E2E FSGroup Test Fix

test/e2e-fsgroup/Makefile

@@ -0,0 +1,41 @@
+#
+#
+# Copyright © 2020-2024 Dell Inc. or its subsidiaries. All Rights Reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#      http://www.apache.org/licenses/LICENSE-2.0
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+#
+# Makefile for FSGroup e2e Tests
+
+# Variables
+GINKGO_BIN_PATH = /root/go/bin/ginkgo
+GINKGO_INSTALL_CMD = go install github.com/onsi/ginkgo/v2/ginkgo
+GINKGO_DEST_PATH = /usr/bin/ginkgo
+
+# Default target to run all tasks
+.PHONY: all
+all: install-ginkgo run-tests
+
+# Target to install Ginkgo v2, verify the installation, and move the binary
+.PHONY: install-ginkgo
+install-ginkgo:
+	@echo "Installing Ginkgo v2..."
+	$(GINKGO_INSTALL_CMD)
+	@echo "Verifying Ginkgo installation..."
+	$(GINKGO_BIN_PATH) version
+	@echo "Moving Ginkgo binary to /usr/bin..."
+	sudo mv $(GINKGO_BIN_PATH) $(GINKGO_DEST_PATH)
+
+# Target to run FSGroup e2e tests
+.PHONY: run-tests
+run-tests:
+	@echo "Running FSGroup e2e tests..."
+	./run.sh

test/e2e-fsgroup/README.md

@@ -0,0 +1,108 @@
+# FSGroup e2e Tests
+
+## Prerequisites
+Ensure that you have Go installed on your system to install Ginkgo.
+
+## Using the Makefile
+
+This project includes a `Makefile` to automate the installation of Ginkgo, verify its installation, and run the FSGroup e2e tests. You can use the following commands to perform these tasks:
+
+### Install Ginkgo v2 and Run Tests
+
+To install Ginkgo, verify the installation, move the binary to a more accessible location, and run the FSGroup tests, run:
+```bash
+make all
+```
+
+### Individual Makefile Targets
+
+You can also run each step separately using the following commands:
+
+- **Install Ginkgo v2, verify the installation, and move the binary:**
+   ```bash
+   make install-ginkgo
+   ```
+
+- **Run FSGroup e2e tests:**
+   ```bash
+   make run-tests
+   ```
+
+## Manual Installation Steps
+
+If you prefer to install Ginkgo manually, follow these steps:
+
+### Installing Ginkgo v2
+
+To install Ginkgo, use the following command:
+```bash
+go install github.com/onsi/ginkgo/v2/ginkgo
+```
+
+### Verify Installation
+
+After installation, check the Ginkgo version with:
+```bash
+/root/go/bin/ginkgo version
+```
+
+You should see output similar to:
+```
+Ginkgo Version 2.x.x
+```
+
+### Move the Ginkgo Binary
+
+Move the Ginkgo binary to a more accessible location:
+```bash
+mv /root/go/bin/ginkgo /usr/bin/ginkgo
+```
+
+## Running Tests
+
+Install PowerFlex csi-driver, update `e2e-values.yaml` and run the following command to execute FSGroup tests:
+
+```bash
+./run.sh
+```
+
+### Understanding the `--focus` Flag
+
+The `--focus` flag filters the tests, looking for string matches in `Describe()` Ginkgo nodes. For example, in the file `fs.go`, you might see:
+
+```go
+ginkgo.Describe("Volume Filesystem Group Test", ginkgo.Label("csi-fsg"), ginkgo.Label("csi-fs"), ginkgo.Serial, func() {
+    // Test implementation
+})
+```
+
+## Test File Overview
+
+### `fs.go`
+
+This file creates a StorageClass, PersistentVolumeClaim (PVC) with that StorageClass, and a Pod that mounts this PVC, setting the `fsGroup` as specified.
+
+- All necessary variables are declared in `e2e-values.yaml`.
+- Helper methods to interact with Kubernetes are located in `utils.go`.
+- Default timeouts for Kubernetes operations are defined in the E2E framework. CRUD operations are executed through:
+  ```go
+  fpod "k8s.io/kubernetes/test/e2e/framework/pod"
+  fpv "k8s.io/kubernetes/test/e2e/framework/pv"
+  fss "k8s.io/kubernetes/test/e2e/framework/statefulset"
+  ```
+
+### `fs_scaleup_scaledown.go`
+
+This file includes more complex tests that utilize a StatefulSet to create a Pod and expose a PVC/PV. It scales pods and cordons a pod while using a YAML file to set up the StatefulSet, Pod, and PVC.
+
+### Important Notes
+
+- In case of errors, a timeout will activate, waiting for operations (e.g., 5 minutes for Pod creation, 10 minutes for StatefulSet).
+- Cleanup occurs after each test upon success.
+- Use `getEvents` for details and troubleshooting when needed.
+
+## Test Structure
+
+- The Ginkgo test suite is initialized in `suite_test.go` using `RunSpecs`.
+- `ginkgo.Describe` defines a suite of scenarios, covering both happy paths and error conditions.
+- `ginkgo.BeforeEach` specifies a setup method that runs before each test.

test/e2e-fsgroup/e2e-values.yaml

@@ -7,11 +7,10 @@ e2eCSIDriverName: "csi-vxflexos.dellemc.com"
 scParamStoragePoolKey: "storagepool"
 scParamStoragePoolValue: "sample"
 
-scParamFsTypeKey: "FsType"
+scParamFsTypeKey: "csi.storage.k8s.io/fstype"
 scParamFsTypeValue: "ext4"
 
 scParamStorageSystemKey: "systemID"
-
 scParamStorageSystemValue: "sample"
 
 diskSize: "8Gi"