Skip to content
Change the repository type filter

All

    Repositories list

    • Implementation of music sampler via (electronic drum set or keyboard).Use of the board's memory to send data to the audio codex on the DE2-115 Board to the board's audio output.
      Verilog
      5100Updated Dec 11, 2014Dec 11, 2014
    • The project is to build a MIPS micro-processor, which is composed of registers, ALUs, finite state machines, memories, and other logic building blocks. The microarchitecture can be separated into two parts: the datapath and the control. The datapath contains structures such as memories, registers, ALUs, and multiplexers. The control unit receive…
      VHDL
      3100Updated Dec 10, 2014Dec 10, 2014
    • We will be design a gesture capturing music controlling system by using the NIOS I and the Altera FPGA boards. We will divide the project into 2 steps, the firstep is tha we wil build an interface whicould upload the music tohe FPGA and the NIOS I processor, the scond step is tha we wil use a gesture capturing sytem linked withe FPA and NIOS I p…
      Verilog
      1000Updated Dec 9, 2014Dec 9, 2014
    • The purpose of this project is to build an interactive version of the game brick breaker using an FPGA. It will be programmed using Verilog. The game will require a design of graphics, mouse control, and the creation of a round ball. Also I need to work on the aspects of the control of the ball. This also includes the ball interactions with the …
      VHDL
      0000Updated Dec 9, 2014Dec 9, 2014
    • Our project is basically a solar panel system that will adjust its position to keep the panel perpendicular to the sun/light source so that the panel generates optimal power. The system will have LDR sensors, each of which will have a light dependent resistance value. When panel is perpendicular to the light source, the LDR sensors should have t…
      VHDL
      1000Updated Dec 9, 2014Dec 9, 2014
    • Real time active noise cancellation filter. The filter will increase signal to noise ratio by decreasing noise. This system is used in cellular phones and high tech headphones.
      VHDL
      2500Updated Dec 9, 2014Dec 9, 2014
    • Tap-Tap

      Public
      For our project, we plan to create a game similar to the popular game, Tap Tap (http://en.wikipedia.org/wiki/Tap_Tap). In the game, a series of inputs will scroll down the display and the player must press each input at the correct time. The inputs are synchronized to a song. A flash game similar to what we wish to create can be found here: http…
      VHDL
      0400Updated Dec 9, 2014Dec 9, 2014
    • I propose to make the FPGA control christmas lights base on the frequency and volume of music. This should work for any song and in real time using a mic as the input sampling at short intervals. I will adjust the lights present to the BPM of the song. I will need to build a solid state relay to source power for the lights.
      1000Updated Dec 8, 2014Dec 8, 2014
    • NGC-Sonar

      Public
      This project aims to use the Cyclone IV E FPGA board and one or more Parallax ping sonar sensors to track objects in 3D at short range. Using an external display, we will display position and distance of the object from the sensor array.
      VHDL
      7600Updated Dec 13, 2013Dec 13, 2013
    • FPGA project with Mark Zoppina and Jon Liang
      Verilog
      0000Updated Dec 13, 2013Dec 13, 2013
    •  Our project is the system that enables a moving camera to track a moving object in real time. We plan on doing this by having a camera mounted to a swivel using two servo motors to allow for the camera’s direction to be controlled. The camera data will be read into the FPGA board and some basic object recognition algorithm will be used to  iden…
      VHDL
      113100Updated Dec 10, 2013Dec 10, 2013
    • The project aims at developing a DDS based function generator to generate a sine wave frequency sweep in the range of 390 kHz. For doing this the FPGA will be used to run the dds algorithm and then a DAC and a reconstruction filter will be interfaced of the required order to have a final output on the CRO.
      VHDL
      3200Updated Dec 10, 2013Dec 10, 2013
    • RC-Rover

      Public
      We will build a rover using 4 gearhead motors and use an IR remote controller to control the motors.
      VHDL
      0000Updated Dec 10, 2013Dec 10, 2013
    • In our project we intend to implement a two way half-duplex communication system on Altera DE2-115 boards. Our system will have two FPGA’s connected via an Ethernet cable. Each FPGA board will have a speaker and microphone connected to it. Using this microphone a person sitting next to one board will be able send an audio message to a person sit…
      Verilog
      0100Updated Dec 9, 2013Dec 9, 2013
    • We intend to create an audio synthesizer. The sound will be sent out through line out or headphone jacks on the Altera board. We will start out simple and add to it as time permits. To begin with, we will get different notes played when different buttons are pressed on the board. The switches could be used to change pitch so the 4 buttons on the…
      VHDL
      2100Updated Dec 8, 2013Dec 8, 2013