Skip to content
This repository has been archived by the owner on May 17, 2021. It is now read-only.

FHT Binding

Patrick Ruckstuhl edited this page Apr 19, 2016 · 1 revision

Installation and Configuration

See CUL Transport for general configuration options (such as serial device parameters).

Item configuration

{cul="TR3D4900"} is binding to receive the valve position in percent. It can be bound to a number item
{cul="TR952E90"} is a binding to receive the window state of a FHT window contact. Note that these two bindings can only be read only. None of these devices does receive commands
{cul="TR3D49"} This would be a binding to receive reports of a FHT80b. Currently only the measured temperature is received
{cul="TW3D49"} This binding enables you to send commands to a FHT80b. Currently this will be mostly the desired temperature. But you need also a writeable binding to update the time on your FHT80b.

Installation


User Interfaces


Community

(link to openHAB forum)

Development



Misc


Samples

A good source of inspiration and tips from users gathered over the years. Be aware that things may have changed since they were written and some examples might not work correctly.

Please update the wiki if you do come across any out of date information.

Use case examples

Collections of Rules on a single page

Single Rules

Scripts


Release Notes

Clone this wiki locally