Removed extra section from README link

README.md

@@ -2,7 +2,7 @@
 
 # Varmint H7
 
-This repository contains a board implementation of the [ROSflight firmware](https://github.com/rosflight/rosflight_firmware) for AeroVironment's Varmint FCU package, a STM32H753 based flight controller with a NVIDIA Jetson Orin NX on board. It also has an implementation for 3DR's [PixRacer Pro](https://docs.3dr.com/autopilots/pixracer-pro/#downloads) autopilot, which has a very similar configuration to the Varmint board.
+This repository contains a board implementation of the [ROSflight firmware](https://github.com/rosflight/rosflight_firmware) for AeroVironment's Varmint FCU package, a STM32H753 based flight controller with a NVIDIA Jetson Orin NX on board. It also has an implementation for 3DR's [PixRacer Pro](https://docs.3dr.com/autopilots/pixracer-pro/) autopilot, which has a very similar configuration to the Varmint board.
 
 This code is based off of a [STM32cubeMX](https://www.st.com/en/development-tools/stm32cubemx.html) project, which enables quick configuration of the H7 processor. STM32cubeMX works by generating code for the configuration specified by the STM32cubeMX software. The generated code contains sections of "BEGIN USER CODE" and "END USER CODE" that the developer can then add their code inside. User code inside of these sections will persist between reconfigurations of the H7, while anything outside will be overwritten.