Merge pull request #1 from torvalds/master #41
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
pull-linuxmaster
dsahern
pushed a commit
to dsahern/linux
that referenced
this pull request
Aug 2, 2013
Add support for Octeon USB HCD. Tested on EdgeRouter Lite with USB mass storage. The driver has been extracted from GPL sources of EdgeRouter Lite firmware (based on Linux 2.6.32.13). Some minor fixes and cleanups have been done to make it work with 3.10-rc3. $ uname -a Linux (none) 3.10.0-rc3-edge-00005-g86cb5bc torvalds#41 SMP PREEMPT Sat Jun 1 20:41:46 EEST 2013 mips64 GNU/Linux $ modprobe octeon-usb [ 37.971683] octeon_usb: module is from the staging directory, the quality is unknown, you have been warned. [ 37.983649] OcteonUSB: Detected 1 ports [ 37.999360] OcteonUSB OcteonUSB.0: Octeon Host Controller [ 38.004847] OcteonUSB OcteonUSB.0: new USB bus registered, assigned bus number 1 [ 38.012332] OcteonUSB OcteonUSB.0: irq 122, io mem 0x00000000 [ 38.019970] hub 1-0:1.0: USB hub found [ 38.023851] hub 1-0:1.0: 1 port detected [ 38.028101] OcteonUSB: Registered HCD for port 0 on irq 122 [ 38.391443] usb 1-1: new high-speed USB device number 2 using OcteonUSB [ 38.586922] usb-storage 1-1:1.0: USB Mass Storage device detected [ 38.597375] scsi0 : usb-storage 1-1:1.0 [ 39.604111] scsi 0:0:0:0: Direct-Access USB DISK 2.0 PMAP PQ: 0 ANSI: 4 [ 39.619113] sd 0:0:0:0: [sda] 7579008 512-byte logical blocks: (3.88 GB/3.61 GiB) [ 39.630696] sd 0:0:0:0: [sda] Write Protect is off [ 39.635945] sd 0:0:0:0: [sda] No Caching mode page present [ 39.641464] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 39.651341] sd 0:0:0:0: [sda] No Caching mode page present [ 39.656917] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 39.664296] sda: sda1 sda2 [ 39.675574] sd 0:0:0:0: [sda] No Caching mode page present [ 39.681093] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 39.687223] sd 0:0:0:0: [sda] Attached SCSI removable disk Signed-off-by: Aaro Koskinen <[email protected]> Cc: David Daney <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
merge pull request
swarren
pushed a commit
to swarren/linux-tegra
that referenced
this pull request
Oct 14, 2013
As the new x86 CPU bootup printout format code maintainer, I am taking immediate action to improve and clean (and thus indulge my OCD) the reporting of the cores when coming up online. Fix padding to a right-hand alignment, cleanup code and bind reporting width to the max number of supported CPUs on the system, like this: [ 0.074509] smpboot: Booting Node 0, Processors: #1 #2 #3 #4 #5 torvalds#6 torvalds#7 OK [ 0.644008] smpboot: Booting Node 1, Processors: torvalds#8 torvalds#9 torvalds#10 torvalds#11 torvalds#12 torvalds#13 torvalds#14 torvalds#15 OK [ 1.245006] smpboot: Booting Node 2, Processors: torvalds#16 torvalds#17 torvalds#18 torvalds#19 torvalds#20 torvalds#21 torvalds#22 torvalds#23 OK [ 1.864005] smpboot: Booting Node 3, Processors: torvalds#24 torvalds#25 torvalds#26 torvalds#27 torvalds#28 torvalds#29 torvalds#30 torvalds#31 OK [ 2.489005] smpboot: Booting Node 4, Processors: torvalds#32 torvalds#33 torvalds#34 torvalds#35 torvalds#36 torvalds#37 torvalds#38 torvalds#39 OK [ 3.093005] smpboot: Booting Node 5, Processors: torvalds#40 torvalds#41 torvalds#42 torvalds#43 torvalds#44 torvalds#45 torvalds#46 torvalds#47 OK [ 3.698005] smpboot: Booting Node 6, Processors: torvalds#48 torvalds#49 torvalds#50 torvalds#51 #52 #53 torvalds#54 torvalds#55 OK [ 4.304005] smpboot: Booting Node 7, Processors: torvalds#56 torvalds#57 #58 torvalds#59 torvalds#60 torvalds#61 torvalds#62 torvalds#63 OK [ 4.961413] Brought up 64 CPUs and this: [ 0.072367] smpboot: Booting Node 0, Processors: #1 #2 #3 #4 #5 torvalds#6 torvalds#7 OK [ 0.686329] Brought up 8 CPUs Signed-off-by: Borislav Petkov <[email protected]> Cc: Libin <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
swarren
pushed a commit
to swarren/linux-tegra
that referenced
this pull request
Oct 14, 2013
Turn it into (for example): [ 0.073380] x86: Booting SMP configuration: [ 0.074005] .... node #0, CPUs: #1 #2 #3 #4 #5 torvalds#6 torvalds#7 [ 0.603005] .... node #1, CPUs: torvalds#8 torvalds#9 torvalds#10 torvalds#11 torvalds#12 torvalds#13 torvalds#14 torvalds#15 [ 1.200005] .... node #2, CPUs: torvalds#16 torvalds#17 torvalds#18 torvalds#19 torvalds#20 torvalds#21 torvalds#22 torvalds#23 [ 1.796005] .... node #3, CPUs: torvalds#24 torvalds#25 torvalds#26 torvalds#27 torvalds#28 torvalds#29 torvalds#30 torvalds#31 [ 2.393005] .... node #4, CPUs: torvalds#32 torvalds#33 torvalds#34 torvalds#35 torvalds#36 torvalds#37 torvalds#38 torvalds#39 [ 2.996005] .... node #5, CPUs: torvalds#40 torvalds#41 torvalds#42 torvalds#43 torvalds#44 torvalds#45 torvalds#46 torvalds#47 [ 3.600005] .... node torvalds#6, CPUs: torvalds#48 torvalds#49 torvalds#50 torvalds#51 #52 #53 torvalds#54 torvalds#55 [ 4.202005] .... node torvalds#7, CPUs: torvalds#56 torvalds#57 #58 torvalds#59 torvalds#60 torvalds#61 torvalds#62 torvalds#63 [ 4.811005] .... node torvalds#8, CPUs: torvalds#64 torvalds#65 torvalds#66 torvalds#67 torvalds#68 torvalds#69 #70 torvalds#71 [ 5.421006] .... node torvalds#9, CPUs: torvalds#72 torvalds#73 torvalds#74 torvalds#75 torvalds#76 torvalds#77 torvalds#78 torvalds#79 [ 6.032005] .... node torvalds#10, CPUs: torvalds#80 torvalds#81 torvalds#82 torvalds#83 torvalds#84 torvalds#85 torvalds#86 torvalds#87 [ 6.648006] .... node torvalds#11, CPUs: torvalds#88 torvalds#89 torvalds#90 torvalds#91 torvalds#92 torvalds#93 torvalds#94 torvalds#95 [ 7.262005] .... node torvalds#12, CPUs: torvalds#96 torvalds#97 torvalds#98 torvalds#99 torvalds#100 torvalds#101 torvalds#102 torvalds#103 [ 7.865005] .... node torvalds#13, CPUs: torvalds#104 torvalds#105 torvalds#106 torvalds#107 torvalds#108 torvalds#109 torvalds#110 torvalds#111 [ 8.466005] .... node torvalds#14, CPUs: torvalds#112 torvalds#113 torvalds#114 torvalds#115 torvalds#116 torvalds#117 torvalds#118 torvalds#119 [ 9.073006] .... node torvalds#15, CPUs: torvalds#120 torvalds#121 torvalds#122 torvalds#123 torvalds#124 torvalds#125 torvalds#126 torvalds#127 [ 9.679901] x86: Booted up 16 nodes, 128 CPUs and drop useless elements. Change num_digits() to hpa's division-avoiding, cell-phone-typed version which he went at great lengths and pains to submit on a Saturday evening. Signed-off-by: Borislav Petkov <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: Linus Torvalds <[email protected]> Cc: Andrew Morton <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
|
pull-linuxmaster |
torvalds
pushed a commit
that referenced
this pull request
Mar 20, 2014
Starting with commit 3da5278 (of/irq: Rework of_irq_count()) the following warning is triggered on octeon cn3xxx: [ 0.887281] WARNING: CPU: 0 PID: 1 at drivers/of/platform.c:171 of_device_alloc+0x228/0x230() [ 0.895642] Modules linked in: [ 0.898689] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.14.0-rc7-00012-g9ae51f2-dirty #41 [ 0.906860] Stack : c8b439581166d96e ffffffff816b0000 0000000040808000 ffffffff81185ddc [ 0.906860] 0000000000000000 0000000000000000 0000000000000000 000000000000000b [ 0.906860] 000000000000000a 000000000000000a 0000000000000000 0000000000000000 [ 0.906860] ffffffff81740000 ffffffff81720000 ffffffff81615900 ffffffff816b0177 [ 0.906860] ffffffff81727d10 800000041f868fb0 0000000000000001 0000000000000000 [ 0.906860] 0000000000000000 0000000000000038 0000000000000001 ffffffff81568484 [ 0.906860] 800000041f86faa8 ffffffff81145ddc 0000000000000000 ffffffff811873f4 [ 0.906860] 800000041f868b88 800000041f86f9c0 0000000000000000 ffffffff81569c9c [ 0.906860] 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 0.906860] 0000000000000000 ffffffff811205e0 0000000000000000 0000000000000000 [ 0.906860] ... [ 0.971695] Call Trace: [ 0.974139] [<ffffffff811205e0>] show_stack+0x68/0x80 [ 0.979183] [<ffffffff81569c9c>] dump_stack+0x8c/0xe0 [ 0.984196] [<ffffffff81145efc>] warn_slowpath_common+0x84/0xb8 [ 0.990110] [<ffffffff81436888>] of_device_alloc+0x228/0x230 [ 0.995726] [<ffffffff814368d8>] of_platform_device_create_pdata+0x48/0xd0 [ 1.002593] [<ffffffff81436a94>] of_platform_bus_create+0x134/0x1e8 [ 1.008837] [<ffffffff81436af8>] of_platform_bus_create+0x198/0x1e8 [ 1.015064] [<ffffffff81436cc4>] of_platform_bus_probe+0xa4/0x100 [ 1.021149] [<ffffffff81100570>] do_one_initcall+0xd8/0x128 [ 1.026701] [<ffffffff816e2a10>] kernel_init_freeable+0x144/0x210 [ 1.032753] [<ffffffff81564bc4>] kernel_init+0x14/0x110 [ 1.037973] [<ffffffff8111bb44>] ret_from_kernel_thread+0x14/0x1c With this commit the kernel starts mapping the interrupts listed for gpio-controller node. irq_domain_ops for CIU (octeon_irq_ciu_map and octeon_irq_ciu_xlat) refuse to handle the GPIO lines (returning -EINVAL) and this is causing above warning in of_device_alloc(). Modify irq_domain_ops for CIU and CIU2 to "gracefully handle" GPIO lines (neither return error code nor call octeon_irq_set_ciu_mapping for it). This should avoid the warning. (As before the real setup for GPIO lines will happen using irq_domain_ops of gpio-controller.) This patch is based on Wei's patch v2 (see http://marc.info/?l=linux-mips&m=139511814813247). Signed-off-by: Andreas Herrmann <[email protected]> Reported-by: Yang Wei <[email protected]> Acked-by: David Daney <[email protected]> Cc: [email protected] Patchwork: https://patchwork.linux-mips.org/patch/6624/ Signed-off-by: Ralf Baechle <[email protected]>
ddstreet
pushed a commit
to ddstreet/linux
that referenced
this pull request
Apr 8, 2014
GIT 08edb33 commit 708f04d Author: Dave Jones <[email protected]> Date: Thu Mar 20 15:03:58 2014 -0600 block: free q->flush_rq in blk_init_allocated_queue error paths Commit 7982e90 ("block: fix q->flush_rq NULL pointer crash on dm-mpath flush") moved an allocation to blk_init_allocated_queue(), but neglected to free that allocation on the error paths that follow. Signed-off-by: Dave Jones <[email protected]> Acked-by: Mike Snitzer <[email protected]> Signed-off-by: Jens Axboe <[email protected]> Signed-off-by: Linus Torvalds <[email protected]> commit 11d4616 Author: Linus Torvalds <[email protected]> Date: Thu Mar 20 22:11:17 2014 -0700 futex: revert back to the explicit waiter counting code Srikar Dronamraju reports that commit b0c29f7 ("futexes: Avoid taking the hb->lock if there's nothing to wake up") causes java threads getting stuck on futexes when runing specjbb on a power7 numa box. The cause appears to be that the powerpc spinlocks aren't using the same ticket lock model that we use on x86 (and other) architectures, which in turn result in the "spin_is_locked()" test in hb_waiters_pending() occasionally reporting an unlocked spinlock even when there are pending waiters. So this reinstates Davidlohr Bueso's original explicit waiter counting code, which I had convinced Davidlohr to drop in favor of figuring out the pending waiters by just using the existing state of the spinlock and the wait queue. Reported-and-tested-by: Srikar Dronamraju <[email protected]> Original-code-by: Davidlohr Bueso <[email protected]> Signed-off-by: Linus Torvalds <[email protected]> commit 7e09e73 Author: Hugh Dickins <[email protected]> Date: Thu Mar 20 21:52:17 2014 -0700 mm: fix swapops.h:131 bug if remap_file_pages raced migration Add remove_linear_migration_ptes_from_nonlinear(), to fix an interesting little include/linux/swapops.h:131 BUG_ON(!PageLocked) found by trinity: indicating that remove_migration_ptes() failed to find one of the migration entries that was temporarily inserted. The problem comes from remap_file_pages()'s switch from vma_interval_tree (good for inserting the migration entry) to i_mmap_nonlinear list (no good for locating it again); but can only be a problem if the remap_file_pages() range does not cover the whole of the vma (zap_pte() clears the range). remove_migration_ptes() needs a file_nonlinear method to go down the i_mmap_nonlinear list, applying linear location to look for migration entries in those vmas too, just in case there was this race. The file_nonlinear method does need rmap_walk_control.arg to do this; but it never needed vma passed in - vma comes from its own iteration. Reported-and-tested-by: Dave Jones <[email protected]> Reported-and-tested-by: Sasha Levin <[email protected]> Signed-off-by: Hugh Dickins <[email protected]> Signed-off-by: Linus Torvalds <[email protected]> commit 8729134 Author: Vaibhav Nagarnaik <[email protected]> Date: Thu Feb 13 19:51:48 2014 -0800 tracing: Fix array size mismatch in format string In event format strings, the array size is reported in two locations. One in array subscript and then via the "size:" attribute. The values reported there have a mismatch. For e.g., in sched:sched_switch the prev_comm and next_comm character arrays have subscript values as [32] where as the actual field size is 16. name: sched_switch ID: 301 format: field:unsigned short common_type; offset:0; size:2; signed:0; field:unsigned char common_flags; offset:2; size:1; signed:0; field:unsigned char common_preempt_count; offset:3; size:1;signed:0; field:int common_pid; offset:4; size:4; signed:1; field:char prev_comm[32]; offset:8; size:16; signed:1; field:pid_t prev_pid; offset:24; size:4; signed:1; field:int prev_prio; offset:28; size:4; signed:1; field:long prev_state; offset:32; size:8; signed:1; field:char next_comm[32]; offset:40; size:16; signed:1; field:pid_t next_pid; offset:56; size:4; signed:1; field:int next_prio; offset:60; size:4; signed:1; After bisection, the following commit was blamed: 92edca0 tracing: Use direct field, type and system names This commit removes the duplication of strings for field->name and field->type assuming that all the strings passed in __trace_define_field() are immutable. This is not true for arrays, where the type string is created in event_storage variable and field->type for all array fields points to event_storage. Use __stringify() to create a string constant for the type string. Also, get rid of event_storage and event_storage_mutex that are not needed anymore. also, an added benefit is that this reduces the overhead of events a bit more: text data bss dec hex filename 8424787 2036472 1302528 11763787 b3804b vmlinux 8420814 2036408 1302528 11759750 b37086 vmlinux.patched Link: http://lkml.kernel.org/r/[email protected] Cc: Laurent Chavey <[email protected]> Cc: [email protected] # 3.10+ Signed-off-by: Vaibhav Nagarnaik <[email protected]> Signed-off-by: Steven Rostedt <[email protected]> commit 71ca758 Author: Jim Quinlan <[email protected]> Date: Wed Nov 27 15:34:50 2013 -0500 MIPS: Make local_irq_disable macro safe for non-Mipsr2 For non-mipsr2 processors, the local_irq_disable contains an mfc0-mtc0 pair with instructions inbetween. With preemption enabled, this sequence may get preempted and effect a stale value of CP0_STATUS when executing the mtc0 instruction. This commit avoids this scenario by incrementing the preempt count before the mfc0 and decrementing it after the mtc9. [[email protected]: This patch is sorting out the part that were missed by e97c5b6 [MIPS: Make irqflags.h functions preempt-safe for non-mipsr2 cpus.] I also re-enabled the inclusion of <asm/asm-offsets.h> at the top of <asm/asmmacro.h>]. Signed-off-by: Jim Quinlan <[email protected]> Cc: [email protected] Cc: [email protected] Patchwork: https://patchwork.linux-mips.org/patch/6164/ Signed-off-by: Ralf Baechle <[email protected]> commit 85d898b Author: Daniel Kurtz <[email protected]> Date: Mon Mar 17 11:28:06 2014 +0800 drm/exynos: Fix (more) freeing issues in exynos_drm_drv.c The following commit [0] fixed a use-after-free, but left the subdrv open in the error path. [0] commit 6ca605f drm/exynos: Fix freeing issues in exynos_drm_drv.c Signed-off-by: Daniel Kurtz <[email protected]> Acked-by: Sachin Kamat <[email protected]> Signed-off-by: Inki Dae <[email protected]> commit 8878439 Author: Hugh Dickins <[email protected]> Date: Tue Mar 18 17:38:38 2014 -0700 mm: fix bad rss-counter if remap_file_pages raced migration Fix some "Bad rss-counter state" reports on exit, arising from the interaction between page migration and remap_file_pages(): zap_pte() must count a migration entry when zapping it. And yes, it is possible (though very unusual) to find an anon page or swap entry in a VM_SHARED nonlinear mapping: coming from that horrid get_user_pages(write, force) case which COWs even in a shared mapping. Signed-off-by: Hugh Dickins <[email protected]> Tested-by: Sasha Levin [email protected]> Tested-by: Dave Jones [email protected]> Cc: Cyrill Gorcunov <[email protected]> Cc: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]> commit 2eddb70 Author: Andreas Herrmann <[email protected]> Date: Wed Mar 19 23:03:30 2014 +0100 MIPS: Octeon: Fix warning in of_device_alloc on cn3xxx Starting with commit 3da5278 (of/irq: Rework of_irq_count()) the following warning is triggered on octeon cn3xxx: [ 0.887281] WARNING: CPU: 0 PID: 1 at drivers/of/platform.c:171 of_device_alloc+0x228/0x230() [ 0.895642] Modules linked in: [ 0.898689] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.14.0-rc7-00012-g9ae51f2-dirty torvalds#41 [ 0.906860] Stack : c8b439581166d96e ffffffff816b0000 0000000040808000 ffffffff81185ddc [ 0.906860] 0000000000000000 0000000000000000 0000000000000000 000000000000000b [ 0.906860] 000000000000000a 000000000000000a 0000000000000000 0000000000000000 [ 0.906860] ffffffff81740000 ffffffff81720000 ffffffff81615900 ffffffff816b0177 [ 0.906860] ffffffff81727d10 800000041f868fb0 0000000000000001 0000000000000000 [ 0.906860] 0000000000000000 0000000000000038 0000000000000001 ffffffff81568484 [ 0.906860] 800000041f86faa8 ffffffff81145ddc 0000000000000000 ffffffff811873f4 [ 0.906860] 800000041f868b88 800000041f86f9c0 0000000000000000 ffffffff81569c9c [ 0.906860] 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 0.906860] 0000000000000000 ffffffff811205e0 0000000000000000 0000000000000000 [ 0.906860] ... [ 0.971695] Call Trace: [ 0.974139] [<ffffffff811205e0>] show_stack+0x68/0x80 [ 0.979183] [<ffffffff81569c9c>] dump_stack+0x8c/0xe0 [ 0.984196] [<ffffffff81145efc>] warn_slowpath_common+0x84/0xb8 [ 0.990110] [<ffffffff81436888>] of_device_alloc+0x228/0x230 [ 0.995726] [<ffffffff814368d8>] of_platform_device_create_pdata+0x48/0xd0 [ 1.002593] [<ffffffff81436a94>] of_platform_bus_create+0x134/0x1e8 [ 1.008837] [<ffffffff81436af8>] of_platform_bus_create+0x198/0x1e8 [ 1.015064] [<ffffffff81436cc4>] of_platform_bus_probe+0xa4/0x100 [ 1.021149] [<ffffffff81100570>] do_one_initcall+0xd8/0x128 [ 1.026701] [<ffffffff816e2a10>] kernel_init_freeable+0x144/0x210 [ 1.032753] [<ffffffff81564bc4>] kernel_init+0x14/0x110 [ 1.037973] [<ffffffff8111bb44>] ret_from_kernel_thread+0x14/0x1c With this commit the kernel starts mapping the interrupts listed for gpio-controller node. irq_domain_ops for CIU (octeon_irq_ciu_map and octeon_irq_ciu_xlat) refuse to handle the GPIO lines (returning -EINVAL) and this is causing above warning in of_device_alloc(). Modify irq_domain_ops for CIU and CIU2 to "gracefully handle" GPIO lines (neither return error code nor call octeon_irq_set_ciu_mapping for it). This should avoid the warning. (As before the real setup for GPIO lines will happen using irq_domain_ops of gpio-controller.) This patch is based on Wei's patch v2 (see http://marc.info/?l=linux-mips&m=139511814813247). Signed-off-by: Andreas Herrmann <[email protected]> Reported-by: Yang Wei <[email protected]> Acked-by: David Daney <[email protected]> Cc: [email protected] Patchwork: https://patchwork.linux-mips.org/patch/6624/ Signed-off-by: Ralf Baechle <[email protected]> commit b08ac66 Author: Viller Hsiao <[email protected]> Date: Tue Mar 18 15:39:34 2014 +0800 MIPS: ftrace: Tweak safe_load()/safe_store() macros Due to name collision in ftrace safe_load and safe_store macros, these macros cannot take expressions as operands. For example, compiler will complain for a macro call like the following: safe_store_code(new_code2, ip + 4, faulted); arch/mips/include/asm/ftrace.h:61:6: note: in definition of macro 'safe_store' : [dst] "r" (dst), [src] "r" (src)\ ^ arch/mips/kernel/ftrace.c:118:2: note: in expansion of macro 'safe_store_code' safe_store_code(new_code2, ip + 4, faulted); ^ arch/mips/kernel/ftrace.c:118:32: error: undefined named operand 'ip + 4' safe_store_code(new_code2, ip + 4, faulted); ^ arch/mips/include/asm/ftrace.h:61:6: note: in definition of macro 'safe_store' : [dst] "r" (dst), [src] "r" (src)\ ^ arch/mips/kernel/ftrace.c:118:2: note: in expansion of macro 'safe_store_code' safe_store_code(new_code2, ip + 4, faulted); ^ This build error is triggered by a467109 [MIPS: ftrace: Fix icache flush range error]. Tweak variable naming in those macros to allow flexible operands. Signed-off-by: Viller Hsiao <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Patchwork: https://patchwork.linux-mips.org/patch/6622/ Signed-off-by: Ralf Baechle <[email protected]> commit 749d322 Author: Charles Keepax <[email protected]> Date: Wed Mar 19 12:59:39 2014 +0000 ALSA: compress: Pass through return value of open ops callback The snd_compr_open function would always return 0 even if the compressed ops open function failed, obviously this is incorrect. Looks like this was introduced by a small typo in: commit a0830db ALSA: Add a reference counter to card instance This patch returns the value from the compressed op as it should. Signed-off-by: Charles Keepax <[email protected]> Acked-by: Vinod Koul <[email protected]> Cc: <[email protected]> Signed-off-by: Takashi Iwai <[email protected]> commit 4fe2169 Author: Rafał Miłecki <[email protected]> Date: Thu Feb 13 17:48:12 2014 +0100 MIPS: BCM47XX: Check all (32) GPIOs when looking for a pin Broadcom boards support 32 GPIOs and NVRAM may have entires for higher ones too. Example: gpio23=wombo_reset Signed-off-by: Rafa? Mi?ecki <[email protected]> Acked-by: Hauke Mehrtens <[email protected]> Cc: [email protected] Cc: Rafał Miłecki <[email protected]> Patchwork: https://patchwork.linux-mips.org/patch/6547/ Signed-off-by: Ralf Baechle <[email protected]> commit 0f4706d Author: Chris Wilson <[email protected]> Date: Tue Mar 18 14:50:50 2014 +0200 drm/i915: Disable stolen memory when DMAR is active We have reports of heavy screen corruption if we try to use the stolen memory reserved by the BIOS whilst the DMA-Remapper is active. This quirk may be only specific to a few machines or BIOSes, but first lets apply the big hammer and always disable use of stolen memory when DMAR is active. v2 by Jani: Rebase on -fixes, only look at intel_iommu_gfx_mapped. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=68535 Signed-off-by: Chris Wilson <[email protected]> Reviewed-by: Daniel Vetter <[email protected]> Cc: [email protected] Signed-off-by: Jani Nikula <[email protected]> commit 8259383 Author: Jani Nikula <[email protected]> Date: Mon Mar 17 15:20:59 2014 +0200 Revert "drm/i915: don't touch the VDD when disabling the panel" This reverts commit dff392d Author: Paulo Zanoni <[email protected]> Date: Fri Dec 6 17:32:41 2013 -0200 drm/i915: don't touch the VDD when disabling the panel which didn't take into account commit 6cb4983 Author: Daniel Vetter <[email protected]> Date: Sun May 20 17:14:50 2012 +0200 drm/i915: enable vdd when switching off the eDP panel and commit 35a3855 Author: Daniel Vetter <[email protected]> Date: Sun Aug 12 22:17:14 2012 +0200 drm/i915: reorder edp disabling to fix ivb MacBook Air Unsurprisingly, various MacBooks failed. Effectively the same has already been done in drm-intel-next-queued. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=74628 Tested-by: Patrik Jakobsson <[email protected]> Cc: Paulo Zanoni <[email protected]> Acked-by: Daniel Vetter <[email protected]> Signed-off-by: Jani Nikula <[email protected]> commit 3eb59ec Author: Li Zefan <[email protected]> Date: Tue Mar 18 17:02:36 2014 +0800 cgroup: fix a failure path in create_css() If online_css() fails, we should remove cgroup files belonging to css->ss. Signed-off-by: Li Zefan <[email protected]> Signed-off-by: Tejun Heo <[email protected]> commit 707d4ee Author: Bjorn Helgaas <[email protected]> Date: Tue Mar 18 14:26:12 2014 -0600 Revert "[PATCH] Insert GART region into resource map" This reverts commit 56dd669, which makes the GART visible in /proc/iomem. This fixes a regression: e501b3d ("agp: Support 64-bit APBASE") exposed an existing problem with a conflict between the GART region and a PCI BAR region. The GART addresses are bus addresses, not CPU addresses, and therefore should not be inserted in iomem_resource. On many machines, the GART region is addressable by the CPU as well as by an AGP master, but CPU addressability is not required by the spec. On some of these machines, the GART is mapped by a PCI BAR, and in that case, the PCI core automatically inserts it into iomem_resource, just as it does for all BARs. Inserting it here means we'll have a conflict if the PCI core later tries to claim the GART region, so let's drop the insertion here. The conflict indirectly causes X failures, as reported by Jouni in the bugzilla below. We detected the conflict even before e501b3d, but after it the AGP code (fix_northbridge()) uses the PCI resource (which is zeroed because of the conflict) instead of reading the BAR again. Conflicts: arch/x86_64/kernel/aperture.c Fixes: e501b3d agp: Support 64-bit APBASE Link: https://bugzilla.kernel.org/show_bug.cgi?id=72201 Reported-and-tested-by: Jouni Mettälä <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> commit 3055644 Author: Clemens Ladisch <[email protected]> Date: Tue Mar 18 09:31:18 2014 +0100 ALSA: oxygen: Xonar DG(X): fix Stereo Upmixing regression The code introduced in commit 1f91ecc ("ALSA: oxygen: modify adjust_dg_dac_routing function") accidentally disregarded the old value of the playback routing register, so it broke the "Stereo Upmixing" mixer control. The unmuted parts of the channel routing are the same for all settings of the output destination, so it suffices to revert that part of the patch. Fixes: 1f91ecc ('ALSA: oxygen: modify adjust_dg_dac_routing function') Tested-by: Roman Volkov <[email protected]> Signed-off-by: Clemens Ladisch <[email protected]> Signed-off-by: Takashi Iwai <[email protected]> commit e4362d1 Author: Alex Smith <[email protected]> Date: Tue Jan 21 11:22:35 2014 +0000 MIPS: Fix possible build error with transparent hugepages enabled If CONFIG_TRANSPARENT_HUGEPAGE is enabled, but CONFIG_HUGETLB_PAGE is not, it is possible to end up with a configuration that fails to build with the following error: include/linux/huge_mm.h:125:2: error: #error "hugepages can't be allocated by the buddy allocator" This is due to CONFIG_FORCE_MAX_ZONEORDER defaulting to 11. It already has ranges that change the valid values when HUGETLB_PAGE is enabled, but this is not done for TRANSPARENT_HUGEPAGE. Fix by changing the HUGETLB_PAGE dependencies to MIPS_HUGE_TLB_SUPPORT, which includes both TRANSPARENT_HUGEPAGE and HUGETLB_PAGE. Signed-off-by: Alex Smith <[email protected]> Reviewed-by: Markos Chandras <[email protected]> Cc: [email protected] Patchwork: https://patchwork.linux-mips.org/patch/6391/ Signed-off-by: Ralf Baechle <[email protected]> commit 27410e8 Author: Daniel Vetter <[email protected]> Date: Thu Jan 30 17:58:38 2014 +0100 drm: Fix use-after-free in the shadow-attache exit code This regression has been introduced in commit b3f2333 Author: Daniel Vetter <[email protected]> Date: Wed Dec 11 11:34:31 2013 +0100 drm: restrict the device list for shadow attached drivers Reported-by: Dave Jones <[email protected]> Signed-off-by: Daniel Vetter <[email protected]> Reviewed-by: David Herrmann <[email protected]> Signed-off-by: Dave Airlie <[email protected]> commit 06e2e88 Author: Paul Burton <[email protected]> Date: Fri Feb 14 17:55:18 2014 +0000 MIPS: mark O32+FP64 experimental for now Commit 597ce17 "MIPS: Support for 64-bit FP with O32 binaries" introduced support for setting Status.FR=1 for O32 binaries with the EF_MIPS_FP64 ELF header flag set. Whilst this flag is currently supported by binutils it does introduce an ABI break within userland. Objects built with EF_MIPS_FP64 cannot be safely linked with those built without it since code in either object may assume behaviour specific to a value of FR. More recently there has been discussion around avoiding further fragmentation of the O32 ABI whilst still allowing the use of FR=1 and features such as MSA which depend upon it. Details of the plan to allow this are still being worked on, and whilst the kernel will need the ability to handle FR=1 with O32 tasks it is unclear what else it may need to provide to a userland which seeks to avoid another ABI break. In order to prevent the proliferation of userland which may rely upon the current EF_MIPS_FP64 behaviour this patch marks the kernel support for it experimental & disables it by default. Under current proposals it is likely that this support can simply be enabled again later, but possibly after the introduction of further interfaces with userland and support for the MIPS R5 UFR feature. Signed-off-by: Paul Burton <[email protected]> Cc: Matthew Fortune <[email protected]> Cc: [email protected] Cc: Paul Burton <[email protected]> Patchwork: https://patchwork.linux-mips.org/patch/6549/ Signed-off-by: Ralf Baechle <[email protected]> commit a467109 Author: Viller Hsiao <[email protected]> Date: Sat Feb 22 15:46:49 2014 +0800 MIPS: ftrace: Fix icache flush range error In 32-bit mode, the start address passed to flush_icache_range is shifted by 4 bytes before the second safe_store_code() call. This causes system crash from time to time because the first 4 bytes might not be flushed properly. This bug exists since linux-3.8. Also remove obsoleted comment while at it. Signed-off-by: Viller Hsiao <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Patchwork: https://patchwork.linux-mips.org/patch/6586/ Signed-off-by: Ralf Baechle <[email protected]> commit 86ca57b Author: Lars Persson <[email protected]> Date: Mon Mar 17 12:14:13 2014 +0100 MIPS: Fix syscall tracing interface Fix pointer computation for stack-based arguments. Signed-off-by: Lars Persson <[email protected]> Cc: [email protected] Patchwork: https://patchwork.linux-mips.org/patch/6620/ Signed-off-by: Ralf Baechle <[email protected]> commit a8031d2 Author: Markos Chandras <[email protected]> Date: Wed Jan 22 14:39:57 2014 +0000 MIPS: asm: syscall: Fix copying system call arguments The syscall_get_arguments function expects the arguments to be copied to the '*args' argument but instead a local variable was used to hold the system call argument. As a result of which, this variable was never passed to the filter and any filter testing the system call arguments would fail. This is fixed by passing the '*args' variable as the destination memory for the system call arguments. Signed-off-by: Markos Chandras <[email protected]> Reviewed-by: Paul Burton <[email protected]> Reviewed-by: James Hogan <[email protected]> Cc: [email protected] Patchwork: https://patchwork.linux-mips.org/patch/6402/ Signed-off-by: Ralf Baechle <[email protected]> commit 7f02c46 Author: Colin Ian King <[email protected]> Date: Mon Feb 10 18:42:57 2014 +0000 MIPS: Octeon: Fix fall through on bar type OCTEON_DMA_BAR_TYPE_SMALL Bar type OCTEON_DMA_BAR_TYPE_SMALL assigns lo and hi addresses and then falls through to OCTEON_DMA_BAR_TYPE_BIG that re-assignes lo and hi addresses with totally different values. Add a break so we don't fall through. Signed-off-by: Colin Ian King <[email protected]> Acked-by: David Daney <[email protected]> Cc: [email protected] Cc: [email protected] Patchwork: https://patchwork.linux-mips.org/patch/6529/ Signed-off-by: Ralf Baechle <[email protected]> commit b616365 Author: Huacai Chen <[email protected]> Date: Fri Feb 7 22:31:33 2014 +0800 MIPS: FPU: Fix conflict of register usage In _restore_fp_context/_restore_fp_context32, t0 is used for both CP0_Status and CP1_FCSR. This is a mistake and cause FP exeception on boot, so fix it. Signed-off-by: Huacai Chen <[email protected]> Tested-by: Aaro Koskinen <[email protected]> Tested-by: Andreas Barth <[email protected]> Cc: John Crispin <[email protected]> Cc: Steven J. Hill <[email protected]> Cc: Aurelien Jarno <[email protected]> Cc: [email protected] Cc: Fuxin Zhang <[email protected]> Cc: Zhangjin Wu <[email protected]> Patchwork: https://patchwork.linux-mips.org/patch/6507/ Signed-off-by: Ralf Baechle <[email protected]> commit f5868f0 Author: Paul Bolle <[email protected]> Date: Sun Feb 9 14:32:25 2014 +0100 MIPS: Replace CONFIG_MIPS64 and CONFIG_MIPS32_R2 Commit 597ce17 ("MIPS: Support for 64-bit FP with O32 binaries") introduced references to two undefined Kconfig macros. CONFIG_MIPS32_R2 should clearly be replaced with CONFIG_CPU_MIPS32_R2. And CONFIG_MIPS64 should be replaced with CONFIG_64BIT. Signed-off-by: Paul Bolle <[email protected]> Cc: [email protected] Cc: [email protected] Patchwork: https://patchwork.linux-mips.org/patch/6522/ Tested-by: Aaro Koskinen <[email protected]> Signed-off-by: Ralf Baechle <[email protected]> commit 6b5625b Author: Simon Wood <[email protected]> Date: Thu Mar 13 12:42:03 2014 -0600 HID: hid-lg4ff: Support new version of G27 It has been reported that there is a new hardware version of the G27 in the 'wild'. This patch add's this new revision so that it can be sent the command to switch to native mode. Reported-by: "Ivan Baldo" <[email protected]> Tested-by: "evilcow" <[email protected]> Signed-off-by: Simon Wood <[email protected]> Signed-off-by: Jiri Kosina <[email protected]> commit e724f08 Author: Paul Mackerras <[email protected]> Date: Thu Mar 13 20:02:48 2014 +1100 KVM: PPC: Book3S HV: Fix register usage when loading/saving VRSAVE Commit 595e4f7 ("KVM: PPC: Book3S HV: Use load/store_fp_state functions in HV guest entry/exit") changed the register usage in kvmppc_save_fp() and kvmppc_load_fp() but omitted changing the instructions that load and save VRSAVE. The result is that the VRSAVE value was loaded from a constant address, and saved to a location past the end of the vcpu struct, causing host kernel memory corruption and various kinds of host kernel crashes. This fixes the problem by using register r31, which contains the vcpu pointer, instead of r3 and r4. Signed-off-by: Paul Mackerras <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]> commit a5b0ccb Author: Paul Mackerras <[email protected]> Date: Thu Mar 13 20:02:02 2014 +1100 KVM: PPC: Book3S HV: Remove bogus duplicate code Commit 7b49041 ("KVM: PPC: Book3S HV: Add new state for transactional memory") incorrectly added some duplicate code to the guest exit path because I didn't manage to clean up after a rebase correctly. This removes the extraneous material. The presence of this extraneous code causes host crashes whenever a guest is run. Signed-off-by: Paul Mackerras <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]> commit 5c673b6 Author: Daniel Vetter <[email protected]> Date: Fri Mar 7 20:34:46 2014 +0100 drm/i915: Don't enable display error interrupts from the start We need to enable interrupt processing before all the modeset state is set up. But that means we can fall over when we get a pipe underrun. This shouldn't happen as long as the bios works correctly but as usual this turns out to be wishful thinking. So disable error interrupts at irq install time and rely on the re-enabling code in the modeset functions to take care of this. Note that due to the SDE interrupt handling race we must uncondtionally enable all interrupt sources in SDEIER, hence no need to enable the SERR bit specifically. On gmch platforms we don't have an explicit enable/mask bit for fifo underruns. Fixing this up would require a bit of software tracking, hence is material for a separate patch. To make this possible we need to switch all gmch platforms to the new pipestat interrupt handling scheme Imre implemented for vlv, and then also add a safe form of sw state checking to __cpu_fifo_underrun_reporting_enabled a bit. v2: Also handle the ilk/snb cpu fifo underrun bits accordingly. Spotted by Ville. v3: Also handle the south interrupt underrun bits on ibx. Again spotted by Ville. Reported-by: Rob Clark <[email protected]> Cc: Rob Clark <[email protected]> Cc: Ville Syrjälä <[email protected]> Cc: [email protected] Tested-by: Ville Syrjälä <[email protected]> Reviewed-by: Ville Syrjälä <[email protected]> Signed-off-by: Daniel Vetter <[email protected]> Signed-off-by: Jani Nikula <[email protected]> commit 2430262 Author: Ville Syrjälä <[email protected]> Date: Tue Mar 11 12:58:46 2014 +0200 drm/i915: Fix scanline counter fixup on BDW The display interrupts changed on BDW, so the current ILK-HSW specific code in ilk_pipe_in_vblank_locked() doesn't work there. Add the required bits for BDW, and while at it, change the existing code to use nicer looking vblank status bit macros. Also remove the now stale __raw_i915_read16() definition which was left over from the failed gen2 ISR experiment. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=73962 Tested-by: Lu Hua <[email protected]> Reviewed-by: Mika Kuoppala <[email protected]> Signed-off-by: Ville Syrjälä <[email protected]> Signed-off-by: Jani Nikula <[email protected]> commit fcb8182 Author: Ville Syrjälä <[email protected]> Date: Tue Mar 11 12:58:45 2014 +0200 drm/i915: Add a workaround for HSW scanline counter weirdness On HSW the scanline counter seems to behave differently depending on the output type. eDP on port A does what you would expect an the normal +1 fixup is sufficient to cover it. But on HDMI outputs we seem to need a +2 fixup. Just assume we always need the +2 fixup and accept the slight inaccuracy on eDP. This fixes a regression introduced in: commit 8072bfa Author: Ville Syrjälä <[email protected]> Date: Mon Oct 28 21:22:52 2013 +0200 drm/radeon: Move the early vblank IRQ fixup to radeon_get_crtc_scanoutpos() That commit removed the heuristic that tried to fix up the timestamps for vblank interrupts that fire a bit too early. Since then the vblank timestamp code would treat some vblank interrupts as spurious since the scanline counter would indicate that vblank_start wasn't reached yet. That in turn lead to incorrect vblank event sequence numbers being reported to userspace, which lead to unsteady framerate in applications such as XBMC which uses them for timing purposes. v2: Remember to call ilk_pipe_in_vblank_locked() on HSW too (Mika) Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=75725 Tested-by: [email protected] Reviewed-by: Mika Kuoppala <[email protected]> Signed-off-by: Ville Syrjälä <[email protected]> Signed-off-by: Jani Nikula <[email protected]> commit 51061b8 Author: Deng-Cheng Zhu <[email protected]> Date: Thu Mar 6 17:05:27 2014 -0800 MIPS: math-emu: Fix prefx detection and COP1X function field definition When running applications which contain the instruction "prefx" on FPU-less CPUs, a message "Illegal instruction" will be seen. This instruction is supposed to be ignored by the FPU emulator. However, its current detection and function field encoding are incorrect. This patch fix the issue. Signed-off-by: Deng-Cheng Zhu <[email protected]> Reviewed-by: Leonid Yegoshin <[email protected]> Reviewed-by: Paul Burton <[email protected]> Acked-by: David Daney <[email protected]> Cc: [email protected] Cc: [email protected] Patchwork: https://patchwork.linux-mips.org/patch/6608/ Signed-off-by: Ralf Baechle <[email protected]> commit 7f32890 Author: Jens Axboe <[email protected]> Date: Mon Mar 10 14:29:37 2014 -0600 mtip32xx: fix bad use of smp_processor_id() mtip_pci_probe() dumps the current CPU when loaded, but it does so in a preemptible context. Hence smp_processor_id() correctly warns: BUG: using smp_processor_id() in preemptible [00000000] code: systemd-udevd/155 caller is mtip_pci_probe+0x53/0x880 [mtip32xx] Switch to raw_smp_processor_id(), since it's just informational and persistent accuracy isn't important. Signed-off-by: Jens Axboe <[email protected]> commit 10beafc Author: Mike Snitzer <[email protected]> Date: Sat Mar 8 20:19:20 2014 -0700 block: change flush sequence list addition back to front add Commit 1874198 inadvertently changed the rq flush insertion from a head to a tail insertion. Fix that back up. Signed-off-by: Mike Snitzer <[email protected]> Signed-off-by: Jens Axboe <[email protected]> commit 7982e90 Author: Mike Snitzer <[email protected]> Date: Sat Mar 8 17:20:01 2014 -0700 block: fix q->flush_rq NULL pointer crash on dm-mpath flush Commit 1874198 ("blk-mq: rework flush sequencing logic") switched ->flush_rq from being an embedded member of the request_queue structure to being dynamically allocated in blk_init_queue_node(). Request-based DM multipath doesn't use blk_init_queue_node(), instead it uses blk_alloc_queue_node() + blk_init_allocated_queue(). Because commit 1874198 placed the dynamic allocation of ->flush_rq in blk_init_queue_node() any flush issued to a dm-mpath device would crash with a NULL pointer, e.g.: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffff8125037e>] blk_rq_init+0x1e/0xb0 PGD bb3c7067 PUD bb01d067 PMD 0 Oops: 0002 [#1] SMP ... CPU: 5 PID: 5028 Comm: dt Tainted: G W O 3.14.0-rc3.snitm+ torvalds#10 ... task: ffff88032fb270e0 ti: ffff880079564000 task.ti: ffff880079564000 RIP: 0010:[<ffffffff8125037e>] [<ffffffff8125037e>] blk_rq_init+0x1e/0xb0 RSP: 0018:ffff880079565c98 EFLAGS: 00010046 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000030 RDX: ffff880260c74048 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffff880079565ca8 R08: ffff880260aa1e98 R09: 0000000000000001 R10: ffff88032fa78500 R11: 0000000000000246 R12: 0000000000000000 R13: ffff880260aa1de8 R14: 0000000000000650 R15: 0000000000000000 FS: 00007f8d36a2a700(0000) GS:ffff88033fca0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000000079b36000 CR4: 00000000000007e0 Stack: 0000000000000000 ffff880260c74048 ffff880079565cd8 ffffffff81257a47 ffff880260aa1de8 ffff880260c74048 0000000000000001 0000000000000000 ffff880079565d08 ffffffff81257c2d 0000000000000000 ffff880260aa1de8 Call Trace: [<ffffffff81257a47>] blk_flush_complete_seq+0x2d7/0x2e0 [<ffffffff81257c2d>] blk_insert_flush+0x1dd/0x210 [<ffffffff8124ec59>] __elv_add_request+0x1f9/0x320 [<ffffffff81250681>] ? blk_account_io_start+0x111/0x190 [<ffffffff81253a4b>] blk_queue_bio+0x25b/0x330 [<ffffffffa0020bf5>] dm_request+0x35/0x40 [dm_mod] [<ffffffff812530c0>] generic_make_request+0xc0/0x100 [<ffffffff81253173>] submit_bio+0x73/0x140 [<ffffffff811becdd>] submit_bio_wait+0x5d/0x80 [<ffffffff81257528>] blkdev_issue_flush+0x78/0xa0 [<ffffffff811c1f6f>] blkdev_fsync+0x3f/0x60 [<ffffffff811b7fde>] vfs_fsync_range+0x1e/0x20 [<ffffffff811b7ffc>] vfs_fsync+0x1c/0x20 [<ffffffff811b81f1>] do_fsync+0x41/0x80 [<ffffffff8118874e>] ? SyS_lseek+0x7e/0x80 [<ffffffff811b8260>] SyS_fsync+0x10/0x20 [<ffffffff8154c2d2>] system_call_fastpath+0x16/0x1b Fix this by moving the ->flush_rq allocation from blk_init_queue_node() to blk_init_allocated_queue(). blk_init_queue_node() also calls blk_init_allocated_queue() so this change is functionality equivalent for all blk_init_queue_node() callers. Reported-by: Hannes Reinecke <[email protected]> Reported-by: Christoph Hellwig <[email protected]> Signed-off-by: Mike Snitzer <[email protected]> Signed-off-by: Jens Axboe <[email protected]> commit 031365b Author: Deng-Cheng Zhu <[email protected]> Date: Fri Feb 28 10:23:03 2014 -0800 MIPS: APRP: Choose the correct VPE loader by fixing the linking Now we have CONFIG_MIPS_VPE_LOADER and CONFIG_MIPS_VPE_LOADER_[CMP|MT]. The latter two are used by the 2 exclusive flavors. The vpe_run in malta-amon.c is for CMP APRP. Without the fix, this vpe_run will be used in MT APRP. Reviewed-by: Steven J. Hill <[email protected]> Signed-off-by: Deng-Cheng Zhu <[email protected]> Cc: [email protected] Cc: [email protected] Patchwork: https://patchwork.linux-mips.org/patch/6589/ Signed-off-by: Ralf Baechle <[email protected]> commit eee5794 Author: Deng-Cheng Zhu <[email protected]> Date: Fri Feb 28 10:23:02 2014 -0800 MIPS: APRP: Unregister rtlx interrupt hook at module exit If the aprp_hook is not assigned back to NULL, it will still be called after module exits. This is not wanted. Reviewed-by: Steven J. Hill <[email protected]> Signed-off-by: Deng-Cheng Zhu <[email protected]> Cc: [email protected] Cc: [email protected] Patchwork: https://patchwork.linux-mips.org/patch/6590/ Signed-off-by: Ralf Baechle <[email protected]> commit 9c1f6e0 Author: Deng-Cheng Zhu <[email protected]> Date: Fri Feb 28 10:23:01 2014 -0800 MIPS: APRP: Fix the linking of rtlx interrupt hook There are 2 errors with the existing aprp_hook linking: - The prefix CONFIG_ is missing; - The hook should be linked exclusively in the cases of MT and CMP. Signed-off-by: Deng-Cheng Zhu <[email protected]> Reviewed-by: Steven J. Hill <[email protected]> Cc: [email protected] Cc: [email protected] Patchwork: https://patchwork.linux-mips.org/patch/6588/ Signed-off-by: Ralf Baechle <[email protected]> commit 4890e2e Author: Markos Chandras <[email protected]> Date: Wed Feb 19 10:17:18 2014 +0000 MIPS: bcm47xx: Include missing errno.h for ENXIO Fixes the following build problen on allmodconfig: arch/mips/bcm47xx/board.c: In function 'bcm47xx_board_detect': arch/mips/bcm47xx/board.c:291:14: error: 'ENXIO' undeclared (first use in this function) Signed-off-by: Markos Chandras <[email protected]> Cc: [email protected] Patchwork: https://patchwork.linux-mips.org/patch/6571/ Signed-off-by: Ralf Baechle <[email protected]> commit d334c2b Author: Manuel Lauss <[email protected]> Date: Thu Feb 20 14:37:40 2014 +0100 MIPS: Alchemy: Fix unchecked kstrtoul return value enabled __must_check logic triggers a build error for mtx1 and gpr in the prom init code. Fix by checking the kstrtoul() return value. Signed-off-by: Manuel Lauss <[email protected]> Cc: Linux-MIPS <[email protected]> Patchwork: https://patchwork.linux-mips.org/patch/6574/ Signed-off-by: Ralf Baechle <[email protected]> commit f517928 Author: Ralf Baechle <[email protected]> Date: Mon Feb 10 18:00:17 2014 +0100 MIPS: Fix randconfig build error. CC arch/mips/kernel/ptrace.o In file included from arch/mips/kernel/ptrace.c:42:0: arch/mips/kernel/ptrace.c: In function ‘mips_get_syscall_arg’: /home/ralf/src/linux/linux-mips/arch/mips/include/asm/syscall.h:60:1: error: control reaches end of non-void function [-Werror=return-type] cc1: all warnings being treated as errors make[2]: *** [arch/mips/kernel/ptrace.o] Error 1 make[1]: *** [arch/mips/kernel] Error 2 make: *** [arch/mips] Error 2 Fixed by marking the end of mips_get_syscall_arg() as unreachable. Signed-off-by: Ralf Baechle <[email protected]> commit 24bd9bf Author: Ben Widawsky <[email protected]> Date: Tue Mar 4 22:38:10 2014 -0800 drm/i915: Fix PSR programming | has a higher precedence than ?. Therefore, the calculation doesn't do at all what you would expect. Thanks to Ken for convincing me that this was indeed the issue. Send me back to C programmer school, please. I'm sort of surprised PSR was continuing to work for people. It should be broken IMO (and it was broken for me, but I had assumed it never worked). Regression from: commit ed8546a Author: Ben Widawsky <[email protected]> Date: Mon Nov 4 22:45:05 2013 -0800 drm/i915/bdw: Support eDP PSR Cc: Rodrigo Vivi <[email protected]> Cc: Kenneth Graunke <[email protected]> Cc: Art Runyan <[email protected]> Reported-by: "Kumar, Kiran S" <[email protected]> Cc: [email protected] [v3.13+] Signed-off-by: Ben Widawsky <[email protected]> Signed-off-by: Jani Nikula <[email protected]> commit 224aa3e Author: Stefan Agner <[email protected]> Date: Wed Mar 5 23:11:08 2014 +0100 clocksource: vf_pit_timer: use complement for sched_clock reading Vybrids PIT register is monitonic decreasing. However, sched_clock reading needs to be monitonic increasing. Use bitwise not to get the complement of the clock register. This fixes the clock going backward. Also, the clock now starts at 0 since we load the register with the maximum value at start. Signed-off-by: Stefan Agner <[email protected]> Acked-by: Shawn Guo <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Link: http://lkml.kernel.org/r/d25af915993aec1b486be653eb86f748ddef54fe.1394057313.git.stefan@agner.ch Cc: [email protected] Signed-off-by: Thomas Gleixner <[email protected]> commit 47587fc Author: Fernando Luis Vázquez Cao <[email protected]> Date: Wed Feb 26 16:51:24 2014 +0900 HID: hidraw: fix warning destroying hidraw device files after parent I noticed that after hot unplugging a Logitech unifying receiver (drivers/hid/hid-logitech-dj.c) the kernel would occasionally spew a stack trace similar to this: usb 1-1.1.2: USB disconnect, device number 7 WARNING: CPU: 0 PID: 2865 at fs/sysfs/group.c:216 device_del+0x40/0x1b0() sysfs group ffffffff8187fa20 not found for kobject 'hidraw0' [...] CPU: 0 PID: 2865 Comm: upowerd Tainted: G W 3.14.0-rc4 torvalds#7 Hardware name: LENOVO 7783PN4/ , BIOS 9HKT43AUS 07/11/2011 0000000000000009 ffffffff814cd684 ffff880427ccfdf8 ffffffff810616e7 ffff88041ec61800 ffff880427ccfe48 ffff88041e444d80 ffff880426fab8e8 ffff880429359960 ffffffff8106174c ffffffff81714b98 0000000000000028 Call Trace: [<ffffffff814cd684>] ? dump_stack+0x41/0x51 [<ffffffff810616e7>] ? warn_slowpath_common+0x77/0x90 [<ffffffff8106174c>] ? warn_slowpath_fmt+0x4c/0x50 [<ffffffff81374fd0>] ? device_del+0x40/0x1b0 [<ffffffff8137516f>] ? device_unregister+0x2f/0x50 [<ffffffff813751fa>] ? device_destroy+0x3a/0x40 [<ffffffffa03ca245>] ? drop_ref+0x55/0x120 [hid] [<ffffffffa03ca3e6>] ? hidraw_release+0x96/0xb0 [hid] [<ffffffff811929da>] ? __fput+0xca/0x210 [<ffffffff8107fe17>] ? task_work_run+0x97/0xd0 [<ffffffff810139a9>] ? do_notify_resume+0x69/0xa0 [<ffffffff814dbd22>] ? int_signal+0x12/0x17 ---[ end trace 63f4a46f6566d737 ]--- During device removal hid_disconnect() is called via hid_hw_stop() to stop the device and free all its resources, including the sysfs files. The problem is that if a user space process, such as upowerd, holds a reference to a hidraw file the corresponding sysfs files will be kept around (drop_ref() does not call device_destroy() if the open counter is not 0) and it will be usb_disconnect() who, by calling device_del() for the USB device, will indirectly remove the sysfs files of the hidraw device (sysfs_remove_dir() is recursive these days). Because of this, by the time user space releases the last reference to the hidraw file and drop_ref() tries to destroy the device the sysfs files are already gone and the kernel will print the warning above. Fix this by calling device_destroy() at USB disconnect time. Signed-off-by: Fernando Luis Vazquez Cao <[email protected]> Reviewed-by: David Herrmann <[email protected]> Cc: [email protected] # 3.13 Signed-off-by: Jiri Kosina <[email protected]> commit 5f5750d Author: Frank Praznik <[email protected]> Date: Wed Feb 19 13:09:22 2014 -0500 HID: sony: Fix work queue issues. Don't initialize force-feedback for devices that don't support it to avoid calls to schedule_work() with an uninitialized work_struct. Move the cancel_work_sync() call out of sony_destroy_ff() since the state worker is used for the LEDs even when force-feedback is disabled. Remove sony_destroy_ff() to avoid a compiler warning since it is no longer used. Signed-off-by: Frank Praznik <[email protected]> Signed-off-by: Jiri Kosina <[email protected]>
gregnietsky
pushed a commit
to Distrotech/linux
that referenced
this pull request
Apr 9, 2014
commit 13ad177 upstream. Ed Swierk <[email protected]> writes: > On 2.6.35.7 > ip link add link eth0 netns 9999 type macvlan > where 9999 is a nonexistent PID triggers an oops and causes all network functions to hang: > [10663.821898] BUG: unable to handle kernel NULL pointer dereference at 000000000000006d > [10663.821917] IP: [<ffffffff8149c2fa>] __dev_alloc_name+0x9a/0x170 > [10663.821933] PGD 1d3927067 PUD 22f5c5067 PMD 0 > [10663.821944] Oops: 0000 [#1] SMP > [10663.821953] last sysfs file: /sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq > [10663.821959] CPU 3 > [10663.821963] Modules linked in: macvlan ip6table_filter ip6_tables rfcomm ipt_MASQUERADE binfmt_misc iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack sco ipt_REJECT bnep l2cap xt_tcpudp iptable_filter ip_tables x_tables bridge stp vboxnetadp vboxnetflt vboxdrv kvm_intel kvm parport_pc ppdev snd_hda_codec_intelhdmi snd_hda_codec_conexant arc4 iwlagn iwlcore mac80211 snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_seq_midi snd_rawmidi i915 snd_seq_midi_event snd_seq thinkpad_acpi drm_kms_helper btusb tpm_tis nvram uvcvideo snd_timer snd_seq_device bluetooth videodev v4l1_compat v4l2_compat_ioctl32 tpm drm tpm_bios snd cfg80211 psmouse serio_raw intel_ips soundcore snd_page_alloc intel_agp i2c_algo_bit video output netconsole configfs lp parport usbhid hid e1000e sdhci_pci ahci libahci sdhci led_class > [10663.822155] > [10663.822161] Pid: 6000, comm: ip Not tainted 2.6.35-23-generic torvalds#41-Ubuntu 2901CTO/2901CTO > [10663.822167] RIP: 0010:[<ffffffff8149c2fa>] [<ffffffff8149c2fa>] __dev_alloc_name+0x9a/0x170 > [10663.822177] RSP: 0018:ffff88014aebf7b8 EFLAGS: 00010286 > [10663.822182] RAX: 00000000fffffff4 RBX: ffff8801ad900800 RCX: 0000000000000000 > [10663.822187] RDX: ffff880000000000 RSI: 0000000000000000 RDI: ffff88014ad63000 > [10663.822191] RBP: ffff88014aebf808 R08: 0000000000000041 R09: 0000000000000041 > [10663.822196] R10: 0000000000000000 R11: dead000000200200 R12: ffff88014aebf818 > [10663.822201] R13: fffffffffffffffd R14: ffff88014aebf918 R15: ffff88014ad62000 > [10663.822207] FS: 00007f00c487f700(0000) GS:ffff880001f80000(0000) knlGS:0000000000000000 > [10663.822212] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 > [10663.822216] CR2: 000000000000006d CR3: 0000000231f19000 CR4: 00000000000026e0 > [10663.822221] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 > [10663.822226] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 > [10663.822231] Process ip (pid: 6000, threadinfo ffff88014aebe000, task ffff88014afb16e0) > [10663.822236] Stack: > [10663.822240] ffff88014aebf808 ffffffff814a2bb5 ffff88014aebf7e8 00000000a00ee8d6 > [10663.822251] <0> 0000000000000000 ffffffffa00ef940 ffff8801ad900800 ffff88014aebf818 > [10663.822265] <0> ffff88014aebf918 ffff8801ad900800 ffff88014aebf858 ffffffff8149c413 > [10663.822281] Call Trace: > [10663.822290] [<ffffffff814a2bb5>] ? dev_addr_init+0x75/0xb0 > [10663.822298] [<ffffffff8149c413>] dev_alloc_name+0x43/0x90 > [10663.822307] [<ffffffff814a85ee>] rtnl_create_link+0xbe/0x1b0 > [10663.822314] [<ffffffff814ab2aa>] rtnl_newlink+0x48a/0x570 > [10663.822321] [<ffffffff814aafcc>] ? rtnl_newlink+0x1ac/0x570 > [10663.822332] [<ffffffff81030064>] ? native_x2apic_icr_read+0x4/0x20 > [10663.822339] [<ffffffff814a8c17>] rtnetlink_rcv_msg+0x177/0x290 > [10663.822346] [<ffffffff814a8aa0>] ? rtnetlink_rcv_msg+0x0/0x290 > [10663.822354] [<ffffffff814c25d9>] netlink_rcv_skb+0xa9/0xd0 > [10663.822360] [<ffffffff814a8a85>] rtnetlink_rcv+0x25/0x40 > [10663.822367] [<ffffffff814c223e>] netlink_unicast+0x2de/0x2f0 > [10663.822374] [<ffffffff814c303e>] netlink_sendmsg+0x1fe/0x2e0 > [10663.822383] [<ffffffff81488533>] sock_sendmsg+0xf3/0x120 > [10663.822391] [<ffffffff815899fe>] ? _raw_spin_lock+0xe/0x20 > [10663.822400] [<ffffffff81168656>] ? __d_lookup+0x136/0x150 > [10663.822406] [<ffffffff815899fe>] ? _raw_spin_lock+0xe/0x20 > [10663.822414] [<ffffffff812b7a0d>] ? _atomic_dec_and_lock+0x4d/0x80 > [10663.822422] [<ffffffff8116ea90>] ? mntput_no_expire+0x30/0x110 > [10663.822429] [<ffffffff81486ff5>] ? move_addr_to_kernel+0x65/0x70 > [10663.822435] [<ffffffff81493308>] ? verify_iovec+0x88/0xe0 > [10663.822442] [<ffffffff81489020>] sys_sendmsg+0x240/0x3a0 > [10663.822450] [<ffffffff8111e2a9>] ? __do_fault+0x479/0x560 > [10663.822457] [<ffffffff815899fe>] ? _raw_spin_lock+0xe/0x20 > [10663.822465] [<ffffffff8116cf4a>] ? alloc_fd+0x10a/0x150 > [10663.822473] [<ffffffff8158d76e>] ? do_page_fault+0x15e/0x350 > [10663.822482] [<ffffffff8100a0f2>] system_call_fastpath+0x16/0x1b > [10663.822487] Code: 90 48 8d 78 02 be 25 00 00 00 e8 92 1d e2 ff 48 85 c0 75 cf bf 20 00 00 00 e8 c3 b1 c6 ff 49 89 c7 b8 f4 ff ff ff 4d 85 ff 74 bd <4d> 8b 75 70 49 8d 45 70 48 89 45 b8 49 83 ee 58 eb 28 48 8d 55 > [10663.822618] RIP [<ffffffff8149c2fa>] __dev_alloc_name+0x9a/0x170 > [10663.822627] RSP <ffff88014aebf7b8> > [10663.822631] CR2: 000000000000006d > [10663.822636] ---[ end trace 3dfd6c3ad5327ca7 ]--- This bug was introduced in: commit 81adee4 Author: Eric W. Biederman <[email protected]> Date: Sun Nov 8 00:53:51 2009 -0800 net: Support specifying the network namespace upon device creation. There is no good reason to not support userspace specifying the network namespace during device creation, and it makes it easier to create a network device and pass it to a child network namespace with a well known name. We have to be careful to ensure that the target network namespace for the new device exists through the life of the call. To keep that logic clear I have factored out the network namespace grabbing logic into rtnl_link_get_net. In addtion we need to continue to pass the source network namespace to the rtnl_link_ops.newlink method so that we can find the base device source network namespace. Signed-off-by: Eric W. Biederman <[email protected]> Acked-by: Eric Dumazet <[email protected]> Where apparently I forgot to add error handling to the path where we create a new network device in a new network namespace, and pass in an invalid pid. Reported-by: Ed Swierk <[email protected]> Signed-off-by: "Eric W. Biederman" <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Paul Gortmaker <[email protected]>
tom3q
pushed a commit
to tom3q/linux
that referenced
this pull request
Jun 10, 2014
Code should be indented using tabs rather than spaces (see CodingStyle) and the canonical form to declare a constant static variable is using "static const" rather than "const static". Fixes the following warnings from checkpatch: $ scripts/checkpatch.pl -f drivers/gpu/drm/drm_plane_helper.c WARNING: storage class should be at the beginning of the declaration torvalds#40: FILE: drivers/gpu/drm/drm_plane_helper.c:40: +const static uint32_t safe_modeset_formats[] = { WARNING: please, no spaces at the start of a line torvalds#41: FILE: drivers/gpu/drm/drm_plane_helper.c:41: + DRM_FORMAT_XRGB8888,$ WARNING: please, no spaces at the start of a line torvalds#42: FILE: drivers/gpu/drm/drm_plane_helper.c:42: + DRM_FORMAT_ARGB8888,$ Signed-off-by: Thierry Reding <[email protected]> Reviewed-by: Matt Roper <[email protected]> Signed-off-by: Daniel Vetter <[email protected]>
swarren
pushed a commit
to swarren/linux-tegra
that referenced
this pull request
Jun 23, 2014
ERROR: trailing whitespace torvalds#41: FILE: fs/ocfs2/inode.c:1197: +^Ireturn 1; $ total: 1 errors, 0 warnings, 18 lines checked NOTE: whitespace errors detected, you may wish to use scripts/cleanpatch or scripts/cleanfile ./patches/ocfs2-free-inode-when-i_count-becomes-zero.patch has style problems, please review. If any of these errors are false positives, please report them to the maintainer, see CHECKPATCH in MAINTAINERS. Please run checkpatch prior to sending patches Cc: Xue jiufei <[email protected]> Signed-off-by: Andrew Morton <[email protected]>
Gnurou
pushed a commit
to Gnurou/linux
that referenced
this pull request
Jun 27, 2014
ERROR: trailing whitespace torvalds#41: FILE: fs/ocfs2/inode.c:1197: +^Ireturn 1; $ total: 1 errors, 0 warnings, 18 lines checked NOTE: whitespace errors detected, you may wish to use scripts/cleanpatch or scripts/cleanfile ./patches/ocfs2-free-inode-when-i_count-becomes-zero.patch has style problems, please review. If any of these errors are false positives, please report them to the maintainer, see CHECKPATCH in MAINTAINERS. Please run checkpatch prior to sending patches Cc: Xue jiufei <[email protected]> Signed-off-by: Andrew Morton <[email protected]>
JoonsooKim
pushed a commit
to JoonsooKim/linux
that referenced
this pull request
Jul 4, 2014
ERROR: trailing whitespace torvalds#41: FILE: fs/ocfs2/inode.c:1197: +^Ireturn 1; $ total: 1 errors, 0 warnings, 18 lines checked NOTE: whitespace errors detected, you may wish to use scripts/cleanpatch or scripts/cleanfile ./patches/ocfs2-free-inode-when-i_count-becomes-zero.patch has style problems, please review. If any of these errors are false positives, please report them to the maintainer, see CHECKPATCH in MAINTAINERS. Please run checkpatch prior to sending patches Cc: Xue jiufei <[email protected]> Signed-off-by: Andrew Morton <[email protected]>
ddstreet
pushed a commit
to ddstreet/linux
that referenced
this pull request
Jul 25, 2014
ERROR: trailing whitespace torvalds#41: FILE: fs/ocfs2/inode.c:1197: +^Ireturn 1; $ total: 1 errors, 0 warnings, 18 lines checked NOTE: whitespace errors detected, you may wish to use scripts/cleanpatch or scripts/cleanfile ./patches/ocfs2-free-inode-when-i_count-becomes-zero.patch has style problems, please review. If any of these errors are false positives, please report them to the maintainer, see CHECKPATCH in MAINTAINERS. Please run checkpatch prior to sending patches Cc: Xue jiufei <[email protected]> Signed-off-by: Andrew Morton <[email protected]>
heftig
referenced
this pull request
in zen-kernel/zen-kernel
Sep 6, 2014
commit 485d440 upstream. [ I'm currently running my tests on it now, and so far, after a few hours it has yet to blow up. I'll run it for 24 hours which it never succeeded in the past. ] The tracing code has a way to make directories within the debugfs file system as well as deleting them using mkdir/rmdir in the instance directory. This is very limited in functionality, such as there is no renames, and the parent directory "instance" can not be modified. The tracing code creates the instance directory from the debugfs code and then replaces the dentry->d_inode->i_op with its own to allow for mkdir/rmdir to work. When these are called, the d_entry and inode locks need to be released to call the instance creation and deletion code. That code has its own accounting and locking to serialize everything to prevent multiple users from causing harm. As the parent "instance" directory can not be modified this simplifies things. I created a stress test that creates several threads that randomly creates and deletes directories thousands of times a second. The code stood up to this test and I submitted it a while ago. Recently I added a new test that adds readers to the mix. While the instance directories were being added and deleted, readers would read from these directories and even enable tracing within them. This test was able to trigger a bug: general protection fault: 0000 [#1] PREEMPT SMP Modules linked in: ... CPU: 3 PID: 17789 Comm: rmdir Tainted: G W 3.15.0-rc2-test+ #41 Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./To be filled by O.E.M., BIOS SDBLI944.86P 05/08/2007 task: ffff88003786ca60 ti: ffff880077018000 task.ti: ffff880077018000 RIP: 0010:[<ffffffff811ed5eb>] [<ffffffff811ed5eb>] debugfs_remove_recursive+0x1bd/0x367 RSP: 0018:ffff880077019df8 EFLAGS: 00010246 RAX: 0000000000000002 RBX: ffff88006f0fe490 RCX: 0000000000000000 RDX: dead000000100058 RSI: 0000000000000246 RDI: ffff88003786d454 RBP: ffff88006f0fe640 R08: 0000000000000628 R09: 0000000000000000 R10: 0000000000000628 R11: ffff8800795110a0 R12: ffff88006f0fe640 R13: ffff88006f0fe640 R14: ffffffff81817d0b R15: ffffffff818188b7 FS: 00007ff13ae24700(0000) GS:ffff88007d580000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000003054ec7be0 CR3: 0000000076d51000 CR4: 00000000000007e0 Stack: ffff88007a41ebe0 dead000000100058 00000000fffffffe ffff88006f0fe640 0000000000000000 ffff88006f0fe678 ffff88007a41ebe0 ffff88003793a000 00000000fffffffe ffffffff810bde82 ffff88006f0fe640 ffff88007a41eb28 Call Trace: [<ffffffff810bde82>] ? instance_rmdir+0x15b/0x1de [<ffffffff81132e2d>] ? vfs_rmdir+0x80/0xd3 [<ffffffff81132f51>] ? do_rmdir+0xd1/0x139 [<ffffffff8124ad9e>] ? trace_hardirqs_on_thunk+0x3a/0x3c [<ffffffff814fea62>] ? system_call_fastpath+0x16/0x1b Code: fe ff ff 48 8d 75 30 48 89 df e8 c9 fd ff ff 85 c0 75 13 48 c7 c6 b8 cc d2 81 48 c7 c7 b0 cc d2 81 e8 8c 7a f5 ff 48 8b 54 24 08 <48> 8b 82 a8 00 00 00 48 89 d3 48 2d a8 00 00 00 48 89 44 24 08 RIP [<ffffffff811ed5eb>] debugfs_remove_recursive+0x1bd/0x367 RSP <ffff880077019df8> It took a while, but every time it triggered, it was always in the same place: list_for_each_entry_safe(child, next, &parent->d_subdirs, d_u.d_child) { Where the child->d_u.d_child seemed to be corrupted. I added lots of trace_printk()s to see what was wrong, and sure enough, it was always the child's d_u.d_child field. I looked around to see what touches it and noticed that in __dentry_kill() which calls dentry_free(): static void dentry_free(struct dentry *dentry) { /* if dentry was never visible to RCU, immediate free is OK */ if (!(dentry->d_flags & DCACHE_RCUACCESS)) __d_free(&dentry->d_u.d_rcu); else call_rcu(&dentry->d_u.d_rcu, __d_free); } I also noticed that __dentry_kill() unlinks the child->d_u.child under the parent->d_lock spin_lock. Looking back at the loop in debugfs_remove_recursive() it never takes the parent->d_lock to do the list walk. Adding more tracing, I was able to prove this was the issue: ftrace-t-15385 1.... 246662024us : dentry_kill <ffffffff81138b91>: free ffff88006d573600 rmdir-15409 2.... 246662024us : debugfs_remove_recursive <ffffffff811ec7e5>: child=ffff88006d573600 next=dead000000100058 The dentry_kill freed ffff88006d573600 just as the remove recursive was walking it. In order to fix this, the list walk needs to be modified a bit to take the parent->d_lock. The safe version is no longer necessary, as every time we remove a child, the parent->d_lock must be released and the list walk must start over. Each time a child is removed, even though it may still be on the list, it should be skipped by the first check in the loop: if (!debugfs_positive(child)) continue; Signed-off-by: Steven Rostedt <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
baerwolf
pushed a commit
to baerwolf/linux-stephan
that referenced
this pull request
Sep 19, 2014
commit 485d440 upstream. [ I'm currently running my tests on it now, and so far, after a few hours it has yet to blow up. I'll run it for 24 hours which it never succeeded in the past. ] The tracing code has a way to make directories within the debugfs file system as well as deleting them using mkdir/rmdir in the instance directory. This is very limited in functionality, such as there is no renames, and the parent directory "instance" can not be modified. The tracing code creates the instance directory from the debugfs code and then replaces the dentry->d_inode->i_op with its own to allow for mkdir/rmdir to work. When these are called, the d_entry and inode locks need to be released to call the instance creation and deletion code. That code has its own accounting and locking to serialize everything to prevent multiple users from causing harm. As the parent "instance" directory can not be modified this simplifies things. I created a stress test that creates several threads that randomly creates and deletes directories thousands of times a second. The code stood up to this test and I submitted it a while ago. Recently I added a new test that adds readers to the mix. While the instance directories were being added and deleted, readers would read from these directories and even enable tracing within them. This test was able to trigger a bug: general protection fault: 0000 [#1] PREEMPT SMP Modules linked in: ... CPU: 3 PID: 17789 Comm: rmdir Tainted: G W 3.15.0-rc2-test+ torvalds#41 Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./To be filled by O.E.M., BIOS SDBLI944.86P 05/08/2007 task: ffff88003786ca60 ti: ffff880077018000 task.ti: ffff880077018000 RIP: 0010:[<ffffffff811ed5eb>] [<ffffffff811ed5eb>] debugfs_remove_recursive+0x1bd/0x367 RSP: 0018:ffff880077019df8 EFLAGS: 00010246 RAX: 0000000000000002 RBX: ffff88006f0fe490 RCX: 0000000000000000 RDX: dead000000100058 RSI: 0000000000000246 RDI: ffff88003786d454 RBP: ffff88006f0fe640 R08: 0000000000000628 R09: 0000000000000000 R10: 0000000000000628 R11: ffff8800795110a0 R12: ffff88006f0fe640 R13: ffff88006f0fe640 R14: ffffffff81817d0b R15: ffffffff818188b7 FS: 00007ff13ae24700(0000) GS:ffff88007d580000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000003054ec7be0 CR3: 0000000076d51000 CR4: 00000000000007e0 Stack: ffff88007a41ebe0 dead000000100058 00000000fffffffe ffff88006f0fe640 0000000000000000 ffff88006f0fe678 ffff88007a41ebe0 ffff88003793a000 00000000fffffffe ffffffff810bde82 ffff88006f0fe640 ffff88007a41eb28 Call Trace: [<ffffffff810bde82>] ? instance_rmdir+0x15b/0x1de [<ffffffff81132e2d>] ? vfs_rmdir+0x80/0xd3 [<ffffffff81132f51>] ? do_rmdir+0xd1/0x139 [<ffffffff8124ad9e>] ? trace_hardirqs_on_thunk+0x3a/0x3c [<ffffffff814fea62>] ? system_call_fastpath+0x16/0x1b Code: fe ff ff 48 8d 75 30 48 89 df e8 c9 fd ff ff 85 c0 75 13 48 c7 c6 b8 cc d2 81 48 c7 c7 b0 cc d2 81 e8 8c 7a f5 ff 48 8b 54 24 08 <48> 8b 82 a8 00 00 00 48 89 d3 48 2d a8 00 00 00 48 89 44 24 08 RIP [<ffffffff811ed5eb>] debugfs_remove_recursive+0x1bd/0x367 RSP <ffff880077019df8> It took a while, but every time it triggered, it was always in the same place: list_for_each_entry_safe(child, next, &parent->d_subdirs, d_u.d_child) { Where the child->d_u.d_child seemed to be corrupted. I added lots of trace_printk()s to see what was wrong, and sure enough, it was always the child's d_u.d_child field. I looked around to see what touches it and noticed that in __dentry_kill() which calls dentry_free(): static void dentry_free(struct dentry *dentry) { /* if dentry was never visible to RCU, immediate free is OK */ if (!(dentry->d_flags & DCACHE_RCUACCESS)) __d_free(&dentry->d_u.d_rcu); else call_rcu(&dentry->d_u.d_rcu, __d_free); } I also noticed that __dentry_kill() unlinks the child->d_u.child under the parent->d_lock spin_lock. Looking back at the loop in debugfs_remove_recursive() it never takes the parent->d_lock to do the list walk. Adding more tracing, I was able to prove this was the issue: ftrace-t-15385 1.... 246662024us : dentry_kill <ffffffff81138b91>: free ffff88006d573600 rmdir-15409 2.... 246662024us : debugfs_remove_recursive <ffffffff811ec7e5>: child=ffff88006d573600 next=dead000000100058 The dentry_kill freed ffff88006d573600 just as the remove recursive was walking it. In order to fix this, the list walk needs to be modified a bit to take the parent->d_lock. The safe version is no longer necessary, as every time we remove a child, the parent->d_lock must be released and the list walk must start over. Each time a child is removed, even though it may still be on the list, it should be skipped by the first check in the loop: if (!debugfs_positive(child)) continue; Signed-off-by: Steven Rostedt <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> [bwh: Backported to 3.2: deleted code is slightly different; we don't have list_next_entry()] Signed-off-by: Ben Hutchings <[email protected]>
1054009064
pushed a commit
to 1054009064/linux
that referenced
this pull request
Nov 8, 2023
…cArray[entry].opts1 [ Upstream commit dcf75a0 ] KCSAN reported the following data-race: ================================================================== BUG: KCSAN: data-race in rtl8169_poll (drivers/net/ethernet/realtek/r8169_main.c:4368 drivers/net/ethernet/realtek/r8169_main.c:4581) r8169 race at unknown origin, with read to 0xffff888140d37570 of 4 bytes by interrupt on cpu 21: rtl8169_poll (drivers/net/ethernet/realtek/r8169_main.c:4368 drivers/net/ethernet/realtek/r8169_main.c:4581) r8169 __napi_poll (net/core/dev.c:6527) net_rx_action (net/core/dev.c:6596 net/core/dev.c:6727) __do_softirq (kernel/softirq.c:553) __irq_exit_rcu (kernel/softirq.c:427 kernel/softirq.c:632) irq_exit_rcu (kernel/softirq.c:647) sysvec_apic_timer_interrupt (arch/x86/kernel/apic/apic.c:1074 (discriminator 14)) asm_sysvec_apic_timer_interrupt (./arch/x86/include/asm/idtentry.h:645) cpuidle_enter_state (drivers/cpuidle/cpuidle.c:291) cpuidle_enter (drivers/cpuidle/cpuidle.c:390) call_cpuidle (kernel/sched/idle.c:135) do_idle (kernel/sched/idle.c:219 kernel/sched/idle.c:282) cpu_startup_entry (kernel/sched/idle.c:378 (discriminator 1)) start_secondary (arch/x86/kernel/smpboot.c:210 arch/x86/kernel/smpboot.c:294) secondary_startup_64_no_verify (arch/x86/kernel/head_64.S:433) value changed: 0xb0000042 -> 0x00000000 Reported by Kernel Concurrency Sanitizer on: CPU: 21 PID: 0 Comm: swapper/21 Tainted: G L 6.6.0-rc2-kcsan-00143-gb5cbe7c00aa0 torvalds#41 Hardware name: ASRock X670E PG Lightning/X670E PG Lightning, BIOS 1.21 04/26/2023 ================================================================== The read side is in drivers/net/ethernet/realtek/r8169_main.c ========================================= 4355 static void rtl_tx(struct net_device *dev, struct rtl8169_private *tp, 4356 int budget) 4357 { 4358 unsigned int dirty_tx, bytes_compl = 0, pkts_compl = 0; 4359 struct sk_buff *skb; 4360 4361 dirty_tx = tp->dirty_tx; 4362 4363 while (READ_ONCE(tp->cur_tx) != dirty_tx) { 4364 unsigned int entry = dirty_tx % NUM_TX_DESC; 4365 u32 status; 4366 → 4367 status = le32_to_cpu(tp->TxDescArray[entry].opts1); 4368 if (status & DescOwn) 4369 break; 4370 4371 skb = tp->tx_skb[entry].skb; 4372 rtl8169_unmap_tx_skb(tp, entry); 4373 4374 if (skb) { 4375 pkts_compl++; 4376 bytes_compl += skb->len; 4377 napi_consume_skb(skb, budget); 4378 } 4379 dirty_tx++; 4380 } 4381 4382 if (tp->dirty_tx != dirty_tx) { 4383 dev_sw_netstats_tx_add(dev, pkts_compl, bytes_compl); 4384 WRITE_ONCE(tp->dirty_tx, dirty_tx); 4385 4386 netif_subqueue_completed_wake(dev, 0, pkts_compl, bytes_compl, 4387 rtl_tx_slots_avail(tp), 4388 R8169_TX_START_THRS); 4389 /* 4390 * 8168 hack: TxPoll requests are lost when the Tx packets are 4391 * too close. Let's kick an extra TxPoll request when a burst 4392 * of start_xmit activity is detected (if it is not detected, 4393 * it is slow enough). -- FR 4394 * If skb is NULL then we come here again once a tx irq is 4395 * triggered after the last fragment is marked transmitted. 4396 */ 4397 if (READ_ONCE(tp->cur_tx) != dirty_tx && skb) 4398 rtl8169_doorbell(tp); 4399 } 4400 } tp->TxDescArray[entry].opts1 is reported to have a data-race and READ_ONCE() fixes this KCSAN warning. 4366 → 4367 status = le32_to_cpu(READ_ONCE(tp->TxDescArray[entry].opts1)); 4368 if (status & DescOwn) 4369 break; 4370 Cc: Heiner Kallweit <[email protected]> Cc: [email protected] Cc: "David S. Miller" <[email protected]> Cc: Eric Dumazet <[email protected]> Cc: Jakub Kicinski <[email protected]> Cc: Paolo Abeni <[email protected]> Cc: Marco Elver <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/lkml/[email protected]/ Signed-off-by: Mirsad Goran Todorovac <[email protected]> Acked-by: Marco Elver <[email protected]> Fixes: 1da177e ("Linux-2.6.12-rc2") Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
1054009064
pushed a commit
to 1054009064/linux
that referenced
this pull request
Nov 8, 2023
…>opts1 [ Upstream commit f97eee4 ] KCSAN reported the following data-race bug: ================================================================== BUG: KCSAN: data-race in rtl8169_poll (drivers/net/ethernet/realtek/r8169_main.c:4430 drivers/net/ethernet/realtek/r8169_main.c:4583) r8169 race at unknown origin, with read to 0xffff888117e43510 of 4 bytes by interrupt on cpu 21: rtl8169_poll (drivers/net/ethernet/realtek/r8169_main.c:4430 drivers/net/ethernet/realtek/r8169_main.c:4583) r8169 __napi_poll (net/core/dev.c:6527) net_rx_action (net/core/dev.c:6596 net/core/dev.c:6727) __do_softirq (kernel/softirq.c:553) __irq_exit_rcu (kernel/softirq.c:427 kernel/softirq.c:632) irq_exit_rcu (kernel/softirq.c:647) sysvec_apic_timer_interrupt (arch/x86/kernel/apic/apic.c:1074 (discriminator 14)) asm_sysvec_apic_timer_interrupt (./arch/x86/include/asm/idtentry.h:645) cpuidle_enter_state (drivers/cpuidle/cpuidle.c:291) cpuidle_enter (drivers/cpuidle/cpuidle.c:390) call_cpuidle (kernel/sched/idle.c:135) do_idle (kernel/sched/idle.c:219 kernel/sched/idle.c:282) cpu_startup_entry (kernel/sched/idle.c:378 (discriminator 1)) start_secondary (arch/x86/kernel/smpboot.c:210 arch/x86/kernel/smpboot.c:294) secondary_startup_64_no_verify (arch/x86/kernel/head_64.S:433) value changed: 0x80003fff -> 0x3402805f Reported by Kernel Concurrency Sanitizer on: CPU: 21 PID: 0 Comm: swapper/21 Tainted: G L 6.6.0-rc2-kcsan-00143-gb5cbe7c00aa0 torvalds#41 Hardware name: ASRock X670E PG Lightning/X670E PG Lightning, BIOS 1.21 04/26/2023 ================================================================== drivers/net/ethernet/realtek/r8169_main.c: ========================================== 4429 → 4430 status = le32_to_cpu(desc->opts1); 4431 if (status & DescOwn) 4432 break; 4433 4434 /* This barrier is needed to keep us from reading 4435 * any other fields out of the Rx descriptor until 4436 * we know the status of DescOwn 4437 */ 4438 dma_rmb(); 4439 4440 if (unlikely(status & RxRES)) { 4441 if (net_ratelimit()) 4442 netdev_warn(dev, "Rx ERROR. status = %08x\n", Marco Elver explained that dma_rmb() doesn't prevent the compiler to tear up the access to desc->opts1 which can be written to concurrently. READ_ONCE() should prevent that from happening: 4429 → 4430 status = le32_to_cpu(READ_ONCE(desc->opts1)); 4431 if (status & DescOwn) 4432 break; 4433 As the consequence of this fix, this KCSAN warning was eliminated. Fixes: 6202806 ("r8169: drop member opts1_mask from struct rtl8169_private") Suggested-by: Marco Elver <[email protected]> Cc: Heiner Kallweit <[email protected]> Cc: [email protected] Cc: "David S. Miller" <[email protected]> Cc: Eric Dumazet <[email protected]> Cc: Jakub Kicinski <[email protected]> Cc: Paolo Abeni <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/lkml/[email protected]/ Signed-off-by: Mirsad Goran Todorovac <[email protected]> Acked-by: Marco Elver <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
1054009064
pushed a commit
to 1054009064/linux
that referenced
this pull request
Nov 8, 2023
…cArray[entry].opts1 [ Upstream commit dcf75a0 ] KCSAN reported the following data-race: ================================================================== BUG: KCSAN: data-race in rtl8169_poll (drivers/net/ethernet/realtek/r8169_main.c:4368 drivers/net/ethernet/realtek/r8169_main.c:4581) r8169 race at unknown origin, with read to 0xffff888140d37570 of 4 bytes by interrupt on cpu 21: rtl8169_poll (drivers/net/ethernet/realtek/r8169_main.c:4368 drivers/net/ethernet/realtek/r8169_main.c:4581) r8169 __napi_poll (net/core/dev.c:6527) net_rx_action (net/core/dev.c:6596 net/core/dev.c:6727) __do_softirq (kernel/softirq.c:553) __irq_exit_rcu (kernel/softirq.c:427 kernel/softirq.c:632) irq_exit_rcu (kernel/softirq.c:647) sysvec_apic_timer_interrupt (arch/x86/kernel/apic/apic.c:1074 (discriminator 14)) asm_sysvec_apic_timer_interrupt (./arch/x86/include/asm/idtentry.h:645) cpuidle_enter_state (drivers/cpuidle/cpuidle.c:291) cpuidle_enter (drivers/cpuidle/cpuidle.c:390) call_cpuidle (kernel/sched/idle.c:135) do_idle (kernel/sched/idle.c:219 kernel/sched/idle.c:282) cpu_startup_entry (kernel/sched/idle.c:378 (discriminator 1)) start_secondary (arch/x86/kernel/smpboot.c:210 arch/x86/kernel/smpboot.c:294) secondary_startup_64_no_verify (arch/x86/kernel/head_64.S:433) value changed: 0xb0000042 -> 0x00000000 Reported by Kernel Concurrency Sanitizer on: CPU: 21 PID: 0 Comm: swapper/21 Tainted: G L 6.6.0-rc2-kcsan-00143-gb5cbe7c00aa0 torvalds#41 Hardware name: ASRock X670E PG Lightning/X670E PG Lightning, BIOS 1.21 04/26/2023 ================================================================== The read side is in drivers/net/ethernet/realtek/r8169_main.c ========================================= 4355 static void rtl_tx(struct net_device *dev, struct rtl8169_private *tp, 4356 int budget) 4357 { 4358 unsigned int dirty_tx, bytes_compl = 0, pkts_compl = 0; 4359 struct sk_buff *skb; 4360 4361 dirty_tx = tp->dirty_tx; 4362 4363 while (READ_ONCE(tp->cur_tx) != dirty_tx) { 4364 unsigned int entry = dirty_tx % NUM_TX_DESC; 4365 u32 status; 4366 → 4367 status = le32_to_cpu(tp->TxDescArray[entry].opts1); 4368 if (status & DescOwn) 4369 break; 4370 4371 skb = tp->tx_skb[entry].skb; 4372 rtl8169_unmap_tx_skb(tp, entry); 4373 4374 if (skb) { 4375 pkts_compl++; 4376 bytes_compl += skb->len; 4377 napi_consume_skb(skb, budget); 4378 } 4379 dirty_tx++; 4380 } 4381 4382 if (tp->dirty_tx != dirty_tx) { 4383 dev_sw_netstats_tx_add(dev, pkts_compl, bytes_compl); 4384 WRITE_ONCE(tp->dirty_tx, dirty_tx); 4385 4386 netif_subqueue_completed_wake(dev, 0, pkts_compl, bytes_compl, 4387 rtl_tx_slots_avail(tp), 4388 R8169_TX_START_THRS); 4389 /* 4390 * 8168 hack: TxPoll requests are lost when the Tx packets are 4391 * too close. Let's kick an extra TxPoll request when a burst 4392 * of start_xmit activity is detected (if it is not detected, 4393 * it is slow enough). -- FR 4394 * If skb is NULL then we come here again once a tx irq is 4395 * triggered after the last fragment is marked transmitted. 4396 */ 4397 if (READ_ONCE(tp->cur_tx) != dirty_tx && skb) 4398 rtl8169_doorbell(tp); 4399 } 4400 } tp->TxDescArray[entry].opts1 is reported to have a data-race and READ_ONCE() fixes this KCSAN warning. 4366 → 4367 status = le32_to_cpu(READ_ONCE(tp->TxDescArray[entry].opts1)); 4368 if (status & DescOwn) 4369 break; 4370 Cc: Heiner Kallweit <[email protected]> Cc: [email protected] Cc: "David S. Miller" <[email protected]> Cc: Eric Dumazet <[email protected]> Cc: Jakub Kicinski <[email protected]> Cc: Paolo Abeni <[email protected]> Cc: Marco Elver <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/lkml/[email protected]/ Signed-off-by: Mirsad Goran Todorovac <[email protected]> Acked-by: Marco Elver <[email protected]> Fixes: 1da177e ("Linux-2.6.12-rc2") Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
1054009064
pushed a commit
to 1054009064/linux
that referenced
this pull request
Nov 8, 2023
…>opts1 [ Upstream commit f97eee4 ] KCSAN reported the following data-race bug: ================================================================== BUG: KCSAN: data-race in rtl8169_poll (drivers/net/ethernet/realtek/r8169_main.c:4430 drivers/net/ethernet/realtek/r8169_main.c:4583) r8169 race at unknown origin, with read to 0xffff888117e43510 of 4 bytes by interrupt on cpu 21: rtl8169_poll (drivers/net/ethernet/realtek/r8169_main.c:4430 drivers/net/ethernet/realtek/r8169_main.c:4583) r8169 __napi_poll (net/core/dev.c:6527) net_rx_action (net/core/dev.c:6596 net/core/dev.c:6727) __do_softirq (kernel/softirq.c:553) __irq_exit_rcu (kernel/softirq.c:427 kernel/softirq.c:632) irq_exit_rcu (kernel/softirq.c:647) sysvec_apic_timer_interrupt (arch/x86/kernel/apic/apic.c:1074 (discriminator 14)) asm_sysvec_apic_timer_interrupt (./arch/x86/include/asm/idtentry.h:645) cpuidle_enter_state (drivers/cpuidle/cpuidle.c:291) cpuidle_enter (drivers/cpuidle/cpuidle.c:390) call_cpuidle (kernel/sched/idle.c:135) do_idle (kernel/sched/idle.c:219 kernel/sched/idle.c:282) cpu_startup_entry (kernel/sched/idle.c:378 (discriminator 1)) start_secondary (arch/x86/kernel/smpboot.c:210 arch/x86/kernel/smpboot.c:294) secondary_startup_64_no_verify (arch/x86/kernel/head_64.S:433) value changed: 0x80003fff -> 0x3402805f Reported by Kernel Concurrency Sanitizer on: CPU: 21 PID: 0 Comm: swapper/21 Tainted: G L 6.6.0-rc2-kcsan-00143-gb5cbe7c00aa0 torvalds#41 Hardware name: ASRock X670E PG Lightning/X670E PG Lightning, BIOS 1.21 04/26/2023 ================================================================== drivers/net/ethernet/realtek/r8169_main.c: ========================================== 4429 → 4430 status = le32_to_cpu(desc->opts1); 4431 if (status & DescOwn) 4432 break; 4433 4434 /* This barrier is needed to keep us from reading 4435 * any other fields out of the Rx descriptor until 4436 * we know the status of DescOwn 4437 */ 4438 dma_rmb(); 4439 4440 if (unlikely(status & RxRES)) { 4441 if (net_ratelimit()) 4442 netdev_warn(dev, "Rx ERROR. status = %08x\n", Marco Elver explained that dma_rmb() doesn't prevent the compiler to tear up the access to desc->opts1 which can be written to concurrently. READ_ONCE() should prevent that from happening: 4429 → 4430 status = le32_to_cpu(READ_ONCE(desc->opts1)); 4431 if (status & DescOwn) 4432 break; 4433 As the consequence of this fix, this KCSAN warning was eliminated. Fixes: 6202806 ("r8169: drop member opts1_mask from struct rtl8169_private") Suggested-by: Marco Elver <[email protected]> Cc: Heiner Kallweit <[email protected]> Cc: [email protected] Cc: "David S. Miller" <[email protected]> Cc: Eric Dumazet <[email protected]> Cc: Jakub Kicinski <[email protected]> Cc: Paolo Abeni <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/lkml/[email protected]/ Signed-off-by: Mirsad Goran Todorovac <[email protected]> Acked-by: Marco Elver <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
1054009064
pushed a commit
to 1054009064/linux
that referenced
this pull request
Nov 8, 2023
…cArray[entry].opts1 [ Upstream commit dcf75a0 ] KCSAN reported the following data-race: ================================================================== BUG: KCSAN: data-race in rtl8169_poll (drivers/net/ethernet/realtek/r8169_main.c:4368 drivers/net/ethernet/realtek/r8169_main.c:4581) r8169 race at unknown origin, with read to 0xffff888140d37570 of 4 bytes by interrupt on cpu 21: rtl8169_poll (drivers/net/ethernet/realtek/r8169_main.c:4368 drivers/net/ethernet/realtek/r8169_main.c:4581) r8169 __napi_poll (net/core/dev.c:6527) net_rx_action (net/core/dev.c:6596 net/core/dev.c:6727) __do_softirq (kernel/softirq.c:553) __irq_exit_rcu (kernel/softirq.c:427 kernel/softirq.c:632) irq_exit_rcu (kernel/softirq.c:647) sysvec_apic_timer_interrupt (arch/x86/kernel/apic/apic.c:1074 (discriminator 14)) asm_sysvec_apic_timer_interrupt (./arch/x86/include/asm/idtentry.h:645) cpuidle_enter_state (drivers/cpuidle/cpuidle.c:291) cpuidle_enter (drivers/cpuidle/cpuidle.c:390) call_cpuidle (kernel/sched/idle.c:135) do_idle (kernel/sched/idle.c:219 kernel/sched/idle.c:282) cpu_startup_entry (kernel/sched/idle.c:378 (discriminator 1)) start_secondary (arch/x86/kernel/smpboot.c:210 arch/x86/kernel/smpboot.c:294) secondary_startup_64_no_verify (arch/x86/kernel/head_64.S:433) value changed: 0xb0000042 -> 0x00000000 Reported by Kernel Concurrency Sanitizer on: CPU: 21 PID: 0 Comm: swapper/21 Tainted: G L 6.6.0-rc2-kcsan-00143-gb5cbe7c00aa0 torvalds#41 Hardware name: ASRock X670E PG Lightning/X670E PG Lightning, BIOS 1.21 04/26/2023 ================================================================== The read side is in drivers/net/ethernet/realtek/r8169_main.c ========================================= 4355 static void rtl_tx(struct net_device *dev, struct rtl8169_private *tp, 4356 int budget) 4357 { 4358 unsigned int dirty_tx, bytes_compl = 0, pkts_compl = 0; 4359 struct sk_buff *skb; 4360 4361 dirty_tx = tp->dirty_tx; 4362 4363 while (READ_ONCE(tp->cur_tx) != dirty_tx) { 4364 unsigned int entry = dirty_tx % NUM_TX_DESC; 4365 u32 status; 4366 → 4367 status = le32_to_cpu(tp->TxDescArray[entry].opts1); 4368 if (status & DescOwn) 4369 break; 4370 4371 skb = tp->tx_skb[entry].skb; 4372 rtl8169_unmap_tx_skb(tp, entry); 4373 4374 if (skb) { 4375 pkts_compl++; 4376 bytes_compl += skb->len; 4377 napi_consume_skb(skb, budget); 4378 } 4379 dirty_tx++; 4380 } 4381 4382 if (tp->dirty_tx != dirty_tx) { 4383 dev_sw_netstats_tx_add(dev, pkts_compl, bytes_compl); 4384 WRITE_ONCE(tp->dirty_tx, dirty_tx); 4385 4386 netif_subqueue_completed_wake(dev, 0, pkts_compl, bytes_compl, 4387 rtl_tx_slots_avail(tp), 4388 R8169_TX_START_THRS); 4389 /* 4390 * 8168 hack: TxPoll requests are lost when the Tx packets are 4391 * too close. Let's kick an extra TxPoll request when a burst 4392 * of start_xmit activity is detected (if it is not detected, 4393 * it is slow enough). -- FR 4394 * If skb is NULL then we come here again once a tx irq is 4395 * triggered after the last fragment is marked transmitted. 4396 */ 4397 if (READ_ONCE(tp->cur_tx) != dirty_tx && skb) 4398 rtl8169_doorbell(tp); 4399 } 4400 } tp->TxDescArray[entry].opts1 is reported to have a data-race and READ_ONCE() fixes this KCSAN warning. 4366 → 4367 status = le32_to_cpu(READ_ONCE(tp->TxDescArray[entry].opts1)); 4368 if (status & DescOwn) 4369 break; 4370 Cc: Heiner Kallweit <[email protected]> Cc: [email protected] Cc: "David S. Miller" <[email protected]> Cc: Eric Dumazet <[email protected]> Cc: Jakub Kicinski <[email protected]> Cc: Paolo Abeni <[email protected]> Cc: Marco Elver <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/lkml/[email protected]/ Signed-off-by: Mirsad Goran Todorovac <[email protected]> Acked-by: Marco Elver <[email protected]> Fixes: 1da177e ("Linux-2.6.12-rc2") Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
1054009064
pushed a commit
to 1054009064/linux
that referenced
this pull request
Nov 8, 2023
…>opts1 [ Upstream commit f97eee4 ] KCSAN reported the following data-race bug: ================================================================== BUG: KCSAN: data-race in rtl8169_poll (drivers/net/ethernet/realtek/r8169_main.c:4430 drivers/net/ethernet/realtek/r8169_main.c:4583) r8169 race at unknown origin, with read to 0xffff888117e43510 of 4 bytes by interrupt on cpu 21: rtl8169_poll (drivers/net/ethernet/realtek/r8169_main.c:4430 drivers/net/ethernet/realtek/r8169_main.c:4583) r8169 __napi_poll (net/core/dev.c:6527) net_rx_action (net/core/dev.c:6596 net/core/dev.c:6727) __do_softirq (kernel/softirq.c:553) __irq_exit_rcu (kernel/softirq.c:427 kernel/softirq.c:632) irq_exit_rcu (kernel/softirq.c:647) sysvec_apic_timer_interrupt (arch/x86/kernel/apic/apic.c:1074 (discriminator 14)) asm_sysvec_apic_timer_interrupt (./arch/x86/include/asm/idtentry.h:645) cpuidle_enter_state (drivers/cpuidle/cpuidle.c:291) cpuidle_enter (drivers/cpuidle/cpuidle.c:390) call_cpuidle (kernel/sched/idle.c:135) do_idle (kernel/sched/idle.c:219 kernel/sched/idle.c:282) cpu_startup_entry (kernel/sched/idle.c:378 (discriminator 1)) start_secondary (arch/x86/kernel/smpboot.c:210 arch/x86/kernel/smpboot.c:294) secondary_startup_64_no_verify (arch/x86/kernel/head_64.S:433) value changed: 0x80003fff -> 0x3402805f Reported by Kernel Concurrency Sanitizer on: CPU: 21 PID: 0 Comm: swapper/21 Tainted: G L 6.6.0-rc2-kcsan-00143-gb5cbe7c00aa0 torvalds#41 Hardware name: ASRock X670E PG Lightning/X670E PG Lightning, BIOS 1.21 04/26/2023 ================================================================== drivers/net/ethernet/realtek/r8169_main.c: ========================================== 4429 → 4430 status = le32_to_cpu(desc->opts1); 4431 if (status & DescOwn) 4432 break; 4433 4434 /* This barrier is needed to keep us from reading 4435 * any other fields out of the Rx descriptor until 4436 * we know the status of DescOwn 4437 */ 4438 dma_rmb(); 4439 4440 if (unlikely(status & RxRES)) { 4441 if (net_ratelimit()) 4442 netdev_warn(dev, "Rx ERROR. status = %08x\n", Marco Elver explained that dma_rmb() doesn't prevent the compiler to tear up the access to desc->opts1 which can be written to concurrently. READ_ONCE() should prevent that from happening: 4429 → 4430 status = le32_to_cpu(READ_ONCE(desc->opts1)); 4431 if (status & DescOwn) 4432 break; 4433 As the consequence of this fix, this KCSAN warning was eliminated. Fixes: 6202806 ("r8169: drop member opts1_mask from struct rtl8169_private") Suggested-by: Marco Elver <[email protected]> Cc: Heiner Kallweit <[email protected]> Cc: [email protected] Cc: "David S. Miller" <[email protected]> Cc: Eric Dumazet <[email protected]> Cc: Jakub Kicinski <[email protected]> Cc: Paolo Abeni <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/lkml/[email protected]/ Signed-off-by: Mirsad Goran Todorovac <[email protected]> Acked-by: Marco Elver <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
1054009064
pushed a commit
to 1054009064/linux
that referenced
this pull request
Nov 8, 2023
…>cur_tx [ Upstream commit c1c0ce3 ] KCSAN reported the following data-race: ================================================================== BUG: KCSAN: data-race in rtl8169_poll [r8169] / rtl8169_start_xmit [r8169] write (marked) to 0xffff888102474b74 of 4 bytes by task 5358 on cpu 29: rtl8169_start_xmit (drivers/net/ethernet/realtek/r8169_main.c:4254) r8169 dev_hard_start_xmit (./include/linux/netdevice.h:4889 ./include/linux/netdevice.h:4903 net/core/dev.c:3544 net/core/dev.c:3560) sch_direct_xmit (net/sched/sch_generic.c:342) __dev_queue_xmit (net/core/dev.c:3817 net/core/dev.c:4306) ip_finish_output2 (./include/linux/netdevice.h:3082 ./include/net/neighbour.h:526 ./include/net/neighbour.h:540 net/ipv4/ip_output.c:233) __ip_finish_output (net/ipv4/ip_output.c:311 net/ipv4/ip_output.c:293) ip_finish_output (net/ipv4/ip_output.c:328) ip_output (net/ipv4/ip_output.c:435) ip_send_skb (./include/net/dst.h:458 net/ipv4/ip_output.c:127 net/ipv4/ip_output.c:1486) udp_send_skb (net/ipv4/udp.c:963) udp_sendmsg (net/ipv4/udp.c:1246) inet_sendmsg (net/ipv4/af_inet.c:840 (discriminator 4)) sock_sendmsg (net/socket.c:730 net/socket.c:753) __sys_sendto (net/socket.c:2177) __x64_sys_sendto (net/socket.c:2185) do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120) read to 0xffff888102474b74 of 4 bytes by interrupt on cpu 21: rtl8169_poll (drivers/net/ethernet/realtek/r8169_main.c:4397 drivers/net/ethernet/realtek/r8169_main.c:4581) r8169 __napi_poll (net/core/dev.c:6527) net_rx_action (net/core/dev.c:6596 net/core/dev.c:6727) __do_softirq (kernel/softirq.c:553) __irq_exit_rcu (kernel/softirq.c:427 kernel/softirq.c:632) irq_exit_rcu (kernel/softirq.c:647) common_interrupt (arch/x86/kernel/irq.c:247 (discriminator 14)) asm_common_interrupt (./arch/x86/include/asm/idtentry.h:636) cpuidle_enter_state (drivers/cpuidle/cpuidle.c:291) cpuidle_enter (drivers/cpuidle/cpuidle.c:390) call_cpuidle (kernel/sched/idle.c:135) do_idle (kernel/sched/idle.c:219 kernel/sched/idle.c:282) cpu_startup_entry (kernel/sched/idle.c:378 (discriminator 1)) start_secondary (arch/x86/kernel/smpboot.c:210 arch/x86/kernel/smpboot.c:294) secondary_startup_64_no_verify (arch/x86/kernel/head_64.S:433) value changed: 0x002f4815 -> 0x002f4816 Reported by Kernel Concurrency Sanitizer on: CPU: 21 PID: 0 Comm: swapper/21 Tainted: G L 6.6.0-rc2-kcsan-00143-gb5cbe7c00aa0 torvalds#41 Hardware name: ASRock X670E PG Lightning/X670E PG Lightning, BIOS 1.21 04/26/2023 ================================================================== The write side of drivers/net/ethernet/realtek/r8169_main.c is: ================== 4251 /* rtl_tx needs to see descriptor changes before updated tp->cur_tx */ 4252 smp_wmb(); 4253 → 4254 WRITE_ONCE(tp->cur_tx, tp->cur_tx + frags + 1); 4255 4256 stop_queue = !netif_subqueue_maybe_stop(dev, 0, rtl_tx_slots_avail(tp), 4257 R8169_TX_STOP_THRS, 4258 R8169_TX_START_THRS); The read side is the function rtl_tx(): 4355 static void rtl_tx(struct net_device *dev, struct rtl8169_private *tp, 4356 int budget) 4357 { 4358 unsigned int dirty_tx, bytes_compl = 0, pkts_compl = 0; 4359 struct sk_buff *skb; 4360 4361 dirty_tx = tp->dirty_tx; 4362 4363 while (READ_ONCE(tp->cur_tx) != dirty_tx) { 4364 unsigned int entry = dirty_tx % NUM_TX_DESC; 4365 u32 status; 4366 4367 status = le32_to_cpu(tp->TxDescArray[entry].opts1); 4368 if (status & DescOwn) 4369 break; 4370 4371 skb = tp->tx_skb[entry].skb; 4372 rtl8169_unmap_tx_skb(tp, entry); 4373 4374 if (skb) { 4375 pkts_compl++; 4376 bytes_compl += skb->len; 4377 napi_consume_skb(skb, budget); 4378 } 4379 dirty_tx++; 4380 } 4381 4382 if (tp->dirty_tx != dirty_tx) { 4383 dev_sw_netstats_tx_add(dev, pkts_compl, bytes_compl); 4384 WRITE_ONCE(tp->dirty_tx, dirty_tx); 4385 4386 netif_subqueue_completed_wake(dev, 0, pkts_compl, bytes_compl, 4387 rtl_tx_slots_avail(tp), 4388 R8169_TX_START_THRS); 4389 /* 4390 * 8168 hack: TxPoll requests are lost when the Tx packets are 4391 * too close. Let's kick an extra TxPoll request when a burst 4392 * of start_xmit activity is detected (if it is not detected, 4393 * it is slow enough). -- FR 4394 * If skb is NULL then we come here again once a tx irq is 4395 * triggered after the last fragment is marked transmitted. 4396 */ → 4397 if (tp->cur_tx != dirty_tx && skb) 4398 rtl8169_doorbell(tp); 4399 } 4400 } Obviously from the code, an earlier detected data-race for tp->cur_tx was fixed in the line 4363: 4363 while (READ_ONCE(tp->cur_tx) != dirty_tx) { but the same solution is required for protecting the other access to tp->cur_tx: → 4397 if (READ_ONCE(tp->cur_tx) != dirty_tx && skb) 4398 rtl8169_doorbell(tp); The write in the line 4254 is protected with WRITE_ONCE(), but the read in the line 4397 might have suffered read tearing under some compiler optimisations. The fix eliminated the KCSAN data-race report for this bug. It is yet to be evaluated what happens if tp->cur_tx changes between the test in line 4363 and line 4397. This test should certainly not be cached by the compiler in some register for such a long time, while asynchronous writes to tp->cur_tx might have occurred in line 4254 in the meantime. Fixes: 94d8a98 ("r8169: reduce number of workaround doorbell rings") Cc: Heiner Kallweit <[email protected]> Cc: [email protected] Cc: "David S. Miller" <[email protected]> Cc: Eric Dumazet <[email protected]> Cc: Jakub Kicinski <[email protected]> Cc: Paolo Abeni <[email protected]> Cc: Marco Elver <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/lkml/[email protected]/ Signed-off-by: Mirsad Goran Todorovac <[email protected]> Acked-by: Marco Elver <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
1054009064
pushed a commit
to 1054009064/linux
that referenced
this pull request
Nov 8, 2023
…cArray[entry].opts1 [ Upstream commit dcf75a0 ] KCSAN reported the following data-race: ================================================================== BUG: KCSAN: data-race in rtl8169_poll (drivers/net/ethernet/realtek/r8169_main.c:4368 drivers/net/ethernet/realtek/r8169_main.c:4581) r8169 race at unknown origin, with read to 0xffff888140d37570 of 4 bytes by interrupt on cpu 21: rtl8169_poll (drivers/net/ethernet/realtek/r8169_main.c:4368 drivers/net/ethernet/realtek/r8169_main.c:4581) r8169 __napi_poll (net/core/dev.c:6527) net_rx_action (net/core/dev.c:6596 net/core/dev.c:6727) __do_softirq (kernel/softirq.c:553) __irq_exit_rcu (kernel/softirq.c:427 kernel/softirq.c:632) irq_exit_rcu (kernel/softirq.c:647) sysvec_apic_timer_interrupt (arch/x86/kernel/apic/apic.c:1074 (discriminator 14)) asm_sysvec_apic_timer_interrupt (./arch/x86/include/asm/idtentry.h:645) cpuidle_enter_state (drivers/cpuidle/cpuidle.c:291) cpuidle_enter (drivers/cpuidle/cpuidle.c:390) call_cpuidle (kernel/sched/idle.c:135) do_idle (kernel/sched/idle.c:219 kernel/sched/idle.c:282) cpu_startup_entry (kernel/sched/idle.c:378 (discriminator 1)) start_secondary (arch/x86/kernel/smpboot.c:210 arch/x86/kernel/smpboot.c:294) secondary_startup_64_no_verify (arch/x86/kernel/head_64.S:433) value changed: 0xb0000042 -> 0x00000000 Reported by Kernel Concurrency Sanitizer on: CPU: 21 PID: 0 Comm: swapper/21 Tainted: G L 6.6.0-rc2-kcsan-00143-gb5cbe7c00aa0 torvalds#41 Hardware name: ASRock X670E PG Lightning/X670E PG Lightning, BIOS 1.21 04/26/2023 ================================================================== The read side is in drivers/net/ethernet/realtek/r8169_main.c ========================================= 4355 static void rtl_tx(struct net_device *dev, struct rtl8169_private *tp, 4356 int budget) 4357 { 4358 unsigned int dirty_tx, bytes_compl = 0, pkts_compl = 0; 4359 struct sk_buff *skb; 4360 4361 dirty_tx = tp->dirty_tx; 4362 4363 while (READ_ONCE(tp->cur_tx) != dirty_tx) { 4364 unsigned int entry = dirty_tx % NUM_TX_DESC; 4365 u32 status; 4366 → 4367 status = le32_to_cpu(tp->TxDescArray[entry].opts1); 4368 if (status & DescOwn) 4369 break; 4370 4371 skb = tp->tx_skb[entry].skb; 4372 rtl8169_unmap_tx_skb(tp, entry); 4373 4374 if (skb) { 4375 pkts_compl++; 4376 bytes_compl += skb->len; 4377 napi_consume_skb(skb, budget); 4378 } 4379 dirty_tx++; 4380 } 4381 4382 if (tp->dirty_tx != dirty_tx) { 4383 dev_sw_netstats_tx_add(dev, pkts_compl, bytes_compl); 4384 WRITE_ONCE(tp->dirty_tx, dirty_tx); 4385 4386 netif_subqueue_completed_wake(dev, 0, pkts_compl, bytes_compl, 4387 rtl_tx_slots_avail(tp), 4388 R8169_TX_START_THRS); 4389 /* 4390 * 8168 hack: TxPoll requests are lost when the Tx packets are 4391 * too close. Let's kick an extra TxPoll request when a burst 4392 * of start_xmit activity is detected (if it is not detected, 4393 * it is slow enough). -- FR 4394 * If skb is NULL then we come here again once a tx irq is 4395 * triggered after the last fragment is marked transmitted. 4396 */ 4397 if (READ_ONCE(tp->cur_tx) != dirty_tx && skb) 4398 rtl8169_doorbell(tp); 4399 } 4400 } tp->TxDescArray[entry].opts1 is reported to have a data-race and READ_ONCE() fixes this KCSAN warning. 4366 → 4367 status = le32_to_cpu(READ_ONCE(tp->TxDescArray[entry].opts1)); 4368 if (status & DescOwn) 4369 break; 4370 Cc: Heiner Kallweit <[email protected]> Cc: [email protected] Cc: "David S. Miller" <[email protected]> Cc: Eric Dumazet <[email protected]> Cc: Jakub Kicinski <[email protected]> Cc: Paolo Abeni <[email protected]> Cc: Marco Elver <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/lkml/[email protected]/ Signed-off-by: Mirsad Goran Todorovac <[email protected]> Acked-by: Marco Elver <[email protected]> Fixes: 1da177e ("Linux-2.6.12-rc2") Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
1054009064
pushed a commit
to 1054009064/linux
that referenced
this pull request
Nov 8, 2023
…>opts1 [ Upstream commit f97eee4 ] KCSAN reported the following data-race bug: ================================================================== BUG: KCSAN: data-race in rtl8169_poll (drivers/net/ethernet/realtek/r8169_main.c:4430 drivers/net/ethernet/realtek/r8169_main.c:4583) r8169 race at unknown origin, with read to 0xffff888117e43510 of 4 bytes by interrupt on cpu 21: rtl8169_poll (drivers/net/ethernet/realtek/r8169_main.c:4430 drivers/net/ethernet/realtek/r8169_main.c:4583) r8169 __napi_poll (net/core/dev.c:6527) net_rx_action (net/core/dev.c:6596 net/core/dev.c:6727) __do_softirq (kernel/softirq.c:553) __irq_exit_rcu (kernel/softirq.c:427 kernel/softirq.c:632) irq_exit_rcu (kernel/softirq.c:647) sysvec_apic_timer_interrupt (arch/x86/kernel/apic/apic.c:1074 (discriminator 14)) asm_sysvec_apic_timer_interrupt (./arch/x86/include/asm/idtentry.h:645) cpuidle_enter_state (drivers/cpuidle/cpuidle.c:291) cpuidle_enter (drivers/cpuidle/cpuidle.c:390) call_cpuidle (kernel/sched/idle.c:135) do_idle (kernel/sched/idle.c:219 kernel/sched/idle.c:282) cpu_startup_entry (kernel/sched/idle.c:378 (discriminator 1)) start_secondary (arch/x86/kernel/smpboot.c:210 arch/x86/kernel/smpboot.c:294) secondary_startup_64_no_verify (arch/x86/kernel/head_64.S:433) value changed: 0x80003fff -> 0x3402805f Reported by Kernel Concurrency Sanitizer on: CPU: 21 PID: 0 Comm: swapper/21 Tainted: G L 6.6.0-rc2-kcsan-00143-gb5cbe7c00aa0 torvalds#41 Hardware name: ASRock X670E PG Lightning/X670E PG Lightning, BIOS 1.21 04/26/2023 ================================================================== drivers/net/ethernet/realtek/r8169_main.c: ========================================== 4429 → 4430 status = le32_to_cpu(desc->opts1); 4431 if (status & DescOwn) 4432 break; 4433 4434 /* This barrier is needed to keep us from reading 4435 * any other fields out of the Rx descriptor until 4436 * we know the status of DescOwn 4437 */ 4438 dma_rmb(); 4439 4440 if (unlikely(status & RxRES)) { 4441 if (net_ratelimit()) 4442 netdev_warn(dev, "Rx ERROR. status = %08x\n", Marco Elver explained that dma_rmb() doesn't prevent the compiler to tear up the access to desc->opts1 which can be written to concurrently. READ_ONCE() should prevent that from happening: 4429 → 4430 status = le32_to_cpu(READ_ONCE(desc->opts1)); 4431 if (status & DescOwn) 4432 break; 4433 As the consequence of this fix, this KCSAN warning was eliminated. Fixes: 6202806 ("r8169: drop member opts1_mask from struct rtl8169_private") Suggested-by: Marco Elver <[email protected]> Cc: Heiner Kallweit <[email protected]> Cc: [email protected] Cc: "David S. Miller" <[email protected]> Cc: Eric Dumazet <[email protected]> Cc: Jakub Kicinski <[email protected]> Cc: Paolo Abeni <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/lkml/[email protected]/ Signed-off-by: Mirsad Goran Todorovac <[email protected]> Acked-by: Marco Elver <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
logic10492
pushed a commit
to logic10492/linux-amd-zen2
that referenced
this pull request
Jan 18, 2024
scx: Rename "type" -> "exit_type"
gyroninja
added a commit
to gyroninja/linux
that referenced
this pull request
Jan 28, 2024
KSAN calls into rcu code which then triggers a write that reenters into KSAN getting the system stuck doing infinite recursion. #0 kmsan_get_context () at mm/kmsan/kmsan.h:106 #1 __msan_get_context_state () at mm/kmsan/instrumentation.c:331 #2 0xffffffff81495671 in get_current () at ./arch/x86/include/asm/current.h:42 #3 rcu_preempt_read_enter () at kernel/rcu/tree_plugin.h:379 #4 __rcu_read_lock () at kernel/rcu/tree_plugin.h:402 #5 0xffffffff81b2054b in rcu_read_lock () at ./include/linux/rcupdate.h:748 torvalds#6 pfn_valid (pfn=<optimized out>) at ./include/linux/mmzone.h:2016 torvalds#7 kmsan_virt_addr_valid (addr=addr@entry=0xffffffff8620d974 <init_task+1012>) at ./arch/x86/include/asm/kmsan.h:82 torvalds#8 virt_to_page_or_null (vaddr=vaddr@entry=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/shadow.c:75 torvalds#9 0xffffffff81b2023c in kmsan_get_metadata (address=0xffffffff8620d974 <init_task+1012>, is_origin=false) at mm/kmsan/shadow.c:143 torvalds#10 kmsan_get_shadow_origin_ptr (address=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/shadow.c:97 torvalds#11 0xffffffff81b1dbd2 in get_shadow_origin_ptr (addr=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/instrumentation.c:36 torvalds#12 __msan_metadata_ptr_for_load_4 (addr=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/instrumentation.c:91 torvalds#13 0xffffffff8149568f in rcu_preempt_read_enter () at kernel/rcu/tree_plugin.h:379 torvalds#14 __rcu_read_lock () at kernel/rcu/tree_plugin.h:402 torvalds#15 0xffffffff81b2054b in rcu_read_lock () at ./include/linux/rcupdate.h:748 torvalds#16 pfn_valid (pfn=<optimized out>) at ./include/linux/mmzone.h:2016 torvalds#17 kmsan_virt_addr_valid (addr=addr@entry=0xffffffff8620d974 <init_task+1012>) at ./arch/x86/include/asm/kmsan.h:82 torvalds#18 virt_to_page_or_null (vaddr=vaddr@entry=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/shadow.c:75 torvalds#19 0xffffffff81b2023c in kmsan_get_metadata (address=0xffffffff8620d974 <init_task+1012>, is_origin=false) at mm/kmsan/shadow.c:143 torvalds#20 kmsan_get_shadow_origin_ptr (address=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/shadow.c:97 torvalds#21 0xffffffff81b1dbd2 in get_shadow_origin_ptr (addr=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/instrumentation.c:36 torvalds#22 __msan_metadata_ptr_for_load_4 (addr=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/instrumentation.c:91 torvalds#23 0xffffffff8149568f in rcu_preempt_read_enter () at kernel/rcu/tree_plugin.h:379 torvalds#24 __rcu_read_lock () at kernel/rcu/tree_plugin.h:402 torvalds#25 0xffffffff81b2054b in rcu_read_lock () at ./include/linux/rcupdate.h:748 torvalds#26 pfn_valid (pfn=<optimized out>) at ./include/linux/mmzone.h:2016 torvalds#27 kmsan_virt_addr_valid (addr=addr@entry=0xffffffff8620d974 <init_task+1012>) at ./arch/x86/include/asm/kmsan.h:82 torvalds#28 virt_to_page_or_null (vaddr=vaddr@entry=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/shadow.c:75 torvalds#29 0xffffffff81b2023c in kmsan_get_metadata (address=0xffffffff8620d974 <init_task+1012>, is_origin=false) at mm/kmsan/shadow.c:143 torvalds#30 kmsan_get_shadow_origin_ptr (address=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/shadow.c:97 torvalds#31 0xffffffff81b1dbd2 in get_shadow_origin_ptr (addr=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/instrumentation.c:36 torvalds#32 __msan_metadata_ptr_for_load_4 (addr=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/instrumentation.c:91 torvalds#33 0xffffffff8149568f in rcu_preempt_read_enter () at kernel/rcu/tree_plugin.h:379 torvalds#34 __rcu_read_lock () at kernel/rcu/tree_plugin.h:402 torvalds#35 0xffffffff81b2054b in rcu_read_lock () at ./include/linux/rcupdate.h:748 torvalds#36 pfn_valid (pfn=<optimized out>) at ./include/linux/mmzone.h:2016 torvalds#37 kmsan_virt_addr_valid (addr=addr@entry=0xffffffff8620d974 <init_task+1012>) at ./arch/x86/include/asm/kmsan.h:82 torvalds#38 virt_to_page_or_null (vaddr=vaddr@entry=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/shadow.c:75 torvalds#39 0xffffffff81b2023c in kmsan_get_metadata (address=0xffffffff8620d974 <init_task+1012>, is_origin=false) at mm/kmsan/shadow.c:143 torvalds#40 kmsan_get_shadow_origin_ptr (address=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/shadow.c:97 torvalds#41 0xffffffff81b1dbd2 in get_shadow_origin_ptr (addr=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/instrumentation.c:36 torvalds#42 __msan_metadata_ptr_for_load_4 (addr=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/instrumentation.c:91 torvalds#43 0xffffffff8149568f in rcu_preempt_read_enter () at kernel/rcu/tree_plugin.h:379 torvalds#44 __rcu_read_lock () at kernel/rcu/tree_plugin.h:402 torvalds#45 0xffffffff81b2054b in rcu_read_lock () at ./include/linux/rcupdate.h:748 torvalds#46 pfn_valid (pfn=<optimized out>) at ./include/linux/mmzone.h:2016 torvalds#47 kmsan_virt_addr_valid (addr=addr@entry=0xffffffff8620d974 <init_task+1012>) at ./arch/x86/include/asm/kmsan.h:82 torvalds#48 virt_to_page_or_null (vaddr=vaddr@entry=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/shadow.c:75 torvalds#49 0xffffffff81b2023c in kmsan_get_metadata (address=0xffffffff8620d974 <init_task+1012>, is_origin=false) at mm/kmsan/shadow.c:143 torvalds#50 kmsan_get_shadow_origin_ptr (address=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/shadow.c:97 torvalds#51 0xffffffff81b1dbd2 in get_shadow_origin_ptr (addr=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/instrumentation.c:36 #52 __msan_metadata_ptr_for_load_4 (addr=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/instrumentation.c:91 #53 0xffffffff8149568f in rcu_preempt_read_enter () at kernel/rcu/tree_plugin.h:379 torvalds#54 __rcu_read_lock () at kernel/rcu/tree_plugin.h:402 torvalds#55 0xffffffff81b2054b in rcu_read_lock () at ./include/linux/rcupdate.h:748 torvalds#56 pfn_valid (pfn=<optimized out>) at ./include/linux/mmzone.h:2016 torvalds#57 kmsan_virt_addr_valid (addr=addr@entry=0xffffffff8620d974 <init_task+1012>) at ./arch/x86/include/asm/kmsan.h:82 #58 virt_to_page_or_null (vaddr=vaddr@entry=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/shadow.c:75 torvalds#59 0xffffffff81b2023c in kmsan_get_metadata (address=0xffffffff8620d974 <init_task+1012>, is_origin=false) at mm/kmsan/shadow.c:143 torvalds#60 kmsan_get_shadow_origin_ptr (address=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/shadow.c:97 torvalds#61 0xffffffff81b1dbd2 in get_shadow_origin_ptr (addr=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/instrumentation.c:36 torvalds#62 __msan_metadata_ptr_for_load_4 (addr=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/instrumentation.c:91 torvalds#63 0xffffffff8149568f in rcu_preempt_read_enter () at kernel/rcu/tree_plugin.h:379 torvalds#64 __rcu_read_lock () at kernel/rcu/tree_plugin.h:402 torvalds#65 0xffffffff81b2054b in rcu_read_lock () at ./include/linux/rcupdate.h:748 torvalds#66 pfn_valid (pfn=<optimized out>) at ./include/linux/mmzone.h:2016 torvalds#67 kmsan_virt_addr_valid (addr=addr@entry=0xffffffff8620d974 <init_task+1012>) at ./arch/x86/include/asm/kmsan.h:82 torvalds#68 virt_to_page_or_null (vaddr=vaddr@entry=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/shadow.c:75 torvalds#69 0xffffffff81b2023c in kmsan_get_metadata (address=0xffffffff8620d974 <init_task+1012>, is_origin=false) at mm/kmsan/shadow.c:143 #70 kmsan_get_shadow_origin_ptr (address=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/shadow.c:97 torvalds#71 0xffffffff81b1dbd2 in get_shadow_origin_ptr (addr=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/instrumentation.c:36 torvalds#72 __msan_metadata_ptr_for_load_4 (addr=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/instrumentation.c:91 torvalds#73 0xffffffff8149568f in rcu_preempt_read_enter () at kernel/rcu/tree_plugin.h:379 torvalds#74 __rcu_read_lock () at kernel/rcu/tree_plugin.h:402 torvalds#75 0xffffffff81b2054b in rcu_read_lock () at ./include/linux/rcupdate.h:748 torvalds#76 pfn_valid (pfn=<optimized out>) at ./include/linux/mmzone.h:2016 torvalds#77 kmsan_virt_addr_valid (addr=addr@entry=0xffffffff86203c90) at ./arch/x86/include/asm/kmsan.h:82 torvalds#78 virt_to_page_or_null (vaddr=vaddr@entry=0xffffffff86203c90) at mm/kmsan/shadow.c:75 torvalds#79 0xffffffff81b2023c in kmsan_get_metadata (address=0xffffffff86203c90, is_origin=false) at mm/kmsan/shadow.c:143 torvalds#80 kmsan_get_shadow_origin_ptr (address=0xffffffff86203c90, size=8, store=false) at mm/kmsan/shadow.c:97 torvalds#81 0xffffffff81b1dc72 in get_shadow_origin_ptr (addr=0xffffffff8620d974 <init_task+1012>, size=8, store=false) at mm/kmsan/instrumentation.c:36 torvalds#82 __msan_metadata_ptr_for_load_8 (addr=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/instrumentation.c:92 torvalds#83 0xffffffff814fdb9e in filter_irq_stacks (entries=<optimized out>, nr_entries=4) at kernel/stacktrace.c:397 torvalds#84 0xffffffff829520e8 in stack_depot_save_flags (entries=0xffffffff8620d974 <init_task+1012>, nr_entries=4, alloc_flags=0, depot_flags=0) at lib/stackdepot.c:500 torvalds#85 0xffffffff81b1e560 in __msan_poison_alloca (address=0xffffffff86203da0, size=24, descr=<optimized out>) at mm/kmsan/instrumentation.c:285 torvalds#86 0xffffffff8562821c in _printk (fmt=0xffffffff85f191a5 "\0016Attempting lock1") at kernel/printk/printk.c:2324 torvalds#87 0xffffffff81942aa2 in kmem_cache_create_usercopy (name=0xffffffff85f18903 "mm_struct", size=1296, align=0, flags=270336, useroffset=<optimized out>, usersize=<optimized out>, ctor=0x0 <fixed_percpu_data>) at mm/slab_common.c:296 torvalds#88 0xffffffff86f337a0 in mm_cache_init () at kernel/fork.c:3262 torvalds#89 0xffffffff86eacb8e in start_kernel () at init/main.c:932 torvalds#90 0xffffffff86ecdf94 in x86_64_start_reservations (real_mode_data=0x140e0 <exception_stacks+28896> <error: Cannot access memory at address 0x140e0>) at arch/x86/kernel/head64.c:555 torvalds#91 0xffffffff86ecde9b in x86_64_start_kernel (real_mode_data=0x140e0 <exception_stacks+28896> <error: Cannot access memory at address 0x140e0>) at arch/x86/kernel/head64.c:536 torvalds#92 0xffffffff810001d3 in secondary_startup_64 () at /pool/workspace/linux/arch/x86/kernel/head_64.S:461 torvalds#93 0x0000000000000000 in ??
gyroninja
added a commit
to gyroninja/linux
that referenced
this pull request
Jan 28, 2024
As of 5ec8e8e(mm/sparsemem: fix race in accessing memory_section->usage) KMSAN now calls into RCU tree code during kmsan_get_metadata. This will trigger a write that will reenter into KMSAN getting the system stuck doing infinite recursion. #0 kmsan_get_context () at mm/kmsan/kmsan.h:106 #1 __msan_get_context_state () at mm/kmsan/instrumentation.c:331 #2 0xffffffff81495671 in get_current () at ./arch/x86/include/asm/current.h:42 #3 rcu_preempt_read_enter () at kernel/rcu/tree_plugin.h:379 #4 __rcu_read_lock () at kernel/rcu/tree_plugin.h:402 #5 0xffffffff81b2054b in rcu_read_lock () at ./include/linux/rcupdate.h:748 torvalds#6 pfn_valid (pfn=<optimized out>) at ./include/linux/mmzone.h:2016 torvalds#7 kmsan_virt_addr_valid (addr=addr@entry=0xffffffff8620d974 <init_task+1012>) at ./arch/x86/include/asm/kmsan.h:82 torvalds#8 virt_to_page_or_null (vaddr=vaddr@entry=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/shadow.c:75 torvalds#9 0xffffffff81b2023c in kmsan_get_metadata (address=0xffffffff8620d974 <init_task+1012>, is_origin=false) at mm/kmsan/shadow.c:143 torvalds#10 kmsan_get_shadow_origin_ptr (address=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/shadow.c:97 torvalds#11 0xffffffff81b1dbd2 in get_shadow_origin_ptr (addr=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/instrumentation.c:36 torvalds#12 __msan_metadata_ptr_for_load_4 (addr=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/instrumentation.c:91 torvalds#13 0xffffffff8149568f in rcu_preempt_read_enter () at kernel/rcu/tree_plugin.h:379 torvalds#14 __rcu_read_lock () at kernel/rcu/tree_plugin.h:402 torvalds#15 0xffffffff81b2054b in rcu_read_lock () at ./include/linux/rcupdate.h:748 torvalds#16 pfn_valid (pfn=<optimized out>) at ./include/linux/mmzone.h:2016 torvalds#17 kmsan_virt_addr_valid (addr=addr@entry=0xffffffff8620d974 <init_task+1012>) at ./arch/x86/include/asm/kmsan.h:82 torvalds#18 virt_to_page_or_null (vaddr=vaddr@entry=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/shadow.c:75 torvalds#19 0xffffffff81b2023c in kmsan_get_metadata (address=0xffffffff8620d974 <init_task+1012>, is_origin=false) at mm/kmsan/shadow.c:143 torvalds#20 kmsan_get_shadow_origin_ptr (address=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/shadow.c:97 torvalds#21 0xffffffff81b1dbd2 in get_shadow_origin_ptr (addr=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/instrumentation.c:36 torvalds#22 __msan_metadata_ptr_for_load_4 (addr=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/instrumentation.c:91 torvalds#23 0xffffffff8149568f in rcu_preempt_read_enter () at kernel/rcu/tree_plugin.h:379 torvalds#24 __rcu_read_lock () at kernel/rcu/tree_plugin.h:402 torvalds#25 0xffffffff81b2054b in rcu_read_lock () at ./include/linux/rcupdate.h:748 torvalds#26 pfn_valid (pfn=<optimized out>) at ./include/linux/mmzone.h:2016 torvalds#27 kmsan_virt_addr_valid (addr=addr@entry=0xffffffff8620d974 <init_task+1012>) at ./arch/x86/include/asm/kmsan.h:82 torvalds#28 virt_to_page_or_null (vaddr=vaddr@entry=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/shadow.c:75 torvalds#29 0xffffffff81b2023c in kmsan_get_metadata (address=0xffffffff8620d974 <init_task+1012>, is_origin=false) at mm/kmsan/shadow.c:143 torvalds#30 kmsan_get_shadow_origin_ptr (address=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/shadow.c:97 torvalds#31 0xffffffff81b1dbd2 in get_shadow_origin_ptr (addr=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/instrumentation.c:36 torvalds#32 __msan_metadata_ptr_for_load_4 (addr=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/instrumentation.c:91 torvalds#33 0xffffffff8149568f in rcu_preempt_read_enter () at kernel/rcu/tree_plugin.h:379 torvalds#34 __rcu_read_lock () at kernel/rcu/tree_plugin.h:402 torvalds#35 0xffffffff81b2054b in rcu_read_lock () at ./include/linux/rcupdate.h:748 torvalds#36 pfn_valid (pfn=<optimized out>) at ./include/linux/mmzone.h:2016 torvalds#37 kmsan_virt_addr_valid (addr=addr@entry=0xffffffff8620d974 <init_task+1012>) at ./arch/x86/include/asm/kmsan.h:82 torvalds#38 virt_to_page_or_null (vaddr=vaddr@entry=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/shadow.c:75 torvalds#39 0xffffffff81b2023c in kmsan_get_metadata (address=0xffffffff8620d974 <init_task+1012>, is_origin=false) at mm/kmsan/shadow.c:143 torvalds#40 kmsan_get_shadow_origin_ptr (address=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/shadow.c:97 torvalds#41 0xffffffff81b1dbd2 in get_shadow_origin_ptr (addr=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/instrumentation.c:36 torvalds#42 __msan_metadata_ptr_for_load_4 (addr=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/instrumentation.c:91 torvalds#43 0xffffffff8149568f in rcu_preempt_read_enter () at kernel/rcu/tree_plugin.h:379 torvalds#44 __rcu_read_lock () at kernel/rcu/tree_plugin.h:402 torvalds#45 0xffffffff81b2054b in rcu_read_lock () at ./include/linux/rcupdate.h:748 torvalds#46 pfn_valid (pfn=<optimized out>) at ./include/linux/mmzone.h:2016 torvalds#47 kmsan_virt_addr_valid (addr=addr@entry=0xffffffff8620d974 <init_task+1012>) at ./arch/x86/include/asm/kmsan.h:82 torvalds#48 virt_to_page_or_null (vaddr=vaddr@entry=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/shadow.c:75 torvalds#49 0xffffffff81b2023c in kmsan_get_metadata (address=0xffffffff8620d974 <init_task+1012>, is_origin=false) at mm/kmsan/shadow.c:143 torvalds#50 kmsan_get_shadow_origin_ptr (address=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/shadow.c:97 torvalds#51 0xffffffff81b1dbd2 in get_shadow_origin_ptr (addr=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/instrumentation.c:36 #52 __msan_metadata_ptr_for_load_4 (addr=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/instrumentation.c:91 #53 0xffffffff8149568f in rcu_preempt_read_enter () at kernel/rcu/tree_plugin.h:379 torvalds#54 __rcu_read_lock () at kernel/rcu/tree_plugin.h:402 torvalds#55 0xffffffff81b2054b in rcu_read_lock () at ./include/linux/rcupdate.h:748 torvalds#56 pfn_valid (pfn=<optimized out>) at ./include/linux/mmzone.h:2016 torvalds#57 kmsan_virt_addr_valid (addr=addr@entry=0xffffffff8620d974 <init_task+1012>) at ./arch/x86/include/asm/kmsan.h:82 #58 virt_to_page_or_null (vaddr=vaddr@entry=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/shadow.c:75 torvalds#59 0xffffffff81b2023c in kmsan_get_metadata (address=0xffffffff8620d974 <init_task+1012>, is_origin=false) at mm/kmsan/shadow.c:143 torvalds#60 kmsan_get_shadow_origin_ptr (address=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/shadow.c:97 torvalds#61 0xffffffff81b1dbd2 in get_shadow_origin_ptr (addr=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/instrumentation.c:36 torvalds#62 __msan_metadata_ptr_for_load_4 (addr=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/instrumentation.c:91 torvalds#63 0xffffffff8149568f in rcu_preempt_read_enter () at kernel/rcu/tree_plugin.h:379 torvalds#64 __rcu_read_lock () at kernel/rcu/tree_plugin.h:402 torvalds#65 0xffffffff81b2054b in rcu_read_lock () at ./include/linux/rcupdate.h:748 torvalds#66 pfn_valid (pfn=<optimized out>) at ./include/linux/mmzone.h:2016 torvalds#67 kmsan_virt_addr_valid (addr=addr@entry=0xffffffff8620d974 <init_task+1012>) at ./arch/x86/include/asm/kmsan.h:82 torvalds#68 virt_to_page_or_null (vaddr=vaddr@entry=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/shadow.c:75 torvalds#69 0xffffffff81b2023c in kmsan_get_metadata (address=0xffffffff8620d974 <init_task+1012>, is_origin=false) at mm/kmsan/shadow.c:143 #70 kmsan_get_shadow_origin_ptr (address=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/shadow.c:97 torvalds#71 0xffffffff81b1dbd2 in get_shadow_origin_ptr (addr=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/instrumentation.c:36 torvalds#72 __msan_metadata_ptr_for_load_4 (addr=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/instrumentation.c:91 torvalds#73 0xffffffff8149568f in rcu_preempt_read_enter () at kernel/rcu/tree_plugin.h:379 torvalds#74 __rcu_read_lock () at kernel/rcu/tree_plugin.h:402 torvalds#75 0xffffffff81b2054b in rcu_read_lock () at ./include/linux/rcupdate.h:748 torvalds#76 pfn_valid (pfn=<optimized out>) at ./include/linux/mmzone.h:2016 torvalds#77 kmsan_virt_addr_valid (addr=addr@entry=0xffffffff86203c90) at ./arch/x86/include/asm/kmsan.h:82 torvalds#78 virt_to_page_or_null (vaddr=vaddr@entry=0xffffffff86203c90) at mm/kmsan/shadow.c:75 torvalds#79 0xffffffff81b2023c in kmsan_get_metadata (address=0xffffffff86203c90, is_origin=false) at mm/kmsan/shadow.c:143 torvalds#80 kmsan_get_shadow_origin_ptr (address=0xffffffff86203c90, size=8, store=false) at mm/kmsan/shadow.c:97 torvalds#81 0xffffffff81b1dc72 in get_shadow_origin_ptr (addr=0xffffffff8620d974 <init_task+1012>, size=8, store=false) at mm/kmsan/instrumentation.c:36 torvalds#82 __msan_metadata_ptr_for_load_8 (addr=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/instrumentation.c:92 torvalds#83 0xffffffff814fdb9e in filter_irq_stacks (entries=<optimized out>, nr_entries=4) at kernel/stacktrace.c:397 torvalds#84 0xffffffff829520e8 in stack_depot_save_flags (entries=0xffffffff8620d974 <init_task+1012>, nr_entries=4, alloc_flags=0, depot_flags=0) at lib/stackdepot.c:500 torvalds#85 0xffffffff81b1e560 in __msan_poison_alloca (address=0xffffffff86203da0, size=24, descr=<optimized out>) at mm/kmsan/instrumentation.c:285 torvalds#86 0xffffffff8562821c in _printk (fmt=0xffffffff85f191a5 "\0016Attempting lock1") at kernel/printk/printk.c:2324 torvalds#87 0xffffffff81942aa2 in kmem_cache_create_usercopy (name=0xffffffff85f18903 "mm_struct", size=1296, align=0, flags=270336, useroffset=<optimized out>, usersize=<optimized out>, ctor=0x0 <fixed_percpu_data>) at mm/slab_common.c:296 torvalds#88 0xffffffff86f337a0 in mm_cache_init () at kernel/fork.c:3262 torvalds#89 0xffffffff86eacb8e in start_kernel () at init/main.c:932 torvalds#90 0xffffffff86ecdf94 in x86_64_start_reservations (real_mode_data=0x140e0 <exception_stacks+28896> <error: Cannot access memory at address 0x140e0>) at arch/x86/kernel/head64.c:555 torvalds#91 0xffffffff86ecde9b in x86_64_start_kernel (real_mode_data=0x140e0 <exception_stacks+28896> <error: Cannot access memory at address 0x140e0>) at arch/x86/kernel/head64.c:536 torvalds#92 0xffffffff810001d3 in secondary_startup_64 () at /pool/workspace/linux/arch/x86/kernel/head_64.S:461 torvalds#93 0x0000000000000000 in ??
intel-lab-lkp
pushed a commit
to intel-lab-lkp/linux
that referenced
this pull request
Apr 30, 2024
The cgroup1_hierarchy test uses setup_classid_environment to setup
cgroupv1 environment. The problem is that the environment is set in
/sys/fs/cgroup and therefore, if not run under an own mount namespace,
effectively deletes all system cgroups:
$ ls /sys/fs/cgroup | wc -l
27
$ sudo ./test_progs -t cgroup1_hierarchy
torvalds#41/1 cgroup1_hierarchy/test_cgroup1_hierarchy:OK
torvalds#41/2 cgroup1_hierarchy/test_root_cgid:OK
torvalds#41/3 cgroup1_hierarchy/test_invalid_level:OK
torvalds#41/4 cgroup1_hierarchy/test_invalid_cgid:OK
torvalds#41/5 cgroup1_hierarchy/test_invalid_hid:OK
torvalds#41/6 cgroup1_hierarchy/test_invalid_cgrp_name:OK
torvalds#41/7 cgroup1_hierarchy/test_invalid_cgrp_name2:OK
torvalds#41/8 cgroup1_hierarchy/test_sleepable_prog:OK
torvalds#41 cgroup1_hierarchy:OK
Summary: 1/8 PASSED, 0 SKIPPED, 0 FAILED
$ ls /sys/fs/cgroup | wc -l
1
To avoid this, run setup_cgroup_environment first which will create an
own mount namespace. This only affects the cgroupv1_hierarchy test as
all other cgroup1 test progs already run setup_cgroup_environment prior
to running setup_classid_environment.
Also add a comment to the header of setup_classid_environment to warn
against this invalid usage in future.
Fixes: 3607692 ("selftests/bpf: Add selftests for cgroup1 hierarchy")
Signed-off-by: Viktor Malik <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Kaz205
pushed a commit
to Kaz205/linux
that referenced
this pull request
May 27, 2024
[ Upstream commit 19468ed ] The cgroup1_hierarchy test uses setup_classid_environment to setup cgroupv1 environment. The problem is that the environment is set in /sys/fs/cgroup and therefore, if not run under an own mount namespace, effectively deletes all system cgroups: $ ls /sys/fs/cgroup | wc -l 27 $ sudo ./test_progs -t cgroup1_hierarchy torvalds#41/1 cgroup1_hierarchy/test_cgroup1_hierarchy:OK torvalds#41/2 cgroup1_hierarchy/test_root_cgid:OK torvalds#41/3 cgroup1_hierarchy/test_invalid_level:OK torvalds#41/4 cgroup1_hierarchy/test_invalid_cgid:OK torvalds#41/5 cgroup1_hierarchy/test_invalid_hid:OK torvalds#41/6 cgroup1_hierarchy/test_invalid_cgrp_name:OK torvalds#41/7 cgroup1_hierarchy/test_invalid_cgrp_name2:OK torvalds#41/8 cgroup1_hierarchy/test_sleepable_prog:OK torvalds#41 cgroup1_hierarchy:OK Summary: 1/8 PASSED, 0 SKIPPED, 0 FAILED $ ls /sys/fs/cgroup | wc -l 1 To avoid this, run setup_cgroup_environment first which will create an own mount namespace. This only affects the cgroupv1_hierarchy test as all other cgroup1 test progs already run setup_cgroup_environment prior to running setup_classid_environment. Also add a comment to the header of setup_classid_environment to warn against this invalid usage in future. Fixes: 3607692 ("selftests/bpf: Add selftests for cgroup1 hierarchy") Signed-off-by: Viktor Malik <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected] Signed-off-by: Sasha Levin <[email protected]>
Kaz205
pushed a commit
to Kaz205/linux
that referenced
this pull request
May 29, 2024
[ Upstream commit 19468ed ] The cgroup1_hierarchy test uses setup_classid_environment to setup cgroupv1 environment. The problem is that the environment is set in /sys/fs/cgroup and therefore, if not run under an own mount namespace, effectively deletes all system cgroups: $ ls /sys/fs/cgroup | wc -l 27 $ sudo ./test_progs -t cgroup1_hierarchy torvalds#41/1 cgroup1_hierarchy/test_cgroup1_hierarchy:OK torvalds#41/2 cgroup1_hierarchy/test_root_cgid:OK torvalds#41/3 cgroup1_hierarchy/test_invalid_level:OK torvalds#41/4 cgroup1_hierarchy/test_invalid_cgid:OK torvalds#41/5 cgroup1_hierarchy/test_invalid_hid:OK torvalds#41/6 cgroup1_hierarchy/test_invalid_cgrp_name:OK torvalds#41/7 cgroup1_hierarchy/test_invalid_cgrp_name2:OK torvalds#41/8 cgroup1_hierarchy/test_sleepable_prog:OK torvalds#41 cgroup1_hierarchy:OK Summary: 1/8 PASSED, 0 SKIPPED, 0 FAILED $ ls /sys/fs/cgroup | wc -l 1 To avoid this, run setup_cgroup_environment first which will create an own mount namespace. This only affects the cgroupv1_hierarchy test as all other cgroup1 test progs already run setup_cgroup_environment prior to running setup_classid_environment. Also add a comment to the header of setup_classid_environment to warn against this invalid usage in future. Fixes: 3607692 ("selftests/bpf: Add selftests for cgroup1 hierarchy") Signed-off-by: Viktor Malik <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected] Signed-off-by: Sasha Levin <[email protected]>
ptr1337
pushed a commit
to CachyOS/linux
that referenced
this pull request
May 30, 2024
[ Upstream commit 19468ed ] The cgroup1_hierarchy test uses setup_classid_environment to setup cgroupv1 environment. The problem is that the environment is set in /sys/fs/cgroup and therefore, if not run under an own mount namespace, effectively deletes all system cgroups: $ ls /sys/fs/cgroup | wc -l 27 $ sudo ./test_progs -t cgroup1_hierarchy torvalds#41/1 cgroup1_hierarchy/test_cgroup1_hierarchy:OK torvalds#41/2 cgroup1_hierarchy/test_root_cgid:OK torvalds#41/3 cgroup1_hierarchy/test_invalid_level:OK torvalds#41/4 cgroup1_hierarchy/test_invalid_cgid:OK torvalds#41/5 cgroup1_hierarchy/test_invalid_hid:OK torvalds#41/6 cgroup1_hierarchy/test_invalid_cgrp_name:OK torvalds#41/7 cgroup1_hierarchy/test_invalid_cgrp_name2:OK torvalds#41/8 cgroup1_hierarchy/test_sleepable_prog:OK torvalds#41 cgroup1_hierarchy:OK Summary: 1/8 PASSED, 0 SKIPPED, 0 FAILED $ ls /sys/fs/cgroup | wc -l 1 To avoid this, run setup_cgroup_environment first which will create an own mount namespace. This only affects the cgroupv1_hierarchy test as all other cgroup1 test progs already run setup_cgroup_environment prior to running setup_classid_environment. Also add a comment to the header of setup_classid_environment to warn against this invalid usage in future. Fixes: 3607692 ("selftests/bpf: Add selftests for cgroup1 hierarchy") Signed-off-by: Viktor Malik <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected] Signed-off-by: Sasha Levin <[email protected]>
honjow
pushed a commit
to 3003n/linux
that referenced
this pull request
May 30, 2024
[ Upstream commit 19468ed ] The cgroup1_hierarchy test uses setup_classid_environment to setup cgroupv1 environment. The problem is that the environment is set in /sys/fs/cgroup and therefore, if not run under an own mount namespace, effectively deletes all system cgroups: $ ls /sys/fs/cgroup | wc -l 27 $ sudo ./test_progs -t cgroup1_hierarchy torvalds#41/1 cgroup1_hierarchy/test_cgroup1_hierarchy:OK torvalds#41/2 cgroup1_hierarchy/test_root_cgid:OK torvalds#41/3 cgroup1_hierarchy/test_invalid_level:OK torvalds#41/4 cgroup1_hierarchy/test_invalid_cgid:OK torvalds#41/5 cgroup1_hierarchy/test_invalid_hid:OK torvalds#41/6 cgroup1_hierarchy/test_invalid_cgrp_name:OK torvalds#41/7 cgroup1_hierarchy/test_invalid_cgrp_name2:OK torvalds#41/8 cgroup1_hierarchy/test_sleepable_prog:OK torvalds#41 cgroup1_hierarchy:OK Summary: 1/8 PASSED, 0 SKIPPED, 0 FAILED $ ls /sys/fs/cgroup | wc -l 1 To avoid this, run setup_cgroup_environment first which will create an own mount namespace. This only affects the cgroupv1_hierarchy test as all other cgroup1 test progs already run setup_cgroup_environment prior to running setup_classid_environment. Also add a comment to the header of setup_classid_environment to warn against this invalid usage in future. Fixes: 3607692 ("selftests/bpf: Add selftests for cgroup1 hierarchy") Signed-off-by: Viktor Malik <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected] Signed-off-by: Sasha Levin <[email protected]>
mj22226
pushed a commit
to mj22226/linux
that referenced
this pull request
Jun 29, 2024
Fixes a hang thats triggered when MPV is run on a DCN401 dGPU: mpv --hwdec=vaapi --vo=gpu --hwdec-codecs=all and then enabling fullscreen playback (double click on the video) The following calltrace will be seen: [ 181.843989] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 181.843997] #PF: supervisor instruction fetch in kernel mode [ 181.844003] #PF: error_code(0x0010) - not-present page [ 181.844009] PGD 0 P4D 0 [ 181.844020] Oops: 0010 [#1] PREEMPT SMP NOPTI [ 181.844028] CPU: 6 PID: 1892 Comm: gnome-shell Tainted: G W OE 6.5.0-41-generic torvalds#41~22.04.2-Ubuntu [ 181.844038] Hardware name: System manufacturer System Product Name/CROSSHAIR VI HERO, BIOS 6302 10/23/2018 [ 181.844044] RIP: 0010:0x0 [ 181.844079] Code: Unable to access opcode bytes at 0xffffffffffffffd6. [ 181.844084] RSP: 0018:ffffb593c2b8f7b0 EFLAGS: 00010246 [ 181.844093] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000004 [ 181.844099] RDX: ffffb593c2b8f804 RSI: ffffb593c2b8f7e0 RDI: ffff9e3c8e758400 [ 181.844105] RBP: ffffb593c2b8f7b8 R08: ffffb593c2b8f9c8 R09: ffffb593c2b8f96c [ 181.844110] R10: 0000000000000000 R11: 0000000000000000 R12: ffffb593c2b8f9c8 [ 181.844115] R13: 0000000000000001 R14: ffff9e3c88000000 R15: 0000000000000005 [ 181.844121] FS: 00007c6e323bb5c0(0000) GS:ffff9e3f85f80000(0000) knlGS:0000000000000000 [ 181.844128] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 181.844134] CR2: ffffffffffffffd6 CR3: 0000000140fbe000 CR4: 00000000003506e0 [ 181.844141] Call Trace: [ 181.844146] <TASK> [ 181.844153] ? show_regs+0x6d/0x80 [ 181.844167] ? __die+0x24/0x80 [ 181.844179] ? page_fault_oops+0x99/0x1b0 [ 181.844192] ? do_user_addr_fault+0x31d/0x6b0 [ 181.844204] ? exc_page_fault+0x83/0x1b0 [ 181.844216] ? asm_exc_page_fault+0x27/0x30 [ 181.844237] dcn20_get_dcc_compression_cap+0x23/0x30 [amdgpu] [ 181.845115] amdgpu_dm_plane_validate_dcc.constprop.0+0xe5/0x180 [amdgpu] [ 181.845985] amdgpu_dm_plane_fill_plane_buffer_attributes+0x300/0x580 [amdgpu] [ 181.846848] fill_dc_plane_info_and_addr+0x258/0x350 [amdgpu] [ 181.847734] fill_dc_plane_attributes+0x162/0x350 [amdgpu] [ 181.848748] dm_update_plane_state.constprop.0+0x4e3/0x6b0 [amdgpu] [ 181.849791] ? dm_update_plane_state.constprop.0+0x4e3/0x6b0 [amdgpu] [ 181.850840] amdgpu_dm_atomic_check+0xdfe/0x1760 [amdgpu] Signed-off-by: Aurabindo Pillai <[email protected]> Reviewed-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
roxell
pushed a commit
to roxell/linux
that referenced
this pull request
Aug 7, 2024
When programming phantom pipe, since cursor_width is explicity set to 0, this causes calculation logic to trigger overflow for an unsigned int triggering the kernel's UBSAN check as below: [ 40.962845] UBSAN: shift-out-of-bounds in /tmp/amd.EfpumTkO/amd/amdgpu/../display/dc/dml2/dml21/src/dml2_core/dml2_core_dcn4_calcs.c:3312:34 [ 40.962849] shift exponent 4294967170 is too large for 32-bit type 'unsigned int' [ 40.962852] CPU: 1 PID: 1670 Comm: gnome-shell Tainted: G W OE 6.5.0-41-generic torvalds#41~22.04.2-Ubuntu [ 40.962854] Hardware name: Gigabyte Technology Co., Ltd. X670E AORUS PRO X/X670E AORUS PRO X, BIOS F21 01/10/2024 [ 40.962856] Call Trace: [ 40.962857] <TASK> [ 40.962860] dump_stack_lvl+0x48/0x70 [ 40.962870] dump_stack+0x10/0x20 [ 40.962872] __ubsan_handle_shift_out_of_bounds+0x1ac/0x360 [ 40.962878] calculate_cursor_req_attributes.cold+0x1b/0x28 [amdgpu] [ 40.963099] dml_core_mode_support+0x6b91/0x16bc0 [amdgpu] [ 40.963327] ? srso_alias_return_thunk+0x5/0x7f [ 40.963331] ? CalculateWatermarksMALLUseAndDRAMSpeedChangeSupport+0x18b8/0x2790 [amdgpu] [ 40.963534] ? srso_alias_return_thunk+0x5/0x7f [ 40.963536] ? dml_core_mode_support+0xb3db/0x16bc0 [amdgpu] [ 40.963730] dml2_core_calcs_mode_support_ex+0x2c/0x90 [amdgpu] [ 40.963906] ? srso_alias_return_thunk+0x5/0x7f [ 40.963909] ? dml2_core_calcs_mode_support_ex+0x2c/0x90 [amdgpu] [ 40.964078] core_dcn4_mode_support+0x72/0xbf0 [amdgpu] [ 40.964247] dml2_top_optimization_perform_optimization_phase+0x1d3/0x2a0 [amdgpu] [ 40.964420] dml2_build_mode_programming+0x23d/0x750 [amdgpu] [ 40.964587] dml21_validate+0x274/0x770 [amdgpu] [ 40.964761] ? srso_alias_return_thunk+0x5/0x7f [ 40.964763] ? resource_append_dpp_pipes_for_plane_composition+0x27c/0x3b0 [amdgpu] [ 40.964942] dml2_validate+0x504/0x750 [amdgpu] [ 40.965117] ? dml21_copy+0x95/0xb0 [amdgpu] [ 40.965291] ? srso_alias_return_thunk+0x5/0x7f [ 40.965295] dcn401_validate_bandwidth+0x4e/0x70 [amdgpu] [ 40.965491] update_planes_and_stream_state+0x38d/0x5c0 [amdgpu] [ 40.965672] update_planes_and_stream_v3+0x52/0x1e0 [amdgpu] [ 40.965845] ? srso_alias_return_thunk+0x5/0x7f [ 40.965849] dc_update_planes_and_stream+0x71/0xb0 [amdgpu] Fix this by adding a guard for checking cursor width before triggering the size calculation. Reviewed-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Aurabindo Pillai <[email protected]> Signed-off-by: Wayne Lin <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
Kaz205
pushed a commit
to Kaz205/linux
that referenced
this pull request
Aug 14, 2024
[ Upstream commit ecbf607 ] Fixes a hang thats triggered when MPV is run on a DCN401 dGPU: mpv --hwdec=vaapi --vo=gpu --hwdec-codecs=all and then enabling fullscreen playback (double click on the video) The following calltrace will be seen: [ 181.843989] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 181.843997] #PF: supervisor instruction fetch in kernel mode [ 181.844003] #PF: error_code(0x0010) - not-present page [ 181.844009] PGD 0 P4D 0 [ 181.844020] Oops: 0010 [#1] PREEMPT SMP NOPTI [ 181.844028] CPU: 6 PID: 1892 Comm: gnome-shell Tainted: G W OE 6.5.0-41-generic torvalds#41~22.04.2-Ubuntu [ 181.844038] Hardware name: System manufacturer System Product Name/CROSSHAIR VI HERO, BIOS 6302 10/23/2018 [ 181.844044] RIP: 0010:0x0 [ 181.844079] Code: Unable to access opcode bytes at 0xffffffffffffffd6. [ 181.844084] RSP: 0018:ffffb593c2b8f7b0 EFLAGS: 00010246 [ 181.844093] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000004 [ 181.844099] RDX: ffffb593c2b8f804 RSI: ffffb593c2b8f7e0 RDI: ffff9e3c8e758400 [ 181.844105] RBP: ffffb593c2b8f7b8 R08: ffffb593c2b8f9c8 R09: ffffb593c2b8f96c [ 181.844110] R10: 0000000000000000 R11: 0000000000000000 R12: ffffb593c2b8f9c8 [ 181.844115] R13: 0000000000000001 R14: ffff9e3c88000000 R15: 0000000000000005 [ 181.844121] FS: 00007c6e323bb5c0(0000) GS:ffff9e3f85f80000(0000) knlGS:0000000000000000 [ 181.844128] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 181.844134] CR2: ffffffffffffffd6 CR3: 0000000140fbe000 CR4: 00000000003506e0 [ 181.844141] Call Trace: [ 181.844146] <TASK> [ 181.844153] ? show_regs+0x6d/0x80 [ 181.844167] ? __die+0x24/0x80 [ 181.844179] ? page_fault_oops+0x99/0x1b0 [ 181.844192] ? do_user_addr_fault+0x31d/0x6b0 [ 181.844204] ? exc_page_fault+0x83/0x1b0 [ 181.844216] ? asm_exc_page_fault+0x27/0x30 [ 181.844237] dcn20_get_dcc_compression_cap+0x23/0x30 [amdgpu] [ 181.845115] amdgpu_dm_plane_validate_dcc.constprop.0+0xe5/0x180 [amdgpu] [ 181.845985] amdgpu_dm_plane_fill_plane_buffer_attributes+0x300/0x580 [amdgpu] [ 181.846848] fill_dc_plane_info_and_addr+0x258/0x350 [amdgpu] [ 181.847734] fill_dc_plane_attributes+0x162/0x350 [amdgpu] [ 181.848748] dm_update_plane_state.constprop.0+0x4e3/0x6b0 [amdgpu] [ 181.849791] ? dm_update_plane_state.constprop.0+0x4e3/0x6b0 [amdgpu] [ 181.850840] amdgpu_dm_atomic_check+0xdfe/0x1760 [amdgpu] Signed-off-by: Aurabindo Pillai <[email protected]> Reviewed-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Kaz205
pushed a commit
to Kaz205/linux
that referenced
this pull request
Aug 14, 2024
[ Upstream commit ecbf607 ] Fixes a hang thats triggered when MPV is run on a DCN401 dGPU: mpv --hwdec=vaapi --vo=gpu --hwdec-codecs=all and then enabling fullscreen playback (double click on the video) The following calltrace will be seen: [ 181.843989] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 181.843997] #PF: supervisor instruction fetch in kernel mode [ 181.844003] #PF: error_code(0x0010) - not-present page [ 181.844009] PGD 0 P4D 0 [ 181.844020] Oops: 0010 [#1] PREEMPT SMP NOPTI [ 181.844028] CPU: 6 PID: 1892 Comm: gnome-shell Tainted: G W OE 6.5.0-41-generic torvalds#41~22.04.2-Ubuntu [ 181.844038] Hardware name: System manufacturer System Product Name/CROSSHAIR VI HERO, BIOS 6302 10/23/2018 [ 181.844044] RIP: 0010:0x0 [ 181.844079] Code: Unable to access opcode bytes at 0xffffffffffffffd6. [ 181.844084] RSP: 0018:ffffb593c2b8f7b0 EFLAGS: 00010246 [ 181.844093] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000004 [ 181.844099] RDX: ffffb593c2b8f804 RSI: ffffb593c2b8f7e0 RDI: ffff9e3c8e758400 [ 181.844105] RBP: ffffb593c2b8f7b8 R08: ffffb593c2b8f9c8 R09: ffffb593c2b8f96c [ 181.844110] R10: 0000000000000000 R11: 0000000000000000 R12: ffffb593c2b8f9c8 [ 181.844115] R13: 0000000000000001 R14: ffff9e3c88000000 R15: 0000000000000005 [ 181.844121] FS: 00007c6e323bb5c0(0000) GS:ffff9e3f85f80000(0000) knlGS:0000000000000000 [ 181.844128] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 181.844134] CR2: ffffffffffffffd6 CR3: 0000000140fbe000 CR4: 00000000003506e0 [ 181.844141] Call Trace: [ 181.844146] <TASK> [ 181.844153] ? show_regs+0x6d/0x80 [ 181.844167] ? __die+0x24/0x80 [ 181.844179] ? page_fault_oops+0x99/0x1b0 [ 181.844192] ? do_user_addr_fault+0x31d/0x6b0 [ 181.844204] ? exc_page_fault+0x83/0x1b0 [ 181.844216] ? asm_exc_page_fault+0x27/0x30 [ 181.844237] dcn20_get_dcc_compression_cap+0x23/0x30 [amdgpu] [ 181.845115] amdgpu_dm_plane_validate_dcc.constprop.0+0xe5/0x180 [amdgpu] [ 181.845985] amdgpu_dm_plane_fill_plane_buffer_attributes+0x300/0x580 [amdgpu] [ 181.846848] fill_dc_plane_info_and_addr+0x258/0x350 [amdgpu] [ 181.847734] fill_dc_plane_attributes+0x162/0x350 [amdgpu] [ 181.848748] dm_update_plane_state.constprop.0+0x4e3/0x6b0 [amdgpu] [ 181.849791] ? dm_update_plane_state.constprop.0+0x4e3/0x6b0 [amdgpu] [ 181.850840] amdgpu_dm_atomic_check+0xdfe/0x1760 [amdgpu] Signed-off-by: Aurabindo Pillai <[email protected]> Reviewed-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
intersectRaven
pushed a commit
to intersectRaven/linux
that referenced
this pull request
Aug 14, 2024
[ Upstream commit ecbf607 ] Fixes a hang thats triggered when MPV is run on a DCN401 dGPU: mpv --hwdec=vaapi --vo=gpu --hwdec-codecs=all and then enabling fullscreen playback (double click on the video) The following calltrace will be seen: [ 181.843989] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 181.843997] #PF: supervisor instruction fetch in kernel mode [ 181.844003] #PF: error_code(0x0010) - not-present page [ 181.844009] PGD 0 P4D 0 [ 181.844020] Oops: 0010 [#1] PREEMPT SMP NOPTI [ 181.844028] CPU: 6 PID: 1892 Comm: gnome-shell Tainted: G W OE 6.5.0-41-generic torvalds#41~22.04.2-Ubuntu [ 181.844038] Hardware name: System manufacturer System Product Name/CROSSHAIR VI HERO, BIOS 6302 10/23/2018 [ 181.844044] RIP: 0010:0x0 [ 181.844079] Code: Unable to access opcode bytes at 0xffffffffffffffd6. [ 181.844084] RSP: 0018:ffffb593c2b8f7b0 EFLAGS: 00010246 [ 181.844093] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000004 [ 181.844099] RDX: ffffb593c2b8f804 RSI: ffffb593c2b8f7e0 RDI: ffff9e3c8e758400 [ 181.844105] RBP: ffffb593c2b8f7b8 R08: ffffb593c2b8f9c8 R09: ffffb593c2b8f96c [ 181.844110] R10: 0000000000000000 R11: 0000000000000000 R12: ffffb593c2b8f9c8 [ 181.844115] R13: 0000000000000001 R14: ffff9e3c88000000 R15: 0000000000000005 [ 181.844121] FS: 00007c6e323bb5c0(0000) GS:ffff9e3f85f80000(0000) knlGS:0000000000000000 [ 181.844128] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 181.844134] CR2: ffffffffffffffd6 CR3: 0000000140fbe000 CR4: 00000000003506e0 [ 181.844141] Call Trace: [ 181.844146] <TASK> [ 181.844153] ? show_regs+0x6d/0x80 [ 181.844167] ? __die+0x24/0x80 [ 181.844179] ? page_fault_oops+0x99/0x1b0 [ 181.844192] ? do_user_addr_fault+0x31d/0x6b0 [ 181.844204] ? exc_page_fault+0x83/0x1b0 [ 181.844216] ? asm_exc_page_fault+0x27/0x30 [ 181.844237] dcn20_get_dcc_compression_cap+0x23/0x30 [amdgpu] [ 181.845115] amdgpu_dm_plane_validate_dcc.constprop.0+0xe5/0x180 [amdgpu] [ 181.845985] amdgpu_dm_plane_fill_plane_buffer_attributes+0x300/0x580 [amdgpu] [ 181.846848] fill_dc_plane_info_and_addr+0x258/0x350 [amdgpu] [ 181.847734] fill_dc_plane_attributes+0x162/0x350 [amdgpu] [ 181.848748] dm_update_plane_state.constprop.0+0x4e3/0x6b0 [amdgpu] [ 181.849791] ? dm_update_plane_state.constprop.0+0x4e3/0x6b0 [amdgpu] [ 181.850840] amdgpu_dm_atomic_check+0xdfe/0x1760 [amdgpu] Signed-off-by: Aurabindo Pillai <[email protected]> Reviewed-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
intel-lab-lkp
pushed a commit
to intel-lab-lkp/linux
that referenced
this pull request
Sep 4, 2024
Fixes a hang thats triggered when MPV is run on a DCN401 dGPU: mpv --hwdec=vaapi --vo=gpu --hwdec-codecs=all and then enabling fullscreen playback (double click on the video) The following calltrace will be seen: [ 181.843989] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 181.843997] #PF: supervisor instruction fetch in kernel mode [ 181.844003] #PF: error_code(0x0010) - not-present page [ 181.844009] PGD 0 P4D 0 [ 181.844020] Oops: 0010 [#1] PREEMPT SMP NOPTI [ 181.844028] CPU: 6 PID: 1892 Comm: gnome-shell Tainted: G W OE 6.5.0-41-generic torvalds#41~22.04.2-Ubuntu [ 181.844038] Hardware name: System manufacturer System Product Name/CROSSHAIR VI HERO, BIOS 6302 10/23/2018 [ 181.844044] RIP: 0010:0x0 [ 181.844079] Code: Unable to access opcode bytes at 0xffffffffffffffd6. [ 181.844084] RSP: 0018:ffffb593c2b8f7b0 EFLAGS: 00010246 [ 181.844093] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000004 [ 181.844099] RDX: ffffb593c2b8f804 RSI: ffffb593c2b8f7e0 RDI: ffff9e3c8e758400 [ 181.844105] RBP: ffffb593c2b8f7b8 R08: ffffb593c2b8f9c8 R09: ffffb593c2b8f96c [ 181.844110] R10: 0000000000000000 R11: 0000000000000000 R12: ffffb593c2b8f9c8 [ 181.844115] R13: 0000000000000001 R14: ffff9e3c88000000 R15: 0000000000000005 [ 181.844121] FS: 00007c6e323bb5c0(0000) GS:ffff9e3f85f80000(0000) knlGS:0000000000000000 [ 181.844128] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 181.844134] CR2: ffffffffffffffd6 CR3: 0000000140fbe000 CR4: 00000000003506e0 [ 181.844141] Call Trace: [ 181.844146] <TASK> [ 181.844153] ? show_regs+0x6d/0x80 [ 181.844167] ? __die+0x24/0x80 [ 181.844179] ? page_fault_oops+0x99/0x1b0 [ 181.844192] ? do_user_addr_fault+0x31d/0x6b0 [ 181.844204] ? exc_page_fault+0x83/0x1b0 [ 181.844216] ? asm_exc_page_fault+0x27/0x30 [ 181.844237] dcn20_get_dcc_compression_cap+0x23/0x30 [amdgpu] [ 181.845115] amdgpu_dm_plane_validate_dcc.constprop.0+0xe5/0x180 [amdgpu] [ 181.845985] amdgpu_dm_plane_fill_plane_buffer_attributes+0x300/0x580 [amdgpu] [ 181.846848] fill_dc_plane_info_and_addr+0x258/0x350 [amdgpu] [ 181.847734] fill_dc_plane_attributes+0x162/0x350 [amdgpu] [ 181.848748] dm_update_plane_state.constprop.0+0x4e3/0x6b0 [amdgpu] [ 181.849791] ? dm_update_plane_state.constprop.0+0x4e3/0x6b0 [amdgpu] [ 181.850840] amdgpu_dm_atomic_check+0xdfe/0x1760 [amdgpu] Signed-off-by: Aurabindo Pillai <[email protected]> Reviewed-by: Rodrigo Siqueira <[email protected]>
intel-lab-lkp
pushed a commit
to intel-lab-lkp/linux
that referenced
this pull request
Sep 4, 2024
When programming phantom pipe, since cursor_width is explicity set to 0, this causes calculation logic to trigger overflow for an unsigned int triggering the kernel's UBSAN check as below: [ 40.962845] UBSAN: shift-out-of-bounds in /tmp/amd.EfpumTkO/amd/amdgpu/../display/dc/dml2/dml21/src/dml2_core/dml2_core_dcn4_calcs.c:3312:34 [ 40.962849] shift exponent 4294967170 is too large for 32-bit type 'unsigned int' [ 40.962852] CPU: 1 PID: 1670 Comm: gnome-shell Tainted: G W OE 6.5.0-41-generic torvalds#41~22.04.2-Ubuntu [ 40.962854] Hardware name: Gigabyte Technology Co., Ltd. X670E AORUS PRO X/X670E AORUS PRO X, BIOS F21 01/10/2024 [ 40.962856] Call Trace: [ 40.962857] <TASK> [ 40.962860] dump_stack_lvl+0x48/0x70 [ 40.962870] dump_stack+0x10/0x20 [ 40.962872] __ubsan_handle_shift_out_of_bounds+0x1ac/0x360 [ 40.962878] calculate_cursor_req_attributes.cold+0x1b/0x28 [amdgpu] [ 40.963099] dml_core_mode_support+0x6b91/0x16bc0 [amdgpu] [ 40.963327] ? srso_alias_return_thunk+0x5/0x7f [ 40.963331] ? CalculateWatermarksMALLUseAndDRAMSpeedChangeSupport+0x18b8/0x2790 [amdgpu] [ 40.963534] ? srso_alias_return_thunk+0x5/0x7f [ 40.963536] ? dml_core_mode_support+0xb3db/0x16bc0 [amdgpu] [ 40.963730] dml2_core_calcs_mode_support_ex+0x2c/0x90 [amdgpu] [ 40.963906] ? srso_alias_return_thunk+0x5/0x7f [ 40.963909] ? dml2_core_calcs_mode_support_ex+0x2c/0x90 [amdgpu] [ 40.964078] core_dcn4_mode_support+0x72/0xbf0 [amdgpu] [ 40.964247] dml2_top_optimization_perform_optimization_phase+0x1d3/0x2a0 [amdgpu] [ 40.964420] dml2_build_mode_programming+0x23d/0x750 [amdgpu] [ 40.964587] dml21_validate+0x274/0x770 [amdgpu] [ 40.964761] ? srso_alias_return_thunk+0x5/0x7f [ 40.964763] ? resource_append_dpp_pipes_for_plane_composition+0x27c/0x3b0 [amdgpu] [ 40.964942] dml2_validate+0x504/0x750 [amdgpu] [ 40.965117] ? dml21_copy+0x95/0xb0 [amdgpu] [ 40.965291] ? srso_alias_return_thunk+0x5/0x7f [ 40.965295] dcn401_validate_bandwidth+0x4e/0x70 [amdgpu] [ 40.965491] update_planes_and_stream_state+0x38d/0x5c0 [amdgpu] [ 40.965672] update_planes_and_stream_v3+0x52/0x1e0 [amdgpu] [ 40.965845] ? srso_alias_return_thunk+0x5/0x7f [ 40.965849] dc_update_planes_and_stream+0x71/0xb0 [amdgpu] Fix this by adding a guard for checking cursor width before triggering the size calculation. Reviewed-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Aurabindo Pillai <[email protected]> Signed-off-by: Wayne Lin <[email protected]> Tested-by: Daniel Wheeler <[email protected]>
mj22226
pushed a commit
to mj22226/linux
that referenced
this pull request
Oct 8, 2024
[ Upstream commit eaf3adb ] When programming phantom pipe, since cursor_width is explicity set to 0, this causes calculation logic to trigger overflow for an unsigned int triggering the kernel's UBSAN check as below: [ 40.962845] UBSAN: shift-out-of-bounds in /tmp/amd.EfpumTkO/amd/amdgpu/../display/dc/dml2/dml21/src/dml2_core/dml2_core_dcn4_calcs.c:3312:34 [ 40.962849] shift exponent 4294967170 is too large for 32-bit type 'unsigned int' [ 40.962852] CPU: 1 PID: 1670 Comm: gnome-shell Tainted: G W OE 6.5.0-41-generic torvalds#41~22.04.2-Ubuntu [ 40.962854] Hardware name: Gigabyte Technology Co., Ltd. X670E AORUS PRO X/X670E AORUS PRO X, BIOS F21 01/10/2024 [ 40.962856] Call Trace: [ 40.962857] <TASK> [ 40.962860] dump_stack_lvl+0x48/0x70 [ 40.962870] dump_stack+0x10/0x20 [ 40.962872] __ubsan_handle_shift_out_of_bounds+0x1ac/0x360 [ 40.962878] calculate_cursor_req_attributes.cold+0x1b/0x28 [amdgpu] [ 40.963099] dml_core_mode_support+0x6b91/0x16bc0 [amdgpu] [ 40.963327] ? srso_alias_return_thunk+0x5/0x7f [ 40.963331] ? CalculateWatermarksMALLUseAndDRAMSpeedChangeSupport+0x18b8/0x2790 [amdgpu] [ 40.963534] ? srso_alias_return_thunk+0x5/0x7f [ 40.963536] ? dml_core_mode_support+0xb3db/0x16bc0 [amdgpu] [ 40.963730] dml2_core_calcs_mode_support_ex+0x2c/0x90 [amdgpu] [ 40.963906] ? srso_alias_return_thunk+0x5/0x7f [ 40.963909] ? dml2_core_calcs_mode_support_ex+0x2c/0x90 [amdgpu] [ 40.964078] core_dcn4_mode_support+0x72/0xbf0 [amdgpu] [ 40.964247] dml2_top_optimization_perform_optimization_phase+0x1d3/0x2a0 [amdgpu] [ 40.964420] dml2_build_mode_programming+0x23d/0x750 [amdgpu] [ 40.964587] dml21_validate+0x274/0x770 [amdgpu] [ 40.964761] ? srso_alias_return_thunk+0x5/0x7f [ 40.964763] ? resource_append_dpp_pipes_for_plane_composition+0x27c/0x3b0 [amdgpu] [ 40.964942] dml2_validate+0x504/0x750 [amdgpu] [ 40.965117] ? dml21_copy+0x95/0xb0 [amdgpu] [ 40.965291] ? srso_alias_return_thunk+0x5/0x7f [ 40.965295] dcn401_validate_bandwidth+0x4e/0x70 [amdgpu] [ 40.965491] update_planes_and_stream_state+0x38d/0x5c0 [amdgpu] [ 40.965672] update_planes_and_stream_v3+0x52/0x1e0 [amdgpu] [ 40.965845] ? srso_alias_return_thunk+0x5/0x7f [ 40.965849] dc_update_planes_and_stream+0x71/0xb0 [amdgpu] Fix this by adding a guard for checking cursor width before triggering the size calculation. Reviewed-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Aurabindo Pillai <[email protected]> Signed-off-by: Wayne Lin <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
mj22226
pushed a commit
to mj22226/linux
that referenced
this pull request
Oct 8, 2024
[ Upstream commit eaf3adb ] When programming phantom pipe, since cursor_width is explicity set to 0, this causes calculation logic to trigger overflow for an unsigned int triggering the kernel's UBSAN check as below: [ 40.962845] UBSAN: shift-out-of-bounds in /tmp/amd.EfpumTkO/amd/amdgpu/../display/dc/dml2/dml21/src/dml2_core/dml2_core_dcn4_calcs.c:3312:34 [ 40.962849] shift exponent 4294967170 is too large for 32-bit type 'unsigned int' [ 40.962852] CPU: 1 PID: 1670 Comm: gnome-shell Tainted: G W OE 6.5.0-41-generic torvalds#41~22.04.2-Ubuntu [ 40.962854] Hardware name: Gigabyte Technology Co., Ltd. X670E AORUS PRO X/X670E AORUS PRO X, BIOS F21 01/10/2024 [ 40.962856] Call Trace: [ 40.962857] <TASK> [ 40.962860] dump_stack_lvl+0x48/0x70 [ 40.962870] dump_stack+0x10/0x20 [ 40.962872] __ubsan_handle_shift_out_of_bounds+0x1ac/0x360 [ 40.962878] calculate_cursor_req_attributes.cold+0x1b/0x28 [amdgpu] [ 40.963099] dml_core_mode_support+0x6b91/0x16bc0 [amdgpu] [ 40.963327] ? srso_alias_return_thunk+0x5/0x7f [ 40.963331] ? CalculateWatermarksMALLUseAndDRAMSpeedChangeSupport+0x18b8/0x2790 [amdgpu] [ 40.963534] ? srso_alias_return_thunk+0x5/0x7f [ 40.963536] ? dml_core_mode_support+0xb3db/0x16bc0 [amdgpu] [ 40.963730] dml2_core_calcs_mode_support_ex+0x2c/0x90 [amdgpu] [ 40.963906] ? srso_alias_return_thunk+0x5/0x7f [ 40.963909] ? dml2_core_calcs_mode_support_ex+0x2c/0x90 [amdgpu] [ 40.964078] core_dcn4_mode_support+0x72/0xbf0 [amdgpu] [ 40.964247] dml2_top_optimization_perform_optimization_phase+0x1d3/0x2a0 [amdgpu] [ 40.964420] dml2_build_mode_programming+0x23d/0x750 [amdgpu] [ 40.964587] dml21_validate+0x274/0x770 [amdgpu] [ 40.964761] ? srso_alias_return_thunk+0x5/0x7f [ 40.964763] ? resource_append_dpp_pipes_for_plane_composition+0x27c/0x3b0 [amdgpu] [ 40.964942] dml2_validate+0x504/0x750 [amdgpu] [ 40.965117] ? dml21_copy+0x95/0xb0 [amdgpu] [ 40.965291] ? srso_alias_return_thunk+0x5/0x7f [ 40.965295] dcn401_validate_bandwidth+0x4e/0x70 [amdgpu] [ 40.965491] update_planes_and_stream_state+0x38d/0x5c0 [amdgpu] [ 40.965672] update_planes_and_stream_v3+0x52/0x1e0 [amdgpu] [ 40.965845] ? srso_alias_return_thunk+0x5/0x7f [ 40.965849] dc_update_planes_and_stream+0x71/0xb0 [amdgpu] Fix this by adding a guard for checking cursor width before triggering the size calculation. Reviewed-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Aurabindo Pillai <[email protected]> Signed-off-by: Wayne Lin <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
intersectRaven
pushed a commit
to intersectRaven/linux
that referenced
this pull request
Oct 10, 2024
[ Upstream commit eaf3adb ] When programming phantom pipe, since cursor_width is explicity set to 0, this causes calculation logic to trigger overflow for an unsigned int triggering the kernel's UBSAN check as below: [ 40.962845] UBSAN: shift-out-of-bounds in /tmp/amd.EfpumTkO/amd/amdgpu/../display/dc/dml2/dml21/src/dml2_core/dml2_core_dcn4_calcs.c:3312:34 [ 40.962849] shift exponent 4294967170 is too large for 32-bit type 'unsigned int' [ 40.962852] CPU: 1 PID: 1670 Comm: gnome-shell Tainted: G W OE 6.5.0-41-generic torvalds#41~22.04.2-Ubuntu [ 40.962854] Hardware name: Gigabyte Technology Co., Ltd. X670E AORUS PRO X/X670E AORUS PRO X, BIOS F21 01/10/2024 [ 40.962856] Call Trace: [ 40.962857] <TASK> [ 40.962860] dump_stack_lvl+0x48/0x70 [ 40.962870] dump_stack+0x10/0x20 [ 40.962872] __ubsan_handle_shift_out_of_bounds+0x1ac/0x360 [ 40.962878] calculate_cursor_req_attributes.cold+0x1b/0x28 [amdgpu] [ 40.963099] dml_core_mode_support+0x6b91/0x16bc0 [amdgpu] [ 40.963327] ? srso_alias_return_thunk+0x5/0x7f [ 40.963331] ? CalculateWatermarksMALLUseAndDRAMSpeedChangeSupport+0x18b8/0x2790 [amdgpu] [ 40.963534] ? srso_alias_return_thunk+0x5/0x7f [ 40.963536] ? dml_core_mode_support+0xb3db/0x16bc0 [amdgpu] [ 40.963730] dml2_core_calcs_mode_support_ex+0x2c/0x90 [amdgpu] [ 40.963906] ? srso_alias_return_thunk+0x5/0x7f [ 40.963909] ? dml2_core_calcs_mode_support_ex+0x2c/0x90 [amdgpu] [ 40.964078] core_dcn4_mode_support+0x72/0xbf0 [amdgpu] [ 40.964247] dml2_top_optimization_perform_optimization_phase+0x1d3/0x2a0 [amdgpu] [ 40.964420] dml2_build_mode_programming+0x23d/0x750 [amdgpu] [ 40.964587] dml21_validate+0x274/0x770 [amdgpu] [ 40.964761] ? srso_alias_return_thunk+0x5/0x7f [ 40.964763] ? resource_append_dpp_pipes_for_plane_composition+0x27c/0x3b0 [amdgpu] [ 40.964942] dml2_validate+0x504/0x750 [amdgpu] [ 40.965117] ? dml21_copy+0x95/0xb0 [amdgpu] [ 40.965291] ? srso_alias_return_thunk+0x5/0x7f [ 40.965295] dcn401_validate_bandwidth+0x4e/0x70 [amdgpu] [ 40.965491] update_planes_and_stream_state+0x38d/0x5c0 [amdgpu] [ 40.965672] update_planes_and_stream_v3+0x52/0x1e0 [amdgpu] [ 40.965845] ? srso_alias_return_thunk+0x5/0x7f [ 40.965849] dc_update_planes_and_stream+0x71/0xb0 [amdgpu] Fix this by adding a guard for checking cursor width before triggering the size calculation. Reviewed-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Aurabindo Pillai <[email protected]> Signed-off-by: Wayne Lin <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
ioworker0
pushed a commit
to ioworker0/linux
that referenced
this pull request
Dec 1, 2024
…_direct_reclaim-checkpatch-fixes ERROR: trailing whitespace torvalds#40: FILE: mm/vmscan.c:378: +^I * If there are no reclaimable file-backed or anonymous pages, $ ERROR: trailing whitespace torvalds#41: FILE: mm/vmscan.c:379: +^I * ensure zones with sufficient free pages are not skipped. $ ERROR: trailing whitespace torvalds#42: FILE: mm/vmscan.c:380: +^I * This prevents zones like DMA32 from being ignored in reclaim $ WARNING: suspect code indent for conditional statements (8, 12) torvalds#45: FILE: mm/vmscan.c:383: + if (nr == 0) + nr = zone_page_state_snapshot(zone, NR_FREE_PAGES); total: 3 errors, 1 warnings, 15 lines checked Cc: Mel Gorman <[email protected]> Cc: Seiji Nishikawa <[email protected]> Signed-off-by: Andrew Morton <[email protected]>
ioworker0
pushed a commit
to ioworker0/linux
that referenced
this pull request
Dec 3, 2024
…_direct_reclaim-checkpatch-fixes ERROR: trailing whitespace torvalds#40: FILE: mm/vmscan.c:378: +^I * If there are no reclaimable file-backed or anonymous pages, $ ERROR: trailing whitespace torvalds#41: FILE: mm/vmscan.c:379: +^I * ensure zones with sufficient free pages are not skipped. $ ERROR: trailing whitespace torvalds#42: FILE: mm/vmscan.c:380: +^I * This prevents zones like DMA32 from being ignored in reclaim $ WARNING: suspect code indent for conditional statements (8, 12) torvalds#45: FILE: mm/vmscan.c:383: + if (nr == 0) + nr = zone_page_state_snapshot(zone, NR_FREE_PAGES); total: 3 errors, 1 warnings, 15 lines checked Cc: Mel Gorman <[email protected]> Cc: Seiji Nishikawa <[email protected]> Signed-off-by: Andrew Morton <[email protected]>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
pull-linuxmaster