rp122_hermes

This example shows a single Red Pitaya 122.88-16 used with Pavel's software, which emulates two Hermes receivers with 8 slices each.

Here, both receivers are configured with 5 slices, but this may be increased to 8, for a total of 16.

Note that interface is set to hermes and each receiver has a unique receiver-id.

The MAC address of each receiver is specified under options. To discover the MAC addresses of each receiver, run: CWSL_DIGI.exe --discover

receivers:

    - receiver-id: 2
      description: RP
      interface: hermes
      slices:
         - {frequency: 1891000}
         - {frequency: 3591000}
         - {frequency: 5357000}
         - {frequency: 7074000}
         - {frequency: 10136000}
        
      options:
        samplerate: 192000
        mac: 00:26:32:f0:81:3d

      decoders:
   
        # 30m
        
         - {frequency: 10140000, mode: FT4 }
         - {frequency: 10138700, mode: WSPR }
         - {frequency: 10136000, mode: FT8 }
         - {frequency: 10131000, mode: FT8 }
        
        # 40m
        
         - {frequency: 7047500, mode: FT4 }
         - {frequency: 7075000, mode: FT8 }
         - {frequency: 7074000, mode: FT8 }
         - {frequency: 7038600, mode: WSPR }
         - {frequency: 7078000, mode: JS8 }
         
        # 60m
        
         - {frequency: 5357000, mode: FT8 }
         
        # 80m
        
         - {frequency: 3575000, mode: FT4 }
         - {frequency: 3573000, mode: FT8 }
         - {frequency: 3567000, mode: FT8 }
         - {frequency: 3547000, mode: FT8 }
         - {frequency: 3532000, mode: FT8 }
         - {frequency: 3568600, mode: WSPR }
         - {frequency: 3578000, mode: JS8 }

        # 160m
        
         - {frequency: 1840000, mode: FT8 }


         
    - receiver-id: 3
      description: RP
      interface: hermes
      slices:
         - {frequency: 14074000}
         - {frequency: 18100000}
         - {frequency: 21092000}
         - {frequency: 24915000}
         - {frequency: 28092000}
         
      options:
        samplerate: 192000
        mac: 00:26:32:f0:ff:3d

      decoders:
   
        # 10m
         - {frequency: 28074000, mode: FT8 }
      
        # 12m
         - {frequency: 24915000, mode: FT8 }

      
        # 15m
         - {frequency: 21074000, mode: FT8 }

        # 17m
         - {frequency: 18100000, mode: FT8 }
      
        # 20m
        
         - {frequency: 14095600, mode: WSPR }
         - {frequency: 14090000, mode: FT8 }
         - {frequency: 14080000, mode: FT4 }
         - {frequency: 14074000, mode: FT8 }