs->scratch.status32 = 0; } Before the fix, kernel would go off to weeds like below: --------->8----------- [ARCLinux]$ ./signal-test Path: /signal-test CPU: 0 PID: 61 Comm: signal-test Not tainted 4.0.0-rc5+ #65 task: 8f177880 ti: 5ffe6000 task.ti: 8f15c000 [ECR ]: 0x00220200 => Invalid Write @ 0x00000010 by insn @ 0x00010698 [EFA ]: 0x00000010 [BLINK ]: 0x2007c1ee [ERET ]: 0x10698 [STAT32]: 0x00000000 : <-------- BTA: 0x00010680 SP: 0x5ffe7e48 FP: 0x00000000 LPS: 0x20003c6c LPE: 0x20003c70 LPC: 0x00000000 ... --------->8----------- Reported-by: Alexey Brodkin <[email protected]> Cc: <[email protected]> Signed-off-by: Vineet Gupta <[email protected]>

[ Upstream commit 230db82 ] When a console stack dump is initiated with CONFIG_GCOV_PROFILE_ALL enabled, show_trace_log_lvl() gets out of sync with the ORC unwinder, causing the stack trace to show all text addresses as unreliable: # echo l > /proc/sysrq-trigger [ 477.521031] sysrq: Show backtrace of all active CPUs [ 477.523813] NMI backtrace for cpu 0 [ 477.524492] CPU: 0 PID: 1021 Comm: bash Not tainted 6.0.0 torvalds#65 [ 477.525295] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.0-1.fc36 04/01/2014 [ 477.526439] Call Trace: [ 477.526854] <TASK> [ 477.527216] ? dump_stack_lvl+0xc7/0x114 [ 477.527801] ? dump_stack+0x13/0x1f [ 477.528331] ? nmi_cpu_backtrace.cold+0xb5/0x10d [ 477.528998] ? lapic_can_unplug_cpu+0xa0/0xa0 [ 477.529641] ? nmi_trigger_cpumask_backtrace+0x16a/0x1f0 [ 477.530393] ? arch_trigger_cpumask_backtrace+0x1d/0x30 [ 477.531136] ? sysrq_handle_showallcpus+0x1b/0x30 [ 477.531818] ? __handle_sysrq.cold+0x4e/0x1ae [ 477.532451] ? write_sysrq_trigger+0x63/0x80 [ 477.533080] ? proc_reg_write+0x92/0x110 [ 477.533663] ? vfs_write+0x174/0x530 [ 477.534265] ? handle_mm_fault+0x16f/0x500 [ 477.534940] ? ksys_write+0x7b/0x170 [ 477.535543] ? __x64_sys_write+0x1d/0x30 [ 477.536191] ? do_syscall_64+0x6b/0x100 [ 477.536809] ? entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 477.537609] </TASK> This happens when the compiled code for show_stack() has a single word on the stack, and doesn't use a tail call to show_stack_log_lvl(). (CONFIG_GCOV_PROFILE_ALL=y is the only known case of this.) Then the __unwind_start() skip logic hits an off-by-one bug and fails to unwind all the way to the intended starting frame. Fix it by reverting the following commit: f1d9a2a ("x86/unwind/orc: Don't skip the first frame for inactive tasks") The original justification for that commit no longer exists. That original issue was later fixed in a different way, with the following commit: f2ac57a ("x86/unwind/orc: Fix inactive tasks with stack pointer in %sp on GCC 10 compiled kernels") Fixes: f1d9a2a ("x86/unwind/orc: Don't skip the first frame for inactive tasks") Signed-off-by: Chen Zhongjin <[email protected]> [jpoimboe: rewrite commit log] Signed-off-by: Josh Poimboeuf <[email protected]> Signed-off-by: Peter Zijlstra <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

If we bring up secondaries in parallel they might get confused unless we impose some ordering here: [ 1.360149] x86: Booting SMP configuration: [ 1.360221] .... node #0, CPUs: #1 #2 #3 #4 #5 torvalds#6 torvalds#7 torvalds#8 torvalds#9 torvalds#10 torvalds#11 torvalds#12 torvalds#13 torvalds#14 torvalds#15 torvalds#16 torvalds#17 torvalds#18 torvalds#19 torvalds#20 torvalds#21 torvalds#22 torvalds#23 [ 1.366225] .... node #1, CPUs: torvalds#24 torvalds#25 torvalds#26 torvalds#27 torvalds#28 torvalds#29 torvalds#30 torvalds#31 torvalds#32 torvalds#33 torvalds#34 torvalds#35 torvalds#36 torvalds#37 torvalds#38 torvalds#39 torvalds#40 torvalds#41 torvalds#42 torvalds#43 torvalds#44 torvalds#45 torvalds#46 torvalds#47 [ 1.370219] .... node #0, CPUs: torvalds#48 torvalds#49 torvalds#50 torvalds#51 #52 #53 torvalds#54 torvalds#55 torvalds#56 torvalds#57 #58 torvalds#59 torvalds#60 torvalds#61 torvalds#62 torvalds#63 torvalds#64 torvalds#65 torvalds#66 torvalds#67 torvalds#68 torvalds#69 #70 torvalds#71 [ 1.378226] .... node #1, CPUs: torvalds#72 torvalds#73 torvalds#74 torvalds#75 torvalds#76 torvalds#77 torvalds#78 torvalds#79 torvalds#80 torvalds#81 torvalds#82 torvalds#83 torvalds#84 torvalds#85 torvalds#86 torvalds#87 torvalds#88 torvalds#89 torvalds#90 torvalds#91 torvalds#92 torvalds#93 torvalds#94 torvalds#95 [ 1.382037] Brought 96 CPUs to x86/cpu:kick in 72232606 cycles [ 0.104104] smpboot: CPU 26 Converting physical 0 to logical die 1 [ 0.104104] smpboot: CPU 27 Converting physical 1 to logical package 2 [ 0.104104] smpboot: CPU 24 Converting physical 1 to logical package 3 [ 0.104104] smpboot: CPU 27 Converting physical 0 to logical die 2 [ 0.104104] smpboot: CPU 25 Converting physical 1 to logical package 4 [ 1.385609] Brought 96 CPUs to x86/cpu:wait-init in 9269218 cycles [ 1.395285] Brought CPUs online in 28930764 cycles [ 1.395469] smp: Brought up 2 nodes, 96 CPUs [ 1.395689] smpboot: Max logical packages: 2 [ 1.396222] smpboot: Total of 96 processors activated (576000.00 BogoMIPS) Do the full topology update in smp_store_cpu_info() under a spinlock to ensure that things remain consistent. [Usama Arif: fixed rebase conflict] Signed-off-by: David Woodhouse <[email protected]> Signed-off-by: Usama Arif <[email protected]> Signed-off-by: Paul E. McKenney <[email protected]>

The toplogy update is performed by the AP via smp_callin() after the BSP has called do_wait_cpu_initialized(), setting the AP's bit in cpu_callout_mask to allow it to proceed. In preparation to enable further parallelism of AP bringup, add locking to serialize the update even if multiple APs are (in future) permitted to proceed through the next stages of bringup in parallel. Without such ordering (and with that future extra parallelism), confusion ensues: [ 1.360149] x86: Booting SMP configuration: [ 1.360221] .... node #0, CPUs: #1 #2 #3 #4 #5 torvalds#6 torvalds#7 torvalds#8 torvalds#9 torvalds#10 torvalds#11 torvalds#12 torvalds#13 torvalds#14 torvalds#15 torvalds#16 torvalds#17 torvalds#18 torvalds#19 torvalds#20 torvalds#21 torvalds#22 torvalds#23 [ 1.366225] .... node #1, CPUs: torvalds#24 torvalds#25 torvalds#26 torvalds#27 torvalds#28 torvalds#29 torvalds#30 torvalds#31 torvalds#32 torvalds#33 torvalds#34 torvalds#35 torvalds#36 torvalds#37 torvalds#38 torvalds#39 torvalds#40 torvalds#41 torvalds#42 torvalds#43 torvalds#44 torvalds#45 torvalds#46 torvalds#47 [ 1.370219] .... node #0, CPUs: torvalds#48 torvalds#49 torvalds#50 torvalds#51 #52 #53 torvalds#54 torvalds#55 torvalds#56 torvalds#57 #58 torvalds#59 torvalds#60 torvalds#61 torvalds#62 torvalds#63 torvalds#64 torvalds#65 torvalds#66 torvalds#67 torvalds#68 torvalds#69 #70 torvalds#71 [ 1.378226] .... node #1, CPUs: torvalds#72 torvalds#73 torvalds#74 torvalds#75 torvalds#76 torvalds#77 torvalds#78 torvalds#79 torvalds#80 torvalds#81 torvalds#82 torvalds#83 torvalds#84 torvalds#85 torvalds#86 torvalds#87 torvalds#88 torvalds#89 torvalds#90 torvalds#91 torvalds#92 torvalds#93 torvalds#94 torvalds#95 [ 1.382037] Brought 96 CPUs to x86/cpu:kick in 72232606 cycles [ 0.104104] smpboot: CPU 26 Converting physical 0 to logical die 1 [ 0.104104] smpboot: CPU 27 Converting physical 1 to logical package 2 [ 0.104104] smpboot: CPU 24 Converting physical 1 to logical package 3 [ 0.104104] smpboot: CPU 27 Converting physical 0 to logical die 2 [ 0.104104] smpboot: CPU 25 Converting physical 1 to logical package 4 [ 1.385609] Brought 96 CPUs to x86/cpu:wait-init in 9269218 cycles [ 1.395285] Brought CPUs online in 28930764 cycles [ 1.395469] smp: Brought up 2 nodes, 96 CPUs [ 1.395689] smpboot: Max logical packages: 2 [ 1.396222] smpboot: Total of 96 processors activated (576000.00 BogoMIPS) [Usama Arif: fixed rebase conflict] Signed-off-by: David Woodhouse <[email protected]> Signed-off-by: Usama Arif <[email protected]> Signed-off-by: Paul E. McKenney <[email protected]>

The toplogy update is performed by the AP via smp_callin() after the BSP has called do_wait_cpu_initialized(), setting the AP's bit in cpu_callout_mask to allow it to proceed. In preparation to enable further parallelism of AP bringup, add locking to serialize the update even if multiple APs are (in future) permitted to proceed through the next stages of bringup in parallel. Without such ordering (and with that future extra parallelism), confusion ensues: [ 1.360149] x86: Booting SMP configuration: [ 1.360221] .... node #0, CPUs: #1 #2 #3 #4 #5 torvalds#6 torvalds#7 torvalds#8 torvalds#9 torvalds#10 torvalds#11 torvalds#12 torvalds#13 torvalds#14 torvalds#15 torvalds#16 torvalds#17 torvalds#18 torvalds#19 torvalds#20 torvalds#21 torvalds#22 torvalds#23 [ 1.366225] .... node #1, CPUs: torvalds#24 torvalds#25 torvalds#26 torvalds#27 torvalds#28 torvalds#29 torvalds#30 torvalds#31 torvalds#32 torvalds#33 torvalds#34 torvalds#35 torvalds#36 torvalds#37 torvalds#38 torvalds#39 torvalds#40 torvalds#41 torvalds#42 torvalds#43 torvalds#44 torvalds#45 torvalds#46 torvalds#47 [ 1.370219] .... node #0, CPUs: torvalds#48 torvalds#49 torvalds#50 torvalds#51 #52 #53 torvalds#54 torvalds#55 torvalds#56 torvalds#57 #58 torvalds#59 torvalds#60 torvalds#61 torvalds#62 torvalds#63 torvalds#64 torvalds#65 torvalds#66 torvalds#67 torvalds#68 torvalds#69 #70 torvalds#71 [ 1.378226] .... node #1, CPUs: torvalds#72 torvalds#73 torvalds#74 torvalds#75 torvalds#76 torvalds#77 torvalds#78 torvalds#79 torvalds#80 torvalds#81 torvalds#82 torvalds#83 torvalds#84 torvalds#85 torvalds#86 torvalds#87 torvalds#88 torvalds#89 torvalds#90 torvalds#91 torvalds#92 torvalds#93 torvalds#94 torvalds#95 [ 1.382037] Brought 96 CPUs to x86/cpu:kick in 72232606 cycles [ 0.104104] smpboot: CPU 26 Converting physical 0 to logical die 1 [ 0.104104] smpboot: CPU 27 Converting physical 1 to logical package 2 [ 0.104104] smpboot: CPU 24 Converting physical 1 to logical package 3 [ 0.104104] smpboot: CPU 27 Converting physical 0 to logical die 2 [ 0.104104] smpboot: CPU 25 Converting physical 1 to logical package 4 [ 1.385609] Brought 96 CPUs to x86/cpu:wait-init in 9269218 cycles [ 1.395285] Brought CPUs online in 28930764 cycles [ 1.395469] smp: Brought up 2 nodes, 96 CPUs [ 1.395689] smpboot: Max logical packages: 2 [ 1.396222] smpboot: Total of 96 processors activated (576000.00 BogoMIPS) [Usama Arif: fixed rebase conflict] Signed-off-by: David Woodhouse <[email protected]> Signed-off-by: Usama Arif <[email protected]>

With latest llvm17, dynptr/test_dynptr_is_null subtest failed in my testing VM. The failure log looks like below: All error logs: tester_init:PASS:tester_log_buf 0 nsec process_subtest:PASS:obj_open_mem 0 nsec process_subtest:PASS:Can't alloc specs array 0 nsec verify_success:PASS:dynptr_success__open 0 nsec verify_success:PASS:bpf_object__find_program_by_name 0 nsec verify_success:PASS:dynptr_success__load 0 nsec verify_success:PASS:bpf_program__attach 0 nsec verify_success:FAIL:err unexpected err: actual 4 != expected 0 torvalds#65/9 dynptr/test_dynptr_is_null:FAIL The error happens for bpf prog test_dynptr_is_null in dynptr_success.c. if (bpf_dynptr_is_null(&ptr2)) { err = 4; goto exit; } The bpf_dynptr_is_null(&ptr) unexpectedly returned a non-zero value and the control went to the error path. Digging further, I found the root cause is due to function signature difference between kernel and user space. In kernel, we have __bpf_kfunc bool bpf_dynptr_is_null(struct bpf_dynptr_kern *ptr) while in bpf_kfuncs.h we have extern int bpf_dynptr_is_null(const struct bpf_dynptr *ptr) __ksym; The kernel bpf_dynptr_is_null disasm code: ffffffff812f1a90 <bpf_dynptr_is_null>: ffffffff812f1a90: f3 0f 1e fa endbr64 ffffffff812f1a94: 0f 1f 44 00 00 nopl (%rax,%rax) ffffffff812f1a99: 53 pushq %rbx ffffffff812f1a9a: 48 89 fb movq %rdi, %rbx ffffffff812f1a9d: e8 ae 29 17 00 callq 0xffffffff81464450 <__asan_load8_noabort> ffffffff812f1aa2: 48 83 3b 00 cmpq $0x0, (%rbx) ffffffff812f1aa6: 0f 94 c0 sete %al ffffffff812f1aa9: 5b popq %rbx ffffffff812f1aaa: c3 retq Note that only 1-byte register %al is set and the other 7-bytes are not touched. In bpf program, the asm code for the above bpf_dynptr_is_null(&ptr2): 266: 85 10 00 00 ff ff ff ff call -0x1 267: b4 01 00 00 04 00 00 00 w1 = 0x4 268: 16 00 03 00 00 00 00 00 if w0 == 0x0 goto +0x3 <LBB9_8> Basically, 4-byte subregister is tested. This might cause error as the value other than the lowest byte might not be 0. This patch fixed the issue by using the identical func prototype across kernel and selftest user space. The fixed bpf asm code: 267: 85 10 00 00 ff ff ff ff call -0x1 268: 54 00 00 00 01 00 00 00 w0 &= 0x1 269: b4 01 00 00 04 00 00 00 w1 = 0x4 270: 16 00 03 00 00 00 00 00 if w0 == 0x0 goto +0x3 <LBB9_8> Signed-off-by: Yonghong Song <[email protected]>

With latest llvm17, dynptr/test_dynptr_is_null subtest failed in my testing VM. The failure log looks like below: All error logs: tester_init:PASS:tester_log_buf 0 nsec process_subtest:PASS:obj_open_mem 0 nsec process_subtest:PASS:Can't alloc specs array 0 nsec verify_success:PASS:dynptr_success__open 0 nsec verify_success:PASS:bpf_object__find_program_by_name 0 nsec verify_success:PASS:dynptr_success__load 0 nsec verify_success:PASS:bpf_program__attach 0 nsec verify_success:FAIL:err unexpected err: actual 4 != expected 0 torvalds#65/9 dynptr/test_dynptr_is_null:FAIL The error happens for bpf prog test_dynptr_is_null in dynptr_success.c: if (bpf_dynptr_is_null(&ptr2)) { err = 4; goto exit; } The bpf_dynptr_is_null(&ptr) unexpectedly returned a non-zero value and the control went to the error path. Digging further, I found the root cause is due to function signature difference between kernel and user space. In kernel, we have ... __bpf_kfunc bool bpf_dynptr_is_null(struct bpf_dynptr_kern *ptr) ... while in bpf_kfuncs.h we have: extern int bpf_dynptr_is_null(const struct bpf_dynptr *ptr) __ksym; The kernel bpf_dynptr_is_null disasm code: ffffffff812f1a90 <bpf_dynptr_is_null>: ffffffff812f1a90: f3 0f 1e fa endbr64 ffffffff812f1a94: 0f 1f 44 00 00 nopl (%rax,%rax) ffffffff812f1a99: 53 pushq %rbx ffffffff812f1a9a: 48 89 fb movq %rdi, %rbx ffffffff812f1a9d: e8 ae 29 17 00 callq 0xffffffff81464450 <__asan_load8_noabort> ffffffff812f1aa2: 48 83 3b 00 cmpq $0x0, (%rbx) ffffffff812f1aa6: 0f 94 c0 sete %al ffffffff812f1aa9: 5b popq %rbx ffffffff812f1aaa: c3 retq Note that only 1-byte register %al is set and the other 7-bytes are not touched. In bpf program, the asm code for the above bpf_dynptr_is_null(&ptr2): 266: 85 10 00 00 ff ff ff ff call -0x1 267: b4 01 00 00 04 00 00 00 w1 = 0x4 268: 16 00 03 00 00 00 00 00 if w0 == 0x0 goto +0x3 <LBB9_8> Basically, 4-byte subregister is tested. This might cause error as the value other than the lowest byte might not be 0. This patch fixed the issue by using the identical func prototype across kernel and selftest user space. The fixed bpf asm code: 267: 85 10 00 00 ff ff ff ff call -0x1 268: 54 00 00 00 01 00 00 00 w0 &= 0x1 269: b4 01 00 00 04 00 00 00 w1 = 0x4 270: 16 00 03 00 00 00 00 00 if w0 == 0x0 goto +0x3 <LBB9_8> Signed-off-by: Yonghong Song <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]

For this case, the weight might be 0, so can't do transmit. This patch can solve following ussue: [ 60.737783][ T147] rk_gmac-dwmac fe1b0000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 60.737877][ T147] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 65.829085][ C5] ------------[ cut here ]------------ [ 65.829150][ C5] NETDEV WATCHDOG: eth0 (rk_gmac-dwmac): transmit queue 0 timed out [ 65.829252][ C5] WARNING: CPU: 5 PID: 0 at net/sched/sch_generic.c:526 dev_watchdog+0x208/0x228 [ 65.829294][ C5] Modules linked in: bcmdhd dhd_static_buf r8168 [ 65.829329][ C5] CPU: 5 PID: 0 Comm: swapper/5 Not tainted 6.1.25 torvalds#65 [ 65.829350][ C5] Hardware name: Rockchip RK3588 EVB1 LP4 V10 Board (DT) [ 65.829365][ C5] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 65.829386][ C5] pc : dev_watchdog+0x208/0x228 [ 65.829410][ C5] lr : dev_watchdog+0x208/0x228 [ 65.829432][ C5] sp : ffffffc00a203e10 [ 65.829446][ C5] x29: ffffffc00a203e10 x28: dead000000000122 x27: 0000000000000000 [ 65.829474][ C5] x26: ffffffc00a203ea0 x25: 0000000000000001 x24: ffffff82f6dadfb0 [ 65.829498][ C5] x23: ffffffc009cc6000 x22: 0000000000000000 x21: ffffff810111039c [ 65.829520][ C5] x20: ffffff8101110000 x19: ffffff8101110448 x18: ffffffc00a1ed030 [ 65.829542][ C5] x17: 756f2064656d6974 x16: ffffffffffffffff x15: 0000000000000004 [ 65.829564][ C5] x14: ffffffc009d4d360 x13: 0000000000003fff x12: 0000000000000003 [ 65.829586][ C5] x11: 00000000ffffbfff x10: c0000000ffffbfff x9 : 242a4f7b9d363e00 [ 65.829610][ C5] x8 : 242a4f7b9d363e00 x7 : 205b5d3035313932 x6 : 382e35362020205b [ 65.829631][ C5] x5 : ffffffc00a16e61f x4 : ffffffc00a203b47 x3 : 0000000000000000 [ 65.829652][ C5] x2 : 0000000000000000 x1 : ffffffc00a203bb0 x0 : 0000000000000041 [ 65.829675][ C5] Call trace: [ 65.829687][ C5] dev_watchdog+0x208/0x228 [ 65.829711][ C5] call_timer_fn+0x34/0x208 [ 65.829738][ C5] __run_timers+0x1a8/0x2dc [ 65.829760][ C5] run_timer_softirq+0x24/0x48 [ 65.829783][ C5] _stext+0xe0/0x388 [ 65.829803][ C5] ____do_softirq+0x10/0x1c [ 65.829824][ C5] call_on_irq_stack+0x40/0x58 [ 65.829844][ C5] do_softirq_own_stack+0x1c/0x28 [ 65.829865][ C5] __irq_exit_rcu+0x98/0xec [ 65.829885][ C5] irq_exit_rcu+0x10/0x1c [ 65.829903][ C5] el1_interrupt+0xa0/0x170 [ 65.829929][ C5] el1h_64_irq_handler+0x18/0x24 [ 65.829951][ C5] el1h_64_irq+0x78/0x7c [ 65.829968][ C5] cpuidle_enter_state+0x17c/0x440 [ 65.829993][ C5] cpuidle_enter+0x38/0x50 [ 65.830014][ C5] do_idle+0x1ec/0x2c0 [ 65.830034][ C5] cpu_startup_entry+0x24/0x28 [ 65.830052][ C5] secondary_start_kernel+0x12c/0x1a8 [ 65.830074][ C5] __secondary_switched+0x68/0x6c Signed-off-by: David Wu <[email protected]> Change-Id: I56bf8cfc9bf07b3bc13356ca7b3fe4cb48065d78

sched_ext: Add scx_layered

Within the BPF program, we leverage the cgroup iterator to iterate through percpu runqueue data, specifically the 'nr_running' metric. Subsequently we expose this data to userspace by means of a sequence file. The CPU affinity for the cpumask is determined by the PID of a task: - PID of the init task (PID 1) We typically don't set CPU affinity for init task and thus we can iterate across all possible CPUs using the init task. However, in scenarios where you've set CPU affinity for the init task, you should set your current-task's cpu affinity to all possible CPUs and then proceed to iterate through all possible CPUs using the current task. - PID of a task with defined CPU affinity The aim here is to iterate through a specific cpumask. This scenario aligns with tasks residing within a cpuset cgroup. - Invalid PID (e.g., PID -1) No cpumask is available in this case. The result as follows, torvalds#65/1 cpumask_iter/init_pid:OK torvalds#65/2 cpumask_iter/invalid_pid:OK torvalds#65/3 cpumask_iter/self_pid_one_cpu:OK torvalds#65/4 cpumask_iter/self_pid_multi_cpus:OK torvalds#65 cpumask_iter:OK Summary: 1/4 PASSED, 0 SKIPPED, 0 FAILED CONFIG_PSI=y is required for this testcase. Signed-off-by: Yafang Shao <[email protected]>

KSAN calls into rcu code which then triggers a write that reenters into KSAN getting the system stuck doing infinite recursion. #0 kmsan_get_context () at mm/kmsan/kmsan.h:106 #1 __msan_get_context_state () at mm/kmsan/instrumentation.c:331 #2 0xffffffff81495671 in get_current () at ./arch/x86/include/asm/current.h:42 #3 rcu_preempt_read_enter () at kernel/rcu/tree_plugin.h:379 #4 __rcu_read_lock () at kernel/rcu/tree_plugin.h:402 #5 0xffffffff81b2054b in rcu_read_lock () at ./include/linux/rcupdate.h:748 torvalds#6 pfn_valid (pfn=<optimized out>) at ./include/linux/mmzone.h:2016 torvalds#7 kmsan_virt_addr_valid (addr=addr@entry=0xffffffff8620d974 <init_task+1012>) at ./arch/x86/include/asm/kmsan.h:82 torvalds#8 virt_to_page_or_null (vaddr=vaddr@entry=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/shadow.c:75 torvalds#9 0xffffffff81b2023c in kmsan_get_metadata (address=0xffffffff8620d974 <init_task+1012>, is_origin=false) at mm/kmsan/shadow.c:143 torvalds#10 kmsan_get_shadow_origin_ptr (address=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/shadow.c:97 torvalds#11 0xffffffff81b1dbd2 in get_shadow_origin_ptr (addr=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/instrumentation.c:36 torvalds#12 __msan_metadata_ptr_for_load_4 (addr=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/instrumentation.c:91 torvalds#13 0xffffffff8149568f in rcu_preempt_read_enter () at kernel/rcu/tree_plugin.h:379 torvalds#14 __rcu_read_lock () at kernel/rcu/tree_plugin.h:402 torvalds#15 0xffffffff81b2054b in rcu_read_lock () at ./include/linux/rcupdate.h:748 torvalds#16 pfn_valid (pfn=<optimized out>) at ./include/linux/mmzone.h:2016 torvalds#17 kmsan_virt_addr_valid (addr=addr@entry=0xffffffff8620d974 <init_task+1012>) at ./arch/x86/include/asm/kmsan.h:82 torvalds#18 virt_to_page_or_null (vaddr=vaddr@entry=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/shadow.c:75 torvalds#19 0xffffffff81b2023c in kmsan_get_metadata (address=0xffffffff8620d974 <init_task+1012>, is_origin=false) at mm/kmsan/shadow.c:143 torvalds#20 kmsan_get_shadow_origin_ptr (address=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/shadow.c:97 torvalds#21 0xffffffff81b1dbd2 in get_shadow_origin_ptr (addr=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/instrumentation.c:36 torvalds#22 __msan_metadata_ptr_for_load_4 (addr=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/instrumentation.c:91 torvalds#23 0xffffffff8149568f in rcu_preempt_read_enter () at kernel/rcu/tree_plugin.h:379 torvalds#24 __rcu_read_lock () at kernel/rcu/tree_plugin.h:402 torvalds#25 0xffffffff81b2054b in rcu_read_lock () at ./include/linux/rcupdate.h:748 torvalds#26 pfn_valid (pfn=<optimized out>) at ./include/linux/mmzone.h:2016 torvalds#27 kmsan_virt_addr_valid (addr=addr@entry=0xffffffff8620d974 <init_task+1012>) at ./arch/x86/include/asm/kmsan.h:82 torvalds#28 virt_to_page_or_null (vaddr=vaddr@entry=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/shadow.c:75 torvalds#29 0xffffffff81b2023c in kmsan_get_metadata (address=0xffffffff8620d974 <init_task+1012>, is_origin=false) at mm/kmsan/shadow.c:143 torvalds#30 kmsan_get_shadow_origin_ptr (address=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/shadow.c:97 torvalds#31 0xffffffff81b1dbd2 in get_shadow_origin_ptr (addr=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/instrumentation.c:36 torvalds#32 __msan_metadata_ptr_for_load_4 (addr=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/instrumentation.c:91 torvalds#33 0xffffffff8149568f in rcu_preempt_read_enter () at kernel/rcu/tree_plugin.h:379 torvalds#34 __rcu_read_lock () at kernel/rcu/tree_plugin.h:402 torvalds#35 0xffffffff81b2054b in rcu_read_lock () at ./include/linux/rcupdate.h:748 torvalds#36 pfn_valid (pfn=<optimized out>) at ./include/linux/mmzone.h:2016 torvalds#37 kmsan_virt_addr_valid (addr=addr@entry=0xffffffff8620d974 <init_task+1012>) at ./arch/x86/include/asm/kmsan.h:82 torvalds#38 virt_to_page_or_null (vaddr=vaddr@entry=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/shadow.c:75 torvalds#39 0xffffffff81b2023c in kmsan_get_metadata (address=0xffffffff8620d974 <init_task+1012>, is_origin=false) at mm/kmsan/shadow.c:143 torvalds#40 kmsan_get_shadow_origin_ptr (address=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/shadow.c:97 torvalds#41 0xffffffff81b1dbd2 in get_shadow_origin_ptr (addr=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/instrumentation.c:36 torvalds#42 __msan_metadata_ptr_for_load_4 (addr=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/instrumentation.c:91 torvalds#43 0xffffffff8149568f in rcu_preempt_read_enter () at kernel/rcu/tree_plugin.h:379 torvalds#44 __rcu_read_lock () at kernel/rcu/tree_plugin.h:402 torvalds#45 0xffffffff81b2054b in rcu_read_lock () at ./include/linux/rcupdate.h:748 torvalds#46 pfn_valid (pfn=<optimized out>) at ./include/linux/mmzone.h:2016 torvalds#47 kmsan_virt_addr_valid (addr=addr@entry=0xffffffff8620d974 <init_task+1012>) at ./arch/x86/include/asm/kmsan.h:82 torvalds#48 virt_to_page_or_null (vaddr=vaddr@entry=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/shadow.c:75 torvalds#49 0xffffffff81b2023c in kmsan_get_metadata (address=0xffffffff8620d974 <init_task+1012>, is_origin=false) at mm/kmsan/shadow.c:143 torvalds#50 kmsan_get_shadow_origin_ptr (address=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/shadow.c:97 torvalds#51 0xffffffff81b1dbd2 in get_shadow_origin_ptr (addr=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/instrumentation.c:36 #52 __msan_metadata_ptr_for_load_4 (addr=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/instrumentation.c:91 #53 0xffffffff8149568f in rcu_preempt_read_enter () at kernel/rcu/tree_plugin.h:379 torvalds#54 __rcu_read_lock () at kernel/rcu/tree_plugin.h:402 torvalds#55 0xffffffff81b2054b in rcu_read_lock () at ./include/linux/rcupdate.h:748 torvalds#56 pfn_valid (pfn=<optimized out>) at ./include/linux/mmzone.h:2016 torvalds#57 kmsan_virt_addr_valid (addr=addr@entry=0xffffffff8620d974 <init_task+1012>) at ./arch/x86/include/asm/kmsan.h:82 #58 virt_to_page_or_null (vaddr=vaddr@entry=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/shadow.c:75 torvalds#59 0xffffffff81b2023c in kmsan_get_metadata (address=0xffffffff8620d974 <init_task+1012>, is_origin=false) at mm/kmsan/shadow.c:143 torvalds#60 kmsan_get_shadow_origin_ptr (address=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/shadow.c:97 torvalds#61 0xffffffff81b1dbd2 in get_shadow_origin_ptr (addr=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/instrumentation.c:36 torvalds#62 __msan_metadata_ptr_for_load_4 (addr=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/instrumentation.c:91 torvalds#63 0xffffffff8149568f in rcu_preempt_read_enter () at kernel/rcu/tree_plugin.h:379 torvalds#64 __rcu_read_lock () at kernel/rcu/tree_plugin.h:402 torvalds#65 0xffffffff81b2054b in rcu_read_lock () at ./include/linux/rcupdate.h:748 torvalds#66 pfn_valid (pfn=<optimized out>) at ./include/linux/mmzone.h:2016 torvalds#67 kmsan_virt_addr_valid (addr=addr@entry=0xffffffff8620d974 <init_task+1012>) at ./arch/x86/include/asm/kmsan.h:82 torvalds#68 virt_to_page_or_null (vaddr=vaddr@entry=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/shadow.c:75 torvalds#69 0xffffffff81b2023c in kmsan_get_metadata (address=0xffffffff8620d974 <init_task+1012>, is_origin=false) at mm/kmsan/shadow.c:143 #70 kmsan_get_shadow_origin_ptr (address=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/shadow.c:97 torvalds#71 0xffffffff81b1dbd2 in get_shadow_origin_ptr (addr=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/instrumentation.c:36 torvalds#72 __msan_metadata_ptr_for_load_4 (addr=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/instrumentation.c:91 torvalds#73 0xffffffff8149568f in rcu_preempt_read_enter () at kernel/rcu/tree_plugin.h:379 torvalds#74 __rcu_read_lock () at kernel/rcu/tree_plugin.h:402 torvalds#75 0xffffffff81b2054b in rcu_read_lock () at ./include/linux/rcupdate.h:748 torvalds#76 pfn_valid (pfn=<optimized out>) at ./include/linux/mmzone.h:2016 torvalds#77 kmsan_virt_addr_valid (addr=addr@entry=0xffffffff86203c90) at ./arch/x86/include/asm/kmsan.h:82 torvalds#78 virt_to_page_or_null (vaddr=vaddr@entry=0xffffffff86203c90) at mm/kmsan/shadow.c:75 torvalds#79 0xffffffff81b2023c in kmsan_get_metadata (address=0xffffffff86203c90, is_origin=false) at mm/kmsan/shadow.c:143 torvalds#80 kmsan_get_shadow_origin_ptr (address=0xffffffff86203c90, size=8, store=false) at mm/kmsan/shadow.c:97 torvalds#81 0xffffffff81b1dc72 in get_shadow_origin_ptr (addr=0xffffffff8620d974 <init_task+1012>, size=8, store=false) at mm/kmsan/instrumentation.c:36 torvalds#82 __msan_metadata_ptr_for_load_8 (addr=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/instrumentation.c:92 torvalds#83 0xffffffff814fdb9e in filter_irq_stacks (entries=<optimized out>, nr_entries=4) at kernel/stacktrace.c:397 torvalds#84 0xffffffff829520e8 in stack_depot_save_flags (entries=0xffffffff8620d974 <init_task+1012>, nr_entries=4, alloc_flags=0, depot_flags=0) at lib/stackdepot.c:500 torvalds#85 0xffffffff81b1e560 in __msan_poison_alloca (address=0xffffffff86203da0, size=24, descr=<optimized out>) at mm/kmsan/instrumentation.c:285 torvalds#86 0xffffffff8562821c in _printk (fmt=0xffffffff85f191a5 "\0016Attempting lock1") at kernel/printk/printk.c:2324 torvalds#87 0xffffffff81942aa2 in kmem_cache_create_usercopy (name=0xffffffff85f18903 "mm_struct", size=1296, align=0, flags=270336, useroffset=<optimized out>, usersize=<optimized out>, ctor=0x0 <fixed_percpu_data>) at mm/slab_common.c:296 torvalds#88 0xffffffff86f337a0 in mm_cache_init () at kernel/fork.c:3262 torvalds#89 0xffffffff86eacb8e in start_kernel () at init/main.c:932 torvalds#90 0xffffffff86ecdf94 in x86_64_start_reservations (real_mode_data=0x140e0 <exception_stacks+28896> <error: Cannot access memory at address 0x140e0>) at arch/x86/kernel/head64.c:555 torvalds#91 0xffffffff86ecde9b in x86_64_start_kernel (real_mode_data=0x140e0 <exception_stacks+28896> <error: Cannot access memory at address 0x140e0>) at arch/x86/kernel/head64.c:536 torvalds#92 0xffffffff810001d3 in secondary_startup_64 () at /pool/workspace/linux/arch/x86/kernel/head_64.S:461 torvalds#93 0x0000000000000000 in ??

As of 5ec8e8e(mm/sparsemem: fix race in accessing memory_section->usage) KMSAN now calls into RCU tree code during kmsan_get_metadata. This will trigger a write that will reenter into KMSAN getting the system stuck doing infinite recursion. #0 kmsan_get_context () at mm/kmsan/kmsan.h:106 #1 __msan_get_context_state () at mm/kmsan/instrumentation.c:331 #2 0xffffffff81495671 in get_current () at ./arch/x86/include/asm/current.h:42 #3 rcu_preempt_read_enter () at kernel/rcu/tree_plugin.h:379 #4 __rcu_read_lock () at kernel/rcu/tree_plugin.h:402 #5 0xffffffff81b2054b in rcu_read_lock () at ./include/linux/rcupdate.h:748 torvalds#6 pfn_valid (pfn=<optimized out>) at ./include/linux/mmzone.h:2016 torvalds#7 kmsan_virt_addr_valid (addr=addr@entry=0xffffffff8620d974 <init_task+1012>) at ./arch/x86/include/asm/kmsan.h:82 torvalds#8 virt_to_page_or_null (vaddr=vaddr@entry=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/shadow.c:75 torvalds#9 0xffffffff81b2023c in kmsan_get_metadata (address=0xffffffff8620d974 <init_task+1012>, is_origin=false) at mm/kmsan/shadow.c:143 torvalds#10 kmsan_get_shadow_origin_ptr (address=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/shadow.c:97 torvalds#11 0xffffffff81b1dbd2 in get_shadow_origin_ptr (addr=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/instrumentation.c:36 torvalds#12 __msan_metadata_ptr_for_load_4 (addr=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/instrumentation.c:91 torvalds#13 0xffffffff8149568f in rcu_preempt_read_enter () at kernel/rcu/tree_plugin.h:379 torvalds#14 __rcu_read_lock () at kernel/rcu/tree_plugin.h:402 torvalds#15 0xffffffff81b2054b in rcu_read_lock () at ./include/linux/rcupdate.h:748 torvalds#16 pfn_valid (pfn=<optimized out>) at ./include/linux/mmzone.h:2016 torvalds#17 kmsan_virt_addr_valid (addr=addr@entry=0xffffffff8620d974 <init_task+1012>) at ./arch/x86/include/asm/kmsan.h:82 torvalds#18 virt_to_page_or_null (vaddr=vaddr@entry=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/shadow.c:75 torvalds#19 0xffffffff81b2023c in kmsan_get_metadata (address=0xffffffff8620d974 <init_task+1012>, is_origin=false) at mm/kmsan/shadow.c:143 torvalds#20 kmsan_get_shadow_origin_ptr (address=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/shadow.c:97 torvalds#21 0xffffffff81b1dbd2 in get_shadow_origin_ptr (addr=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/instrumentation.c:36 torvalds#22 __msan_metadata_ptr_for_load_4 (addr=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/instrumentation.c:91 torvalds#23 0xffffffff8149568f in rcu_preempt_read_enter () at kernel/rcu/tree_plugin.h:379 torvalds#24 __rcu_read_lock () at kernel/rcu/tree_plugin.h:402 torvalds#25 0xffffffff81b2054b in rcu_read_lock () at ./include/linux/rcupdate.h:748 torvalds#26 pfn_valid (pfn=<optimized out>) at ./include/linux/mmzone.h:2016 torvalds#27 kmsan_virt_addr_valid (addr=addr@entry=0xffffffff8620d974 <init_task+1012>) at ./arch/x86/include/asm/kmsan.h:82 torvalds#28 virt_to_page_or_null (vaddr=vaddr@entry=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/shadow.c:75 torvalds#29 0xffffffff81b2023c in kmsan_get_metadata (address=0xffffffff8620d974 <init_task+1012>, is_origin=false) at mm/kmsan/shadow.c:143 torvalds#30 kmsan_get_shadow_origin_ptr (address=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/shadow.c:97 torvalds#31 0xffffffff81b1dbd2 in get_shadow_origin_ptr (addr=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/instrumentation.c:36 torvalds#32 __msan_metadata_ptr_for_load_4 (addr=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/instrumentation.c:91 torvalds#33 0xffffffff8149568f in rcu_preempt_read_enter () at kernel/rcu/tree_plugin.h:379 torvalds#34 __rcu_read_lock () at kernel/rcu/tree_plugin.h:402 torvalds#35 0xffffffff81b2054b in rcu_read_lock () at ./include/linux/rcupdate.h:748 torvalds#36 pfn_valid (pfn=<optimized out>) at ./include/linux/mmzone.h:2016 torvalds#37 kmsan_virt_addr_valid (addr=addr@entry=0xffffffff8620d974 <init_task+1012>) at ./arch/x86/include/asm/kmsan.h:82 torvalds#38 virt_to_page_or_null (vaddr=vaddr@entry=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/shadow.c:75 torvalds#39 0xffffffff81b2023c in kmsan_get_metadata (address=0xffffffff8620d974 <init_task+1012>, is_origin=false) at mm/kmsan/shadow.c:143 torvalds#40 kmsan_get_shadow_origin_ptr (address=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/shadow.c:97 torvalds#41 0xffffffff81b1dbd2 in get_shadow_origin_ptr (addr=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/instrumentation.c:36 torvalds#42 __msan_metadata_ptr_for_load_4 (addr=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/instrumentation.c:91 torvalds#43 0xffffffff8149568f in rcu_preempt_read_enter () at kernel/rcu/tree_plugin.h:379 torvalds#44 __rcu_read_lock () at kernel/rcu/tree_plugin.h:402 torvalds#45 0xffffffff81b2054b in rcu_read_lock () at ./include/linux/rcupdate.h:748 torvalds#46 pfn_valid (pfn=<optimized out>) at ./include/linux/mmzone.h:2016 torvalds#47 kmsan_virt_addr_valid (addr=addr@entry=0xffffffff8620d974 <init_task+1012>) at ./arch/x86/include/asm/kmsan.h:82 torvalds#48 virt_to_page_or_null (vaddr=vaddr@entry=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/shadow.c:75 torvalds#49 0xffffffff81b2023c in kmsan_get_metadata (address=0xffffffff8620d974 <init_task+1012>, is_origin=false) at mm/kmsan/shadow.c:143 torvalds#50 kmsan_get_shadow_origin_ptr (address=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/shadow.c:97 torvalds#51 0xffffffff81b1dbd2 in get_shadow_origin_ptr (addr=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/instrumentation.c:36 #52 __msan_metadata_ptr_for_load_4 (addr=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/instrumentation.c:91 #53 0xffffffff8149568f in rcu_preempt_read_enter () at kernel/rcu/tree_plugin.h:379 torvalds#54 __rcu_read_lock () at kernel/rcu/tree_plugin.h:402 torvalds#55 0xffffffff81b2054b in rcu_read_lock () at ./include/linux/rcupdate.h:748 torvalds#56 pfn_valid (pfn=<optimized out>) at ./include/linux/mmzone.h:2016 torvalds#57 kmsan_virt_addr_valid (addr=addr@entry=0xffffffff8620d974 <init_task+1012>) at ./arch/x86/include/asm/kmsan.h:82 #58 virt_to_page_or_null (vaddr=vaddr@entry=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/shadow.c:75 torvalds#59 0xffffffff81b2023c in kmsan_get_metadata (address=0xffffffff8620d974 <init_task+1012>, is_origin=false) at mm/kmsan/shadow.c:143 torvalds#60 kmsan_get_shadow_origin_ptr (address=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/shadow.c:97 torvalds#61 0xffffffff81b1dbd2 in get_shadow_origin_ptr (addr=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/instrumentation.c:36 torvalds#62 __msan_metadata_ptr_for_load_4 (addr=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/instrumentation.c:91 torvalds#63 0xffffffff8149568f in rcu_preempt_read_enter () at kernel/rcu/tree_plugin.h:379 torvalds#64 __rcu_read_lock () at kernel/rcu/tree_plugin.h:402 torvalds#65 0xffffffff81b2054b in rcu_read_lock () at ./include/linux/rcupdate.h:748 torvalds#66 pfn_valid (pfn=<optimized out>) at ./include/linux/mmzone.h:2016 torvalds#67 kmsan_virt_addr_valid (addr=addr@entry=0xffffffff8620d974 <init_task+1012>) at ./arch/x86/include/asm/kmsan.h:82 torvalds#68 virt_to_page_or_null (vaddr=vaddr@entry=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/shadow.c:75 torvalds#69 0xffffffff81b2023c in kmsan_get_metadata (address=0xffffffff8620d974 <init_task+1012>, is_origin=false) at mm/kmsan/shadow.c:143 #70 kmsan_get_shadow_origin_ptr (address=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/shadow.c:97 torvalds#71 0xffffffff81b1dbd2 in get_shadow_origin_ptr (addr=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/instrumentation.c:36 torvalds#72 __msan_metadata_ptr_for_load_4 (addr=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/instrumentation.c:91 torvalds#73 0xffffffff8149568f in rcu_preempt_read_enter () at kernel/rcu/tree_plugin.h:379 torvalds#74 __rcu_read_lock () at kernel/rcu/tree_plugin.h:402 torvalds#75 0xffffffff81b2054b in rcu_read_lock () at ./include/linux/rcupdate.h:748 torvalds#76 pfn_valid (pfn=<optimized out>) at ./include/linux/mmzone.h:2016 torvalds#77 kmsan_virt_addr_valid (addr=addr@entry=0xffffffff86203c90) at ./arch/x86/include/asm/kmsan.h:82 torvalds#78 virt_to_page_or_null (vaddr=vaddr@entry=0xffffffff86203c90) at mm/kmsan/shadow.c:75 torvalds#79 0xffffffff81b2023c in kmsan_get_metadata (address=0xffffffff86203c90, is_origin=false) at mm/kmsan/shadow.c:143 torvalds#80 kmsan_get_shadow_origin_ptr (address=0xffffffff86203c90, size=8, store=false) at mm/kmsan/shadow.c:97 torvalds#81 0xffffffff81b1dc72 in get_shadow_origin_ptr (addr=0xffffffff8620d974 <init_task+1012>, size=8, store=false) at mm/kmsan/instrumentation.c:36 torvalds#82 __msan_metadata_ptr_for_load_8 (addr=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/instrumentation.c:92 torvalds#83 0xffffffff814fdb9e in filter_irq_stacks (entries=<optimized out>, nr_entries=4) at kernel/stacktrace.c:397 torvalds#84 0xffffffff829520e8 in stack_depot_save_flags (entries=0xffffffff8620d974 <init_task+1012>, nr_entries=4, alloc_flags=0, depot_flags=0) at lib/stackdepot.c:500 torvalds#85 0xffffffff81b1e560 in __msan_poison_alloca (address=0xffffffff86203da0, size=24, descr=<optimized out>) at mm/kmsan/instrumentation.c:285 torvalds#86 0xffffffff8562821c in _printk (fmt=0xffffffff85f191a5 "\0016Attempting lock1") at kernel/printk/printk.c:2324 torvalds#87 0xffffffff81942aa2 in kmem_cache_create_usercopy (name=0xffffffff85f18903 "mm_struct", size=1296, align=0, flags=270336, useroffset=<optimized out>, usersize=<optimized out>, ctor=0x0 <fixed_percpu_data>) at mm/slab_common.c:296 torvalds#88 0xffffffff86f337a0 in mm_cache_init () at kernel/fork.c:3262 torvalds#89 0xffffffff86eacb8e in start_kernel () at init/main.c:932 torvalds#90 0xffffffff86ecdf94 in x86_64_start_reservations (real_mode_data=0x140e0 <exception_stacks+28896> <error: Cannot access memory at address 0x140e0>) at arch/x86/kernel/head64.c:555 torvalds#91 0xffffffff86ecde9b in x86_64_start_kernel (real_mode_data=0x140e0 <exception_stacks+28896> <error: Cannot access memory at address 0x140e0>) at arch/x86/kernel/head64.c:536 torvalds#92 0xffffffff810001d3 in secondary_startup_64 () at /pool/workspace/linux/arch/x86/kernel/head_64.S:461 torvalds#93 0x0000000000000000 in ??

If there is a symbol link in the given patch, like the following one: $ cat 0001-selftests-bpf-Add-mptcp-pm_nl_ctl-link.patch ''' # diff --git a/tools/testing/selftests/bpf/mptcp_pm_nl_ctl.c \ # b/tools/testing/selftests/bpf/mptcp_pm_nl_ctl.c # new file mode 120000 # index 000000000000..5a08c255b278 # --- /dev/null # +++ b/tools/testing/selftests/bpf/mptcp_pm_nl_ctl.c # @@ -0,0 +1 @@ # +../net/mptcp/pm_nl_ctl.c # \ No newline at end of file ''' checkpatch.pl reports two inaccurate warnings: ''' WARNING: Missing or malformed SPDX-License-Identifier tag in line 1 torvalds#65: FILE: tools/testing/selftests/bpf/mptcp_pm_nl_ctl.c:1: +../net/mptcp/pm_nl_ctl.c WARNING: adding a line without newline at end of file torvalds#65: FILE: tools/testing/selftests/bpf/mptcp_pm_nl_ctl.c:1: +../net/mptcp/pm_nl_ctl.c ''' And three checks if run it with strict option: ''' CHECK: spaces preferred around that '/' (ctx:VxV) torvalds#65: FILE: tools/testing/selftests/bpf/mptcp_pm_nl_ctl.c:1: +../net/mptcp/pm_nl_ctl.c ^ CHECK: spaces preferred around that '/' (ctx:VxV) torvalds#65: FILE: tools/testing/selftests/bpf/mptcp_pm_nl_ctl.c:1: +../net/mptcp/pm_nl_ctl.c ^ CHECK: spaces preferred around that '/' (ctx:VxV) torvalds#65: FILE: tools/testing/selftests/bpf/mptcp_pm_nl_ctl.c:1: +../net/mptcp/pm_nl_ctl.c ''' This patch fixes this by adding a new variable $symbol_link in checkpatch script, set it if the new file mode is 120000. Skip "missing or malformed SPDX-License-Identifier tag", "adding a line without newline at end of file" and "spaces preferred around that '/'" checks if this variable is set. Signed-off-by: Geliang Tang <[email protected]>

When the qp is in error state, the status of WQEs in the queue should be set to error. Or else the following will appear. [ 920.617269] WARNING: CPU: 1 PID: 21 at drivers/infiniband/sw/rxe/rxe_comp.c:756 rxe_completer+0x989/0xcc0 [rdma_rxe] [ 920.617744] Modules linked in: rnbd_client(O) rtrs_client(O) rtrs_core(O) rdma_ucm rdma_cm iw_cm ib_cm crc32_generic rdma_rxe ip6_udp_tunnel udp_tunnel ib_uverbs ib_core loop brd null_blk ipv6 [ 920.618516] CPU: 1 PID: 21 Comm: ksoftirqd/1 Tainted: G O 6.1.113-storage+ torvalds#65 [ 920.618986] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 [ 920.619396] RIP: 0010:rxe_completer+0x989/0xcc0 [rdma_rxe] [ 920.619658] Code: 0f b6 84 24 3a 02 00 00 41 89 84 24 44 04 00 00 e9 2a f7 ff ff 39 ca bb 03 00 00 00 b8 0e 00 00 00 48 0f 45 d8 e9 15 f7 ff ff <0f> 0b e9 cb f8 ff ff 41 bf f5 ff ff ff e9 08 f8 ff ff 49 8d bc 24 [ 920.620482] RSP: 0018:ffff97b7c00bbc38 EFLAGS: 00010246 [ 920.620817] RAX: 0000000000000000 RBX: 000000000000000c RCX: 0000000000000008 [ 920.621183] RDX: ffff960dc396ebc0 RSI: 0000000000005400 RDI: ffff960dc4e2fbac [ 920.621548] RBP: 0000000000000000 R08: 0000000000000001 R09: ffffffffac406450 [ 920.621884] R10: ffffffffac4060c0 R11: 0000000000000001 R12: ffff960dc4e2f800 [ 920.622254] R13: ffff960dc4e2f928 R14: ffff97b7c029c580 R15: 0000000000000000 [ 920.622609] FS: 0000000000000000(0000) GS:ffff960ef7d00000(0000) knlGS:0000000000000000 [ 920.622979] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 920.623245] CR2: 00007fa056965e90 CR3: 00000001107f1000 CR4: 00000000000006e0 [ 920.623680] Call Trace: [ 920.623815] <TASK> [ 920.623933] ? __warn+0x79/0xc0 [ 920.624116] ? rxe_completer+0x989/0xcc0 [rdma_rxe] [ 920.624356] ? report_bug+0xfb/0x150 [ 920.624594] ? handle_bug+0x3c/0x60 [ 920.624796] ? exc_invalid_op+0x14/0x70 [ 920.624976] ? asm_exc_invalid_op+0x16/0x20 [ 920.625203] ? rxe_completer+0x989/0xcc0 [rdma_rxe] [ 920.625474] ? rxe_completer+0x329/0xcc0 [rdma_rxe] [ 920.625749] rxe_do_task+0x80/0x110 [rdma_rxe] [ 920.626037] rxe_requester+0x625/0xde0 [rdma_rxe] [ 920.626310] ? rxe_cq_post+0xe2/0x180 [rdma_rxe] [ 920.626583] ? do_complete+0x18d/0x220 [rdma_rxe] [ 920.626812] ? rxe_completer+0x1a3/0xcc0 [rdma_rxe] [ 920.627050] rxe_do_task+0x80/0x110 [rdma_rxe] [ 920.627285] tasklet_action_common.constprop.0+0xa4/0x120 [ 920.627522] handle_softirqs+0xc2/0x250 [ 920.627728] ? sort_range+0x20/0x20 [ 920.627942] run_ksoftirqd+0x1f/0x30 [ 920.628158] smpboot_thread_fn+0xc7/0x1b0 [ 920.628334] kthread+0xd6/0x100 [ 920.628504] ? kthread_complete_and_exit+0x20/0x20 [ 920.628709] ret_from_fork+0x1f/0x30 [ 920.628892] </TASK> Fixes: ae720bd ("RDMA/rxe: Generate error completion for error requester QP state") Signed-off-by: Zhu Yanjun <[email protected]>

When the qp is in error state, the status of WQEs in the queue should be set to error. Or else the following will appear. [ 920.617269] WARNING: CPU: 1 PID: 21 at drivers/infiniband/sw/rxe/rxe_comp.c:756 rxe_completer+0x989/0xcc0 [rdma_rxe] [ 920.617744] Modules linked in: rnbd_client(O) rtrs_client(O) rtrs_core(O) rdma_ucm rdma_cm iw_cm ib_cm crc32_generic rdma_rxe ip6_udp_tunnel udp_tunnel ib_uverbs ib_core loop brd null_blk ipv6 [ 920.618516] CPU: 1 PID: 21 Comm: ksoftirqd/1 Tainted: G O 6.1.113-storage+ torvalds#65 [ 920.618986] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 [ 920.619396] RIP: 0010:rxe_completer+0x989/0xcc0 [rdma_rxe] [ 920.619658] Code: 0f b6 84 24 3a 02 00 00 41 89 84 24 44 04 00 00 e9 2a f7 ff ff 39 ca bb 03 00 00 00 b8 0e 00 00 00 48 0f 45 d8 e9 15 f7 ff ff <0f> 0b e9 cb f8 ff ff 41 bf f5 ff ff ff e9 08 f8 ff ff 49 8d bc 24 [ 920.620482] RSP: 0018:ffff97b7c00bbc38 EFLAGS: 00010246 [ 920.620817] RAX: 0000000000000000 RBX: 000000000000000c RCX: 0000000000000008 [ 920.621183] RDX: ffff960dc396ebc0 RSI: 0000000000005400 RDI: ffff960dc4e2fbac [ 920.621548] RBP: 0000000000000000 R08: 0000000000000001 R09: ffffffffac406450 [ 920.621884] R10: ffffffffac4060c0 R11: 0000000000000001 R12: ffff960dc4e2f800 [ 920.622254] R13: ffff960dc4e2f928 R14: ffff97b7c029c580 R15: 0000000000000000 [ 920.622609] FS: 0000000000000000(0000) GS:ffff960ef7d00000(0000) knlGS:0000000000000000 [ 920.622979] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 920.623245] CR2: 00007fa056965e90 CR3: 00000001107f1000 CR4: 00000000000006e0 [ 920.623680] Call Trace: [ 920.623815] <TASK> [ 920.623933] ? __warn+0x79/0xc0 [ 920.624116] ? rxe_completer+0x989/0xcc0 [rdma_rxe] [ 920.624356] ? report_bug+0xfb/0x150 [ 920.624594] ? handle_bug+0x3c/0x60 [ 920.624796] ? exc_invalid_op+0x14/0x70 [ 920.624976] ? asm_exc_invalid_op+0x16/0x20 [ 920.625203] ? rxe_completer+0x989/0xcc0 [rdma_rxe] [ 920.625474] ? rxe_completer+0x329/0xcc0 [rdma_rxe] [ 920.625749] rxe_do_task+0x80/0x110 [rdma_rxe] [ 920.626037] rxe_requester+0x625/0xde0 [rdma_rxe] [ 920.626310] ? rxe_cq_post+0xe2/0x180 [rdma_rxe] [ 920.626583] ? do_complete+0x18d/0x220 [rdma_rxe] [ 920.626812] ? rxe_completer+0x1a3/0xcc0 [rdma_rxe] [ 920.627050] rxe_do_task+0x80/0x110 [rdma_rxe] [ 920.627285] tasklet_action_common.constprop.0+0xa4/0x120 [ 920.627522] handle_softirqs+0xc2/0x250 [ 920.627728] ? sort_range+0x20/0x20 [ 920.627942] run_ksoftirqd+0x1f/0x30 [ 920.628158] smpboot_thread_fn+0xc7/0x1b0 [ 920.628334] kthread+0xd6/0x100 [ 920.628504] ? kthread_complete_and_exit+0x20/0x20 [ 920.628709] ret_from_fork+0x1f/0x30 [ 920.628892] </TASK> Fixes: ae720bd ("RDMA/rxe: Generate error completion for error requester QP state") Signed-off-by: Zhu Yanjun <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Leon Romanovsky <[email protected]>

[ Upstream commit ea4c990 ] When the qp is in error state, the status of WQEs in the queue should be set to error. Or else the following will appear. [ 920.617269] WARNING: CPU: 1 PID: 21 at drivers/infiniband/sw/rxe/rxe_comp.c:756 rxe_completer+0x989/0xcc0 [rdma_rxe] [ 920.617744] Modules linked in: rnbd_client(O) rtrs_client(O) rtrs_core(O) rdma_ucm rdma_cm iw_cm ib_cm crc32_generic rdma_rxe ip6_udp_tunnel udp_tunnel ib_uverbs ib_core loop brd null_blk ipv6 [ 920.618516] CPU: 1 PID: 21 Comm: ksoftirqd/1 Tainted: G O 6.1.113-storage+ torvalds#65 [ 920.618986] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 [ 920.619396] RIP: 0010:rxe_completer+0x989/0xcc0 [rdma_rxe] [ 920.619658] Code: 0f b6 84 24 3a 02 00 00 41 89 84 24 44 04 00 00 e9 2a f7 ff ff 39 ca bb 03 00 00 00 b8 0e 00 00 00 48 0f 45 d8 e9 15 f7 ff ff <0f> 0b e9 cb f8 ff ff 41 bf f5 ff ff ff e9 08 f8 ff ff 49 8d bc 24 [ 920.620482] RSP: 0018:ffff97b7c00bbc38 EFLAGS: 00010246 [ 920.620817] RAX: 0000000000000000 RBX: 000000000000000c RCX: 0000000000000008 [ 920.621183] RDX: ffff960dc396ebc0 RSI: 0000000000005400 RDI: ffff960dc4e2fbac [ 920.621548] RBP: 0000000000000000 R08: 0000000000000001 R09: ffffffffac406450 [ 920.621884] R10: ffffffffac4060c0 R11: 0000000000000001 R12: ffff960dc4e2f800 [ 920.622254] R13: ffff960dc4e2f928 R14: ffff97b7c029c580 R15: 0000000000000000 [ 920.622609] FS: 0000000000000000(0000) GS:ffff960ef7d00000(0000) knlGS:0000000000000000 [ 920.622979] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 920.623245] CR2: 00007fa056965e90 CR3: 00000001107f1000 CR4: 00000000000006e0 [ 920.623680] Call Trace: [ 920.623815] <TASK> [ 920.623933] ? __warn+0x79/0xc0 [ 920.624116] ? rxe_completer+0x989/0xcc0 [rdma_rxe] [ 920.624356] ? report_bug+0xfb/0x150 [ 920.624594] ? handle_bug+0x3c/0x60 [ 920.624796] ? exc_invalid_op+0x14/0x70 [ 920.624976] ? asm_exc_invalid_op+0x16/0x20 [ 920.625203] ? rxe_completer+0x989/0xcc0 [rdma_rxe] [ 920.625474] ? rxe_completer+0x329/0xcc0 [rdma_rxe] [ 920.625749] rxe_do_task+0x80/0x110 [rdma_rxe] [ 920.626037] rxe_requester+0x625/0xde0 [rdma_rxe] [ 920.626310] ? rxe_cq_post+0xe2/0x180 [rdma_rxe] [ 920.626583] ? do_complete+0x18d/0x220 [rdma_rxe] [ 920.626812] ? rxe_completer+0x1a3/0xcc0 [rdma_rxe] [ 920.627050] rxe_do_task+0x80/0x110 [rdma_rxe] [ 920.627285] tasklet_action_common.constprop.0+0xa4/0x120 [ 920.627522] handle_softirqs+0xc2/0x250 [ 920.627728] ? sort_range+0x20/0x20 [ 920.627942] run_ksoftirqd+0x1f/0x30 [ 920.628158] smpboot_thread_fn+0xc7/0x1b0 [ 920.628334] kthread+0xd6/0x100 [ 920.628504] ? kthread_complete_and_exit+0x20/0x20 [ 920.628709] ret_from_fork+0x1f/0x30 [ 920.628892] </TASK> Fixes: ae720bd ("RDMA/rxe: Generate error completion for error requester QP state") Signed-off-by: Zhu Yanjun <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

Update REPORTING-BUGS

87e6350

logic10492 pushed a commit to logic10492/linux-amd-zen2 that referenced this pull request Jan 18, 2024

Merge pull request torvalds#65 from sched-ext/add-scx_layered

924c005

sched_ext: Add scx_layered

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Update REPORTING-BUGS #65

Update REPORTING-BUGS #65

ghost commented Jan 2, 2014

Update REPORTING-BUGS #65

Are you sure you want to change the base?

Update REPORTING-BUGS #65

Conversation

ghost commented Jan 2, 2014