Add Makerfabs (#844)

Co-authored-by: Johan Stokking <[email protected]>

vendor/index.yaml

@@ -2102,3 +2102,6 @@ vendors:
     website: https://www.infrafon.com/
     social:
       linkedin: https://de.linkedin.com/company/infrafon
+
+  - id: makerfabs
+    name: AgroSense

vendor/makerfabs/ath20-codec.yaml

@@ -0,0 +1,61 @@
+# Uplink decoder decodes binary data uplink into a JSON object (optional)
+# For documentation on writing encoders and decoders, see: https://www.thethingsindustries.com/docs/integrations/payload-formatters/javascript/
+uplinkDecoder:
+  fileName: ath20.js
+  # Examples (optional)
+  examples:
+    - description: Temperature
+      input:
+        fPort: 2
+        bytes: [0x00, 0x01, 0x1F, 0x02, 0x0B, 0x01, 0x32, 0x00, 0x00, 0x00, 0x01]
+      output:
+        data: { 'Bat': 3.1, 'Humi': 52.3, 'Temp': 30.6 }
+    #   # Normalized output, uses the normalizeUplink function (optional)
+    #   normalizedOutput:
+    #     data:
+    #       - air:
+    #           location: 'indoor'
+    #           temperature: 30.6
+    #           relativeHumidity: 52.3
+    #       - air:
+    #           location: 'outdoor'
+    #           temperature: 27.81
+    #         battery: 3.062
+
+    # - description: Unknown FPort
+    #   input:
+    #     fPort: 42
+    #     bytes: [0x00, 0x01, 0x1F, 0x02, 0x0B, 0x01, 0x32, 0x00, 0x00, 0x00, 0x01]
+    #   output:
+    #     errors:
+    #       - unknown FPort
+
+# Downlink encoder encodes JSON object into a binary data downlink (optional)
+downlinkEncoder:
+  fileName: ath20.js
+  examples:
+    - description: Change Reporting interval
+      input:
+        data:
+          minutes: 10
+      output:
+        bytes: [0x00, 0x00, 0x02, 0x58]
+        fPort: 1
+    # - description: Invalid color
+    #   input:
+    #     data:
+    #       led: blue
+    #   output:
+    #     errors:
+    #       - invalid LED color
+# # Downlink decoder decodes the encoded downlink message (optional, must be symmetric with downlinkEncoder)
+# downlinkDecoder:
+#   fileName: Air-Temperature-and-Humidity-Sensor.js
+#   examples:
+#     - description: Turn green
+#       input:
+#         fPort: 2
+#         bytes: [1]
+#       output:
+#         data:
+#           led: green

vendor/makerfabs/ath20.js

@@ -0,0 +1,54 @@
+function decodeUplink(input) {
+
+    // var num = input.bytes[0] * 256 + input.bytes[1]
+    var bat = input.bytes[2] / 10.0
+    var humi = (input.bytes[3] * 256 + input.bytes[4]) / 10.0
+    // var temp = (input.bytes[5] * 256 + input.bytes[6] ) / 10.0
+
+    var temp = input.bytes[5] * 256 + input.bytes[6]
+    if (temp >= 0x8000) {
+        temp -= 0x10000;
+    }
+    temp = temp / 10.0
+
+
+    return {
+        data: {
+            Bat: bat,
+            Humi: humi,
+            Temp: temp,
+        },
+
+    };
+}
+
+
+
+// Encoder function to be used in the TTN console for downlink payload
+function encodeDownlink(input) {
+    var minutes = input.data.minutes;
+
+    // Converting minutes to seconds
+    var seconds = minutes * 60;
+
+    // If the number of seconds is less than 300 seconds, set it to 300 seconds
+    if (seconds < 300) {
+        seconds = 300;
+    }
+    var bytes1 = (seconds >> 24) & 0xFF;
+    var bytes2 = (seconds >> 16) & 0xFF;
+    var bytes3 = (seconds >> 8) & 0xFF; 
+    var bytes4 = seconds & 0xFF;
+
+    // var payload = [
+    //     (seconds >> 24) & 0xFF,
+    //     (seconds >> 16) & 0xFF,
+    //     (seconds >> 8) & 0xFF,
+    //     seconds & 0xFF
+    // ];
+
+    return {        
+        bytes: [bytes1,bytes2,bytes3,bytes4],
+        fPort: 1,
+    };
+}

vendor/makerfabs/ath20.yaml

@@ -0,0 +1,109 @@
+name: ath20 - air-temperature-and-humidity-sensor # Device name can not contain the vendor name
+description: LoRaWAN Temperature & Humidity sensor
+
+# Hardware versions (optional, use when you have revisions)
+hardwareVersions:
+  - version: '1.0'
+    numeric: 1
+
+# Firmware versions (at least one is mandatory)
+firmwareVersions:
+  - # Firmware version
+    version: '2.0'
+    numeric: 1
+
+    # Corresponding hardware versions (optional)
+    hardwareVersions:
+      - '1.0'
+
+    # # Firmware features (optional)
+    # # Valid values are: remote rejoin (trigger a join from the application layer), transmission interval (configure how
+    # # often he device sends a message).
+    # features:
+    #   - remote rejoin
+    #   - transmission interval
+
+    # LoRaWAN Device Profiles per region
+    # Supported regions are EU863-870, US902-928, AU915-928, AS923, CN779-787, EU433, CN470-510, KR920-923, IN865-867,
+    # RU864-870
+    profiles:
+      EU863-870:
+        # # Optional identifier of the vendor of the profile. When you specify the vendorID, the profile is loaded from
+        # # the vendorID's folder. This allows you to reuse profiles from module or LoRaWAN end device stack vendors.
+        # # If vendorID is empty, the current vendor ID is used. In this example, the vendorID is the current vendor ID,
+        # # which is verbose.
+        # vendorID: example
+        # Identifier of the profile (lowercase, alphanumeric with dashes, max 36 characters)
+        id: eu868-profile
+        lorawanCertified: true
+        codec: ath20-codec
+      US902-928:
+        id: us915-profile
+        lorawanCertified: true
+        codec: ath20-codec
+
+  # - # You can add more firmware versions and use different profiles per version
+  #   version: '2.0'
+  #   numeric: 2
+  #   hardwareVersions:
+  #     - '1.0-rev-A'
+  #   profiles:
+  #     EU863-870:
+  #       id: windsensor-profile
+  #       lorawanCertified: true
+  #       codec: windsensor-codec
+  #     US902-928:
+  #       id: windsensor-profile
+  #       lorawanCertified: true
+  #       codec: windsensor-codec
+  #     AS923:
+  #       id: windsensor-profile
+  #       codec: windsensor-codec
+
+# Sensors that this device features (optional)
+# Valid values are:
+# 4-20 ma, accelerometer, altitude, analog input, auxiliary, barometer, battery, button, bvoc, co, co2, conductivity, current, digital input,
+# digital output, dissolved oxygen, distance, dust, energy, gps, gyroscope, h2s, hall effect, humidity, iaq, infrared, leaf wetness, level,
+# light, lightning, link, magnetometer, moisture, motion, nfc, no, no2, o3, occupancy, optical meter, particulate matter, ph, pir,
+# pm2.5, pm10, potentiometer, power, precipitation, pressure, proximity, pulse count, pulse frequency, radar, rainfall, reed switch, rssi,
+# sap flow, smart valve, smoke, snr, so2, solar radiation, sound, strain, surface temperature, switch, temperature, tilt, time, turbidity,
+# tvoc, uv, vapor pressure, velocity, vibration, voltage, water potential, water, weight, wifi ssid, wind direction, wind speed.
+sensors:
+  - temperature
+  - humidity
+
+# Operating conditions (optional)
+operatingConditions:
+  # Temperature (Celsius)
+  temperature:
+    min: -40
+    max: 85
+  # Relative humidity (fraction of 1)
+  relativeHumidity:
+    min: 0
+    max: 1
+
+# # IP rating (optional)
+# ipCode: IP68
+
+# Product and data sheet URLs (optional)
+productURL: https://www.agrosense.cc/pd.jsp?recommendFromPid=0&id=6&fromMid=366
+dataSheetURL: https://github.com/Makerfabs/Agrosense-Decoder/blob/main/AgroSense%20LoRaWAN%40%20Sensor%20Catalogue_V1.0.pdf
+
+# Commercial information
+sellerURLs:
+  - name: 'makerfabs'
+    region: # valid regions are: Argentina, Australia, Brazil, Canada, China, European Union, India, Indonesia.
+      # Japan, Mexico, Russia, Saudi Arabia, South Africa, South Korea, Turkey, United States, United Kingdom, Other
+      - china
+    url: http://www.makerfabs.com/
+
+# Photos
+photos:
+  main: ath20.jpg # Image needs to have a transparent background
+  # other:
+  #   - windsensor-package.png # Image needs to have a transparent background
+
+# Youtube or Vimeo Video (optional)
+videos:
+  main: https://www.youtube.com/watch?v=SXF6HpzQwL0

vendor/makerfabs/eu868-profile.yaml

@@ -0,0 +1,47 @@
+# LoRaWAN MAC version: 1.0, 1.0.1, 1.0.2, 1.0.3, 1.0.4 or 1.1
+macVersion: '1.0.3'
+# LoRaWAN Regional Parameters version. Values depend on the LoRaWAN version:
+#   1.0:   TS001-1.0
+#   1.0.1: TS001-1.0.1
+#   1.0.2: RP001-1.0.2 or RP001-1.0.2-RevB
+#   1.0.3: RP001-1.0.3-RevA
+#   1.0.4: RP002-1.0.0 or RP002-1.0.1
+#   1.1:   RP001-1.1-RevA or RP001-1.1-RevB
+regionalParametersVersion: 'RP001-1.0.3-RevA'
+
+# Whether the end device supports join (OTAA) or not (ABP)
+supportsJoin: true
+# If your device is an ABP device (supportsJoin is false), uncomment the following fields:
+# RX1 delay
+#rx1Delay: 5
+# RX1 data rate offset
+#rx1DataRateOffset: 0
+# RX2 data rate index
+#rx2DataRateIndex: 0
+# RX2 frequency (MHz)
+#rx2Frequency: 869.525
+# Factory preset frequencies (MHz)
+#factoryPresetFrequencies: [868.1, 868.3, 868.5, 867.1, 867.3, 867.5, 867.7, 867.9]
+
+# Maximum EIRP
+maxEIRP: 16
+# Whether the end device supports 32-bit frame counters
+supports32bitFCnt: true
+
+# Whether the end device supports class B
+supportsClassB: false
+# If your device supports class B, uncomment the following fields:
+# Maximum delay for the end device to answer a MAC request or confirmed downlink frame (seconds)
+#classBTimeout: 60
+# Ping slot period (seconds)
+#pingSlotPeriod: 128
+# Ping slot data rate index
+#pingSlotDataRateIndex: 0
+# Ping slot frequency (MHz). Set to 0 if the band supports ping slot frequency hopping.
+#pingSlotFrequency: 869.525
+
+# Whether the end device supports class C
+supportsClassC: false
+# If your device supports class C, uncomment the following fields:
+# Maximum delay for the end device to answer a MAC request or confirmed downlink frame (seconds)
+#classCTimeout: 60

vendor/makerfabs/index.yaml

@@ -0,0 +1,2 @@
+endDevices:
+  - ath20

vendor/makerfabs/us915-profile.yaml

@@ -0,0 +1,47 @@
+# LoRaWAN MAC version: 1.0, 1.0.1, 1.0.2, 1.0.3, 1.0.4 or 1.1
+macVersion: 1.0.3
+# LoRaWAN Regional Parameters version. Values depend on the LoRaWAN version:
+#   1.0:   TS001-1.0
+#   1.0.1: TS001-1.0.1
+#   1.0.2: RP001-1.0.2 or RP001-1.0.2-RevB
+#   1.0.3: RP001-1.0.3-RevA
+#   1.0.4: RP002-1.0.0 or RP002-1.0.1
+#   1.1:   RP001-1.1-RevA or RP001-1.1-RevB
+regionalParametersVersion: RP001-1.0.3-RevA
+
+# Whether the end device supports join (OTAA) or not (ABP)
+supportsJoin: true
+# If your device is an ABP device (supportsJoin is false), uncomment the following fields:
+# RX1 delay
+#rx1Delay: 5
+# RX1 data rate offset
+#rx1DataRateOffset: 0
+# RX2 data rate index
+#rx2DataRateIndex: 0
+# RX2 frequency (MHz)
+#rx2Frequency: 869.525
+# Factory preset frequencies (MHz)
+#factoryPresetFrequencies: [868.1, 868.3, 868.5, 867.1, 867.3, 867.5, 867.7, 867.9]
+
+# Maximum EIRP
+maxEIRP: 20
+# Whether the end device supports 32-bit frame counters
+supports32bitFCnt: true
+
+# Whether the end device supports class B
+supportsClassB: false
+# If your device supports class B, uncomment the following fields:
+# Maximum delay for the end device to answer a MAC request or confirmed downlink frame (seconds)
+#classBTimeout: 60
+# Ping slot period (seconds)
+#pingSlotPeriod: 128
+# Ping slot data rate index
+#pingSlotDataRateIndex: 0
+# Ping slot frequency (MHz). Set to 0 if the band supports ping slot frequency hopping.
+#pingSlotFrequency: 869.525
+
+# Whether the end device supports class C
+supportsClassC: false
+# If your device supports class C, uncomment the following fields:
+# Maximum delay for the end device to answer a MAC request or confirmed downlink frame (seconds)
+classCTimeout: 60