v6.26

+ CHANGELOG | RPi4 | The default CPU temperature limit (temp_limit) has been raised from 65°C to 75°C

CHANGELOG.txt

@@ -8,18 +8,19 @@ Changes / Improvements / Optimisations:
 - General | On first boot, when DietPi-Software finishes the initial setup, it is now assured that all APT packages, including firmware, are upgraded by performing an "apt-get dist-upgrade"/"apt full-upgrade". Since it includes upgrades regardless of underlying dependency and conflict changes, which in rare cases can perform unwanted removals, we do not do this on regualar DietPi-Update/Software runs. But on first boot, without additional packages installed yet, it is safe. Many thanks to @cmessin1 for doing this request: https://github.com/MichaIng/DietPi/issues/3098
 - Rochchip | Experimental GPU acceleration support for RK3399 SoCs and ASUS Tinker Board has been re-enabled.
 - RPi | The haveged daemon has been replaced with rng-tools, an alternative which does not work on all devices, but has been proven to work on RPi, is default on Raspbian and uses less RAM on idle.
+- RPi4 | The default CPU temperature limit (temp_limit) has been raised from 65°C to 75°C, since this device runs significantly hotter then previous RPi model. Many thanks to @trueaspects and @Trunkzeh for doing this suggestion: https://github.com/MichaIng/DietPi/issues/3019, https://github.com/MichaIng/DietPi/issues/3151
 - DietPi-Globals | The environment variable $G_USER_INPUTS has been renamed to $G_INTERACTIVE, which describes better what it does. When setting this to "0", DietPi scripts will run non-interactively, i.e. all whiptail dialog prompts and other tasks that require manual user input are skipped. Note that this is not required when running scripts from cron jobs or systemd units, since those have no STDIN attached which makes DietPi scripts run non-interactively automatically. Scripts will stay backwards-compatible, thus respect $G_USER_INPUTS for a while, but please adjust your scripts or docs where you make use of it. Many thanks to @AtkLordOverAll for contributing this change: https://github.com/MichaIng/DietPi/pull/3041
 - DietPi-PostBoot | /var/log/boottime is not created anymore. Please use "systemd-analyze" to get much more accurate and detailed boot information.
 - DietPi-PostBoot | The pre-login banner has been slightly adjusted: Default login credentials are now only shown on first boot, since the information is obsolete when user changed the password. As well an info has been added that one needs to hit <return> to show the username input field.
 - DietPi-Banner/NordVPN: DietPi-NordVPN has a new input command to print the current VPN connection state: "dietpi-nordvpn status". This has been implemented as well into DietPi-Banner to optionally show NordVPN connection state on login automatically. Many thanks to @svh1985 for implementing this feature: https://github.com/MichaIng/DietPi/pull/3084
 - DietPi-NordVPN | Added options for connection up/down scripts, e.g. to implement killswitches, answer inbound connections from outside local network correctly, safe and track connection uptime, and similar tasks. Many thanks to @svh1985 for implementing this feature: https://github.com/MichaIng/DietPi/pull/3047
 - DietPi-Config | Audio Options: Menu has been reworked. Audio capabilities (ALSA) can be enabled and disabled as a separate option. If enabled, generic sound card auto-detection has been added to the bottom of the list for all devices. This allows the selection of generic sound devices on all SBCs, e.g. if unknown to DietPi or if our hard-coded card/device IDs are wrong due to additional attached audio hardware.
-- DietPi-Config | On RPi1/Zero, OpenGL modes/drivers can now be successfully selected/installed from display resolution menu.
-- DietPi-Config | RPi: Update certain config.txt settings to match new firmware version. WiFi and Bluetooth is now disabled via related dtoverlays, which should further reduce hardware and firmware loads.
 - DietPi-Config | Some /etc/modprobe.d/ configs are merged to less files and mostly prefixed with "dietpi-", to allow easier differentiation between Debian/pre-image and DietPi files.
+- DietPi-Config | RPi: Update certain config.txt settings to match new firmware version. WiFi and Bluetooth is now disabled via related dtoverlays, which should further reduce hardware and firmware loads.
 - DietPi-Config | Added overclocking profiles for RPi4. Many thanks to @aftensleuk for request and valuable suggestions: https://dietpi.com/phpbb/viewtopic.php?f=12&t=6225
 - DietPi-Config | RPi: Re-added previously removed options to adjust initial turbo for CPU frequency on boot and to lower the idle CPU frequency. The related firmware issues have been fixed with a recent update: https://github.com/MichaIng/DietPi/issues/3147
 - DietPi-Config | RPi: Removed the option to adjust CPU frequency limits. On RPi the dynamic CPU governors only jump between "arm_freq" and "arm_freq_min", hence those limits should be set via overclocking profile and the newly re-added "ARM Idle Frequency" option.
+- DietPi-Config | RPi1/Zero: OpenGL modes/drivers can now be successfully selected/installed from display resolution menu.
 - DietPi-Software | TightVPN: Since Stretch, TightVPN has been replaced by TigerVPN, thus the install option has now been removed from code.
 - DietPi-Software | SDL2: Since we ship a tailored build for Amiberry, the general install option for SDL2 has been removed, instead it will be installed/updated along with Amiberry. If you require SDL2 for any other purpose, please install the "libsdl2-2.0.0" package from APT repository: https://packages.debian.org/libsdl2
 - DietPi-Software | Pi-hole: Logging to /var/log/pihole.log is now disabled by default, since it is not required in usual cases. Query logs, shown in web UI, are stored in database. This might also resolve possible pihole-FTL crashes in combination with DietPi-RAMlog and DietPi-Logclear. Many thanks to @kuerious for reporting and @Mcat12 for providing helpful information on this topic: https://github.com/pi-hole/FTL/issues/614