[Mellanox] Update SDK/FW/SAI to 4.6.1020/2012.1020/SAIBuild2305.25.0.3 #16096
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Signed-off-by: Kebo Liu <[email protected]>
Signed-off-by: Kebo Liu <[email protected]>
|
/azpw run Azure.sonic-buildimage |
|
/AzurePipelines run Azure.sonic-buildimage |
|
Azure Pipelines successfully started running 1 pipeline(s). |
Signed-off-by: Kebo Liu <[email protected]>
Signed-off-by: Kebo Liu <[email protected]>
keboliu
changed the title
|
/azpw run Azure.sonic-buildimage |
|
/AzurePipelines run Azure.sonic-buildimage |
|
Azure Pipelines successfully started running 1 pipeline(s). |
liat-grozovik
approved these changes
Aug 15, 2023
Merged
11 tasks
keboliu
added a commit
to keboliu/sonic-buildimage
that referenced
this pull request
Aug 16, 2023
…1020/SAIBuild2211.25.1.0 (sonic-net#16096)
StormLiangMS
pushed a commit
that referenced
this pull request
Aug 20, 2023
…211.25.1.0 (#16096) (#16095) This is to backport #16096 Why I did it SONiC changes: Support Spectrum4 ASIC FW binary building. Support new SDK sx-obj-desc lib building since new SAI need it. Remove SX_SCEW debian package from Mellanox SDK build since we are no longer using it (we use libxml2 instead). Update SAI, SDK, FW to version 4.6.1020/2012.1020/SAIBuild2211.25.1.0 SDK/FW bug fixes In SPC-1 platforms: Fastboot mode is not operational for Split port with Force mode in 50G speed SFP modules are kept in disabled state after set LPM (low power mode) on/off for at least 3 minutes. When preforming fast boot from an old SDK version (currently installed) to a newer one (target version), and the system was initially loaded with a new SDK version (past version), and the system has not been wiped, under specific conditions, the fast boot would use the past version's data and may fail. SDK/FW Features On SN2700 all ports can support y cable by credo SAI bug Fixes When creating an ACL rule with SAI_ACL_ENTRY_ATTR_FIELD_SRC_IP/SAI_ACL_ENTRY_ATTR_FIELD_DST_IP enabled, and then disabling the field by setting enable=false, a match on L3_type=IPv4 will remain programmed for the rule Issue resolved after the fix Allow the max scale of virtual routers to be configure for SPC-1, SPC-2, SPC-3 when fastboot enable Remove default hash key of SRC_MAC, DST_MAC and ETH_TYPE SAI features Port init profile Dual ToR Active-Standby | Additional MAC support Work item tracking Microsoft ADO (number only): How I did it Update SDK/FW/SAI make files How to verify it Run full sonic-mgmt regression on Mellanox platform
|
@keboliu PR conflicts with 202305 branch |
11 tasks
keboliu
added a commit
to keboliu/sonic-buildimage
that referenced
this pull request
Aug 28, 2023
sonic-net#16096) SONiC changes: 1. Support Spectrum4 ASIC FW binary building. 2. Support new SDK sx-obj-desc lib building since new SAI need it. 3. Remove SX_SCEW debian package from Mellanox SDK build since we are no longer using it (we use libxml2 instead). 4. Update SAI, SDK, FW to version 4.6.1020/2012.1020/SAIBuild2305.25.0.3 SDK/FW bug fixes 1. In SPC-1 platforms: Fastboot mode is not operational for Split port with Force mode in 50G speed SFP modules are kept in disabled state after set LPM (low power mode) on/off for at least 3 minutes. 2. When preforming fast boot from an old SDK version (currently installed) to a newer one (target version), and the system was initially loaded with a new SDK version (past version), and the system has not been wiped, under specific conditions, the fast boot would use the past version's data and may fail. SDK/FW Features 1. On SN2700 all ports can support y cable by credo SAI bug Fixes 1. When creating an ACL rule with SAI_ACL_ENTRY_ATTR_FIELD_SRC_IP/SAI_ACL_ENTRY_ATTR_FIELD_DST_IP enabled, and then disabling the field by setting enable=false, a match on L3_type=IPv4 will remain programmed for the rule Issue resolved after the fix 2. Allow the max scale of virtual routers to be configure for SPC-1, SPC-2, SPC-3 when fastboot enable 3. Remove default hash key of SRC_MAC, DST_MAC and ETH_TYPE SAI features 1. Port init profile - How I did it Update SDK/FW/SAI make files - How to verify it Run full sonic-mgmt regression on Mellanox platform Signed-off-by: Kebo Liu <[email protected]> Conflicts: platform/mellanox/mlnx-sai.mk
Merged
11 tasks
|
@keboliu conflict, need separate PR for cherry-pick |
StormLiangMS
pushed a commit
that referenced
this pull request
Sep 10, 2023
…05.25.0.3(#16096) (#16298) * [Mellanox] Update SDK/FW/SAI to 4.6.1020/2012.1020/SAIBuild2305.25.0.3 (#16096) SONiC changes: 1. Support Spectrum4 ASIC FW binary building. 2. Support new SDK sx-obj-desc lib building since new SAI need it. 3. Remove SX_SCEW debian package from Mellanox SDK build since we are no longer using it (we use libxml2 instead). 4. Update SAI, SDK, FW to version 4.6.1020/2012.1020/SAIBuild2305.25.0.3 SDK/FW bug fixes 1. In SPC-1 platforms: Fastboot mode is not operational for Split port with Force mode in 50G speed SFP modules are kept in disabled state after set LPM (low power mode) on/off for at least 3 minutes. 2. When preforming fast boot from an old SDK version (currently installed) to a newer one (target version), and the system was initially loaded with a new SDK version (past version), and the system has not been wiped, under specific conditions, the fast boot would use the past version's data and may fail. SDK/FW Features 1. On SN2700 all ports can support y cable by credo SAI bug Fixes 1. When creating an ACL rule with SAI_ACL_ENTRY_ATTR_FIELD_SRC_IP/SAI_ACL_ENTRY_ATTR_FIELD_DST_IP enabled, and then disabling the field by setting enable=false, a match on L3_type=IPv4 will remain programmed for the rule Issue resolved after the fix 2. Allow the max scale of virtual routers to be configure for SPC-1, SPC-2, SPC-3 when fastboot enable 3. Remove default hash key of SRC_MAC, DST_MAC and ETH_TYPE SAI features 1. Port init profile - How I did it Update SDK/FW/SAI make files - How to verify it Run full sonic-mgmt regression on Mellanox platform Signed-off-by: Kebo Liu <[email protected]> Conflicts: platform/mellanox/mlnx-sai.mk * Fix issue: unprintable character is rendered when handling comments in j2 Use "{#-" and "-#}" to mark comments in jinja template Signed-off-by: Stephen Sun <[email protected]> --------- Signed-off-by: Stephen Sun <[email protected]> Co-authored-by: Stephen Sun <[email protected]>
sonic-otn
pushed a commit
to sonic-otn/sonic-buildimage
that referenced
this pull request
Sep 20, 2023
sonic-net#16096) SONiC changes: 1. Support Spectrum4 ASIC FW binary building. 2. Support new SDK sx-obj-desc lib building since new SAI need it. 3. Remove SX_SCEW debian package from Mellanox SDK build since we are no longer using it (we use libxml2 instead). 4. Update SAI, SDK, FW to version 4.6.1020/2012.1020/SAIBuild2305.25.0.3 SDK/FW bug fixes 1. In SPC-1 platforms: Fastboot mode is not operational for Split port with Force mode in 50G speed SFP modules are kept in disabled state after set LPM (low power mode) on/off for at least 3 minutes. 2. When preforming fast boot from an old SDK version (currently installed) to a newer one (target version), and the system was initially loaded with a new SDK version (past version), and the system has not been wiped, under specific conditions, the fast boot would use the past version's data and may fail. SDK/FW Features 1. On SN2700 all ports can support y cable by credo SAI bug Fixes 1. When creating an ACL rule with SAI_ACL_ENTRY_ATTR_FIELD_SRC_IP/SAI_ACL_ENTRY_ATTR_FIELD_DST_IP enabled, and then disabling the field by setting enable=false, a match on L3_type=IPv4 will remain programmed for the rule Issue resolved after the fix 2. Allow the max scale of virtual routers to be configure for SPC-1, SPC-2, SPC-3 when fastboot enable 3. Remove default hash key of SRC_MAC, DST_MAC and ETH_TYPE SAI features 1. Port init profile - How I did it Update SDK/FW/SAI make files - How to verify it Run full sonic-mgmt regression on Mellanox platform Signed-off-by: Kebo Liu <[email protected]>
noaOrMlnx
pushed a commit
to noaOrMlnx/sonic-buildimage
that referenced
this pull request
Sep 20, 2023
sonic-net#16096) SONiC changes: 1. Support Spectrum4 ASIC FW binary building. 2. Support new SDK sx-obj-desc lib building since new SAI need it. 3. Remove SX_SCEW debian package from Mellanox SDK build since we are no longer using it (we use libxml2 instead). 4. Update SAI, SDK, FW to version 4.6.1020/2012.1020/SAIBuild2305.25.0.3 SDK/FW bug fixes 1. In SPC-1 platforms: Fastboot mode is not operational for Split port with Force mode in 50G speed SFP modules are kept in disabled state after set LPM (low power mode) on/off for at least 3 minutes. 2. When preforming fast boot from an old SDK version (currently installed) to a newer one (target version), and the system was initially loaded with a new SDK version (past version), and the system has not been wiped, under specific conditions, the fast boot would use the past version's data and may fail. SDK/FW Features 1. On SN2700 all ports can support y cable by credo SAI bug Fixes 1. When creating an ACL rule with SAI_ACL_ENTRY_ATTR_FIELD_SRC_IP/SAI_ACL_ENTRY_ATTR_FIELD_DST_IP enabled, and then disabling the field by setting enable=false, a match on L3_type=IPv4 will remain programmed for the rule Issue resolved after the fix 2. Allow the max scale of virtual routers to be configure for SPC-1, SPC-2, SPC-3 when fastboot enable 3. Remove default hash key of SRC_MAC, DST_MAC and ETH_TYPE SAI features 1. Port init profile - How I did it Update SDK/FW/SAI make files - How to verify it Run full sonic-mgmt regression on Mellanox platform Signed-off-by: Kebo Liu <[email protected]>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Why I did it
SONiC changes:
SDK/FW bug fixes
SDK/FW Features
SAI bug Fixes
SAI features
Work item tracking
How I did it
Update SDK/FW/SAI make files
How to verify it
Run full sonic-mgmt regression on Mellanox platform
Which release branch to backport (provide reason below if selected)
Tested branch (Please provide the tested image version)
Description for the changelog
Link to config_db schema for YANG module changes
A picture of a cute animal (not mandatory but encouraged)