Adding checks to helm charts

README.md

@@ -36,7 +36,7 @@ The operator itself is built with the [Operator framework](https://github.com/op
 
 ## Usage
 
-We recommend using our [helm charts](charts) for all installation and upgrades. Since version 0.2.8 onwards, the helm charts for zookeeper operator and zookeeper cluster are published in [https://charts.pravega.io/](https://charts.pravega.io/). To add this repository to your Helm repos, use the following command
+We recommend using our [helm charts](charts) for all installation and upgrades. Since version 0.2.8 onwards, the helm charts for zookeeper operator and zookeeper cluster are published in [https://charts.pravega.io](https://charts.pravega.io/). To add this repository to your Helm repos, use the following command
 ```
 helm repo add pravega https://charts.pravega.io
 ```

charts/zookeeper-operator/README.md

@@ -12,30 +12,32 @@ This chart bootstraps a [Zookeeper Operator](https://github.com/pravega/zookeepe
 
 ## Installing the Chart
 
-To install the chart with the release name `my-release`:
+To install the zookeeper-operator chart, use the following commands:
 
 ```
 $ helm repo add pravega https://charts.pravega.io
 $ helm repo update
-$ helm install my-release pravega/zookeeper-operator --version=`version`
+$ helm install [RELEASE_NAME] pravega/zookeeper-operator --version=[VERSION]
 ```
-Note: `version` can be any stable release version for zookeeper operator from 0.2.8 onwards.
+- **[RELEASE_NAME]** is the release name for the zookeeper-operator chart.
+- **[DEPLOYMENT_NAME]** is the name of the zookeeper-operator deployment so created. (If [RELEASE_NAME] contains the string `zookeeper-operator`, `[DEPLOYMENT_NAME] = [RELEASE_NAME]`, else `[DEPLOYMENT_NAME] = [RELEASE_NAME]-zookeeper-operator`. The [DEPLOYMENT_NAME] can however be overridden by providing `--set fullnameOverride=[DEPLOYMENT_NAME]` along with the helm install command)
+- **[VERSION]** can be any stable release version for zookeeper-operator from 0.2.8 onwards.
 
-The above command deploys zookeeper-operator on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation.
+This command deploys a zookeeper-operator on the Kubernetes cluster in its default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation.
 
 ## Uninstalling the Chart
 
-To uninstall/delete the deployment `my-release`:
+To uninstall/delete the zookeeper-operator chart, use the following command:
 
 ```
-$ helm uninstall my-release
+$ helm uninstall [RELEASE_NAME]
 ```
 
 The command removes all the Kubernetes components associated with the chart and deletes the release.
 
 ## Configuration
 
-The following table lists the configurable parameters of the Zookeeper operator chart and their default values.
+The following table lists the configurable parameters of the zookeeper-operator chart and their default values.
 
 | Parameter | Description | Default |
 | ----- | ----------- | ------ |

charts/zookeeper-operator/templates/operator.yaml

@@ -37,17 +37,17 @@ spec:
           value: {{ template "zookeeper-operator.fullname" . }}
         {{- if .Values.resources }}
         resources:
-          {{ toYaml .Values.resources | nindent 10 }}
+{{ toYaml .Values.resources | indent 10 }}
         {{- end }}
       {{- if .Values.nodeSelector }}
       nodeSelector:
-        {{ toYaml .Values.nodeSelector | nindent 8 }}
+{{ toYaml .Values.nodeSelector | indent 8 }}
       {{- end }}
       {{- if .Values.affinity }}
       affinity:
-        {{ toYaml .Values.affinity | nindent 8 }}
+{{ toYaml .Values.affinity | indent 8 }}
       {{- end }}
       {{- if .Values.tolerations }}
       tolerations:
-        {{ toYaml .Values.tolerations | nindent 8 }}
+{{ toYaml .Values.tolerations | indent 8 }}
       {{- end }}

charts/zookeeper/README.md

@@ -14,39 +14,42 @@ This chart creates a Zookeeper cluster in [Kubernetes](http://kubernetes.io) usi
 
 ## Installing the Chart
 
-To install the chart with the release name `my-release`:
+To install the zookeeper chart, use the following commands:
 
 ```
 $ helm repo add pravega https://charts.pravega.io
 $ helm repo update
-$ helm install my-release pravega/zookeeper --version=`version`
+$ helm install [RELEASE_NAME] pravega/zookeeper --version=[VERSION]
 ```
-Note: `version` can be any stable release version for zookeeper from 0.2.8 onwards.
+where:
+- **[RELEASE_NAME]** is the release name for the zookeeper chart.
+- **[CLUSTER_NAME]** is the name of the zookeeper cluster so created. (If [RELEASE_NAME] contains the string `zookeeper`, `[CLUSTER_NAME] = [RELEASE_NAME]`, else `[CLUSTER_NAME] = [RELEASE_NAME]-zookeeper`. The [CLUSTER_NAME] can however be overridden by providing `--set fullnameOverride=[CLUSTER_NAME]` along with the helm install command)
+- **[VERSION]** can be any stable release version for zookeeper from 0.2.8 onwards.
 
-The above command deploys zookeeper on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation.
+This command deploys zookeeper on the Kubernetes cluster in its default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation.
 
 ## Upgrading the Chart
 
-To upgrade the zookeeper cluster `my-release` from a version `x` to `y`:
+To upgrade the zookeeper chart from version **[OLD_VERSION]** to version **[NEW_VERSION]**, use the following command:
 
 ```
-$ helm upgrade my-release pravega/zookeeper --version=y --set image.tag=y --reuse-values --timeout 600s
+$ helm upgrade [RELEASE_NAME] pravega/zookeeper --version=[NEW_VERSION] --set image.tag=[NEW_VERSION] --reuse-values --timeout 600s
 ```
-Note: By specifying the `--reuse-values` option, the values of all parameters are retained across upgrades. However if some values need to be modified during the upgrade, the `--set` flag can be used to specify the new values of these parameters. Also, by skipping the `reuse-values` flag, the values of all parameters are reset to their default values specified in the charts published for version `y`.
+**Note:** By specifying the `--reuse-values` option, the configuration of all parameters are retained across upgrades. However if some values need to be modified during the upgrade, the `--set` flag can be used to specify the new configuration for these parameters. Also, by skipping the `reuse-values` flag, the values of all parameters are reset to the default configuration that has been specified in the published charts for version [NEW_VERSION].
 
 ## Uninstalling the Chart
 
-To uninstall/delete the zookeeper cluster `my-release`:
+To uninstall/delete the zookeeper chart, use the following command:
 
 ```
-$ helm uninstall my-release
+$ helm uninstall [RELEASE_NAME]
 ```
 
-The command removes all the Kubernetes components associated with the chart and deletes the release.
+This command removes all the Kubernetes components associated with the chart and deletes the release.
 
 ## Configuration
 
-The following table lists the configurable parameters of the Zookeeper chart and their default values.
+The following table lists the configurable parameters of the zookeeper chart and their default values.
 
 | Parameter | Description | Default |
 | ----- | ----------- | ------ |
@@ -66,8 +69,8 @@ The following table lists the configurable parameters of the Zookeeper chart and
 | `pod.tolerations` | Specifies the pod's tolerations | `[]` |
 | `pod.env` | List of environment variables to set in the container | `[]` |
 | `pod.annotations` | Specifies the annotations to attach to pods | `{}` |
-| `pod.securityContext` | Specifies the security context for the entire pod | |
-| `pod.terminationGracePeriodSeconds` | Amount of time given to the pod to shutdown normally | `180` |
+| `pod.securityContext` | Specifies the security context for the entire pod | `{}` |
+| `pod.terminationGracePeriodSeconds` | Amount of time given to the pod to shutdown normally | `30` |
 | `config.initLimit` | Amount of time (in ticks) to allow followers to connect and sync to a leader | `10` |
 | `config.tickTime` | Length of a single tick which is the basic time unit used by Zookeeper (measured in milliseconds) | `2000` |
 | `config.syncLimit` | Amount of time (in ticks) to allow followers to sync with Zookeeper | `2` |
@@ -77,6 +80,6 @@ The following table lists the configurable parameters of the Zookeeper chart and
 | `persistence.storageClassName` | Storage class for persistent volumes | `standard` |
 | `persistence.volumeSize` | Size of the volume requested for persistent volumes | `20Gi` |
 | `ephemeral.emptydirvolumesource.medium` |  What type of storage medium should back the directory. | `""` |
-| `ephemeral.emptydirvolumesource.sizeLimit` | Total amount of local storage required for the EmptyDir volume. | |
+| `ephemeral.emptydirvolumesource.sizeLimit` | Total amount of local storage required for the EmptyDir volume. | `20Gi` |
 | `containers` | Application containers run with the zookeeper pod | `[]` |
 | `volumes` | Named volumes that may be accessed by any container in the pod | `[]` |

charts/zookeeper/templates/zookeeper.yaml

@@ -15,36 +15,70 @@ spec:
   domainName: {{ .Values.domainName }}
   {{- end }}
   kubernetesClusterDomain: {{ default "cluster.local" .Values.kubernetesClusterDomain }}
+  {{- if .Values.containers }}
+  containers:
+{{ toYaml .Values.containers | indent 4 }}
+  {{- end }}
+  {{- if .Values.volumes }}
+  volumes:
+{{ toYaml .Values.volumes | indent 4 }}
+  {{- end }}
   labels:
 {{ toYaml .Values.labels | indent 4 }}
   ports:
 {{ toYaml .Values.ports | indent 4 }}
   {{- if .Values.pod }}
   pod:
+    {{- if .Values.pod.labels }}
     labels:
 {{ toYaml .Values.pod.labels | indent 6 }}
+    {{- end }}
+    {{- if .Values.pod.nodeSelector }}
     nodeSelector:
 {{ toYaml .Values.pod.nodeSelector | indent 6 }}
+    {{- end }}
+    {{- if .Values.pod.affinity }}
     affinity:
 {{ toYaml .Values.pod.affinity | indent 6 }}
+    {{- end }}
+    {{- if .Values.pod.resources }}
     resources:
 {{ toYaml .Values.pod.resources | indent 6 }}
+    {{- end }}
+    {{- if .Values.pod.tolerations }}
     tolerations:
 {{ toYaml .Values.pod.tolerations | indent 6 }}
+    {{- end }}
+    {{- if .Values.pod.env }}
     env:
 {{ toYaml .Values.pod.env | indent 6 }}
+    {{- end }}
+    {{- if .Values.pod.annotations }}
     annotations:
 {{ toYaml .Values.pod.annotations | indent 6 }}
+    {{- end }}
+    {{- if .Values.pod.securityContext }}
     securityContext:
 {{ toYaml .Values.pod.securityContext | indent 6 }}
+    {{- end }}
+    {{- if .Values.pod.terminationGracePeriodSeconds }}
     terminationGracePeriodSeconds: {{ .Values.pod.terminationGracePeriodSeconds }}
+    {{- end }}
   {{- end }}
   {{- if .Values.config }}
   config:
+    {{- if .Values.config.initLimit }}
     initLimit: {{ .Values.config.initLimit }}
+    {{- end }}
+    {{- if .Values.config.tickTime }}
     tickTime: {{ .Values.config.tickTime }}
+    {{- end }}
+    {{- if .Values.config.syncLimit }}
     syncLimit: {{ .Values.config.syncLimit }}
+    {{- end }}
+    {{- if .Values.config.quorumListenOnAllIPs }}
     quorumListenOnAllIPs: {{ .Values.config.quorumListenOnAllIPs }}
+    {{- end }}
   {{- end }}
   storageType: {{ default "persistence" .Values.storageType }}
   {{- if eq (default .Values.storageType "persistence") "ephemeral" }}

charts/zookeeper/values.yaml

@@ -18,8 +18,8 @@ pod: {}
   # tolerations: []
   # env: []
   # annotations: {}
-  # securityContext:
-  # terminationGracePeriodSeconds: 180
+  # securityContext: {}
+  # terminationGracePeriodSeconds: 30
 
 config: {}
   # initLimit: 10
@@ -43,8 +43,8 @@ ephemeral:
   emptydirvolumesource:
     ## specifying Medium for emptydirvolumesource
     ## accepted values - ""/Memory
-    #medium: ""
-    #sizeLimit: 20Gi
+    medium: ""
+    sizeLimit: 20Gi
 
 hooks:
   image: