Release v8.4

.build/images/OdroidC1/boot.ini

@@ -0,0 +1,95 @@
+ODROIDC-UBOOT-CONFIG
+
+# HDMI resolution
+# - Exactly one line needs to be uncommented!
+#setenv m "vga"          	# 640x480
+#setenv m "480p"         	# 720x480
+#setenv m "576p"         	# 720x576
+#setenv m "800x480p60hz" 	# 800x480
+#setenv m "800x600p60hz" 	# 800x600
+#setenv m "1024x600p60hz"	# 1024x600
+#setenv m "1024x768p60hz"	# 1024x768
+#setenv m "1360x768p60hz"	# 1360x768
+#setenv m "1440x900p60hz"	# 1440x900
+#setenv m "1600x900p60hz"	# 1600x900
+#setenv m "1680x1050p60hz"	# 1680x1050
+#setenv m "720p"         	# 720p 1280x720
+#setenv m "800p"         	# 1280x800
+#setenv m "sxga"         	# 1280x1024
+#setenv m "1080i50hz"    	# 1080I@50Hz
+#setenv m "1080p24hz"    	# 1080P@24Hz
+#setenv m "1080p50hz"    	# 1080P@50Hz
+setenv m "1080p"         	# 1080P@60Hz
+#setenv m "1920x1200"    	# 1920x1200
+
+# HDMI/DVI selection: "hdmi" or "dvi"
+# - DVI mode disables HDMI sound
+setenv vout "hdmi"
+
+# HDMI BPP Mode: "32", "24" or "12"
+setenv m_bpp "32"
+
+# Monitor output: "true" or "false"
+# - Controls if HDMI PHY should output anything to the monitor
+setenv monitor_onoff "true"
+
+# HDMI Hot Plug detection
+# - "0" disables auto-detection and forces HDMI output.
+# - "1" enables HDMI detection based on cable connection (default).
+#setenv hpd "0"
+
+# CEC (requires hardware modification)
+# - "0" disables HDMI CEC (default).
+# - "1" enables HDMI CEC.
+#setenv cec "0"
+
+# PCM5102 I2S Audio DAC
+# - PCM5102 is an I2S Audio DAC addon board for ODROID-C1+
+# - Uncomment the line below to __ENABLE__ support for this addon board.
+#setenv enabledac "enabledac"
+
+# UHS Card Configuration
+# - Uncomment the line below to __DISABLE__ UHS-1 Micro SD support
+# - This might break boot for some brand models of cards.
+#setenv disableuhs "disableuhs"
+
+
+# Disable VPU (Video decoding engine, saves RAM!!!)
+# - 0 = disabled
+# - 1 = enabled (default)
+#setenv vpu "1"
+
+# Disable HDMI Output (Again, saves RAM!)
+# - 0 = disabled
+# - 1 = enabled (default)
+#setenv hdmioutput "1"
+
+# Default Console Device Setting
+setenv condev "console=ttyAML0,115200n8 console=tty1"
+
+# ODROID-VU7 touchscreen: "false" or "true", defaults to "true"
+#setenv disable_vu7 "false"
+
+# CPU Max Frequency: 96 192 312 408 504 600 720 816 1008 1200 1320 1488 1536 1632 1728 or 1824
+setenv max_freq "1536"
+
+### DO NOT EDIT ANYTHING BELOW THIS LINE ###
+
+if test "${hpd}" = "0"; then setenv hdmi_hpd "disablehpd=true"; fi
+if test "${cec}" = "1"; then setenv hdmi_cec "hdmitx=cecf"; fi
+if test "${disable_vu7}" = "false"; then setenv hid_quirks "usbhid.quirks=0x0eef:0x0005:0x0004"; fi
+
+# Boot arguments
+setenv bootargs "root=UUID=0ae78c3b-9579-4a13-8b2d-58ad222f2ca6 rootfstype=ext4 rootwait rw ${condev} loglevel=4 no_console_suspend consoleblank=0 vdaccfg=0xa000 dmfc=3 cvbsmode=576cvbs hdmimode=${m} m_bpp=${m_bpp} vout=${vout} ${disableuhs} ${hdmi_hpd} ${hdmi_cec} ${enabledac} monitor_onoff=${monitor_onoff} max_freq=${max_freq} ${hid_quirks} ${extraargs}"
+
+# Booting
+fatload mmc 0:1 0x20800000 uImage
+fatload mmc 0:1 0x22000000 uInitrd
+fatload mmc 0:1 0x21800000 dtb/meson8b-odroidc1.dtb
+
+fdt addr 21800000
+
+if test "${vpu}" = "0"; then fdt rm /mesonstream; fdt rm /vdec; fdt rm /ppmgr; fi
+if test "${hdmioutput}" = "0"; then fdt rm /mesonfb; fi
+
+bootm 0x20800000 0x22000000 0x21800000

.build/images/OdroidXU4/boot.ini

@@ -0,0 +1,220 @@
+ODROIDXU-UBOOT-CONFIG
+
+# U-Boot parameters
+setenv initrd_high "0xffffffff"
+setenv fdt_high "0xffffffff"
+
+# MAC address configuration
+setenv macaddr "00:1e:06:61:7a:72"
+
+# Kernel command-line parameters
+setenv bootrootfs "root=UUID=e139ce78-9841-40fe-8823-96a304a09859 rootwait ro console=ttySAC2,115200n8 console=tty1 consoleblank=0 fsck.repair=yes net.ifnames=0"
+
+# HDMI/DVI selection: "hdmi" or "dvi"
+# - DVI mode disables HDMI sound
+setenv vout "hdmi"
+
+# HDMI Hot Plug detection: "false" or "true"
+# - "true" enables HDMI detection based on cable connection.
+# - "false" disables auto-detection and forces HDMI output.
+setenv HPD "true"
+
+# HDMI CEC: "false" or "true", defaults to "true"
+#setenv cecenable "false"
+
+# HDMI resolution
+# - Uncomment only ONE line! Leave all commented for automatic selection.
+# - Uncomment only the setenv line!
+# -----------------------------------------------
+# ODROID-VU forced resolution
+#setenv videoconfig "video=HDMI-A-1:1280x800@60"
+# -----------------------------------------------
+# ODROID-VU forced EDID
+#setenv videoconfig "drm_kms_helper.edid_firmware=edid/1280x800.bin"
+# -----------------------------------------------
+# 1920x1200 60hz without monitor data using generic information
+#setenv videoconfig "drm_kms_helper.edid_firmware=edid/1920x1200_60hz.bin"
+# -----------------------------------------------
+# 1920x1200 30hz without monitor data using generic information
+#setenv videoconfig "drm_kms_helper.edid_firmware=edid/1920x1200_30hz.bin"
+# -----------------------------------------------
+# 1920x1080 (1080P) with monitor provided EDID information. (1080p-edid)
+#setenv videoconfig "video=HDMI-A-1:1920x1080@60"
+# -----------------------------------------------
+# 1920x1080 (1080P) without monitor data using generic information (1080p-noedid)
+#setenv videoconfig "drm_kms_helper.edid_firmware=edid/1920x1080.bin"
+# -----------------------------------------------
+# 1920x1080 50hz (1080P) with monitor provided EDID information. (1080p 50hz-edid)
+#setenv videoconfig "video=HDMI-A-1:1920x1080@50"
+# -----------------------------------------------
+# 1920x1080 50hz (1080P) without monitor data using generic information (1080p 50hz-noedid)
+#setenv videoconfig "drm_kms_helper.edid_firmware=edid/1920x1080_50hz.bin"
+# -----------------------------------------------
+# 1920x800 60hz without monitor data using generic information
+#setenv videoconfig "drm_kms_helper.edid_firmware=edid/1920x800.bin"
+# -----------------------------------------------
+# 1792x1344 60hz without monitor data using generic information
+#setenv videoconfig "drm_kms_helper.edid_firmware=edid/1792x1344.bin"
+# -----------------------------------------------
+# 1680x1050 without monitor data using generic information
+#setenv videoconfig "drm_kms_helper.edid_firmware=edid/1680x1050.bin"
+# -----------------------------------------------
+# 1600x1200 without monitor data using generic information
+#setenv videoconfig "drm_kms_helper.edid_firmware=edid/1600x1200.bin"
+# -----------------------------------------------
+# 1600x900 without monitor data using generic information
+#setenv videoconfig "drm_kms_helper.edid_firmware=edid/1600x900.bin"
+# -----------------------------------------------
+# 1400x1050 60hz without monitor data using generic information
+#setenv videoconfig "drm_kms_helper.edid_firmware=edid/1400x1050.bin"
+# -----------------------------------------------
+# 1440x900 with monitor provided EDID information.
+#setenv videoconfig "video=HDMI-A-1:1440x900@60"
+# -----------------------------------------------
+# 1440x900 without monitor data using generic information
+#setenv videoconfig "drm_kms_helper.edid_firmware=edid/1440x900.bin"
+# -----------------------------------------------
+# 1366x768 without monitor data using generic information
+#setenv videoconfig "drm_kms_helper.edid_firmware=edid/1366x768.bin"
+# -----------------------------------------------
+# 1360x768 without monitor data using generic information
+#setenv videoconfig "drm_kms_helper.edid_firmware=edid/1360x768.bin"
+# -----------------------------------------------
+# 1280x1024 without monitor data using generic information
+#setenv videoconfig "drm_kms_helper.edid_firmware=edid/1280x1024.bin"
+# -----------------------------------------------
+# 1280x768 60hz without monitor data using generic information
+#setenv videoconfig "drm_kms_helper.edid_firmware=edid/1280x768.bin"
+# -----------------------------------------------
+# 1280x720 (720P) with monitor provided EDID information. (720p-edid)
+#setenv videoconfig "video=HDMI-A-1:1280x720@60"
+# -----------------------------------------------
+# 1280x720 (720P) without monitor data using generic information (720p-noedid)
+#setenv videoconfig "drm_kms_helper.edid_firmware=edid/1280x720.bin"
+# -----------------------------------------------
+# 1152x864 75hz without monitor data using generic information
+#setenv videoconfig "drm_kms_helper.edid_firmware=edid/1152x864_75hz.bin"
+# -----------------------------------------------
+# 1024x768 without monitor data using generic information
+#setenv videoconfig "drm_kms_helper.edid_firmware=edid/1024x768.bin"
+# -----------------------------------------------
+# 1024x600 without monitor data using generic information (ODROID VU7+)
+#setenv videoconfig "drm_kms_helper.edid_firmware=edid/1024x600.bin"
+# -----------------------------------------------
+# 800x600 without monitor data using generic information
+#setenv videoconfig "drm_kms_helper.edid_firmware=edid/800x600.bin"
+# -----------------------------------------------
+# 848x480 60hz without monitor data using generic information
+#setenv videoconfig "drm_kms_helper.edid_firmware=edid/848x480.bin"
+# -----------------------------------------------
+# 800x480 without monitor data using generic information (ODROID 7")
+#setenv videoconfig "drm_kms_helper.edid_firmware=edid/800x480.bin"
+# -----------------------------------------------
+# 720x576 without monitor data using generic information
+#setenv videoconfig "drm_kms_helper.edid_firmware=edid/720x576.bin"
+# -----------------------------------------------
+# 720x480 without monitor data using generic information
+#setenv videoconfig "drm_kms_helper.edid_firmware=edid/720x480.bin"
+# -----------------------------------------------
+# 640x480 without monitor data using generic information
+#setenv videoconfig "drm_kms_helper.edid_firmware=edid/640x480.bin"
+# -----------------------------------------------
+# 480x800 without monitor data using generic information
+#setenv videoconfig "drm_kms_helper.edid_firmware=edid/480x800.bin"
+# -----------------------------------------------
+
+# ODROID-VU7 touchscreen: "false" or "true", defaults to "true"
+#setenv disable_vu7 "false"
+
+# ODROID CloudShell2 TFT LCD and FAN control via I2C bus: "false" or "true", defaults to "false"
+#setenv cs2enable "true"
+
+# Device tree overlays
+# - See /boot/dtb/overlays for available overlays: defaults to empty string ""
+#setenv overlays "i2c0"
+
+# CPU governor
+# - DietPi will override this setting to user configured in dietpi-config > Performance Options > CPU governor
+setenv governor "performance"
+
+# DDR frequency [MHz]: "933", "825", "728" or "633", defaults to "825"
+#setenv ddr_freq "933"
+
+# TMDS data amplitude control.
+# - 1LSB corresponds to 20 mVdiff amplitude level
+# - tx_amp_lvl : 0 = 760 mVdiff(Min), 31 = 1380 mVdiff(Max)
+# - Hardkernel default: hdmi_tx_amp_lvl = 31(1380 mVdiff)
+setenv hdmi_tx_amp_lvl "31"
+
+# TMDS data amplitude fine control for each channel
+# - 1LSB corresponds to 20 mVdiff amplitude level
+# - tx_lvl : 0 = 0 mVdiff(Min), 3 = 60 mVdiff(Max)
+# - Hardkernel default: hdmi_tx_lvl_ch0=hdmi_tx_lvl_ch1=hdmi_tx_lvl_ch2 = 3
+setenv hdmi_tx_lvl_ch0 "3"
+setenv hdmi_tx_lvl_ch1 "3"
+setenv hdmi_tx_lvl_ch2 "3"
+
+# TMDS data pre-emphasis level control
+# - 1LSB corresponds to -0.45dB emphasis level except for 1
+# - tx_emp_lvl : 0 = 0 db(Min), 1 = -0.25 db, 2 = 0.7 db, 15 = -7.45 db(Max)
+# - Hardkernel default: hdmi_tx_emp_lvl = 6 (-2.50 db)
+setenv hdmi_tx_emp_lvl "6"
+
+# TMDS clock amplitude control
+# - 1LSB corresponds to 20 mVdiff amplitude level.
+# - clk_amp_lvl : 0 = 790 mVdiff(Min), 31 = 1410 mVdiff(Max)
+# - Hardkernel default hdmi_clk_amp_lvl = 31 (1410 mVdiff)
+setenv hdmi_clk_amp_lvl "31"
+
+# TMDS data source termination resistor control
+# - tx_res : 0 = Source Termination OFF(Min), 1 = 200 ohm, 2 = 300 ohm, 3 = 120 ohm(Max)
+# - Hardkernel default hdmi_tx_res = 0 (Source Termination OFF)
+setenv hdmi_tx_res "0"
+
+### DO NOT EDIT ANYTHING BELOW THIS LINE ###
+
+setenv hdmi_phy_control "hdmi_tx_amp_lvl=${hdmi_tx_amp_lvl} hdmi_tx_lvl_ch0=${hdmi_tx_lvl_ch0} hdmi_tx_lvl_ch1=${hdmi_tx_lvl_ch1} hdmi_tx_lvl_ch2=${hdmi_tx_lvl_ch2} hdmi_tx_emp_lvl=${hdmi_tx_emp_lvl} hdmi_clk_amp_lvl=${hdmi_clk_amp_lvl} hdmi_tx_res=${hdmi_tx_res} HPD=${HPD} vout=${vout}"
+
+# Load kernel, initrd and dtb in that sequence
+ext4load mmc 0:1 0x40008000 /boot/zImage
+ext4load mmc 0:1 0x42000000 /boot/uInitrd
+if test "${board_name}" = "xu4"; then setenv fdtfile "exynos5422-odroidxu4.dtb"; fi
+if test "${board_name}" = "xu3"; then setenv fdtfile "exynos5422-odroidxu3.dtb"; fi
+if test "${board_name}" = "xu3l"; then setenv fdtfile "exynos5422-odroidxu3-lite.dtb"; fi
+if test "${board_name}" = "hc1"; then setenv fdtfile "exynos5422-odroidhc1.dtb"; fi
+ext4load mmc 0:1 0x44000000 /boot/dtb/${fdtfile}
+
+# Set FDT address
+fdt addr 0x44000000
+
+if test "${cecenable}" = "false"; then fdt rm /cec@101B0000; fi
+if test "${disable_vu7}" = "false"; then setenv hid_quirks "usbhid.quirks=0x0eef:0x0005:0x0004"; fi
+
+# Add overlays for CloudShell
+if test "${cs2enable}" = "true"; then
+    for csoverlay in i2c0 i2c1 hktft-cs-ogst; do
+        setenv match "false"
+        for overlay in ${overlays}; do
+            if test "${overlay}" = "${csoverlay}"; then setenv match "true"; fi
+        done
+	if test "${match}" = "false"; then setenv overlays "${overlays} ${csoverlay}"; fi
+    done
+fi
+
+# Load device tree overlays
+if test "x${overlays}" != "x"; then
+    fdt resize 8192
+    for overlay in ${overlays}; do
+        ext4load mmc 0:1 0x60000000 /boot/dtb/overlays/${overlay}.dtbo
+        fdt apply 0x60000000
+    done
+fi
+
+# Set DDR frequency
+if test "x${ddr_freq}" != "x"; then dmc "${ddr_freq}"; fi
+
+# Final boot args (DRM debugging: drm.debug=0xff)
+setenv bootargs "${bootrootfs} ${videoconfig} smsc95xx.macaddr=${macaddr} governor=${governor} ${hdmi_phy_control} ${hid_quirks}"
+
+# Boot the board
+bootz 0x40008000 0x42000000 0x44000000

.build/images/U-Boot/dietpi-initramfs_cleanup

@@ -7,18 +7,24 @@
 version="$1"
 if [ -z "$version" ]
 then
-        echo "W: initramfs-tools: ${DPKG_MAINTSCRIPT_PACKAGE:-kernel package} did not pass a version number" >&2
-        exit 0
+	echo "W: initramfs-tools: ${DPKG_MAINTSCRIPT_PACKAGE:-kernel package} did not pass a version number" >&2
+	exit 0
 fi
 
 # Avoid running multiple times
 if [ "$DEB_MAINT_PARAMS" ]
 then
-        eval set -- "$DEB_MAINT_PARAMS"
-        [ "$1" = 'upgrade' ] || exit 0
+	eval set -- "$DEB_MAINT_PARAMS"
+	[ "$1" = 'upgrade' ] || exit 0
 fi
 
-# Delete unused initrd images
-find /boot -name 'initrd.img-*' -o -name 'uInitrd-*' ! -name "*-$version" -printf 'Removing obsolete file %f\n' -delete
+# Delete unused initramfs images
+files="$(find /boot -maxdepth 1 -name 'initrd.img-*' -o -name 'uInitrd-*')"
+for f in $files
+do
+	[ -d "/lib/modules/${f#*-}" ] || continue
+	echo "Removing obsolete initramfs image: $f"
+	rm "$f"
+done
 
 exit 0