staging: comedi: addi_apci_1032: check INSN_CONFIG_DIGITAL_TRIG shift

The `INSN_CONFIG` comedi instruction with sub-instruction code
`INSN_CONFIG_DIGITAL_TRIG` includes a base channel in `data[3]`. This is
used as a right shift amount for other bitmask values without being
checked.  Shift amounts greater than or equal to 32 will result in
undefined behavior.  Add code to deal with this.

Fixes: 33cdce6 ("staging: comedi: addi_apci_1032: conform to new INSN_CONFIG_DIGITAL_TRIG")
Cc: <[email protected]> gregkh#3.8+
Signed-off-by: Ian Abbott <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

drivers/staging/comedi/drivers/addi_apci_1032.c

@@ -106,14 +106,22 @@ static int apci1032_cos_insn_config(struct comedi_device *dev,
 				    unsigned int *data)
 {
 	struct apci1032_private *devpriv = dev->private;
-	unsigned int shift, oldmask;
+	unsigned int shift, oldmask, himask, lomask;
 
 	switch (data[0]) {
 	case INSN_CONFIG_DIGITAL_TRIG:
 		if (data[1] != 0)
 			return -EINVAL;
 		shift = data[3];
-		oldmask = (1U << shift) - 1;
+		if (shift < 32) {
+			oldmask = (1U << shift) - 1;
+			himask = data[4] << shift;
+			lomask = data[5] << shift;
+		} else {
+			oldmask = 0xffffffffu;
+			himask = 0;
+			lomask = 0;
+		}
 		switch (data[2]) {
 		case COMEDI_DIGITAL_TRIG_DISABLE:
 			devpriv->ctrl = 0;
@@ -136,8 +144,8 @@ static int apci1032_cos_insn_config(struct comedi_device *dev,
 				devpriv->mode2 &= oldmask;
 			}
 			/* configure specified channels */
-			devpriv->mode1 |= data[4] << shift;
-			devpriv->mode2 |= data[5] << shift;
+			devpriv->mode1 |= himask;
+			devpriv->mode2 |= lomask;
 			break;
 		case COMEDI_DIGITAL_TRIG_ENABLE_LEVELS:
 			if (devpriv->ctrl != (APCI1032_CTRL_INT_ENA |
@@ -154,8 +162,8 @@ static int apci1032_cos_insn_config(struct comedi_device *dev,
 				devpriv->mode2 &= oldmask;
 			}
 			/* configure specified channels */
-			devpriv->mode1 |= data[4] << shift;
-			devpriv->mode2 |= data[5] << shift;
+			devpriv->mode1 |= himask;
+			devpriv->mode2 |= lomask;
 			break;
 		default:
 			return -EINVAL;