This repository has been archived by the owner on May 17, 2021. It is now read-only.
-
-
Notifications
You must be signed in to change notification settings - Fork 1.7k
Nibe Heat Pump Binding
paulianttila edited this page Nov 25, 2013
·
9 revisions
Documentation of the Nibe Heatpump binding Bundle
Nibe heat pump binding is used to get live data from from Nibe heat pumps without modbus adapter. Binding should be compatible at least F1145 and F1245 heat pump models.
When modbus adapter support is enabled from heat pump UI, heat pump will start to send telegram ones every now and then. Telegram contains max 20 registers. Those 20 registers can be configured via Nibe ModbusManager application.
Unfortunately Nibe has made this tricky, telegram from heat pump should be acknowledged, otherwise pump will raise an alarm and go in alarm state. Acknowledge (ACK or NAK) should be sent accurately. This can be resolved by nibegw which can be run on unix/linux (e.g raspberry pi) or arduino based boards.
nibegw is application read telegram from serial port (need RS-485 adapter), send ACK/NAK to the heat pump and relay untouched telegram to openhab via UDP packet. Nibe heat pump binding will listening UDP port and parse register data from UDP telegrams.
Arduino based solution, tested with arduino uno + RS485 and Ethernet shields.
Arduino code is available here
C code is available on here
build command:
gcc -std=gnu99 -o nibegw nibegw.c
execution:
nibegw -v -d /dev/ttyUSB0 -a 192.168.1.10
Nibegw help is avail be by command execution:
nibegw -h
For installation of the binding, please see Wiki page Bindings.
openhab.cfg file (in the folder '${openhab_home}/configurations').
######################## NIBE HEAT PUMP Binding ########################################
#
# UDP port
# nibeheatpump:udpPort=9999
The nibeheatpump:udpPort value specify UDP port which binding will listening. Configuration is optional, by default binding listening UDP port 9999.
In order to bind an item to the device, you need to provide configuration settings. The easiest way to do so is to add some binding information in your item file (in the folder configurations/items`). The syntax of the binding configuration strings accepted is the following:
nibeheatpump="<coilAddress>"
Where
<coilAddress> corresponds the MODBUS coil addresses. See complite list below.
| Address | Item Type | Purpose | Note |
|---|---|---|---|
| 47332 | Number | Cooling supply temp at 20C | |
| 47333 | Number | Cooling supply temp at 40C | |
| 47334 | Number | Cooling close mixing valves | |
| 47335 | Number | Time between switch heat/cooling | |
| 47329 | Number | Cooling 2-pipe accessory | |
| 47330 | Number | Cooling 4-pipe accessory | |
| 47331 | Number | Min cooling supply temp | |
| 47340 | Number | Cooling with room sensor | |
| 47336 | Number | Heat at room under temp | |
| 47337 | Number | Cool at room over temp | |
| 47338 | Number | Cooling mixing valve amp | |
| 47339 | Number | Cooling mixing valve step delay | |
| 47319 | Number | Shunt controlled add min runtime | |
| 47318 | Number | Shunt controlled add min temp | |
| 47317 | Number | Shunt controlled addition accessory | |
| 40152 | Number | BT71 ext return temp | |
| 47313 | Number | FLM defrost | |
| 47312 | Number | FLM pump | |
| 47327 | Number | Ground water pump accessory | |
| 47326 | Number | Step controlled add mode | |
| 47324 | Number | Step controlled add diff DM | |
| 47323 | Number | Step controlled add start DM | |
| 47322 | Number | Step controlled add accessory | |
| 47321 | Number | Shunt controlled add mix valve wait | |
| 47320 | Number | Shunt controlled add mix valve amp | |
| 47302 | Number | Climate system 2 accessory | |
| 47303 | Number | Climate system 3 accessory | |
| 47310 | Number | Climate system 2 shunt wait | |
| 43516 | Number | PCA-Power relayes EP14 | |
| 47308 | Number | Climate system 4 shunt wait | |
| 47309 | Number | Climate system 3 shunt wait | |
| 43514 | Number | PCA-Base relayes EP14 | |
| 40128 | Number | EB22-BT3 return temp S3 | |
| 47306 | Number | Climate system 3 mixing valve amp | |
| 40129 | Number | EB21-BT3 return temp S2 | |
| 47307 | Number | Climate system 2 mixing valve amp | |
| 47304 | Number | Climate system 4 accessory | |
| 47305 | Number | Climate system 4 mixing valve amp | |
| 47281 | Number | Floor drying period 3 | |
| 47280 | Number | Floor drying period 4 | |
| 43395 | Number | HPAC relays | |
| 47283 | Number | Floor drying period 1 | |
| 47282 | Number | Floor drying period 2 | |
| 40127 | Number | EB23-BT3 return temp S4 | |
| 47285 | Number | Floor drying temp 6 | |
| 47284 | Number | Floor drying temp 7 | |
| 47287 | Number | Floor drying temp 4 | |
| 47286 | Number | Floor drying temp 5 | |
| 40115 | Number | AZ1-BT26 temp collector in FLM 2 | |
| 47289 | Number | Floor drying temp 2 | |
| 40114 | Number | AZ1-BT26 temp collector in FLM 3 | |
| 47288 | Number | Floor drying temp 3 | |
| 40113 | Number | AZ1-BT26 temp collector in FLM 4 | |
| 47291 | Number | Floor drying timer | |
| 40112 | Number | EB100-BT21 vented air temp | |
| 47290 | Number | Floor drying temp 1 | |
| 40118 | Number | AZ1-BT27 temp collector out FLM 2 | |
| 40117 | Number | AZ1-BT27 temp collector out FLM 3 | |
| 40116 | Number | AZ1-BT27 temp collector out FLM 4 | |
| 47264 | Number | Exhaust fan speed 1 | |
| 40107 | Number | EB100-BT20 exhaust air temp | |
| 47265 | Number | Exhaust fan speed normal | |
| 40110 | Number | EB100-BT21 vented air temp | |
| 40111 | Number | EB100-BT21 vented air temp | |
| 40108 | Number | EB100-BT20 exhaust air temp | |
| 40109 | Number | EB100-BT20 exhaust air temp | |
| 47271 | Number | Fan return time 4 | |
| 43416 | Number | Compressor starts EB100-EP14 | |
| 47272 | Number | Fan return time 3 | |
| 47273 | Number | Fan return time 2 | |
| 47274 | Number | Fan return time 1 | |
| 47275 | Number | Filter reminder period | |
| 43420 | Number | Total operation time compressor | |
| 47276 | Number | Floor drying | |
| 47277 | Number | Floor drying period 7 | |
| 47278 | Number | Floor drying period 6 | |
| 47279 | Number | Floor drying period 5 | |
| 45001 | Number | Alarm number | |
| 43427 | Number | Compressor state EP14 | |
| 43424 | Number | Total hot water operation time compr | |
| 40081 | Number | EB100-BE1 current phase 2 | |
| 40083 | Number | EB100-BE1 current phase 1 | |
| 47263 | Number | Exhaust fan speed 2 | |
| 47262 | Number | Exhaust fan speed 3 | |
| 47261 | Number | Exhaust fan speed 4 | |
| 40072 | Number | BF1 Flow | |
| 40074 | Number | EB100-FR1 anode status | |
| 40079 | Number | EB100-BE1 current phase 3 | |
| 40067 | Number | EM1-BT52 boiler temperature | |
| 40070 | Number | BT25 external supply temp | |
| 40071 | Number | BT25 external supply temp | |
| 40054 | Number | EB100-FD1 temperature limiter | |
| 47212 | Number | Max int addition power | |
| 47214 | Number | Fuse | |
| 47209 | Number | DM between addition steps | |
| 47208 | Number | DM start addition | |
| 40033 | Number | BT50 room temp S1 | |
| 40032 | Number | EB21-BT50 room temp S2 | |
| 47210 | Number | DM start addition with shunt | |
| 40046 | Number | EQ1-BT65 PCS4 return temp | |
| 40045 | Number | EQ1-BT64 PCS4 supply temp | |
| 47207 | Number | DM start cooling | |
| 40044 | Number | EP8-BT54 solar load temp | |
| 47206 | Number | DM start heating | |
| 40043 | Number | EP8-BT53 solar panel temp | |
| 40042 | Number | CL11-BT51 pool 1 temp | |
| 40022 | Number | EB100-EP14-BT17 suction | |
| 40016 | Number | EB100-EP14-BT11 brine out temp | |
| 40017 | Number | EB100-EP14-BT12 cond out | |
| 40018 | Number | EB100-EP14-BT14 hot gas temp | |
| 40019 | Number | EB100-EP14-BT15 liquid line | |
| 40028 | Number | AZ1-BT26 temp collector in FLM 1 | |
| 40029 | Number | AZ1-BT27 temp collector out FLM 1 | |
| 40030 | Number | EB23-BT50 room temp S4 | |
| 40031 | Number | EB22-BT50 room temp S3 | |
| 40025 | Number | EB100-BT20 exhaust air temp | |
| 40026 | Number | EB100-BT21 vented air temp | |
| 40005 | Number | EB23-BT2 supply temp S4 | |
| 40004 | Number | BT1 outdoor temp | |
| 40007 | Number | EB21-BT2 supply temp S2 | |
| 40006 | Number | EB22-BT2 supply temp S3 | |
| 40013 | Number | BT6 hot water top | |
| 40012 | Number | EB100-EP14-BT3 return temp | |
| 40015 | Number | EB100-EP14-BT10 brine in temp | |
| 40014 | Number | BT6 hot water load | |
| 40008 | Number | BT2 supply temp S1 | |
| 43001 | Number | Software version | |
| 43006 | Number | Calculated supply temp S4 | |
| 43007 | Number | Calculated supply temp S3 | |
| 43005 | Number | Degree minutes | |
| 47136 | Number | Period pool | |
| 47139 | Number | Operational mode brine medium pump | |
| 47138 | Number | Operational mode heat medium pump | |
| 47131 | Number | Language | |
| 47134 | Number | Period hot water | |
| 47135 | Number | Period heat | |
| 47133 | Number | Period pool 2 | |
| 48064 | Number | FLM 4 speed 3 | |
| 48065 | Number | FLM 4 speed 2 | |
| 48066 | Number | FLM 4 speed 1 | |
| 48067 | Number | FLM 4 speed normal | |
| 48068 | Number | FLM 4 accessory | |
| 48069 | Number | FLM 3 accessory | |
| 48070 | Number | FLM 2 accessory | |
| 48071 | Number | FLM 1 accessory | |
| 43230 | Number | Accumulated energy | |
| 48073 | Number | FLM cooling | |
| 48074 | Number | Set point for BT74 | |
| 48088 | Number | Pool 1 accesory | |
| 48090 | Number | Pool 1 start temp | |
| 48093 | Number | Pool 2 activated | |
| 48092 | Number | Pool 1 stop temp | |
| 48094 | Number | Pool 1 activated | |
| 48537 | Number | Night cooling | |
| 48539 | Number | Night cooling min diff | |
| 43239 | Number | Total hot water operation time add | |
| 47570 | Number | Operational mode | |
| 47538 | Number | Start room temp nigh cooling | |
| 48055 | Number | FLM 2 speed 2 | |
| 48054 | Number | FLM 2 speed 3 | |
| 48053 | Number | FLM 2 speed 4 | |
| 48063 | Number | FLM 4 speed 4 | |
| 48062 | Number | FLM 3 speed normal | |
| 48061 | Number | FLM 3 speed 1 | |
| 48060 | Number | FLM 3 speed 2 | |
| 48059 | Number | FLM 3 speed 3 | |
| 48058 | Number | FLM 3 speed 4 | |
| 48057 | Number | FLM 2 speed normal | |
| 48056 | Number | FLM 2 speed 1 | |
| 47005 | Number | Heat curve S3 | |
| 43103 | Number | HPAC state | |
| 47004 | Number | Heat curve S4 | |
| 47007 | Number | Heat curve S1 | |
| 47006 | Number | Heat curve S2 | |
| 43091 | Number | Internal electrical addition state | |
| 43086 | Number | Prio | |
| 43084 | Number | Internal electrical addition power | |
| 43081 | Number | Total operation time addition | |
| 47036 | Number | External adjust with room sensor S1 | |
| 47035 | Number | External adjust with room sensor S2 | |
| 47034 | Number | External adjust with room sensor S3 | |
| 47033 | Number | External adjust with room sensor S4 | |
| 47032 | Number | External adjustment S1 | |
| 47031 | Number | External adjustment S2 | |
| 47030 | Number | External adjustment S3 | |
| 47029 | Number | External adjustment S4 | |
| 47028 | Number | Point offset | |
| 47027 | Number | Point offset outdoor temp | |
| 47026 | Number | Own curve P1 | |
| 47025 | Number | Own curve P2 | |
| 47024 | Number | Own curve P3 | |
| 47022 | Number | Own curve P5 | |
| 47023 | Number | Own curve P4 | |
| 47020 | Number | Own curve P7 | |
| 47021 | Number | Own curve P6 | |
| 47018 | Number | Max supply system 2 | |
| 47019 | Number | Max supply system 1 | |
| 47016 | Number | Max supply system 4 | |
| 47017 | Number | Max supply system 3 | |
| 47014 | Number | Min supply system 2 | |
| 47015 | Number | Min supply system 1 | |
| 47012 | Number | Min supply system 4 | |
| 47013 | Number | Min supply system 3 | |
| 47010 | Number | Offset S2 | |
| 47011 | Number | Offset S1 | |
| 47008 | Number | Offset S4 | |
| 47009 | Number | Offset S3 | |
| 47402 | Number | Room sensor factor S1 | |
| 47401 | Number | Room sensor factor S2 | |
| 47400 | Number | Room sensor factor S3 | |
| 47395 | Number | Room sensor setpoint S4 | |
| 47394 | Number | Use room sensor S1 | |
| 47393 | Number | Use room sensor S2 | |
| 47392 | Number | Use room sensor S3 | |
| 43024 | Number | Status cooling | |
| 47399 | Number | Room sensor factor S4 | |
| 47398 | Number | Room sensor setpoint S1 | |
| 47397 | Number | Room sensor setpoint S2 | |
| 47396 | Number | Room sensor setpoint S3 | |
| 47418 | Number | Speed brine pump | |
| 47048 | Number | Stop temperature hot water normal | |
| 47049 | Number | Stop temperature hot water economy | |
| 47416 | Number | Speed circ pump economy | |
| 47050 | Number | Periodic hot water | |
| 47417 | Number | Speed circ pump cooling | |
| 47051 | Number | Periodic hot water interval | |
| 43010 | Number | Calculated cooling supply temp | |
| 47041 | Number | Hot water mode | |
| 43008 | Number | Calculated supply temp S2 | |
| 43009 | Number | Calculated supply temp S1 | |
| 47043 | Number | Start temperature hot water luxury | |
| 47414 | Number | Speed circ pump heat | |
| 47044 | Number | Start temperature hot water normal | |
| 47415 | Number | Speed circ pump pool | |
| 47045 | Number | Start temperature hot water economy | |
| 47046 | Number | Stop temperature periodic hot water | |
| 47413 | Number | Speed circ pump hot water | |
| 43013 | Number | Freeze protection status | |
| 47047 | Number | Stop temperature hot water luxury | |
| 47384 | Number | Date format | |
| 47385 | Number | Time format | |
| 47387 | Number | Hot water production | |
| 47388 | Number | Alarm lower room temp | |
| 47389 | Number | Alarm lower HW temp | |
| 47391 | Number | Use room sensor S4 | |
| 47378 | Number | Max diff comp | |
| 47379 | Number | Max diff add | |
| 47380 | Number | Low brine out autoreset | |
| 47381 | Number | Low brine out temp | |
| 47382 | Number | High brine in | |
| 47383 | Number | High brine in temp | |
| 47332 | Number | Cooling supply temp at 20C | |
| 47333 | Number | Cooling supply temp at 40C | |
| 47334 | Number | Cooling close mixing valves | |
| 47335 | Number | Time between switch heat/cooling | |
| 47329 | Number | Cooling 2-pipe accessory | |
| 47330 | Number | Cooling 4-pipe accessory | |
| 47331 | Number | Min cooling supply temp | |
| 47340 | Number | Cooling with room sensor | |
| 47336 | Number | Heat at room under temp | |
| 47337 | Number | Cool at room over temp | |
| 47338 | Number | Cooling mixing valve amp | |
| 47339 | Number | Cooling mixing valve step delay | |
| 47319 | Number | Shunt controlled add min runtime | |
| 47318 | Number | Shunt controlled add min temp | |
| 47317 | Number | Shunt controlled addition accessory | |
| 40152 | Number | BT71 ext return temp | |
| 47313 | Number | FLM defrost | |
| 47312 | Number | FLM pump | |
| 47327 | Number | Ground water pump accessory | |
| 47326 | Number | Step controlled add mode | |
| 47324 | Number | Step controlled add diff DM | |
| 47323 | Number | Step controlled add start DM | |
| 47322 | Number | Step controlled add accessory | |
| 47321 | Number | Shunt controlled add mix valve wait | |
| 47320 | Number | Shunt controlled add mix valve amp | |
| 47302 | Number | Climate system 2 accessory | |
| 47303 | Number | Climate system 3 accessory | |
| 47310 | Number | Climate system 2 shunt wait | |
| 43516 | Number | PCA-Power relayes EP14 | |
| 47308 | Number | Climate system 4 shunt wait | |
| 47309 | Number | Climate system 3 shunt wait | |
| 43514 | Number | PCA-Base relayes EP14 | |
| 40128 | Number | EB22-BT3 return temp S3 | |
| 47306 | Number | Climate system 3 mixing valve amp | |
| 40129 | Number | EB21-BT3 return temp S2 | |
| 47307 | Number | Climate system 2 mixing valve amp | |
| 47304 | Number | Climate system 4 accessory | |
| 47305 | Number | Climate system 4 mixing valve amp | |
| 47281 | Number | Floor drying period 3 | |
| 47280 | Number | Floor drying period 4 | |
| 43395 | Number | HPAC relays | |
| 47283 | Number | Floor drying period 1 | |
| 47282 | Number | Floor drying period 2 | |
| 40127 | Number | EB23-BT3 return temp S4 | |
| 47285 | Number | Floor drying temp 6 | |
| 47284 | Number | Floor drying temp 7 | |
| 47287 | Number | Floor drying temp 4 | |
| 47286 | Number | Floor drying temp 5 | |
| 40115 | Number | AZ1-BT26 temp collector in FLM 2 | |
| 47289 | Number | Floor drying temp 2 | |
| 40114 | Number | AZ1-BT26 temp collector in FLM 3 | |
| 47288 | Number | Floor drying temp 3 | |
| 40113 | Number | AZ1-BT26 temp collector in FLM 4 | |
| 47291 | Number | Floor drying timer | |
| 40112 | Number | EB100-BT21 vented air temp | |
| 47290 | Number | Floor drying temp 1 | |
| 40118 | Number | AZ1-BT27 temp collector out FLM 2 | |
| 40117 | Number | AZ1-BT27 temp collector out FLM 3 | |
| 40116 | Number | AZ1-BT27 temp collector out FLM 4 | |
| 47264 | Number | Exhaust fan speed 1 | |
| 40107 | Number | EB100-BT20 exhaust air temp | |
| 47265 | Number | Exhaust fan speed normal | |
| 40110 | Number | EB100-BT21 vented air temp | |
| 40111 | Number | EB100-BT21 vented air temp | |
| 40108 | Number | EB100-BT20 exhaust air temp | |
| 40109 | Number | EB100-BT20 exhaust air temp | |
| 47271 | Number | Fan return time 4 | |
| 43416 | Number | Compressor starts EB100-EP14 | |
| 47272 | Number | Fan return time 3 | |
| 47273 | Number | Fan return time 2 | |
| 47274 | Number | Fan return time 1 | |
| 47275 | Number | Filter reminder period | |
| 43420 | Number | Total operation time compressor | |
| 47276 | Number | Floor drying | |
| 47277 | Number | Floor drying period 7 | |
| 47278 | Number | Floor drying period 6 | |
| 47279 | Number | Floor drying period 5 | |
| 45001 | Number | Alarm number | |
| 43427 | Number | Compressor state EP14 | |
| 43424 | Number | Total hot water operation time compr | |
| 40081 | Number | EB100-BE1 current phase 2 | |
| 40083 | Number | EB100-BE1 current phase 1 | |
| 47263 | Number | Exhaust fan speed 2 | |
| 47262 | Number | Exhaust fan speed 3 | |
| 47261 | Number | Exhaust fan speed 4 | |
| 40072 | Number | BF1 Flow | |
| 40074 | Number | EB100-FR1 anode status | |
| 40079 | Number | EB100-BE1 current phase 3 | |
| 40067 | Number | EM1-BT52 boiler temperature | |
| 40070 | Number | BT25 external supply temp | |
| 40071 | Number | BT25 external supply temp | |
| 40054 | Number | EB100-FD1 temperature limiter | |
| 47212 | Number | Max int addition power | |
| 47214 | Number | Fuse | |
| 47209 | Number | DM between addition steps | |
| 47208 | Number | DM start addition | |
| 40033 | Number | BT50 room temp S1 | |
| 40032 | Number | EB21-BT50 room temp S2 | |
| 47210 | Number | DM start addition with shunt | |
| 40046 | Number | EQ1-BT65 PCS4 return temp | |
| 40045 | Number | EQ1-BT64 PCS4 supply temp | |
| 47207 | Number | DM start cooling | |
| 40044 | Number | EP8-BT54 solar load temp | |
| 47206 | Number | DM start heating | |
| 40043 | Number | EP8-BT53 solar panel temp | |
| 40042 | Number | CL11-BT51 pool 1 temp | |
| 40022 | Number | EB100-EP14-BT17 suction | |
| 40016 | Number | EB100-EP14-BT11 brine out temp | |
| 40017 | Number | EB100-EP14-BT12 cond out | |
| 40018 | Number | EB100-EP14-BT14 hot gas temp | |
| 40019 | Number | EB100-EP14-BT15 liquid line | |
| 40028 | Number | AZ1-BT26 temp collector in FLM 1 | |
| 40029 | Number | AZ1-BT27 temp collector out FLM 1 | |
| 40030 | Number | EB23-BT50 room temp S4 | |
| 40031 | Number | EB22-BT50 room temp S3 | |
| 40025 | Number | EB100-BT20 exhaust air temp | |
| 40026 | Number | EB100-BT21 vented air temp | |
| 40005 | Number | EB23-BT2 supply temp S4 | |
| 40004 | Number | BT1 outdoor temp | |
| 40007 | Number | EB21-BT2 supply temp S2 | |
| 40006 | Number | EB22-BT2 supply temp S3 | |
| 40013 | Number | BT6 hot water top | |
| 40012 | Number | EB100-EP14-BT3 return temp | |
| 40015 | Number | EB100-EP14-BT10 brine in temp | |
| 40014 | Number | BT6 hot water load | |
| 40008 | Number | BT2 supply temp S1 | |
| 43001 | Number | Software version | |
| 43006 | Number | Calculated supply temp S4 | |
| 43007 | Number | Calculated supply temp S3 | |
| 43005 | Number | Degree minutes | |
| 47136 | Number | Period pool | |
| 47139 | Number | Operational mode brine medium pump | |
| 47138 | Number | Operational mode heat medium pump | |
| 47131 | Number | Language | |
| 47134 | Number | Period hot water | |
| 47135 | Number | Period heat | |
| 47133 | Number | Period pool 2 | |
| 48064 | Number | FLM 4 speed 3 | |
| 48065 | Number | FLM 4 speed 2 | |
| 48066 | Number | FLM 4 speed 1 | |
| 48067 | Number | FLM 4 speed normal | |
| 48068 | Number | FLM 4 accessory | |
| 48069 | Number | FLM 3 accessory | |
| 48070 | Number | FLM 2 accessory | |
| 48071 | Number | FLM 1 accessory | |
| 43230 | Number | Accumulated energy | |
| 48073 | Number | FLM cooling | |
| 48074 | Number | Set point for BT74 | |
| 48088 | Number | Pool 1 accesory | |
| 48090 | Number | Pool 1 start temp | |
| 48093 | Number | Pool 2 activated | |
| 48092 | Number | Pool 1 stop temp | |
| 48094 | Number | Pool 1 activated | |
| 48537 | Number | Night cooling | |
| 48539 | Number | Night cooling min diff | |
| 43239 | Number | Total hot water operation time add | |
| 47570 | Number | Operational mode | |
| 47538 | Number | Start room temp nigh cooling | |
| 48055 | Number | FLM 2 speed 2 | |
| 48054 | Number | FLM 2 speed 3 | |
| 48053 | Number | FLM 2 speed 4 | |
| 48063 | Number | FLM 4 speed 4 | |
| 48062 | Number | FLM 3 speed normal | |
| 48061 | Number | FLM 3 speed 1 | |
| 48060 | Number | FLM 3 speed 2 | |
| 48059 | Number | FLM 3 speed 3 | |
| 48058 | Number | FLM 3 speed 4 | |
| 48057 | Number | FLM 2 speed normal | |
| 48056 | Number | FLM 2 speed 1 | |
| 47005 | Number | Heat curve S3 | |
| 43103 | Number | HPAC state | |
| 47004 | Number | Heat curve S4 | |
| 47007 | Number | Heat curve S1 | |
| 47006 | Number | Heat curve S2 | |
| 43091 | Number | Internal electrical addition state | |
| 43086 | Number | Prio | |
| 43084 | Number | Internal electrical addition power | |
| 43081 | Number | Total operation time addition | |
| 47036 | Number | External adjust with room sensor S1 | |
| 47035 | Number | External adjust with room sensor S2 | |
| 47034 | Number | External adjust with room sensor S3 | |
| 47033 | Number | External adjust with room sensor S4 | |
| 47032 | Number | External adjustment S1 | |
| 47031 | Number | External adjustment S2 | |
| 47030 | Number | External adjustment S3 | |
| 47029 | Number | External adjustment S4 | |
| 47028 | Number | Point offset | |
| 47027 | Number | Point offset outdoor temp | |
| 47026 | Number | Own curve P1 | |
| 47025 | Number | Own curve P2 | |
| 47024 | Number | Own curve P3 | |
| 47022 | Number | Own curve P5 | |
| 47023 | Number | Own curve P4 | |
| 47020 | Number | Own curve P7 | |
| 47021 | Number | Own curve P6 | |
| 47018 | Number | Max supply system 2 | |
| 47019 | Number | Max supply system 1 | |
| 47016 | Number | Max supply system 4 | |
| 47017 | Number | Max supply system 3 | |
| 47014 | Number | Min supply system 2 | |
| 47015 | Number | Min supply system 1 | |
| 47012 | Number | Min supply system 4 | |
| 47013 | Number | Min supply system 3 | |
| 47010 | Number | Offset S2 | |
| 47011 | Number | Offset S1 | |
| 47008 | Number | Offset S4 | |
| 47009 | Number | Offset S3 | |
| 47402 | Number | Room sensor factor S1 | |
| 47401 | Number | Room sensor factor S2 | |
| 47400 | Number | Room sensor factor S3 | |
| 47395 | Number | Room sensor setpoint S4 | |
| 47394 | Number | Use room sensor S1 | |
| 47393 | Number | Use room sensor S2 | |
| 47392 | Number | Use room sensor S3 | |
| 43024 | Number | Status cooling | |
| 47399 | Number | Room sensor factor S4 | |
| 47398 | Number | Room sensor setpoint S1 | |
| 47397 | Number | Room sensor setpoint S2 | |
| 47396 | Number | Room sensor setpoint S3 | |
| 47418 | Number | Speed brine pump | |
| 47048 | Number | Stop temperature hot water normal | |
| 47049 | Number | Stop temperature hot water economy | |
| 47416 | Number | Speed circ pump economy | |
| 47050 | Number | Periodic hot water | |
| 47417 | Number | Speed circ pump cooling | |
| 47051 | Number | Periodic hot water interval | |
| 43010 | Number | Calculated cooling supply temp | |
| 47041 | Number | Hot water mode | |
| 43008 | Number | Calculated supply temp S2 | |
| 43009 | Number | Calculated supply temp S1 | |
| 47043 | Number | Start temperature hot water luxury | |
| 47414 | Number | Speed circ pump heat | |
| 47044 | Number | Start temperature hot water normal | |
| 47415 | Number | Speed circ pump pool | |
| 47045 | Number | Start temperature hot water economy | |
| 47046 | Number | Stop temperature periodic hot water | |
| 47413 | Number | Speed circ pump hot water | |
| 43013 | Number | Freeze protection status | |
| 47047 | Number | Stop temperature hot water luxury | |
| 47384 | Number | Date format | |
| 47385 | Number | Time format | |
| 47387 | Number | Hot water production | |
| 47388 | Number | Alarm lower room temp | |
| 47389 | Number | Alarm lower HW temp | |
| 47391 | Number | Use room sensor S4 | |
| 47378 | Number | Max diff comp | |
| 47379 | Number | Max diff add | |
| 47380 | Number | Low brine out autoreset | |
| 47381 | Number | Low brine out temp | |
| 47382 | Number | High brine in | |
| 47383 | Number | High brine in temp |
Number DegreeMinutes { nibeheatpump="43005" }
Number BT1_OutdoorTemp { nibeheatpump="40004" }
Number BT2_SupplyTemp { nibeheatpump="40008" }
ℹ Please find all documentation for openHAB 2 under http://docs.openhab.org.
The wiki pages here contain (outdated) documentation for the older openHAB 1.x version. Please be aware that a lot of core details changed with openHAB 2.0 and this wiki as well as all tutorials found for openHAB 1.x might be misleading. Check http://docs.openhab.org for more details and consult the community forum for all remaining questions.
- Classic UI
- iOS Client
- Android Client
- Windows Phone Client
- GreenT UI
- CometVisu
- Kodi
- Chrome Extension
- Alfred Workflow
- Cosm Persistence
- db4o Persistence
- Amazon DynamoDB Persistence
- Exec Persistence
- Google Calendar Presence Simulator
- InfluxDB Persistence
- JDBC Persistence
- JPA Persistence
- Logging Persistence
- mapdb Persistence
- MongoDB Persistence
- MQTT Persistence
- my.openHAB Persistence
- MySQL Persistence
- rrd4j Persistence
- Sen.Se Persistence
- SiteWhere Persistence
- AKM868 Binding
- AlarmDecoder Binding
- Anel Binding
- Arduino SmartHome Souliss Binding
- Asterisk Binding
- Astro Binding
- Autelis Pool Control Binding
- BenQ Projector Binding
- Bluetooth Binding
- Bticino Binding
- CalDAV Binding
- Chamberlain MyQ Binding
- Comfo Air Binding
- Config Admin Binding
- CUL Transport
- CUL Intertechno Binding
- CUPS Binding
- DAIKIN Binding
- Davis Binding
- DD-WRT Binding
- Denon Binding
- digitalSTROM Binding
- DIY on XBee Binding
- DMX512 Binding
- DSC Alarm Binding
- DSMR Binding
- eBUS Binding
- Ecobee Binding
- EDS OWSever Binding
- eKey Binding
- Energenie Binding
- EnOcean Binding
- Enphase Energy Binding
- Epson Projector Binding
- Exec Binding
- Expire Binding
- Fatek PLC Binding
- Freebox Binding
- Freeswitch Binding
- Frontier Silicon Radio Binding
- Fritz AHA Binding
- Fritz!Box Binding
- FritzBox-TR064-Binding
- FS20 Binding
- Garadget Binding
- Global Caché IR Binding
- GPIO Binding
- HAI/Leviton OmniLink Binding
- HDAnywhere Binding
- Heatmiser Binding
- Homematic / Homegear Binding
- Horizon Mediabox Binding
- HTTP Binding
- IEC 62056-21 Binding
- IHC / ELKO Binding
- ImperiHome Binding
- Insteon Hub Binding
- Insteon PLM Binding
- IPX800 Binding
- IRtrans Binding
- jointSPACE-Binding
- KM200 Binding
- KNX Binding
- Koubachi Binding
- LCN Binding
- LightwaveRF Binding
- Leviton/HAI Omnilink Binding
- Lg TV Binding
- Logitech Harmony Hub
- MailControl Binding
- MAX!Cube-Binding
- MAX! CUL Binding
- MCP23017 I/O Expander Binding
- MCP3424 ADC Binding
- MiLight Binding
- MiOS Binding
- Mochad X10 Binding
- Modbus Binding
- MPD Binding
- MQTT Binding
- MQTTitude binding
- MystromEcoPower Binding
- Neohub Binding
- Nest Binding
- Netatmo Binding
- Network Health Binding
- Network UPS Tools Binding
- Nibe Heatpump Binding
- Nikobus Binding
- Novelan/Luxtronic Heatpump Binding
- NTP Binding
- One-Wire Binding
- Onkyo AV Receiver Binding
- Open Energy Monitor Binding
- OpenPaths presence detection binding
- OpenSprinkler Binding
- OSGi Configuration Admin Binding
- Panasonic TV Binding
- panStamp Binding
- Philips Hue Binding
- Picnet Binding
- Piface Binding
- PiXtend Binding
- pilight Binding
- Pioneer-AVR-Binding
- Plex Binding
- Plugwise Binding
- PLCBus Binding
- PowerDog Local API Binding
- Powermax alarm Binding
- Primare Binding
- Pulseaudio Binding
- Raspberry Pi RC Switch Binding
- RFXCOM Binding
- RWE Smarthome Binding
- Sager WeatherCaster Binding
- Samsung AC Binding
- Samsung TV Binding
- Serial Binding
- Sallegra Binding
- Satel Alarm Binding
- Siemens Logo! Binding
- SimpleBinary Binding
- Sinthesi Sapp Binding
- Smarthomatic Binding
- Snmp Binding
- Somfy URTSI II Binding
- Sonance Binding
- Sonos Binding
- Souliss Binding
- Squeezebox Binding
- Stiebel Eltron Heatpump
- Swegon ventilation Binding
- System Info Binding
- TA CMI Binding
- TCP/UDP Binding
- Tellstick Binding
- TinkerForge Binding
- Tivo Binding
- UCProjects.eu Relay Board Binding
- UPB Binding
- VDR Binding
- Velleman-K8055-Binding
- Wago Binding
- Wake-on-LAN Binding
- Waterkotte EcoTouch Heatpump Binding
- Weather Binding
- Wemo Binding
- Withings Binding
- XBMC Binding
- xPL Binding
- Yamahareceiver Binding
- Zibase Binding
- Z-Wave Binding
- Asterisk
- DoorBird
- FIND
- Foscam IP Cameras
- LG Hombot
- Worx Landroid
- Heatmiser PRT Thermostat
- Google Calendar
- Linux Media Players
- Osram Lightify
- Rainforest EAGLE Energy Access Gateway
- Roku Integration
- ROS Robot Operating System
- Slack
- Telldus Tellstick
- Zoneminder
- Wink Hub (rooted)
- Wink Monitoring
- openHAB Cloud Connector
- Google Calendar Scheduler
- Transformations
- XSLT
- JSON
- REST-API
- Security
- Service Discovery
- Voice Control
- BritishGasHive-Using-Ruby
- Dropbox Bundle
A good source of inspiration and tips from users gathered over the years. Be aware that things may have changed since they were written and some examples might not work correctly.
Please update the wiki if you do come across any out of date information.
- Rollershutter Bindings
- Squeezebox
- WAC Binding
- WebSolarLog
- Alarm Clock
- Convert Fahrenheit to Celsius
- The mother of all lighting rules
- Reusable Rules via Functions
- Combining different Items
- Items, Rules and more Examples of a SmartHome
- Google Map
- Controlling openHAB with Android
- Usecase examples
- B-Control Manager
- Spell checking for foreign languages
- Flic via Tasker
- Chromecast via castnow
- Speedtest.net integration