v7.8

+ CHANGELOG | Lighttpd: Resolved an issue where reinstalls on a Bullseye system with DietPi-LetsEncrypt used, erroneously enabled an SSL configuration which could prevent the service start.
+ CHANGELOG | Spelling and minor reordering

CHANGELOG.txt

@@ -3,17 +3,19 @@ v7.8
 
 New SBC support:
 - Radxa Zero | Initial support for this Raspberry Pi Zero form factored (but way more powerful) SBC has been added to DietPi with the hardware ID 74. Many thanks to @almirus and @dhry for helping with testing and debugging an early image: https://github.com/MichaIng/DietPi/issues/4831
-- Raspberry Pi Zero 2 W | Initial support for this Raspberry Pi Zero/Zero W successor has been added, using hardware ID 3 for now (shared with RPi 3/3+), including overclocking profiles. Many thank to @CassTG for providing early hardware information and doing intensive overclocking tests: https://dietpi.com/phpbb/viewtopic.php?t=9599
+- Raspberry Pi Zero 2 W | Initial support for this Raspberry Pi Zero/Zero W successor has been added, using hardware ID 3 for now (shared with RPi 3/3+), including overclocking profiles. Many thanks to @CassTG for providing early hardware information and doing intensive overclocking tests: https://dietpi.com/phpbb/viewtopic.php?t=9599
+
+Removed SBC support:
+- Odroid N1 | There is not a single reported DietPi Odroid N1 system, which makes sense as this model was never really released. Only a small number of developer samples are floating around, not worth to keep maintaining an image and dedicated code. If there are unreported Odroid N1 DietPi systems out there, they will be automatically migrated to the Generic Rockchip RK3399 device ID on DietPi update.
 
 New software:
 - DietPi-Dashboard | Thanks to the great work of @ravenclaw900, we are proud to announce our own official DietPi web interface for monitoring and managing your DietPi system using your web browser. It is still in beta phase as we test and gradually implement more features. We would be happy if you would try it out via "dietpi-software install 200" and give us feedback: https://github.com/MichaIng/DietPi/issues/448
 
 Removed software:
 - Subsonic | Since it is not developed anymore and due to shared library dependencies only compatible with Debian Stretch, we removed Subsonic from DietPi-Software. With Airsonic-Advanced, we'll provide a well maintained and Bullseye-compatible alternative soon. If you currently have Subsonic installed, it will remain. If you want to uninstall it, follow the instructions here: https://github.com/MichaIng/DietPi/pull/4895
-- emonHub | Since we do not have a single reported installation, we removed emonHub from DietPi-Software. If you currently have emonHub installed, it will remain. If you want to keep using and updating it, have a look at the official repository: https://github.com/openenergymonitor/emonhub. If you want to uninstall it, follow the instructions here: https://github.com/MichaIng/DietPi/pull/4895
+- emonHub | Since we do not have a single reported installation, we removed emonHub from DietPi-Software. If you currently have emonHub installed, it will remain. If you want to keep using and updating it, have a look at the official repository at https://github.com/openenergymonitor/emonhub. If you want to uninstall it, follow the instructions here: https://github.com/MichaIng/DietPi/pull/4895
 
 Changes:
-- Odroid N1 | Removed support: We don't have a single reported system, which makes sense as this model was never really released. Only a small number of developer samples are floating around, not worth to keep maintaining an image and dedicated code. If there is really an Odroid N1 DietPi system out there, it will be automatically migrated to the Generic Rockchip RK3399 device ID on DietPi update.
 - DietPi-Config | Overclocking profiles for most Raspberry Pi models have been updated to match the effective 100 MHz ARM/CPU frequency steps used by current firmware. Also an energy saving profile has been added to some models, which reduces minimum and maximum voltage a little, reducing energy consumption and heat emission a little on idle and on load.
 - DietPi-Config | The option to prefer IPv4 connections when IPv6 is enabled has been removed: This only worked for APT and wget, while e.g. cURL and ping were never affected by this setting, which meant an inconsistent behaviour. If one faces issues with IPv6 enabled, it should be simply disabled instead of preferring/forcing IPv4 only for specific tools.
 - DietPi-Backup | A feature has been added to enable daily system backup via cron job. Many thanks to @Lycidias93 for suggesting this feature: https://github.com/MichaIng/DietPi/issues/3871
@@ -41,6 +43,7 @@ Fixes:
 - DietPi-Software | Tor Relay: This software option has been disabled on Stretch. The Tor package shipped by the Debian Stretch repository is too old to support required protocols of the Tor network, when running a relay. Many thanks to @cptechnik for reporting this issue: https://github.com/MichaIng/DietPi/issues/4925
 - DietPi-Software | Deluge: Resolved an issue where on fresh installs the services failed due to an invalid config file syntax. Many thanks to @bookedirl for reporting this issue: https://dietpi.com/phpbb/viewtopic.php?t=9553
 - DietPi-Software | Deluge: As the package from Raspbian Bullseye currently fails, we needed to disable Deluge for Raspberry Pi systems with ARMv6 Bullseye image. The bug has been reported to the Raspbian maintainers and we hope for a fix until next DietPi release: https://github.com/MichaIng/DietPi/issues/4944
+- DietPi-Software | Lighttpd: Resolved an issue where reinstalls on a Bullseye system with DietPi-LetsEncrypt used, erroneously enabled an SSL configuration which could prevent the service start.
 
 As always, many smaller code performance and stability improvements, visual and spelling fixes have been done, too much to list all of them here. Check out all code changes of this release on GitHub: https://github.com/MichaIng/DietPi/pull/4951