MCP39F511N metrics provider

config.yml.example

@@ -74,6 +74,8 @@ measurement:
 #        resolution: 100
 #      psu.energy.ac.powerspy2.machine.provider.PsuEnergyAcPowerspy2MachineProvider:
 #        resolution: 250
+#      psu.energy.ac.mcp.machine.provider.PsuEnergyAcMcpMachineProvider:
+#        resolution: 100
 #      psu.energy.ac.ipmi.machine.provider.PsuEnergyAcIpmiMachineProvider:
 #        resolution: 100
     #--- Sensors - these providers need the lm-sensors package installed

metric_providers/psu/energy/ac/mcp/machine/Makefile

@@ -0,0 +1,6 @@
+CFLAGS = -o3 -Wall -lm
+
+metric-provider-binary: source.c
+	gcc $< $(CFLAGS) -o $@
+	sudo chown root $@
+	sudo chmod u+s $@

metric_providers/psu/energy/ac/mcp/machine/README.md

@@ -0,0 +1,3 @@
+# Information
+
+TODO

metric_providers/psu/energy/ac/mcp/machine/mcp_com.h

@@ -0,0 +1,10 @@
+#ifndef __MCP_COM_H
+#define __MCP_COM_H
+
+enum mcp_types { f501, f511 };
+
+int f511_init(const char *port);
+/* Power in 10mW for channel 1 and 2 */
+int f511_get_power(int *ch1, int *ch2, int fd);
+
+#endif

metric_providers/psu/energy/ac/mcp/machine/provider.py

@@ -0,0 +1,14 @@
+import os
+
+#pylint: disable=import-error, invalid-name
+from metric_providers.base import BaseMetricProvider
+
+class PsuEnergyAcMcpMachineProvider(BaseMetricProvider):
+    def __init__(self, resolution):
+        super().__init__(
+            metric_name='psu_energy_ac_mcp_machine',
+            metrics={'time': int, 'value': int},
+            resolution=resolution,
+            unit="mJ",
+            current_dir=os.path.dirname(os.path.abspath(__file__)),
+        )

metric_providers/psu/energy/ac/mcp/machine/source.c

@@ -0,0 +1,263 @@
+#include <errno.h>
+#include <fcntl.h>
+#include <stdio.h>
+#include <stdint.h>
+#include <string.h>
+#include <termios.h>
+#include <unistd.h>
+#include <stdlib.h>
+#include <sys/time.h>
+
+#include "mcp_com.h"
+
+/*
+    This file is mostly copied from https://github.com/osmhpi/pinpoint/blob/master/src/data_sources/mcp_com.c
+    Credits to Sven Köhler and the OSM group from the HPI
+
+    In case the file is not original work: Possible prior origins of the file are unknown. However it is an implementation
+    of the protocol defined here:
+    - https://www.microchip.com/en-us/development-tool/ADM00706
+    - https://ww1.microchip.com/downloads/aemDocuments/documents/OTH/ProductDocuments/DataSheets/20005473B.pdf
+*/
+
+// Set address pointer to 0xa (active power), read 32 bits
+const unsigned char f501_read_active_power[] = { 0x41, 0x0, 0xa, 0x44 };
+const unsigned char f501_read_apparent_power_divisor[] =
+    { 0x41, 0x00, 0x40, 0x52 };
+const unsigned char f501_set_apparent_power_divisor[] =
+    { 0x41, 0x00, 0x40, 0x57, 0x00, 0x03 };
+const unsigned char f501_set_accumulation_interval[] =
+    { 0x41, 0x00, 0x5A, 0x57, 0x00, 0x00 };
+const unsigned char f501_read_range[] = { 0x41, 0x00, 0x48, 0x44 };
+
+const unsigned char f511_read_active_power[] = { 0x41, 0x0, 0x16, 0x4E, 8 };
+const unsigned char f511_read_active_power1[] = { 0x41, 0x0, 0x16, 0x4E, 4 };
+const unsigned char f511_read_active_power2[] = { 0x41, 0x0, 0x1a, 0x4E, 4 };
+const unsigned char f511_set_accumulation_interval[] =
+    { 0x41, 0x00, 0xA8, 0x4D, 2, 0x00, 0x00 };
+
+/* This variable ist just global for consitency with our other metric_provider source files */
+static unsigned int msleep_time=1000;
+
+enum mcp_states { init, wait_ack, get_len, get_data, validate_checksum };
+
+enum mcp_states mcp_state = wait_ack;
+
+int init_serial(const char *port, int baud)
+{
+    struct termios tty;
+    int fd;
+
+    fd = open(port, O_RDWR | O_NOCTTY | O_SYNC);
+    if (fd < 0) {
+        return -1;
+    }
+
+    if (tcgetattr(fd, &tty) < 0) {
+        return -1;
+    }
+
+    cfsetospeed(&tty, (speed_t) baud);
+    cfsetispeed(&tty, (speed_t) baud);
+
+    tty.c_cflag |= (CLOCAL | CREAD);    /* ignore modem controls */
+    tty.c_cflag &= ~CSIZE;
+    tty.c_cflag |= CS8;    /* 8-bit characters */
+    tty.c_cflag &= ~PARENB;    /* no parity bit */
+    tty.c_cflag &= ~CSTOPB;    /* only need 1 stop bit */
+    tty.c_cflag &= ~CRTSCTS;    /* no hardware flowcontrol */
+
+    /* setup for non-canonical mode */
+    tty.c_iflag &=
+        ~(IGNBRK | BRKINT | PARMRK | ISTRIP | INLCR | IGNCR | ICRNL | IXON);
+    tty.c_lflag &= ~(ECHO | ECHONL | ICANON | ISIG | IEXTEN);
+    tty.c_oflag &= ~OPOST;
+
+    /* fetch bytes as they become available */
+    tty.c_cc[VMIN] = 1;
+    tty.c_cc[VTIME] = 1;
+
+    if (tcsetattr(fd, TCSANOW, &tty) != 0) {
+        return -1;
+    }
+    return fd;
+}
+
+int mcp_cmd(unsigned char *cmd, unsigned int cmd_length, unsigned char *reply, int fd)
+{
+    int CMD_MAX_PACKET_LEN = 80;
+    unsigned char buf[80];
+    unsigned char command_packet[CMD_MAX_PACKET_LEN];
+    int rdlen;
+    uint8_t len;
+    uint8_t i;
+    uint8_t checksum = 0;
+    uint8_t datap = 0;
+
+    // the cmd has a length. Now we create a command_packet with an initializer (0xa5 + length + cmd + checksum), which
+    // makes it in the end cmd_length + 3
+    command_packet[0] = 0xa5;
+    command_packet[1] = cmd_length + 3; // cmd_length gets extended by 3 byte for the command packet
+
+    if (cmd_length > CMD_MAX_PACKET_LEN - 3) {
+        fprintf(stderr, "Error: cmd_length was %d but should be < %d\n", cmd_length, CMD_MAX_PACKET_LEN);
+        return -1;
+    }
+
+    // only write here cmd_length lenght as this is the actual length we have
+    // copy it in starting from the 2nd position in the char array, since first two are taken for initialize and length
+    memcpy(command_packet + 2, cmd, cmd_length);
+    for (i = 0; i < cmd_length + 2; i++) { // here we do not need to iterate to cmd_length+3 since we are just bulding the last element
+        checksum += command_packet[i];
+    }
+    command_packet[i] = checksum;
+    tcflush(fd, TCIOFLUSH);
+    // here we still have to write the +3 lenght, as this is how we now sized the command_packet
+    len = write(fd, command_packet, cmd_length + 3);
+    if (len != cmd_length + 3) {
+        return -1;
+    }
+    tcdrain(fd);
+    while (1) {
+        rdlen = read(fd, buf, 1);
+        if (rdlen == 0) {
+            return -1;
+        }
+        switch (mcp_state) {
+        case wait_ack:
+            if (buf[0] == 0x06) {
+                /* Only read commands will return more than an ACK */
+                if ((command_packet[5] == 0x44)
+                    || (command_packet[5] == 0x52)
+                    || (command_packet[5] == 0x4e)) {
+                    mcp_state = get_len;
+                } else {
+                    return 0;
+                }
+            }
+            break;
+        case get_len:
+            len = buf[0];
+            /* Workaround for sporadically broken packets, fix me! */
+            if(len != 11){
+                mcp_state = wait_ack;
+                return -1;
+            }
+            mcp_state = get_data;
+            break;
+        case get_data:
+            reply[datap++] = buf[0];
+            if ((datap + 2) == (len - 1)) {
+                mcp_state = validate_checksum;
+            }
+            break;
+        case validate_checksum:
+            mcp_state = wait_ack;
+            checksum = 0x06 + len;
+            for (i = 0; i < (len - 3); i++) {
+                checksum += reply[i];
+            }
+            if (checksum == buf[0]) {
+                return len - 3;
+            } else {
+                return -1;
+            }
+            break;
+        default:
+            mcp_state = wait_ack;
+        }
+
+    }
+}
+
+
+
+int f511_get_power(int *ch1, int *ch2, int fd)
+{
+    int res;
+    unsigned char reply[40];
+    res = mcp_cmd((unsigned char *)&f511_read_active_power,
+            sizeof(f511_read_active_power), (unsigned char *)&reply, fd);
+    if (res > 0) {
+        *ch1 = (reply[3] << 24) + (reply[2] << 16)
+            + (reply[1] << 8) + reply[0];
+        *ch2 = (reply[7] << 24) + (reply[6] << 16)
+            + (reply[5] << 8) + reply[4];
+        return 0;
+    } else {
+        return -1;
+    }
+}
+
+int f511_init(const char *port)
+{
+    unsigned char reply[80];
+    int res;
+    int fd;
+
+    fd = init_serial(port, B115200);
+
+    if (fd < 0) {
+        fprintf(stderr, "Error. init_serial was not 0 but %d\n", fd);
+        return -1;
+    }
+    res = mcp_cmd((unsigned char *)f511_set_accumulation_interval,
+            sizeof(f511_set_accumulation_interval),
+            (unsigned char *)&reply, fd);
+    if(res < 0) {
+        fprintf(stderr, "Error. res was not 0 but %d\n", res);
+        return -1;
+    }
+    return fd;
+}
+
+
+
+int main(int argc, char **argv) {
+
+    int c;
+    struct timeval now;
+    int fd;
+    int result;
+    int data[2]; // The MCP has two outlets where you can measure.
+
+
+    while ((c = getopt (argc, argv, "hi:d")) != -1) {
+        switch (c) {
+        case 'h':
+            printf("Usage: %s [-h] [-m]\n\n",argv[0]);
+            printf("\t-h      : displays this help\n");
+            printf("\t-i      : specifies the milliseconds sleep time that will be slept between measurements\n\n");
+            exit(0);
+        case 'i':
+            msleep_time = atoi(optarg);
+            break;
+        default:
+            fprintf(stderr,"Unknown option %c\n",c);
+            exit(-1);
+        }
+    }
+
+    setvbuf(stdout, NULL, _IONBF, 0);
+
+    fd = f511_init("/dev/ttyACM0");
+    if(fd < 0) {
+        fprintf(stderr, "Error. Connection could not be opened\n");
+        return -1;
+    }
+
+    while (1) {
+        result = f511_get_power(&data[0], &data[1], fd);
+        if(result != 0) {
+            fprintf(stderr, "Error. Result was not 0 but %d\n", result);
+            break;
+        }
+        // The MCP returns the current power consumption in 10mW steps.
+        gettimeofday(&now, NULL);
+        printf("%ld%06ld %ld\n", now.tv_sec, now.tv_usec, (long)(data[0]*10*((double)msleep_time/1000)) );
+        usleep(msleep_time*1000);
+    }
+    close(fd);
+
+    return 0;
+}