Allow injection of TLS config for OpenShift routes #396

aRestless · 2020-10-06T16:23:53Z

Purpose of this PR: On OpenShift it is common to let the cluster-wide router do the TLS termination, either through a wildcard certificate for its standard domain, or a per-route certificate. See https://docs.openshift.com/container-platform/4.5/networking/routes/secured-routes.html. These termination policies "edge" and "reencrypt" support additional configuration parameters on the route, specifically for the per-route certificate. The current chart version in master does not support to set these values or to even change the termination policy.

Solution: Add a tls block to server.route that is injected directly into the route config (.spec.tls) and set the default in values.yml to passthrough termination to not change default behavior.

Alternative: Include and document any values that are supported by .spec.tls in server.route.tls instead of injecting the whole YAML block.

Outlook: The default standalone config in the chart disables TLS at the vault listener, which is somewhat okay for in-cluster traffic, but a more production-ready default for OpenShift routes would be to assume termination policy "edge" instead of "passthrough", and to not set the route host. Not setting the route host generates a default hostname based on the OpenShift project name. Typical OpenShift clusters have a wildcard certificate set up for these default hostnames.

This would be a breaking change since it would change the chart's default behavior, which is why I left this part out of the PR for now.

hashicorp-cla · 2020-10-06T16:23:58Z

All committers have signed the CLA.

leofin · 2021-08-30T19:44:38Z

I open a PR very close to this one a few days ago. I liked more your approach. Please @HashiCoop review it?

tvoran

Apologies for the delay! I agree this seems like a good approach for the tls block; would you mind adding a couple tests (one for the default and one for a set value) to test/unit/server-route.bats?

Tested with: make test-unit 2>&1 | grep 'server/route' ok 203 server/route: OpenShift - disabled by default ok 204 server/route: OpenShift -disable by injector.externalVaultAddr ok 205 server/route: OpenShift - checking host entry gets added and path is / ok 206 server/route: OpenShift - vault backend should be added when I specify a path ok 207 server/route: OpenShift - labels gets added to object ok 208 server/route: OpenShift - annotations added to object - string ok 209 server/route: OpenShift - annotations added to object - yaml ok 210 server/route: OpenShift - route points to main service by default ok 211 server/route: OpenShift - route points to active service by when HA ok 212 server/route: OpenShift - route termination mode set to default passthrough ok 213 server/route: OpenShift - route termination mode set to edge ok 214 server/route: OpenShift - route custom tls entry

mbaldessari · 2022-01-10T09:59:40Z

I added some tests here in mbaldessari@4be1572 @aRestless could you merge something along those lines in your PR here ? (If not we can add them on top after merging this one, I guess)

mbaldessari · 2022-01-17T08:08:17Z

Apologies for the delay! I agree this seems like a good approach for the tls block; would you mind adding a couple tests (one for the default and one for a set value) to test/unit/server-route.bats?

@tvoran Could we maybe merge this one as is and I'll make a PR out of mbaldessari@4be1572 to add tests on top or should I propose a new PR squashing this + tests? (I suspect I cannot update this existing PR)

tvoran · 2022-01-19T02:23:27Z

Hi @mbaldessari, if you don't mind, please open a new PR from your branch (mbaldessari:tests-on-top-of-396), and we can continue reviewing it there. No need to squash it unless you run into trouble resolving conflicts or something.

mbaldessari · 2022-01-19T11:20:25Z

Hi @tvoran, thanks! I pushed #686

* Add some tests on top of #396 * convert server-route.yaml to unix newlines * changelog Co-authored-by: André Becker <[email protected]> Co-authored-by: Theron Voran <[email protected]>

tvoran · 2022-01-20T06:38:33Z

Superseded by #686

* Add some tests on top of hashicorp#396 * convert server-route.yaml to unix newlines * changelog Co-authored-by: André Becker <[email protected]> Co-authored-by: Theron Voran <[email protected]>

* add staticSecretRenderInterval to injector (hashicorp#621) * make staticSecretRenderInterval default to empty string * update values schema to add staticSecretRenderInterval * add test for default value * adding changelog entry Co-authored-by: Theron Voran <[email protected]> * Update jira action (hashicorp#644) * No longer check for Vault team membership * Tweak jira states and search parameters * remove support for the leader-elector container (hashicorp#649) * vault-helm 0.18.0 release (hashicorp#650) * Run CI tests in github workflows (hashicorp#657) Ports the bats unit, chart-verifier, and bats acceptance tests to use github workflows and actions. The acceptance tests run using kind, and run for multiple k8s versions, on pushes to the main branch. Adds a SKIP_CSI env check in the CSI acceptance test, set in the workflow if K8s version is less than 1.16. Adds kubeAdmConfigPatches to the kind config to allow testing the CSI provider on K8s versions prior to 1.21. Updates the Secrets Store CSI driver to 1.0.0 in tests. Makes the HA Vault tests more robust by waiting for all consul client pods to be Ready, and waits with a timeout for Vault to start responding as sealed (since the tests on GitHub runners were often failing at that point). Co-authored-by: Tom Proctor <[email protected]> * Configurable PodDisruptionBudget for Injector (hashicorp#653) * Fix spelling error in server disruptionbudget test (hashicorp#654) * Make terminationGracePeriodSeconds configurable (hashicorp#659) Make terminationGracePeriodSeconds configurable for server pod * injector: ability to set deployment update strategy (continued) (hashicorp#661) Co-authored-by: Jason Hancock <[email protected]> * csi: ability to set priorityClassName for csi daemonset pods (hashicorp#670) * Fixed a small typo (hashicorp#672) * Disable unit and acceptance tests in CircleCI (hashicorp#675) * update CONTRIBUTING.md (hashicorp#677) Link to the discuss forum instead of the old google group and irc channel. Add info about the CLA. * add namespace support for openshift route (hashicorp#679) * Add volumes and env vars to helm hook test pod (hashicorp#673) * Fix test typo * Add basic server-test Pod tests - This covers all existing functionality that matches what's present in server-statefulset.bats * Fix server-test helm hook Pod rendering - Properly adhere to the global.enabled flag and the presence of the injector.externalVaultAddr setting, the same way that the servers StatefulSet behaves * Add volumes and env vars to helm hook test pod - Uses the same extraEnvironmentVars, volumes and volumeMounts set on the server statefulset to configure the Vault server test pod used by the helm test hook - This is necessary in situations where TLS is configured, but the certificates are not affiliated with the k8s CA / part of k8s PKI - Fixes hashicorpGH-665 * allow injection of TLS config for OpenShift routes (hashicorp#686) * Add some tests on top of hashicorp#396 * convert server-route.yaml to unix newlines * changelog Co-authored-by: André Becker <[email protected]> Co-authored-by: Theron Voran <[email protected]> * Release 0.19.0 (hashicorp#687) * Explain this fork in the README * Adding support for LoadBalancerIP field in ServiceSpec * DATAGO-13861: Adding support for logrotate * DATAGO-13861: Adding audit log rotation and shipment to datdog * Fixing minor typos and removing extra lines * Update to 0.4.0 * Explain this fork in the README * Adding support for LoadBalancerIP field in ServiceSpec * DATAGO-13861: Adding support for logrotate * DATAGO-13861: Adding audit log rotation and shipment to datdog * Fixing minor typos and removing extra lines * feat(DATAGO-27002): Upgrade vault to version 1.7.9 (#12) * Add objectSelector to webhookconfiguration (hashicorp#456) * changelog++ * Add CSI secrets store provider (hashicorp#461) * updating acceptance tests to k8s 1.17 on gke (hashicorp#473) * changelog++ * Target vault-csi-provider release 0.1.0 (hashicorp#475) * Update to 0.10.0 (hashicorp#477) * Update to v0.10.0 * Fix typo * Add csi link in changelog * Add volumes and mounts support for CSI (hashicorp#479) * Remove extraVolumes from CSI, add volumes and mounts * Add better example * changelog++ * Remove extra word in readme (hashicorp#482) * fix csi helm deployment (hashicorp#486) * fix serviceaccount and clusterrole name reference (full name) * add server.enabled option, align with documentation * add unit tests * update server.enabled behaviour to explicit true and update tests * changelog++ * add hostNetwork value to injector deployment (hashicorp#471) * add hostNetwork value to injector deployment * adding unit tests * changelog++ * feat(ingress): Extra paths to prepend to the ingress host configuration for annotation based services (hashicorp#460) Refs hashicorp#361 * changelog++ * Add logLevel and logFormat values for Vault (hashicorp#488) * Add logLevel and logFormat values for Vault * Add configurable tests * Update order of log levels * Update values.yaml * Update per review * Update test/unit/server-statefulset.bats Co-authored-by: Tom Proctor <[email protected]> * Update test/unit/server-statefulset.bats Co-authored-by: Tom Proctor <[email protected]> Co-authored-by: Tom Proctor <[email protected]> * changelog++ * Custom value of agent port (hashicorp#489) * configure the agent port * add unit test * remove default * remove default * Update values.yaml Co-authored-by: Jason O'Donnell <[email protected]> Co-authored-by: Jason O'Donnell <[email protected]> * changelog++ * Add injector agent default overrides (hashicorp#493) * Add injector agent default overrides * Update test/unit/injector-deployment.bats Co-authored-by: Theron Voran <[email protected]> * Update test/unit/injector-deployment.bats Co-authored-by: Theron Voran <[email protected]> * Update test/unit/injector-deployment.bats Co-authored-by: Theron Voran <[email protected]> Co-authored-by: Theron Voran <[email protected]> * changelog++ * [injector] Add port name in injector service (hashicorp#495) * [injector] Add port name in injector service * [injector] Hardcore port to https * changelog++ * Fix injector unit test failing (hashicorp#496) * Fix injector unit test failing * Add null check * Add default if unset for CI * Remove redundant logic (hashicorp#434) * Update to v0.11.0 (hashicorp#497) * Add container based tests documentation (hashicorp#492) * update documentation with running unit tests using container * promote bats version to 1.3.0 * Update CONTRIBUTING.md Co-authored-by: Jason O'Donnell <[email protected]> * Update CONTRIBUTING.md Co-authored-by: Jason O'Donnell <[email protected]> Co-authored-by: Jason O'Donnell <[email protected]> * Set kubeVersion and added chart-verifier tests (hashicorp#510) Set min kubeVersion in Chart.yaml to 1.14. Added a chart-verifier bats test, and configured to run it in CI. Some verification tests that haven't been addressed yet are skipped. * changelog++ * match kubeVersion on semver pre-releases (hashicorp#512) Since clouds like GKE set their kubeVersion as a pre-release (e.g. v1.17.17-gke.6700) * Add ImagePullSecrets to CSI daemonset (hashicorp#519) * changelog++ * changelog++ * fix CONTRIBUTING.md (hashicorp#501) * updating to use new dedicated context and token (hashicorp#515) * added values json schema (hashicorp#513) Generated the schema using the helm schema-gen plugin, and added extra data types to fields that allow it, such as annotations, tolerations, enabled, etc. Enabled the "contains-value-schema" chart-verifier test. Co-authored-by: Jason O'Donnell <[email protected]> * changelog++ * [Issue-520] tolerations for csi-daemonset (hashicorp#521) Co-authored-by: Theron Voran <[email protected]> * changelog++ * Add extraArgs value for CSI (hashicorp#526) * changelog++ * add schema unit tests (hashicorp#530) * Add UI targetPort option (hashicorp#437) Use custom `targetPort` for UI service. See the usecase in hashicorp#385 (comment) * changelog++ * Update to v0.12.0 (hashicorp#532) * Update to v0.12.0 * Update values.schema.json * Fix schema types * revert image repo * Adding helm test for vault server (hashicorp#531) Also adds acceptance test for 'helm test' and updates the chart-verifier version. * changelog++ * fix ui.serviceNodePort schema (hashicorp#537) UI service nodePort defaults to null, but is set as an integer * changelog++ * change maxUnavailable to integer (hashicorp#535) change maxUnavailable from `null` to `integer` to enable upgrade from 0.11.0 to 0.12.0 when using the specific variable. * Also allow null value Co-authored-by: Theron Voran <[email protected]> * add test for server.ha.disruptionBudget.maxUnavailable Co-authored-by: Theron Voran <[email protected]> * changelog++ * use vault-helm-test:0.2.0 (hashicorp#543) * Added webhook-certs volume mount to sidecar injector (hashicorp#545) * Removed webhook-certs volume mount from leader-elector container * Added test: injector deployment manual TLS adds volume mount * changelog++ * Adding server.enterpriseLicense (hashicorp#547) Sets up a vault-enterprise license for autoloading on vault startup. Mounts an existing secret to /vault/license and sets VAULT_LICENSE_PATH appropriately. * changelog++ * Add openshift overrides (hashicorp#549) Adds default overrides for OpenShift (values.openshift.yaml) and uses them in the chart-verifier tests. * changelog++ * Update to v0.13.0 (hashicorp#554) * Explain this fork in the README * Adding support for LoadBalancerIP field in ServiceSpec * DATAGO-13861: Adding support for logrotate * DATAGO-13861: Adding audit log rotation and shipment to datdog * Fixing minor typos and removing extra lines * DATAGO-13861: Adding support for logrotate * DATAGO-13861: Adding audit log rotation and shipment to datdog * Fixing minor typos and removing extra lines * feat(DATAGO-27002): Upgrade to 1.7.9 * chore(DATAGO-27002): Fix doc issue Co-authored-by: guru1306 <[email protected]> Co-authored-by: Jason O'Donnell <[email protected]> Co-authored-by: Tom Proctor <[email protected]> Co-authored-by: Theron Voran <[email protected]> Co-authored-by: Paul <[email protected]> Co-authored-by: Arie Lev <[email protected]> Co-authored-by: Paul Witt <[email protected]> Co-authored-by: Sam Marshall <[email protected]> Co-authored-by: Hamza ZOUHAIR <[email protected]> Co-authored-by: Javier Criado Marcos <[email protected]> Co-authored-by: mehmetsalgar <[email protected]> Co-authored-by: Sarah Thompson <[email protected]> Co-authored-by: Iñigo Horcajo <[email protected]> Co-authored-by: Rule88 <[email protected]> Co-authored-by: Ricardo Gândara Pinto <[email protected]> Co-authored-by: Julian Setiawan <[email protected]> Co-authored-by: marcboudreau <[email protected]> Co-authored-by: Hadie Laham <[email protected]> * fix: deploy_local.sh error with file * minor changes * Adding support for LoadBalancerIP field in ServiceSpec * DATAGO-13861: Adding support for logrotate * DATAGO-13861: Adding audit log rotation and shipment to datdog * Fixing minor typos and removing extra lines * DATAGO-13861: Adding support for logrotate * DATAGO-13861: Adding audit log rotation and shipment to datdog * Fixing minor typos and removing extra lines * feat(DATAGO-27002): Upgrade vault to version 1.7.9 (#12) * Add objectSelector to webhookconfiguration (hashicorp#456) * changelog++ * Add CSI secrets store provider (hashicorp#461) * updating acceptance tests to k8s 1.17 on gke (hashicorp#473) * changelog++ * Target vault-csi-provider release 0.1.0 (hashicorp#475) * Update to 0.10.0 (hashicorp#477) * Update to v0.10.0 * Fix typo * Add csi link in changelog * Add volumes and mounts support for CSI (hashicorp#479) * Remove extraVolumes from CSI, add volumes and mounts * Add better example * changelog++ * Remove extra word in readme (hashicorp#482) * fix csi helm deployment (hashicorp#486) * fix serviceaccount and clusterrole name reference (full name) * add server.enabled option, align with documentation * add unit tests * update server.enabled behaviour to explicit true and update tests * changelog++ * add hostNetwork value to injector deployment (hashicorp#471) * add hostNetwork value to injector deployment * adding unit tests * changelog++ * feat(ingress): Extra paths to prepend to the ingress host configuration for annotation based services (hashicorp#460) Refs hashicorp#361 * changelog++ * Add logLevel and logFormat values for Vault (hashicorp#488) * Add logLevel and logFormat values for Vault * Add configurable tests * Update order of log levels * Update values.yaml * Update per review * Update test/unit/server-statefulset.bats Co-authored-by: Tom Proctor <[email protected]> * Update test/unit/server-statefulset.bats Co-authored-by: Tom Proctor <[email protected]> Co-authored-by: Tom Proctor <[email protected]> * changelog++ * Custom value of agent port (hashicorp#489) * configure the agent port * add unit test * remove default * remove default * Update values.yaml Co-authored-by: Jason O'Donnell <[email protected]> Co-authored-by: Jason O'Donnell <[email protected]> * changelog++ * Add injector agent default overrides (hashicorp#493) * Add injector agent default overrides * Update test/unit/injector-deployment.bats Co-authored-by: Theron Voran <[email protected]> * Update test/unit/injector-deployment.bats Co-authored-by: Theron Voran <[email protected]> * Update test/unit/injector-deployment.bats Co-authored-by: Theron Voran <[email protected]> Co-authored-by: Theron Voran <[email protected]> * changelog++ * [injector] Add port name in injector service (hashicorp#495) * [injector] Add port name in injector service * [injector] Hardcore port to https * changelog++ * Fix injector unit test failing (hashicorp#496) * Fix injector unit test failing * Add null check * Add default if unset for CI * Remove redundant logic (hashicorp#434) * Update to v0.11.0 (hashicorp#497) * Add container based tests documentation (hashicorp#492) * update documentation with running unit tests using container * promote bats version to 1.3.0 * Update CONTRIBUTING.md Co-authored-by: Jason O'Donnell <[email protected]> * Update CONTRIBUTING.md Co-authored-by: Jason O'Donnell <[email protected]> Co-authored-by: Jason O'Donnell <[email protected]> * Set kubeVersion and added chart-verifier tests (hashicorp#510) Set min kubeVersion in Chart.yaml to 1.14. Added a chart-verifier bats test, and configured to run it in CI. Some verification tests that haven't been addressed yet are skipped. * changelog++ * match kubeVersion on semver pre-releases (hashicorp#512) Since clouds like GKE set their kubeVersion as a pre-release (e.g. v1.17.17-gke.6700) * Add ImagePullSecrets to CSI daemonset (hashicorp#519) * changelog++ * changelog++ * fix CONTRIBUTING.md (hashicorp#501) * updating to use new dedicated context and token (hashicorp#515) * added values json schema (hashicorp#513) Generated the schema using the helm schema-gen plugin, and added extra data types to fields that allow it, such as annotations, tolerations, enabled, etc. Enabled the "contains-value-schema" chart-verifier test. Co-authored-by: Jason O'Donnell <[email protected]> * changelog++ * [Issue-520] tolerations for csi-daemonset (hashicorp#521) Co-authored-by: Theron Voran <[email protected]> * changelog++ * Add extraArgs value for CSI (hashicorp#526) * changelog++ * add schema unit tests (hashicorp#530) * Add UI targetPort option (hashicorp#437) Use custom `targetPort` for UI service. See the usecase in hashicorp#385 (comment) * changelog++ * Update to v0.12.0 (hashicorp#532) * Update to v0.12.0 * Update values.schema.json * Fix schema types * revert image repo * Adding helm test for vault server (hashicorp#531) Also adds acceptance test for 'helm test' and updates the chart-verifier version. * changelog++ * fix ui.serviceNodePort schema (hashicorp#537) UI service nodePort defaults to null, but is set as an integer * changelog++ * change maxUnavailable to integer (hashicorp#535) change maxUnavailable from `null` to `integer` to enable upgrade from 0.11.0 to 0.12.0 when using the specific variable. * Also allow null value Co-authored-by: Theron Voran <[email protected]> * add test for server.ha.disruptionBudget.maxUnavailable Co-authored-by: Theron Voran <[email protected]> * changelog++ * use vault-helm-test:0.2.0 (hashicorp#543) * Added webhook-certs volume mount to sidecar injector (hashicorp#545) * Removed webhook-certs volume mount from leader-elector container * Added test: injector deployment manual TLS adds volume mount * changelog++ * Adding server.enterpriseLicense (hashicorp#547) Sets up a vault-enterprise license for autoloading on vault startup. Mounts an existing secret to /vault/license and sets VAULT_LICENSE_PATH appropriately. * changelog++ * Add openshift overrides (hashicorp#549) Adds default overrides for OpenShift (values.openshift.yaml) and uses them in the chart-verifier tests. * changelog++ * Update to v0.13.0 (hashicorp#554) * Explain this fork in the README * Adding support for LoadBalancerIP field in ServiceSpec * DATAGO-13861: Adding support for logrotate * DATAGO-13861: Adding audit log rotation and shipment to datdog * Fixing minor typos and removing extra lines * DATAGO-13861: Adding support for logrotate * DATAGO-13861: Adding audit log rotation and shipment to datdog * Fixing minor typos and removing extra lines * feat(DATAGO-27002): Upgrade to 1.7.9 * chore(DATAGO-27002): Fix doc issue Co-authored-by: guru1306 <[email protected]> Co-authored-by: Jason O'Donnell <[email protected]> Co-authored-by: Tom Proctor <[email protected]> Co-authored-by: Theron Voran <[email protected]> Co-authored-by: Paul <[email protected]> Co-authored-by: Arie Lev <[email protected]> Co-authored-by: Paul Witt <[email protected]> Co-authored-by: Sam Marshall <[email protected]> Co-authored-by: Hamza ZOUHAIR <[email protected]> Co-authored-by: Javier Criado Marcos <[email protected]> Co-authored-by: mehmetsalgar <[email protected]> Co-authored-by: Sarah Thompson <[email protected]> Co-authored-by: Iñigo Horcajo <[email protected]> Co-authored-by: Rule88 <[email protected]> Co-authored-by: Ricardo Gândara Pinto <[email protected]> Co-authored-by: Julian Setiawan <[email protected]> Co-authored-by: marcboudreau <[email protected]> Co-authored-by: Hadie Laham <[email protected]> * changed value to use tag 1.9.6 Co-authored-by: Kaito Ii <[email protected]> Co-authored-by: Theron Voran <[email protected]> Co-authored-by: Tom Proctor <[email protected]> Co-authored-by: Eric Miller <[email protected]> Co-authored-by: Takumi Sue <[email protected]> Co-authored-by: Jason Hancock <[email protected]> Co-authored-by: Vadim Grek <[email protected]> Co-authored-by: nikstur <[email protected]> Co-authored-by: Jacob Mammoliti <[email protected]> Co-authored-by: Ethan J. Brown <[email protected]> Co-authored-by: Michele Baldessari <[email protected]> Co-authored-by: André Becker <[email protected]> Co-authored-by: Julian Setiawan <[email protected]> Co-authored-by: marcboudreau <[email protected]> Co-authored-by: Hadie Laham <[email protected]> Co-authored-by: Jason O'Donnell <[email protected]> Co-authored-by: Subhrajit Nag <[email protected]> Co-authored-by: guru1306 <[email protected]> Co-authored-by: Paul <[email protected]> Co-authored-by: Arie Lev <[email protected]> Co-authored-by: Paul Witt <[email protected]> Co-authored-by: Sam Marshall <[email protected]> Co-authored-by: Hamza ZOUHAIR <[email protected]> Co-authored-by: Javier Criado Marcos <[email protected]> Co-authored-by: mehmetsalgar <[email protected]> Co-authored-by: Sarah Thompson <[email protected]> Co-authored-by: Iñigo Horcajo <[email protected]> Co-authored-by: Rule88 <[email protected]> Co-authored-by: Ricardo Gândara Pinto <[email protected]> Co-authored-by: adhish2001 <[email protected]>

* add staticSecretRenderInterval to injector (hashicorp#621) * make staticSecretRenderInterval default to empty string * update values schema to add staticSecretRenderInterval * add test for default value * adding changelog entry Co-authored-by: Theron Voran <[email protected]> * Update jira action (hashicorp#644) * No longer check for Vault team membership * Tweak jira states and search parameters * remove support for the leader-elector container (hashicorp#649) * vault-helm 0.18.0 release (hashicorp#650) * Run CI tests in github workflows (hashicorp#657) Ports the bats unit, chart-verifier, and bats acceptance tests to use github workflows and actions. The acceptance tests run using kind, and run for multiple k8s versions, on pushes to the main branch. Adds a SKIP_CSI env check in the CSI acceptance test, set in the workflow if K8s version is less than 1.16. Adds kubeAdmConfigPatches to the kind config to allow testing the CSI provider on K8s versions prior to 1.21. Updates the Secrets Store CSI driver to 1.0.0 in tests. Makes the HA Vault tests more robust by waiting for all consul client pods to be Ready, and waits with a timeout for Vault to start responding as sealed (since the tests on GitHub runners were often failing at that point). Co-authored-by: Tom Proctor <[email protected]> * Configurable PodDisruptionBudget for Injector (hashicorp#653) * Fix spelling error in server disruptionbudget test (hashicorp#654) * Make terminationGracePeriodSeconds configurable (hashicorp#659) Make terminationGracePeriodSeconds configurable for server pod * injector: ability to set deployment update strategy (continued) (hashicorp#661) Co-authored-by: Jason Hancock <[email protected]> * csi: ability to set priorityClassName for csi daemonset pods (hashicorp#670) * Fixed a small typo (hashicorp#672) * Disable unit and acceptance tests in CircleCI (hashicorp#675) * update CONTRIBUTING.md (hashicorp#677) Link to the discuss forum instead of the old google group and irc channel. Add info about the CLA. * add namespace support for openshift route (hashicorp#679) * Add volumes and env vars to helm hook test pod (hashicorp#673) * Fix test typo * Add basic server-test Pod tests - This covers all existing functionality that matches what's present in server-statefulset.bats * Fix server-test helm hook Pod rendering - Properly adhere to the global.enabled flag and the presence of the injector.externalVaultAddr setting, the same way that the servers StatefulSet behaves * Add volumes and env vars to helm hook test pod - Uses the same extraEnvironmentVars, volumes and volumeMounts set on the server statefulset to configure the Vault server test pod used by the helm test hook - This is necessary in situations where TLS is configured, but the certificates are not affiliated with the k8s CA / part of k8s PKI - Fixes hashicorpGH-665 * allow injection of TLS config for OpenShift routes (hashicorp#686) * Add some tests on top of hashicorp#396 * convert server-route.yaml to unix newlines * changelog Co-authored-by: André Becker <[email protected]> Co-authored-by: Theron Voran <[email protected]> * Release 0.19.0 (hashicorp#687) * Add extraLabels for CSI DaemonSet (hashicorp#690) * Updated hashicorp/vault-csi-provider image to v1.0.0 (hashicorp#689) * Fix unit test assertions (hashicorp#693) * vault: bump image to 1.9.3 (hashicorp#695) Signed-off-by: Lionel H <[email protected]> * changelog++ (hashicorp#699) * change helm trigger branch from master to main (hashicorp#700) * Add namespace to injector-leader-elector role, rolebinding and secret (hashicorp#683) * allow to configure publishNotReadyAddresses on server services (hashicorp#694) * Maintain pre-existing Mutating Webhook default values for Kubernetes 1.22 (hashicorp#692) * Prepare default values for MutatingWebhookConfiguration hashicorp#691 * Add values.yaml values to injector-mutating-webhook.yaml hashicorp#691 * Duplicate and deprecate top-level webhook settings and put them in a webhook object * Made the new values default with the fallback to the old values.yaml * Fix _helpers.tpl to support both old and new webhook annotations * Add new tests and deprecate old ones for injector webhook configuration * Old tests now work with old values.yaml * Add all new fields showing that they have priority over old ones * Add deprecation note to injector.failurePolicy hashicorp#691 * VAULT-571 Matching documented behavior and consul (hashicorp#703) VAULT-571 Matching documented behavior and consul Consul's helm template defaults most of the enabled to the special value `"-"`, which means to inherit from global. This is what is implied should happen in Vault as well according to the documentation for the helm chart: > [global.enabled] The master enabled/disabled configuration. If this is > true, most components will be installed by default. If this is false, > no components will be installed by default and manually opting-in is > required, such as by setting server.enabled to true. (https://www.vaultproject.io/docs/platform/k8s/helm/configuration#enabled) We also simplified the chart logic using a few template helpers. Co-authored-by: Theron Voran <[email protected]> * Update k8s versions (hashicorp#706) * tests: updating the four most recent k8s versions * bump oldest version to 1.16 * docs, Chart.yaml, and changelog for 1.14 -> 1.16 * Fix values schema to support config in YAML (hashicorp#684) * Support policy/v1 disruptionbudget beyond kube 1.21 (hashicorp#710) Issue hashicorp#667, adding updates to the disruptionbudget to support new non beta spec beyond kube 1.21 * Remove unncessary template calls (hashicorp#712) - As part of VAULT-571 / hashicorp#703 in 7109159, a new vault.serverEnabled template was added (and included in vault.mode) Various templates were updated accordingly, but those that were already calling vault.mode had an additonal call to vault.serverEnabled made which was unnecessary Remove those * Issue 629: updated to allow customization of the CLUSTER_ADDR the same… (hashicorp#709) * Issue hashicorp#629 Updates to allow customization of the CLUSTER_ADDR and unit tests to go with it * Issue-hashicorp#629 removing extra whitespace I added accidently. * Issue-hashicorp#629 fixing extra whitespace added. * Update values.yaml Co-authored-by: Joaco Muleiro Beltran <[email protected]> * Issue hashicorp#629 adding changelog Co-authored-by: Joaco Muleiro Beltran <[email protected]> * VAULT-5838 Update CSI provider to 1.1.0 (hashicorp#721) * VAULT-5838 Update CSI provider to 1.1.0 * Update test/acceptance/csi.bats Co-authored-by: Theron Voran <[email protected]> Co-authored-by: Theron Voran <[email protected]> * VUALT-5838 Restore Secrets Store CSI driver to 1.0.0 (hashicorp#722) 1.0.1+ seems to only support Kubernetes 1.19+, so we break support for 1.16 if we upgrade * Implement support for Topology Spread Constraints (hashicorp#652) * Implemented support for topology spread constraints * Update values.yaml Co-authored-by: Ben Ash <[email protected]> * Update values.yaml Co-authored-by: Ben Ash <[email protected]> * Add topologySpreadConstraints to values schema * Implement injector deployment topology spread UTs * also remove string from the relevant schema types * Implement injector statefulset topology spread UTs * Implement injector HA statefulset topology UTs * Allow topologySpreadConstraints to be a string Co-authored-by: Ellis Tarn <[email protected]> Co-authored-by: Ben Ash <[email protected]> Co-authored-by: Christopher Swenson <[email protected]> * Update the changelog with changes from 614 and 652 (hashicorp#723) * Update the changelog with changes from 614 and 652 * Update CHANGELOG.md Co-authored-by: Theron Voran <[email protected]> Co-authored-by: Theron Voran <[email protected]> * Prepare v0.20.0 release (hashicorp#727) --------- Signed-off-by: Lionel H <[email protected]> Co-authored-by: Kaito Ii <[email protected]> Co-authored-by: Theron Voran <[email protected]> Co-authored-by: Tom Proctor <[email protected]> Co-authored-by: Eric Miller <[email protected]> Co-authored-by: Takumi Sue <[email protected]> Co-authored-by: Jason Hancock <[email protected]> Co-authored-by: Vadim Grek <[email protected]> Co-authored-by: nikstur <[email protected]> Co-authored-by: Jacob Mammoliti <[email protected]> Co-authored-by: Ethan J. Brown <[email protected]> Co-authored-by: Michele Baldessari <[email protected]> Co-authored-by: André Becker <[email protected]> Co-authored-by: Michael Schuett <[email protected]> Co-authored-by: Troy Fluegge <[email protected]> Co-authored-by: lion24 <[email protected]> Co-authored-by: Alvin Huang <[email protected]> Co-authored-by: Christian <[email protected]> Co-authored-by: Viacheslav Vasilyev <[email protected]> Co-authored-by: Remco Buddelmeijer <[email protected]> Co-authored-by: Christopher Swenson <[email protected]> Co-authored-by: gw0 <[email protected]> Co-authored-by: Stephen Herd <[email protected]> Co-authored-by: Joaco Muleiro Beltran <[email protected]> Co-authored-by: Ellis Tarn <[email protected]> Co-authored-by: Ben Ash <[email protected]>

* add staticSecretRenderInterval to injector (hashicorp#621) * make staticSecretRenderInterval default to empty string * update values schema to add staticSecretRenderInterval * add test for default value * adding changelog entry Co-authored-by: Theron Voran <[email protected]> * Update jira action (hashicorp#644) * No longer check for Vault team membership * Tweak jira states and search parameters * remove support for the leader-elector container (hashicorp#649) * vault-helm 0.18.0 release (hashicorp#650) * Run CI tests in github workflows (hashicorp#657) Ports the bats unit, chart-verifier, and bats acceptance tests to use github workflows and actions. The acceptance tests run using kind, and run for multiple k8s versions, on pushes to the main branch. Adds a SKIP_CSI env check in the CSI acceptance test, set in the workflow if K8s version is less than 1.16. Adds kubeAdmConfigPatches to the kind config to allow testing the CSI provider on K8s versions prior to 1.21. Updates the Secrets Store CSI driver to 1.0.0 in tests. Makes the HA Vault tests more robust by waiting for all consul client pods to be Ready, and waits with a timeout for Vault to start responding as sealed (since the tests on GitHub runners were often failing at that point). Co-authored-by: Tom Proctor <[email protected]> * Configurable PodDisruptionBudget for Injector (hashicorp#653) * Fix spelling error in server disruptionbudget test (hashicorp#654) * Make terminationGracePeriodSeconds configurable (hashicorp#659) Make terminationGracePeriodSeconds configurable for server pod * injector: ability to set deployment update strategy (continued) (hashicorp#661) Co-authored-by: Jason Hancock <[email protected]> * csi: ability to set priorityClassName for csi daemonset pods (hashicorp#670) * Fixed a small typo (hashicorp#672) * Disable unit and acceptance tests in CircleCI (hashicorp#675) * update CONTRIBUTING.md (hashicorp#677) Link to the discuss forum instead of the old google group and irc channel. Add info about the CLA. * add namespace support for openshift route (hashicorp#679) * Add volumes and env vars to helm hook test pod (hashicorp#673) * Fix test typo * Add basic server-test Pod tests - This covers all existing functionality that matches what's present in server-statefulset.bats * Fix server-test helm hook Pod rendering - Properly adhere to the global.enabled flag and the presence of the injector.externalVaultAddr setting, the same way that the servers StatefulSet behaves * Add volumes and env vars to helm hook test pod - Uses the same extraEnvironmentVars, volumes and volumeMounts set on the server statefulset to configure the Vault server test pod used by the helm test hook - This is necessary in situations where TLS is configured, but the certificates are not affiliated with the k8s CA / part of k8s PKI - Fixes hashicorpGH-665 * allow injection of TLS config for OpenShift routes (hashicorp#686) * Add some tests on top of hashicorp#396 * convert server-route.yaml to unix newlines * changelog Co-authored-by: André Becker <[email protected]> Co-authored-by: Theron Voran <[email protected]> * Release 0.19.0 (hashicorp#687) * Explain this fork in the README * Adding support for LoadBalancerIP field in ServiceSpec * DATAGO-13861: Adding support for logrotate * DATAGO-13861: Adding audit log rotation and shipment to datdog * Fixing minor typos and removing extra lines * Update to 0.4.0 * Explain this fork in the README * Adding support for LoadBalancerIP field in ServiceSpec * DATAGO-13861: Adding support for logrotate * DATAGO-13861: Adding audit log rotation and shipment to datdog * Fixing minor typos and removing extra lines * feat(DATAGO-27002): Upgrade vault to version 1.7.9 (#12) * Add objectSelector to webhookconfiguration (hashicorp#456) * changelog++ * Add CSI secrets store provider (hashicorp#461) * updating acceptance tests to k8s 1.17 on gke (hashicorp#473) * changelog++ * Target vault-csi-provider release 0.1.0 (hashicorp#475) * Update to 0.10.0 (hashicorp#477) * Update to v0.10.0 * Fix typo * Add csi link in changelog * Add volumes and mounts support for CSI (hashicorp#479) * Remove extraVolumes from CSI, add volumes and mounts * Add better example * changelog++ * Remove extra word in readme (hashicorp#482) * fix csi helm deployment (hashicorp#486) * fix serviceaccount and clusterrole name reference (full name) * add server.enabled option, align with documentation * add unit tests * update server.enabled behaviour to explicit true and update tests * changelog++ * add hostNetwork value to injector deployment (hashicorp#471) * add hostNetwork value to injector deployment * adding unit tests * changelog++ * feat(ingress): Extra paths to prepend to the ingress host configuration for annotation based services (hashicorp#460) Refs hashicorp#361 * changelog++ * Add logLevel and logFormat values for Vault (hashicorp#488) * Add logLevel and logFormat values for Vault * Add configurable tests * Update order of log levels * Update values.yaml * Update per review * Update test/unit/server-statefulset.bats Co-authored-by: Tom Proctor <[email protected]> * Update test/unit/server-statefulset.bats Co-authored-by: Tom Proctor <[email protected]> Co-authored-by: Tom Proctor <[email protected]> * changelog++ * Custom value of agent port (hashicorp#489) * configure the agent port * add unit test * remove default * remove default * Update values.yaml Co-authored-by: Jason O'Donnell <[email protected]> Co-authored-by: Jason O'Donnell <[email protected]> * changelog++ * Add injector agent default overrides (hashicorp#493) * Add injector agent default overrides * Update test/unit/injector-deployment.bats Co-authored-by: Theron Voran <[email protected]> * Update test/unit/injector-deployment.bats Co-authored-by: Theron Voran <[email protected]> * Update test/unit/injector-deployment.bats Co-authored-by: Theron Voran <[email protected]> Co-authored-by: Theron Voran <[email protected]> * changelog++ * [injector] Add port name in injector service (hashicorp#495) * [injector] Add port name in injector service * [injector] Hardcore port to https * changelog++ * Fix injector unit test failing (hashicorp#496) * Fix injector unit test failing * Add null check * Add default if unset for CI * Remove redundant logic (hashicorp#434) * Update to v0.11.0 (hashicorp#497) * Add container based tests documentation (hashicorp#492) * update documentation with running unit tests using container * promote bats version to 1.3.0 * Update CONTRIBUTING.md Co-authored-by: Jason O'Donnell <[email protected]> * Update CONTRIBUTING.md Co-authored-by: Jason O'Donnell <[email protected]> Co-authored-by: Jason O'Donnell <[email protected]> * Set kubeVersion and added chart-verifier tests (hashicorp#510) Set min kubeVersion in Chart.yaml to 1.14. Added a chart-verifier bats test, and configured to run it in CI. Some verification tests that haven't been addressed yet are skipped. * changelog++ * match kubeVersion on semver pre-releases (hashicorp#512) Since clouds like GKE set their kubeVersion as a pre-release (e.g. v1.17.17-gke.6700) * Add ImagePullSecrets to CSI daemonset (hashicorp#519) * changelog++ * changelog++ * fix CONTRIBUTING.md (hashicorp#501) * updating to use new dedicated context and token (hashicorp#515) * added values json schema (hashicorp#513) Generated the schema using the helm schema-gen plugin, and added extra data types to fields that allow it, such as annotations, tolerations, enabled, etc. Enabled the "contains-value-schema" chart-verifier test. Co-authored-by: Jason O'Donnell <[email protected]> * changelog++ * [Issue-520] tolerations for csi-daemonset (hashicorp#521) Co-authored-by: Theron Voran <[email protected]> * changelog++ * Add extraArgs value for CSI (hashicorp#526) * changelog++ * add schema unit tests (hashicorp#530) * Add UI targetPort option (hashicorp#437) Use custom `targetPort` for UI service. See the usecase in hashicorp#385 (comment) * changelog++ * Update to v0.12.0 (hashicorp#532) * Update to v0.12.0 * Update values.schema.json * Fix schema types * revert image repo * Adding helm test for vault server (hashicorp#531) Also adds acceptance test for 'helm test' and updates the chart-verifier version. * changelog++ * fix ui.serviceNodePort schema (hashicorp#537) UI service nodePort defaults to null, but is set as an integer * changelog++ * change maxUnavailable to integer (hashicorp#535) change maxUnavailable from `null` to `integer` to enable upgrade from 0.11.0 to 0.12.0 when using the specific variable. * Also allow null value Co-authored-by: Theron Voran <[email protected]> * add test for server.ha.disruptionBudget.maxUnavailable Co-authored-by: Theron Voran <[email protected]> * changelog++ * use vault-helm-test:0.2.0 (hashicorp#543) * Added webhook-certs volume mount to sidecar injector (hashicorp#545) * Removed webhook-certs volume mount from leader-elector container * Added test: injector deployment manual TLS adds volume mount * changelog++ * Adding server.enterpriseLicense (hashicorp#547) Sets up a vault-enterprise license for autoloading on vault startup. Mounts an existing secret to /vault/license and sets VAULT_LICENSE_PATH appropriately. * changelog++ * Add openshift overrides (hashicorp#549) Adds default overrides for OpenShift (values.openshift.yaml) and uses them in the chart-verifier tests. * changelog++ * Update to v0.13.0 (hashicorp#554) * Explain this fork in the README * Adding support for LoadBalancerIP field in ServiceSpec * DATAGO-13861: Adding support for logrotate * DATAGO-13861: Adding audit log rotation and shipment to datdog * Fixing minor typos and removing extra lines * DATAGO-13861: Adding support for logrotate * DATAGO-13861: Adding audit log rotation and shipment to datdog * Fixing minor typos and removing extra lines * feat(DATAGO-27002): Upgrade to 1.7.9 * chore(DATAGO-27002): Fix doc issue Co-authored-by: guru1306 <[email protected]> Co-authored-by: Jason O'Donnell <[email protected]> Co-authored-by: Tom Proctor <[email protected]> Co-authored-by: Theron Voran <[email protected]> Co-authored-by: Paul <[email protected]> Co-authored-by: Arie Lev <[email protected]> Co-authored-by: Paul Witt <[email protected]> Co-authored-by: Sam Marshall <[email protected]> Co-authored-by: Hamza ZOUHAIR <[email protected]> Co-authored-by: Javier Criado Marcos <[email protected]> Co-authored-by: mehmetsalgar <[email protected]> Co-authored-by: Sarah Thompson <[email protected]> Co-authored-by: Iñigo Horcajo <[email protected]> Co-authored-by: Rule88 <[email protected]> Co-authored-by: Ricardo Gândara Pinto <[email protected]> Co-authored-by: Julian Setiawan <[email protected]> Co-authored-by: marcboudreau <[email protected]> Co-authored-by: Hadie Laham <[email protected]> * fix: deploy_local.sh error with file * minor changes * Adding support for LoadBalancerIP field in ServiceSpec * DATAGO-13861: Adding support for logrotate * DATAGO-13861: Adding audit log rotation and shipment to datdog * Fixing minor typos and removing extra lines * DATAGO-13861: Adding support for logrotate * DATAGO-13861: Adding audit log rotation and shipment to datdog * Fixing minor typos and removing extra lines * feat(DATAGO-27002): Upgrade vault to version 1.7.9 (#12) * Add objectSelector to webhookconfiguration (hashicorp#456) * changelog++ * Add CSI secrets store provider (hashicorp#461) * updating acceptance tests to k8s 1.17 on gke (hashicorp#473) * changelog++ * Target vault-csi-provider release 0.1.0 (hashicorp#475) * Update to 0.10.0 (hashicorp#477) * Update to v0.10.0 * Fix typo * Add csi link in changelog * Add volumes and mounts support for CSI (hashicorp#479) * Remove extraVolumes from CSI, add volumes and mounts * Add better example * changelog++ * Remove extra word in readme (hashicorp#482) * fix csi helm deployment (hashicorp#486) * fix serviceaccount and clusterrole name reference (full name) * add server.enabled option, align with documentation * add unit tests * update server.enabled behaviour to explicit true and update tests * changelog++ * add hostNetwork value to injector deployment (hashicorp#471) * add hostNetwork value to injector deployment * adding unit tests * changelog++ * feat(ingress): Extra paths to prepend to the ingress host configuration for annotation based services (hashicorp#460) Refs hashicorp#361 * changelog++ * Add logLevel and logFormat values for Vault (hashicorp#488) * Add logLevel and logFormat values for Vault * Add configurable tests * Update order of log levels * Update values.yaml * Update per review * Update test/unit/server-statefulset.bats Co-authored-by: Tom Proctor <[email protected]> * Update test/unit/server-statefulset.bats Co-authored-by: Tom Proctor <[email protected]> Co-authored-by: Tom Proctor <[email protected]> * changelog++ * Custom value of agent port (hashicorp#489) * configure the agent port * add unit test * remove default * remove default * Update values.yaml Co-authored-by: Jason O'Donnell <[email protected]> Co-authored-by: Jason O'Donnell <[email protected]> * changelog++ * Add injector agent default overrides (hashicorp#493) * Add injector agent default overrides * Update test/unit/injector-deployment.bats Co-authored-by: Theron Voran <[email protected]> * Update test/unit/injector-deployment.bats Co-authored-by: Theron Voran <[email protected]> * Update test/unit/injector-deployment.bats Co-authored-by: Theron Voran <[email protected]> Co-authored-by: Theron Voran <[email protected]> * changelog++ * [injector] Add port name in injector service (hashicorp#495) * [injector] Add port name in injector service * [injector] Hardcore port to https * changelog++ * Fix injector unit test failing (hashicorp#496) * Fix injector unit test failing * Add null check * Add default if unset for CI * Remove redundant logic (hashicorp#434) * Update to v0.11.0 (hashicorp#497) * Add container based tests documentation (hashicorp#492) * update documentation with running unit tests using container * promote bats version to 1.3.0 * Update CONTRIBUTING.md Co-authored-by: Jason O'Donnell <[email protected]> * Update CONTRIBUTING.md Co-authored-by: Jason O'Donnell <[email protected]> Co-authored-by: Jason O'Donnell <[email protected]> * Set kubeVersion and added chart-verifier tests (hashicorp#510) Set min kubeVersion in Chart.yaml to 1.14. Added a chart-verifier bats test, and configured to run it in CI. Some verification tests that haven't been addressed yet are skipped. * changelog++ * match kubeVersion on semver pre-releases (hashicorp#512) Since clouds like GKE set their kubeVersion as a pre-release (e.g. v1.17.17-gke.6700) * Add ImagePullSecrets to CSI daemonset (hashicorp#519) * changelog++ * changelog++ * fix CONTRIBUTING.md (hashicorp#501) * updating to use new dedicated context and token (hashicorp#515) * added values json schema (hashicorp#513) Generated the schema using the helm schema-gen plugin, and added extra data types to fields that allow it, such as annotations, tolerations, enabled, etc. Enabled the "contains-value-schema" chart-verifier test. Co-authored-by: Jason O'Donnell <[email protected]> * changelog++ * [Issue-520] tolerations for csi-daemonset (hashicorp#521) Co-authored-by: Theron Voran <[email protected]> * changelog++ * Add extraArgs value for CSI (hashicorp#526) * changelog++ * add schema unit tests (hashicorp#530) * Add UI targetPort option (hashicorp#437) Use custom `targetPort` for UI service. See the usecase in hashicorp#385 (comment) * changelog++ * Update to v0.12.0 (hashicorp#532) * Update to v0.12.0 * Update values.schema.json * Fix schema types * revert image repo * Adding helm test for vault server (hashicorp#531) Also adds acceptance test for 'helm test' and updates the chart-verifier version. * changelog++ * fix ui.serviceNodePort schema (hashicorp#537) UI service nodePort defaults to null, but is set as an integer * changelog++ * change maxUnavailable to integer (hashicorp#535) change maxUnavailable from `null` to `integer` to enable upgrade from 0.11.0 to 0.12.0 when using the specific variable. * Also allow null value Co-authored-by: Theron Voran <[email protected]> * add test for server.ha.disruptionBudget.maxUnavailable Co-authored-by: Theron Voran <[email protected]> * changelog++ * use vault-helm-test:0.2.0 (hashicorp#543) * Added webhook-certs volume mount to sidecar injector (hashicorp#545) * Removed webhook-certs volume mount from leader-elector container * Added test: injector deployment manual TLS adds volume mount * changelog++ * Adding server.enterpriseLicense (hashicorp#547) Sets up a vault-enterprise license for autoloading on vault startup. Mounts an existing secret to /vault/license and sets VAULT_LICENSE_PATH appropriately. * changelog++ * Add openshift overrides (hashicorp#549) Adds default overrides for OpenShift (values.openshift.yaml) and uses them in the chart-verifier tests. * changelog++ * Update to v0.13.0 (hashicorp#554) * Explain this fork in the README * Adding support for LoadBalancerIP field in ServiceSpec * DATAGO-13861: Adding support for logrotate * DATAGO-13861: Adding audit log rotation and shipment to datdog * Fixing minor typos and removing extra lines * DATAGO-13861: Adding support for logrotate * DATAGO-13861: Adding audit log rotation and shipment to datdog * Fixing minor typos and removing extra lines * feat(DATAGO-27002): Upgrade to 1.7.9 * chore(DATAGO-27002): Fix doc issue Co-authored-by: guru1306 <[email protected]> Co-authored-by: Jason O'Donnell <[email protected]> Co-authored-by: Tom Proctor <[email protected]> Co-authored-by: Theron Voran <[email protected]> Co-authored-by: Paul <[email protected]> Co-authored-by: Arie Lev <[email protected]> Co-authored-by: Paul Witt <[email protected]> Co-authored-by: Sam Marshall <[email protected]> Co-authored-by: Hamza ZOUHAIR <[email protected]> Co-authored-by: Javier Criado Marcos <[email protected]> Co-authored-by: mehmetsalgar <[email protected]> Co-authored-by: Sarah Thompson <[email protected]> Co-authored-by: Iñigo Horcajo <[email protected]> Co-authored-by: Rule88 <[email protected]> Co-authored-by: Ricardo Gândara Pinto <[email protected]> Co-authored-by: Julian Setiawan <[email protected]> Co-authored-by: marcboudreau <[email protected]> Co-authored-by: Hadie Laham <[email protected]> * changed value to use tag 1.9.6 Co-authored-by: Kaito Ii <[email protected]> Co-authored-by: Theron Voran <[email protected]> Co-authored-by: Tom Proctor <[email protected]> Co-authored-by: Eric Miller <[email protected]> Co-authored-by: Takumi Sue <[email protected]> Co-authored-by: Jason Hancock <[email protected]> Co-authored-by: Vadim Grek <[email protected]> Co-authored-by: nikstur <[email protected]> Co-authored-by: Jacob Mammoliti <[email protected]> Co-authored-by: Ethan J. Brown <[email protected]> Co-authored-by: Michele Baldessari <[email protected]> Co-authored-by: André Becker <[email protected]> Co-authored-by: Julian Setiawan <[email protected]> Co-authored-by: marcboudreau <[email protected]> Co-authored-by: Hadie Laham <[email protected]> Co-authored-by: Jason O'Donnell <[email protected]> Co-authored-by: Subhrajit Nag <[email protected]> Co-authored-by: guru1306 <[email protected]> Co-authored-by: Paul <[email protected]> Co-authored-by: Arie Lev <[email protected]> Co-authored-by: Paul Witt <[email protected]> Co-authored-by: Sam Marshall <[email protected]> Co-authored-by: Hamza ZOUHAIR <[email protected]> Co-authored-by: Javier Criado Marcos <[email protected]> Co-authored-by: mehmetsalgar <[email protected]> Co-authored-by: Sarah Thompson <[email protected]> Co-authored-by: Iñigo Horcajo <[email protected]> Co-authored-by: Rule88 <[email protected]> Co-authored-by: Ricardo Gândara Pinto <[email protected]> Co-authored-by: adhish2001 <[email protected]>

* add staticSecretRenderInterval to injector (hashicorp#621) * make staticSecretRenderInterval default to empty string * update values schema to add staticSecretRenderInterval * add test for default value * adding changelog entry Co-authored-by: Theron Voran <[email protected]> * Update jira action (hashicorp#644) * No longer check for Vault team membership * Tweak jira states and search parameters * remove support for the leader-elector container (hashicorp#649) * vault-helm 0.18.0 release (hashicorp#650) * Run CI tests in github workflows (hashicorp#657) Ports the bats unit, chart-verifier, and bats acceptance tests to use github workflows and actions. The acceptance tests run using kind, and run for multiple k8s versions, on pushes to the main branch. Adds a SKIP_CSI env check in the CSI acceptance test, set in the workflow if K8s version is less than 1.16. Adds kubeAdmConfigPatches to the kind config to allow testing the CSI provider on K8s versions prior to 1.21. Updates the Secrets Store CSI driver to 1.0.0 in tests. Makes the HA Vault tests more robust by waiting for all consul client pods to be Ready, and waits with a timeout for Vault to start responding as sealed (since the tests on GitHub runners were often failing at that point). Co-authored-by: Tom Proctor <[email protected]> * Configurable PodDisruptionBudget for Injector (hashicorp#653) * Fix spelling error in server disruptionbudget test (hashicorp#654) * Make terminationGracePeriodSeconds configurable (hashicorp#659) Make terminationGracePeriodSeconds configurable for server pod * injector: ability to set deployment update strategy (continued) (hashicorp#661) Co-authored-by: Jason Hancock <[email protected]> * csi: ability to set priorityClassName for csi daemonset pods (hashicorp#670) * Fixed a small typo (hashicorp#672) * Disable unit and acceptance tests in CircleCI (hashicorp#675) * update CONTRIBUTING.md (hashicorp#677) Link to the discuss forum instead of the old google group and irc channel. Add info about the CLA. * add namespace support for openshift route (hashicorp#679) * Add volumes and env vars to helm hook test pod (hashicorp#673) * Fix test typo * Add basic server-test Pod tests - This covers all existing functionality that matches what's present in server-statefulset.bats * Fix server-test helm hook Pod rendering - Properly adhere to the global.enabled flag and the presence of the injector.externalVaultAddr setting, the same way that the servers StatefulSet behaves * Add volumes and env vars to helm hook test pod - Uses the same extraEnvironmentVars, volumes and volumeMounts set on the server statefulset to configure the Vault server test pod used by the helm test hook - This is necessary in situations where TLS is configured, but the certificates are not affiliated with the k8s CA / part of k8s PKI - Fixes hashicorpGH-665 * allow injection of TLS config for OpenShift routes (hashicorp#686) * Add some tests on top of hashicorp#396 * convert server-route.yaml to unix newlines * changelog Co-authored-by: André Becker <[email protected]> Co-authored-by: Theron Voran <[email protected]> * Release 0.19.0 (hashicorp#687) * Add extraLabels for CSI DaemonSet (hashicorp#690) * Updated hashicorp/vault-csi-provider image to v1.0.0 (hashicorp#689) * Fix unit test assertions (hashicorp#693) * vault: bump image to 1.9.3 (hashicorp#695) Signed-off-by: Lionel H <[email protected]> * changelog++ (hashicorp#699) * change helm trigger branch from master to main (hashicorp#700) * Add namespace to injector-leader-elector role, rolebinding and secret (hashicorp#683) * allow to configure publishNotReadyAddresses on server services (hashicorp#694) * Maintain pre-existing Mutating Webhook default values for Kubernetes 1.22 (hashicorp#692) * Prepare default values for MutatingWebhookConfiguration hashicorp#691 * Add values.yaml values to injector-mutating-webhook.yaml hashicorp#691 * Duplicate and deprecate top-level webhook settings and put them in a webhook object * Made the new values default with the fallback to the old values.yaml * Fix _helpers.tpl to support both old and new webhook annotations * Add new tests and deprecate old ones for injector webhook configuration * Old tests now work with old values.yaml * Add all new fields showing that they have priority over old ones * Add deprecation note to injector.failurePolicy hashicorp#691 * VAULT-571 Matching documented behavior and consul (hashicorp#703) VAULT-571 Matching documented behavior and consul Consul's helm template defaults most of the enabled to the special value `"-"`, which means to inherit from global. This is what is implied should happen in Vault as well according to the documentation for the helm chart: > [global.enabled] The master enabled/disabled configuration. If this is > true, most components will be installed by default. If this is false, > no components will be installed by default and manually opting-in is > required, such as by setting server.enabled to true. (https://www.vaultproject.io/docs/platform/k8s/helm/configuration#enabled) We also simplified the chart logic using a few template helpers. Co-authored-by: Theron Voran <[email protected]> * Update k8s versions (hashicorp#706) * tests: updating the four most recent k8s versions * bump oldest version to 1.16 * docs, Chart.yaml, and changelog for 1.14 -> 1.16 * Fix values schema to support config in YAML (hashicorp#684) * Support policy/v1 disruptionbudget beyond kube 1.21 (hashicorp#710) Issue hashicorp#667, adding updates to the disruptionbudget to support new non beta spec beyond kube 1.21 * Remove unncessary template calls (hashicorp#712) - As part of VAULT-571 / hashicorp#703 in 7109159, a new vault.serverEnabled template was added (and included in vault.mode) Various templates were updated accordingly, but those that were already calling vault.mode had an additonal call to vault.serverEnabled made which was unnecessary Remove those * Issue 629: updated to allow customization of the CLUSTER_ADDR the same… (hashicorp#709) * Issue hashicorp#629 Updates to allow customization of the CLUSTER_ADDR and unit tests to go with it * Issue-hashicorp#629 removing extra whitespace I added accidently. * Issue-hashicorp#629 fixing extra whitespace added. * Update values.yaml Co-authored-by: Joaco Muleiro Beltran <[email protected]> * Issue hashicorp#629 adding changelog Co-authored-by: Joaco Muleiro Beltran <[email protected]> * VAULT-5838 Update CSI provider to 1.1.0 (hashicorp#721) * VAULT-5838 Update CSI provider to 1.1.0 * Update test/acceptance/csi.bats Co-authored-by: Theron Voran <[email protected]> Co-authored-by: Theron Voran <[email protected]> * VUALT-5838 Restore Secrets Store CSI driver to 1.0.0 (hashicorp#722) 1.0.1+ seems to only support Kubernetes 1.19+, so we break support for 1.16 if we upgrade * Implement support for Topology Spread Constraints (hashicorp#652) * Implemented support for topology spread constraints * Update values.yaml Co-authored-by: Ben Ash <[email protected]> * Update values.yaml Co-authored-by: Ben Ash <[email protected]> * Add topologySpreadConstraints to values schema * Implement injector deployment topology spread UTs * also remove string from the relevant schema types * Implement injector statefulset topology spread UTs * Implement injector HA statefulset topology UTs * Allow topologySpreadConstraints to be a string Co-authored-by: Ellis Tarn <[email protected]> Co-authored-by: Ben Ash <[email protected]> Co-authored-by: Christopher Swenson <[email protected]> * Update the changelog with changes from 614 and 652 (hashicorp#723) * Update the changelog with changes from 614 and 652 * Update CHANGELOG.md Co-authored-by: Theron Voran <[email protected]> Co-authored-by: Theron Voran <[email protected]> * Prepare v0.20.0 release (hashicorp#727) --------- Signed-off-by: Lionel H <[email protected]> Co-authored-by: Kaito Ii <[email protected]> Co-authored-by: Theron Voran <[email protected]> Co-authored-by: Tom Proctor <[email protected]> Co-authored-by: Eric Miller <[email protected]> Co-authored-by: Takumi Sue <[email protected]> Co-authored-by: Jason Hancock <[email protected]> Co-authored-by: Vadim Grek <[email protected]> Co-authored-by: nikstur <[email protected]> Co-authored-by: Jacob Mammoliti <[email protected]> Co-authored-by: Ethan J. Brown <[email protected]> Co-authored-by: Michele Baldessari <[email protected]> Co-authored-by: André Becker <[email protected]> Co-authored-by: Michael Schuett <[email protected]> Co-authored-by: Troy Fluegge <[email protected]> Co-authored-by: lion24 <[email protected]> Co-authored-by: Alvin Huang <[email protected]> Co-authored-by: Christian <[email protected]> Co-authored-by: Viacheslav Vasilyev <[email protected]> Co-authored-by: Remco Buddelmeijer <[email protected]> Co-authored-by: Christopher Swenson <[email protected]> Co-authored-by: gw0 <[email protected]> Co-authored-by: Stephen Herd <[email protected]> Co-authored-by: Joaco Muleiro Beltran <[email protected]> Co-authored-by: Ellis Tarn <[email protected]> Co-authored-by: Ben Ash <[email protected]>

* add staticSecretRenderInterval to injector (hashicorp#621) * make staticSecretRenderInterval default to empty string * update values schema to add staticSecretRenderInterval * add test for default value * adding changelog entry Co-authored-by: Theron Voran <[email protected]> * Update jira action (hashicorp#644) * No longer check for Vault team membership * Tweak jira states and search parameters * remove support for the leader-elector container (hashicorp#649) * vault-helm 0.18.0 release (hashicorp#650) * Run CI tests in github workflows (hashicorp#657) Ports the bats unit, chart-verifier, and bats acceptance tests to use github workflows and actions. The acceptance tests run using kind, and run for multiple k8s versions, on pushes to the main branch. Adds a SKIP_CSI env check in the CSI acceptance test, set in the workflow if K8s version is less than 1.16. Adds kubeAdmConfigPatches to the kind config to allow testing the CSI provider on K8s versions prior to 1.21. Updates the Secrets Store CSI driver to 1.0.0 in tests. Makes the HA Vault tests more robust by waiting for all consul client pods to be Ready, and waits with a timeout for Vault to start responding as sealed (since the tests on GitHub runners were often failing at that point). Co-authored-by: Tom Proctor <[email protected]> * Configurable PodDisruptionBudget for Injector (hashicorp#653) * Fix spelling error in server disruptionbudget test (hashicorp#654) * Make terminationGracePeriodSeconds configurable (hashicorp#659) Make terminationGracePeriodSeconds configurable for server pod * injector: ability to set deployment update strategy (continued) (hashicorp#661) Co-authored-by: Jason Hancock <[email protected]> * csi: ability to set priorityClassName for csi daemonset pods (hashicorp#670) * Fixed a small typo (hashicorp#672) * Disable unit and acceptance tests in CircleCI (hashicorp#675) * update CONTRIBUTING.md (hashicorp#677) Link to the discuss forum instead of the old google group and irc channel. Add info about the CLA. * add namespace support for openshift route (hashicorp#679) * Add volumes and env vars to helm hook test pod (hashicorp#673) * Fix test typo * Add basic server-test Pod tests - This covers all existing functionality that matches what's present in server-statefulset.bats * Fix server-test helm hook Pod rendering - Properly adhere to the global.enabled flag and the presence of the injector.externalVaultAddr setting, the same way that the servers StatefulSet behaves * Add volumes and env vars to helm hook test pod - Uses the same extraEnvironmentVars, volumes and volumeMounts set on the server statefulset to configure the Vault server test pod used by the helm test hook - This is necessary in situations where TLS is configured, but the certificates are not affiliated with the k8s CA / part of k8s PKI - Fixes hashicorpGH-665 * allow injection of TLS config for OpenShift routes (hashicorp#686) * Add some tests on top of hashicorp#396 * convert server-route.yaml to unix newlines * changelog Co-authored-by: André Becker <[email protected]> Co-authored-by: Theron Voran <[email protected]> * Release 0.19.0 (hashicorp#687) * Explain this fork in the README * Adding support for LoadBalancerIP field in ServiceSpec * DATAGO-13861: Adding support for logrotate * DATAGO-13861: Adding audit log rotation and shipment to datdog * Fixing minor typos and removing extra lines * Update to 0.4.0 * Explain this fork in the README * Adding support for LoadBalancerIP field in ServiceSpec * DATAGO-13861: Adding support for logrotate * DATAGO-13861: Adding audit log rotation and shipment to datdog * Fixing minor typos and removing extra lines * feat(DATAGO-27002): Upgrade vault to version 1.7.9 (#12) * Add objectSelector to webhookconfiguration (hashicorp#456) * changelog++ * Add CSI secrets store provider (hashicorp#461) * updating acceptance tests to k8s 1.17 on gke (hashicorp#473) * changelog++ * Target vault-csi-provider release 0.1.0 (hashicorp#475) * Update to 0.10.0 (hashicorp#477) * Update to v0.10.0 * Fix typo * Add csi link in changelog * Add volumes and mounts support for CSI (hashicorp#479) * Remove extraVolumes from CSI, add volumes and mounts * Add better example * changelog++ * Remove extra word in readme (hashicorp#482) * fix csi helm deployment (hashicorp#486) * fix serviceaccount and clusterrole name reference (full name) * add server.enabled option, align with documentation * add unit tests * update server.enabled behaviour to explicit true and update tests * changelog++ * add hostNetwork value to injector deployment (hashicorp#471) * add hostNetwork value to injector deployment * adding unit tests * changelog++ * feat(ingress): Extra paths to prepend to the ingress host configuration for annotation based services (hashicorp#460) Refs hashicorp#361 * changelog++ * Add logLevel and logFormat values for Vault (hashicorp#488) * Add logLevel and logFormat values for Vault * Add configurable tests * Update order of log levels * Update values.yaml * Update per review * Update test/unit/server-statefulset.bats Co-authored-by: Tom Proctor <[email protected]> * Update test/unit/server-statefulset.bats Co-authored-by: Tom Proctor <[email protected]> Co-authored-by: Tom Proctor <[email protected]> * changelog++ * Custom value of agent port (hashicorp#489) * configure the agent port * add unit test * remove default * remove default * Update values.yaml Co-authored-by: Jason O'Donnell <[email protected]> Co-authored-by: Jason O'Donnell <[email protected]> * changelog++ * Add injector agent default overrides (hashicorp#493) * Add injector agent default overrides * Update test/unit/injector-deployment.bats Co-authored-by: Theron Voran <[email protected]> * Update test/unit/injector-deployment.bats Co-authored-by: Theron Voran <[email protected]> * Update test/unit/injector-deployment.bats Co-authored-by: Theron Voran <[email protected]> Co-authored-by: Theron Voran <[email protected]> * changelog++ * [injector] Add port name in injector service (hashicorp#495) * [injector] Add port name in injector service * [injector] Hardcore port to https * changelog++ * Fix injector unit test failing (hashicorp#496) * Fix injector unit test failing * Add null check * Add default if unset for CI * Remove redundant logic (hashicorp#434) * Update to v0.11.0 (hashicorp#497) * Add container based tests documentation (hashicorp#492) * update documentation with running unit tests using container * promote bats version to 1.3.0 * Update CONTRIBUTING.md Co-authored-by: Jason O'Donnell <[email protected]> * Update CONTRIBUTING.md Co-authored-by: Jason O'Donnell <[email protected]> Co-authored-by: Jason O'Donnell <[email protected]> * Set kubeVersion and added chart-verifier tests (hashicorp#510) Set min kubeVersion in Chart.yaml to 1.14. Added a chart-verifier bats test, and configured to run it in CI. Some verification tests that haven't been addressed yet are skipped. * changelog++ * match kubeVersion on semver pre-releases (hashicorp#512) Since clouds like GKE set their kubeVersion as a pre-release (e.g. v1.17.17-gke.6700) * Add ImagePullSecrets to CSI daemonset (hashicorp#519) * changelog++ * changelog++ * fix CONTRIBUTING.md (hashicorp#501) * updating to use new dedicated context and token (hashicorp#515) * added values json schema (hashicorp#513) Generated the schema using the helm schema-gen plugin, and added extra data types to fields that allow it, such as annotations, tolerations, enabled, etc. Enabled the "contains-value-schema" chart-verifier test. Co-authored-by: Jason O'Donnell <[email protected]> * changelog++ * [Issue-520] tolerations for csi-daemonset (hashicorp#521) Co-authored-by: Theron Voran <[email protected]> * changelog++ * Add extraArgs value for CSI (hashicorp#526) * changelog++ * add schema unit tests (hashicorp#530) * Add UI targetPort option (hashicorp#437) Use custom `targetPort` for UI service. See the usecase in hashicorp#385 (comment) * changelog++ * Update to v0.12.0 (hashicorp#532) * Update to v0.12.0 * Update values.schema.json * Fix schema types * revert image repo * Adding helm test for vault server (hashicorp#531) Also adds acceptance test for 'helm test' and updates the chart-verifier version. * changelog++ * fix ui.serviceNodePort schema (hashicorp#537) UI service nodePort defaults to null, but is set as an integer * changelog++ * change maxUnavailable to integer (hashicorp#535) change maxUnavailable from `null` to `integer` to enable upgrade from 0.11.0 to 0.12.0 when using the specific variable. * Also allow null value Co-authored-by: Theron Voran <[email protected]> * add test for server.ha.disruptionBudget.maxUnavailable Co-authored-by: Theron Voran <[email protected]> * changelog++ * use vault-helm-test:0.2.0 (hashicorp#543) * Added webhook-certs volume mount to sidecar injector (hashicorp#545) * Removed webhook-certs volume mount from leader-elector container * Added test: injector deployment manual TLS adds volume mount * changelog++ * Adding server.enterpriseLicense (hashicorp#547) Sets up a vault-enterprise license for autoloading on vault startup. Mounts an existing secret to /vault/license and sets VAULT_LICENSE_PATH appropriately. * changelog++ * Add openshift overrides (hashicorp#549) Adds default overrides for OpenShift (values.openshift.yaml) and uses them in the chart-verifier tests. * changelog++ * Update to v0.13.0 (hashicorp#554) * Explain this fork in the README * Adding support for LoadBalancerIP field in ServiceSpec * DATAGO-13861: Adding support for logrotate * DATAGO-13861: Adding audit log rotation and shipment to datdog * Fixing minor typos and removing extra lines * DATAGO-13861: Adding support for logrotate * DATAGO-13861: Adding audit log rotation and shipment to datdog * Fixing minor typos and removing extra lines * feat(DATAGO-27002): Upgrade to 1.7.9 * chore(DATAGO-27002): Fix doc issue Co-authored-by: guru1306 <[email protected]> Co-authored-by: Jason O'Donnell <[email protected]> Co-authored-by: Tom Proctor <[email protected]> Co-authored-by: Theron Voran <[email protected]> Co-authored-by: Paul <[email protected]> Co-authored-by: Arie Lev <[email protected]> Co-authored-by: Paul Witt <[email protected]> Co-authored-by: Sam Marshall <[email protected]> Co-authored-by: Hamza ZOUHAIR <[email protected]> Co-authored-by: Javier Criado Marcos <[email protected]> Co-authored-by: mehmetsalgar <[email protected]> Co-authored-by: Sarah Thompson <[email protected]> Co-authored-by: Iñigo Horcajo <[email protected]> Co-authored-by: Rule88 <[email protected]> Co-authored-by: Ricardo Gândara Pinto <[email protected]> Co-authored-by: Julian Setiawan <[email protected]> Co-authored-by: marcboudreau <[email protected]> Co-authored-by: Hadie Laham <[email protected]> * fix: deploy_local.sh error with file * minor changes * Adding support for LoadBalancerIP field in ServiceSpec * DATAGO-13861: Adding support for logrotate * DATAGO-13861: Adding audit log rotation and shipment to datdog * Fixing minor typos and removing extra lines * DATAGO-13861: Adding support for logrotate * DATAGO-13861: Adding audit log rotation and shipment to datdog * Fixing minor typos and removing extra lines * feat(DATAGO-27002): Upgrade vault to version 1.7.9 (#12) * Add objectSelector to webhookconfiguration (hashicorp#456) * changelog++ * Add CSI secrets store provider (hashicorp#461) * updating acceptance tests to k8s 1.17 on gke (hashicorp#473) * changelog++ * Target vault-csi-provider release 0.1.0 (hashicorp#475) * Update to 0.10.0 (hashicorp#477) * Update to v0.10.0 * Fix typo * Add csi link in changelog * Add volumes and mounts support for CSI (hashicorp#479) * Remove extraVolumes from CSI, add volumes and mounts * Add better example * changelog++ * Remove extra word in readme (hashicorp#482) * fix csi helm deployment (hashicorp#486) * fix serviceaccount and clusterrole name reference (full name) * add server.enabled option, align with documentation * add unit tests * update server.enabled behaviour to explicit true and update tests * changelog++ * add hostNetwork value to injector deployment (hashicorp#471) * add hostNetwork value to injector deployment * adding unit tests * changelog++ * feat(ingress): Extra paths to prepend to the ingress host configuration for annotation based services (hashicorp#460) Refs hashicorp#361 * changelog++ * Add logLevel and logFormat values for Vault (hashicorp#488) * Add logLevel and logFormat values for Vault * Add configurable tests * Update order of log levels * Update values.yaml * Update per review * Update test/unit/server-statefulset.bats Co-authored-by: Tom Proctor <[email protected]> * Update test/unit/server-statefulset.bats Co-authored-by: Tom Proctor <[email protected]> Co-authored-by: Tom Proctor <[email protected]> * changelog++ * Custom value of agent port (hashicorp#489) * configure the agent port * add unit test * remove default * remove default * Update values.yaml Co-authored-by: Jason O'Donnell <[email protected]> Co-authored-by: Jason O'Donnell <[email protected]> * changelog++ * Add injector agent default overrides (hashicorp#493) * Add injector agent default overrides * Update test/unit/injector-deployment.bats Co-authored-by: Theron Voran <[email protected]> * Update test/unit/injector-deployment.bats Co-authored-by: Theron Voran <[email protected]> * Update test/unit/injector-deployment.bats Co-authored-by: Theron Voran <[email protected]> Co-authored-by: Theron Voran <[email protected]> * changelog++ * [injector] Add port name in injector service (hashicorp#495) * [injector] Add port name in injector service * [injector] Hardcore port to https * changelog++ * Fix injector unit test failing (hashicorp#496) * Fix injector unit test failing * Add null check * Add default if unset for CI * Remove redundant logic (hashicorp#434) * Update to v0.11.0 (hashicorp#497) * Add container based tests documentation (hashicorp#492) * update documentation with running unit tests using container * promote bats version to 1.3.0 * Update CONTRIBUTING.md Co-authored-by: Jason O'Donnell <[email protected]> * Update CONTRIBUTING.md Co-authored-by: Jason O'Donnell <[email protected]> Co-authored-by: Jason O'Donnell <[email protected]> * Set kubeVersion and added chart-verifier tests (hashicorp#510) Set min kubeVersion in Chart.yaml to 1.14. Added a chart-verifier bats test, and configured to run it in CI. Some verification tests that haven't been addressed yet are skipped. * changelog++ * match kubeVersion on semver pre-releases (hashicorp#512) Since clouds like GKE set their kubeVersion as a pre-release (e.g. v1.17.17-gke.6700) * Add ImagePullSecrets to CSI daemonset (hashicorp#519) * changelog++ * changelog++ * fix CONTRIBUTING.md (hashicorp#501) * updating to use new dedicated context and token (hashicorp#515) * added values json schema (hashicorp#513) Generated the schema using the helm schema-gen plugin, and added extra data types to fields that allow it, such as annotations, tolerations, enabled, etc. Enabled the "contains-value-schema" chart-verifier test. Co-authored-by: Jason O'Donnell <[email protected]> * changelog++ * [Issue-520] tolerations for csi-daemonset (hashicorp#521) Co-authored-by: Theron Voran <[email protected]> * changelog++ * Add extraArgs value for CSI (hashicorp#526) * changelog++ * add schema unit tests (hashicorp#530) * Add UI targetPort option (hashicorp#437) Use custom `targetPort` for UI service. See the usecase in hashicorp#385 (comment) * changelog++ * Update to v0.12.0 (hashicorp#532) * Update to v0.12.0 * Update values.schema.json * Fix schema types * revert image repo * Adding helm test for vault server (hashicorp#531) Also adds acceptance test for 'helm test' and updates the chart-verifier version. * changelog++ * fix ui.serviceNodePort schema (hashicorp#537) UI service nodePort defaults to null, but is set as an integer * changelog++ * change maxUnavailable to integer (hashicorp#535) change maxUnavailable from `null` to `integer` to enable upgrade from 0.11.0 to 0.12.0 when using the specific variable. * Also allow null value Co-authored-by: Theron Voran <[email protected]> * add test for server.ha.disruptionBudget.maxUnavailable Co-authored-by: Theron Voran <[email protected]> * changelog++ * use vault-helm-test:0.2.0 (hashicorp#543) * Added webhook-certs volume mount to sidecar injector (hashicorp#545) * Removed webhook-certs volume mount from leader-elector container * Added test: injector deployment manual TLS adds volume mount * changelog++ * Adding server.enterpriseLicense (hashicorp#547) Sets up a vault-enterprise license for autoloading on vault startup. Mounts an existing secret to /vault/license and sets VAULT_LICENSE_PATH appropriately. * changelog++ * Add openshift overrides (hashicorp#549) Adds default overrides for OpenShift (values.openshift.yaml) and uses them in the chart-verifier tests. * changelog++ * Update to v0.13.0 (hashicorp#554) * Explain this fork in the README * Adding support for LoadBalancerIP field in ServiceSpec * DATAGO-13861: Adding support for logrotate * DATAGO-13861: Adding audit log rotation and shipment to datdog * Fixing minor typos and removing extra lines * DATAGO-13861: Adding support for logrotate * DATAGO-13861: Adding audit log rotation and shipment to datdog * Fixing minor typos and removing extra lines * feat(DATAGO-27002): Upgrade to 1.7.9 * chore(DATAGO-27002): Fix doc issue Co-authored-by: guru1306 <[email protected]> Co-authored-by: Jason O'Donnell <[email protected]> Co-authored-by: Tom Proctor <[email protected]> Co-authored-by: Theron Voran <[email protected]> Co-authored-by: Paul <[email protected]> Co-authored-by: Arie Lev <[email protected]> Co-authored-by: Paul Witt <[email protected]> Co-authored-by: Sam Marshall <[email protected]> Co-authored-by: Hamza ZOUHAIR <[email protected]> Co-authored-by: Javier Criado Marcos <[email protected]> Co-authored-by: mehmetsalgar <[email protected]> Co-authored-by: Sarah Thompson <[email protected]> Co-authored-by: Iñigo Horcajo <[email protected]> Co-authored-by: Rule88 <[email protected]> Co-authored-by: Ricardo Gândara Pinto <[email protected]> Co-authored-by: Julian Setiawan <[email protected]> Co-authored-by: marcboudreau <[email protected]> Co-authored-by: Hadie Laham <[email protected]> * changed value to use tag 1.9.6 Co-authored-by: Kaito Ii <[email protected]> Co-authored-by: Theron Voran <[email protected]> Co-authored-by: Tom Proctor <[email protected]> Co-authored-by: Eric Miller <[email protected]> Co-authored-by: Takumi Sue <[email protected]> Co-authored-by: Jason Hancock <[email protected]> Co-authored-by: Vadim Grek <[email protected]> Co-authored-by: nikstur <[email protected]> Co-authored-by: Jacob Mammoliti <[email protected]> Co-authored-by: Ethan J. Brown <[email protected]> Co-authored-by: Michele Baldessari <[email protected]> Co-authored-by: André Becker <[email protected]> Co-authored-by: Julian Setiawan <[email protected]> Co-authored-by: marcboudreau <[email protected]> Co-authored-by: Hadie Laham <[email protected]> Co-authored-by: Jason O'Donnell <[email protected]> Co-authored-by: Subhrajit Nag <[email protected]> Co-authored-by: guru1306 <[email protected]> Co-authored-by: Paul <[email protected]> Co-authored-by: Arie Lev <[email protected]> Co-authored-by: Paul Witt <[email protected]> Co-authored-by: Sam Marshall <[email protected]> Co-authored-by: Hamza ZOUHAIR <[email protected]> Co-authored-by: Javier Criado Marcos <[email protected]> Co-authored-by: mehmetsalgar <[email protected]> Co-authored-by: Sarah Thompson <[email protected]> Co-authored-by: Iñigo Horcajo <[email protected]> Co-authored-by: Rule88 <[email protected]> Co-authored-by: Ricardo Gândara Pinto <[email protected]> Co-authored-by: adhish2001 <[email protected]>

* add staticSecretRenderInterval to injector (hashicorp#621) * make staticSecretRenderInterval default to empty string * update values schema to add staticSecretRenderInterval * add test for default value * adding changelog entry Co-authored-by: Theron Voran <[email protected]> * Update jira action (hashicorp#644) * No longer check for Vault team membership * Tweak jira states and search parameters * remove support for the leader-elector container (hashicorp#649) * vault-helm 0.18.0 release (hashicorp#650) * Run CI tests in github workflows (hashicorp#657) Ports the bats unit, chart-verifier, and bats acceptance tests to use github workflows and actions. The acceptance tests run using kind, and run for multiple k8s versions, on pushes to the main branch. Adds a SKIP_CSI env check in the CSI acceptance test, set in the workflow if K8s version is less than 1.16. Adds kubeAdmConfigPatches to the kind config to allow testing the CSI provider on K8s versions prior to 1.21. Updates the Secrets Store CSI driver to 1.0.0 in tests. Makes the HA Vault tests more robust by waiting for all consul client pods to be Ready, and waits with a timeout for Vault to start responding as sealed (since the tests on GitHub runners were often failing at that point). Co-authored-by: Tom Proctor <[email protected]> * Configurable PodDisruptionBudget for Injector (hashicorp#653) * Fix spelling error in server disruptionbudget test (hashicorp#654) * Make terminationGracePeriodSeconds configurable (hashicorp#659) Make terminationGracePeriodSeconds configurable for server pod * injector: ability to set deployment update strategy (continued) (hashicorp#661) Co-authored-by: Jason Hancock <[email protected]> * csi: ability to set priorityClassName for csi daemonset pods (hashicorp#670) * Fixed a small typo (hashicorp#672) * Disable unit and acceptance tests in CircleCI (hashicorp#675) * update CONTRIBUTING.md (hashicorp#677) Link to the discuss forum instead of the old google group and irc channel. Add info about the CLA. * add namespace support for openshift route (hashicorp#679) * Add volumes and env vars to helm hook test pod (hashicorp#673) * Fix test typo * Add basic server-test Pod tests - This covers all existing functionality that matches what's present in server-statefulset.bats * Fix server-test helm hook Pod rendering - Properly adhere to the global.enabled flag and the presence of the injector.externalVaultAddr setting, the same way that the servers StatefulSet behaves * Add volumes and env vars to helm hook test pod - Uses the same extraEnvironmentVars, volumes and volumeMounts set on the server statefulset to configure the Vault server test pod used by the helm test hook - This is necessary in situations where TLS is configured, but the certificates are not affiliated with the k8s CA / part of k8s PKI - Fixes hashicorpGH-665 * allow injection of TLS config for OpenShift routes (hashicorp#686) * Add some tests on top of hashicorp#396 * convert server-route.yaml to unix newlines * changelog Co-authored-by: André Becker <[email protected]> Co-authored-by: Theron Voran <[email protected]> * Release 0.19.0 (hashicorp#687) * Add extraLabels for CSI DaemonSet (hashicorp#690) * Updated hashicorp/vault-csi-provider image to v1.0.0 (hashicorp#689) * Fix unit test assertions (hashicorp#693) * vault: bump image to 1.9.3 (hashicorp#695) Signed-off-by: Lionel H <[email protected]> * changelog++ (hashicorp#699) * change helm trigger branch from master to main (hashicorp#700) * Add namespace to injector-leader-elector role, rolebinding and secret (hashicorp#683) * allow to configure publishNotReadyAddresses on server services (hashicorp#694) * Maintain pre-existing Mutating Webhook default values for Kubernetes 1.22 (hashicorp#692) * Prepare default values for MutatingWebhookConfiguration hashicorp#691 * Add values.yaml values to injector-mutating-webhook.yaml hashicorp#691 * Duplicate and deprecate top-level webhook settings and put them in a webhook object * Made the new values default with the fallback to the old values.yaml * Fix _helpers.tpl to support both old and new webhook annotations * Add new tests and deprecate old ones for injector webhook configuration * Old tests now work with old values.yaml * Add all new fields showing that they have priority over old ones * Add deprecation note to injector.failurePolicy hashicorp#691 * VAULT-571 Matching documented behavior and consul (hashicorp#703) VAULT-571 Matching documented behavior and consul Consul's helm template defaults most of the enabled to the special value `"-"`, which means to inherit from global. This is what is implied should happen in Vault as well according to the documentation for the helm chart: > [global.enabled] The master enabled/disabled configuration. If this is > true, most components will be installed by default. If this is false, > no components will be installed by default and manually opting-in is > required, such as by setting server.enabled to true. (https://www.vaultproject.io/docs/platform/k8s/helm/configuration#enabled) We also simplified the chart logic using a few template helpers. Co-authored-by: Theron Voran <[email protected]> * Update k8s versions (hashicorp#706) * tests: updating the four most recent k8s versions * bump oldest version to 1.16 * docs, Chart.yaml, and changelog for 1.14 -> 1.16 * Fix values schema to support config in YAML (hashicorp#684) * Support policy/v1 disruptionbudget beyond kube 1.21 (hashicorp#710) Issue hashicorp#667, adding updates to the disruptionbudget to support new non beta spec beyond kube 1.21 * Remove unncessary template calls (hashicorp#712) - As part of VAULT-571 / hashicorp#703 in 7109159, a new vault.serverEnabled template was added (and included in vault.mode) Various templates were updated accordingly, but those that were already calling vault.mode had an additonal call to vault.serverEnabled made which was unnecessary Remove those * Issue 629: updated to allow customization of the CLUSTER_ADDR the same… (hashicorp#709) * Issue hashicorp#629 Updates to allow customization of the CLUSTER_ADDR and unit tests to go with it * Issue-hashicorp#629 removing extra whitespace I added accidently. * Issue-hashicorp#629 fixing extra whitespace added. * Update values.yaml Co-authored-by: Joaco Muleiro Beltran <[email protected]> * Issue hashicorp#629 adding changelog Co-authored-by: Joaco Muleiro Beltran <[email protected]> * VAULT-5838 Update CSI provider to 1.1.0 (hashicorp#721) * VAULT-5838 Update CSI provider to 1.1.0 * Update test/acceptance/csi.bats Co-authored-by: Theron Voran <[email protected]> Co-authored-by: Theron Voran <[email protected]> * VUALT-5838 Restore Secrets Store CSI driver to 1.0.0 (hashicorp#722) 1.0.1+ seems to only support Kubernetes 1.19+, so we break support for 1.16 if we upgrade * Implement support for Topology Spread Constraints (hashicorp#652) * Implemented support for topology spread constraints * Update values.yaml Co-authored-by: Ben Ash <[email protected]> * Update values.yaml Co-authored-by: Ben Ash <[email protected]> * Add topologySpreadConstraints to values schema * Implement injector deployment topology spread UTs * also remove string from the relevant schema types * Implement injector statefulset topology spread UTs * Implement injector HA statefulset topology UTs * Allow topologySpreadConstraints to be a string Co-authored-by: Ellis Tarn <[email protected]> Co-authored-by: Ben Ash <[email protected]> Co-authored-by: Christopher Swenson <[email protected]> * Update the changelog with changes from 614 and 652 (hashicorp#723) * Update the changelog with changes from 614 and 652 * Update CHANGELOG.md Co-authored-by: Theron Voran <[email protected]> Co-authored-by: Theron Voran <[email protected]> * Prepare v0.20.0 release (hashicorp#727) --------- Signed-off-by: Lionel H <[email protected]> Co-authored-by: Kaito Ii <[email protected]> Co-authored-by: Theron Voran <[email protected]> Co-authored-by: Tom Proctor <[email protected]> Co-authored-by: Eric Miller <[email protected]> Co-authored-by: Takumi Sue <[email protected]> Co-authored-by: Jason Hancock <[email protected]> Co-authored-by: Vadim Grek <[email protected]> Co-authored-by: nikstur <[email protected]> Co-authored-by: Jacob Mammoliti <[email protected]> Co-authored-by: Ethan J. Brown <[email protected]> Co-authored-by: Michele Baldessari <[email protected]> Co-authored-by: André Becker <[email protected]> Co-authored-by: Michael Schuett <[email protected]> Co-authored-by: Troy Fluegge <[email protected]> Co-authored-by: lion24 <[email protected]> Co-authored-by: Alvin Huang <[email protected]> Co-authored-by: Christian <[email protected]> Co-authored-by: Viacheslav Vasilyev <[email protected]> Co-authored-by: Remco Buddelmeijer <[email protected]> Co-authored-by: Christopher Swenson <[email protected]> Co-authored-by: gw0 <[email protected]> Co-authored-by: Stephen Herd <[email protected]> Co-authored-by: Joaco Muleiro Beltran <[email protected]> Co-authored-by: Ellis Tarn <[email protected]> Co-authored-by: Ben Ash <[email protected]>

* add staticSecretRenderInterval to injector (#621) * make staticSecretRenderInterval default to empty string * update values schema to add staticSecretRenderInterval * add test for default value * adding changelog entry Co-authored-by: Theron Voran <[email protected]> * Update jira action (#644) * No longer check for Vault team membership * Tweak jira states and search parameters * remove support for the leader-elector container (#649) * vault-helm 0.18.0 release (#650) * Run CI tests in github workflows (#657) Ports the bats unit, chart-verifier, and bats acceptance tests to use github workflows and actions. The acceptance tests run using kind, and run for multiple k8s versions, on pushes to the main branch. Adds a SKIP_CSI env check in the CSI acceptance test, set in the workflow if K8s version is less than 1.16. Adds kubeAdmConfigPatches to the kind config to allow testing the CSI provider on K8s versions prior to 1.21. Updates the Secrets Store CSI driver to 1.0.0 in tests. Makes the HA Vault tests more robust by waiting for all consul client pods to be Ready, and waits with a timeout for Vault to start responding as sealed (since the tests on GitHub runners were often failing at that point). Co-authored-by: Tom Proctor <[email protected]> * Configurable PodDisruptionBudget for Injector (#653) * Fix spelling error in server disruptionbudget test (#654) * Make terminationGracePeriodSeconds configurable (#659) Make terminationGracePeriodSeconds configurable for server pod * injector: ability to set deployment update strategy (continued) (#661) Co-authored-by: Jason Hancock <[email protected]> * csi: ability to set priorityClassName for csi daemonset pods (#670) * Fixed a small typo (#672) * Disable unit and acceptance tests in CircleCI (#675) * update CONTRIBUTING.md (#677) Link to the discuss forum instead of the old google group and irc channel. Add info about the CLA. * add namespace support for openshift route (#679) * Add volumes and env vars to helm hook test pod (#673) * Fix test typo * Add basic server-test Pod tests - This covers all existing functionality that matches what's present in server-statefulset.bats * Fix server-test helm hook Pod rendering - Properly adhere to the global.enabled flag and the presence of the injector.externalVaultAddr setting, the same way that the servers StatefulSet behaves * Add volumes and env vars to helm hook test pod - Uses the same extraEnvironmentVars, volumes and volumeMounts set on the server statefulset to configure the Vault server test pod used by the helm test hook - This is necessary in situations where TLS is configured, but the certificates are not affiliated with the k8s CA / part of k8s PKI - Fixes GH-665 * allow injection of TLS config for OpenShift routes (#686) * Add some tests on top of #396 * convert server-route.yaml to unix newlines * changelog Co-authored-by: André Becker <[email protected]> Co-authored-by: Theron Voran <[email protected]> * Release 0.19.0 (#687) * Add extraLabels for CSI DaemonSet (#690) * Updated hashicorp/vault-csi-provider image to v1.0.0 (#689) * Fix unit test assertions (#693) * vault: bump image to 1.9.3 (#695) Signed-off-by: Lionel H <[email protected]> * changelog++ (#699) * change helm trigger branch from master to main (#700) * Add namespace to injector-leader-elector role, rolebinding and secret (#683) * allow to configure publishNotReadyAddresses on server services (#694) * Maintain pre-existing Mutating Webhook default values for Kubernetes 1.22 (#692) * Prepare default values for MutatingWebhookConfiguration #691 * Add values.yaml values to injector-mutating-webhook.yaml #691 * Duplicate and deprecate top-level webhook settings and put them in a webhook object * Made the new values default with the fallback to the old values.yaml * Fix _helpers.tpl to support both old and new webhook annotations * Add new tests and deprecate old ones for injector webhook configuration * Old tests now work with old values.yaml * Add all new fields showing that they have priority over old ones * Add deprecation note to injector.failurePolicy #691 * VAULT-571 Matching documented behavior and consul (#703) VAULT-571 Matching documented behavior and consul Consul's helm template defaults most of the enabled to the special value `"-"`, which means to inherit from global. This is what is implied should happen in Vault as well according to the documentation for the helm chart: > [global.enabled] The master enabled/disabled configuration. If this is > true, most components will be installed by default. If this is false, > no components will be installed by default and manually opting-in is > required, such as by setting server.enabled to true. (https://www.vaultproject.io/docs/platform/k8s/helm/configuration#enabled) We also simplified the chart logic using a few template helpers. Co-authored-by: Theron Voran <[email protected]> * Update k8s versions (#706) * tests: updating the four most recent k8s versions * bump oldest version to 1.16 * docs, Chart.yaml, and changelog for 1.14 -> 1.16 * Fix values schema to support config in YAML (#684) * Support policy/v1 disruptionbudget beyond kube 1.21 (#710) Issue #667, adding updates to the disruptionbudget to support new non beta spec beyond kube 1.21 * Remove unncessary template calls (#712) - As part of VAULT-571 / #703 in 7109159, a new vault.serverEnabled template was added (and included in vault.mode) Various templates were updated accordingly, but those that were already calling vault.mode had an additonal call to vault.serverEnabled made which was unnecessary Remove those * Issue 629: updated to allow customization of the CLUSTER_ADDR the same… (#709) * Issue #629 Updates to allow customization of the CLUSTER_ADDR and unit tests to go with it * Issue-#629 removing extra whitespace I added accidently. * Issue-#629 fixing extra whitespace added. * Update values.yaml Co-authored-by: Joaco Muleiro Beltran <[email protected]> * Issue #629 adding changelog Co-authored-by: Joaco Muleiro Beltran <[email protected]> * VAULT-5838 Update CSI provider to 1.1.0 (#721) * VAULT-5838 Update CSI provider to 1.1.0 * Update test/acceptance/csi.bats Co-authored-by: Theron Voran <[email protected]> Co-authored-by: Theron Voran <[email protected]> * VUALT-5838 Restore Secrets Store CSI driver to 1.0.0 (#722) 1.0.1+ seems to only support Kubernetes 1.19+, so we break support for 1.16 if we upgrade * Implement support for Topology Spread Constraints (#652) * Implemented support for topology spread constraints * Update values.yaml Co-authored-by: Ben Ash <[email protected]> * Update values.yaml Co-authored-by: Ben Ash <[email protected]> * Add topologySpreadConstraints to values schema * Implement injector deployment topology spread UTs * also remove string from the relevant schema types * Implement injector statefulset topology spread UTs * Implement injector HA statefulset topology UTs * Allow topologySpreadConstraints to be a string Co-authored-by: Ellis Tarn <[email protected]> Co-authored-by: Ben Ash <[email protected]> Co-authored-by: Christopher Swenson <[email protected]> * Update the changelog with changes from 614 and 652 (#723) * Update the changelog with changes from 614 and 652 * Update CHANGELOG.md Co-authored-by: Theron Voran <[email protected]> Co-authored-by: Theron Voran <[email protected]> * Prepare v0.20.0 release (#727) * Fix CSI acceptance tests (#728) * Update minimum required helm version in readme (#730) Co-authored-by: Tom Proctor <[email protected]> * Restore missing 'vault' service account (#737) Our tutorials rely on this service account being present even if we are using an external Vault. The `values.yaml` also states that external Vaults are expected to use this service account. For example, https://learn.hashicorp.com/tutorials/vault/kubernetes-external-vault?in=vault/kubernetes#install-the-vault-helm-chart-configured-to-address-an-external-vault * Set default object selector for webhooks to exclude injector itself (#736) Set default object selector for webhooks to exclude injector itself If `injector.failurePolicy` is set to `Fail`, there is a race condition where if the mutating webhook config is setup before the injector, then the injector can fail to start because it tries to inject itself. We can work around this by ignoring the injector pod in in the webhook by default. Thanks to @joeyslalom for the object selector to exclude the pod. Fixes https://github.com/hashicorp/vault-k8s/issues/258 * Prepare for release 0.20.1 (#739) Prepare for release 0.20.1 Improvements: * `vault-k8s` updated to 0.16.1 CHANGES: * `vault` service account is now created even if the server is set to disabled, as per before 0.20.0 [GH-737](https://github.com/hashicorp/vault-helm/pull/737) * Mutating webhook will no longer target the agent injector pod [GH-736](https://github.com/hashicorp/vault-helm/pull/736) Co-authored-by: Theron Voran <[email protected]> * Mention minimum helm version in changelog (#742) Also add a features section to 0.20.0 * Start testing against Kubernetes 1.24 (#744) Start testing against Kubernetes 1.24 Update .github/workflows/acceptance.yaml Remove skip csi Co-authored-by: Theron Voran <[email protected]> * Update .helmignore (#732) Review .helmignore file, ignore CI in chart * Set VAULT_ADDR env var for CSI Provider pods (#745) * Support to add annotations in injector serviceaccount (#753) * changelog++ (#757) * jira-sync: transition to "Closed" not "Close" (#758) * Add support for nodePort for active and standby services (#610) * Feat/adding pod and container security context (#750) Allow the injector's pod- and container-level securityContext to be fully specified by the user, via new options `injector.securityContext.pod` and `injector.securityContext.container` with more complete defaults. Deprecates `injector.uid` and `injector.gid`. If `injector.uid` or `injector.gid` are set by the user, the old pod securityContext settings will be used. Otherwise the new defaults and settings are used. Co-authored-by: Theron Voran <[email protected]> * Changelog and schema update for active/standby node port (#761) * Changelog and schema update for active/standby node port Follow-up to https://github.com/hashicorp/vault-helm/pull/610 * changelog++ and json schema update (#762) Changelog updates for #750, and json schema update. * Update jira sync (#768) * csi/server.statefulset: custom security context (#767) csi/server.statefulset: custom security context This adds flexibility to have custom pod template and container `securityContext` and preserves current default values and behavior. Fixes https://github.com/hashicorp/vault-helm/issues/663. This also is a way to address https://github.com/hashicorp/vault-helm/pull/599 so that people can specify, for example, the CSI to run in a privileged container for OpenShift. This is a follow-up to https://github.com/hashicorp/vault-helm/pull/750 and builds on the same principles. Side note: I am not able to run `helm schema-gen` since it is unmaintained and does not work with M1 Macs. * Prepare for 0.21.0 release (#771) Prepare for 0.21.0 release CHANGES: * `vault-k8s` updated to 0.17.0. (this) * `vault-csi-provider` updated to 1.2.0 (this) * `vault` updated to 1.11.2 (this) * Start testing against Kubernetes 1.24. [GH-744](https://github.com/hashicorp/vault-helm/pull/744) * Deprecated `injector.externalVaultAddr`. Added `global.externalVaultAddr`, which applies to both the Injector and the CSI Provider. [GH-745](https://github.com/hashicorp/vault-helm/pull/745) * CSI Provider pods now set the `VAULT_ADDR` environment variable to either the internal Vault service or the configured external address. [GH-745](https://github.com/hashicorp/vault-helm/pull/745) Features: * server: Add `server.statefulSet.securityContext` to override pod and container `securityContext`. [GH-767](https://github.com/hashicorp/vault-helm/pull/767) * csi: Add `csi.daemonSet.securityContext` to override pod and container `securityContext`. [GH-767](https://github.com/hashicorp/vault-helm/pull/767) * injector: Add `injector.securityContext` to override pod and container `securityContext`. [GH-750](https://github.com/hashicorp/vault-helm/pull/750) and [GH-767](https://github.com/hashicorp/vault-helm/pull/767) * Add `server.service.activeNodePort` and `server.service.standbyNodePort` to specify the `nodePort` for active and standby services. [GH-610](https://github.com/hashicorp/vault-helm/pull/610) * Support for setting annotations on the injector's serviceAccount [GH-753](https://github.com/hashicorp/vault-helm/pull/753) * DOC: Minor typos fixes (#669) Co-authored-by: Tom Proctor <[email protected]> * update values comments for server.securityContext (#778) Since container is empty for openshift. * CI: run acceptance tests on push to any (#781) * Add support for the Prometheus Operator (#772) support collecting Vault server metrics by deploying PrometheusOperator CustomResources. Co-authored-by: Sam Weston <[email protected]> Co-authored-by: Theron Voran <[email protected]> * Update vault-k8s to 1.0.0 (#784) Update vault-k8s to 1.0.0 Also update Kubernetes versions tested against, including adding 1.25 Update consul in tests for Kubernetes 1.25 support * Prepare for 0.22.0 release (#785) Prepare for 0.21.1 release * Update Vault to 1.11.3 * Explain this fork in the README * Adding support for LoadBalancerIP field in ServiceSpec * DATAGO-13861: Adding support for logrotate * DATAGO-13861: Adding audit log rotation and shipment to datdog * Fixing minor typos and removing extra lines * Explain this fork in the README * Adding support for LoadBalancerIP field in ServiceSpec * DATAGO-13861: Adding support for logrotate * DATAGO-13861: Adding audit log rotation and shipment to datdog * Fixing minor typos and removing extra lines * feat(DATAGO-27002): Upgrade vault to version 1.7.9 (#12) * Add objectSelector to webhookconfiguration (#456) * changelog++ * Add CSI secrets store provider (#461) * updating acceptance tests to k8s 1.17 on gke (#473) * changelog++ * Target vault-csi-provider release 0.1.0 (#475) * Update to 0.10.0 (#477) * Update to v0.10.0 * Fix typo * Add csi link in changelog * Add volumes and mounts support for CSI (#479) * Remove extraVolumes from CSI, add volumes and mounts * Add better example * changelog++ * Remove extra word in readme (#482) * fix csi helm deployment (#486) * fix serviceaccount and clusterrole name reference (full name) * add server.enabled option, align with documentation * add unit tests * update server.enabled behaviour to explicit true and update tests * changelog++ * add hostNetwork value to injector deployment (#471) * add hostNetwork value to injector deployment * adding unit tests * changelog++ * feat(ingress): Extra paths to prepend to the ingress host configuration for annotation based services (#460) Refs #361 * changelog++ * Add logLevel and logFormat values for Vault (#488) * Add logLevel and logFormat values for Vault * Add configurable tests * Update order of log levels * Update values.yaml * Update per review * Update test/unit/server-statefulset.bats Co-authored-by: Tom Proctor <[email protected]> * Update test/unit/server-statefulset.bats Co-authored-by: Tom Proctor <[email protected]> Co-authored-by: Tom Proctor <[email protected]> * changelog++ * Custom value of agent port (#489) * configure the agent port * add unit test * remove default * remove default * Update values.yaml Co-authored-by: Jason O'Donnell <[email protected]> Co-authored-by: Jason O'Donnell <[email protected]> * changelog++ * Add injector agent default overrides (#493) * Add injector agent default overrides * Update test/unit/injector-deployment.bats Co-authored-by: Theron Voran <[email protected]> * Update test/unit/injector-deployment.bats Co-authored-by: Theron Voran <[email protected]> * Update test/unit/injector-deployment.bats Co-authored-by: Theron Voran <[email protected]> Co-authored-by: Theron Voran <[email protected]> * changelog++ * [injector] Add port name in injector service (#495) * [injector] Add port name in injector service * [injector] Hardcore port to https * changelog++ * Fix injector unit test failing (#496) * Fix injector unit test failing * Add null check * Add default if unset for CI * Remove redundant logic (#434) * Update to v0.11.0 (#497) * Add container based tests documentation (#492) * update documentation with running unit tests using container * promote bats version to 1.3.0 * Update CONTRIBUTING.md Co-authored-by: Jason O'Donnell <[email protected]> * Update CONTRIBUTING.md Co-authored-by: Jason O'Donnell <[email protected]> Co-authored-by: Jason O'Donnell <[email protected]> * Set kubeVersion and added chart-verifier tests (#510) Set min kubeVersion in Chart.yaml to 1.14. Added a chart-verifier bats test, and configured to run it in CI. Some verification tests that haven't been addressed yet are skipped. * changelog++ * match kubeVersion on semver pre-releases (#512) Since clouds like GKE set their kubeVersion as a pre-release (e.g. v1.17.17-gke.6700) * Add ImagePullSecrets to CSI daemonset (#519) * changelog++ * changelog++ * fix CONTRIBUTING.md (#501) * updating to use new dedicated context and token (#515) * added values json schema (#513) Generated the schema using the helm schema-gen plugin, and added extra data types to fields that allow it, such as annotations, tolerations, enabled, etc. Enabled the "contains-value-schema" chart-verifier test. Co-authored-by: Jason O'Donnell <[email protected]> * changelog++ * [Issue-520] tolerations for csi-daemonset (#521) Co-authored-by: Theron Voran <[email protected]> * changelog++ * Add extraArgs value for CSI (#526) * changelog++ * add schema unit tests (#530) * Add UI targetPort option (#437) Use custom `targetPort` for UI service. See the usecase in https://github.com/hashicorp/vault-helm/issues/385#issuecomment-749560213 * changelog++ * Update to v0.12.0 (#532) * Update to v0.12.0 * Update values.schema.json * Fix schema types * revert image repo * Adding helm test for vault server (#531) Also adds acceptance test for 'helm test' and updates the chart-verifier version. * changelog++ * fix ui.serviceNodePort schema (#537) UI service nodePort defaults to null, but is set as an integer * changelog++ * change maxUnavailable to integer (#535) change maxUnavailable from `null` to `integer` to enable upgrade from 0.11.0 to 0.12.0 when using the specific variable. * Also allow null value Co-authored-by: Theron Voran <[email protected]> * add test for server.ha.disruptionBudget.maxUnavailable Co-authored-by: Theron Voran <[email protected]> * changelog++ * use vault-helm-test:0.2.0 (#543) * Added webhook-certs volume mount to sidecar injector (#545) * Removed webhook-certs volume mount from leader-elector container * Added test: injector deployment manual TLS adds volume mount * changelog++ * Adding server.enterpriseLicense (#547) Sets up a vault-enterprise license for autoloading on vault startup. Mounts an existing secret to /vault/license and sets VAULT_LICENSE_PATH appropriately. * changelog++ * Add openshift overrides (#549) Adds default overrides for OpenShift (values.openshift.yaml) and uses them in the chart-verifier tests. * changelog++ * Update to v0.13.0 (#554) * Explain this fork in the README * Adding support for LoadBalancerIP field in ServiceSpec * DATAGO-13861: Adding support for logrotate * DATAGO-13861: Adding audit log rotation and shipment to datdog * Fixing minor typos and removing extra lines * DATAGO-13861: Adding support for logrotate * DATAGO-13861: Adding audit log rotation and shipment to datdog * Fixing minor typos and removing extra lines * feat(DATAGO-27002): Upgrade to 1.7.9 * chore(DATAGO-27002): Fix doc issue Co-authored-by: guru1306 <[email protected]> Co-authored-by: Jason O'Donnell <[email protected]> Co-authored-by: Tom Proctor <[email protected]> Co-authored-by: Theron Voran <[email protected]> Co-authored-by: Paul <[email protected]> Co-authored-by: Arie Lev <[email protected]> Co-authored-by: Paul Witt <[email protected]> Co-authored-by: Sam Marshall <[email protected]> Co-authored-by: Hamza ZOUHAIR <[email protected]> Co-authored-by: Javier Criado Marcos <[email protected]> Co-authored-by: mehmetsalgar <[email protected]> Co-authored-by: Sarah Thompson <[email protected]> Co-authored-by: Iñigo Horcajo <[email protected]> Co-authored-by: Rule88 <[email protected]> Co-authored-by: Ricardo Gândara Pinto <[email protected]> Co-authored-by: Julian Setiawan <[email protected]> Co-authored-by: marcboudreau <[email protected]> Co-authored-by: Hadie Laham <[email protected]> * fix: deploy_local.sh error with file * minor changes * Adding support for LoadBalancerIP field in ServiceSpec * DATAGO-13861: Adding support for logrotate * DATAGO-13861: Adding audit log rotation and shipment to datdog * Fixing minor typos and removing extra lines * DATAGO-13861: Adding support for logrotate * DATAGO-13861: Adding audit log rotation and shipment to datdog * Fixing minor typos and removing extra lines * feat(DATAGO-27002): Upgrade vault to version 1.7.9 (#12) * Add objectSelector to webhookconfiguration (#456) * changelog++ * Add CSI secrets store provider (#461) * updating acceptance tests to k8s 1.17 on gke (#473) * changelog++ * Target vault-csi-provider release 0.1.0 (#475) * Update to 0.10.0 (#477) * Update to v0.10.0 * Fix typo * Add csi link in changelog * Add volumes and mounts support for CSI (#479) * Remove extraVolumes from CSI, add volumes and mounts * Add better example * changelog++ * Remove extra word in readme (#482) * fix csi helm deployment (#486) * fix serviceaccount and clusterrole name reference (full name) * add server.enabled option, align with documentation * add unit tests * update server.enabled behaviour to explicit true and update tests * changelog++ * add hostNetwork value to injector deployment (#471) * add hostNetwork value to injector deployment * adding unit tests * changelog++ * feat(ingress): Extra paths to prepend to the ingress host configuration for annotation based services (#460) Refs #361 * changelog++ * Add logLevel and logFormat values for Vault (#488) * Add logLevel and logFormat values for Vault * Add configurable tests * Update order of log levels * Update values.yaml * Update per review * Update test/unit/server-statefulset.bats Co-authored-by: Tom Proctor <[email protected]> * Update test/unit/server-statefulset.bats Co-authored-by: Tom Proctor <[email protected]> Co-authored-by: Tom Proctor <[email protected]> * changelog++ * Custom value of agent port (#489) * configure the agent port * add unit test * remove default * remove default * Update values.yaml Co-authored-by: Jason O'Donnell <[email protected]> Co-authored-by: Jason O'Donnell <[email protected]> * changelog++ * Add injector agent default overrides (#493) * Add injector agent default overrides * Update test/unit/injector-deployment.bats Co-authored-by: Theron Voran <[email protected]> * Update test/unit/injector-deployment.bats Co-authored-by: Theron Voran <[email protected]> * Update test/unit/injector-deployment.bats Co-authored-by: Theron Voran <[email protected]> Co-authored-by: Theron Voran <[email protected]> * changelog++ * [injector] Add port name in injector service (#495) * [injector] Add port name in injector service * [injector] Hardcore port to https * changelog++ * Fix injector unit test failing (#496) * Fix injector unit test failing * Add null check * Add default if unset for CI * Remove redundant logic (#434) * Update to v0.11.0 (#497) * Add container based tests documentation (#492) * update documentation with running unit tests using container * promote bats version to 1.3.0 * Update CONTRIBUTING.md Co-authored-by: Jason O'Donnell <[email protected]> * Update CONTRIBUTING.md Co-authored-by: Jason O'Donnell <[email protected]> Co-authored-by: Jason O'Donnell <[email protected]> * Set kubeVersion and added chart-verifier tests (#510) Set min kubeVersion in Chart.yaml to 1.14. Added a chart-verifier bats test, and configured to run it in CI. Some verification tests that haven't been addressed yet are skipped. * changelog++ * match kubeVersion on semver pre-releases (#512) Since clouds like GKE set their kubeVersion as a pre-release (e.g. v1.17.17-gke.6700) * Add ImagePullSecrets to CSI daemonset (#519) * changelog++ * changelog++ * fix CONTRIBUTING.md (#501) * updating to use new dedicated context and token (#515) * added values json schema (#513) Generated the schema using the helm schema-gen plugin, and added extra data types to fields that allow it, such as annotations, tolerations, enabled, etc. Enabled the "contains-value-schema" chart-verifier test. Co-authored-by: Jason O'Donnell <[email protected]> * changelog++ * [Issue-520] tolerations for csi-daemonset (#521) Co-authored-by: Theron Voran <[email protected]> * changelog++ * Add extraArgs value for CSI (#526) * changelog++ * add schema unit tests (#530) * Add UI targetPort option (#437) Use custom `targetPort` for UI service. See the usecase in https://github.com/hashicorp/vault-helm/issues/385#issuecomment-749560213 * changelog++ * Update to v0.12.0 (#532) * Update to v0.12.0 * Update values.schema.json * Fix schema types * revert image repo * Adding helm test for vault server (#531) Also adds acceptance test for 'helm test' and updates the chart-verifier version. * changelog++ * fix ui.serviceNodePort schema (#537) UI service nodePort defaults to null, but is set as an integer * changelog++ * change maxUnavailable to integer (#535) change maxUnavailable from `null` to `integer` to enable upgrade from 0.11.0 to 0.12.0 when using the specific variable. * Also allow null value Co-authored-by: Theron Voran <[email protected]> * add test for server.ha.disruptionBudget.maxUnavailable Co-authored-by: Theron Voran <[email protected]> * changelog++ * use vault-helm-test:0.2.0 (#543) * Added webhook-certs volume mount to sidecar injector (#545) * Removed webhook-certs volume mount from leader-elector container * Added test: injector deployment manual TLS adds volume mount * changelog++ * Adding server.enterpriseLicense (#547) Sets up a vault-enterprise license for autoloading on vault startup. Mounts an existing secret to /vault/license and sets VAULT_LICENSE_PATH appropriately. * changelog++ * Add openshift overrides (#549) Adds default overrides for OpenShift (values.openshift.yaml) and uses them in the chart-verifier tests. * changelog++ * Update to v0.13.0 (#554) * Explain this fork in the README * Adding support for LoadBalancerIP field in ServiceSpec * DATAGO-13861: Adding support for logrotate * DATAGO-13861: Adding audit log rotation and shipment to datdog * Fixing minor typos and removing extra lines * DATAGO-13861: Adding support for logrotate * DATAGO-13861: Adding audit log rotation and shipment to datdog * Fixing minor typos and removing extra lines * feat(DATAGO-27002): Upgrade to 1.7.9 * chore(DATAGO-27002): Fix doc issue Co-authored-by: guru1306 <[email protected]> Co-authored-by: Jason O'Donnell <[email protected]> Co-authored-by: Tom Proctor <[email protected]> Co-authored-by: Theron Voran <[email protected]> Co-authored-by: Paul <[email protected]> Co-authored-by: Arie Lev <[email protected]> Co-authored-by: Paul Witt <[email protected]> Co-authored-by: Sam Marshall <[email protected]> Co-authored-by: Hamza ZOUHAIR <[email protected]> Co-authored-by: Javier Criado Marcos <[email protected]> Co-authored-by: mehmetsalgar <[email protected]> Co-authored-by: Sarah Thompson <[email protected]> Co-authored-by: Iñigo Horcajo <[email protected]> Co-authored-by: Rule88 <[email protected]> Co-authored-by: Ricardo Gândara Pinto <[email protected]> Co-authored-by: Julian Setiawan <[email protected]> Co-authored-by: marcboudreau <[email protected]> Co-authored-by: Hadie Laham <[email protected]> * Datago 30304/upgrading vault to 1.9.2 (#14) * add staticSecretRenderInterval to injector (#621) * make staticSecretRenderInterval default to empty string * update values schema to add staticSecretRenderInterval * add test for default value * adding changelog entry Co-authored-by: Theron Voran <[email protected]> * Update jira action (#644) * No longer check for Vault team membership * Tweak jira states and search parameters * remove support for the leader-elector container (#649) * vault-helm 0.18.0 release (#650) * Run CI tests in github workflows (#657) Ports the bats unit, chart-verifier, and bats acceptance tests to use github workflows and actions. The acceptance tests run using kind, and run for multiple k8s versions, on pushes to the main branch. Adds a SKIP_CSI env check in the CSI acceptance test, set in the workflow if K8s version is less than 1.16. Adds kubeAdmConfigPatches to the kind config to allow testing the CSI provider on K8s versions prior to 1.21. Updates the Secrets Store CSI driver to 1.0.0 in tests. Makes the HA Vault tests more robust by waiting for all consul client pods to be Ready, and waits with a timeout for Vault to start responding as sealed (since the tests on GitHub runners were often failing at that point). Co-authored-by: Tom Proctor <[email protected]> * Configurable PodDisruptionBudget for Injector (#653) * Fix spelling error in server disruptionbudget test (#654) * Make terminationGracePeriodSeconds configurable (#659) Make terminationGracePeriodSeconds configurable for server pod * injector: ability to set deployment update strategy (continued) (#661) Co-authored-by: Jason Hancock <[email protected]> * csi: ability to set priorityClassName for csi daemonset pods (#670) * Fixed a small typo (#672) * Disable unit and acceptance tests in CircleCI (#675) * update CONTRIBUTING.md (#677) Link to the discuss forum instead of the old google group and irc channel. Add info about the CLA. * add namespace support for openshift route (#679) * Add volumes and env vars to helm hook test pod (#673) * Fix test typo * Add basic server-test Pod tests - This covers all existing functionality that matches what's present in server-statefulset.bats * Fix server-test helm hook Pod rendering - Properly adhere to the global.enabled flag and the presence of the injector.externalVaultAddr setting, the same way that the servers StatefulSet behaves * Add volumes and env vars to helm hook test pod - Uses the same extraEnvironmentVars, volumes and volumeMounts set on the server statefulset to configure the Vault server test pod used by the helm test hook - This is necessary in situations where TLS is configured, but the certificates are not affiliated with the k8s CA / part of k8s PKI - Fixes GH-665 * allow injection of TLS config for OpenShift routes (#686) * Add some tests on top of #396 * convert server-route.yaml to unix newlines * changelog Co-authored-by: André Becker <[email protected]> Co-authored-by: Theron Voran <[email protected]> * Release 0.19.0 (#687) * Explain this fork in the README * Adding support for LoadBalancerIP field in ServiceSpec * DATAGO-13861: Adding support for logrotate * DATAGO-13861: Adding audit log rotation and shipment to datdog * Fixing minor typos and removing extra lines * Update to 0.4.0 * Explain this fork in the README * Adding support for LoadBalancerIP field in ServiceSpec * DATAGO-13861: Adding support for logrotate * DATAGO-13861: Adding audit log rotation and shipment to datdog * Fixing minor typos and removing extra lines * feat(DATAGO-27002): Upgrade vault to version 1.7.9 (#12) * Add objectSelector to webhookconfiguration (#456) * changelog++ * Add CSI secrets store provider (#461) * updating acceptance tests to k8s 1.17 on gke (#473) * changelog++ * Target vault-csi-provider release 0.1.0 (#475) * Update to 0.10.0 (#477) * Update to v0.10.0 * Fix typo * Add csi link in changelog * Add volumes and mounts support for CSI (#479) * Remove extraVolumes from CSI, add volumes and mounts * Add better example * changelog++ * Remove extra word in readme (#482) * fix csi helm deployment (#486) * fix serviceaccount and clusterrole name reference (full name) * add server.enabled option, align with documentation * add unit tests * update server.enabled behaviour to explicit true and update tests * changelog++ * add hostNetwork value to injector deployment (#471) * add hostNetwork value to injector deployment * adding unit tests * changelog++ * feat(ingress): Extra paths to prepend to the ingress host configuration for annotation based services (#460) Refs #361 * changelog++ * Add logLevel and logFormat values for Vault (#488) * Add logLevel and logFormat values for Vault * Add configurable tests * Update order of log levels * Update values.yaml * Update per review * Update test/unit/server-statefulset.bats Co-authored-by: Tom Proctor <[email protected]> * Update test/unit/server-statefulset.bats Co-authored-by: Tom Proctor <[email protected]> Co-authored-by: Tom Proctor <[email protected]> * changelog++ * Custom value of agent port (#489) * configure the agent port * add unit test * remove default * remove default * Update values.yaml Co-authored-by: Jason O'Donnell <[email protected]> Co-authored-by: Jason O'Donnell <[email protected]> * changelog++ * Add injector agent default overrides (#493) * Add injector agent default overrides * Update test/unit/injector-deployment.bats Co-authored-by: Theron Voran <[email protected]> * Update test/unit/injector-deployment.bats Co-authored-by: Theron Voran <[email protected]> * Update test/unit/injector-deployment.bats Co-authored-by: Theron Voran <[email protected]> Co-authored-by: Theron Voran <[email protected]> * changelog++ * [injector] Add port name in injector service (#495) * [injector] Add port name in injector service * [injector] Hardcore port to https * changelog++ * Fix injector unit test failing (#496) * Fix injector unit test failing * Add null check * Add default if unset for CI * Remove redundant logic (#434) * Update to v0.11.0 (#497) * Add container based tests documentation (#492) * update documentation with running unit tests using container * promote bats version to 1.3.0 * Update CONTRIBUTING.md Co-authored-by: Jason O'Donnell <[email protected]> * Update CONTRIBUTING.md Co-authored-by: Jason O'Donnell <[email protected]> Co-authored-by: Jason O'Donnell <[email protected]> * Set kubeVersion and added chart-verifier tests (#510) Set min kubeVersion in Chart.yaml to 1.14. Added a chart-verifier bats test, and configured to run it in CI. Some verification tests that haven't been addressed yet are skipped. * changelog++ * match kubeVersion on semver pre-releases (#512) Since clouds like GKE set their kubeVersion as a pre-release (e.g. v1.17.17-gke.6700) * Add ImagePullSecrets to CSI daemonset (#519) * changelog++ * changelog++ * fix CONTRIBUTING.md (#501) * updating to use new dedicated context and token (#515) * added values json schema (#513) Generated the schema using the helm schema-gen plugin, and added extra data types to fields that allow it, such as annotations, tolerations, enabled, etc. Enabled the "contains-value-schema" chart-verifier test. Co-authored-by: Jason O'Donnell <[email protected]> * changelog++ * [Issue-520] tolerations for csi-daemonset (#521) Co-authored-by: Theron Voran <[email protected]> * changelog++ * Add extraArgs value for CSI (#526) * changelog++ * add schema unit tests (#530) * Add UI targetPort option (#437) Use custom `targetPort` for UI service. See the usecase in https://github.com/hashicorp/vault-helm/issues/385#issuecomment-749560213 * changelog++ * Update to v0.12.0 (#532) * Update to v0.12.0 * Update values.schema.json * Fix schema types * revert image repo * Adding helm test for vault server (#531) Also adds acceptance test for 'helm test' and updates the chart-verifier version. * changelog++ * fix ui.serviceNodePort schema (#537) UI service nodePort defaults to null, but is set as an integer * changelog++ * change maxUnavailable to integer (#535) change maxUnavailable from `null` to `integer` to enable upgrade from 0.11.0 to 0.12.0 when using the specific variable. * Also allow null value Co-authored-by: Theron Voran <[email protected]> * add test for server.ha.disruptionBudget.maxUnavailable Co-authored-by: Theron Voran <[email protected]> * changelog++ * use vault-helm-test:0.2.0 (#543) * Added webhook-certs volume mount to sidecar injector (#545) * Removed webhook-certs volume mount from leader-elector container * Added test: injector deployment manual TLS adds volume mount * changelog++ * Adding server.enterpriseLicense (#547) Sets up a vault-enterprise license for autoloading on vault startup. Mounts an existing secret to /vault/license and sets VAULT_LICENSE_PATH appropriately. * changelog++ * Add openshift overrides (#549) Adds default overrides for OpenShift (values.openshift.yaml) and uses them in the chart-verifier tests. * changelog++ * Update to v0.13.0 (#554) * Explain this fork in the README * Adding support for LoadBalancerIP field in ServiceSpec * DATAGO-13861: Adding support for logrotate * DATAGO-13861: Adding audit log rotation and shipment to datdog * Fixing minor typos and removing extra lines * DATAGO-13861: Adding support for logrotate * DATAGO-13861: Adding audit log rotation and shipment to datdog * Fixing minor typos and removing extra lines * feat(DATAGO-27002): Upgrade to 1.7.9 * chore(DATAGO-27002): Fix doc issue Co-authored-by: guru1306 <[email protected]> Co-authored-by: Jason O'Donnell <[email protected]> Co-authored-by: Tom Proctor <[email protected]> Co-authored-by: Theron Voran <[email protected]> Co-authored-by: Paul <[email protected]> Co-authored-by: Arie Lev <[email protected]> Co-authored-by: Paul Witt <[email protected]> Co-authored-by: Sam Marshall <[email protected]> Co-authored-by: Hamza ZOUHAIR <[email protected]> Co-authored-by: Javier Criado Marcos <[email protected]> Co-authored-by: mehmetsalgar <[email protected]> Co-authored-by: Sarah Thompson <[email protected]> Co-authored-by: Iñigo Horcajo <[email protected]> Co-authored-by: Rule88 <[email protected]> Co-authored-by: Ricardo Gândara Pinto <[email protected]> Co-authored-by: Julian Setiawan <[email protected]> Co-authored-by: marcboudreau <[email protected]> Co-authored-by: Hadie Laham <[email protected]> * fix: deploy_local.sh error with file * minor changes * Adding support for LoadBalancerIP field in ServiceSpec * DATAGO-13861: Adding support for logrotate * DATAGO-13861: Adding audit log rotation and shipment to datdog * Fixing minor typos and removing extra lines * DATAGO-13861: Adding support for logrotate * DATAGO-13861: Adding audit log rotation and shipment to datdog * Fixing minor typos and removing extra lines * feat(DATAGO-27002): Upgrade vault to version 1.7.9 (#12) * Add objectSelector to webhookconfiguration (#456) * changelog++ * Add CSI secrets store provider (#461) * updating acceptance tests to k8s 1.17 on gke (#473) * changelog++ * Target vault-csi-provider release 0.1.0 (#475) * Update to 0.10.0 (#477) * Update to v0.10.0 * Fix typo * Add csi link in changelog * Add volumes and mounts support for CSI (#479) * Remove extraVolumes from CSI, add volumes and mounts * Add better example * changelog++ * Remove extra word in readme (#482) * fix csi helm deployment (#486) * fix serviceaccount and clusterrole name reference (full name) * add server.enabled option, align with documentation * add unit tests * update server.enabled behaviour to explicit true and update tests * changelog++ * add hostNetwork value to injector deployment (#471) * add hostNetwork value to injector deployment * adding unit tests * changelog++ * feat(ingress): Extra paths to prepend to the ingress host configuration for annotation based services (#460) Refs #361 * changelog++ * Add logLevel and logFormat values for Vault (#488) * Add logLevel and logFormat values for Vault * Add configurable tests * Update order of log levels * Update values.yaml * Update per review * Update test/unit/server-statefulset.bats Co-authored-by: Tom Proctor <[email protected]> * Update test/unit/server-statefulset.bats Co-authored-by: Tom Proctor <[email protected]> Co-authored-by: Tom Proctor <[email protected]> * changelog++ * Custom value of agent port (#489) * configure the agent port * add unit test * remove default * remove default * Update values.yaml Co-authored-by: Jason O'Donnell <[email protected]> Co-authored-by: Jason O'Donnell <[email protected]> * changelog++ * Add injector agent default overrides (#493) * Add injector agent default overrides * Update test/unit/injector-deployment.bats Co-authored-by: Theron Voran <[email protected]> * Update test/unit/injector-deployment.bats Co-authored-by: Theron Voran <[email protected]> * Update test/unit/injector-deployment.bats Co-authored-by: Theron Voran <[email protected]> Co-authored-by: Theron Voran <[email protected]> * changelog++ * [injector] Add port name in injector service (#495) * [injector] Add port name in injector service * [injector] Hardcore port to https * changelog++ * Fix injector unit test failing (#496) * Fix injector unit test failing * Add null check * Add default if unset for CI * Remove redundant logic (#434) * Update to v0.11.0 (#497) * Add container based tests documentation (#492) * update documentation with running unit tests using container * promote bats version to 1.3.0 * Update CONTRIBUTING.md Co-authored-by: Jason O'Donnell <[email protected]> * Update CONTRIBUTING.md Co-authored-by: Jason O'Donnell <[email protected]> Co-authored-by: Jason O'Donnell <[email protected]> * Set kubeVersion and added chart-verifier tests (#510) Set min kubeVersion in Chart.yaml to 1.14. Added a chart-verifier bats test, and configured to run it in CI. Some verification tests that haven't been addressed yet are skipped. * changelog++ * match kubeVersion on semver pre-releases (#512) Since clouds like GKE set their kubeVersion as a pre-release (e.g. v1.17.17-gke.6700) * Add ImagePullSecrets to CSI daemonset (#519) * changelog++ * changelog++ * fix CONTRIBUTING.md (#501) * updating to use new dedicated context and token (#515) * added values json schema (#513) Generated the schema using the helm schema-gen plugin, and added extra data types to fields that allow it, such as annotations, tolerations, enabled, etc. Enabled the "contains-value-schema" chart-verifier test. Co-authored-by: Jason O'Donnell <[email protected]> * changelog++ * [Issue-520] tolerations for csi-daemonset (#521) Co-authored-by: Theron Voran <[email protected]> * changelog++ * Add extraArgs value for CSI (#526) * changelog++ * add schema unit tests (#530) * Add UI targetPort option (#437) Use custom `targetPort` for UI service. See the usecase in https://github.com/hashicorp/vault-helm/issues/385#issuecomment-749560213 * changelog++ * Update to v0.12.0 (#532) * Update to v0.12.0 * Update values.schema.json * Fix schema types * revert image repo * Adding helm test for vault server (#531) Also adds acceptance test for 'helm test' and updates the chart-verifier version. * changelog++ * fix ui.serviceNodePort schema (#537) UI service nodePort defaults to null, but is set as an integer * changelog++ * change maxUnavailable to integer (#535) change maxUnavailable from `null` to `integer` to enable upgrade from 0.11.0 to 0.12.0 when using the specific variable. * Also allow null value Co-authored-by: Theron Voran <[email protected]> * add test for server.ha.disruptionBudget.maxUnavailable Co-authored-by: Theron Voran <[email protected]> * changelog++ * use vault-helm-test:0.2.0 (#543) * Added webhook-certs volume mount to sidecar injector (#545) * Removed webhook-certs volume mount from leader-elector container * Added test: injector deployment manual TLS adds volume mount * changelog++ * Adding server.enterpriseLicense (#547) Sets up a vault-enterprise license for autoloading on vault startup. Mounts an existing secret to /vault/license and sets VAULT_LICENSE_PATH appropriately. * changelog++ * Add openshift overrides (#549) Adds default overrides for OpenShift (values.openshift.yaml) and uses them in the chart-verifier tests. * changelog++ * Update to v0.13.0 (#554) * Explain this fork in the README * Adding support for LoadBalancerIP field in ServiceSpec * DATAGO-13861: Adding support for logrotate * DATAGO-13861: Adding audit log rotation and shipment to datdog * Fixing minor typos and removing extra lines * DATAGO-13861: Adding support for logrotate * DATAGO-13861: Adding audit log rotation and shipment to datdog * Fixing minor typos and removing extra lines * feat(DATAGO-27002): Upgrade to 1.7.9 * chore(DATAGO-27002): Fix doc issue Co-authored-by: guru1306 <[email protected]> Co-authored-by: Jason O'Donnell <[email protected]> Co-authored-by: Tom Proctor <[email protected]> Co-authored-by: Theron Voran <[email protected]> Co-authored-by: Paul <[email protected]> Co-authored-by: Arie Lev <[email protected]> Co-authored-by: Paul Witt <[email protected]> Co-authored-by: Sam Marshall <[email protected]> Co-authored-by: Hamza ZOUHAIR <[email protected]> Co-authored-by: Javier Criado Marcos <[email protected]> Co-authored-by: mehmetsalgar <[email protected]> Co-authored-by: Sarah Thompson <[email protected]> Co-authored-by: Iñigo Horcajo <[email protected]> Co-authored-by: Rule88 <[email protected]> Co-authored-by: Ricardo Gândara Pinto <[email protected]> Co-authored-by: Julian Setiawan <[email protected]> Co-authored-by: marcboudreau <[email protected]> Co-authored-by: Hadie Laham <[email protected]> * changed value to use tag 1.9.6 Co-authored-by: Kaito Ii <[email protected]> Co-authored-by: Theron Voran <[email protected]> Co-authored-by: Tom Proctor <[email protected]> Co-authored-by: Eric Miller <[email protected]> Co-authored-by: Takumi Sue <[email protected]> Co-authored-by: Jason Hancock <[email protected]> Co-authored-by: Vadim Grek <[email protected]> Co-authored-by: nikstur <[email protected]> Co-authored-by: Jacob Mammoliti <[email protected]> Co-authored-by: Ethan J. Brown <[email protected]> Co-authored-by: Michele Baldessari <[email protected]> Co-authored-by: André Becker <[email protected]> Co-authored-by: Julian Setiawan <[email protected]> Co-authored-by: marcboudreau <[email protected]> Co-authored-by: Hadie Laham <[email protected]> Co-authored-by: Jason O'Donnell <[email protected]> Co-authored-by: Subhrajit Nag <[email protected]> Co-authored-by: guru1306 <[email protected]> Co-authored-by: Paul <[email protected]> Co-authored-by: Arie Lev <[email protected]> Co-authored-by: Paul Witt <[email protected]> Co-authored-by: Sam Marshall <[email protected]> Co-authored-by: Hamza ZOUHAIR <[email protected]> Co-authored-by: Javier Criado Marcos <[email protected]> Co-authored-by: mehmetsalgar <[email protected]> Co-authored-by: Sarah Thompson <[email protected]> Co-authored-by: Iñigo Horcajo <[email protected]> Co-authored-by: Rule88 <[email protected]> Co-authored-by: Ricardo Gândara Pinto <[email protected]> Co-authored-by: adhish2001 <[email protected]> * feat(DATAGO-30305): Upgrade vault server to 1.10.x (#16) * add staticSecretRenderInterval to injector (#621) * make staticSecretRenderInterval default to empty string * update values schema to add staticSecretRenderInterval * add test for default value * adding changelog entry Co-authored-by: Theron Voran <[email protected]> * Update jira action (#644) * No longer check for Vault team membership * Tweak jira states and search parameters * remove support for the leader-elector container (#649) * vault-helm 0.18.0 release (#650) * Run CI tests in github workflows (#657) Ports the bats unit, chart-verifier, and bats acceptance tests to use github workflows and actions. The acceptance tests run using kind, and run for multiple k8s versions, on pushes to the main branch. Adds a SKIP_CSI env check in the CSI acceptance test, set in the workflow if K8s version is less than 1.16. Adds kubeAdmConfigPatches to the kind config to allow testing the CSI provider on K8s versions prior to 1.21. Updates the Secrets Store CSI driver to 1.0.0 in tests. Makes the HA Vault tests more robust by waiting for all consul client pods to be Ready, and waits with a timeout for Vault to start responding as sealed (since the tests on GitHub runners were often failing at that point). Co-authored-by: Tom Proctor <[email protected]> * Configurable PodDisruptionBudget for Injector (#653) * Fix spelling error in server disruptionbudget test (#654) * Make terminationGracePeriodSeconds configurable (#659) Make terminationGracePeriodSeconds configurable for server pod * injector: ability to set deployment update strategy (continued) (#661) Co-authored-by: Jason Hancock <[email protected]> * csi: ability to set priorityClassName for csi daemonset pods (#670) * Fixed a small typo (#672) * Disable unit and acceptance tests in CircleCI (#675) * update CONTRIBUTING.md (#677) Link to the discuss forum instead of the old google group and irc channel. Add info about the CLA. * add namespace support for openshift route (#679) * Add volumes and env vars to helm hook test pod (#673) * Fix test typo * Add basic server-test Pod tests - This covers all existing functionality that matches what's present in server-statefulset.bats * Fix server-test helm hook Pod rendering - Properly adhere to the global.enabled flag and the presence of the injector.externalVaultAddr setting, the same way that the servers StatefulSet behaves * Add volumes and env vars to helm hook test pod - Uses the same extraEnvironmentVars, volumes and volumeMounts set on the server statefulset to configure the Vault server test pod used by the helm test hook - This is necessary in situations where TLS is configured, but the certificates are not affiliated with the k8s CA / part of k8s PKI - Fixes GH-665 * allow injection of TLS config for OpenShift routes (#686) * Add some tests on top of #396 * convert server-route.yaml to unix newlines * changelog Co-authored-by: André Becker <[email protected]> Co-authored-by: Theron Voran <[email protected]> * Release 0.19.0 (#687) * Add extraLabels for CSI DaemonSet (#690) * Updated hashicorp/vault-csi-provider image to v1.0.0 (#689) * Fix unit test assertions (#693) * vault: bump image to 1.9.3 (#695) Signed-off-by: Lionel H <[email protected]> * changelog++ (#699) * change helm trigger branch from master to main (#700) * Add namespace to injector-leader-elector role, rolebinding and secret (#683) * allow to configure publishNotReadyAddresses on server services (#694) * Maintain pre-existing Mutating Webhook default values for Kubernetes 1.22 (#692) * Prepare default values for MutatingWebhookConfiguration #691 * Add values.yaml values to injector-mutating-webhook.yaml #691 * Duplicate and deprecate top-level webhook settings and put them in a webhook object * Made the new values default with the fallback to the old values.yaml * Fix _helpers.tpl to support both old and new webhook annotations * Add new tests and deprecate old ones for injector webhook configuration * Old tests now work with old values.yaml * Add all new fields showing that they have priority over old ones * Add deprecation note to injector.failurePolicy #691 * VAULT-571 Matching documented behavior and consul (#703) VAULT-571 Matching documented behavior and consul Consul's helm template defaults most of the enabled to the special value `"-"`, which means to inherit from global. This is what is implied should happen in Vault as well according to the documentation for the helm chart: > [global.enabled] The master enabled/disabled configuration. If this is > true, most components will be installed by default. If this is false, > no components will be installed by default and manually opting-in is > required, such as by setting server.enabled to true. (https://www.vaultproject.io/docs/platform/k8s/helm/configuration#enabled) We also simplified the chart logic using a few template helpers. Co-authored-by: Theron Voran <[email protected]> * Update k8s versions (#706) * tests: updating the four most recent k8s versions * bump oldest version to 1.16 * docs, Chart.yaml, and changelog for 1.14 -> 1.16 * Fix values schema to support config in YAML (#684) * Support policy/v1 disruptionbudget beyond kube 1.21 (#710) Issue #667, adding updates to the disruptionbudget to support new non beta spec beyond kube 1.21 * Remove unncessary template calls (#712) - As part of VAULT-571 / #703 in 7109159, a new vault.serverEnabled template was added (and included in vault.mode) Various templates were updated accordingly, but those that were already calling vault.mode had an additonal call to vault.serverEnabled made which was unnecessary Remove those * Issue 629: updated to allow customization of the CLUSTER_ADDR the same… (#709) * Issue #629 Updates to allow customization of the CLUSTER_ADDR and unit tests to go with it * Issue-#629 removing extra whitespace I added accidently. * Issue-#629 fixing extra whitespace added. * Update values.yaml Co-authored-by: Joaco Muleiro Beltran <[email protected]> * Issue #629 adding changelog Co-authored-by: Joaco Muleiro Beltran <[email protected]> * VAULT-5838 Update CSI provider to 1.1.0 (#721) * VAULT-5838 Update CSI provider to 1.1.0 * Update test/acceptance/csi.bats Co-authored-by: Theron Voran <[email protected]> Co-authored-by: Theron Voran <[email protected]> * VUALT-5838 Restore Secrets Store CSI driver to 1.0.0 (#722) 1.0.1+ seems to only support Kubernetes 1.19+, so we break support for 1.16 if we upgrade * Implement support for Topology Spread Constraints (#652) * Implemented support for topology spread constraints * Update values.yaml Co-authored-by: Ben Ash <[email protected]> * Update values.yaml Co-authored-by: Ben Ash <[email protected]> * Add topologySpreadConstraints to values schema * Implement injector deployment topology spread UTs * also remove string from the relevant schema types * Implement injector statefulset topology spread UTs * Implement injector HA statefulset topology UTs * Allow topologySpreadConstraints to be a string Co-authored-by: Ellis Tarn <[email protected]> Co-authored-by: Ben Ash <[email protected]> Co-authored-by: Christopher Swenson <[email protected]> * Update the changelog with changes from 614 and 652 (#723) * Update the changelog with changes from 614 and 652 * Update CHANGELOG.md Co-authored-by: Theron Voran <[email protected]> Co-authored-by: Theron Voran <[email protected]> * Prepare v0.20.0 release (#727) --------- Signed-off-by: Lionel H <[email protected]> Co-authored-by: Kaito Ii <[email protected]> Co-authored-by: Theron Voran <[email protected]> Co-authored-by: Tom Proctor <[email protected]> Co-authored-by: Eric Miller <[email protected]> Co-authored-by: Takumi Sue <[email protected]> Co-authored-by: Jason Hancock <[email protected]> Co-authored-by: Vadim Grek <[email protected]> Co-authored-by: nikstur <[email protected]> Co-authored-by: Jacob Mammoliti <[email protected]> Co-authored-by: Ethan J. Brown <[email protected]> Co-authored-by: Michele Baldessari <[email protected]> Co-authored-by: André Becker <[email protected]> Co-authored-by: Michael Schuett <[email protected]> Co-authored-by: Troy Fluegge <[email protected]> Co-authored-by: lion24 <[email protected]> Co-authored-by: Alvin Huang <[email protected]> Co-authored-by: Christian <[email protected]> Co-authored-by: Viacheslav Vasilyev <[email protected]> Co-authored-by: Remco Buddelmeijer <[email protected]> Co-authored-by: Christopher Swenson <[email protected]> Co-authored-by: gw0 <[email protected]> Co-authored-by: Stephen Herd <[email protected]> Co-authored-by: Joaco Muleiro Beltran <[email protected]> Co-authored-by: Ellis Tarn <[email protected]> Co-authored-by: Ben Ash <[email protected]> * chore(59401): Upgrade vault to 1.11.x --------- Signed-off-by: Lionel H <[email protected]> Co-authored-by: Kaito Ii <[email protected]> Co-authored-by: Theron Voran <[email protected]> Co-authored-by: Tom Proctor <[email protected]> Co-authored-by: Eric Miller <[email protected]> Co-authored-by: Takumi Sue <[email protected]> Co-authored-by: Jason Hancock <[email protected]> Co-authored-by: Vadim Grek <[email protected]> Co-authored-by: nikstur <[email protected]> Co-authored-by: Jacob Mammoliti <[email protected]> Co-authored-by: Ethan J. Brown <[email protected]> Co-authored-by: Michele Baldessari <[email protected]> Co-authored-by: André Becker <[email protected]> Co-authored-by: Michael Schuett <[email protected]> Co-authored-by: Troy Fluegge <[email protected]> Co-authored-by: lion24 <[email protected]> Co-authored-by: Alvin Huang <[email protected]> Co-authored-by: Christian <[email protected]> Co-authored-by: Viacheslav Vasilyev <[email protected]> Co-authored-by: Remco Buddelmeijer <[email protected]> Co-authored-by: Christopher Swenson <[email protected]> Co-authored-by: gw0 <[email protected]> Co-authored-by: Stephen Herd <[email protected]> Co-authored-by: Joaco Muleiro Beltran <[email protected]> Co-authored-by: Ellis Tarn <[email protected]> Co-authored-by: Ben Ash <[email protected]> Co-authored-by: Aleksey <[email protected]> Co-authored-by: Bruno Padilha <[email protected]> Co-authored-by: Jack Halford <[email protected]> Co-authored-by: ChrisFraun <[email protected]> Co-authored-by: Alex Khaerov <[email protected]> Co-authored-by: Sam Weston <[email protected]> Co-authored-by: Julian Setiawan <[email protected]> Co-authored-by: marcboudreau <[email protected]> Co-authored-by: Hadie Laham <[email protected]> Co-authored-by: Subhrajit Nag <[email protected]> Co-authored-by: guru1306 <[email protected]> Co-authored-by: Jason O'Donnell <[email protected]> Co-authored-by: Paul <[email protected]> Co-authored-by: Arie Lev <[email protected]> Co-authored-by: Paul Witt <[email protected]> Co-authored-by: Sam Marshall <[email protected]> Co-authored-by: Hamza ZOUHAIR <[email protected]> Co-authored-by: Javier Criado Marcos <[email protected]> Co-authored-by: mehmetsalgar <[email protected]> Co-authored-by: Sarah Thompson <[email protected]> Co-authored-by: Iñigo Horcajo <[email protected]> Co-authored-by: Rule88 <[email protected]> Co-authored-by: Ricardo Gândara Pinto <[email protected]> Co-authored-by: adhish2001 <[email protected]> Co-authored-by: Adhish Maheswaran <[email protected]>