Add Drakon

keyboards/drakon/config.h

@@ -0,0 +1,146 @@
+/*
+Copyright 2020 jagdpietr
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x7776
+#define DEVICE_VER 0x0001
+#define MANUFACTURER jagdpietr
+#define PRODUCT drakon
+
+/* key matrix size */
+#define MATRIX_ROWS 6
+#define MATRIX_COLS 14
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+#define MATRIX_ROW_PINS { C7, B5, B6, B0, B1, F1 }
+#define MATRIX_COL_PINS { F4, F5, F6, F7, C6, B2, B3, B7, D3, D5, D4, D6, D7, B4 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
+#define ENCODERS_PAD_A { D2 }
+#define ENCODERS_PAD_B { F0 }
+
+/*
+ * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
+ */
+#define SOFT_SERIAL_PIN D0  // or D1, D2, D3, E6
+
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+// #define RGB_DI_PIN E2
+// #ifdef RGB_DI_PIN
+//   #define RGBLED_NUM 16
+//   #define RGBLIGHT_HUE_STEP 8
+//   #define RGBLIGHT_SAT_STEP 8
+//   #define RGBLIGHT_VAL_STEP 8
+//   #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+//   #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+// /*== all animations enable ==*/
+//   #define RGBLIGHT_ANIMATIONS
+// /*== or choose animations ==*/
+//   #define RGBLIGHT_EFFECT_BREATHING
+//   #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+//   #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+//   #define RGBLIGHT_EFFECT_SNAKE
+//   #define RGBLIGHT_EFFECT_KNIGHT
+//   #define RGBLIGHT_EFFECT_CHRISTMAS
+//   #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+//   #define RGBLIGHT_EFFECT_RGB_TEST
+//   #define RGBLIGHT_EFFECT_ALTERNATING
+// /*== customize breathing effect ==*/
+//   /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
+//   #define RGBLIGHT_BREATHE_TABLE_SIZE 256      // 256(default) or 128 or 64
+//   /*==== use exp() and sin() ====*/
+//   #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85  // 1 to 2.7
+//   #define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
+// #endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+
+/* disable these deprecated features by default */
+#define NO_ACTION_MACRO
+#define NO_ACTION_FUNCTION

keyboards/drakon/drakon.c

@@ -0,0 +1,113 @@
+/* Copyright 2020 jagdpietr
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "drakon.h"
+
+// Optional override functions below.
+// You can leave any or all of these undefined.
+// These are only required if you want to perform custom actions.
+
+/*
+void matrix_init_kb(void) {
+    // put your keyboard start-up code here
+    // runs once when the firmware starts up
+
+    matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+    // put your looping keyboard code here
+    // runs every cycle (a lot)
+
+    matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+    // put your per-action keyboard code here
+    // runs for every action, just before processing by the firmware
+
+    return process_record_user(keycode, record);
+}
+
+bool led_update_kb(led_t led_state) {
+    // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+    #ifdef OLED_DRIVER_ENABLE
+    static uint8_t caps_state = 0;
+    if (caps_state != led_state.caps_lock) {
+        led_state.caps_lock ? PSTR("CAP ") : PSTR("    "), false;
+        caps_state = led_state.caps_lock;
+    }
+    #endif
+
+    return led_update_user(led_state);
+}
+
+void render_logo(void) {
+    static const char PROGMEM drakon_logo[] = {
+        0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x00, 0x1c, 0x30, 0xe0, 0x00, 
+        0x0f, 0xd0, 0xa0, 0x00, 0x07, 0x88, 0xc0, 0x00, 0x02, 0xcc, 0xa0, 0x00, 0x0c, 0x34, 0x10, 0x00, 
+        0xff, 0x1a, 0x18, 0x00, 0x07, 0xef, 0x18, 0x00, 0x00, 0x3f, 0x28, 0x00, 0x00, 0x07, 0x85, 0x00, 
+        0x04, 0x0b, 0x86, 0x00, 0x04, 0x0d, 0xc6, 0x00, 0x06, 0x0c, 0xc5, 0x00, 0x06, 0x0c, 0x61, 0x00, 
+        0x0e, 0x08, 0x62, 0x40, 0x0a, 0x0a, 0x32, 0x40, 0x0a, 0x0a, 0x32, 0x40, 0x0a, 0x0c, 0x11, 0x00, 
+        0x0f, 0x0c, 0x18, 0xa0, 0x0b, 0x0c, 0x08, 0xc0, 0x0d, 0x8c, 0x0c, 0xe0, 0x03, 0xe0, 0x04, 0xa0, 
+        0x00, 0x3f, 0xf4, 0x00, 0x00, 0x00, 0x16, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
+    };
+
+oled_write_P(drakon_logo, false);
+}
+
+#ifdef OLED_DRIVER_ENABLE
+
+oled_rotation_t oled_init_user(oled_rotation_t rotation) {
+        return OLED_ROTATION_90;  // flips the display 90 degrees if offhand
+    }
+
+
+void oled_task_user(void) {
+    // Host Keyboard Layer Status
+    oled_write_P(PSTR("Lyr: "), false);
+
+    switch (get_highest_layer(layer_state)) {
+        case _Base:
+            oled_write_P(PSTR("Base\n"), false);
+            break;
+        case _FN:
+            oled_write_P(PSTR("FN\n"), false);
+            break;
+        default:
+            // Or use the write_ln shortcut over adding '\n' to the end of your string
+            oled_write_ln_P(PSTR("Undefined"), false);
+
+
+    }
+    // Host Keyboard LED Status
+    led_t led_state = host_keyboard_led_state();
+    oled_write_P(led_state.caps_lock ? PSTR("CAP ") : PSTR("    "), false);
+
+void render_logo(void) {
+    static const char PROGMEM drakon_logo[] = {
+        0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x98, 0xf8, 0x30, 0x30, 0x50, 0xd8, 0x8c, 0x30, 0x60, 0x80, 
+        0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 
+        0x01, 0x01, 0x01, 0xf3, 0x03, 0x02, 0x02, 0x02, 0x06, 0xc5, 0x7e, 0xcf, 0x1f, 0x3c, 0xf0, 0xc0, 
+        0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x04, 0x7b, 0x77, 
+        0xfc, 0xe0, 0xc0, 0x80, 0x80, 0x0f, 0x70, 0x7f, 0x00, 0x00, 0x00, 0x01, 0x0f, 0x3c, 0xf0, 0x80, 
+        0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 
+        0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x03, 0x03, 0x00, 0x03, 0x00, 0x00, 0x00, 0x00
+    };
+
+    oled_write_P(drakon_logo, false);
+}
+*/

keyboards/drakon/drakon.h

@@ -0,0 +1,91 @@
+/* Copyright 2020 jagdpietr
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"
+
+#define XXX KC_NO
+
+/* This is a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+
+
+/* LAYOUT_ansi
+ * ,---------------------------------------------------------.     .---. 
+ * |00 |01 |02 |03 |04 |05 |06 |07 |08 |09 |0A |0B |0C |0D|2D|     |5C |
+ * |---------------------------------------------------------| ,-----------.
+ * |10  |11 |12 |13 |14 |15 |16 |17 |18 |19 |1A |1B |1C |1D  | |5A |5D |59 |
+ * |---------------------------------------------------------| `-----------'
+ * |20   |21 |22 |23 |24 |25 |26 |27 |28 |29 |2A |2B |2C     |     |5B |
+ * |---------------------------------------------------------.     `---'
+ * |30    |31 |32 |33 |34 |35 |36 |37 |38 |39 |3A |3B |  |3C |
+ * |--------------------------------------------------'--`---'---.
+ * |40 |41 |42 |   43                     |49 |4A |  |4B |4C |4D |
+ * `----------------------------------------------'  `-----------'
+ */
+
+#define LAYOUT_ansi( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K2D,      K5C,      \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D,      K5A, K5D, K59, \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C,                K5B,      \
+    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B,      K3C,                     \
+    K40, K41, K42, K43,                          K49, K4A,      K4B, K4C, K4D                 \
+) \
+{ \
+    { K00,  K01,  K02,  K03,  K04,  K05,  K06,  K07,  K08,  K09,  K0A,  K0B,  K0C,  K0D  }, \
+    { K10,  K11,  K12,  K13,  K14,  K15,  K16,  K17,  K18,  K19,  K1A,  K1B,  K1C,  K1D  }, \
+    { K20,  K21,  K22,  K23,  K24,  K25,  K26,  K27,  K28,  K29,  K2A,  K2B,  K2C,  K2D  }, \
+    { K30,  K31,  K32,  K33,  K34,  K35,  K36,  K37,  K38,  K39,  K3A,  K3B,  K3C,  XXX  }, \
+    { K40,  K41,  K42,  K43,  XXX,  XXX,  XXX,  XXX,  XXX,  K49,  K4A,  K4B,  K4C,  K4D  }, \
+    { XXX,  XXX,  XXX,  XXX,  XXX,  XXX,  XXX,  XXX,  XXX,  K59,  K5A,  K5B,  K5C,  K5D  }  \
+}
+
+/* LAYOUT_wkl
+ * ,---------------------------------------------------------.     .---. 
+ * |00 |01 |02 |03 |04 |05 |06 |07 |08 |09 |0A |0B |0C |0D|2D|     |5C |
+ * |---------------------------------------------------------| ,-----------.
+ * |10  |11 |12 |13 |14 |15 |16 |17 |18 |19 |1A |1B |1C |1D  | |5A |5D |59 |
+ * |---------------------------------------------------------| `-----------'
+ * |20   |21 |22 |23 |24 |25 |26 |27 |28 |29 |2A |2B |2C     |     |5B |
+ * |---------------------------------------------------------.     `---'
+ * |30    |31 |32 |33 |34 |35 |36 |37 |38 |39 |3A |3B |  |3C |
+ * |--------------------------------------------------'--`---'---.
+ * |40 |   |42 |   43                     |49 |4A |  |4B |4C |4D |
+ * `----------------------------------------------'  `-----------'
+ */
+
+#define LAYOUT_wkl( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K2D,      K5C,      \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D,      K5A, K5D, K59, \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C,                K5B,      \
+    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B,      K3C,                     \
+    K40,      K42, K43,                          K49, K4A,      K4B, K4C, K4D                 \
+) \
+{ \
+    { K00,  K01,  K02,  K03,  K04,  K05,  K06,  K07,  K08,  K09,  K0A,  K0B,  K0C,  K0D  }, \
+    { K10,  K11,  K12,  K13,  K14,  K15,  K16,  K17,  K18,  K19,  K1A,  K1B,  K1C,  K1D  }, \
+    { K20,  K21,  K22,  K23,  K24,  K25,  K26,  K27,  K28,  K29,  K2A,  K2B,  K2C,  K2D  }, \
+    { K30,  K31,  K32,  K33,  K34,  K35,  K36,  K37,  K38,  K39,  K3A,  K3B,  K3C,  XXX  }, \
+    { K40,  XXX,  K42,  K43,  XXX,  XXX,  XXX,  XXX,  XXX,  K49,  K4A,  K4B,  K4C,  K4D  }, \
+    { XXX,  XXX,  XXX,  XXX,  XXX,  XXX,  XXX,  XXX,  XXX,  K59,  K5A,  K5B,  K5C,  K5D  }  \
+} 

keyboards/drakon/info.json

@@ -0,0 +1,15 @@
+{
+    "keyboard_name": "drakon",
+    "url": "",
+    "maintainer": "jagdpietr",
+    "width": 18.25,
+    "height": 5.25,
+    "layouts": {
+        "LAYOUT_ansi": {
+            "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":16.25, "y":0}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1, "w":1.5}, {"x":15.25, "y":1}, {"x":16.25, "y":1}, {"x":17.25, "y":1}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2, "w":2.25}, {"x":16.25, "y":2}, {"x":0, "y":3, "w":2.25}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":1.25}, {"x":13.75, "y":3.25}, {"x":0, "y":4, "w":1.25}, {"x":1.25, "y":4, "w":1.25}, {"x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"x":10, "y":4, "w":1.25}, {"x":11.25, "y":4, "w":1.25}, {"x":12.75, "y":4.25}, {"x":13.75, "y":4.25}, {"x":14.75, "y":4.25}]
+        },
+        "LAYOUT_wkl": {
+            "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":16.25, "y":0}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1, "w":1.5}, {"x":15.25, "y":1}, {"x":16.25, "y":1}, {"x":17.25, "y":1}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2, "w":2.25}, {"x":16.25, "y":2}, {"x":0, "y":3, "w":2.25}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":1.25}, {"x":13.75, "y":3.25}, {"x":0, "y":4, "w":1.25}, {"x":1.75, "y":4, "w":1.25}, {"x":3, "y":4, "w":7}, {"x":10, "y":4, "w":1.25}, {"x":11.25, "y":4, "w":1.25}, {"x":12.75, "y":4.25}, {"x":13.75, "y":4.25}, {"x":14.75, "y":4.25}]
+        }
+    }
+}

keyboards/drakon/keymaps/default/config.h

@@ -0,0 +1,19 @@
+/* Copyright 2020 jagdpietr
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+// place overrides here