feat(acps): Rest of knobs/buttons on ACPs/RMPs, Ovhd panel and shared cockpit

.github/CHANGELOG.md

@@ -92,6 +92,7 @@
 1. [EFCS] Fix ground spoiler retraction after increasing TLA slightly above 0 - @lukecologne (luke)
 1. [FWC] Improved LDG LT memo to take into account light position - @BravoMike99 (bruno_pt99)
 1. [PRESS] Add pressurization system failures - @mjuhe (Miquel Juhe)
+1. [COMMS] Enabled all components of communications panels - @Julian [Z+2 fr en esp]#8476 (Julian Sebline)
 
 ## 0.11.0
 

fbw-a32nx/docs/a320-simvars.md

@@ -384,65 +384,64 @@
     - Bool
     - Indicates if the APU fire button is RELEASED
 
-- A32NX_RMP_L_TOGGLE_SWITCH
+- A32NX_RMP_{L,R}_TOGGLE_SWITCH
     - Boolean
-    - Whether the left radio management panel toggle switch is on or off.
+    - Whether the left/right radio management panel toggle switch is on or off.
 
-- A32NX_RMP_R_TOGGLE_SWITCH
-    - Boolean
-    - Whether the right radio management panel toggle switch is on or off.
-
-- A32NX_RMP_L_SELECTED_MODE
-    - Number
-    - The current mode of the left radio management panel.
-
-- A32NX_RMP_R_SELECTED_MODE
-    - Number
-    - The current mode of the right radio management panel.
+- A32NX_RMP_{L,R}_SELECTED_MODE
+    - Enum
+    - The current mode of the left/right radio management panel.
+      Meaning | Value
+      --- | ---
+      VHF1 | 1
+      VHF2 | 2
+      VHF3 | 3
+      HF1 | 4
+      HF2 | 5
+      VOR | 6
+      ILS | 7
+      MLS | 8
+      ADF | 9
 
 - A32NX_RMP_{L,R}_NAV_BUTTON_SELECTED
     - Bool
-    - Whether the NAV push button on the corresponding RMP is pushed or not.
-
-- A32NX_RMP_L_VHF2_STANDBY
-    - Hz
-    - The VHF 2 standby frequency for the left RMP.
+    - Whether the NAV push button on the left/right RMP is pushed or not.
 
-- A32NX_RMP_L_VHF3_STANDBY
+- A32NX_RMP_{L,R}_VHF{1,2,3}_STANDBY
     - Hz
-    - The VHF 3 standby frequency for the left RMP.
+    - The VHF 1/2/3 standby frequency for the left/right RMP.
 
-- A32NX_RMP_R_VHF1_STANDBY
+- A32NX_RMP_HF{1,2}_ACTIVE_FREQUENCY
     - Hz
-    - The VHF 1 standby frequency for the right RMP.
+    - The HF 1/2 active frequency that is set.
 
-- A32NX_RMP_R_VHF3_STANDBY
+- A32NX_RMP_{L,R}_HF{1,2}_STANDBY_FREQUENCY
     - Hz
-    - The VHF 3 standby frequency for the right RMP.
+    - The HF 1/2 standby frequency for the left/right RMP.
 
 - A32NX_RMP_{L,R}_SAVED_ACTIVE_FREQUENCY_VOR
     - Hz
-    - The VOR active frequency that is saved for display for the left/right RMP.
+    - The VOR active frequency that is saved for the left/right RMP.
 
 - A32NX_RMP_{L,R}_SAVED_ACTIVE_FREQUENCY_ILS
     - Hz
-    - The ILS active frequency that is saved for display for the left/right RMP.
+    - The ILS active frequency that is saved for the left/right RMP.
 
 - A32NX_RMP_{L,R}_SAVED_ACTIVE_FREQUENCY_ADF
     - Hz
-    - The ADF active frequency that is saved for display for the left/right RMP.
+    - The ADF active frequency that is saved for the left/right RMP.
 
 - A32NX_RMP_{L,R}_SAVED_STANDBY_FREQUENCY_VOR
     - Hz
-    - The VOR standby frequency that is saved for display for the left/right RMP.
+    - The VOR standby frequency that is saved for the left/right RMP.
 
 - A32NX_RMP_{L,R}_SAVED_STANDBY_FREQUENCY_ILS
     - Hz
-    - The ILS standby frequency that is saved for display for the left/right RMP.
+    - The ILS standby frequency that is saved for the left/right RMP.
 
 - A32NX_RMP_{L,R}_SAVED_STANDBY_FREQUENCY_ADF
     - Hz
-    - The ADF standby frequency that is saved for display for the left/right RMP.
+    - The ADF standby frequency that is saved for the left/right RMP.
 
 - A32NX_RMP_{L,R}_SAVED_COURSE_VOR
     - Number
@@ -452,6 +451,134 @@
     - Number
     - The ILS course tuned via the left/right RMP
 
+- A32NX_RMP_SEL_LIGHT_ON
+    - Bool
+    - If the SEL light is on
+
+- A32NX_ACP{1,2,3}_VHF{1,2}_TRANSMIT
+    - Bool
+    - Indicates which VHF is selected for transmission on which ACP
+      Value | Meaning
+      --- | ---
+      0 | Not selected
+      1 | Selected
+
+- A32NX_ACP{1,2,3}_VHF{1,2,3}_VOLUME
+    - Number
+    - Volume of VHF 1/2/3 on the left/right/overhead ACP
+
+- A32NX_ACP{1,2,3}_HF{1,2}_VOLUME
+    - Number
+    - Volume of HF 1/2 on the left/right/overhead ACP
+
+- A32NX_ACP{1,2,3}_MECH_VOLUME
+    - Number
+    - Volume of MECH on the left/right/overhead ACP
+
+- A32NX_ACP{1,2,3}_ATT_VOLUME
+    - Number
+    - Volume of CABIN on the left/right/overhead ACP
+
+- A32NX_ACP{1,2,3}_PA_VOLUME
+    - Number
+    - Volume of PA on the left/right/overhead ACP
+
+- A32NX_HF{1,2}_VOLUME
+    - Number
+    - The HF1/2 volume equal to one of the ACPs depending on the controlling mode
+
+- A32NX_ACP_MECH_VOLUME
+    - Number
+    - The MECH volume equal to one of the ACPs depending on the controlling mode
+
+- A32NX_ACP_ATT_VOLUME
+    - Number
+    - The CABIN volume equal to one of the ACPs depending on the controlling mode
+
+- A32NX_ACP_PA_VOLUME
+    - Number
+    - The PA volume equal to one of the ACPs depending on the controlling mode
+
+- A32NX_NAV_VOLUME:{1,2,3}
+    - Number
+    - The Morse volume for the corresponding nav transceiver equal to one of the ACPs depending on the controlling mode
+
+- A32NX_ADF_VOLUME:{1,2}
+    - Number
+    - The Morse volume for the corresponding adf transceiver equal to one of the ACPs depending on the controlling mode
+
+- A32NX_ACP{1,2,3}_VHF{1,2,3}_KNOB_VOLUME_DOWN
+    - Bool
+    - If the VHF 1/2/3 volume knob is activated on the left/right/overhead ACP
+
+- A32NX_ACP{1,2,3}_HF{1,2}_KNOB_VOLUME_DOWN
+    - Bool
+    - If the HF 1/2 volume knob is activated on the left/right/overhead ACP
+
+- A32NX_ACP{1,2,3}_MECH_KNOB_VOLUME_DOWN
+    - Bool
+    - If the MECH volume knob is activated on the left/right/overhead
+
+- A32NX_ACP{1,2,3}_ATT_KNOB_VOLUME_DOWN
+    - Bool
+    - If the CABIN volume knob is activated on the left/right/overhead ACP
+
+- A32NX_ACP{1,2,3}_PA_KNOB_VOLUME_DOWN
+    - Bool
+    - If the PA volume knob is activated on the left/right/overhead ACP
+
+- A32NX_ACP{1,2,3}_VOR{1,2}_KNOB_VOLUME_DOWN
+    - Bool
+    - If the VOR 1/2 volume knob is activated on the left/right/overhead ACP
+
+- A32NX_ACP{1,2,3}_ILS_KNOB_VOLUME_DOWN
+    - Bool
+    - If the ILS volume knob is activated on the left/right/overhead ACP
+
+- A32NX_ACP{1,2,3}_MLS_KNOB_VOLUME_DOWN
+    - Bool
+    - If the MLS volume knob is activated on the left/right/overhead ACP
+
+- A32NX_ACP{1,2,3}_MKR_KNOB_VOLUME_DOWN
+    - Bool
+    - If the ILS Markers volume knob is activated on the left/right/overhead ACP
+
+- A32NX_ACP{1,2,3}_ADF{1,2}_KNOB_VOLUME_DOWN
+    - Bool
+    - If the ADF 1/2 volume knob is activated on the left/right/overhead ACP
+
+- A32NX_ACP{1,2,3}_VOR{1,2}_VOLUME
+    - Number
+    - Volume of VOR 1/2 on the left/right/overhead ACP
+
+- A32NX_ACP{1,2,3}_ILS_VOLUME
+    - Number
+    - Volume of ILS on the left/right/overhead ACP
+
+- A32NX_ACP{1,2,3}_MLS_VOLUME
+    - Number
+    - Volume of MLS on the left/right/overhead ACP
+
+- A32NX_ACP{1,2,3}_MKR_VOLUME
+    - Number
+    - Volume of the ILS Markers on the left/right/overhead ACP
+
+- A32NX_ACP{1,2,3}_ADF{1,2}_VOLUME
+    - Number
+    - Volume of ADF 1/2 on the left/right/overhead ACP
+
+- A32NX_ACP{1,2,3}_SWITCH_INT
+    - Number
+    - Set to 0 whenever on RAD position. 100 whenever neutral position. 200 whenever in INT position
+
+- A32NX_SIDE_CONTROLLING
+    - Enum
+    - Indicates which side controls the airplane
+      Value | Meaning
+      --- | ---
+      0 | Captain
+      1 | FO
+
 - A32NX_TO_CONFIG_FLAPS
     - Enum
     - The pilot-entered FLAPS value in the PERF TAKE OFF page. 0 is a valid entry, -1 if not entered
@@ -3936,4 +4063,4 @@ In the variables below, {number} should be replaced with one item in the set: {
     - Determines the heading of the pushback tug from max left (-1.0) to right (1.0)
     - {number}
         - -1.0
-        - 1.0
+        - 1.0

fbw-a32nx/src/base/flybywire-aircraft-a320-neo/ModelBehaviorDefs/A32NX/Airbus.xml

@@ -131,7 +131,7 @@
             <WWISE_EVENT_2>mpb1off</WWISE_EVENT_2>
             <NORMALIZED_TIME_1>0.1</NORMALIZED_TIME_1>
             <NORMALIZED_TIME_2>0.5</NORMALIZED_TIME_2>
-            <TOOLTIPID>%((L:BTN_TERRONND_#ID#_ACTIVE, Bool))%{if}TT:COCKPIT.TOOLTIPS.TERRAIN_ON_ND_TURN_OFF%{else}TT:COCKPIT.TOOLTIPS.TERRAIN_ON_ND_TURN_ON%{en}</TOOLTIPID>
+            <TOOLTIPID>%((L:A32NX_BTN_TERRONND_#ID#_ACTIVE, Bool))%{if}TT:COCKPIT.TOOLTIPS.TERRAIN_ON_ND_TURN_OFF%{else}TT:COCKPIT.TOOLTIPS.TERRAIN_ON_ND_TURN_ON%{en}</TOOLTIPID>
         </DefaultTemplateParameters>
 
         <UseTemplate Name="FBW_AIRLINER_SubNodes_Setter_Template">
@@ -580,52 +580,6 @@
         </UseTemplate>
     </Template>
 
-    <Template Name="FBW_AIRBUS_Dummy_Radio">
-        <DefaultTemplateParameters>
-        </DefaultTemplateParameters>
-
-        <UseTemplate Name="FBW_AIRBUS_Push_Dummy_Template">
-            <NODE_ID>#NODE_ID_CALL1#</NODE_ID>
-            <POTENTIOMETER_SEQ2>#POTENTIOMETER#</POTENTIOMETER_SEQ2>
-        </UseTemplate>
-        <UseTemplate Name="FBW_AIRBUS_Push_Dummy_Template">
-            <NODE_ID>#NODE_ID_CALL2#</NODE_ID>
-            <POTENTIOMETER_SEQ2>#POTENTIOMETER#</POTENTIOMETER_SEQ2>
-        </UseTemplate>
-        <UseTemplate Name="FBW_AIRBUS_Push_Dummy_Template">
-            <NODE_ID>#NODE_ID_CALL3#</NODE_ID>
-            <POTENTIOMETER_SEQ2>#POTENTIOMETER#</POTENTIOMETER_SEQ2>
-        </UseTemplate>
-        <UseTemplate Name="FBW_AIRBUS_Push_Dummy_Template">
-            <NODE_ID>#NODE_ID_CALL4#</NODE_ID>
-            <POTENTIOMETER_SEQ2>#POTENTIOMETER#</POTENTIOMETER_SEQ2>
-        </UseTemplate>
-        <UseTemplate Name="FBW_AIRBUS_Push_Dummy_Template">
-            <NODE_ID>#NODE_ID_CALL5#</NODE_ID>
-            <POTENTIOMETER_SEQ2>#POTENTIOMETER#</POTENTIOMETER_SEQ2>
-        </UseTemplate>
-        <UseTemplate Name="FBW_AIRBUS_Push_Dummy_Template">
-            <NODE_ID>#NODE_ID_MECH#</NODE_ID>
-            <POTENTIOMETER_SEQ2>#POTENTIOMETER#</POTENTIOMETER_SEQ2>
-        </UseTemplate>
-        <UseTemplate Name="FBW_AIRBUS_Push_Dummy_Template">
-            <NODE_ID>#NODE_ID_ATT#</NODE_ID>
-            <POTENTIOMETER_SEQ2>#POTENTIOMETER#</POTENTIOMETER_SEQ2>
-        </UseTemplate>
-        <UseTemplate Name="FBW_AIRBUS_Push_Dummy_Template">
-            <NODE_ID>#NODE_ID_VOICE#</NODE_ID>
-            <POTENTIOMETER_SEQ2>#POTENTIOMETER#</POTENTIOMETER_SEQ2>
-        </UseTemplate>
-        <UseTemplate Name="FBW_AIRBUS_Push_Dummy_Template">
-            <NODE_ID>#NODE_ID_RESET#</NODE_ID>
-            <ONLY_SEQ2/>
-            <POTENTIOMETER_SEQ2>#POTENTIOMETER#</POTENTIOMETER_SEQ2>
-        </UseTemplate>
-        <UseTemplate Name="FBW_AIRBUS_Push_Dummy_Template">
-            <NODE_ID>#NODE_ID_PA#</NODE_ID>
-            <ONLY_SEQ1/>
-        </UseTemplate>
-    </Template>
 
     <Template Name="FBW_AIRBUS_WeatherRadar_Mode_Template">
         <DefaultTemplateParameters>
@@ -921,24 +875,24 @@
                     </UseTemplate>
                     <UseTemplate Name = "ASOBO_GT_Interaction_LeftSingle_Code">
                         <LEFT_SINGLE_CODE>
-                        (#SWITCH_POSITION_TYPE#:#SWITCH_POSITION_VAR#) ! (&gt;#SWITCH_POSITION_TYPE#:#SWITCH_POSITION_VAR#)
-                        #LEFT_SINGLE_CODE#
+                            (#SWITCH_POSITION_TYPE#:#SWITCH_POSITION_VAR#) ! (&gt;#SWITCH_POSITION_TYPE#:#SWITCH_POSITION_VAR#)
+                            #LEFT_SINGLE_CODE#
                         </LEFT_SINGLE_CODE>
                     </UseTemplate>
                 </Case>
                 <Case Value="3">
                     <UseTemplate Name = "ASOBO_GT_Switch_3States">
                         <CODE_POS_0>
-                        0 (&gt;#SWITCH_POSITION_TYPE#:#SWITCH_POSITION_VAR#)
-                        #CODE_POS_0#
+                            0 (&gt;#SWITCH_POSITION_TYPE#:#SWITCH_POSITION_VAR#)
+                            #CODE_POS_0#
                         </CODE_POS_0>
                         <CODE_POS_1>
-                        1 (&gt;#SWITCH_POSITION_TYPE#:#SWITCH_POSITION_VAR#)
-                        #CODE_POS_1#
+                            1 (&gt;#SWITCH_POSITION_TYPE#:#SWITCH_POSITION_VAR#)
+                            #CODE_POS_1#
                         </CODE_POS_1>
                         <CODE_POS_2>
-                        2 (&gt;#SWITCH_POSITION_TYPE#:#SWITCH_POSITION_VAR#)
-                        #CODE_POS_2#
+                            2 (&gt;#SWITCH_POSITION_TYPE#:#SWITCH_POSITION_VAR#)
+                            #CODE_POS_2#
                         </CODE_POS_2>
                         <STATE0_TEST>(#SWITCH_POSITION_TYPE#:#SWITCH_POSITION_VAR#) 0 ==</STATE0_TEST>
                         <STATE1_TEST>(#SWITCH_POSITION_TYPE#:#SWITCH_POSITION_VAR#) 1 ==</STATE1_TEST>
@@ -949,27 +903,6 @@
         </Component>
     </Template>
 
-    <Template Name="A32NX_Audio_Panel_Volume_Dummy">
-        <DefaultTemplateParameters>
-            <AUDIO_KNOB_POWERED>1</AUDIO_KNOB_POWERED>
-        </DefaultTemplateParameters>
-        <Component ID="#NODE_ID#_Light" Node="#NODE_ID#">
-            <UseTemplate Name="ASOBO_GT_Emissive_Gauge">
-                <EMISSIVE_CODE>
-                    #AUDIO_KNOB_POWERED# ! if{
-                        0
-                    } els{
-                        (L:A32NX_OVHD_INTLT_ANN) 0 == (L:A32NX_ELEC_DC_2_BUS_IS_POWERED, Bool) and if{
-                            14
-                        } els{
-                            (A:LIGHT POTENTIOMETER:#POTENTIOMETER#, Percent over 100) 0.5 *
-                        }
-                    }
-                </EMISSIVE_CODE>
-            </UseTemplate>
-        </Component>
-    </Template>
-
     <Template Name="A32NX_SWITCH_DOORPANEL_LOCK">
         <Component ID="#NODE_ID#" Node="#NODE_ID#">
             <UseTemplate Name="ASOBO_GT_Switch_3States">
@@ -1077,13 +1010,13 @@
             <BTN_TOOLTIP_ID>#BTN_ID#</BTN_TOOLTIP_ID>
             <ON_TOOLTIP>COCKPIT.TOOLTIPS.EFIS_PANEL_#BTN_TOOLTIP_ID#_INFO_TURN_OFF</ON_TOOLTIP>
             <OFF_TOOLTIP>COCKPIT.TOOLTIPS.EFIS_PANEL_#BTN_TOOLTIP_ID#_INFO_TURN_ON</OFF_TOOLTIP>
-            <ONOFF_VARIABLE>L:BTN_#BTN_ID#_FILTER_ACTIVE</ONOFF_VARIABLE>
+            <ONOFF_VARIABLE>L:A32NX_BTN_#BTN_ID#_FILTER_ACTIVE</ONOFF_VARIABLE>
         </DefaultTemplateParameters>
 
         <UseTemplate Name="FBW_AIRLINER_SubNodes_Setter_Template">
             <TEMPLATE_TO_CALL>ASOBO_GT_Push_Button_Airliner</TEMPLATE_TO_CALL>
             <LEFT_SINGLE_CODE>(&gt;H:#PLANE_PREFIX#_MFD_BTN_#BTN_ID#) (&gt;H:#PLANE_PREFIX#_PFD_BTN_#BTN_ID#) and</LEFT_SINGLE_CODE>
-            <SEQ1_EMISSIVE_CODE>(L:BTN_#BTN_ID#_FILTER_ACTIVE)</SEQ1_EMISSIVE_CODE>
+            <SEQ1_EMISSIVE_CODE>(L:A32NX_BTN_#BTN_ID#_FILTER_ACTIVE)</SEQ1_EMISSIVE_CODE>
             <TOOLTIPID>%((#ONOFF_VARIABLE#))%{if}TT:#ON_TOOLTIP#%{else}TT:#OFF_TOOLTIP#%{end}</TOOLTIPID>
         </UseTemplate>
     </Template>