Barleycorn

keyboards/barleycorn/config.h

@@ -51,38 +51,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #define USB_MAX_POWER_CONSUMPTION 100
 
-/*
- * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
- */
-// #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
-
-// #define BACKLIGHT_PIN B7
-// #define BACKLIGHT_BREATHING
-// #define BACKLIGHT_LEVELS 3
-
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-//   #define RGBLED_NUM 16
-//   #define RGBLIGHT_HUE_STEP 8
-//   #define RGBLIGHT_SAT_STEP 8
-//   #define RGBLIGHT_VAL_STEP 8
-//   #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-//   #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// /*== all animations enable ==*/
-//   #define RGBLIGHT_ANIMATIONS
-// /*== or choose animations ==*/
-//   #define RGBLIGHT_EFFECT_BREATHING
-//   #define RGBLIGHT_EFFECT_RAINBOW_MOOD
-//   #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
-//   #define RGBLIGHT_EFFECT_SNAKE
-//   #define RGBLIGHT_EFFECT_KNIGHT
-//   #define RGBLIGHT_EFFECT_CHRISTMAS
-//   #define RGBLIGHT_EFFECT_STATIC_GRADIENT
-//   #define RGBLIGHT_EFFECT_RGB_TEST
-//   #define RGBLIGHT_EFFECT_ALTERNATING
-// #endif
-
-/* number of backlight levels */
 
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
@@ -115,9 +83,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 //#define FORCE_NKRO
 
-/* key combination for magic key command */
-/* defined by default; to change, uncomment and set to the combination you want */
-// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
 
 /*
  * Feature disable options

keyboards/barleycorn/info.json

@@ -76,24 +76,24 @@
           {"label":"3,10", "x":10.25, "y":3},
           {"label":"3,11", "x":11.25, "y":3},
           {"label":"3,12", "x":12.25, "y":3, "w":1.75},
+          {"label":"3,13", "x":14.25, "y":3.25},
           {"label":"3,14", "x":15.5, "y":3},
           {"label":"3,15", "x":16.5, "y":3},
           {"label":"3,16", "x":17.5, "y":3},
           {"label":"3,17", "x":18.5, "y":3},
-          {"label":"3,13", "x":14.25, "y":3.25},
 
           {"label":"4,0", "x":0, "y":4, "w":1.25},
           {"label":"4,1", "x":1.25, "y":4, "w":1.25},
           {"label":"4,2", "x":2.5, "y":4, "w":1.25},
           {"label":"4,6", "x":3.75, "y":4, "w":6.25},
           {"label":"4,10", "x":10, "y":4, "w":1.5},
           {"label":"4,11", "x":11.5, "y":4, "w":1.5},
-          {"label":"4,15", "x":16.5, "y":4},
-          {"label":"4,16", "x":17.5, "y":4},
-          {"label":"4,17", "x":18.5, "y":4},
           {"label":"4,12", "x":13.25, "y":4.25},
           {"label":"4,13", "x":14.25, "y":4.25},
-          {"label":"4,14", "x":15.25, "y":4.25}
+          {"label":"4,14", "x":15.25, "y":4.25},
+          {"label":"4,15", "x":16.5, "y":4},
+          {"label":"4,16", "x":17.5, "y":4},
+          {"label":"4,17", "x":18.5, "y":4}
         ]
       }
     }

keyboards/barleycorn/readme.md

@@ -1,12 +1,12 @@
 # Barleycorn
 
-![Barleycorn](https://yiancar-designs.com/wp-content/uploads/2019/06/IMG_20190625_233619.jpg)
+![Barleycorn](https://i.imgur.com/vi3L1HY.png)
 
 A f-row less compact 1800 kit with only through hole components.
 
-Keyboard Maintainer: [Yiancar](http://yiancar-designs.com/) and on [GitHub](https://github.com/yiancar)\
-Hardware Supported: ATMEGA328p with vusb [PCB](https://github.com/yiancar/gingham_pcb)\
-Hardware Availability: https://mykeyboard.eu/, https://novelkeys.xyz
+* Keyboard Maintainer: [Yiancar](http://yiancar-designs.com/) and on [GitHub](https://github.com/yiancar)
+* Hardware Supported: ATMEGA328p with vusb [PCB](https://github.com/yiancar/gingham_pcb)
+* Hardware Availability: https://mykeyboard.eu/, https://novelkeys.xyz
 
 Make example for this keyboard (after setting up your build environment):
 

keyboards/barleycorn/rules.mk

@@ -1,17 +1,7 @@
-SRC = matrix.c \
-      i2c_master.c
-
 # MCU name
 MCU = atmega328p
 
 # Bootloader selection
-#   Teensy       halfkay
-#   Pro Micro    caterina
-#   Atmel DFU    atmel-dfu
-#   LUFA DFU     lufa-dfu
-#   QMK DFU      qmk-dfu
-#   ATmega32A    bootloadHID
-#   ATmega328P   USBasp
 BOOTLOADER = USBasp
 
 # Build Options
@@ -28,8 +18,10 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE = no           # Audio output on port C6
+BLUETOOTH_ENABLE = no       # Enable Bluetooth
+AUDIO_ENABLE = no           # Audio output
 
 CUSTOM_MATRIX = lite
+
+SRC = matrix.c \
+      i2c_master.c