Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

onie installation failure #630

Closed
lguohan opened this issue May 24, 2017 · 4 comments
Closed

onie installation failure #630

lguohan opened this issue May 24, 2017 · 4 comments
Assignees

Comments

@lguohan
Copy link
Collaborator

lguohan commented May 24, 2017

I see this once. If I reboot onie and re-install the same image, it succeeds. This is on Dell S6000 box.

ONIE:/ # onie-nos-install http://100.127.20.23/installer/ACS/sonic-broadcom-lgh.
bin
discover: installer mode detected.
Stopping: discover... done.
Notice:  Invalid TLV header found.  Using default contents.
Notice:  Invalid TLV checksum found.  Using default contents.
ONIE: Unable to find 'Base MAC Address' TLV in EEPROM data.
Notice:  Invalid TLV header found.  Using default contents.
Notice:  Invalid TLV checksum found.  Using default contents.
ONIE: Unable to find 'Serial Number' TLV in EEPROM data.
Info: Fetching http://100.127.20.23/installer/ACS/sonic-broadcom-lgh.bin ...
Connecting to 100.127.20.23 (100.127.20.23:80)
installer            100% |*******************************|   375M  0:00:00 ETA
ONIE: Executing installer: http://100.127.20.23/installer/ACS/sonic-broadcom-lgh.bin
Verifying image checksum ... OK.
Preparing image archive ... OK.
ONIE Installer: platform: x86_64-broadcom-r0
onie_platform: x86_64-dell_s6000_s1220-r0
Installing SONiC in ONIE
Replace ONIE reboot with Dell reset commands
deleting partition 3 ...
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot.
The operation has completed successfully.
Error: Partition(s) 3 on /dev/sda have been written, but we have been unable to inform the kernel of the change, probably because it/they are in use.  As a result, the old partition(s) will remain in use.  You should reboot now before making further changes.
Failure: Unable to install image: http://100.127.20.23/installer/ACS/sonic-broadcom-lgh.bin
@jleveque
Copy link
Contributor

I have also encountered this a number of times on the S6000.

@lguohan
Copy link
Collaborator Author

lguohan commented May 25, 2017

@qiluo-msft , do you know the error message?

@qiluo-msft
Copy link
Collaborator

May I ask some question to check the repro conditions?

  1. Only happens if there is a SONiC already installed?
  2. Always happens if installed, and disappear after reboot?

@lguohan
Copy link
Collaborator Author

lguohan commented Aug 12, 2018

addressed in #1575

@lguohan lguohan closed this as completed Aug 12, 2018
Kalimuthu-Velappan pushed a commit to Kalimuthu-Velappan/sonic-buildimage that referenced this issue Sep 12, 2019
madhanmellanox pushed a commit to madhanmellanox/sonic-buildimage that referenced this issue Mar 23, 2020
portsyncd listens to the netlink messages. In order for SNMP
to get the current oper status of the managemnt interface,
portsyncd will store eth0 oper status explicitly into the
state database.
lguohan added a commit to lguohan/sonic-buildimage that referenced this issue Jul 1, 2020
* ccbb3bc 2020-06-28 | add option to build without syncd (HEAD, origin/master, origin/HEAD) [Guohan Lu]
* 4247481 2020-06-28 | install saidiscovery into syncd package [Guohan Lu]
* 61b8e8e 2020-06-26 | Revert "sonic-sairedis: Add support to sonic-sairedis for gearbox phys (sonic-net#624)" (sonic-net#630) [Danny Allen]
* 85e543c 2020-06-26 | add a README to tests directory to describe how to run 'make check' (sonic-net#629) [Syd Logan]
* 2772f15 2020-06-26 | sonic-sairedis: Add support to sonic-sairedis for gearbox phys (sonic-net#624) [Syd Logan]

Signed-off-by: Guohan Lu <[email protected]>
lguohan added a commit that referenced this issue Jul 3, 2020
make swss build depends only on libsairedis instead of syncd. This allows to build swss without depending
on vendor sai library.

Currently, libsairedis build also buils syncd which requires vendor SAI lib. This makes difficult to build
swss docker in buster while still keeping syncd docker in stretch, as swss requires libsairedis which also
build syncd and requires vendor to provide SAI for buster. As swss docker does not really contain syncd
binary, so it is not necessary to build syncd for swss docker.

* [submodule]: update sonic-sairedis

* ccbb3bc 2020-06-28 | add option to build without syncd (HEAD, origin/master, origin/HEAD) [Guohan Lu]
* 4247481 2020-06-28 | install saidiscovery into syncd package [Guohan Lu]
* 61b8e8e 2020-06-26 | Revert "sonic-sairedis: Add support to sonic-sairedis for gearbox phys (#624)" (#630) [Danny Allen]
* 85e543c 2020-06-26 | add a README to tests directory to describe how to run 'make check' (#629) [Syd Logan]
* 2772f15 2020-06-26 | sonic-sairedis: Add support to sonic-sairedis for gearbox phys (#624) [Syd Logan]

Signed-off-by: Guohan Lu <[email protected]>
qiluo-msft pushed a commit to qiluo-msft/sonic-buildimage that referenced this issue Jul 12, 2020
…c-net#4880)

make swss build depends only on libsairedis instead of syncd. This allows to build swss without depending
on vendor sai library.

Currently, libsairedis build also buils syncd which requires vendor SAI lib. This makes difficult to build
swss docker in buster while still keeping syncd docker in stretch, as swss requires libsairedis which also
build syncd and requires vendor to provide SAI for buster. As swss docker does not really contain syncd
binary, so it is not necessary to build syncd for swss docker.

* [submodule]: update sonic-sairedis

* ccbb3bc 2020-06-28 | add option to build without syncd (HEAD, origin/master, origin/HEAD) [Guohan Lu]
* 4247481 2020-06-28 | install saidiscovery into syncd package [Guohan Lu]
* 61b8e8e 2020-06-26 | Revert "sonic-sairedis: Add support to sonic-sairedis for gearbox phys (sonic-net#624)" (sonic-net#630) [Danny Allen]
* 85e543c 2020-06-26 | add a README to tests directory to describe how to run 'make check' (sonic-net#629) [Syd Logan]
* 2772f15 2020-06-26 | sonic-sairedis: Add support to sonic-sairedis for gearbox phys (sonic-net#624) [Syd Logan]

Signed-off-by: Guohan Lu <[email protected]>
dmytroxshevchuk pushed a commit to dmytroxshevchuk/sonic-buildimage that referenced this issue Aug 31, 2020
lguohan added a commit to lguohan/sonic-buildimage that referenced this issue Jan 15, 2021
…c-net#4880)

make swss build depends only on libsairedis instead of syncd. This allows to build swss without depending
on vendor sai library.

Currently, libsairedis build also buils syncd which requires vendor SAI lib. This makes difficult to build
swss docker in buster while still keeping syncd docker in stretch, as swss requires libsairedis which also
build syncd and requires vendor to provide SAI for buster. As swss docker does not really contain syncd
binary, so it is not necessary to build syncd for swss docker.

* [submodule]: update sonic-sairedis

* ccbb3bc 2020-06-28 | add option to build without syncd (HEAD, origin/master, origin/HEAD) [Guohan Lu]
* 4247481 2020-06-28 | install saidiscovery into syncd package [Guohan Lu]
* 61b8e8e 2020-06-26 | Revert "sonic-sairedis: Add support to sonic-sairedis for gearbox phys (sonic-net#624)" (sonic-net#630) [Danny Allen]
* 85e543c 2020-06-26 | add a README to tests directory to describe how to run 'make check' (sonic-net#629) [Syd Logan]
* 2772f15 2020-06-26 | sonic-sairedis: Add support to sonic-sairedis for gearbox phys (sonic-net#624) [Syd Logan]

Signed-off-by: Guohan Lu <[email protected]>
stepanblyschak added a commit to stepanblyschak/sonic-buildimage that referenced this issue Jun 30, 2022
```
10cd834 [select] break the select loop if interrupt_on_signal flag is set (sonic-net#624)
d0cd8a0 Fix: missing sonic-db-cli in docker-sonic-vs image (sonic-net#640)
567f0df Change diff coverage threshold to 80% (sonic-net#630)
```

Signed-off-by: Stepan Blyschak <[email protected]>
liat-grozovik pushed a commit that referenced this issue Jul 6, 2022
10cd834 [select] break the select loop if interrupt_on_signal flag is set (#624)
d0cd8a0 Fix: missing sonic-db-cli in docker-sonic-vs image (#640)
567f0df Change diff coverage threshold to 80% (#630)

Signed-off-by: Stepan Blyschak <[email protected]>
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Projects
None yet
Development

No branches or pull requests

4 participants