[nrfconnect] Support nRF52840 Dongle in all-clusters-app (project-chi…

…p#17215) * [nrfconnect] Support nRF52840 Dongle in all-clusters-app The dongle doesn't have external flash, so only build configurations without the DFU are supported. Also, due to flash size limitations (nR52840 dongle reserves some flash for an immutable bootloader), shell commands must have been disabled, too. By the way, make fixes in lighting-app which in theory already had the support for the nRF52840 Dongle, but it didn't work due to various issues. Signed-off-by: Damian Krolik <[email protected]> * Add new targets to build_examples.py * Fix build * Revert accidentally committed change
andrei-menzopol · Apr 14, 2022 · 54ae0c0 · 54ae0c0
1 parent fd26ea2
commit 54ae0c0
Show file tree

Hide file tree

Showing 16 changed files with 260 additions and 30 deletions.
diff --git a/examples/all-clusters-app/nrfconnect/CMakeLists.txt b/examples/all-clusters-app/nrfconnect/CMakeLists.txt
@@ -69,3 +69,7 @@ chip_configure_data_model(app
 if(CONFIG_CHIP_OTA_REQUESTOR)
     target_sources(app PRIVATE ${NRFCONNECT_COMMON}/util/OTAUtil.cpp)
 endif()
+
+if (CONFIG_SHELL AND BOARD STREQUAL "nrf52840dongle_nrf52840")
+  target_sources(app PRIVATE ${NRFCONNECT_COMMON}/util/DFUTrigger.cpp)
+endif()
diff --git a/examples/all-clusters-app/nrfconnect/README.md b/examples/all-clusters-app/nrfconnect/README.md
@@ -37,6 +37,8 @@ into an existing Matter network and can be controlled by this network.
 -   [Configuring the example](#configuring-the-example)
     -   [Example build types](#example-build-types)
 -   [Flashing and debugging](#flashing-and-debugging)
+    -   [Flashing on the development kits](#nrfdks_flashing)
+    -   [Flashing on the nRF52840 Dongle](#nrf52840dongle_flashing)
 -   [Testing the example](#testing-the-example)
     -   [Testing using CHIPTool](#testing-using-chiptool)
 
@@ -98,10 +100,11 @@ more information.
 
 The example supports building and running on the following devices:
 
-| Hardware platform                                                                         | Build target               | Platform image                                                                                                                                   |
-| ----------------------------------------------------------------------------------------- | -------------------------- | ------------------------------------------------------------------------------------------------------------------------------------------------ |
-| [nRF52840 DK](https://www.nordicsemi.com/Software-and-Tools/Development-Kits/nRF52840-DK) | `nrf52840dk_nrf52840`      | <details><summary>nRF52840 DK</summary><img src="../../platform/nrfconnect/doc/images/nRF52840_DK_info-medium.jpg" alt="nRF52840 DK"/></details> |
-| [nRF5340 DK](https://www.nordicsemi.com/Software-and-Tools/Development-Kits/nRF5340-DK)   | `nrf5340dk_nrf5340_cpuapp` | <details><summary>nRF5340 DK</summary><img src="../../platform/nrfconnect/doc/images/nRF5340_DK_info-medium.jpg" alt="nRF5340 DK"/></details>    |
+| Hardware platform                                                                                 | Build target               | Platform image                                                                                                                                          |
+| ------------------------------------------------------------------------------------------------- | -------------------------- | ------------------------------------------------------------------------------------------------------------------------------------------------------- |
+| [nRF52840 DK](https://www.nordicsemi.com/Software-and-Tools/Development-Kits/nRF52840-DK)         | `nrf52840dk_nrf52840`      | <details><summary>nRF52840 DK</summary><img src="../../platform/nrfconnect/doc/images/nRF52840_DK_info-medium.jpg" alt="nRF52840 DK"/></details>        |
+| [nRF5340 DK](https://www.nordicsemi.com/Software-and-Tools/Development-Kits/nRF5340-DK)           | `nrf5340dk_nrf5340_cpuapp` | <details><summary>nRF5340 DK</summary><img src="../../platform/nrfconnect/doc/images/nRF5340_DK_info-medium.jpg" alt="nRF5340 DK"/></details>           |
+| [nRF52840 Dongle](https://www.nordicsemi.com/Software-and-Tools/Development-Kits/nRF52840-Dongle) | `nrf52840dongle_nrf52840`  | <details><summary>nRF52840 Dongle</summary><img src="../../platform/nrfconnect/doc/images/nRF52840_Dongle-medium.jpg" alt="nRF52840 Dongle"/></details> |
 
 <hr>
 
@@ -113,6 +116,15 @@ This section lists the User Interface elements that you can use to control and
 monitor the state of the device. These correspond to PCB components on the
 platform image.
 
+> **Note**:
+>
+> The following Device UI elements are missing on the nRF52840 Dongle: **Button
+> 2**, **Button 3**, **Button 4**, **SEGGER J-Link USB port**, and **NFC port
+> with antenna attached**. You can collect logs from the nRF52840 Dongle using
+> the **nRF USB port** instead of the **SEGGER J-Link USB port**.
+> Functionalities associated with the remaining missing elements are
+> inaccessible.
+
 **LED 1** shows the overall state of the device and its connectivity. The
 following states are possible:
 
@@ -381,9 +393,11 @@ depending on the selected board:
     command-line shell.
 -   release -- Release version of the application - can be used to enable only
     the necessary application functionalities to optimize its performance. It
-    has Device Firmware Upgrade feature enabled.
+    has Device Firmware Upgrade feature enabled. It can be used only for the
+    nRF52840 DK and nRF5340 DK, as only those platforms support the DFU.
 -   dfu -- Debug version of the application with Device Firmware Upgrade feature
-    support.
+    support. It can be used only for the nRF52840 DK and nRF5340 DK, as only
+    those platforms support the DFU.
 
 For more information, see the
 [Configuring nRF Connect SDK examples](../../../docs/guides/nrfconnect_examples_configuration.md)
@@ -395,6 +409,13 @@ page.
 
 ## Flashing and debugging
 
+The flashing and debugging procedure is different for the development kits and
+the nRF52840 Dongle.
+
+<a name="nrfdks_flashing"></a>
+
+### Flashing on the development kits
+
 To flash the application to the device, use the west tool and run the following
 command from the example directory:
 
@@ -408,6 +429,14 @@ directory:
 
         $ west debug
 
+<a name="nrf52840dongle_flashing"></a>
+
+### Flashing on the nRF52840 Dongle
+
+Visit
+[Programming and Debugging nRF52840 Dongle](https://docs.zephyrproject.org/latest/boards/arm/nrf52840dongle_nrf52840/doc/index.html#programming-and-debugging)
+to read more about flashing on the nRF52840 Dongle.
+
 <hr>
 
 ## Testing the example

diff --git a/examples/all-clusters-app/nrfconnect/boards/nrf52840dongle_nrf52840.conf b/examples/all-clusters-app/nrfconnect/boards/nrf52840dongle_nrf52840.conf
@@ -0,0 +1,43 @@
+#
+#    Copyright (c) 2022 Project CHIP Authors
+#
+#    Licensed under the Apache License, Version 2.0 (the "License");
+#    you may not use this file except in compliance with the License.
+#    You may obtain a copy of the License at
+#
+#        http://www.apache.org/licenses/LICENSE-2.0
+#
+#    Unless required by applicable law or agreed to in writing, software
+#    distributed under the License is distributed on an "AS IS" BASIS,
+#    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+#    See the License for the specific language governing permissions and
+#    limitations under the License.
+#
+
+# Configure logging over USB
+# - do enable shell to reduce flash usage
+# - disable CDC ACM logs as it may lead to infinite loop when CDC ACM is used as the log backend
+CONFIG_USB_DEVICE_STACK=y
+CONFIG_CONSOLE=y
+CONFIG_UART_CONSOLE=y
+CONFIG_LOG_BACKEND_UART=y
+CONFIG_SHELL_LOG_BACKEND=n
+CONFIG_UART_LINE_CTRL=y
+CONFIG_USB_CDC_ACM_LOG_LEVEL_OFF=y
+
+# The minimal logging mode does not work properly with the USB CDC device, so use the deferred mode
+CONFIG_LOG_MODE_MINIMAL=n
+CONFIG_LOG2_MODE_DEFERRED=y
+CONFIG_LOG_BUFFER_SIZE=8192
+
+# Reduce the code size as the dongle reserves some space for MBR and Open Bootloader
+CONFIG_ASSERT_VERBOSE=n
+CONFIG_SHELL=n
+CONFIG_OPENTHREAD_SHELL=n
+CONFIG_MATTER_LOG_LEVEL_INF=y
+
+# Use partition manager to configure the settings partition not to overlap with Open Bootloader
+CONFIG_PM_SINGLE_IMAGE=y
+
+# Enable CHIP pairing automatically on application start.
+CONFIG_CHIP_ENABLE_PAIRING_AUTOSTART=y
diff --git a/examples/all-clusters-app/nrfconnect/boards/nrf52840dongle_nrf52840.overlay b/examples/all-clusters-app/nrfconnect/boards/nrf52840dongle_nrf52840.overlay
@@ -0,0 +1,28 @@
+/*
+ *    Copyright (c) 2021 Project CHIP Authors
+ *
+ *    Licensed under the Apache License, Version 2.0 (the "License");
+ *    you may not use this file except in compliance with the License.
+ *    You may obtain a copy of the License at
+ *
+ *        http: //www.apache.org/licenses/LICENSE-2.0
+ *
+ *    Unless required by applicable law or agreed to in writing, software
+ *    distributed under the License is distributed on an "AS IS" BASIS,
+ *    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *    See the License for the specific language governing permissions and
+ *    limitations under the License.
+ */
+
+ / {
+ 	chosen {
+ 		zephyr,console = &cdc_acm_uart0;
+		};
+};
+
+&zephyr_udc0 {
+	cdc_acm_uart0: cdc_acm_uart0 {
+		compatible = "zephyr,cdc-acm-uart";
+		label = "CDC_ACM_0";
+	};
+};
diff --git a/examples/all-clusters-app/nrfconnect/main/main.cpp b/examples/all-clusters-app/nrfconnect/main/main.cpp
@@ -19,13 +19,51 @@
 
 #include <logging/log.h>
 
+#if DT_NODE_HAS_COMPAT(DT_CHOSEN(zephyr_console), zephyr_cdc_acm_uart)
+#include <drivers/uart.h>
+#include <usb/usb_device.h>
+#endif
+
 LOG_MODULE_REGISTER(app, CONFIG_MATTER_LOG_LEVEL);
 
 using namespace ::chip;
 
+#if DT_NODE_HAS_COMPAT(DT_CHOSEN(zephyr_console), zephyr_cdc_acm_uart)
+static int InitUSB()
+{
+    int err = usb_enable(nullptr);
+
+    if (err)
+    {
+        LOG_ERR("Failed to initialize USB device");
+        return err;
+    }
+
+    const struct device * dev = DEVICE_DT_GET(DT_CHOSEN(zephyr_console));
+    uint32_t dtr              = 0;
+
+    while (!dtr)
+    {
+        uart_line_ctrl_get(dev, UART_LINE_CTRL_DTR, &dtr);
+        k_sleep(K_MSEC(100));
+    }
+
+    return 0;
+}
+#endif
+
 int main()
 {
-    CHIP_ERROR err = AppTask::Instance().StartApp();
+    CHIP_ERROR err = CHIP_NO_ERROR;
+
+#if DT_NODE_HAS_COMPAT(DT_CHOSEN(zephyr_console), zephyr_cdc_acm_uart)
+    err = System::MapErrorZephyr(InitUSB());
+#endif
+
+    if (err == CHIP_NO_ERROR)
+    {
+        err = AppTask::Instance().StartApp();
+    }
 
     LOG_ERR("Exited with code %" CHIP_ERROR_FORMAT, err.Format());
     return err == CHIP_NO_ERROR ? EXIT_SUCCESS : EXIT_FAILURE;

diff --git a/examples/all-clusters-app/nrfconnect/pm_static_nrf52840dongle_nrf52840.yml b/examples/all-clusters-app/nrfconnect/pm_static_nrf52840dongle_nrf52840.yml
@@ -0,0 +1,8 @@
+settings_storage:
+    address: 0xd8000
+    size: 0x8000
+    region: flash_primary
+open_bootloader:
+    address: 0xe0000
+    size: 0x20000
+    region: flash_primary
diff --git a/examples/lighting-app/nrfconnect/CMakeLists.txt b/examples/lighting-app/nrfconnect/CMakeLists.txt
@@ -78,7 +78,7 @@ if(CONFIG_MCUMGR_SMP_BT)
     target_sources(app PRIVATE ${NRFCONNECT_COMMON}/util/DFUOverSMP.cpp)
 endif()
 
-if (BOARD STREQUAL "nrf52840dongle_nrf52840")
+if (CONFIG_SHELL AND BOARD STREQUAL "nrf52840dongle_nrf52840")
   target_sources(app PRIVATE ${NRFCONNECT_COMMON}/util/DFUTrigger.cpp)
 endif()
 

diff --git a/examples/lighting-app/nrfconnect/boards/nrf52840dongle_nrf52840.overlay b/examples/lighting-app/nrfconnect/boards/nrf52840dongle_nrf52840.overlay
@@ -5,7 +5,7 @@
  *    you may not use this file except in compliance with the License.
  *    You may obtain a copy of the License at
  *
- *        http://www.apache.org/licenses/LICENSE-2.0
+ *        http: //www.apache.org/licenses/LICENSE-2.0
  *
  *    Unless required by applicable law or agreed to in writing, software
  *    distributed under the License is distributed on an "AS IS" BASIS,
@@ -14,9 +14,9 @@
  *    limitations under the License.
  */
 
-/ {
-	chosen {
-		zephyr,shell-uart = &cdc_acm_uart0;
+ / {
+ 	chosen {
+ 		zephyr,console = &cdc_acm_uart0;
 	};
 };
 

diff --git a/examples/lighting-app/nrfconnect/boards/nrf52840dongle_nrf52840_no_dfu.conf b/examples/lighting-app/nrfconnect/boards/nrf52840dongle_nrf52840_no_dfu.conf
@@ -14,14 +14,26 @@
 #    limitations under the License.
 #
 
-# Configure shell and logging over USB
+# Configure logging over USB
+# - do enable shell to reduce flash usage
+# - disable CDC ACM logs as it may lead to infinite loop when CDC ACM is used as the log backend
 CONFIG_USB_DEVICE_STACK=y
-CONFIG_UART_INTERRUPT_DRIVEN=y
+CONFIG_CONSOLE=y
+CONFIG_UART_CONSOLE=y
+CONFIG_LOG_BACKEND_UART=y
+CONFIG_SHELL_LOG_BACKEND=n
 CONFIG_UART_LINE_CTRL=y
-CONFIG_SHELL_BACKEND_SERIAL_INIT_PRIORITY=51
+CONFIG_USB_CDC_ACM_LOG_LEVEL_OFF=y
 
 # The minimal logging mode does not work properly with the USB CDC device, so use the deferred mode
 CONFIG_LOG_MODE_MINIMAL=n
-CONFIG_LOG_MODE_DEFERRED=y
-CONFIG_LOG_STRDUP_MAX_STRING=128
-CONFIG_LOG_STRDUP_BUF_COUNT=24
+CONFIG_LOG2_MODE_DEFERRED=y
+CONFIG_LOG_BUFFER_SIZE=8192
+
+# Reduce the code size as the dongle reserves some space for MBR and Open Bootloader
+CONFIG_ASSERT_VERBOSE=n
+CONFIG_SHELL=n
+CONFIG_OPENTHREAD_SHELL=n
+
+# Use partition manager to configure the settings partition not to overlap with Open Bootloader
+CONFIG_PM_SINGLE_IMAGE=y
diff --git a/examples/lighting-app/nrfconnect/main/main.cpp b/examples/lighting-app/nrfconnect/main/main.cpp
@@ -26,14 +26,39 @@
 #include "Rpc.h"
 #endif
 
-#ifdef CONFIG_USB_DEVICE_STACK
+#if DT_NODE_HAS_COMPAT(DT_CHOSEN(zephyr_console), zephyr_cdc_acm_uart)
+#include <drivers/uart.h>
 #include <usb/usb_device.h>
 #endif
 
 LOG_MODULE_REGISTER(app, CONFIG_MATTER_LOG_LEVEL);
 
 using namespace ::chip;
 
+#if DT_NODE_HAS_COMPAT(DT_CHOSEN(zephyr_console), zephyr_cdc_acm_uart)
+static int InitUSB()
+{
+    int err = usb_enable(nullptr);
+
+    if (err)
+    {
+        LOG_ERR("Failed to initialize USB device");
+        return err;
+    }
+
+    const struct device * dev = DEVICE_DT_GET(DT_CHOSEN(zephyr_console));
+    uint32_t dtr              = 0;
+
+    while (!dtr)
+    {
+        uart_line_ctrl_get(dev, UART_LINE_CTRL_DTR, &dtr);
+        k_sleep(K_MSEC(100));
+    }
+
+    return 0;
+}
+#endif
+
 int main()
 {
     CHIP_ERROR err = CHIP_NO_ERROR;
@@ -42,12 +67,8 @@ int main()
     rpc::Init();
 #endif
 
-#ifdef CONFIG_USB_DEVICE_STACK
-    err = System::MapErrorZephyr(usb_enable(nullptr));
-    if (err != CHIP_NO_ERROR)
-    {
-        LOG_ERR("Failed to initialize USB device");
-    }
+#if DT_NODE_HAS_COMPAT(DT_CHOSEN(zephyr_console), zephyr_cdc_acm_uart)
+    err = System::MapErrorZephyr(InitUSB());
 #endif
 
     if (err == CHIP_NO_ERROR)

diff --git a/examples/lighting-app/nrfconnect/pm_static_nrf52840dongle_nrf52840_no_dfu.yml b/examples/lighting-app/nrfconnect/pm_static_nrf52840dongle_nrf52840_no_dfu.yml
@@ -0,0 +1,8 @@
+settings_storage:
+    address: 0xd8000
+    size: 0x8000
+    region: flash_primary
+open_bootloader:
+    address: 0xe0000
+    size: 0x20000
+    region: flash_primary
diff --git a/scripts/build/build/targets.py b/scripts/build/build/targets.py
@@ -382,10 +382,12 @@ def NrfTargets():
         target.Extend('nrf52840dk', board=NrfBoard.NRF52840DK),
     ]
 
-    # Enable nrf52840dongle for lighting app only
+    # Enable nrf52840dongle for all-clusters and lighting app only
+    yield target.Extend('nrf52840dongle-all-clusters', board=NrfBoard.NRF52840DONGLE, app=NrfApp.ALL_CLUSTERS)
     yield target.Extend('nrf52840dongle-light', board=NrfBoard.NRF52840DONGLE, app=NrfApp.LIGHT)
 
     for target in targets:
+        yield target.Extend('all-clusters', app=NrfApp.ALL_CLUSTERS)
         yield target.Extend('lock', app=NrfApp.LOCK)
         yield target.Extend('light', app=NrfApp.LIGHT)
         yield target.Extend('shell', app=NrfApp.SHELL)