Change the loopback interface netmask from /8 to /16 #5353
Merged
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
|
retest vsimage please |
prsunny
reviewed
Sep 11, 2020
Staphylo
force-pushed
the
master-loopback-netmask
branch
from
4abc2c2 to
9b41045
Compare
santhosh-kt
pushed a commit
to santhosh-kt/sonic-buildimage
that referenced
this pull request
Feb 25, 2021
As per the VOQ HLDs, internal networking between the linecards and supervisor is required within a chassis. Allocating 127.X/16 subnets for private communication within a chassis is a good candidate. It doesn't require any external IP allocation as well as ensure that the traffic will not leave the chassis. References: sonic-net/SONiC#622 sonic-net/SONiC#639 **- How I did it** Changed the `interfaces.j2` file to add `127.0.0.1/16` as the `lo` ip address. Then once the interface is up, the post-up command removes the `127.0.0.1/8` ip address. The order in which the netmask change is made matters for `127.0.0.1` to be reachable at all times. **- How to verify it** ``` root@sonic:~# ip address show dev lo 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/16 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever ``` Co-authored-by: Baptiste Covolato <[email protected]>
5 tasks
saiarcot895
added a commit
to saiarcot895/sonic-buildimage
that referenced
this pull request
May 15, 2023
With sonic-net#5353, 127.0.0.1/16 was added to the lo interface, and then 127.0.0.1/8 was removed. However, when bringing down the lo interface, like during a config reload, 127.0.0.1/16 gets removed, but 127.0.0.1/8 isn't added back to the interface. This means that there's a period of time where 127.0.0.1 is not available at all, and services that need to connect to 127.0.01 (such as for redis DB) will fail. To fix this, when going down, add 127.0.0.1/8. Add this address before the existing configuration gets removed, so that 127.0.0.1 is available at all times. Note that running `ifdown lo` doesn't actually bring down the loopback interface; the interface always stays "physically" up. Signed-off-by: Saikrishna Arcot <[email protected]>
10 tasks
yxieca
pushed a commit
that referenced
this pull request
Jun 14, 2023
* Re-add 127.0.0.1/8 when bringing down the interfaces With #5353, 127.0.0.1/16 was added to the lo interface, and then 127.0.0.1/8 was removed. However, when bringing down the lo interface, like during a config reload, 127.0.0.1/16 gets removed, but 127.0.0.1/8 isn't added back to the interface. This means that there's a period of time where 127.0.0.1 is not available at all, and services that need to connect to 127.0.01 (such as for redis DB) will fail. To fix this, when going down, add 127.0.0.1/8. Add this address before the existing configuration gets removed, so that 127.0.0.1 is available at all times. Note that running `ifdown lo` doesn't actually bring down the loopback interface; the interface always stays "physically" up. Signed-off-by: Saikrishna Arcot <[email protected]>
mssonicbld
pushed a commit
to mssonicbld/sonic-buildimage
that referenced
this pull request
Jun 14, 2023
* Re-add 127.0.0.1/8 when bringing down the interfaces With sonic-net#5353, 127.0.0.1/16 was added to the lo interface, and then 127.0.0.1/8 was removed. However, when bringing down the lo interface, like during a config reload, 127.0.0.1/16 gets removed, but 127.0.0.1/8 isn't added back to the interface. This means that there's a period of time where 127.0.0.1 is not available at all, and services that need to connect to 127.0.01 (such as for redis DB) will fail. To fix this, when going down, add 127.0.0.1/8. Add this address before the existing configuration gets removed, so that 127.0.0.1 is available at all times. Note that running `ifdown lo` doesn't actually bring down the loopback interface; the interface always stays "physically" up. Signed-off-by: Saikrishna Arcot <[email protected]>
10 tasks
saiarcot895
added a commit
to saiarcot895/sonic-buildimage
that referenced
this pull request
Jun 14, 2023
* Re-add 127.0.0.1/8 when bringing down the interfaces With sonic-net#5353, 127.0.0.1/16 was added to the lo interface, and then 127.0.0.1/8 was removed. However, when bringing down the lo interface, like during a config reload, 127.0.0.1/16 gets removed, but 127.0.0.1/8 isn't added back to the interface. This means that there's a period of time where 127.0.0.1 is not available at all, and services that need to connect to 127.0.01 (such as for redis DB) will fail. To fix this, when going down, add 127.0.0.1/8. Add this address before the existing configuration gets removed, so that 127.0.0.1 is available at all times. Note that running `ifdown lo` doesn't actually bring down the loopback interface; the interface always stays "physically" up. Signed-off-by: Saikrishna Arcot <[email protected]>
10 tasks
10 tasks
yxieca
pushed a commit
that referenced
this pull request
Jun 14, 2023
* Re-add 127.0.0.1/8 when bringing down the interfaces With #5353, 127.0.0.1/16 was added to the lo interface, and then 127.0.0.1/8 was removed. However, when bringing down the lo interface, like during a config reload, 127.0.0.1/16 gets removed, but 127.0.0.1/8 isn't added back to the interface. This means that there's a period of time where 127.0.0.1 is not available at all, and services that need to connect to 127.0.01 (such as for redis DB) will fail. To fix this, when going down, add 127.0.0.1/8. Add this address before the existing configuration gets removed, so that 127.0.0.1 is available at all times. Note that running `ifdown lo` doesn't actually bring down the loopback interface; the interface always stays "physically" up. Signed-off-by: Saikrishna Arcot <[email protected]>
mssonicbld
pushed a commit
that referenced
this pull request
Jun 16, 2023
* Re-add 127.0.0.1/8 when bringing down the interfaces With #5353, 127.0.0.1/16 was added to the lo interface, and then 127.0.0.1/8 was removed. However, when bringing down the lo interface, like during a config reload, 127.0.0.1/16 gets removed, but 127.0.0.1/8 isn't added back to the interface. This means that there's a period of time where 127.0.0.1 is not available at all, and services that need to connect to 127.0.01 (such as for redis DB) will fail. To fix this, when going down, add 127.0.0.1/8. Add this address before the existing configuration gets removed, so that 127.0.0.1 is available at all times. Note that running `ifdown lo` doesn't actually bring down the loopback interface; the interface always stays "physically" up. Signed-off-by: Saikrishna Arcot <[email protected]>
sonic-otn
pushed a commit
to sonic-otn/sonic-buildimage
that referenced
this pull request
Sep 20, 2023
* Re-add 127.0.0.1/8 when bringing down the interfaces With sonic-net#5353, 127.0.0.1/16 was added to the lo interface, and then 127.0.0.1/8 was removed. However, when bringing down the lo interface, like during a config reload, 127.0.0.1/16 gets removed, but 127.0.0.1/8 isn't added back to the interface. This means that there's a period of time where 127.0.0.1 is not available at all, and services that need to connect to 127.0.01 (such as for redis DB) will fail. To fix this, when going down, add 127.0.0.1/8. Add this address before the existing configuration gets removed, so that 127.0.0.1 is available at all times. Note that running `ifdown lo` doesn't actually bring down the loopback interface; the interface always stays "physically" up. Signed-off-by: Saikrishna Arcot <[email protected]>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
- Why I did it
As per the VOQ HLDs, internal networking between the linecards and supervisor is required within a chassis.
Allocating 127.X/16 subnets for private communication within a chassis is a good candidate.
It doesn't require any external IP allocation as well as ensure that the traffic will not leave the chassis.
References:
sonic-net/SONiC#622
sonic-net/SONiC#639
- How I did it
Changed the
interfaces.j2file to add127.0.0.1/16as theloip address.Then once the interface is up, the post-up command removes the
127.0.0.1/8ip address.The order in which the netmask change is made matters for
127.0.0.1to be reachable at all times.- How to verify it
- Which release branch to backport (provide reason below if selected)
- Description for the changelog
Change the loopback interface netmask from /8 to /16