Update buildah and c/common to latest

docs/source/markdown/podman-build.1.md.in

@@ -512,6 +512,16 @@ Suppress output messages which indicate which instruction is being processed,
 and of progress when pulling images from a registry, and when writing the
 output image.
 
+#### **--retry**=*attempts*
+
+Number of times to retry in case of failure when performing pull of
+images from registry. Default is **3**.
+
+#### **--retry-delay**=*duration*
+
+Duration of delay between retry attempts in case of failure when performing
+pull of images from registry. Default is **2s**.
+
 #### **--rm**
 
 Remove intermediate containers after a successful build (default true).

go.mod

@@ -11,13 +11,13 @@ require (
 	github.com/container-orchestrated-devices/container-device-interface v0.5.1
 	github.com/containernetworking/cni v1.1.2
 	github.com/containernetworking/plugins v1.1.1
-	github.com/containers/buildah v1.27.0
-	github.com/containers/common v0.49.2-0.20220826180622-c2dcb4e70340
+	github.com/containers/buildah v1.27.1-0.20220907121344-97a52b13bb27
+	github.com/containers/common v0.49.2-0.20220908074553-1a09baf471c4
 	github.com/containers/conmon v2.0.20+incompatible
-	github.com/containers/image/v5 v5.22.0
+	github.com/containers/image/v5 v5.22.1-0.20220907162003-651744379993
 	github.com/containers/ocicrypt v1.1.5
 	github.com/containers/psgo v1.7.3
-	github.com/containers/storage v1.42.0
+	github.com/containers/storage v1.42.1-0.20220909095216-b32188140319
 	github.com/coreos/go-systemd/v22 v22.3.2
 	github.com/coreos/stream-metadata-go v0.0.0-20210225230131-70edb9eb47b3
 	github.com/cyphar/filepath-securejoin v0.2.3
@@ -42,10 +42,10 @@ require (
 	github.com/moby/term v0.0.0-20210619224110-3f7ff695adc6
 	github.com/nxadm/tail v1.4.8
 	github.com/onsi/ginkgo v1.16.5
-	github.com/onsi/gomega v1.20.0
+	github.com/onsi/gomega v1.20.2
 	github.com/opencontainers/go-digest v1.0.0
 	github.com/opencontainers/image-spec v1.0.3-0.20220114050600-8b9d41f48198
-	github.com/opencontainers/runc v1.1.3
+	github.com/opencontainers/runc v1.1.4
 	github.com/opencontainers/runtime-spec v1.0.3-0.20211214071223-8958f93039ab
 	github.com/opencontainers/runtime-tools v0.9.1-0.20220714195903-17b3287fafb7
 	github.com/opencontainers/selinux v1.10.1
@@ -61,7 +61,7 @@ require (
 	github.com/vbauerster/mpb/v7 v7.5.2
 	github.com/vishvananda/netlink v1.1.1-0.20220115184804-dd687eb2f2d4
 	go.etcd.io/bbolt v1.3.6
-	golang.org/x/sync v0.0.0-20220601150217-0de741cfad7f
+	golang.org/x/sync v0.0.0-20220722155255-886fb9371eb4
 	golang.org/x/sys v0.0.0-20220823224334-20c2bfdbfe24
 	golang.org/x/term v0.0.0-20220526004731-065cf7ba2467
 	golang.org/x/text v0.3.7

test/buildah-bud/apply-podman-deltas

@@ -235,6 +235,10 @@ skip_if_remote "envariables do not automatically work with -remote." \
 skip_if_remote "FIXME FIXME FIXME: does this test make sense in remote?" \
                "build-test with OCI prestart hook"
 
+# 2022-08-17 buildah PR 4190
+skip_if_remote "Explicit request in buildah PR 4190 to skip this on remote" \
+               "build: test race in updating image name while performing parallel commits"
+
 ###############################################################################
 # BEGIN tests which are skipped due to actual podman or podman-remote bugs.
 

test/buildah-bud/buildah-tests.diff

@@ -1,4 +1,4 @@
-From 6508e3df2a129554fdf8336d8a6f0cdcc6fd4832 Mon Sep 17 00:00:00 2001
+From d22e44c8fb1c87afb90391188733f7ce8fea005d Mon Sep 17 00:00:00 2001
 From: Ed Santiago <[email protected]>
 Date: Tue, 9 Feb 2021 17:28:05 -0700
 Subject: [PATCH] tweaks for running buildah tests under podman
@@ -9,10 +9,10 @@ Signed-off-by: Ed Santiago <[email protected]>
  1 file changed, 67 insertions(+), 3 deletions(-)
 
 diff --git a/tests/helpers.bash b/tests/helpers.bash
-index e3087063..178a486e 100644
+index 8cb93c3a..72c1c797 100644
 --- a/tests/helpers.bash
 +++ b/tests/helpers.bash
-@@ -51,6 +51,23 @@ EOF
+@@ -52,6 +52,23 @@ EOF
      ROOTDIR_OPTS="--root ${TEST_SCRATCH_DIR}/root --runroot ${TEST_SCRATCH_DIR}/runroot --storage-driver ${STORAGE_DRIVER}"
      BUILDAH_REGISTRY_OPTS="--registries-conf ${TEST_SOURCES}/registries.conf --registries-conf-dir ${TEST_SCRATCH_DIR}/registries.d --short-name-alias-conf ${TEST_SCRATCH_DIR}/cache/shortnames.conf"
      PODMAN_REGISTRY_OPTS="--registries-conf ${TEST_SOURCES}/registries.conf"
@@ -36,7 +36,7 @@ index e3087063..178a486e 100644
  }
 
  function starthttpd() {
-@@ -94,6 +111,12 @@ function teardown_tests() {
+@@ -95,6 +112,12 @@ function teardown_tests() {
      stop_git_daemon
      stop_registry
 
@@ -49,7 +49,7 @@ index e3087063..178a486e 100644
      # Workaround for #1991 - buildah + overlayfs leaks mount points.
      # Many tests leave behind /var/tmp/.../root/overlay and sub-mounts;
      # let's find those and clean them up, otherwise 'rm -rf' fails.
-@@ -186,6 +209,10 @@ function podman() {
+@@ -187,6 +210,10 @@ function podman() {
      command ${PODMAN_BINARY:-podman} ${PODMAN_REGISTRY_OPTS} ${ROOTDIR_OPTS} "$@"
  }
 
@@ -60,7 +60,7 @@ index e3087063..178a486e 100644
  # There are various scenarios where we would like to execute `tests` as rootless user, however certain commands like `buildah mount`
  # do not work in rootless session since a normal user cannot mount a filesystem unless they're in a user namespace along with its
  # own mount namespace. In order to run such specific commands from a rootless session we must perform `buildah unshare`.
-@@ -247,8 +274,36 @@ function run_buildah() {
+@@ -248,8 +275,36 @@ function run_buildah() {
          --retry)         retry=3;        shift;;  # retry network flakes
      esac
 
@@ -98,7 +98,7 @@ index e3087063..178a486e 100644
 
      # If session is rootless and `buildah mount` is invoked, perform unshare,
      # since normal user cannot mount a filesystem unless they're in a user namespace along with its own mount namespace.
-@@ -262,8 +317,8 @@ function run_buildah() {
+@@ -263,8 +318,8 @@ function run_buildah() {
          retry=$(( retry - 1 ))
 
          # stdout is only emitted upon error; this echo is to help a debugger
@@ -109,7 +109,7 @@ index e3087063..178a486e 100644
          # without "quotes", multiple lines are glommed together into one
          if [ -n "$output" ]; then
              echo "$output"
-@@ -595,6 +650,15 @@ function skip_if_no_docker() {
+@@ -596,6 +651,15 @@ function skip_if_no_docker() {
    fi
  }
 
@@ -126,5 +126,5 @@ index e3087063..178a486e 100644
    daemondir=${TEST_SCRATCH_DIR}/git-daemon
    mkdir -p ${daemondir}/repo
 -- 
-2.35.3
+2.36.1
 

test/e2e/secret_test.go

@@ -200,27 +200,33 @@ var _ = Describe("Podman secret", func() {
 		list := podmanTest.Podman([]string{"secret", "ls", "--filter", fmt.Sprintf("name=%s", secret1)})
 		list.WaitWithDefaultTimeout()
 		Expect(list).Should(Exit(0))
-		Expect(list.OutputToStringArray()).To(HaveLen(2), ContainSubstring(secret1))
+		Expect(list.OutputToStringArray()).To(HaveLen(2))
+		Expect(list.OutputToStringArray()[1]).To(ContainSubstring(secret1))
 
 		list = podmanTest.Podman([]string{"secret", "ls", "--filter", fmt.Sprintf("name=%s", secret2)})
 		list.WaitWithDefaultTimeout()
 		Expect(list).Should(Exit(0))
-		Expect(list.OutputToStringArray()).To(HaveLen(2), ContainSubstring(secret2))
+		Expect(list.OutputToStringArray()).To(HaveLen(2))
+		Expect(list.OutputToStringArray()[1]).To(ContainSubstring(secret2))
 
 		list = podmanTest.Podman([]string{"secret", "ls", "--filter", fmt.Sprintf("id=%s", secrID1)})
 		list.WaitWithDefaultTimeout()
 		Expect(list).Should(Exit(0))
-		Expect(list.OutputToStringArray()).To(HaveLen(2), ContainSubstring(secrID1))
+		Expect(list.OutputToStringArray()).To(HaveLen(2))
+		Expect(list.OutputToStringArray()[1]).To(ContainSubstring(secrID1))
 
 		list = podmanTest.Podman([]string{"secret", "ls", "--filter", fmt.Sprintf("id=%s", secrID2)})
 		list.WaitWithDefaultTimeout()
 		Expect(list).Should(Exit(0))
-		Expect(list.OutputToStringArray()).To(HaveLen(2), ContainSubstring(secrID2))
+		Expect(list.OutputToStringArray()).To(HaveLen(2))
+		Expect(list.OutputToStringArray()[1]).To(ContainSubstring(secrID2))
 
 		list = podmanTest.Podman([]string{"secret", "ls", "--filter", fmt.Sprintf("name=%s,name=%s", secret1, secret2)})
 		list.WaitWithDefaultTimeout()
 		Expect(list).Should(Exit(0))
-		Expect(list.OutputToStringArray()).To(HaveLen(3), ContainSubstring(secret1), ContainSubstring(secret2))
+		Expect(list.OutputToStringArray()).To(HaveLen(3))
+		Expect(list.OutputToString()).To(ContainSubstring(secret1))
+		Expect(list.OutputToString()).To(ContainSubstring(secret2))
 	})
 
 	It("podman secret ls with Go template", func() {

test/system/150-login.bats

@@ -122,7 +122,7 @@ function setup() {
                --password-stdin \
                $registry <<< "x${PODMAN_LOGIN_PASS}"
     is "$output" \
-       "Error: error logging into \"$registry\": invalid username/password" \
+       "Error: logging into \"$registry\": invalid username/password" \
        'output from podman login'
 }