Relicense as SSPL #3

stuardreinhild · 2021-01-28T14:40:43Z

This is crucial to be able to host the brand new doubled-down source-open Elasticsearch on Linux.

The hard work to relicense the whole kernel has been sponsored by the legal department of Elastic. 🎉

This is crucial to be able to host the brand new doubled-down source-open Elasticsearch on Linux. Signed-off-by: Stuart Reinhild

gregkh

Forgot to put your real email address in your signed-off-by line.

stuardreinhild · 2021-01-28T15:11:21Z

I don’t use real email, I only use services of Deutsche Post AG for all my correspondence.

gregkh · 2021-01-28T15:30:12Z

Then sorry, no patches will be accepted in this manner.

…/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 fixes for 5.11, take #3 - Avoid clobbering extra registers on initialisation

commit b25b0b8 upstream. With the following patches: - btrfs: backref, only collect file extent items matching backref offset - btrfs: backref, not adding refs from shared block when resolving normal backref - btrfs: backref, only search backref entries from leaves of the same root we only collect the normal data refs we want, so the imprecise upper bound total_refs of that EXTENT_ITEM could now be changed to the count of the normal backref entry we want to search. Background and how the patches fit together: Btrfs has two types of data backref. For BTRFS_EXTENT_DATA_REF_KEY type of backref, we don't have the exact block number. Therefore, we need to call resolve_indirect_refs. It uses btrfs_search_slot to locate the leaf block. Then we need to walk through the leaves to search for the EXTENT_DATA items that have disk bytenr matching the extent item (add_all_parents). When resolving indirect refs, we could take entries that don't belong to the backref entry we are searching for right now. For that reason when searching backref entry, we always use total refs of that EXTENT_ITEM rather than individual count. For example: item 11 key (40831553536 EXTENT_ITEM 4194304) itemoff 15460 itemsize extent refs 24 gen 7302 flags DATA shared data backref parent 394985472 count 10 #1 extent data backref root 257 objectid 260 offset 1048576 count 3 #2 extent data backref root 256 objectid 260 offset 65536 count 6 #3 extent data backref root 257 objectid 260 offset 65536 count 5 #4 For example, when searching backref entry #4, we'll use total_refs 24, a very loose loop ending condition, instead of total_refs = 5. But using total_refs = 24 is not accurate. Sometimes, we'll never find all the refs from specific root. As a result, the loop keeps on going until we reach the end of that inode. The first 3 patches, handle 3 different types refs we might encounter. These refs do not belong to the normal backref we are searching, and hence need to be skipped. This patch changes the total_refs to correct number so that we could end loop as soon as we find all the refs we want. btrfs send uses backref to find possible clone sources, the following is a simple test to compare the results with and without this patch: $ btrfs subvolume create /sub1 $ for i in `seq 1 163840`; do dd if=/dev/zero of=/sub1/file bs=64K count=1 seek=$((i-1)) conv=notrunc oflag=direct done $ btrfs subvolume snapshot /sub1 /sub2 $ for i in `seq 1 163840`; do dd if=/dev/zero of=/sub1/file bs=4K count=1 seek=$(((i-1)*16+10)) conv=notrunc oflag=direct done $ btrfs subvolume snapshot -r /sub1 /snap1 $ time btrfs send /snap1 | btrfs receive /volume2 Without this patch: real 69m48.124s user 0m50.199s sys 70m15.600s With this patch: real 1m59.683s user 0m35.421s sys 2m42.684s Reviewed-by: Josef Bacik <[email protected]> Reviewed-by: Johannes Thumshirn <[email protected]> Signed-off-by: ethanwu <[email protected]> [ add patchset cover letter with background and numbers ] Signed-off-by: David Sterba <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

…se_mm This fix the bad fault reported by KUAP when io_wqe_worker access userspace. Bug: Read fault blocked by KUAP! WARNING: CPU: 1 PID: 101841 at arch/powerpc/mm/fault.c:229 __do_page_fault+0x6b4/0xcd0 NIP [c00000000009e7e4] __do_page_fault+0x6b4/0xcd0 LR [c00000000009e7e0] __do_page_fault+0x6b0/0xcd0 .......... Call Trace: [c000000016367330] [c00000000009e7e0] __do_page_fault+0x6b0/0xcd0 (unreliable) [c0000000163673e0] [c00000000009ee3c] do_page_fault+0x3c/0x120 [c000000016367430] [c00000000000c848] handle_page_fault+0x10/0x2c --- interrupt: 300 at iov_iter_fault_in_readable+0x148/0x6f0 .......... NIP [c0000000008e8228] iov_iter_fault_in_readable+0x148/0x6f0 LR [c0000000008e834c] iov_iter_fault_in_readable+0x26c/0x6f0 interrupt: 300 [c0000000163677e0] [c0000000007154a0] iomap_write_actor+0xc0/0x280 [c000000016367880] [c00000000070fc94] iomap_apply+0x1c4/0x780 [c000000016367990] [c000000000710330] iomap_file_buffered_write+0xa0/0x120 [c0000000163679e0] [c00800000040791c] xfs_file_buffered_aio_write+0x314/0x5e0 [xfs] [c000000016367a90] [c0000000006d74bc] io_write+0x10c/0x460 [c000000016367bb0] [c0000000006d80e4] io_issue_sqe+0x8d4/0x1200 [c000000016367c70] [c0000000006d8ad0] io_wq_submit_work+0xc0/0x250 [c000000016367cb0] [c0000000006e2578] io_worker_handle_work+0x498/0x800 [c000000016367d40] [c0000000006e2cdc] io_wqe_worker+0x3fc/0x4f0 [c000000016367da0] [c0000000001cb0a4] kthread+0x1c4/0x1d0 [c000000016367e10] [c00000000000dbf0] ret_from_kernel_thread+0x5c/0x6c The kernel consider thread AMR value for kernel thread to be AMR_KUAP_BLOCKED. Hence access to userspace is denied. This of course not correct and we should allow userspace access after kthread_use_mm(). To be precise, kthread_use_mm() should inherit the AMR value of the operating address space. But, the AMR value is thread-specific and we inherit the address space and not thread access restrictions. Because of this ignore AMR value when accessing userspace via kernel thread. current_thread_amr/iamr() are updated, because we use them in the below stack. .... [ 530.710838] CPU: 13 PID: 5587 Comm: io_wqe_worker-0 Tainted: G D 5.11.0-rc6+ #3 .... NIP [c0000000000aa0c8] pkey_access_permitted+0x28/0x90 LR [c0000000004b9278] gup_pte_range+0x188/0x420 --- interrupt: 700 [c00000001c4ef3f0] [0000000000000000] 0x0 (unreliable) [c00000001c4ef490] [c0000000004bd39c] gup_pgd_range+0x3ac/0xa20 [c00000001c4ef5a0] [c0000000004bdd44] internal_get_user_pages_fast+0x334/0x410 [c00000001c4ef620] [c000000000852028] iov_iter_get_pages+0xf8/0x5c0 [c00000001c4ef6a0] [c0000000007da44c] bio_iov_iter_get_pages+0xec/0x700 [c00000001c4ef770] [c0000000006a325c] iomap_dio_bio_actor+0x2ac/0x4f0 [c00000001c4ef810] [c00000000069cd94] iomap_apply+0x2b4/0x740 [c00000001c4ef920] [c0000000006a38b8] __iomap_dio_rw+0x238/0x5c0 [c00000001c4ef9d0] [c0000000006a3c60] iomap_dio_rw+0x20/0x80 [c00000001c4ef9f0] [c008000001927a30] xfs_file_dio_aio_write+0x1f8/0x650 [xfs] [c00000001c4efa60] [c0080000019284dc] xfs_file_write_iter+0xc4/0x130 [xfs] [c00000001c4efa90] [c000000000669984] io_write+0x104/0x4b0 [c00000001c4efbb0] [c00000000066cea4] io_issue_sqe+0x3d4/0xf50 [c00000001c4efc60] [c000000000670200] io_wq_submit_work+0xb0/0x2f0 [c00000001c4efcb0] [c000000000674268] io_worker_handle_work+0x248/0x4a0 [c00000001c4efd30] [c0000000006746e8] io_wqe_worker+0x228/0x2a0 [c00000001c4efda0] [c00000000019d994] kthread+0x1b4/0x1c0 Fixes: 48a8ab4 ("powerpc/book3s64/pkeys: Don't update SPRN_AMR when in kernel mode.") Reported-by: Zorro Lang <[email protected]> Signed-off-by: Aneesh Kumar K.V <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]

[ Upstream commit b1b8eb1 ] The previous fix left another warning in randconfig builds: WARNING: unmet direct dependencies detected for SND_SOC_QDSP6 Depends on [n]: SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && SND_SOC_QCOM [=y] && QCOM_APR [=y] && COMMON_CLK [=n] Selected by [y]: - SND_SOC_MSM8996 [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && SND_SOC_QCOM [=y] && QCOM_APR [=y] Add one more dependency for this one. Fixes: 2bc8831 ("ASoC: qcom: fix SDM845 & QDSP6 dependencies more") Signed-off-by: Arnd Bergmann <[email protected]> Reviewed-by: Srinivas Kandagatla <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 4a9d81c ] If the elem is deleted during be iterated on it, the iteration process will fall into an endless loop. kernel: NMI watchdog: BUG: soft lockup - CPU#4 stuck for 22s! [nfsd:17137] PID: 17137 TASK: ffff8818d93c0000 CPU: 4 COMMAND: "nfsd" [exception RIP: __state_in_grace+76] RIP: ffffffffc00e817c RSP: ffff8818d3aefc98 RFLAGS: 00000246 RAX: ffff881dc0c38298 RBX: ffffffff81b03580 RCX: ffff881dc02c9f50 RDX: ffff881e3fce8500 RSI: 0000000000000001 RDI: ffffffff81b03580 RBP: ffff8818d3aefca0 R8: 0000000000000020 R9: ffff8818d3aefd40 R10: ffff88017fc03800 R11: ffff8818e83933c0 R12: ffff8818d3aefd40 R13: 0000000000000000 R14: ffff8818e8391068 R15: ffff8818fa6e4000 CS: 0010 SS: 0018 #0 [ffff8818d3aefc98] opens_in_grace at ffffffffc00e81e3 [grace] gregkh#1 [ffff8818d3aefca8] nfs4_preprocess_stateid_op at ffffffffc02a3e6c [nfsd] gregkh#2 [ffff8818d3aefd18] nfsd4_write at ffffffffc028ed5b [nfsd] gregkh#3 [ffff8818d3aefd80] nfsd4_proc_compound at ffffffffc0290a0d [nfsd] gregkh#4 [ffff8818d3aefdd0] nfsd_dispatch at ffffffffc027b800 [nfsd] gregkh#5 [ffff8818d3aefe08] svc_process_common at ffffffffc02017f3 [sunrpc] gregkh#6 [ffff8818d3aefe70] svc_process at ffffffffc0201ce3 [sunrpc] gregkh#7 [ffff8818d3aefe98] nfsd at ffffffffc027b117 [nfsd] gregkh#8 [ffff8818d3aefec8] kthread at ffffffff810b88c1 gregkh#9 [ffff8818d3aeff50] ret_from_fork at ffffffff816d1607 The troublemake elem: crash> lock_manager ffff881dc0c38298 struct lock_manager { list = { next = 0xffff881dc0c38298, prev = 0xffff881dc0c38298 }, block_opens = false } Fixes: c87fb4a ("lockd: NLM grace period shouldn't block NFSv4 opens") Signed-off-by: Cheng Lin <[email protected]> Signed-off-by: Yi Wang <[email protected]> Signed-off-by: Chuck Lever <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit d9e4498 ] Like other tunneling interfaces, the bareudp doesn't need TXLOCK. So, It is good to set the NETIF_F_LLTX flag to improve performance and to avoid lockdep's false-positive warning. Test commands: ip netns add A ip netns add B ip link add veth0 netns A type veth peer name veth1 netns B ip netns exec A ip link set veth0 up ip netns exec A ip a a 10.0.0.1/24 dev veth0 ip netns exec B ip link set veth1 up ip netns exec B ip a a 10.0.0.2/24 dev veth1 for i in {2..1} do let A=$i-1 ip netns exec A ip link add bareudp$i type bareudp \ dstport $i ethertype ip ip netns exec A ip link set bareudp$i up ip netns exec A ip a a 10.0.$i.1/24 dev bareudp$i ip netns exec A ip r a 10.0.$i.2 encap ip src 10.0.$A.1 \ dst 10.0.$A.2 via 10.0.$i.2 dev bareudp$i ip netns exec B ip link add bareudp$i type bareudp \ dstport $i ethertype ip ip netns exec B ip link set bareudp$i up ip netns exec B ip a a 10.0.$i.2/24 dev bareudp$i ip netns exec B ip r a 10.0.$i.1 encap ip src 10.0.$A.2 \ dst 10.0.$A.1 via 10.0.$i.1 dev bareudp$i done ip netns exec A ping 10.0.2.2 Splat looks like: [ 96.992803][ T822] ============================================ [ 96.993954][ T822] WARNING: possible recursive locking detected [ 96.995102][ T822] 5.10.0+ #819 Not tainted [ 96.995927][ T822] -------------------------------------------- [ 96.997091][ T822] ping/822 is trying to acquire lock: [ 96.998083][ T822] ffff88810f753898 (_xmit_NONE#2){+.-.}-{2:2}, at: __dev_queue_xmit+0x1f52/0x2960 [ 96.999813][ T822] [ 96.999813][ T822] but task is already holding lock: [ 97.001192][ T822] ffff88810c385498 (_xmit_NONE#2){+.-.}-{2:2}, at: __dev_queue_xmit+0x1f52/0x2960 [ 97.002908][ T822] [ 97.002908][ T822] other info that might help us debug this: [ 97.004401][ T822] Possible unsafe locking scenario: [ 97.004401][ T822] [ 97.005784][ T822] CPU0 [ 97.006407][ T822] ---- [ 97.007010][ T822] lock(_xmit_NONE#2); [ 97.007779][ T822] lock(_xmit_NONE#2); [ 97.008550][ T822] [ 97.008550][ T822] *** DEADLOCK *** [ 97.008550][ T822] [ 97.010057][ T822] May be due to missing lock nesting notation [ 97.010057][ T822] [ 97.011594][ T822] 7 locks held by ping/822: [ 97.012426][ T822] #0: ffff888109a144f0 (sk_lock-AF_INET){+.+.}-{0:0}, at: raw_sendmsg+0x12f7/0x2b00 [ 97.014191][ T822] gregkh#1: ffffffffbce2f5a0 (rcu_read_lock_bh){....}-{1:2}, at: ip_finish_output2+0x249/0x2020 [ 97.016045][ T822] gregkh#2: ffffffffbce2f5a0 (rcu_read_lock_bh){....}-{1:2}, at: __dev_queue_xmit+0x1fd/0x2960 [ 97.017897][ T822] gregkh#3: ffff88810c385498 (_xmit_NONE#2){+.-.}-{2:2}, at: __dev_queue_xmit+0x1f52/0x2960 [ 97.019684][ T822] gregkh#4: ffffffffbce2f600 (rcu_read_lock){....}-{1:2}, at: bareudp_xmit+0x31b/0x3690 [bareudp] [ 97.021573][ T822] gregkh#5: ffffffffbce2f5a0 (rcu_read_lock_bh){....}-{1:2}, at: ip_finish_output2+0x249/0x2020 [ 97.023424][ T822] gregkh#6: ffffffffbce2f5a0 (rcu_read_lock_bh){....}-{1:2}, at: __dev_queue_xmit+0x1fd/0x2960 [ 97.025259][ T822] [ 97.025259][ T822] stack backtrace: [ 97.026349][ T822] CPU: 3 PID: 822 Comm: ping Not tainted 5.10.0+ #819 [ 97.027609][ T822] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 [ 97.029407][ T822] Call Trace: [ 97.030015][ T822] dump_stack+0x99/0xcb [ 97.030783][ T822] __lock_acquire.cold.77+0x149/0x3a9 [ 97.031773][ T822] ? stack_trace_save+0x81/0xa0 [ 97.032661][ T822] ? register_lock_class+0x1910/0x1910 [ 97.033673][ T822] ? register_lock_class+0x1910/0x1910 [ 97.034679][ T822] ? rcu_read_lock_sched_held+0x91/0xc0 [ 97.035697][ T822] ? rcu_read_lock_bh_held+0xa0/0xa0 [ 97.036690][ T822] lock_acquire+0x1b2/0x730 [ 97.037515][ T822] ? __dev_queue_xmit+0x1f52/0x2960 [ 97.038466][ T822] ? check_flags+0x50/0x50 [ 97.039277][ T822] ? netif_skb_features+0x296/0x9c0 [ 97.040226][ T822] ? validate_xmit_skb+0x29/0xb10 [ 97.041151][ T822] _raw_spin_lock+0x30/0x70 [ 97.041977][ T822] ? __dev_queue_xmit+0x1f52/0x2960 [ 97.042927][ T822] __dev_queue_xmit+0x1f52/0x2960 [ 97.043852][ T822] ? netdev_core_pick_tx+0x290/0x290 [ 97.044824][ T822] ? mark_held_locks+0xb7/0x120 [ 97.045712][ T822] ? lockdep_hardirqs_on_prepare+0x12c/0x3e0 [ 97.046824][ T822] ? __local_bh_enable_ip+0xa5/0xf0 [ 97.047771][ T822] ? ___neigh_create+0x12a8/0x1eb0 [ 97.048710][ T822] ? trace_hardirqs_on+0x41/0x120 [ 97.049626][ T822] ? ___neigh_create+0x12a8/0x1eb0 [ 97.050556][ T822] ? __local_bh_enable_ip+0xa5/0xf0 [ 97.051509][ T822] ? ___neigh_create+0x12a8/0x1eb0 [ 97.052443][ T822] ? check_chain_key+0x244/0x5f0 [ 97.053352][ T822] ? rcu_read_lock_bh_held+0x56/0xa0 [ 97.054317][ T822] ? ip_finish_output2+0x6ea/0x2020 [ 97.055263][ T822] ? pneigh_lookup+0x410/0x410 [ 97.056135][ T822] ip_finish_output2+0x6ea/0x2020 [ ... ] Acked-by: Guillaume Nault <[email protected]> Fixes: 571912c ("net: UDP tunnel encapsulation module for tunnelling different protocols like MPLS, IP, NSH etc.") Signed-off-by: Taehee Yoo <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 3a21777 upstream. We had kernel panic, it is caused by unload module and last close confirmation. call trace: [1196029.743127] free_sess+0x15/0x50 [rtrs_client] [1196029.743128] rtrs_clt_close+0x4c/0x70 [rtrs_client] [1196029.743129] ? rnbd_clt_unmap_device+0x1b0/0x1b0 [rnbd_client] [1196029.743130] close_rtrs+0x25/0x50 [rnbd_client] [1196029.743131] rnbd_client_exit+0x93/0xb99 [rnbd_client] [1196029.743132] __x64_sys_delete_module+0x190/0x260 And in the crashdump confirmation kworker is also running. PID: 6943 TASK: ffff9e2ac8098000 CPU: 4 COMMAND: "kworker/4:2" #0 [ffffb206cf337c30] __schedule at ffffffff9f93f891 gregkh#1 [ffffb206cf337cc8] schedule at ffffffff9f93fe98 gregkh#2 [ffffb206cf337cd0] schedule_timeout at ffffffff9f943938 gregkh#3 [ffffb206cf337d50] wait_for_completion at ffffffff9f9410a7 gregkh#4 [ffffb206cf337da0] __flush_work at ffffffff9f08ce0e gregkh#5 [ffffb206cf337e20] rtrs_clt_close_conns at ffffffffc0d5f668 [rtrs_client] gregkh#6 [ffffb206cf337e48] rtrs_clt_close at ffffffffc0d5f801 [rtrs_client] gregkh#7 [ffffb206cf337e68] close_rtrs at ffffffffc0d26255 [rnbd_client] gregkh#8 [ffffb206cf337e78] free_sess at ffffffffc0d262ad [rnbd_client] gregkh#9 [ffffb206cf337e88] rnbd_clt_put_dev at ffffffffc0d266a7 [rnbd_client] The problem is both code path try to close same session, which lead to panic. To fix it, just skip the sess if the refcount already drop to 0. Fixes: f7a7a5c ("block/rnbd: client: main functionality") Signed-off-by: Jack Wang <[email protected]> Reviewed-by: Gioh Kim <[email protected]> Signed-off-by: Jens Axboe <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit c312446 ] The mpath disk node takes a reference on the request mpath request queue when adding live path to the mpath gendisk. However if we connected to an inaccessible path device_add_disk is not called, so if we disconnect and remove the mpath gendisk we endup putting an reference on the request queue that was never taken [1]. Fix that to check if we ever added a live path (using NVME_NS_HEAD_HAS_DISK flag) and if not, clear the disk->queue reference. [1]: ------------[ cut here ]------------ refcount_t: underflow; use-after-free. WARNING: CPU: 1 PID: 1372 at lib/refcount.c:28 refcount_warn_saturate+0xa6/0xf0 CPU: 1 PID: 1372 Comm: nvme Tainted: G O 5.7.0-rc2+ gregkh#3 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-1ubuntu1 04/01/2014 RIP: 0010:refcount_warn_saturate+0xa6/0xf0 RSP: 0018:ffffb29e8053bdc0 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff8b7a2f4fc060 RCX: 0000000000000007 RDX: 0000000000000007 RSI: 0000000000000092 RDI: ffff8b7a3ec99980 RBP: ffff8b7a2f4fc000 R08: 00000000000002e1 R09: 0000000000000004 R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000 R13: fffffffffffffff2 R14: ffffb29e8053bf08 R15: ffff8b7a320e2da0 FS: 00007f135d4ca800(0000) GS:ffff8b7a3ec80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005651178c0c30 CR3: 000000003b650005 CR4: 0000000000360ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: disk_release+0xa2/0xc0 device_release+0x28/0x80 kobject_put+0xa5/0x1b0 nvme_put_ns_head+0x26/0x70 [nvme_core] nvme_put_ns+0x30/0x60 [nvme_core] nvme_remove_namespaces+0x9b/0xe0 [nvme_core] nvme_do_delete_ctrl+0x43/0x5c [nvme_core] nvme_sysfs_delete.cold+0x8/0xd [nvme_core] kernfs_fop_write+0xc1/0x1a0 vfs_write+0xb6/0x1a0 ksys_write+0x5f/0xe0 do_syscall_64+0x52/0x1a0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Reported-by: Anton Eidelman <[email protected]> Tested-by: Anton Eidelman <[email protected]> Signed-off-by: Sagi Grimberg <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

commit 311eab8 upstream. devm_gpiod_get_index() doesn't return NULL but -ENOENT when the requested GPIO doesn't exist, leading to the following messages: [ 2.742468] gpiod_direction_input: invalid GPIO (errorpointer) [ 2.748147] can't set direction for gpio gregkh#2: -2 [ 2.753081] gpiod_direction_input: invalid GPIO (errorpointer) [ 2.758724] can't set direction for gpio gregkh#3: -2 [ 2.763666] gpiod_direction_output: invalid GPIO (errorpointer) [ 2.769394] can't set direction for gpio gregkh#4: -2 [ 2.774341] gpiod_direction_input: invalid GPIO (errorpointer) [ 2.779981] can't set direction for gpio gregkh#5: -2 [ 2.784545] ff000a20.serial: ttyCPM1 at MMIO 0xfff00a20 (irq = 39, base_baud = 8250000) is a CPM UART Use devm_gpiod_get_index_optional() instead. At the same time, handle the error case and properly exit with an error. Fixes: 97cbaf2 ("tty: serial: cpm_uart: Convert to use GPIO descriptors") Cc: [email protected] Cc: Linus Walleij <[email protected]> Signed-off-by: Christophe Leroy <[email protected]> Reviewed-by: Linus Walleij <[email protected]> Link: https://lore.kernel.org/r/694a25fdce548c5ee8b060ef6a4b02746b8f25c0.1591986307.git.christophe.leroy@csgroup.eu Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit c4c0bdc ] Currently, if a bpf program has more than one subprograms, each program will be jitted separately. For programs with bpf-to-bpf calls the prog->aux->num_exentries is not setup properly. For example, with bpf_iter_netlink.c modified to force one function to be not inlined and with CONFIG_BPF_JIT_ALWAYS_ON the following error is seen: $ ./test_progs -n 3/3 ... libbpf: failed to load program 'iter/netlink' libbpf: failed to load object 'bpf_iter_netlink' libbpf: failed to load BPF skeleton 'bpf_iter_netlink': -4007 test_netlink:FAIL:bpf_iter_netlink__open_and_load skeleton open_and_load failed gregkh#3/3 netlink:FAIL The dmesg shows the following errors: ex gen bug which is triggered by the following code in arch/x86/net/bpf_jit_comp.c: if (excnt >= bpf_prog->aux->num_exentries) { pr_err("ex gen bug\n"); return -EFAULT; } This patch fixes the issue by computing proper num_exentries for each subprogram before calling JIT. Signed-off-by: Yonghong Song <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

commit 0bd0db4 upstream. The `INSN_CONFIG` comedi instruction with sub-instruction code `INSN_CONFIG_DIGITAL_TRIG` includes a base channel in `data[3]`. This is used as a right shift amount for other bitmask values without being checked. Shift amounts greater than or equal to 32 will result in undefined behavior. Add code to deal with this. Fixes: 33cdce6 ("staging: comedi: addi_apci_1032: conform to new INSN_CONFIG_DIGITAL_TRIG") Cc: <[email protected]> gregkh#3.8+ Signed-off-by: Ian Abbott <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 926234f upstream. The `INSN_CONFIG` comedi instruction with sub-instruction code `INSN_CONFIG_DIGITAL_TRIG` includes a base channel in `data[3]`. This is used as a right shift amount for other bitmask values without being checked. Shift amounts greater than or equal to 32 will result in undefined behavior. Add code to deal with this. Fixes: 1e15687 ("staging: comedi: addi_apci_1564: add Change-of-State interrupt subdevice and required functions") Cc: <[email protected]> gregkh#3.17+ Signed-off-by: Ian Abbott <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit be6577a upstream. Stalls are quite frequent with recent kernels. I enabled CONFIG_SOFTLOCKUP_DETECTOR and I caught the following stall: watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [cc1:22803] CPU: 0 PID: 22803 Comm: cc1 Not tainted 5.6.17+ gregkh#3 Hardware name: 9000/800/rp3440 IAOQ[0]: d_alloc_parallel+0x384/0x688 IAOQ[1]: d_alloc_parallel+0x388/0x688 RP(r2): d_alloc_parallel+0x134/0x688 Backtrace: [<000000004036974c>] __lookup_slow+0xa4/0x200 [<0000000040369fc8>] walk_component+0x288/0x458 [<000000004036a9a0>] path_lookupat+0x88/0x198 [<000000004036e748>] filename_lookup+0xa0/0x168 [<000000004036e95c>] user_path_at_empty+0x64/0x80 [<000000004035d93c>] vfs_statx+0x104/0x158 [<000000004035dfcc>] __do_sys_lstat64+0x44/0x80 [<000000004035e5a0>] sys_lstat64+0x20/0x38 [<0000000040180054>] syscall_exit+0x0/0x14 The code was stuck in this loop in d_alloc_parallel: 4037d414: 0e 00 10 dc ldd 0(r16),ret0 4037d418: c7 fc 5f ed bb,< ret0,1f,4037d414 <d_alloc_parallel+0x384> 4037d41c: 08 00 02 40 nop This is the inner loop of bit_spin_lock which is called by hlist_bl_unlock in d_alloc_parallel: static inline void bit_spin_lock(int bitnum, unsigned long *addr) { /* * Assuming the lock is uncontended, this never enters * the body of the outer loop. If it is contended, then * within the inner loop a non-atomic test is used to * busywait with less bus contention for a good time to * attempt to acquire the lock bit. */ preempt_disable(); #if defined(CONFIG_SMP) || defined(CONFIG_DEBUG_SPINLOCK) while (unlikely(test_and_set_bit_lock(bitnum, addr))) { preempt_enable(); do { cpu_relax(); } while (test_bit(bitnum, addr)); preempt_disable(); } #endif __acquire(bitlock); } After consideration, I realized that we must be losing bit unlocks. Then, I noticed that we missed defining atomic64_set_release(). Adding this define fixes the stalls in bit operations. Signed-off-by: Dave Anglin <[email protected]> Cc: [email protected] Signed-off-by: Helge Deller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

Add 3 new tests for tag-based KASAN modes: 1. Check that match-all pointer tag is not assigned randomly. 2. Check that 0xff works as a match-all pointer tag. 3. Check that there are no match-all memory tags. Note, that test #3 causes a significant number (255) of KASAN reports to be printed during execution for the SW_TAGS mode. [[email protected]: export kasan_poison] Link: https://lkml.kernel.org/r/[email protected] [[email protected]: s/EXPORT_SYMBOL_GPL/EXPORT_SYMBOL/, per Andrey] Link: https://linux-review.googlesource.com/id/I78f1375efafa162b37f3abcb2c5bc2f3955dfd8e Link: https://lkml.kernel.org/r/da841a5408e2204bf25f3b23f70540a65844e8a4.1610733117.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <[email protected]> Signed-off-by: Arnd Bergmann <[email protected]> Reviewed-by: Marco Elver <[email protected]> Reviewed-by: Alexander Potapenko <[email protected]> Cc: Andrey Ryabinin <[email protected]> Cc: Branislav Rankov <[email protected]> Cc: Catalin Marinas <[email protected]> Cc: Dmitry Vyukov <[email protected]> Cc: Evgenii Stepanov <[email protected]> Cc: Kevin Brodsky <[email protected]> Cc: Peter Collingbourne <[email protected]> Cc: Vincenzo Frascino <[email protected]> Cc: Will Deacon <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>

[ Upstream commit c5c97ca ] The ubsan reported the following error. It was because sample's raw data missed u32 padding at the end. So it broke the alignment of the array after it. The raw data contains an u32 size prefix so the data size should have an u32 padding after 8-byte aligned data. 27: Sample parsing :util/synthetic-events.c:1539:4: runtime error: store to misaligned address 0x62100006b9bc for type '__u64' (aka 'unsigned long long'), which requires 8 byte alignment 0x62100006b9bc: note: pointer points here 00 00 00 00 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ^ #0 0x561532a9fc96 in perf_event__synthesize_sample util/synthetic-events.c:1539:13 #1 0x5615327f4a4f in do_test tests/sample-parsing.c:284:8 #2 0x5615327f3f50 in test__sample_parsing tests/sample-parsing.c:381:9 #3 0x56153279d3a1 in run_test tests/builtin-test.c:424:9 #4 0x56153279c836 in test_and_print tests/builtin-test.c:454:9 #5 0x56153279b7eb in __cmd_test tests/builtin-test.c:675:4 gregkh#6 0x56153279abf0 in cmd_test tests/builtin-test.c:821:9 gregkh#7 0x56153264e796 in run_builtin perf.c:312:11 gregkh#8 0x56153264cf03 in handle_internal_command perf.c:364:8 gregkh#9 0x56153264e47d in run_argv perf.c:408:2 gregkh#10 0x56153264c9a9 in main perf.c:538:3 gregkh#11 0x7f137ab6fbbc in __libc_start_main (/lib64/libc.so.6+0x38bbc) gregkh#12 0x561532596828 in _start ... SUMMARY: UndefinedBehaviorSanitizer: misaligned-pointer-use util/synthetic-events.c:1539:4 in Fixes: 045f8cd ("perf tests: Add a sample parsing test") Signed-off-by: Namhyung Kim <[email protected]> Acked-by: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit c5c97ca ] The ubsan reported the following error. It was because sample's raw data missed u32 padding at the end. So it broke the alignment of the array after it. The raw data contains an u32 size prefix so the data size should have an u32 padding after 8-byte aligned data. 27: Sample parsing :util/synthetic-events.c:1539:4: runtime error: store to misaligned address 0x62100006b9bc for type '__u64' (aka 'unsigned long long'), which requires 8 byte alignment 0x62100006b9bc: note: pointer points here 00 00 00 00 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ^ #0 0x561532a9fc96 in perf_event__synthesize_sample util/synthetic-events.c:1539:13 #1 0x5615327f4a4f in do_test tests/sample-parsing.c:284:8 #2 0x5615327f3f50 in test__sample_parsing tests/sample-parsing.c:381:9 #3 0x56153279d3a1 in run_test tests/builtin-test.c:424:9 #4 0x56153279c836 in test_and_print tests/builtin-test.c:454:9 #5 0x56153279b7eb in __cmd_test tests/builtin-test.c:675:4 #6 0x56153279abf0 in cmd_test tests/builtin-test.c:821:9 #7 0x56153264e796 in run_builtin perf.c:312:11 #8 0x56153264cf03 in handle_internal_command perf.c:364:8 #9 0x56153264e47d in run_argv perf.c:408:2 #10 0x56153264c9a9 in main perf.c:538:3 #11 0x7f137ab6fbbc in __libc_start_main (/lib64/libc.so.6+0x38bbc) #12 0x561532596828 in _start ... SUMMARY: UndefinedBehaviorSanitizer: misaligned-pointer-use util/synthetic-events.c:1539:4 in Fixes: 045f8cd ("perf tests: Add a sample parsing test") Signed-off-by: Namhyung Kim <[email protected]> Acked-by: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

Calling btrfs_qgroup_reserve_meta_prealloc from btrfs_delayed_inode_reserve_metadata can result in flushing delalloc while holding a transaction and delayed node locks. This is deadlock prone. In the past multiple commits: * ae5e070 ("btrfs: qgroup: don't try to wait flushing if we're already holding a transaction") * 6f23277 ("btrfs: qgroup: don't commit transaction when we already hold the handle") Tried to solve various aspects of this but this was always a whack-a-mole game. Unfortunately those 2 fixes don't solve a deadlock scenario involving btrfs_delayed_node::mutex. Namely, one thread can call btrfs_dirty_inode as a result of reading a file and modifying its atime: PID: 6963 TASK: ffff8c7f3f94c000 CPU: 2 COMMAND: "test" #0 __schedule at ffffffffa529e07d gregkh#1 schedule at ffffffffa529e4ff gregkh#2 schedule_timeout at ffffffffa52a1bdd gregkh#3 wait_for_completion at ffffffffa529eeea <-- sleeps with delayed node mutex held gregkh#4 start_delalloc_inodes at ffffffffc0380db5 gregkh#5 btrfs_start_delalloc_snapshot at ffffffffc0393836 gregkh#6 try_flush_qgroup at ffffffffc03f04b2 gregkh#7 __btrfs_qgroup_reserve_meta at ffffffffc03f5bb6 <-- tries to reserve space and starts delalloc inodes. gregkh#8 btrfs_delayed_update_inode at ffffffffc03e31aa <-- acquires delayed node mutex gregkh#9 btrfs_update_inode at ffffffffc0385ba8 gregkh#10 btrfs_dirty_inode at ffffffffc038627b <-- TRANSACTIION OPENED gregkh#11 touch_atime at ffffffffa4cf0000 gregkh#12 generic_file_read_iter at ffffffffa4c1f123 gregkh#13 new_sync_read at ffffffffa4ccdc8a gregkh#14 vfs_read at ffffffffa4cd0849 gregkh#15 ksys_read at ffffffffa4cd0bd1 gregkh#16 do_syscall_64 at ffffffffa4a052eb gregkh#17 entry_SYSCALL_64_after_hwframe at ffffffffa540008c This will cause an asynchronous work to flush the delalloc inodes to happen which can try to acquire the same delayed_node mutex: PID: 455 TASK: ffff8c8085fa4000 CPU: 5 COMMAND: "kworker/u16:30" #0 __schedule at ffffffffa529e07d gregkh#1 schedule at ffffffffa529e4ff gregkh#2 schedule_preempt_disabled at ffffffffa529e80a gregkh#3 __mutex_lock at ffffffffa529fdcb <-- goes to sleep, never wakes up. gregkh#4 btrfs_delayed_update_inode at ffffffffc03e3143 <-- tries to acquire the mutex gregkh#5 btrfs_update_inode at ffffffffc0385ba8 <-- this is the same inode that pid 6963 is holding gregkh#6 cow_file_range_inline.constprop.78 at ffffffffc0386be7 gregkh#7 cow_file_range at ffffffffc03879c1 gregkh#8 btrfs_run_delalloc_range at ffffffffc038894c gregkh#9 writepage_delalloc at ffffffffc03a3c8f gregkh#10 __extent_writepage at ffffffffc03a4c01 gregkh#11 extent_write_cache_pages at ffffffffc03a500b gregkh#12 extent_writepages at ffffffffc03a6de2 gregkh#13 do_writepages at ffffffffa4c277eb gregkh#14 __filemap_fdatawrite_range at ffffffffa4c1e5bb gregkh#15 btrfs_run_delalloc_work at ffffffffc0380987 <-- starts running delayed nodes gregkh#16 normal_work_helper at ffffffffc03b706c gregkh#17 process_one_work at ffffffffa4aba4e4 gregkh#18 worker_thread at ffffffffa4aba6fd #19 kthread at ffffffffa4ac0a3d #20 ret_from_fork at ffffffffa54001ff To fully address those cases the complete fix is to never issue any flushing while holding the transaction or the delayed node lock. This patch achieves it by calling qgroup_reserve_meta directly which will either succeed without flushing or will fail and return -EDQUOT. In the latter case that return value is going to be propagated to btrfs_dirty_inode which will fallback to start a new transaction. That's fine as the majority of time we expect the inode will have BTRFS_DELAYED_NODE_INODE_DIRTY flag set which will result in directly copying the in-memory state. Fixes: c53e965 ("btrfs: qgroup: try to flush qgroup space when we get -EDQUOT") CC: [email protected] # 5.10+ Reviewed-by: Qu Wenruo <[email protected]> Signed-off-by: Nikolay Borisov <[email protected]> Signed-off-by: David Sterba <[email protected]>

[ Upstream commit c855af2 ] Fix the problem of dev being released twice. ------------[ cut here ]------------ refcount_t: underflow; use-after-free. WARNING: CPU: 75 PID: 15700 at lib/refcount.c:28 refcount_warn_saturate+0xd4/0x150 CPU: 75 PID: 15700 Comm: rmmod Tainted: G E 5.10.0-rc3+ #3 Hardware name: Huawei TaiShan 200 (Model 2280)/BC82AMDDA, BIOS 0.88 07/24/2019 pstate: 40400009 (nZcv daif +PAN -UAO -TCO BTYPE=--) pc : refcount_warn_saturate+0xd4/0x150 lr : refcount_warn_saturate+0xd4/0x150 sp : ffff2028150cbc00 x29: ffff2028150cbc00 x28: ffff2028150121c0 x27: 0000000000000000 x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000003 x23: 0000000000000000 x22: ffff2028150cbc90 x21: ffff2020038a30a8 x20: ffff2028150cbc90 x19: ffff0020cd938020 x18: 0000000000000010 x17: 0000000000000000 x16: 0000000000000000 x15: ffffffffffffffff x14: ffff2028950cb88f x13: ffff2028150cb89d x12: 0000000000000000 x11: 0000000005f5e0ff x10: ffff2028150cb800 x9 : 00000000ffffffd0 x8 : 75203b776f6c6672 x7 : ffff800011a6f7c8 x6 : 0000000000000001 x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000 x2 : ffff202ffe2f9dc0 x1 : ffffa02fecf40000 x0 : 0000000000000026 Call trace: refcount_warn_saturate+0xd4/0x150 devm_drm_dev_init_release+0x50/0x70 devm_action_release+0x20/0x30 release_nodes+0x13c/0x218 devres_release_all+0x80/0x170 device_release_driver_internal+0x128/0x1f0 driver_detach+0x6c/0xe0 bus_remove_driver+0x74/0x100 driver_unregister+0x34/0x60 pci_unregister_driver+0x24/0xd8 hibmc_pci_driver_exit+0x14/0xe858 [hibmc_drm] __arm64_sys_delete_module+0x1fc/0x2d0 el0_svc_common.constprop.3+0xa8/0x188 do_el0_svc+0x80/0xa0 el0_sync_handler+0x8c/0xb0 el0_sync+0x15c/0x180 CPU: 75 PID: 15700 Comm: rmmod Tainted: G E 5.10.0-rc3+ #3 Hardware name: Huawei TaiShan 200 (Model 2280)/BC82AMDDA, BIOS 0.88 07/24/2019 Call trace: dump_backtrace+0x0/0x208 show_stack+0x2c/0x40 dump_stack+0xd8/0x10c __warn+0xac/0x128 report_bug+0xcc/0x180 bug_handler+0x24/0x78 call_break_hook+0x80/0xa0 brk_handler+0x28/0x68 do_debug_exception+0x9c/0x148 el1_sync_handler+0x7c/0x128 el1_sync+0x80/0x100 refcount_warn_saturate+0xd4/0x150 devm_drm_dev_init_release+0x50/0x70 devm_action_release+0x20/0x30 release_nodes+0x13c/0x218 devres_release_all+0x80/0x170 device_release_driver_internal+0x128/0x1f0 driver_detach+0x6c/0xe0 bus_remove_driver+0x74/0x100 driver_unregister+0x34/0x60 pci_unregister_driver+0x24/0xd8 hibmc_pci_driver_exit+0x14/0xe858 [hibmc_drm] __arm64_sys_delete_module+0x1fc/0x2d0 el0_svc_common.constprop.3+0xa8/0x188 do_el0_svc+0x80/0xa0 el0_sync_handler+0x8c/0xb0 el0_sync+0x15c/0x180 ---[ end trace 00718630d6e5ff18 ]--- Signed-off-by: Tian Tao <[email protected]> Acked-by: Thomas Zimmermann <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit d1bc560 ] Add nested locking with I_MUTEX_XATTR subclass to avoid lockdep warning while handling xattr inode on file open syscall at ext4_xattr_inode_iget. Backtrace EXT4-fs (loop0): Ignoring removed oldalloc option ====================================================== WARNING: possible circular locking dependency detected 5.10.0-syzkaller #0 Not tainted ------------------------------------------------------ syz-executor543/2794 is trying to acquire lock: ffff8880215e1a48 (&ea_inode->i_rwsem#7/1){+.+.}-{3:3}, at: inode_lock include/linux/fs.h:782 [inline] ffff8880215e1a48 (&ea_inode->i_rwsem#7/1){+.+.}-{3:3}, at: ext4_xattr_inode_iget+0x42a/0x5c0 fs/ext4/xattr.c:425 but task is already holding lock: ffff8880215e3278 (&ei->i_data_sem/3){++++}-{3:3}, at: ext4_setattr+0x136d/0x19c0 fs/ext4/inode.c:5559 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&ei->i_data_sem/3){++++}-{3:3}: lock_acquire+0x197/0x480 kernel/locking/lockdep.c:5566 down_write+0x93/0x180 kernel/locking/rwsem.c:1564 ext4_update_i_disksize fs/ext4/ext4.h:3267 [inline] ext4_xattr_inode_write fs/ext4/xattr.c:1390 [inline] ext4_xattr_inode_lookup_create fs/ext4/xattr.c:1538 [inline] ext4_xattr_set_entry+0x331a/0x3d80 fs/ext4/xattr.c:1662 ext4_xattr_ibody_set+0x124/0x390 fs/ext4/xattr.c:2228 ext4_xattr_set_handle+0xc27/0x14e0 fs/ext4/xattr.c:2385 ext4_xattr_set+0x219/0x390 fs/ext4/xattr.c:2498 ext4_xattr_user_set+0xc9/0xf0 fs/ext4/xattr_user.c:40 __vfs_setxattr+0x404/0x450 fs/xattr.c:177 __vfs_setxattr_noperm+0x11d/0x4f0 fs/xattr.c:208 __vfs_setxattr_locked+0x1f9/0x210 fs/xattr.c:266 vfs_setxattr+0x112/0x2c0 fs/xattr.c:283 setxattr+0x1db/0x3e0 fs/xattr.c:548 path_setxattr+0x15a/0x240 fs/xattr.c:567 __do_sys_setxattr fs/xattr.c:582 [inline] __se_sys_setxattr fs/xattr.c:578 [inline] __x64_sys_setxattr+0xc5/0xe0 fs/xattr.c:578 do_syscall_64+0x6d/0xa0 arch/x86/entry/common.c:62 entry_SYSCALL_64_after_hwframe+0x61/0xcb -> #0 (&ea_inode->i_rwsem#7/1){+.+.}-{3:3}: check_prev_add kernel/locking/lockdep.c:2988 [inline] check_prevs_add kernel/locking/lockdep.c:3113 [inline] validate_chain+0x1695/0x58f0 kernel/locking/lockdep.c:3729 __lock_acquire+0x12fd/0x20d0 kernel/locking/lockdep.c:4955 lock_acquire+0x197/0x480 kernel/locking/lockdep.c:5566 down_write+0x93/0x180 kernel/locking/rwsem.c:1564 inode_lock include/linux/fs.h:782 [inline] ext4_xattr_inode_iget+0x42a/0x5c0 fs/ext4/xattr.c:425 ext4_xattr_inode_get+0x138/0x410 fs/ext4/xattr.c:485 ext4_xattr_move_to_block fs/ext4/xattr.c:2580 [inline] ext4_xattr_make_inode_space fs/ext4/xattr.c:2682 [inline] ext4_expand_extra_isize_ea+0xe70/0x1bb0 fs/ext4/xattr.c:2774 __ext4_expand_extra_isize+0x304/0x3f0 fs/ext4/inode.c:5898 ext4_try_to_expand_extra_isize fs/ext4/inode.c:5941 [inline] __ext4_mark_inode_dirty+0x591/0x810 fs/ext4/inode.c:6018 ext4_setattr+0x1400/0x19c0 fs/ext4/inode.c:5562 notify_change+0xbb6/0xe60 fs/attr.c:435 do_truncate+0x1de/0x2c0 fs/open.c:64 handle_truncate fs/namei.c:2970 [inline] do_open fs/namei.c:3311 [inline] path_openat+0x29f3/0x3290 fs/namei.c:3425 do_filp_open+0x20b/0x450 fs/namei.c:3452 do_sys_openat2+0x124/0x460 fs/open.c:1207 do_sys_open fs/open.c:1223 [inline] __do_sys_open fs/open.c:1231 [inline] __se_sys_open fs/open.c:1227 [inline] __x64_sys_open+0x221/0x270 fs/open.c:1227 do_syscall_64+0x6d/0xa0 arch/x86/entry/common.c:62 entry_SYSCALL_64_after_hwframe+0x61/0xcb other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&ei->i_data_sem/3); lock(&ea_inode->i_rwsem#7/1); lock(&ei->i_data_sem/3); lock(&ea_inode->i_rwsem#7/1); *** DEADLOCK *** 5 locks held by syz-executor543/2794: #0: ffff888026fbc448 (sb_writers#4){.+.+}-{0:0}, at: mnt_want_write+0x4a/0x2a0 fs/namespace.c:365 #1: ffff8880215e3488 (&sb->s_type->i_mutex_key#7){++++}-{3:3}, at: inode_lock include/linux/fs.h:782 [inline] #1: ffff8880215e3488 (&sb->s_type->i_mutex_key#7){++++}-{3:3}, at: do_truncate+0x1cf/0x2c0 fs/open.c:62 #2: ffff8880215e3310 (&ei->i_mmap_sem){++++}-{3:3}, at: ext4_setattr+0xec4/0x19c0 fs/ext4/inode.c:5519 #3: ffff8880215e3278 (&ei->i_data_sem/3){++++}-{3:3}, at: ext4_setattr+0x136d/0x19c0 fs/ext4/inode.c:5559 #4: ffff8880215e30c8 (&ei->xattr_sem){++++}-{3:3}, at: ext4_write_trylock_xattr fs/ext4/xattr.h:162 [inline] #4: ffff8880215e30c8 (&ei->xattr_sem){++++}-{3:3}, at: ext4_try_to_expand_extra_isize fs/ext4/inode.c:5938 [inline] #4: ffff8880215e30c8 (&ei->xattr_sem){++++}-{3:3}, at: __ext4_mark_inode_dirty+0x4fb/0x810 fs/ext4/inode.c:6018 stack backtrace: CPU: 1 PID: 2794 Comm: syz-executor543 Not tainted 5.10.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x177/0x211 lib/dump_stack.c:118 print_circular_bug+0x146/0x1b0 kernel/locking/lockdep.c:2002 check_noncircular+0x2cc/0x390 kernel/locking/lockdep.c:2123 check_prev_add kernel/locking/lockdep.c:2988 [inline] check_prevs_add kernel/locking/lockdep.c:3113 [inline] validate_chain+0x1695/0x58f0 kernel/locking/lockdep.c:3729 __lock_acquire+0x12fd/0x20d0 kernel/locking/lockdep.c:4955 lock_acquire+0x197/0x480 kernel/locking/lockdep.c:5566 down_write+0x93/0x180 kernel/locking/rwsem.c:1564 inode_lock include/linux/fs.h:782 [inline] ext4_xattr_inode_iget+0x42a/0x5c0 fs/ext4/xattr.c:425 ext4_xattr_inode_get+0x138/0x410 fs/ext4/xattr.c:485 ext4_xattr_move_to_block fs/ext4/xattr.c:2580 [inline] ext4_xattr_make_inode_space fs/ext4/xattr.c:2682 [inline] ext4_expand_extra_isize_ea+0xe70/0x1bb0 fs/ext4/xattr.c:2774 __ext4_expand_extra_isize+0x304/0x3f0 fs/ext4/inode.c:5898 ext4_try_to_expand_extra_isize fs/ext4/inode.c:5941 [inline] __ext4_mark_inode_dirty+0x591/0x810 fs/ext4/inode.c:6018 ext4_setattr+0x1400/0x19c0 fs/ext4/inode.c:5562 notify_change+0xbb6/0xe60 fs/attr.c:435 do_truncate+0x1de/0x2c0 fs/open.c:64 handle_truncate fs/namei.c:2970 [inline] do_open fs/namei.c:3311 [inline] path_openat+0x29f3/0x3290 fs/namei.c:3425 do_filp_open+0x20b/0x450 fs/namei.c:3452 do_sys_openat2+0x124/0x460 fs/open.c:1207 do_sys_open fs/open.c:1223 [inline] __do_sys_open fs/open.c:1231 [inline] __se_sys_open fs/open.c:1227 [inline] __x64_sys_open+0x221/0x270 fs/open.c:1227 do_syscall_64+0x6d/0xa0 arch/x86/entry/common.c:62 entry_SYSCALL_64_after_hwframe+0x61/0xcb RIP: 0033:0x7f0cde4ea229 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 21 18 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffd81d1c978 EFLAGS: 00000246 ORIG_RAX: 0000000000000002 RAX: ffffffffffffffda RBX: 0030656c69662f30 RCX: 00007f0cde4ea229 RDX: 0000000000000089 RSI: 00000000000a0a00 RDI: 00000000200001c0 RBP: 2f30656c69662f2e R08: 0000000000208000 R09: 0000000000208000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007ffd81d1c9c0 R13: 00007ffd81d1ca00 R14: 0000000000080000 R15: 0000000000000003 EXT4-fs error (device loop0): ext4_expand_extra_isize_ea:2730: inode #13: comm syz-executor543: corrupted in-inode xattr Signed-off-by: Wojciech Gładysz <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Theodore Ts'o <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

commit cf96b8e upstream. ASan reports a memory leak caused by evlist not being deleted on exit in perf-report, perf-script and perf-data. The problem is caused by evlist->session not being deleted, which is allocated in perf_session__read_header, called in perf_session__new if perf_data is in read mode. In case of write mode, the session->evlist is filled by the caller. This patch solves the problem by calling evlist__delete in perf_session__delete if perf_data is in read mode. Changes in v2: - call evlist__delete from within perf_session__delete v1: https://lore.kernel.org/lkml/[email protected]/ ASan report follows: $ ./perf script report flamegraph ================================================================= ==227640==ERROR: LeakSanitizer: detected memory leaks <SNIP unrelated> Indirect leak of 2704 byte(s) in 1 object(s) allocated from: #0 0x4f4137 in calloc (/home/user/linux/tools/perf/perf+0x4f4137) gregkh#1 0xbe3d56 in zalloc /home/user/linux/tools/lib/perf/../../lib/zalloc.c:8:9 gregkh#2 0x7f999e in evlist__new /home/user/linux/tools/perf/util/evlist.c:77:26 gregkh#3 0x8ad938 in perf_session__read_header /home/user/linux/tools/perf/util/header.c:3797:20 gregkh#4 0x8ec714 in perf_session__open /home/user/linux/tools/perf/util/session.c:109:6 gregkh#5 0x8ebe83 in perf_session__new /home/user/linux/tools/perf/util/session.c:213:10 gregkh#6 0x60c6de in cmd_script /home/user/linux/tools/perf/builtin-script.c:3856:12 gregkh#7 0x7b2930 in run_builtin /home/user/linux/tools/perf/perf.c:313:11 gregkh#8 0x7b120f in handle_internal_command /home/user/linux/tools/perf/perf.c:365:8 gregkh#9 0x7b2493 in run_argv /home/user/linux/tools/perf/perf.c:409:2 gregkh#10 0x7b0c89 in main /home/user/linux/tools/perf/perf.c:539:3 gregkh#11 0x7f5260654b74 (/lib64/libc.so.6+0x27b74) Indirect leak of 568 byte(s) in 1 object(s) allocated from: #0 0x4f4137 in calloc (/home/user/linux/tools/perf/perf+0x4f4137) gregkh#1 0xbe3d56 in zalloc /home/user/linux/tools/lib/perf/../../lib/zalloc.c:8:9 gregkh#2 0x80ce88 in evsel__new_idx /home/user/linux/tools/perf/util/evsel.c:268:24 gregkh#3 0x8aed93 in evsel__new /home/user/linux/tools/perf/util/evsel.h:210:9 gregkh#4 0x8ae07e in perf_session__read_header /home/user/linux/tools/perf/util/header.c:3853:11 gregkh#5 0x8ec714 in perf_session__open /home/user/linux/tools/perf/util/session.c:109:6 gregkh#6 0x8ebe83 in perf_session__new /home/user/linux/tools/perf/util/session.c:213:10 gregkh#7 0x60c6de in cmd_script /home/user/linux/tools/perf/builtin-script.c:3856:12 gregkh#8 0x7b2930 in run_builtin /home/user/linux/tools/perf/perf.c:313:11 gregkh#9 0x7b120f in handle_internal_command /home/user/linux/tools/perf/perf.c:365:8 gregkh#10 0x7b2493 in run_argv /home/user/linux/tools/perf/perf.c:409:2 gregkh#11 0x7b0c89 in main /home/user/linux/tools/perf/perf.c:539:3 gregkh#12 0x7f5260654b74 (/lib64/libc.so.6+0x27b74) Indirect leak of 264 byte(s) in 1 object(s) allocated from: #0 0x4f4137 in calloc (/home/user/linux/tools/perf/perf+0x4f4137) gregkh#1 0xbe3d56 in zalloc /home/user/linux/tools/lib/perf/../../lib/zalloc.c:8:9 gregkh#2 0xbe3e70 in xyarray__new /home/user/linux/tools/lib/perf/xyarray.c:10:23 gregkh#3 0xbd7754 in perf_evsel__alloc_id /home/user/linux/tools/lib/perf/evsel.c:361:21 gregkh#4 0x8ae201 in perf_session__read_header /home/user/linux/tools/perf/util/header.c:3871:7 gregkh#5 0x8ec714 in perf_session__open /home/user/linux/tools/perf/util/session.c:109:6 gregkh#6 0x8ebe83 in perf_session__new /home/user/linux/tools/perf/util/session.c:213:10 gregkh#7 0x60c6de in cmd_script /home/user/linux/tools/perf/builtin-script.c:3856:12 gregkh#8 0x7b2930 in run_builtin /home/user/linux/tools/perf/perf.c:313:11 gregkh#9 0x7b120f in handle_internal_command /home/user/linux/tools/perf/perf.c:365:8 gregkh#10 0x7b2493 in run_argv /home/user/linux/tools/perf/perf.c:409:2 gregkh#11 0x7b0c89 in main /home/user/linux/tools/perf/perf.c:539:3 gregkh#12 0x7f5260654b74 (/lib64/libc.so.6+0x27b74) Indirect leak of 32 byte(s) in 1 object(s) allocated from: #0 0x4f4137 in calloc (/home/user/linux/tools/perf/perf+0x4f4137) gregkh#1 0xbe3d56 in zalloc /home/user/linux/tools/lib/perf/../../lib/zalloc.c:8:9 gregkh#2 0xbd77e0 in perf_evsel__alloc_id /home/user/linux/tools/lib/perf/evsel.c:365:14 gregkh#3 0x8ae201 in perf_session__read_header /home/user/linux/tools/perf/util/header.c:3871:7 gregkh#4 0x8ec714 in perf_session__open /home/user/linux/tools/perf/util/session.c:109:6 gregkh#5 0x8ebe83 in perf_session__new /home/user/linux/tools/perf/util/session.c:213:10 gregkh#6 0x60c6de in cmd_script /home/user/linux/tools/perf/builtin-script.c:3856:12 gregkh#7 0x7b2930 in run_builtin /home/user/linux/tools/perf/perf.c:313:11 gregkh#8 0x7b120f in handle_internal_command /home/user/linux/tools/perf/perf.c:365:8 gregkh#9 0x7b2493 in run_argv /home/user/linux/tools/perf/perf.c:409:2 gregkh#10 0x7b0c89 in main /home/user/linux/tools/perf/perf.c:539:3 gregkh#11 0x7f5260654b74 (/lib64/libc.so.6+0x27b74) Indirect leak of 7 byte(s) in 1 object(s) allocated from: #0 0x4b8207 in strdup (/home/user/linux/tools/perf/perf+0x4b8207) gregkh#1 0x8b4459 in evlist__set_event_name /home/user/linux/tools/perf/util/header.c:2292:16 gregkh#2 0x89d862 in process_event_desc /home/user/linux/tools/perf/util/header.c:2313:3 gregkh#3 0x8af319 in perf_file_section__process /home/user/linux/tools/perf/util/header.c:3651:9 gregkh#4 0x8aa6e9 in perf_header__process_sections /home/user/linux/tools/perf/util/header.c:3427:9 gregkh#5 0x8ae3e7 in perf_session__read_header /home/user/linux/tools/perf/util/header.c:3886:2 gregkh#6 0x8ec714 in perf_session__open /home/user/linux/tools/perf/util/session.c:109:6 gregkh#7 0x8ebe83 in perf_session__new /home/user/linux/tools/perf/util/session.c:213:10 gregkh#8 0x60c6de in cmd_script /home/user/linux/tools/perf/builtin-script.c:3856:12 gregkh#9 0x7b2930 in run_builtin /home/user/linux/tools/perf/perf.c:313:11 gregkh#10 0x7b120f in handle_internal_command /home/user/linux/tools/perf/perf.c:365:8 gregkh#11 0x7b2493 in run_argv /home/user/linux/tools/perf/perf.c:409:2 gregkh#12 0x7b0c89 in main /home/user/linux/tools/perf/perf.c:539:3 gregkh#13 0x7f5260654b74 (/lib64/libc.so.6+0x27b74) SUMMARY: AddressSanitizer: 3728 byte(s) leaked in 7 allocation(s). Signed-off-by: Riccardo Mancini <[email protected]> Acked-by: Ian Rogers <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Kan Liang <[email protected]> Cc: Leo Yan <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Cc: [email protected] # 5.10.228 Signed-off-by: Shuai Xue <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

nx842_remove() call of_reconfig_notifier_unregister while holding the devdata_spinlock. This could lead to an invalid wait context error during kexec reboot, as of_reconfig_notifier_unregister tries to acquire a read-write semaphore (check logs) while holding a spinlock. Move the of_reconfig_notifier_unregister() call before acquiring the spinlock to prevent this race condition invalid wait contexts during system shutdown or kexec operations. Log: [ BUG: Invalid wait context ] 6.11.0-test2-10547-g684a64bf32b6-dirty #79 Not tainted ----------------------------- kexec/61926 is trying to lock: c000000002d8b590 ((of_reconfig_chain).rwsem){++++}-{4:4}, at: blocking_notifier_chain_unregister+0x44/0xa0 other info that might help us debug this: context-{5:5} 4 locks held by kexec/61926: #0: c000000002926c70 (system_transition_mutex){+.+.}-{4:4}, at: __do_sys_reboot+0xf8/0x2e0 gregkh#1: c00000000291af30 (&dev->mutex){....}-{4:4}, at: device_shutdown+0x160/0x310 gregkh#2: c000000051011938 (&dev->mutex){....}-{4:4}, at: device_shutdown+0x174/0x310 gregkh#3: c000000002d88070 (devdata_mutex){....}-{3:3}, at: nx842_remove+0xac/0x1bc stack backtrace: CPU: 2 UID: 0 PID: 61926 Comm: kexec Not tainted 6.11.0-test2-10547-g684a64bf32b6-dirty #79 Hardware name: IBM,9080-HEX POWER10 (architected) 0x800200 0xf000006 of:IBM,FW1060.00 (NH1060_012) hv:phyp pSeries Call Trace: [c0000000bb577400] [c000000001239704] dump_stack_lvl+0xc8/0x130 (unreliable) [c0000000bb577440] [c000000000248398] __lock_acquire+0xb68/0xf00 [c0000000bb577550] [c000000000248820] lock_acquire.part.0+0xf0/0x2a0 [c0000000bb577670] [c00000000127faa0] down_write+0x70/0x1e0 [c0000000bb5776b0] [c0000000001acea4] blocking_notifier_chain_unregister+0x44/0xa0 [c0000000bb5776e0] [c000000000e2312c] of_reconfig_notifier_unregister+0x2c/0x40 [c0000000bb577700] [c000000000ded24c] nx842_remove+0x148/0x1bc [c0000000bb577790] [c00000000011a114] vio_bus_remove+0x54/0xc0 [c0000000bb5777c0] [c000000000c1a44c] device_shutdown+0x20c/0x310 [c0000000bb577850] [c0000000001b0ab4] kernel_restart_prepare+0x54/0x70 [c0000000bb577870] [c000000000308718] kernel_kexec+0xa8/0x110 [c0000000bb5778e0] [c0000000001b1144] __do_sys_reboot+0x214/0x2e0 [c0000000bb577a40] [c000000000032f98] system_call_exception+0x148/0x310 [c0000000bb577e50] [c00000000000cedc] system_call_vectored_common+0x15c/0x2ec --- interrupt: 3000 at 0x7fffa07e7df8 NIP: 00007fffa07e7df8 LR: 00007fffa07e7df8 CTR: 0000000000000000 REGS: c0000000bb577e80 TRAP: 3000 Not tainted (6.11.0-test2-10547-g684a64bf32b6-dirty) MSR: 800000000280f033 CR: 48022484 XER: 00000000 IRQMASK: 0 GPR00: 0000000000000058 00007ffff961f1e0 00007fffa08f7100 fffffffffee1dead GPR04: 0000000028121969 0000000045584543 0000000000000000 0000000000000003 GPR08: 0000000000000003 0000000000000000 0000000000000000 0000000000000000 GPR12: 0000000000000000 00007fffa0a9b360 ffffffffffffffff 0000000000000000 GPR16: 0000000000000001 0000000000000002 0000000000000001 0000000000000001 GPR20: 000000011710f520 0000000000000000 0000000000000000 0000000000000001 GPR24: 0000000129be0480 0000000000000003 0000000000000003 00007ffff961f2b0 GPR28: 00000001170f2d30 00000001170f2d28 00007fffa08f18d0 0000000129be04a0 NIP [00007fffa07e7df8] 0x7fffa07e7df8 LR [00007fffa07e7df8] 0x7fffa07e7df8 --- interrupt: 3000 Suggested-by: Michael Ellerman <[email protected]> Signed-off-by: Vishal Chourasia <[email protected]> Signed-off-by: Herbert Xu <[email protected]>

Ran Xiaokai reports that with a KCSAN-enabled PREEMPT_RT kernel, we can see splats like: | BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48 | in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 0, name: swapper/1 | preempt_count: 10002, expected: 0 | RCU nest depth: 0, expected: 0 | no locks held by swapper/1/0. | irq event stamp: 156674 | hardirqs last enabled at (156673): [<ffffffff81130bd9>] do_idle+0x1f9/0x240 | hardirqs last disabled at (156674): [<ffffffff82254f84>] sysvec_apic_timer_interrupt+0x14/0xc0 | softirqs last enabled at (0): [<ffffffff81099f47>] copy_process+0xfc7/0x4b60 | softirqs last disabled at (0): [<0000000000000000>] 0x0 | Preemption disabled at: | [<ffffffff814a3e2a>] paint_ptr+0x2a/0x90 | CPU: 1 UID: 0 PID: 0 Comm: swapper/1 Not tainted 6.11.0+ gregkh#3 | Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-0-ga698c8995f-prebuilt.qemu.org 04/01/2014 | Call Trace: | <IRQ> | dump_stack_lvl+0x7e/0xc0 | dump_stack+0x1d/0x30 | __might_resched+0x1a2/0x270 | rt_spin_lock+0x68/0x170 | kcsan_skip_report_debugfs+0x43/0xe0 | print_report+0xb5/0x590 | kcsan_report_known_origin+0x1b1/0x1d0 | kcsan_setup_watchpoint+0x348/0x650 | __tsan_unaligned_write1+0x16d/0x1d0 | hrtimer_interrupt+0x3d6/0x430 | __sysvec_apic_timer_interrupt+0xe8/0x3a0 | sysvec_apic_timer_interrupt+0x97/0xc0 | </IRQ> On a detected data race, KCSAN's reporting logic checks if it should filter the report. That list is protected by the report_filterlist_lock *non-raw* spinlock which may sleep on RT kernels. Since KCSAN may report data races in any context, convert it to a raw_spinlock. This requires being careful about when to allocate memory for the filter list itself which can be done via KCSAN's debugfs interface. Concurrent modification of the filter list via debugfs should be rare: the chosen strategy is to optimistically pre-allocate memory before the critical section and discard if unused. Link: https://lore.kernel.org/all/[email protected]/ Reported-by: Ran Xiaokai <[email protected]> Tested-by: Ran Xiaokai <[email protected]> Signed-off-by: Marco Elver <[email protected]>

…dfl() When getting an LLC CPU mask in the default CPU selection policy, scx_select_cpu_dfl(), a pointer to the sched_domain is dereferenced using rcu_read_lock() without holding rcu_read_lock(). Such an unprotected dereference often causes the following warning and can cause an invalid memory access in the worst case. Therefore, protect dereference of a sched_domain pointer using a pair of rcu_read_lock() and unlock(). [ 20.996135] ============================= [ 20.996345] WARNING: suspicious RCU usage [ 20.996563] 6.11.0-virtme gregkh#17 Tainted: G W [ 20.996576] ----------------------------- [ 20.996576] kernel/sched/ext.c:3323 suspicious rcu_dereference_check() usage! [ 20.996576] [ 20.996576] other info that might help us debug this: [ 20.996576] [ 20.996576] [ 20.996576] rcu_scheduler_active = 2, debug_locks = 1 [ 20.996576] 4 locks held by kworker/8:1/140: [ 20.996576] #0: ffff8b18c00dd348 ((wq_completion)pm){+.+.}-{0:0}, at: process_one_work+0x4a0/0x590 [ 20.996576] gregkh#1: ffffb3da01f67e58 ((work_completion)(&dev->power.work)){+.+.}-{0:0}, at: process_one_work+0x1ba/0x590 [ 20.996576] gregkh#2: ffffffffa316f9f0 (&rcu_state.gp_wq){..-.}-{2:2}, at: swake_up_one+0x15/0x60 [ 20.996576] gregkh#3: ffff8b1880398a60 (&p->pi_lock){-.-.}-{2:2}, at: try_to_wake_up+0x59/0x7d0 [ 20.996576] [ 20.996576] stack backtrace: [ 20.996576] CPU: 8 UID: 0 PID: 140 Comm: kworker/8:1 Tainted: G W 6.11.0-virtme gregkh#17 [ 20.996576] Tainted: [W]=WARN [ 20.996576] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014 [ 20.996576] Workqueue: pm pm_runtime_work [ 20.996576] Sched_ext: simple (disabling+all), task: runnable_at=-6ms [ 20.996576] Call Trace: [ 20.996576] <IRQ> [ 20.996576] dump_stack_lvl+0x6f/0xb0 [ 20.996576] lockdep_rcu_suspicious.cold+0x4e/0x96 [ 20.996576] scx_select_cpu_dfl+0x234/0x260 [ 20.996576] select_task_rq_scx+0xfb/0x190 [ 20.996576] select_task_rq+0x47/0x110 [ 20.996576] try_to_wake_up+0x110/0x7d0 [ 20.996576] swake_up_one+0x39/0x60 [ 20.996576] rcu_core+0xb08/0xe50 [ 20.996576] ? srso_alias_return_thunk+0x5/0xfbef5 [ 20.996576] ? mark_held_locks+0x40/0x70 [ 20.996576] handle_softirqs+0xd3/0x410 [ 20.996576] irq_exit_rcu+0x78/0xa0 [ 20.996576] sysvec_apic_timer_interrupt+0x73/0x80 [ 20.996576] </IRQ> [ 20.996576] <TASK> [ 20.996576] asm_sysvec_apic_timer_interrupt+0x1a/0x20 [ 20.996576] RIP: 0010:_raw_spin_unlock_irqrestore+0x36/0x70 [ 20.996576] Code: f5 53 48 8b 74 24 10 48 89 fb 48 83 c7 18 e8 11 b4 36 ff 48 89 df e8 99 0d 37 ff f7 c5 00 02 00 00 75 17 9c 58 f6 c4 02 75 2b <65> ff 0d 5b 55 3c 5e 74 16 5b 5d e9 95 8e 28 00 e8 a5 ee 44 ff 9c [ 20.996576] RSP: 0018:ffffb3da01f67d20 EFLAGS: 00000246 [ 20.996576] RAX: 0000000000000002 RBX: ffffffffa4640220 RCX: 0000000000000040 [ 20.996576] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffffa1c7b27b [ 20.996576] RBP: 0000000000000246 R08: 0000000000000001 R09: 0000000000000000 [ 20.996576] R10: 0000000000000001 R11: 000000000000021c R12: 0000000000000246 [ 20.996576] R13: ffff8b1881363958 R14: 0000000000000000 R15: ffff8b1881363800 [ 20.996576] ? _raw_spin_unlock_irqrestore+0x4b/0x70 [ 20.996576] serial_port_runtime_resume+0xd4/0x1a0 [ 20.996576] ? __pfx_serial_port_runtime_resume+0x10/0x10 [ 20.996576] __rpm_callback+0x44/0x170 [ 20.996576] ? __pfx_serial_port_runtime_resume+0x10/0x10 [ 20.996576] rpm_callback+0x55/0x60 [ 20.996576] ? __pfx_serial_port_runtime_resume+0x10/0x10 [ 20.996576] rpm_resume+0x582/0x7b0 [ 20.996576] pm_runtime_work+0x7c/0xb0 [ 20.996576] process_one_work+0x1fb/0x590 [ 20.996576] worker_thread+0x18e/0x350 [ 20.996576] ? __pfx_worker_thread+0x10/0x10 [ 20.996576] kthread+0xe2/0x110 [ 20.996576] ? __pfx_kthread+0x10/0x10 [ 20.996576] ret_from_fork+0x34/0x50 [ 20.996576] ? __pfx_kthread+0x10/0x10 [ 20.996576] ret_from_fork_asm+0x1a/0x30 [ 20.996576] </TASK> [ 21.056592] sched_ext: BPF scheduler "simple" disabled (unregistered from user space) Signed-off-by: Changwoo Min <[email protected]> Acked-by: Andrea Righi <[email protected]> Signed-off-by: Tejun Heo <[email protected]>

Lockdep gives a false positive splat as it can't distinguish the lock which is taken by different IRQ descriptors from different IRQ chips that are organized in a way of a hierarchy: ====================================================== WARNING: possible circular locking dependency detected 6.12.0-rc5-next-20241101-00148-g9fabf8160b53 #562 Tainted: G W ------------------------------------------------------ modprobe/141 is trying to acquire lock: ffff899446947868 (intel_soc_pmic_bxtwc:502:(&bxtwc_regmap_config)->lock){+.+.}-{4:4}, at: regmap_update_bits_base+0x33/0x90 but task is already holding lock: ffff899446947c68 (&d->lock){+.+.}-{4:4}, at: __setup_irq+0x682/0x790 which lock already depends on the new lock. -> gregkh#3 (&d->lock){+.+.}-{4:4}: -> gregkh#2 (&desc->request_mutex){+.+.}-{4:4}: -> gregkh#1 (ipclock){+.+.}-{4:4}: -> #0 (intel_soc_pmic_bxtwc:502:(&bxtwc_regmap_config)->lock){+.+.}-{4:4}: Chain exists of: intel_soc_pmic_bxtwc:502:(&bxtwc_regmap_config)->lock --> &desc->request_mutex --> &d->lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&d->lock); lock(&desc->request_mutex); lock(&d->lock); lock(intel_soc_pmic_bxtwc:502:(&bxtwc_regmap_config)->lock); *** DEADLOCK *** 3 locks held by modprobe/141: #0: ffff8994419368f8 (&dev->mutex){....}-{4:4}, at: __driver_attach+0xf6/0x250 gregkh#1: ffff89944690b250 (&desc->request_mutex){+.+.}-{4:4}, at: __setup_irq+0x1a2/0x790 gregkh#2: ffff899446947c68 (&d->lock){+.+.}-{4:4}, at: __setup_irq+0x682/0x790 Set a lockdep class when we map the IRQ so that it doesn't warn about a lockdep bug that doesn't exist. Fixes: 4af8be6 ("regmap: Convert regmap_irq to use irq_domain") Signed-off-by: Andy Shevchenko <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Mark Brown <[email protected]>

Tariq Toukan says: ==================== net/mlx5: hw counters refactor This is a patchset re-post, see: https://lore.kernel.org/[email protected] In this patchset, Cosmin refactors hw counters and solves perf scaling issue. Series generated against: commit c824deb ("cxgb4: clip_tbl: Fix spelling mistake "wont" -> "won't"") HW counters are central to mlx5 driver operations. They are hardware objects created and used alongside most steering operations, and queried from a variety of places. Most counters are queried in bulk from a periodic task in fs_counters.c. Counter performance is important and as such, a variety of improvements have been done over the years. Currently, counters are allocated from pools, which are bulk allocated to amortize the cost of firmware commands. Counters are managed through an IDR, a doubly linked list and two atomic single linked lists. Adding/removing counters is a complex dance between user contexts requesting it and the mlx5_fc_stats_work task which does most of the work. Under high load (e.g. from connection tracking flow insertion/deletion), the counter code becomes a bottleneck, as seen on flame graphs. Whenever a counter is deleted, it gets added to a list and the wq task is scheduled to run immediately to actually delete it. This is done via mod_delayed_work which uses an internal spinlock. In some tests, waiting for this spinlock took up to 66% of all samples. This series refactors the counter code to use a more straight-forward approach, avoiding the mod_delayed_work problem and making the code easier to understand. For that: - patch gregkh#1 moves counters data structs to a more appropriate place. - patch gregkh#2 simplifies the bulk query allocation scheme by using vmalloc. - patch gregkh#3 replaces the IDR+3 lists with an xarray. This is the main patch of the series, solving the spinlock congestion issue. - patch gregkh#4 removes an unnecessary cacheline alignment causing a lot of memory to be wasted. - patches gregkh#5 and gregkh#6 are small cleanups enabled by the refactoring. ==================== Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>

Edward Cree says: ==================== sfc: per-queue stats This series implements the netdev_stat_ops interface for per-queue statistics in the sfc driver, partly using existing counters that were originally added for ethtool -S output. Changed in v4: * remove RFC tags Changed in v3: * make TX stats count completions rather than enqueues * add new patch gregkh#4 to account for XDP TX separately from netdev traffic and include it in base_stats * move the tx_queue->old_* members out of the fastpath cachelines * note on patch gregkh#6 that our hw_gso stats still count enqueues * RFC since net-next is closed right now Changed in v2: * exclude (dedicated) XDP TXQ stats from per-queue TX stats * explain patch gregkh#3 better ==================== Signed-off-by: David S. Miller <[email protected]>

Daniel Machon says: ==================== net: sparx5: prepare for lan969x switch driver == Description: This series is the first of a multi-part series, that prepares and adds support for the new lan969x switch driver. The upstreaming efforts is split into multiple series (might change a bit as we go along): 1) Prepare the Sparx5 driver for lan969x (this series) 2) Add support lan969x (same basic features as Sparx5 provides + RGMII, excl. FDMA and VCAP) 3) Add support for lan969x FDMA 4) Add support for lan969x VCAP == Lan969x in short: The lan969x Ethernet switch family [1] provides a rich set of switching features and port configurations (up to 30 ports) from 10Mbps to 10Gbps, with support for RGMII, SGMII, QSGMII, USGMII, and USXGMII, ideal for industrial & process automation infrastructure applications, transport, grid automation, power substation automation, and ring & intra-ring topologies. The LAN969x family is hardware and software compatible and scalable supporting 46Gbps to 102Gbps switch bandwidths. == Preparing Sparx5 for lan969x: The lan969x switch chip reuses many of the IP's of the Sparx5 switch chip, therefore it has been decided to add support through the existing Sparx5 driver, in order to avoid a bunch of duplicate code. However, in order to reuse the Sparx5 switch driver, we have to introduce some mechanisms to handle the chip differences that are there. These mechanisms are: - Platform match data to contain all the differences that needs to be handled (constants, ops etc.) - Register macro indirection layer so that we can reuse the existing register macros. - Function for branching out on platform type where required. In some places we ops out functions and in other places we branch on the chip type. Exactly when we choose one over the other, is an estimate in each case. After this series is applied, the Sparx5 driver will be prepared for lan969x and still function exactly as before. == Patch breakdown: Patch gregkh#1 adds private match data Patch gregkh#2 adds register macro indirection layer Patch gregkh#3-gregkh#4 does some preparation work Patch gregkh#5-gregkh#7 adds chip constants and updates the code to use them Patch gregkh#8-gregkh#13 adds and uses ops for handling functions differently on the two platforms. Patch gregkh#14 adds and uses a macro for branching out on the chip type. Patch gregkh#15 (NEW) redefines macros for internal ports and PGID's. [1] https://www.microchip.com/en-us/product/lan9698 To: David S. Miller <[email protected]> To: Eric Dumazet <[email protected]> To: Jakub Kicinski <[email protected]> To: Paolo Abeni <[email protected]> To: Lars Povlsen <[email protected]> To: Steen Hegelund <[email protected]> To: [email protected] To: [email protected] To: [email protected] To: Richard Cochran <[email protected]> To: [email protected] To: [email protected] To: [email protected] To: [email protected] To: [email protected] To: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Signed-off-by: Daniel Machon <[email protected]> ==================== Link: https://patch.msgid.link/20241004-b4-sparx5-lan969x-switch-driver-v2-0-d3290f581663@microchip.com Signed-off-by: Paolo Abeni <[email protected]>

Eric Dumazet says: ==================== net: remove RTNL from fib_seq_sum() This series is inspired by a syzbot report showing rtnl contention and one thread blocked in: 7 locks held by syz-executor/10835: #0: ffff888033390420 (sb_writers#8){.+.+}-{0:0}, at: file_start_write include/linux/fs.h:2931 [inline] #0: ffff888033390420 (sb_writers#8){.+.+}-{0:0}, at: vfs_write+0x224/0xc90 fs/read_write.c:679 gregkh#1: ffff88806df6bc88 (&of->mutex){+.+.}-{3:3}, at: kernfs_fop_write_iter+0x1ea/0x500 fs/kernfs/file.c:325 gregkh#2: ffff888026fcf3c8 (kn->active#50){.+.+}-{0:0}, at: kernfs_fop_write_iter+0x20e/0x500 fs/kernfs/file.c:326 gregkh#3: ffffffff8f56f848 (nsim_bus_dev_list_lock){+.+.}-{3:3}, at: new_device_store+0x1b4/0x890 drivers/net/netdevsim/bus.c:166 gregkh#4: ffff88805e0140e8 (&dev->mutex){....}-{3:3}, at: device_lock include/linux/device.h:1014 [inline] gregkh#4: ffff88805e0140e8 (&dev->mutex){....}-{3:3}, at: __device_attach+0x8e/0x520 drivers/base/dd.c:1005 gregkh#5: ffff88805c5fb250 (&devlink->lock_key#55){+.+.}-{3:3}, at: nsim_drv_probe+0xcb/0xb80 drivers/net/netdevsim/dev.c:1534 gregkh#6: ffffffff8fcd1748 (rtnl_mutex){+.+.}-{3:3}, at: fib_seq_sum+0x31/0x290 net/core/fib_notifier.c:46 ==================== Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>

Petr Machata says: ==================== selftests: net: Introduce deferred commands Recently, a defer helper was added to Python selftests. The idea is to keep cleanup commands close to their dirtying counterparts, thereby making it more transparent what is cleaning up what, making it harder to miss a cleanup, and make the whole cleanup business exception safe. All these benefits are applicable to bash as well, exception safety can be interpreted in terms of safety vs. a SIGINT. This patchset therefore introduces a framework of several helpers that serve to schedule cleanups in bash selftests. - Patch gregkh#1 has more details about the primitives being introduced. Patch gregkh#2 adds a fallback cleanup() function to lib.sh, because ideally selftests wouldn't need to introduce a dedicated cleanup function at all. - Patch gregkh#3 adds a parameter to stop_traffic(), which makes it possible to start other background processes after the traffic is started without confusing the cleanup. - Patches gregkh#4 to gregkh#10 convert a number of selftests. The goal was to convert all tests that use start_traffic / stop_traffic to the defer framework. Leftover traffic generators are a particularly painful sort of a missed cleanup. Normal unfinished cleanups can usually be cleaned up simply by rerunning the test and interrupting it early to let the cleanups run again / in full. This does not work with stop_traffic, because it is only issued at the end of the test case that starts the traffic. At the same time, leftover traffic generators influence follow-up test runs, and are hard to notice. The tests were however converted whole-sale, not just their traffic bits. Thus they form a proof of concept of the defer framework. ==================== Link: https://patch.msgid.link/[email protected] Signed-off-by: Paolo Abeni <[email protected]>

Andrii Nakryiko says: ==================== Fix libbpf's bpf_object and BPF subskel interoperability Fix libbpf's global data map mmap()'ing logic to make BPF objects loaded through generic bpf_object__load() API interoperable with BPF subskeleton instantiated from such BPF object. The issue is in re-mmap()'ing of global data maps after BPF object is loaded into kernel, which is currently done in BPF skeleton-specific code, and should instead be done in generic and common bpf_object_load() logic. See patch gregkh#2 for the fix, patch gregkh#3 for the selftests. Patch gregkh#1 is preliminary fix for existing spin_lock selftests which currently works by accident. ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>

Ley Foon Tan says: ==================== net: stmmac: dwmac4: Fixes issues in dwmac4 This patch series fixes issues in the dwmac4 driver. These three patches don't cause any user-visible issues, so they are targeted for net-next. Patch gregkh#1: Corrects the masking logic in the MTL Operation Mode RTC mask and shift macros. The current code lacks the use of the ~ operator, which is necessary to clear the bits properly. Patch gregkh#2: Addresses inaccuracies in the MTL_OP_MODE_*_MASK macros. The RTC fields are located in bits [1:0], and this patch ensures the mask and shift macros use the appropriate values to reflect this. Patch gregkh#3: Moves the handling of the Receive Watchdog Timeout (RWT) out of the Abnormal Interrupt Summary (AIS) condition. According to the databook, the RWT interrupt is not included in the AIS. v1: https://lore.kernel.org/[email protected] v2: https://lore.kernel.org/[email protected] ==================== Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>

…tified' Petr Machata says: ==================== net: ndo_fdb_add/del: Have drivers report whether they notified Currently when FDB entries are added to or deleted from a VXLAN netdevice, the VXLAN driver emits one notification, including the VXLAN-specific attributes. The core however always sends a notification as well, a generic one. Thus two notifications are unnecessarily sent for these operations. A similar situation comes up with bridge driver, which also emits notifications on its own. # ip link add name vx type vxlan id 1000 dstport 4789 # bridge monitor fdb & [1] 1981693 # bridge fdb add de:ad:be:ef:13:37 dev vx self dst 192.0.2.1 de:ad:be:ef:13:37 dev vx dst 192.0.2.1 self permanent de:ad:be:ef:13:37 dev vx self permanent In order to prevent this duplicity, add a parameter, bool *notified, to ndo_fdb_add and ndo_fdb_del. The flag is primed to false, and if the callee sends a notification on its own, it sets the flag to true, thus informing the core that it should not generate another notification. Patches gregkh#1 to gregkh#2 are concerned with the above. In the remaining patches, gregkh#3 to gregkh#7, add a selftest. This takes place across several patches. Many of the helpers we would like to use for the test are in forwarding/lib.sh, whereas net/ is a more suitable place for the test, so the libraries need to be massaged a bit first. ==================== Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>

Patch series "page allocation tag compression", v4. This patchset implements several improvements: 1. Gracefully handles module unloading while there are used allocations allocated from that module; 2. Provides an option to store page allocation tag references in the page flags, removing dependency on page extensions and eliminating the memory overhead from storing page allocation references (~0.2% of total system memory). This also improves page allocation performance when CONFIG_MEM_ALLOC_PROFILING is enabled by eliminating page extension lookup. Page allocation performance overhead is reduced from 41% to 5.5%. Patch gregkh#1 introduces mas_for_each_rev() helper function. Patch gregkh#2 introduces shutdown_mem_profiling() helper function to be used when disabling memory allocation profiling. Patch gregkh#3 copies module tags into virtually contiguous memory which serves two purposes: - Lets us deal with the situation when module is unloaded while there are still live allocations from that module. Since we are using a copy version of the tags we can safely unload the module. Space and gaps in this contiguous memory are managed using a maple tree. - Enables simple indexing of the tags in the later patches. Patch gregkh#4 changes the way we allocate virtually contiguous memory for module tags to reserve only vitrual area and populate physical pages only as needed at module load time. Patch gregkh#5 abstracts page allocation tag reference to simplify later changes. Patch gregkh#6 adds compression option to the sysctl.vm.mem_profiling boot parameter for storing page allocation tag references inside page flags if they fit. If the number of available page flag bits is insufficient to address all kernel allocations, memory allocation profiling gets disabled with an appropriate warning. This patch (of 6): Add mas_for_each_rev() function to iterate maple tree nodes in reverse order. Link: https://lkml.kernel.org/r/[email protected] Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Suren Baghdasaryan <[email protected]> Suggested-by: Liam R. Howlett <[email protected]> Reviewed-by: Liam R. Howlett <[email protected]> Reviewed-by: Pasha Tatashin <[email protected]> Cc: Ard Biesheuvel <[email protected]> Cc: Arnd Bergmann <[email protected]> Cc: Borislav Petkov (AMD) <[email protected]> Cc: Christoph Hellwig <[email protected]> Cc: Daniel Gomez <[email protected]> Cc: David Hildenbrand <[email protected]> Cc: Davidlohr Bueso <[email protected]> Cc: David Rientjes <[email protected]> Cc: Dennis Zhou <[email protected]> Cc: Johannes Weiner <[email protected]> Cc: John Hubbard <[email protected]> Cc: Jonathan Corbet <[email protected]> Cc: Joonsoo Kim <[email protected]> Cc: Kalesh Singh <[email protected]> Cc: Kees Cook <[email protected]> Cc: Kent Overstreet <[email protected]> Cc: Luis Chamberlain <[email protected]> Cc: Matthew Wilcox <[email protected]> Cc: Michal Hocko <[email protected]> Cc: Mike Rapoport (Microsoft) <[email protected]> Cc: Minchan Kim <[email protected]> Cc: Paul E. McKenney <[email protected]> Cc: Petr Pavlu <[email protected]> Cc: Roman Gushchin <[email protected]> Cc: Sami Tolvanen <[email protected]> Cc: Sourav Panda <[email protected]> Cc: Steven Rostedt (Google) <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Thomas Huth <[email protected]> Cc: Uladzislau Rezki (Sony) <[email protected]> Cc: Vlastimil Babka <[email protected]> Cc: Xiongwei Song <[email protected]> Cc: Yu Zhao <[email protected]> Signed-off-by: Andrew Morton <[email protected]>

LTP reported a NULL pointer dereference as followed: CPU: 7 UID: 0 PID: 5995 Comm: cat Kdump: loaded Not tainted 6.12.0-rc6+ gregkh#3 Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 pstate: 40400005 (nZcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : __pi_strcmp+0x24/0x140 lr : zcomp_available_show+0x60/0x100 [zram] sp : ffff800088b93b90 x29: ffff800088b93b90 x28: 0000000000000001 x27: 0000000000400cc0 x26: 0000000000000ffe x25: ffff80007b3e2388 x24: 0000000000000000 x23: ffff80007b3e2390 x22: ffff0004041a9000 x21: ffff80007b3e2900 x20: 0000000000000000 x19: 0000000000000000 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000000 x10: ffff80007b3e2900 x9 : ffff80007b3cb280 x8 : 0101010101010101 x7 : 0000000000000000 x6 : 0000000000000000 x5 : 0000000000000040 x4 : 0000000000000000 x3 : 00656c722d6f7a6c x2 : 0000000000000000 x1 : ffff80007b3e2900 x0 : 0000000000000000 Call trace: __pi_strcmp+0x24/0x140 comp_algorithm_show+0x40/0x70 [zram] dev_attr_show+0x28/0x80 sysfs_kf_seq_show+0x90/0x140 kernfs_seq_show+0x34/0x48 seq_read_iter+0x1d4/0x4e8 kernfs_fop_read_iter+0x40/0x58 new_sync_read+0x9c/0x168 vfs_read+0x1a8/0x1f8 ksys_read+0x74/0x108 __arm64_sys_read+0x24/0x38 invoke_syscall+0x50/0x120 el0_svc_common.constprop.0+0xc8/0xf0 do_el0_svc+0x24/0x38 el0_svc+0x38/0x138 el0t_64_sync_handler+0xc0/0xc8 el0t_64_sync+0x188/0x190 The zram->comp_algs[ZRAM_PRIMARY_COMP] can be NULL in zram_add() if comp_algorithm_set() has not been called. User can access the zram device by sysfs after device_add_disk(), so there is a time window to trigger the NULL pointer dereference. Move it ahead device_add_disk() to make sure when user can access the zram device, it is ready. comp_algorithm_set() is protected by zram->init_lock in other places and no such problem. Link: https://lkml.kernel.org/r/[email protected] Fixes: 7ac07a2 ("zram: preparation for multi-zcomp support") Signed-off-by: Liu Shixin <[email protected]> Reviewed-by: Sergey Senozhatsky <[email protected]> Cc: Jens Axboe <[email protected]> Cc: Minchan Kim <[email protected]> Signed-off-by: Andrew Morton <[email protected]>

The function blk_revalidate_disk_zones() calls the function disk_update_zone_resources() after freezing the device queue. In turn, disk_update_zone_resources() calls queue_limits_start_update() which takes a queue limits mutex lock, resulting in the ordering: q->q_usage_counter check -> q->limits_lock. However, the usual ordering is to always take a queue limit lock before freezing the queue to commit the limits updates, e.g., the code pattern: lim = queue_limits_start_update(q); ... blk_mq_freeze_queue(q); ret = queue_limits_commit_update(q, &lim); blk_mq_unfreeze_queue(q); Thus, blk_revalidate_disk_zones() introduces a potential circular locking dependency deadlock that lockdep sometimes catches with the splat: [ 51.934109] ====================================================== [ 51.935916] WARNING: possible circular locking dependency detected [ 51.937561] 6.12.0+ #2107 Not tainted [ 51.938648] ------------------------------------------------------ [ 51.940351] kworker/u16:4/157 is trying to acquire lock: [ 51.941805] ffff9fff0aa0bea8 (&q->limits_lock){+.+.}-{4:4}, at: disk_update_zone_resources+0x86/0x170 [ 51.944314] but task is already holding lock: [ 51.945688] ffff9fff0aa0b890 (&q->q_usage_counter(queue)gregkh#3){++++}-{0:0}, at: blk_revalidate_disk_zones+0x15f/0x340 [ 51.948527] which lock already depends on the new lock. [ 51.951296] the existing dependency chain (in reverse order) is: [ 51.953708] -> gregkh#1 (&q->q_usage_counter(queue)gregkh#3){++++}-{0:0}: [ 51.956131] blk_queue_enter+0x1c9/0x1e0 [ 51.957290] blk_mq_alloc_request+0x187/0x2a0 [ 51.958365] scsi_execute_cmd+0x78/0x490 [scsi_mod] [ 51.959514] read_capacity_16+0x111/0x410 [sd_mod] [ 51.960693] sd_revalidate_disk.isra.0+0x872/0x3240 [sd_mod] [ 51.962004] sd_probe+0x2d7/0x520 [sd_mod] [ 51.962993] really_probe+0xd5/0x330 [ 51.963898] __driver_probe_device+0x78/0x110 [ 51.964925] driver_probe_device+0x1f/0xa0 [ 51.965916] __driver_attach_async_helper+0x60/0xe0 [ 51.967017] async_run_entry_fn+0x2e/0x140 [ 51.968004] process_one_work+0x21f/0x5a0 [ 51.968987] worker_thread+0x1dc/0x3c0 [ 51.969868] kthread+0xe0/0x110 [ 51.970377] ret_from_fork+0x31/0x50 [ 51.970983] ret_from_fork_asm+0x11/0x20 [ 51.971587] -> #0 (&q->limits_lock){+.+.}-{4:4}: [ 51.972479] __lock_acquire+0x1337/0x2130 [ 51.973133] lock_acquire+0xc5/0x2d0 [ 51.973691] __mutex_lock+0xda/0xcf0 [ 51.974300] disk_update_zone_resources+0x86/0x170 [ 51.975032] blk_revalidate_disk_zones+0x16c/0x340 [ 51.975740] sd_zbc_revalidate_zones+0x73/0x160 [sd_mod] [ 51.976524] sd_revalidate_disk.isra.0+0x465/0x3240 [sd_mod] [ 51.977824] sd_probe+0x2d7/0x520 [sd_mod] [ 51.978917] really_probe+0xd5/0x330 [ 51.979915] __driver_probe_device+0x78/0x110 [ 51.981047] driver_probe_device+0x1f/0xa0 [ 51.982143] __driver_attach_async_helper+0x60/0xe0 [ 51.983282] async_run_entry_fn+0x2e/0x140 [ 51.984319] process_one_work+0x21f/0x5a0 [ 51.985873] worker_thread+0x1dc/0x3c0 [ 51.987289] kthread+0xe0/0x110 [ 51.988546] ret_from_fork+0x31/0x50 [ 51.989926] ret_from_fork_asm+0x11/0x20 [ 51.991376] other info that might help us debug this: [ 51.994127] Possible unsafe locking scenario: [ 51.995651] CPU0 CPU1 [ 51.996694] ---- ---- [ 51.997716] lock(&q->q_usage_counter(queue)gregkh#3); [ 51.998817] lock(&q->limits_lock); [ 52.000043] lock(&q->q_usage_counter(queue)gregkh#3); [ 52.001638] lock(&q->limits_lock); [ 52.002485] *** DEADLOCK *** Prevent this issue by moving the calls to blk_mq_freeze_queue() and blk_mq_unfreeze_queue() around the call to queue_limits_commit_update() in disk_update_zone_resources(). In case of revalidation failure, the call to disk_free_zone_resources() in blk_revalidate_disk_zones() is still done with the queue frozen as before. Fixes: 843283e ("block: Fake max open zones limit when there is no limit") Cc: [email protected] Signed-off-by: Damien Le Moal <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]>

[ Upstream commit 953e549 ] Lockdep gives a false positive splat as it can't distinguish the lock which is taken by different IRQ descriptors from different IRQ chips that are organized in a way of a hierarchy: ====================================================== WARNING: possible circular locking dependency detected 6.12.0-rc5-next-20241101-00148-g9fabf8160b53 #562 Tainted: G W ------------------------------------------------------ modprobe/141 is trying to acquire lock: ffff899446947868 (intel_soc_pmic_bxtwc:502:(&bxtwc_regmap_config)->lock){+.+.}-{4:4}, at: regmap_update_bits_base+0x33/0x90 but task is already holding lock: ffff899446947c68 (&d->lock){+.+.}-{4:4}, at: __setup_irq+0x682/0x790 which lock already depends on the new lock. -> gregkh#3 (&d->lock){+.+.}-{4:4}: -> gregkh#2 (&desc->request_mutex){+.+.}-{4:4}: -> gregkh#1 (ipclock){+.+.}-{4:4}: -> #0 (intel_soc_pmic_bxtwc:502:(&bxtwc_regmap_config)->lock){+.+.}-{4:4}: Chain exists of: intel_soc_pmic_bxtwc:502:(&bxtwc_regmap_config)->lock --> &desc->request_mutex --> &d->lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&d->lock); lock(&desc->request_mutex); lock(&d->lock); lock(intel_soc_pmic_bxtwc:502:(&bxtwc_regmap_config)->lock); *** DEADLOCK *** 3 locks held by modprobe/141: #0: ffff8994419368f8 (&dev->mutex){....}-{4:4}, at: __driver_attach+0xf6/0x250 gregkh#1: ffff89944690b250 (&desc->request_mutex){+.+.}-{4:4}, at: __setup_irq+0x1a2/0x790 gregkh#2: ffff899446947c68 (&d->lock){+.+.}-{4:4}, at: __setup_irq+0x682/0x790 Set a lockdep class when we map the IRQ so that it doesn't warn about a lockdep bug that doesn't exist. Fixes: 4af8be6 ("regmap: Convert regmap_irq to use irq_domain") Signed-off-by: Andy Shevchenko <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Mark Brown <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

commit 0b83c86 upstream. The function blk_revalidate_disk_zones() calls the function disk_update_zone_resources() after freezing the device queue. In turn, disk_update_zone_resources() calls queue_limits_start_update() which takes a queue limits mutex lock, resulting in the ordering: q->q_usage_counter check -> q->limits_lock. However, the usual ordering is to always take a queue limit lock before freezing the queue to commit the limits updates, e.g., the code pattern: lim = queue_limits_start_update(q); ... blk_mq_freeze_queue(q); ret = queue_limits_commit_update(q, &lim); blk_mq_unfreeze_queue(q); Thus, blk_revalidate_disk_zones() introduces a potential circular locking dependency deadlock that lockdep sometimes catches with the splat: [ 51.934109] ====================================================== [ 51.935916] WARNING: possible circular locking dependency detected [ 51.937561] 6.12.0+ #2107 Not tainted [ 51.938648] ------------------------------------------------------ [ 51.940351] kworker/u16:4/157 is trying to acquire lock: [ 51.941805] ffff9fff0aa0bea8 (&q->limits_lock){+.+.}-{4:4}, at: disk_update_zone_resources+0x86/0x170 [ 51.944314] but task is already holding lock: [ 51.945688] ffff9fff0aa0b890 (&q->q_usage_counter(queue)gregkh#3){++++}-{0:0}, at: blk_revalidate_disk_zones+0x15f/0x340 [ 51.948527] which lock already depends on the new lock. [ 51.951296] the existing dependency chain (in reverse order) is: [ 51.953708] -> gregkh#1 (&q->q_usage_counter(queue)gregkh#3){++++}-{0:0}: [ 51.956131] blk_queue_enter+0x1c9/0x1e0 [ 51.957290] blk_mq_alloc_request+0x187/0x2a0 [ 51.958365] scsi_execute_cmd+0x78/0x490 [scsi_mod] [ 51.959514] read_capacity_16+0x111/0x410 [sd_mod] [ 51.960693] sd_revalidate_disk.isra.0+0x872/0x3240 [sd_mod] [ 51.962004] sd_probe+0x2d7/0x520 [sd_mod] [ 51.962993] really_probe+0xd5/0x330 [ 51.963898] __driver_probe_device+0x78/0x110 [ 51.964925] driver_probe_device+0x1f/0xa0 [ 51.965916] __driver_attach_async_helper+0x60/0xe0 [ 51.967017] async_run_entry_fn+0x2e/0x140 [ 51.968004] process_one_work+0x21f/0x5a0 [ 51.968987] worker_thread+0x1dc/0x3c0 [ 51.969868] kthread+0xe0/0x110 [ 51.970377] ret_from_fork+0x31/0x50 [ 51.970983] ret_from_fork_asm+0x11/0x20 [ 51.971587] -> #0 (&q->limits_lock){+.+.}-{4:4}: [ 51.972479] __lock_acquire+0x1337/0x2130 [ 51.973133] lock_acquire+0xc5/0x2d0 [ 51.973691] __mutex_lock+0xda/0xcf0 [ 51.974300] disk_update_zone_resources+0x86/0x170 [ 51.975032] blk_revalidate_disk_zones+0x16c/0x340 [ 51.975740] sd_zbc_revalidate_zones+0x73/0x160 [sd_mod] [ 51.976524] sd_revalidate_disk.isra.0+0x465/0x3240 [sd_mod] [ 51.977824] sd_probe+0x2d7/0x520 [sd_mod] [ 51.978917] really_probe+0xd5/0x330 [ 51.979915] __driver_probe_device+0x78/0x110 [ 51.981047] driver_probe_device+0x1f/0xa0 [ 51.982143] __driver_attach_async_helper+0x60/0xe0 [ 51.983282] async_run_entry_fn+0x2e/0x140 [ 51.984319] process_one_work+0x21f/0x5a0 [ 51.985873] worker_thread+0x1dc/0x3c0 [ 51.987289] kthread+0xe0/0x110 [ 51.988546] ret_from_fork+0x31/0x50 [ 51.989926] ret_from_fork_asm+0x11/0x20 [ 51.991376] other info that might help us debug this: [ 51.994127] Possible unsafe locking scenario: [ 51.995651] CPU0 CPU1 [ 51.996694] ---- ---- [ 51.997716] lock(&q->q_usage_counter(queue)gregkh#3); [ 51.998817] lock(&q->limits_lock); [ 52.000043] lock(&q->q_usage_counter(queue)gregkh#3); [ 52.001638] lock(&q->limits_lock); [ 52.002485] *** DEADLOCK *** Prevent this issue by moving the calls to blk_mq_freeze_queue() and blk_mq_unfreeze_queue() around the call to queue_limits_commit_update() in disk_update_zone_resources(). In case of revalidation failure, the call to disk_free_zone_resources() in blk_revalidate_disk_zones() is still done with the queue frozen as before. Fixes: 843283e ("block: Fake max open zones limit when there is no limit") Cc: [email protected] Signed-off-by: Damien Le Moal <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit 953e549 ] Lockdep gives a false positive splat as it can't distinguish the lock which is taken by different IRQ descriptors from different IRQ chips that are organized in a way of a hierarchy: ====================================================== WARNING: possible circular locking dependency detected 6.12.0-rc5-next-20241101-00148-g9fabf8160b53 #562 Tainted: G W ------------------------------------------------------ modprobe/141 is trying to acquire lock: ffff899446947868 (intel_soc_pmic_bxtwc:502:(&bxtwc_regmap_config)->lock){+.+.}-{4:4}, at: regmap_update_bits_base+0x33/0x90 but task is already holding lock: ffff899446947c68 (&d->lock){+.+.}-{4:4}, at: __setup_irq+0x682/0x790 which lock already depends on the new lock. -> #3 (&d->lock){+.+.}-{4:4}: -> #2 (&desc->request_mutex){+.+.}-{4:4}: -> #1 (ipclock){+.+.}-{4:4}: -> #0 (intel_soc_pmic_bxtwc:502:(&bxtwc_regmap_config)->lock){+.+.}-{4:4}: Chain exists of: intel_soc_pmic_bxtwc:502:(&bxtwc_regmap_config)->lock --> &desc->request_mutex --> &d->lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&d->lock); lock(&desc->request_mutex); lock(&d->lock); lock(intel_soc_pmic_bxtwc:502:(&bxtwc_regmap_config)->lock); *** DEADLOCK *** 3 locks held by modprobe/141: #0: ffff8994419368f8 (&dev->mutex){....}-{4:4}, at: __driver_attach+0xf6/0x250 #1: ffff89944690b250 (&desc->request_mutex){+.+.}-{4:4}, at: __setup_irq+0x1a2/0x790 #2: ffff899446947c68 (&d->lock){+.+.}-{4:4}, at: __setup_irq+0x682/0x790 Set a lockdep class when we map the IRQ so that it doesn't warn about a lockdep bug that doesn't exist. Fixes: 4af8be6 ("regmap: Convert regmap_irq to use irq_domain") Signed-off-by: Andy Shevchenko <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Mark Brown <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit f364cde ] LTP reported a NULL pointer dereference as followed: CPU: 7 UID: 0 PID: 5995 Comm: cat Kdump: loaded Not tainted 6.12.0-rc6+ #3 Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 pstate: 40400005 (nZcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : __pi_strcmp+0x24/0x140 lr : zcomp_available_show+0x60/0x100 [zram] sp : ffff800088b93b90 x29: ffff800088b93b90 x28: 0000000000000001 x27: 0000000000400cc0 x26: 0000000000000ffe x25: ffff80007b3e2388 x24: 0000000000000000 x23: ffff80007b3e2390 x22: ffff0004041a9000 x21: ffff80007b3e2900 x20: 0000000000000000 x19: 0000000000000000 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000000 x10: ffff80007b3e2900 x9 : ffff80007b3cb280 x8 : 0101010101010101 x7 : 0000000000000000 x6 : 0000000000000000 x5 : 0000000000000040 x4 : 0000000000000000 x3 : 00656c722d6f7a6c x2 : 0000000000000000 x1 : ffff80007b3e2900 x0 : 0000000000000000 Call trace: __pi_strcmp+0x24/0x140 comp_algorithm_show+0x40/0x70 [zram] dev_attr_show+0x28/0x80 sysfs_kf_seq_show+0x90/0x140 kernfs_seq_show+0x34/0x48 seq_read_iter+0x1d4/0x4e8 kernfs_fop_read_iter+0x40/0x58 new_sync_read+0x9c/0x168 vfs_read+0x1a8/0x1f8 ksys_read+0x74/0x108 __arm64_sys_read+0x24/0x38 invoke_syscall+0x50/0x120 el0_svc_common.constprop.0+0xc8/0xf0 do_el0_svc+0x24/0x38 el0_svc+0x38/0x138 el0t_64_sync_handler+0xc0/0xc8 el0t_64_sync+0x188/0x190 The zram->comp_algs[ZRAM_PRIMARY_COMP] can be NULL in zram_add() if comp_algorithm_set() has not been called. User can access the zram device by sysfs after device_add_disk(), so there is a time window to trigger the NULL pointer dereference. Move it ahead device_add_disk() to make sure when user can access the zram device, it is ready. comp_algorithm_set() is protected by zram->init_lock in other places and no such problem. Link: https://lkml.kernel.org/r/[email protected] Fixes: 7ac07a2 ("zram: preparation for multi-zcomp support") Signed-off-by: Liu Shixin <[email protected]> Reviewed-by: Sergey Senozhatsky <[email protected]> Cc: Jens Axboe <[email protected]> Cc: Minchan Kim <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

commit 0b83c86 upstream. The function blk_revalidate_disk_zones() calls the function disk_update_zone_resources() after freezing the device queue. In turn, disk_update_zone_resources() calls queue_limits_start_update() which takes a queue limits mutex lock, resulting in the ordering: q->q_usage_counter check -> q->limits_lock. However, the usual ordering is to always take a queue limit lock before freezing the queue to commit the limits updates, e.g., the code pattern: lim = queue_limits_start_update(q); ... blk_mq_freeze_queue(q); ret = queue_limits_commit_update(q, &lim); blk_mq_unfreeze_queue(q); Thus, blk_revalidate_disk_zones() introduces a potential circular locking dependency deadlock that lockdep sometimes catches with the splat: [ 51.934109] ====================================================== [ 51.935916] WARNING: possible circular locking dependency detected [ 51.937561] 6.12.0+ #2107 Not tainted [ 51.938648] ------------------------------------------------------ [ 51.940351] kworker/u16:4/157 is trying to acquire lock: [ 51.941805] ffff9fff0aa0bea8 (&q->limits_lock){+.+.}-{4:4}, at: disk_update_zone_resources+0x86/0x170 [ 51.944314] but task is already holding lock: [ 51.945688] ffff9fff0aa0b890 (&q->q_usage_counter(queue)#3){++++}-{0:0}, at: blk_revalidate_disk_zones+0x15f/0x340 [ 51.948527] which lock already depends on the new lock. [ 51.951296] the existing dependency chain (in reverse order) is: [ 51.953708] -> #1 (&q->q_usage_counter(queue)#3){++++}-{0:0}: [ 51.956131] blk_queue_enter+0x1c9/0x1e0 [ 51.957290] blk_mq_alloc_request+0x187/0x2a0 [ 51.958365] scsi_execute_cmd+0x78/0x490 [scsi_mod] [ 51.959514] read_capacity_16+0x111/0x410 [sd_mod] [ 51.960693] sd_revalidate_disk.isra.0+0x872/0x3240 [sd_mod] [ 51.962004] sd_probe+0x2d7/0x520 [sd_mod] [ 51.962993] really_probe+0xd5/0x330 [ 51.963898] __driver_probe_device+0x78/0x110 [ 51.964925] driver_probe_device+0x1f/0xa0 [ 51.965916] __driver_attach_async_helper+0x60/0xe0 [ 51.967017] async_run_entry_fn+0x2e/0x140 [ 51.968004] process_one_work+0x21f/0x5a0 [ 51.968987] worker_thread+0x1dc/0x3c0 [ 51.969868] kthread+0xe0/0x110 [ 51.970377] ret_from_fork+0x31/0x50 [ 51.970983] ret_from_fork_asm+0x11/0x20 [ 51.971587] -> #0 (&q->limits_lock){+.+.}-{4:4}: [ 51.972479] __lock_acquire+0x1337/0x2130 [ 51.973133] lock_acquire+0xc5/0x2d0 [ 51.973691] __mutex_lock+0xda/0xcf0 [ 51.974300] disk_update_zone_resources+0x86/0x170 [ 51.975032] blk_revalidate_disk_zones+0x16c/0x340 [ 51.975740] sd_zbc_revalidate_zones+0x73/0x160 [sd_mod] [ 51.976524] sd_revalidate_disk.isra.0+0x465/0x3240 [sd_mod] [ 51.977824] sd_probe+0x2d7/0x520 [sd_mod] [ 51.978917] really_probe+0xd5/0x330 [ 51.979915] __driver_probe_device+0x78/0x110 [ 51.981047] driver_probe_device+0x1f/0xa0 [ 51.982143] __driver_attach_async_helper+0x60/0xe0 [ 51.983282] async_run_entry_fn+0x2e/0x140 [ 51.984319] process_one_work+0x21f/0x5a0 [ 51.985873] worker_thread+0x1dc/0x3c0 [ 51.987289] kthread+0xe0/0x110 [ 51.988546] ret_from_fork+0x31/0x50 [ 51.989926] ret_from_fork_asm+0x11/0x20 [ 51.991376] other info that might help us debug this: [ 51.994127] Possible unsafe locking scenario: [ 51.995651] CPU0 CPU1 [ 51.996694] ---- ---- [ 51.997716] lock(&q->q_usage_counter(queue)#3); [ 51.998817] lock(&q->limits_lock); [ 52.000043] lock(&q->q_usage_counter(queue)#3); [ 52.001638] lock(&q->limits_lock); [ 52.002485] *** DEADLOCK *** Prevent this issue by moving the calls to blk_mq_freeze_queue() and blk_mq_unfreeze_queue() around the call to queue_limits_commit_update() in disk_update_zone_resources(). In case of revalidation failure, the call to disk_free_zone_resources() in blk_revalidate_disk_zones() is still done with the queue frozen as before. Fixes: 843283e ("block: Fake max open zones limit when there is no limit") Cc: [email protected] Signed-off-by: Damien Le Moal <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

Konstantin Shkolnyy says: ==================== vsock/test: fix wrong setsockopt() parameters Parameters were created using wrong C types, which caused them to be of wrong size on some architectures, causing problems. The problem with SO_RCVLOWAT was found on s390 (big endian), while x86-64 didn't show it. After the fix, all tests pass on s390. Then Stefano Garzarella pointed out that SO_VM_SOCKETS_* calls might have a similar problem, which turned out to be true, hence, the second patch. Changes for v8: - Fix whitespace warnings from "checkpatch.pl --strict" - Add maintainers to Cc: Changes for v7: - Rebase on top of https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net.git - Add the "net" tags to the subjects Changes for v6: - rework the patch gregkh#3 to avoid creating a new file for new functions, and exclude vsock_perf from calling the new functions. - add "Reviewed-by:" to the patch gregkh#2. Changes for v5: - in the patch gregkh#2 replace the introduced uint64_t with unsigned long long to match documentation - add a patch gregkh#3 that verifies every setsockopt() call. Changes for v4: - add "Reviewed-by:" to the first patch, and add a second patch fixing SO_VM_SOCKETS_* calls, which depends on the first one (hence, it's now a patch series.) Changes for v3: - fix the same problem in vsock_perf and update commit message Changes for v2: - add "Fixes:" lines to the commit message ==================== Link: https://patch.msgid.link/[email protected] Signed-off-by: Paolo Abeni <[email protected]>

Hou Tao says: ==================== This patch set fixes several issues for LPM trie. These issues were found during adding new test cases or were reported by syzbot. The patch set is structured as follows: Patch gregkh#1~gregkh#2 are clean-ups for lpm_trie_update_elem(). Patch gregkh#3 handles BPF_EXIST and BPF_NOEXIST correctly for LPM trie. Patch gregkh#4 fixes the accounting of n_entries when doing in-place update. Patch gregkh#5 fixes the exact match condition in trie_get_next_key() and it may skip keys when the passed key is not found in the map. Patch gregkh#6~gregkh#7 switch from kmalloc() to bpf memory allocator for LPM trie to fix several lock order warnings reported by syzbot. It also enables raw_spinlock_t for LPM trie again. After these changes, the LPM trie will be closer to being usable in any context (though the reentrance check of trie->lock is still missing, but it is on my todo list). Patch gregkh#8: move test_lpm_map to map_tests to make it run regularly. Patch gregkh#9: add test cases for the issues fixed by patch gregkh#3~gregkh#5. Please see individual patches for more details. Comments are always welcome. Change Log: v3: * patch gregkh#2: remove the unnecessary NULL-init for im_node * patch gregkh#6: alloc the leaf node before disabling IRQ to low the possibility of -ENOMEM when leaf_size is large; Free these nodes outside the trie lock (Suggested by Alexei) * collect review and ack tags (Thanks for Toke & Daniel) v2: https://lore.kernel.org/bpf/[email protected]/ * collect review tags (Thanks for Toke) * drop "Add bpf_mem_cache_is_mergeable() helper" patch * patch gregkh#3~gregkh#4: add fix tag * patch gregkh#4: rename the helper to trie_check_add_elem() and increase n_entries in it. * patch gregkh#6: use one bpf mem allocator and update commit message to clarify that using bpf mem allocator is more appropriate. * patch gregkh#7: update commit message to add the possible max running time for update operation. * patch gregkh#9: update commit message to specify the purpose of these test cases. v1: https://lore.kernel.org/bpf/[email protected]/ ==================== Link: https://lore.kernel.org/all/[email protected]/ Signed-off-by: Alexei Starovoitov <[email protected]>

Kernel will hang on destroy admin_q while we create ctrl failed, such as following calltrace: PID: 23644 TASK: ff2d52b40f439fc0 CPU: 2 COMMAND: "nvme" #0 [ff61d23de260fb78] __schedule at ffffffff8323bc15 gregkh#1 [ff61d23de260fc08] schedule at ffffffff8323c014 gregkh#2 [ff61d23de260fc28] blk_mq_freeze_queue_wait at ffffffff82a3dba1 gregkh#3 [ff61d23de260fc78] blk_freeze_queue at ffffffff82a4113a gregkh#4 [ff61d23de260fc90] blk_cleanup_queue at ffffffff82a33006 gregkh#5 [ff61d23de260fcb0] nvme_rdma_destroy_admin_queue at ffffffffc12686ce gregkh#6 [ff61d23de260fcc8] nvme_rdma_setup_ctrl at ffffffffc1268ced gregkh#7 [ff61d23de260fd28] nvme_rdma_create_ctrl at ffffffffc126919b gregkh#8 [ff61d23de260fd68] nvmf_dev_write at ffffffffc024f362 gregkh#9 [ff61d23de260fe38] vfs_write at ffffffff827d5f25 RIP: 00007fda7891d574 RSP: 00007ffe2ef06958 RFLAGS: 00000202 RAX: ffffffffffffffda RBX: 000055e8122a4d90 RCX: 00007fda7891d574 RDX: 000000000000012b RSI: 000055e8122a4d90 RDI: 0000000000000004 RBP: 00007ffe2ef079c0 R8: 000000000000012b R9: 000055e8122a4d90 R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000000004 R13: 000055e8122923c0 R14: 000000000000012b R15: 00007fda78a54500 ORIG_RAX: 0000000000000001 CS: 0033 SS: 002b This due to we have quiesced admi_q before cancel requests, but forgot to unquiesce before destroy it, as a result we fail to drain the pending requests, and hang on blk_mq_freeze_queue_wait() forever. Here try to reuse nvme_rdma_teardown_admin_queue() to fix this issue and simplify the code. Fixes: 958dc1d ("nvme-rdma: add clean action for failed reconnection") Reported-by: Yingfu.zhou <[email protected]> Signed-off-by: Chunguang.xu <[email protected]> Signed-off-by: Yue.zhao <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Reviewed-by: Hannes Reinecke <[email protected]> Signed-off-by: Keith Busch <[email protected]>

[ Upstream commit 953e549 ] Lockdep gives a false positive splat as it can't distinguish the lock which is taken by different IRQ descriptors from different IRQ chips that are organized in a way of a hierarchy: ====================================================== WARNING: possible circular locking dependency detected 6.12.0-rc5-next-20241101-00148-g9fabf8160b53 #562 Tainted: G W ------------------------------------------------------ modprobe/141 is trying to acquire lock: ffff899446947868 (intel_soc_pmic_bxtwc:502:(&bxtwc_regmap_config)->lock){+.+.}-{4:4}, at: regmap_update_bits_base+0x33/0x90 but task is already holding lock: ffff899446947c68 (&d->lock){+.+.}-{4:4}, at: __setup_irq+0x682/0x790 which lock already depends on the new lock. -> #3 (&d->lock){+.+.}-{4:4}: -> #2 (&desc->request_mutex){+.+.}-{4:4}: -> #1 (ipclock){+.+.}-{4:4}: -> #0 (intel_soc_pmic_bxtwc:502:(&bxtwc_regmap_config)->lock){+.+.}-{4:4}: Chain exists of: intel_soc_pmic_bxtwc:502:(&bxtwc_regmap_config)->lock --> &desc->request_mutex --> &d->lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&d->lock); lock(&desc->request_mutex); lock(&d->lock); lock(intel_soc_pmic_bxtwc:502:(&bxtwc_regmap_config)->lock); *** DEADLOCK *** 3 locks held by modprobe/141: #0: ffff8994419368f8 (&dev->mutex){....}-{4:4}, at: __driver_attach+0xf6/0x250 #1: ffff89944690b250 (&desc->request_mutex){+.+.}-{4:4}, at: __setup_irq+0x1a2/0x790 #2: ffff899446947c68 (&d->lock){+.+.}-{4:4}, at: __setup_irq+0x682/0x790 Set a lockdep class when we map the IRQ so that it doesn't warn about a lockdep bug that doesn't exist. Fixes: 4af8be6 ("regmap: Convert regmap_irq to use irq_domain") Signed-off-by: Andy Shevchenko <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Mark Brown <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

This reworks hci_cb_list to not use mutex hci_cb_list_lock to avoid bugs like the bellow: BUG: sleeping function called from invalid context at kernel/locking/mutex.c:585 in_atomic(): 0, irqs_disabled(): 0, non_block: 0, pid: 5070, name: kworker/u9:2 preempt_count: 0, expected: 0 RCU nest depth: 1, expected: 0 4 locks held by kworker/u9:2/5070: #0: ffff888015be3948 ((wq_completion)hci0#2){+.+.}-{0:0}, at: process_one_work kernel/workqueue.c:3229 [inline] #0: ffff888015be3948 ((wq_completion)hci0#2){+.+.}-{0:0}, at: process_scheduled_works+0x8e0/0x1770 kernel/workqueue.c:3335 gregkh#1: ffffc90003b6fd00 ((work_completion)(&hdev->rx_work)){+.+.}-{0:0}, at: process_one_work kernel/workqueue.c:3230 [inline] gregkh#1: ffffc90003b6fd00 ((work_completion)(&hdev->rx_work)){+.+.}-{0:0}, at: process_scheduled_works+0x91b/0x1770 kernel/workqueue.c:3335 gregkh#2: ffff8880665d0078 (&hdev->lock){+.+.}-{3:3}, at: hci_le_create_big_complete_evt+0xcf/0xae0 net/bluetooth/hci_event.c:6914 gregkh#3: ffffffff8e132020 (rcu_read_lock){....}-{1:2}, at: rcu_lock_acquire include/linux/rcupdate.h:298 [inline] gregkh#3: ffffffff8e132020 (rcu_read_lock){....}-{1:2}, at: rcu_read_lock include/linux/rcupdate.h:750 [inline] gregkh#3: ffffffff8e132020 (rcu_read_lock){....}-{1:2}, at: hci_le_create_big_complete_evt+0xdb/0xae0 net/bluetooth/hci_event.c:6915 CPU: 0 PID: 5070 Comm: kworker/u9:2 Not tainted 6.8.0-syzkaller-08073-g480e035fc4c7 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024 Workqueue: hci0 hci_rx_work Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:114 __might_resched+0x5d4/0x780 kernel/sched/core.c:10187 __mutex_lock_common kernel/locking/mutex.c:585 [inline] __mutex_lock+0xc1/0xd70 kernel/locking/mutex.c:752 hci_connect_cfm include/net/bluetooth/hci_core.h:2004 [inline] hci_le_create_big_complete_evt+0x3d9/0xae0 net/bluetooth/hci_event.c:6939 hci_event_func net/bluetooth/hci_event.c:7514 [inline] hci_event_packet+0xa53/0x1540 net/bluetooth/hci_event.c:7569 hci_rx_work+0x3e8/0xca0 net/bluetooth/hci_core.c:4171 process_one_work kernel/workqueue.c:3254 [inline] process_scheduled_works+0xa00/0x1770 kernel/workqueue.c:3335 worker_thread+0x86d/0xd70 kernel/workqueue.c:3416 kthread+0x2f0/0x390 kernel/kthread.c:388 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:243 </TASK> Reported-by: [email protected] Tested-by: [email protected] Closes: https://syzkaller.appspot.com/bug?extid=2fb0835e0c9cefc34614 Signed-off-by: Luiz Augusto von Dentz <[email protected]>

This fixes the circular locking dependency warning below, by releasing the socket lock before enterning iso_listen_bis, to avoid any potential deadlock with hdev lock. [ 75.307983] ====================================================== [ 75.307984] WARNING: possible circular locking dependency detected [ 75.307985] 6.12.0-rc6+ #22 Not tainted [ 75.307987] ------------------------------------------------------ [ 75.307987] kworker/u81:2/2623 is trying to acquire lock: [ 75.307988] ffff8fde1769da58 (sk_lock-AF_BLUETOOTH-BTPROTO_ISO) at: iso_connect_cfm+0x253/0x840 [bluetooth] [ 75.308021] but task is already holding lock: [ 75.308022] ffff8fdd61a10078 (&hdev->lock) at: hci_le_per_adv_report_evt+0x47/0x2f0 [bluetooth] [ 75.308053] which lock already depends on the new lock. [ 75.308054] the existing dependency chain (in reverse order) is: [ 75.308055] -> gregkh#1 (&hdev->lock){+.+.}-{3:3}: [ 75.308057] __mutex_lock+0xad/0xc50 [ 75.308061] mutex_lock_nested+0x1b/0x30 [ 75.308063] iso_sock_listen+0x143/0x5c0 [bluetooth] [ 75.308085] __sys_listen_socket+0x49/0x60 [ 75.308088] __x64_sys_listen+0x4c/0x90 [ 75.308090] x64_sys_call+0x2517/0x25f0 [ 75.308092] do_syscall_64+0x87/0x150 [ 75.308095] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 75.308098] -> #0 (sk_lock-AF_BLUETOOTH-BTPROTO_ISO){+.+.}-{0:0}: [ 75.308100] __lock_acquire+0x155e/0x25f0 [ 75.308103] lock_acquire+0xc9/0x300 [ 75.308105] lock_sock_nested+0x32/0x90 [ 75.308107] iso_connect_cfm+0x253/0x840 [bluetooth] [ 75.308128] hci_connect_cfm+0x6c/0x190 [bluetooth] [ 75.308155] hci_le_per_adv_report_evt+0x27b/0x2f0 [bluetooth] [ 75.308180] hci_le_meta_evt+0xe7/0x200 [bluetooth] [ 75.308206] hci_event_packet+0x21f/0x5c0 [bluetooth] [ 75.308230] hci_rx_work+0x3ae/0xb10 [bluetooth] [ 75.308254] process_one_work+0x212/0x740 [ 75.308256] worker_thread+0x1bd/0x3a0 [ 75.308258] kthread+0xe4/0x120 [ 75.308259] ret_from_fork+0x44/0x70 [ 75.308261] ret_from_fork_asm+0x1a/0x30 [ 75.308263] other info that might help us debug this: [ 75.308264] Possible unsafe locking scenario: [ 75.308264] CPU0 CPU1 [ 75.308265] ---- ---- [ 75.308265] lock(&hdev->lock); [ 75.308267] lock(sk_lock- AF_BLUETOOTH-BTPROTO_ISO); [ 75.308268] lock(&hdev->lock); [ 75.308269] lock(sk_lock-AF_BLUETOOTH-BTPROTO_ISO); [ 75.308270] *** DEADLOCK *** [ 75.308271] 4 locks held by kworker/u81:2/2623: [ 75.308272] #0: ffff8fdd66e52148 ((wq_completion)hci0#2){+.+.}-{0:0}, at: process_one_work+0x443/0x740 [ 75.308276] gregkh#1: ffffafb488b7fe48 ((work_completion)(&hdev->rx_work)), at: process_one_work+0x1ce/0x740 [ 75.308280] gregkh#2: ffff8fdd61a10078 (&hdev->lock){+.+.}-{3:3} at: hci_le_per_adv_report_evt+0x47/0x2f0 [bluetooth] [ 75.308304] gregkh#3: ffffffffb6ba4900 (rcu_read_lock){....}-{1:2}, at: hci_connect_cfm+0x29/0x190 [bluetooth] Fixes: 02171da ("Bluetooth: ISO: Add hcon for listening bis sk") Signed-off-by: Iulia Tanasescu <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]>

Its used from trace__run(), for the 'perf trace' live mode, i.e. its strace-like, non-perf.data file processing mode, the most common one. The trace__run() function will set trace->host using machine__new_host() that is supposed to give a machine instance representing the running machine, and since we'll use perf_env__arch_strerrno() to get the right errno -> string table, we need to use machine->env, so initialize it in machine__new_host(). Before the patch: (gdb) run trace --errno-summary -a sleep 1 <SNIP> Summary of events: gvfs-afc-volume (3187), 2 events, 0.0% syscall calls errors total min avg max stddev (msec) (msec) (msec) (msec) (%) --------------- -------- ------ -------- --------- --------- --------- ------ pselect6 1 0 0.000 0.000 0.000 0.000 0.00% GUsbEventThread (3519), 2 events, 0.0% syscall calls errors total min avg max stddev (msec) (msec) (msec) (msec) (%) --------------- -------- ------ -------- --------- --------- --------- ------ poll 1 0 0.000 0.000 0.000 0.000 0.00% <SNIP> Program received signal SIGSEGV, Segmentation fault. 0x00000000005caba0 in perf_env__arch_strerrno (env=0x0, err=110) at util/env.c:478 478 if (env->arch_strerrno == NULL) (gdb) bt #0 0x00000000005caba0 in perf_env__arch_strerrno (env=0x0, err=110) at util/env.c:478 gregkh#1 0x00000000004b75d2 in thread__dump_stats (ttrace=0x14f58f0, trace=0x7fffffffa5b0, fp=0x7ffff6ff74e0 <_IO_2_1_stderr_>) at builtin-trace.c:4673 gregkh#2 0x00000000004b78bf in trace__fprintf_thread (fp=0x7ffff6ff74e0 <_IO_2_1_stderr_>, thread=0x10fa0b0, trace=0x7fffffffa5b0) at builtin-trace.c:4708 gregkh#3 0x00000000004b7ad9 in trace__fprintf_thread_summary (trace=0x7fffffffa5b0, fp=0x7ffff6ff74e0 <_IO_2_1_stderr_>) at builtin-trace.c:4747 gregkh#4 0x00000000004b656e in trace__run (trace=0x7fffffffa5b0, argc=2, argv=0x7fffffffde60) at builtin-trace.c:4456 gregkh#5 0x00000000004ba43e in cmd_trace (argc=2, argv=0x7fffffffde60) at builtin-trace.c:5487 gregkh#6 0x00000000004c0414 in run_builtin (p=0xec3068 <commands+648>, argc=5, argv=0x7fffffffde60) at perf.c:351 gregkh#7 0x00000000004c06bb in handle_internal_command (argc=5, argv=0x7fffffffde60) at perf.c:404 gregkh#8 0x00000000004c0814 in run_argv (argcp=0x7fffffffdc4c, argv=0x7fffffffdc40) at perf.c:448 gregkh#9 0x00000000004c0b5d in main (argc=5, argv=0x7fffffffde60) at perf.c:560 (gdb) After: root@number:~# perf trace -a --errno-summary sleep 1 <SNIP> pw-data-loop (2685), 1410 events, 16.0% syscall calls errors total min avg max stddev (msec) (msec) (msec) (msec) (%) --------------- -------- ------ -------- --------- --------- --------- ------ epoll_wait 188 0 983.428 0.000 5.231 15.595 8.68% ioctl 94 0 0.811 0.004 0.009 0.016 2.82% read 188 0 0.322 0.001 0.002 0.006 5.15% write 141 0 0.280 0.001 0.002 0.018 8.39% timerfd_settime 94 0 0.138 0.001 0.001 0.007 6.47% gnome-control-c (179406), 1848 events, 20.9% syscall calls errors total min avg max stddev (msec) (msec) (msec) (msec) (%) --------------- -------- ------ -------- --------- --------- --------- ------ poll 222 0 959.577 0.000 4.322 21.414 11.40% recvmsg 150 0 0.539 0.001 0.004 0.013 5.12% write 300 0 0.442 0.001 0.001 0.007 3.29% read 150 0 0.183 0.001 0.001 0.009 5.53% getpid 102 0 0.101 0.000 0.001 0.008 7.82% root@number:~# Fixes: 54373b5 ("perf env: Introduce perf_env__arch_strerrno()") Reported-by: Veronika Molnarova <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Acked-by: Veronika Molnarova <[email protected]> Acked-by: Michael Petlan <[email protected]> Tested-by: Michael Petlan <[email protected]> Link: https://lore.kernel.org/r/Z0XffUgNSv_9OjOi@x1 Signed-off-by: Namhyung Kim <[email protected]>

Relicense as SSPL

3941433

This is crucial to be able to host the brand new doubled-down source-open Elasticsearch on Linux. Signed-off-by: Stuart Reinhild

gregkh closed this Jan 28, 2021

gregkh reviewed Jan 28, 2021

View reviewed changes

anchalag referenced this pull request in amazonlinux/linux Feb 7, 2021

Merge tag 'kvmarm-fixes-5.11-3' of git://git.kernel.org/pub/scm/linux…

074489b

…/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 fixes for 5.11, take #3 - Avoid clobbering extra registers on initialisation

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Relicense as SSPL #3

Relicense as SSPL #3

stuardreinhild commented Jan 28, 2021

gregkh left a comment

stuardreinhild commented Jan 28, 2021

gregkh commented Jan 28, 2021

Relicense as SSPL #3

Relicense as SSPL #3

Conversation

stuardreinhild commented Jan 28, 2021

gregkh left a comment

Choose a reason for hiding this comment

stuardreinhild commented Jan 28, 2021

gregkh commented Jan 28, 2021