Add Elongate PCB support

keyboards/acheron/elongate/config.h

@@ -0,0 +1,250 @@
+/*
+Copyright 2020 Gondolindrim
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0x4150 //AP for AcheronProject
+#define PRODUCT_ID 0x454C // EL for Elongate
+#define DEVICE_VER 0x0001
+#define MANUFACTURER Acheron Project
+#define PRODUCT Elongate
+#define DESCRIPTION Acheron Project Elongate
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 13
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+#define MATRIX_ROW_PINS { D3, B7, D5, B5, D6 }
+#define MATRIX_COL_PINS { F5, F6, F4, F1, F0, B2, B1, C6, B0, B3, E6, D4, B4}
+//#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
+/*
+ * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
+ */
+// #define SOFT_SERIAL_PIN D0  // or D1, D2, D3, E6
+
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+#define RGB_DI_PIN D7
+#ifdef RGB_DI_PIN
+  #define RGBLED_NUM 16
+  #define RGBLIGHT_HUE_STEP 8
+  #define RGBLIGHT_SAT_STEP 8
+  #define RGBLIGHT_VAL_STEP 8
+  #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+  #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+/*== all animations enable ==*/
+  #define RGBLIGHT_ANIMATIONS
+/*== or choose animations ==*/
+//  #define RGBLIGHT_EFFECT_BREATHING
+//  #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+//  #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+//  #define RGBLIGHT_EFFECT_SNAKE
+//  #define RGBLIGHT_EFFECT_KNIGHT
+//  #define RGBLIGHT_EFFECT_CHRISTMAS
+//  #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+//  #define RGBLIGHT_EFFECT_RGB_TEST
+//  #define RGBLIGHT_EFFECT_ALTERNATING
+/*== customize breathing effect ==*/
+  /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
+  #define RGBLIGHT_BREATHE_TABLE_SIZE 256      // 256(default) or 128 or 64
+  /*==== use exp() and sin() ====*/
+//  #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85  // 1 to 2.7
+//  #define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
+#endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+/* defined by default; to change, uncomment and set to the combination you want */
+// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT)
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP           H
+//#define MAGIC_KEY_HELP_ALT       SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER0_ALT     GRAVE
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     B
+//#define MAGIC_KEY_BOOTLOADER_ALT ESC
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_EEPROM_CLEAR   BSPACE
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+
+/* disable these deprecated features by default */
+#define NO_ACTION_MACRO
+#define NO_ACTION_FUNCTION
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+/*
+ * HD44780 LCD Display Configuration
+ */
+/*
+#define LCD_LINES           2     //< number of visible lines of the display
+#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
+
+#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
+
+#if LCD_IO_MODE
+#define LCD_PORT         PORTB        //< port for the LCD lines
+#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
+#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
+#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
+#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
+#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
+#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
+#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
+#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
+#define LCD_RS_PORT      LCD_PORT     //< port for RS line
+#define LCD_RS_PIN       3            //< pin  for RS line
+#define LCD_RW_PORT      LCD_PORT     //< port for RW line
+#define LCD_RW_PIN       2            //< pin  for RW line
+#define LCD_E_PORT       LCD_PORT     //< port for Enable line
+#define LCD_E_PIN        1            //< pin  for Enable line
+#endif
+*/
+
+/* Bootmagic Lite key configuration */
+// #define BOOTMAGIC_LITE_ROW 0
+// #define BOOTMAGIC_LITE_COLUMN 0

keyboards/acheron/elongate/elongate.c

@@ -0,0 +1,26 @@
+/* Copyright 2020 Gondolindrim
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "elongate.h"
+bool led_update_kb(led_t led_state) {
+    bool res = led_update_user(led_state);
+    if(res) {
+        writePin(D2, led_state.num_lock);
+        writePin(D1, led_state.caps_lock);
+        writePin(D0, led_state.scroll_lock);
+    }
+    return res;
+}

keyboards/acheron/elongate/elongate.h

@@ -0,0 +1,44 @@
+/* Copyright 2020 Gondolindrim
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"
+
+/* This is a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the Keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+
+#define KNO KC_NO
+
+#define LAYOUT( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K49, K41, \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19,      K1B, K1C, K4A, K42, \
+    K20,      K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K4B, K44, \
+    K30, K31, K32,      K34,           K37,      K3A, K3B, K3C, K3D, K4C, K47  \
+)\
+{\
+    { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C }, \
+    { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, KNO, K1B, K1C }, \
+    { K20, KNO, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C }, \
+    { K30, K31, K32, KNO, K34, KNO, KNO, K37, KNO, K3A, K3B, K3C, K3D }, \
+    { KNO, K41, K42, KNO, K44, KNO, KNO, K47, KNO, K49, K4A, K4B, K4C }  \
+}

keyboards/acheron/elongate/info.json

@@ -0,0 +1,70 @@
+{
+    "keyboard_name": "Elongate",
+    "url": "http://gondolindrim.github.io/AcheronDocs/elongate/introduction.html",
+    "maintainer": "Gondolindrim",
+    "width": 15.5,
+    "height": 4.25,
+    "layouts": {
+        "LAYOUT_all": {
+            "layout": [
+                {"label":"Tab", "x":0, "y":0},
+                {"label":"Q", "x":1, "y":0},
+                {"label":"W", "x":2, "y":0},
+                {"label":"E", "x":3, "y":0},
+                {"label":"R", "x":4, "y":0},
+                {"label":"T", "x":5, "y":0},
+                {"label":"Y", "x":6, "y":0},
+                {"label":"U", "x":7, "y":0},
+                {"label":"I", "x":8, "y":0},
+                {"label":"O", "x":9, "y":0},
+                {"label":"P", "x":10, "y":0},
+                {"label":"Backspace", "x":11, "y":0},
+                {"label":"7", "x":12.5, "y":0},
+                {"label":"8", "x":13.5, "y":0},
+                {"label":"9", "x":14.5, "y":0},
+
+                {"label":"Caps Lock", "x":0, "y":1, "w":1.25},
+                {"label":"A", "x":1.25, "y":1},
+                {"label":"S", "x":2.25, "y":1},
+                {"label":"D", "x":3.25, "y":1},
+                {"label":"F", "x":4.25, "y":1},
+                {"label":"G", "x":5.25, "y":1},
+                {"label":"H", "x":6.25, "y":1},
+                {"label":"J", "x":7.25, "y":1},
+                {"label":"K", "x":8.25, "y":1},
+                {"label":"L", "x":9.25, "y":1},
+                {"label":"Enter", "x":10.25, "y":1.75},
+                {"label":"4", "x":12.5, "y":1},
+                {"label":"5", "x":13.5, "y":1},
+                {"label":"6", "x":14.5, "y":1},
+
+                {"label":"Shift", "x":0, "y":2, "w":1.75},
+                {"label":"Z", "x":1.75, "y":2},
+                {"label":"X", "x":2.75, "y":2},
+                {"label":"C", "x":3.75, "y":2},
+                {"label":"V", "x":4.75, "y":2},
+                {"label":"B", "x":5.75, "y":2},
+                {"label":"N", "x":6.75, "y":2},
+                {"label":"M", "x":7.75, "y":2},
+                {"label":"<", "x":8.75, "y":2},
+                {"label":"Fn1", "x":9.75, "y":2},
+                {"label":"Up", "x":11.25, "y":2.25},
+                {"label":"1", "x":12.5, "y":2},
+                {"label":"2", "x":13.5, "y":2},
+                {"label":"3", "x":14.5, "y":2},
+
+                {"label":"Ctrl", "x":0, "y":3, "w":1.25},
+                {"label":"Win", "x":1.25, "y":3},
+                {"label":"Alt", "x":2.25, "y":3, "w":1.25},
+                {"label":"Space/Fn2", "x":3.5, "y":3, "w":2.25},
+                {"label":"Space", "x":6.25, "y":3, "w":2.75},
+                {"label":"Alt", "x":9, "y":3},
+                {"label":"Left", "x":10.25, "y":3.25},
+                {"label":"Down", "x":11.25, "y":3.25},
+                {"label":"Right", "x":12.25, "y":3.25},
+                {"label":"0", "x":13.5, "y":3},
+                {"label":".", "x":14.5, "y":3},
+            ]
+        }
+    }
+}