Implementation of music sampler via (electronic drum set or keyboard).Use of the board's memory to send data to the audio codex on the DE2-115 Board to the board's audio output.

The project is to build a MIPS micro-processor, which is composed of registers, ALUs, finite state machines, memories, and other logic building blocks. The microarchitecture can be separated into two parts: the datapath and the control. The datapath contains structures such as memories, registers, ALUs, and multiplexers. The control unit receive…

We will be design a gesture capturing music controlling system by using the NIOS I and the Altera FPGA boards. We will divide the project into 2 steps, the firstep is tha we wil build an interface whicould upload the music tohe FPGA and the NIOS I processor, the scond step is tha we wil use a gesture capturing sytem linked withe FPA and NIOS I p…

The purpose of this project is to build an interactive version of the game brick breaker using an FPGA. It will be programmed using Verilog. The game will require a design of graphics, mouse control, and the creation of a round ball. Also I need to work on the aspects of the control of the ball. This also includes the ball interactions with the …

Our project is basically a solar panel system that will adjust its position to keep the panel perpendicular to the sun/light source so that the panel generates optimal power. The system will have LDR sensors, each of which will have a light dependent resistance value. When panel is perpendicular to the light source, the LDR sensors should have t…

Real time active noise cancellation filter. The filter will increase signal to noise ratio by decreasing noise. This system is used in cellular phones and high tech headphones.

For our project, we plan to create a game similar to the popular game, Tap Tap (http://en.wikipedia.org/wiki/Tap_Tap). In the game, a series of inputs will scroll down the display and the player must press each input at the correct time. The inputs are synchronized to a song. A flash game similar to what we wish to create can be found here: http…

I propose to make the FPGA control christmas lights base on the frequency and volume of music. This should work for any song and in real time using a mic as the input sampling at short intervals. I will adjust the lights present to the BPM of the song. I will need to build a solid state relay to source power for the lights.

This project aims to use the Cyclone IV E FPGA board and one or more Parallax ping sonar sensors to track objects in 3D at short range. Using an external display, we will display position and distance of the object from the sensor array.

FPGA project with Mark Zoppina and Jon Liang