Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

Slicer just crash #4

Closed
Eriobis opened this issue Nov 2, 2016 · 9 comments
Closed

Slicer just crash #4

Eriobis opened this issue Nov 2, 2016 · 9 comments

Comments

@Eriobis
Copy link

Eriobis commented Nov 2, 2016

Version

1.31.2

Operating system type + version

Windows 7

Behavior

When I open the slic3r, load a file then the screen is not responding.

I don't think a screenshot is necessary. The perl interpreter crash after sometimes

STL/Config (.ZIP) where problem occurs
@Eriobis
Copy link
Author

Eriobis commented Nov 2, 2016

WER61F3.tmp.appcompat.txt

@bubnikv
Copy link
Collaborator

bubnikv commented Nov 2, 2016

Thanks for the report.

What windows 7 version? 32bit? 64bit? what service pack? What Slic3r? 32bit or 64bit?

You did not manage to attach the STL/Config files. So it hangs, but does not crash per se? Is it specific to a single STL, or is it a general problem? Is it a large STL? How much RAM do you have?

It really helps, if you could give as much detail as possible.

Vojtech

@Eriobis
Copy link
Author

Eriobis commented Nov 2, 2016

I'm using Windows 7 64 bits with the 64 bits slic3r on the latest windows 7 ( I suppose service pack 1 )
I have 32g of ram.
The software hang for a while, until I see the perl interpreter crash window. ( Can I change the version of perl or all the dependencies come with slic3r? )

I coudn't send the stl , even in .zip github wouldn't let me upload the file ( its a small file tho ). I will upload it elsewhere and send you the link

@bubnikv
Copy link
Collaborator

bubnikv commented Nov 4, 2016

Isn't it a duplicate of a following issue?
#11 (comment)

Does the crash disappear if you go to preferences and uncheck the auto-center parts checkbox? If so, then it is most likely a duplicate of issue #11 and it has already been fixed.

@Eriobis
Copy link
Author

Eriobis commented Nov 4, 2016

Nop ... the problem is the same.
I tried with other file ( the treefrog by example ), it has the exact same behavior. At least the bug is easy to reproduce :P I only have to load a file hehe

@bubnikv
Copy link
Collaborator

bubnikv commented Nov 4, 2016

The software hang for a while, until I see the perl interpreter crash
window.

What does the crash window say?

We had a customer with a laptop with a dual graphics card. Slic3r refused
to run, if the 2nd graphics card was enabled. Once he disabled the 2nd
graphics card, Slic3r ran.

On Fri, Nov 4, 2016 at 10:43 PM, Simon Benoit [email protected]
wrote:

Nop ... the problem is the same.
I tried with other file ( the treefrog by example ), it has the exact same
behavior. At least the bug is easy to reproduce :P I only have to load a
file hehe

—
You are receiving this because you commented.
Reply to this email directly, view it on GitHub
#4 (comment), or mute
the thread
https://github.com/notifications/unsubscribe-auth/AFj5I0_Ui5szBasqAno_eQpGqMesuzW9ks5q66cSgaJpZM4KmwcJ
.

@Eriobis
Copy link
Author

Eriobis commented Nov 4, 2016 •
edited
Loading

I attached the dump file on the 1st post.

Now the UI is responding, ( I can focus and move the window ) anything else is hung and waising for something ...

slic3r_crash

@bubnikv
Copy link
Collaborator

bubnikv commented Nov 4, 2016

I just found out there is an issue with the newest Strawberry Perl and
exception handling. I have to set up the build server to use an older
version of Strawberry Perl for building the 64bit Slic3r builds. You can
try our 32bit Slic3r build, whether it behaves better. Likely it will not
slice, but it will display some explanation why it does not.

On Fri, Nov 4, 2016 at 11:57 PM, Simon Benoit [email protected]
wrote:

I attached the dump file on the 1st post.
[image: slic3r_crash]
https://cloud.githubusercontent.com/assets/9793935/20024974/98218606-a2c0-11e6-8d82-f44a2000387d.png

—
You are receiving this because you commented.
Reply to this email directly, view it on GitHub
#4 (comment), or mute
the thread
https://github.com/notifications/unsubscribe-auth/AFj5IxcT1nJdy6LfvXeUFRoH7ka1s6lJks5q67h2gaJpZM4KmwcJ
.

@Eriobis
Copy link
Author

Eriobis commented Nov 7, 2016

Okay sorry for the delay,

The 32 bit version works fine for the moment.
I will load some heavy file tonight, for the moment the treefrog works good.

I will close the issue since there's a workaround

@Eriobis Eriobis closed this as completed Nov 7, 2016
@Snowflake6 Snowflake6 mentioned this issue Nov 30, 2017
Closed
@tritol tritol mentioned this issue Jan 3, 2019
Closed
@balert balert mentioned this issue Feb 25, 2019
Closed
@gabtremblay gabtremblay mentioned this issue Mar 22, 2019
Closed
@bubnikv bubnikv mentioned this issue May 20, 2019
Closed
@lukasmatena lukasmatena mentioned this issue May 22, 2019
Closed
@lukasmatena lukasmatena mentioned this issue Jun 26, 2019
Closed
@lukasmatena lukasmatena mentioned this issue Aug 6, 2019
Closed
@GarthSnyder GarthSnyder mentioned this issue Nov 20, 2019
Closed
@lukasmatena lukasmatena mentioned this issue Nov 21, 2019
Open
@FlailAway FlailAway mentioned this issue Feb 20, 2020
Closed
@wavexx wavexx mentioned this issue Apr 1, 2020
Closed
wavexx pushed a commit to wavexx/PrusaSlicer that referenced this issue Sep 21, 2020
prusa3d#4 perimeter overlaps : total control over perimeter width vs …
bbbb4d9 
…spacing.

 - add a spacing_ratio in flow, but it's only sed for two spacing in perimeter_generator, not sure about the usefulness of it.
 - external_perimeter_overlap now use the spacing_ratio to compute
 - add perimeter_overlap, using the spacing_ratio to compute
 - add perimeter_bonding, that shrink the external-internal spacing, without growing the infill polygons.
@bubnikv bubnikv mentioned this issue Oct 16, 2020
Closed
@yopla31 yopla31 mentioned this issue Dec 27, 2020
Open
@bubnikv bubnikv mentioned this issue Jan 12, 2021
Closed
@m3cinc m3cinc mentioned this issue Sep 16, 2021
Closed
@sl1pkn07 sl1pkn07 mentioned this issue Sep 23, 2021
Closed
@zaitcev zaitcev mentioned this issue Nov 5, 2021
Closed
@tommylux tommylux mentioned this issue Apr 10, 2022
Closed
2 tasks
@maxhambraeus maxhambraeus mentioned this issue May 9, 2022
Closed
2 tasks
Closed
2 tasks
@rrroonn rrroonn mentioned this issue Aug 25, 2022
Closed
2 tasks
@Sargastic Sargastic mentioned this issue Nov 23, 2022
Closed
2 tasks
@ghost ghost mentioned this issue Feb 21, 2023
Closed
@DavidCPlatt DavidCPlatt mentioned this issue Jul 11, 2023
Open
2 tasks
@KawasakiNinjaH2R KawasakiNinjaH2R mentioned this issue Sep 12, 2023
Open
2 tasks
@jormundgand jormundgand mentioned this issue Jun 10, 2024
Closed
@Dollton Dollton mentioned this issue Jul 2, 2024
Open
2 tasks
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Assignees
No one assigned
Labels
None yet
Projects
None yet
Milestone
No milestone
Development

No branches or pull requests
2 participants
@bubnikv @Eriobis