Trouser-Streak v0.5.5

Release for 1.19.4, 1.19.3 and 1.19.2! Use the correct jar for your version. Source for 1.19.2 or 1.19.3 is in the zip file here, and also in their respective branches.
1.19.4 version here is for Meteor devbuilds with version LESS than 1830 Get the latest upload if you have updated meteor client

MOUNTAIN MAKER BOT SHOWCASE :) <3<3<3
https://www.youtube.com/watch?v=EbZs6FZrNjg

0.5.5

-The New MountainMakerBot option builds stairs from bottom to top, and when it goes up as many blocks as the "Mountain Height" option it starts lavacasting on your staircase. Just click and wait for a mountain. Not intended for use in a closed in space.
-Added extra rendered blocks for the MountainMakerBot option to show you where you will build building to.
-Added Timing Modes for AutoLavaCaster

• The brand new UseLastAutoMountain timing mode uses your last Mountain (do not deactivate AutoMountain until done building it) to predict the LavaTimer and calculates the flow rate if the top of the mountain is a 45 degree angle and the rest is going straight down to the ground.
• FortyFiveDegreeStairs mode estimates based on 45degree stairs down to sealevel(Y63), or down to Y-60 if you are below Y64.
• ChooseBottomY mode estimates time based on 45degree stairs going down to the Y level you set in the timer options from your position.

-Added an AutoPositioning option for AutoLavacaster, which allows you to use it when flying just make sure you target the top of the right block. It positions you up and at an angle from the block you are targeting. Also not intended for use in a closed in space.
-Made AutoLavacaster only work if you are aiming at the top of a block, as it is designed for casting ontop staircases.
-Made it not possible to enable AutoMountain while AutoLavaCaster is going.
-Increased the delay before lava after making a layer with AutoLavaCaster, to help prevent your lava being turned into obsidian.
-Added LastMountain option to .lavacalc command. It still works as normal if you input numbers, or if you input "LastMountain" it will return how long lava flow will take from your Y level to ground across the last Mountain you made.
-Made AutoMountain and AutoLavacaster not try to use flower pots to make mountains. Flower pots do not make mountains.
-Deleted directional buttons from AutoMountain options menu. They were not really useful for the module.

-No more getting hurt when using TPFly, that's fixed.
-Made TrouserBuild attempt to build in loops instead of for a timer. It will attempt to build from top row to bottom X amount of times you set until you can build again (incase all the blocks do not get placed the first time).

Known bug
-The UseLastLowestBlockfromAutoMountain timing mode may not time correctly if AutoMountain is turned off before completing the mountain you want to cast on. Pause by pressing useKey if you intend to make more stairs on that mountain.

Note
-If you insist upon not starting AutoMountain paused, you can get the correct timing for the UseLastLowestBlockfromAutoMountain in AutoLavaCaster by

• 1: ENABLE ResetLowestBlockOnDEACTIVATE in AutoLavaCaster and
• 2: DISABLE ResetLowestBlockOnACTIVATE in AutoMountain.
  -This will return the lowest block placed with AutoMountain until AutoLavacast is used.
  -You can reset lowestblock after doing the above by enabling and disabling AutoLavaCaster or by pressing the button in AutoMountain options.

See the releases page for previous changelogs if you missed the last couple updates. :)

Trouser-Streak v0.5.4

Release for 1.19.4, 1.19.3 and 1.19.2! Use the correct jar for your version. Source for 1.19.2 or 1.19.3 is in the zip files here, and also in their respective branches.

0.5.4
-NewerNewchunks was not distinguishing FlowBelowY0 and "Newchunks" correctly as a result of me messing up a bit when I cleaned up the module. This is now fixed. (sorry 'bout that folks)
-Added more simple AutoTool option for ShulkerDupe which just uses whatever pickaxe it can find in your hotbar going from left to right. (If you do not have a pickaxe in hotbar it will not switch your selected slot.)
-Removed the skidded Autotool code from ShulkerDupe. (Credits to MeteorClient for that code that was removed)

See the releases page for previous changelogs if you missed the last couple updates. :)

Trouser-Streak v0.5.3

Release for 1.19.4, 1.19.3 and 1.19.2! Use the correct jar for your version. Source for 1.19.2 or 1.19.3 is in the zip files here, and also in their respective branches.

0.5.3
-Fixed block checks in AutoMountain so you can use it over existing stairs to patch up any gaps. (This bug was a result of the rewrite, sorry)
-Made AirStrike+'s Speed option actually do something for the things it can rain down other than fireballs.
-AutoDrop now drops ontick when selecting slot to drop now, not every second tick.
-Removed directional Buttons from AutoStaircase as turning is not reliable with it, as well as the useless centermode option.
-Improved pausing by pressing backKey in AutoStaircase.
-Removed Timer on/off option in AutoStaircase, and just set the timer slider to a default of 1.
-Made onTarget option not visible to Lightning mode in Boom+. Lighting is always spawned on target.
-Made Speed option not visible if OnTarget is selected in Boom+.
-Fixed creepers spawning twice as fast if two movement buttons were held in ExplosionAura.
-Moar code cleaned up. In AutoDrop, AutoStaircase, Boom+, ExplosionAura, and a little bit in many other modules

See the releases page for previous changelogs if you missed the last couple updates. :)

Trouser-Streak v0.5.2

Release for 1.19.4, 1.19.3 and 1.19.2! Use the correct jar for your version. Source for 1.19.2 or 1.19.3 is in the zip files here, and also in their respective branches.

0.5.2
AutoMountain Big Update
-Code rewritten and cleanedup. (Everything moved to OnTick events, and removed a ton of useless junk codes.)
-Adjusted block placement so blocks are always placed under your feet when AutoMountaining.
-PauseBasedAntikick now false by default as the new block placement method prevents getting kicked for flying.
-Building diagonally is now done by holding the sneakKey and a directional button.
-Synced diagonal switching with the place delay option.
-Fixed building diagonally spinning you around sometimes if the server is lagging.
-Fixed AutoMountain not allowing you to turn using the keys when paused as a result of the PauseBasedAntikick feature.
-Added Disable On Disconnect so you can choose whether or not to disable to module when disconnecting.
-Moved PlacementTickDelay and DiagonalSwitchDelay to the Timings section of the AutoMountain options.
-Reduced OnDemandSpacing option as you can't reach quite as far with this method of block placement.
-Removed Vertical spacing in favour of using just the OnDemandSpacing option.

NewerNewChunks
-Fixed NewerNewChunks crashing the game when enabled in singleplayer, and using Linux (and hopefully Mac too).

See the releases page for previous changelogs if you missed the last couple updates. :)

Trouser-Streak v0.5.1

Release for 1.19.4, 1.19.3 and 1.19.2! Use the correct jar for your version. Source for 1.19.2 or 1.19.3 is in the zip files here, and also in their respective branches.

0.5.1
-Adjusted order of movement and placement in AutoMountain slightly
-Made AutoMountain only attempt to place the block beneath your feet for one tick, when pausing as a result of the PauseBasedAntikick feature. (If you insist upon using Viafabric this could help make block placement more consistent when on older servers)
-Added a couple more splash texts

See the releases page for previous changelogs if you missed the last couple updates. :)

Trouser-Streak v0.5.0

Release for 1.19.4, 1.19.3 and 1.19.2! Use the correct jar for your version. Source for 1.19.2 or 1.19.3 is in the zip files here, and also in their respective branches.

0.5.0
-Added SweepAway option to HandOfGod. Enable the option and hold right click to sweep the world away.

added then removed this change.
-Made AutoMountain attempt to place the block beneath your feet every tick until it is placed when increasing placement delay. (Hopefully to help fix any block skipping)
if you are one of the few who got the 0.5.0 right away and are having issues with automountain, please download again I fixed my silly
The issue was due to viafabric's block check on older servers. Do not use viafabric, use MultiConnect or viafabricplus to avoid any block placemment issues

See the releases page for previous changelogs if you missed the last couple updates. :)

Trouser-Streak v0.4.9

Release for 1.19.4, 1.19.3 and 1.19.2! Use the correct jar for your version. Source for 1.19.2 or 1.19.3 is in the zip files here, and also in their respective branches.

0.4.9
NewerNewChunks Fixy
-Actually did fix chunk colour mixing and optimized chunk detection. I think I'm done messing with this module now, promises.
-Also changed default colour opacity to something easier on the eyes.

note
I noticed this change in the previous version makes the Advanced Mode and IgnorFlowBelow0 Mode in NewerNewchunks a bit easier to use.
"-Made Newchunks overwrite flowBelowY0 chunks to aid in tracing servers which have been updated from an old version to new build limits."

See the releases page for previous changelogs if you missed the last couple updates. :)

Trouser-Streak v0.4.8

0.4.8
NewerNewChunks Updates
-Made the render height option work more sensibly.
-Made Newchunks overwrite flowBelowY0 chunks to aid in tracing servers which have been updated from an old version to new build limits.
AutoLavaCaster Update
-Adjusted order of events slightly to be a bit more sensible, when placing 5 blocks ontop of the mountain as part of the change build style option.
-Made block selection for autolavacaster to cast on more reliable when building upward.
-Made AutoLavaCaster jump to move upward. (Maybe allow it to work on servers with anticheat?)
-Seperated block placements to single placements when changing build style and placing multiple blocks. (Maybe allow it to work on servers with anticheat?)
-Added missing "Starting Layer 1" message if activating the module with LayersUntilSwitchBuildStyle set to 0.
AutoMountain Update
-Added a tick delay to block placement, to help the AutoSwap stack option and the AutoReplenish module to keep up with you.

Trouser-Streak v0.4.7

Release for 1.19.4, 1.19.3 and 1.19.2! Use the correct jar for your version. Source for 1.19.2 or 1.19.3 is in the zip files here, and also in their respective branches.

0.4.7

AUTOMOUNTAIN FIX
-FIXED THE DAMAGE!
-You really shouldn't die while building downward now. I actually tested this time on a few different servers to confirm.
-Removed the AntiDeath option as it's no longer needed.
-Made automountain only center character and place a block beneath your feet on activation when not starting paused.
Moar stuff
-Implemented a block placement delay into TrouserBuild, which causes it to build from the top down. Set the delay to 0 for instant building. (delay 0 does not work on all servers though)
-Removed falling blocks from the list of blocks TrouserBuild will try to use
-Made an option for VoiderPlus to calculate MaxHeight based on the players Y level.

See the releases page for previous changelogs if you missed the last couple updates. :)

Trouser-Streak v0.4.6

Release for 1.19.4, 1.19.3 and 1.19.2! Use the correct jar for your version. Source for 1.19.2 or 1.19.3 is in the zip files here, and also in their respective branches.

0.4.6
-Updated to 1.19.4! I still also support 1.19.3, and 1.19.2 for those of you still on those versions.
-New Module, TrouserBuild! It can build either horizontally or vertically according to a 5x5 grid centered on the block you are aiming at.
-FlightAntikick module added in to substitute the lack of an antikick for velocity flight in MeteorClient. It simply moves you down on a timer. Bind it to the same key as flight.
-Removed TrouserFlight module, it was causing issues in 1.19.4.
-Removed AutoBuild in favour of TrouserBuild. (I'm trying to do less skids lol.)
-Removed the Banana utils used by AutoBuild.
-Increased HandofGod range.
-Optimised NewerNewChunk detection methods. (still based on liquid flow)
-Boom+ removed Instant and Motion modes for fireball for a single Fireball mode.
-Boom+ on target option actually spawns fireballs on the target now.

See the releases page for previous changelogs if you missed the last couple updates. :)