Support IS31FL3741 and IS31FL3741A.

common_features.mk

@@ -144,7 +144,7 @@ ifeq ($(strip $(RGBLIGHT_ENABLE)), yes)
     endif
 endif
 
-VALID_MATRIX_TYPES := yes IS31FL3731 IS31FL3733 IS31FL3737 WS2812 custom
+VALID_MATRIX_TYPES := yes IS31FL3731 IS31FL3733 IS31FL3737 IS31FL3741 WS2812 custom
 
 LED_MATRIX_ENABLE ?= no
 ifneq ($(strip $(LED_MATRIX_ENABLE)), no)
@@ -205,6 +205,13 @@ ifeq ($(strip $(RGB_MATRIX_ENABLE)), IS31FL3737)
     QUANTUM_LIB_SRC += i2c_master.c
 endif
 
+ifeq ($(strip $(RGB_MATRIX_ENABLE)), IS31FL3741)
+    OPT_DEFS += -DIS31FL3741 -DSTM32_I2C -DHAL_USE_I2C=TRUE
+    COMMON_VPATH += $(DRIVER_PATH)/issi
+    SRC += is31fl3741.c
+    QUANTUM_LIB_SRC += i2c_master.c
+endif
+
 ifeq ($(strip $(RGB_MATRIX_ENABLE)), WS2812)
     OPT_DEFS += -DWS2812
     WS2812_DRIVER_REQUIRED := yes

drivers/issi/is31fl3741.c

@@ -0,0 +1,289 @@
+/* Copyright 2017 Jason Williams
+ * Copyright 2018 Jack Humbert
+ * Copyright 2018 Yiancar
+ * Copyright 2020 MelGeek
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "wait.h"
+
+#include "is31fl3741.h"
+#include <string.h>
+#include "i2c_master.h"
+#include "progmem.h"
+
+
+// This is a 7-bit address, that gets left-shifted and bit 0
+// set to 0 for write, 1 for read (as per I2C protocol)
+// The address will vary depending on your wiring:
+// 00 <-> GND
+// 01 <-> SCL
+// 10 <-> SDA
+// 11 <-> VCC
+// ADDR1 represents A1:A0 of the 7-bit address.
+// ADDR2 represents A3:A2 of the 7-bit address.
+// The result is: 0b101(ADDR2)(ADDR1)
+#define ISSI_ADDR_DEFAULT 0x60
+
+#define ISSI_COMMANDREGISTER 0xFD
+#define ISSI_COMMANDREGISTER_WRITELOCK 0xFE
+#define ISSI_INTERRUPTMASKREGISTER 0xF0
+#define ISSI_INTERRUPTSTATUSREGISTER 0xF1
+#define ISSI_IDREGISTER 0xFC
+
+#define ISSI_PAGE_PWM0 0x00       // PG0
+#define ISSI_PAGE_PWM1 0x01       // PG1
+#define ISSI_PAGE_SCALING_0 0x02  // PG2
+#define ISSI_PAGE_SCALING_1 0x03  // PG3
+#define ISSI_PAGE_FUNCTION 0x04   // PG4
+
+#define ISSI_REG_CONFIGURATION 0x00  // PG4
+#define ISSI_REG_GLOBALCURRENT 0x01  // PG4
+#define ISSI_REG_PULLDOWNUP 0x02     // PG4
+#define ISSI_REG_RESET 0x3F          // PG4
+
+#ifndef ISSI_TIMEOUT
+#    define ISSI_TIMEOUT 100
+#endif
+
+#ifndef ISSI_PERSISTENCE
+#    define ISSI_PERSISTENCE 0
+#endif
+
+#define ISSI_MAX_LEDS 351
+
+// Transfer buffer for TWITransmitData()
+uint8_t g_twi_transfer_buffer[20] = {0xFF};
+
+// These buffers match the IS31FL3741 and IS31FL3741A PWM registers.
+// The scaling buffers match the PG2 and PG3 LED On/Off registers.
+// Storing them like this is optimal for I2C transfers to the registers.
+// We could optimize this and take out the unused registers from these
+// buffers and the transfers in IS31FL3741_write_pwm_buffer() but it's
+// probably not worth the extra complexity.
+uint8_t g_pwm_buffer[DRIVER_COUNT][ISSI_MAX_LEDS];
+bool    g_pwm_buffer_update_required                      = false;
+bool    g_scaling_registers_update_required[DRIVER_COUNT] = {false};
+
+uint8_t g_scaling_registers[DRIVER_COUNT][ISSI_MAX_LEDS];
+
+uint32_t IS31FL3741_get_cw_sw_position(uint8_t cs, uint8_t sw) {
+    uint32_t pos = 0;
+
+    if (cs < 31) {
+        if (sw < 7) {
+            pos = (sw - 1) * 30 + (cs - 1);
+
+        } else {
+            pos = 0xB4 + (sw - 7) * 30 + (cs - 1);
+        }
+    } else {
+        pos = 0xB4 + 0x5A + (sw - 1) * 9 + (cs - 31);
+    }
+
+    return pos;
+}
+
+void IS31FL3741_write_register(uint8_t addr, uint8_t reg, uint8_t data) {
+    g_twi_transfer_buffer[0] = reg;
+    g_twi_transfer_buffer[1] = data;
+
+#if ISSI_PERSISTENCE > 0
+    for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
+        if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT) == 0) break;
+    }
+#else
+    i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT);
+#endif
+}
+
+bool IS31FL3741_write_pwm_buffer(uint8_t addr, uint8_t *pwm_buffer) {
+    // unlock the command register and select PG2
+    IS31FL3741_write_register(addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
+    IS31FL3741_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM0);
+
+    for (int i = 0; i < 342; i += 18) {
+        g_twi_transfer_buffer[0] = i % 180;
+
+        if (i == 180) {
+            // unlock the command register and select PG2
+            IS31FL3741_write_register(addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
+            IS31FL3741_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM1);
+        }
+
+        memcpy(g_twi_transfer_buffer + 1, pwm_buffer + i, 18);
+
+#if ISSI_PERSISTENCE > 0
+        for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
+            if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 19, ISSI_TIMEOUT) != 0) {
+                return false;
+            }
+        }
+#else
+        if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 19, ISSI_TIMEOUT) != 0) {
+            return false;
+        }
+#endif
+    }
+
+    // transfer the left cause the total number is 351
+    g_twi_transfer_buffer[0] = 162;
+    memcpy(g_twi_transfer_buffer + 1, pwm_buffer + 342, 9);
+
+#if ISSI_PERSISTENCE > 0
+    for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
+        if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 10, ISSI_TIMEOUT) != 0) {
+            return false;
+        }
+    }
+#else
+    if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 10, ISSI_TIMEOUT) != 0) {
+        return false;
+    }
+#endif
+
+    return true;
+}
+
+void IS31FL3741_init(uint8_t addr) {
+    // In order to avoid the LEDs being driven with garbage data
+    // in the LED driver's PWM registers, shutdown is enabled last.
+    // Set up the mode and other settings, clear the PWM registers,
+    // then disable software shutdown.
+    // Unlock the command register.
+
+    // Unlock the command register.
+    IS31FL3741_write_register(addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
+
+    // Select PG4
+    IS31FL3741_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_FUNCTION);
+
+    // Set to Normal operation
+    IS31FL3741_write_register(addr, ISSI_REG_CONFIGURATION, 0x01);
+
+    // Set Golbal Current Control Register
+    IS31FL3741_write_register(addr, ISSI_REG_GLOBALCURRENT, 0xFF);
+    // Set Pull up & Down for SWx CSy
+    IS31FL3741_write_register(addr, ISSI_REG_PULLDOWNUP, 0x77);
+
+// IS31FL3741_update_led_scaling_registers(addr, 0xFF, 0xFF, 0xFF);
+
+// Wait 10ms to ensure the device has woken up.
+    wait_ms(10);
+}
+
+void IS31FL3741_set_color(int index, uint8_t red, uint8_t green, uint8_t blue) {
+    if (index >= 0 && index < DRIVER_LED_TOTAL) {
+        is31_led led = g_is31_leds[index];
+        uint32_t rp = 0, gp = 0, bp = 0;
+
+        rp = IS31FL3741_get_cw_sw_position(led.rcs, led.rsw);
+        gp = IS31FL3741_get_cw_sw_position(led.gcs, led.gsw);
+        bp = IS31FL3741_get_cw_sw_position(led.bcs, led.bsw);
+
+        g_pwm_buffer[led.driver][rp] = red;
+        g_pwm_buffer[led.driver][gp] = green;
+        g_pwm_buffer[led.driver][bp] = blue;
+        g_pwm_buffer_update_required = true;
+    }
+}
+
+void IS31FL3741_set_color_all(uint8_t red, uint8_t green, uint8_t blue) {
+    for (int i = 0; i < DRIVER_LED_TOTAL; i++) {
+        IS31FL3741_set_color(i, red, green, blue);
+    }
+}
+
+void IS31FL3741_set_led_control_register(uint8_t index, bool red, bool green, bool blue) {
+    is31_led led = g_is31_leds[index];
+
+    uint32_t scaling_register_r = IS31FL3741_get_cw_sw_position(led.rcs, led.rsw);
+    uint32_t scaling_register_g = IS31FL3741_get_cw_sw_position(led.gcs, led.gsw);
+    uint32_t scaling_register_b = IS31FL3741_get_cw_sw_position(led.bcs, led.bsw);
+
+    if (red) {
+        g_scaling_registers[led.driver][scaling_register_r] = 0xFF;
+    } else {
+        g_scaling_registers[led.driver][scaling_register_r] = 0x00;
+    }
+
+    if (green) {
+        g_scaling_registers[led.driver][scaling_register_g] = 0xFF;
+    } else {
+        g_scaling_registers[led.driver][scaling_register_g] = 0x00;
+    }
+
+    if (blue) {
+        g_scaling_registers[led.driver][scaling_register_b] = 0xFF;
+    } else {
+        g_scaling_registers[led.driver][scaling_register_b] = 0x00;
+    }
+
+    g_scaling_registers_update_required[led.driver] = true;
+}
+
+void IS31FL3741_update_pwm_buffers(uint8_t addr1, uint8_t addr2) {
+    if (g_pwm_buffer_update_required) {
+        IS31FL3741_write_pwm_buffer(addr1, g_pwm_buffer[0]);
+    }
+
+    g_pwm_buffer_update_required = false;
+}
+
+void IS31FL3741_set_pwm_buffer(const is31_led *pled, uint8_t red, uint8_t green, uint8_t blue) {
+    uint32_t rp = 0, gp = 0, bp = 0;
+
+    rp = IS31FL3741_get_cw_sw_position(pled->rcs, pled->rsw);
+    gp = IS31FL3741_get_cw_sw_position(pled->gcs, pled->gsw);
+    bp = IS31FL3741_get_cw_sw_position(pled->bcs, pled->bsw);
+
+    g_pwm_buffer[pled->driver][rp] = red;
+    g_pwm_buffer[pled->driver][gp] = green;
+    g_pwm_buffer[pled->driver][bp] = blue;
+
+    g_pwm_buffer_update_required = true;
+}
+
+void IS31FL3741_update_led_control_registers(uint8_t addr, uint8_t index) {
+    if (g_scaling_registers_update_required[index]) {
+        // unlock the command register and select PG2
+        IS31FL3741_write_register(addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
+        IS31FL3741_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_SCALING_0);
+
+        for (int i = 0; i < 180; ++i) {
+            IS31FL3741_write_register(addr, i, g_scaling_registers[0][i]);
+        }
+
+        // unlock the command register and select PG3
+        IS31FL3741_write_register(addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
+        IS31FL3741_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_SCALING_1);
+
+        for (int i = 0; i < 171; ++i) {
+            IS31FL3741_write_register(addr, i, g_scaling_registers[0][180 + i]);
+        }
+    }
+}
+
+void IS31FL3741_set_scaling_registers(const is31_led *pled, uint8_t red, uint8_t green, uint8_t blue) {
+    uint32_t rp = 0, gp = 0, bp = 0;
+
+    rp = IS31FL3741_get_cw_sw_position(pled->rcs, pled->rsw);
+    gp = IS31FL3741_get_cw_sw_position(pled->gcs, pled->gsw);
+    bp = IS31FL3741_get_cw_sw_position(pled->bcs, pled->bsw);
+
+    g_scaling_registers[pled->driver][rp] = red;
+    g_scaling_registers[pled->driver][gp] = green;
+    g_scaling_registers[pled->driver][bp] = blue;
+}

drivers/issi/is31fl3741.h

@@ -0,0 +1,55 @@
+/* Copyright 2017 Jason Williams
+ * Copyright 2018 Jack Humbert
+ * Copyright 2018 Yiancar
+ * Copyright 2020 MelGeek
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include <stdint.h>
+#include <stdbool.h>
+
+typedef struct is31_led {
+    uint8_t driver : 2;
+    uint8_t rcs;
+    uint8_t rsw;
+    uint8_t gcs;
+    uint8_t gsw;
+    uint8_t bcs;
+    uint8_t bsw;
+} __attribute__((packed)) is31_led;
+
+extern const is31_led g_is31_leds[DRIVER_LED_TOTAL];
+extern const is31_led g_is31_indicator_leds[DRIVER_INDICATOR_LED_TOTAL];
+
+void IS31FL3741_init(uint8_t addr);
+void IS31FL3741_write_register(uint8_t addr, uint8_t reg, uint8_t data);
+bool IS31FL3741_write_pwm_buffer(uint8_t addr, uint8_t *pwm_buffer);
+
+void IS31FL3741_set_color(int index, uint8_t red, uint8_t green, uint8_t blue);
+void IS31FL3741_set_color_all(uint8_t red, uint8_t green, uint8_t blue);
+
+void IS31FL3741_set_led_control_register(uint8_t index, bool red, bool green, bool blue);
+
+// This should not be called from an interrupt
+// (eg. from a timer interrupt).
+// Call this while idle (in between matrix scans).
+// If the buffer is dirty, it will update the driver with the buffer.
+void IS31FL3741_update_pwm_buffers(uint8_t addr1, uint8_t addr2);
+void IS31FL3741_update_led_control_registers(uint8_t addr1, uint8_t addr2);
+void IS31FL3741_set_scaling_registers(const is31_led *pled, uint8_t red, uint8_t green, uint8_t blue);
+
+void IS31FL3741_set_pwm_buffer(const is31_led *pled, uint8_t red, uint8_t green, uint8_t blue);

quantum/rgb_matrix.h

@@ -32,6 +32,8 @@
 #    include "is31fl3733.h"
 #elif defined(IS31FL3737)
 #    include "is31fl3737.h"
+#elif defined(IS31FL3741)
+#    include "is31fl3741.h"
 #elif defined(WS2812)
 #    include "ws2812.h"
 #endif